| /* |
| * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver |
| * |
| * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk.h> |
| #include <linux/mmc/host.h> |
| #include <linux/platform_device.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| |
| #include <asm/dma.h> |
| |
| #include <asm/arch/regs-sdi.h> |
| #include <asm/arch/regs-gpio.h> |
| |
| #include <asm/plat-s3c24xx/mci.h> |
| |
| #include "s3cmci.h" |
| |
| #define DRIVER_NAME "s3c-mci" |
| |
| enum dbg_channels { |
| dbg_err = (1 << 0), |
| dbg_debug = (1 << 1), |
| dbg_info = (1 << 2), |
| dbg_irq = (1 << 3), |
| dbg_sg = (1 << 4), |
| dbg_dma = (1 << 5), |
| dbg_pio = (1 << 6), |
| dbg_fail = (1 << 7), |
| dbg_conf = (1 << 8), |
| }; |
| |
| static const int dbgmap_err = dbg_err | dbg_fail; |
| static const int dbgmap_info = dbg_info | dbg_conf; |
| static const int dbgmap_debug = dbg_debug; |
| |
| #define dbg(host, channels, args...) \ |
| do { \ |
| if (dbgmap_err & channels) \ |
| dev_err(&host->pdev->dev, args); \ |
| else if (dbgmap_info & channels) \ |
| dev_info(&host->pdev->dev, args); \ |
| else if (dbgmap_debug & channels) \ |
| dev_dbg(&host->pdev->dev, args); \ |
| } while (0) |
| |
| #define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) |
| |
| static struct s3c2410_dma_client s3cmci_dma_client = { |
| .name = "s3c-mci", |
| }; |
| |
| static void finalize_request(struct s3cmci_host *host); |
| static void s3cmci_send_request(struct mmc_host *mmc); |
| static void s3cmci_reset(struct s3cmci_host *host); |
| |
| #ifdef CONFIG_MMC_DEBUG |
| |
| static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) |
| { |
| u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize; |
| u32 datcon, datcnt, datsta, fsta, imask; |
| |
| con = readl(host->base + S3C2410_SDICON); |
| pre = readl(host->base + S3C2410_SDIPRE); |
| cmdarg = readl(host->base + S3C2410_SDICMDARG); |
| cmdcon = readl(host->base + S3C2410_SDICMDCON); |
| cmdsta = readl(host->base + S3C2410_SDICMDSTAT); |
| r0 = readl(host->base + S3C2410_SDIRSP0); |
| r1 = readl(host->base + S3C2410_SDIRSP1); |
| r2 = readl(host->base + S3C2410_SDIRSP2); |
| r3 = readl(host->base + S3C2410_SDIRSP3); |
| timer = readl(host->base + S3C2410_SDITIMER); |
| bsize = readl(host->base + S3C2410_SDIBSIZE); |
| datcon = readl(host->base + S3C2410_SDIDCON); |
| datcnt = readl(host->base + S3C2410_SDIDCNT); |
| datsta = readl(host->base + S3C2410_SDIDSTA); |
| fsta = readl(host->base + S3C2410_SDIFSTA); |
| imask = readl(host->base + host->sdiimsk); |
| |
| dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n", |
| prefix, con, pre, timer); |
| |
| dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n", |
| prefix, cmdcon, cmdarg, cmdsta); |
| |
| dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]" |
| " DSTA:[%08x] DCNT:[%08x]\n", |
| prefix, datcon, fsta, datsta, datcnt); |
| |
| dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]" |
| " R2:[%08x] R3:[%08x]\n", |
| prefix, r0, r1, r2, r3); |
| } |
| |
| static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, |
| int stop) |
| { |
| snprintf(host->dbgmsg_cmd, 300, |
| "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u", |
| host->ccnt, (stop ? " (STOP)" : ""), |
| cmd->opcode, cmd->arg, cmd->flags, cmd->retries); |
| |
| if (cmd->data) { |
| snprintf(host->dbgmsg_dat, 300, |
| "#%u bsize:%u blocks:%u bytes:%u", |
| host->dcnt, cmd->data->blksz, |
| cmd->data->blocks, |
| cmd->data->blocks * cmd->data->blksz); |
| } else { |
| host->dbgmsg_dat[0] = '\0'; |
| } |
| } |
| |
| static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, |
| int fail) |
| { |
| unsigned int dbglvl = fail ? dbg_fail : dbg_debug; |
| |
| if (!cmd) |
| return; |
| |
| if (cmd->error == 0) { |
| dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n", |
| host->dbgmsg_cmd, cmd->resp[0]); |
| } else { |
| dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n", |
| cmd->error, host->dbgmsg_cmd, host->status); |
| } |
| |
| if (!cmd->data) |
| return; |
| |
| if (cmd->data->error == 0) { |
| dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat); |
| } else { |
| dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n", |
| cmd->data->error, host->dbgmsg_dat, |
| readl(host->base + S3C2410_SDIDCNT)); |
| } |
| } |
| #else |
| static void dbg_dumpcmd(struct s3cmci_host *host, |
| struct mmc_command *cmd, int fail) { } |
| |
| static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, |
| int stop) { } |
| |
| static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { } |
| |
| #endif /* CONFIG_MMC_DEBUG */ |
| |
| static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) |
| { |
| u32 newmask; |
| |
| newmask = readl(host->base + host->sdiimsk); |
| newmask |= imask; |
| |
| writel(newmask, host->base + host->sdiimsk); |
| |
| return newmask; |
| } |
| |
| static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) |
| { |
| u32 newmask; |
| |
| newmask = readl(host->base + host->sdiimsk); |
| newmask &= ~imask; |
| |
| writel(newmask, host->base + host->sdiimsk); |
| |
| return newmask; |
| } |
| |
| static inline void clear_imask(struct s3cmci_host *host) |
| { |
| writel(0, host->base + host->sdiimsk); |
| } |
| |
| static inline int get_data_buffer(struct s3cmci_host *host, |
| u32 *words, u32 **pointer) |
| { |
| struct scatterlist *sg; |
| |
| if (host->pio_active == XFER_NONE) |
| return -EINVAL; |
| |
| if ((!host->mrq) || (!host->mrq->data)) |
| return -EINVAL; |
| |
| if (host->pio_sgptr >= host->mrq->data->sg_len) { |
| dbg(host, dbg_debug, "no more buffers (%i/%i)\n", |
| host->pio_sgptr, host->mrq->data->sg_len); |
| return -EBUSY; |
| } |
| sg = &host->mrq->data->sg[host->pio_sgptr]; |
| |
| *words = sg->length >> 2; |
| *pointer = sg_virt(sg); |
| |
| host->pio_sgptr++; |
| |
| dbg(host, dbg_sg, "new buffer (%i/%i)\n", |
| host->pio_sgptr, host->mrq->data->sg_len); |
| |
| return 0; |
| } |
| |
| static inline u32 fifo_count(struct s3cmci_host *host) |
| { |
| u32 fifostat = readl(host->base + S3C2410_SDIFSTA); |
| |
| fifostat &= S3C2410_SDIFSTA_COUNTMASK; |
| return fifostat >> 2; |
| } |
| |
| static inline u32 fifo_free(struct s3cmci_host *host) |
| { |
| u32 fifostat = readl(host->base + S3C2410_SDIFSTA); |
| |
| fifostat &= S3C2410_SDIFSTA_COUNTMASK; |
| return (63 - fifostat) >> 2; |
| } |
| |
| static void do_pio_read(struct s3cmci_host *host) |
| { |
| int res; |
| u32 fifo; |
| void __iomem *from_ptr; |
| |
| /* write real prescaler to host, it might be set slow to fix */ |
| writel(host->prescaler, host->base + S3C2410_SDIPRE); |
| |
| from_ptr = host->base + host->sdidata; |
| |
| while ((fifo = fifo_count(host))) { |
| if (!host->pio_words) { |
| res = get_data_buffer(host, &host->pio_words, |
| &host->pio_ptr); |
| if (res) { |
| host->pio_active = XFER_NONE; |
| host->complete_what = COMPLETION_FINALIZE; |
| |
| dbg(host, dbg_pio, "pio_read(): " |
| "complete (no more data).\n"); |
| return; |
| } |
| |
| dbg(host, dbg_pio, |
| "pio_read(): new target: [%i]@[%p]\n", |
| host->pio_words, host->pio_ptr); |
| } |
| |
| dbg(host, dbg_pio, |
| "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n", |
| fifo, host->pio_words, |
| readl(host->base + S3C2410_SDIDCNT)); |
| |
| if (fifo > host->pio_words) |
| fifo = host->pio_words; |
| |
| host->pio_words -= fifo; |
| host->pio_count += fifo; |
| |
| while (fifo--) |
| *(host->pio_ptr++) = readl(from_ptr); |
| } |
| |
| if (!host->pio_words) { |
| res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); |
| if (res) { |
| dbg(host, dbg_pio, |
| "pio_read(): complete (no more buffers).\n"); |
| host->pio_active = XFER_NONE; |
| host->complete_what = COMPLETION_FINALIZE; |
| |
| return; |
| } |
| } |
| |
| enable_imask(host, |
| S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); |
| } |
| |
| static void do_pio_write(struct s3cmci_host *host) |
| { |
| void __iomem *to_ptr; |
| int res; |
| u32 fifo; |
| |
| to_ptr = host->base + host->sdidata; |
| |
| while ((fifo = fifo_free(host))) { |
| if (!host->pio_words) { |
| res = get_data_buffer(host, &host->pio_words, |
| &host->pio_ptr); |
| if (res) { |
| dbg(host, dbg_pio, |
| "pio_write(): complete (no more data).\n"); |
| host->pio_active = XFER_NONE; |
| |
| return; |
| } |
| |
| dbg(host, dbg_pio, |
| "pio_write(): new source: [%i]@[%p]\n", |
| host->pio_words, host->pio_ptr); |
| |
| } |
| |
| if (fifo > host->pio_words) |
| fifo = host->pio_words; |
| |
| host->pio_words -= fifo; |
| host->pio_count += fifo; |
| |
| while (fifo--) |
| writel(*(host->pio_ptr++), to_ptr); |
| } |
| |
| enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); |
| } |
| |
| static void pio_tasklet(unsigned long data) |
| { |
| struct s3cmci_host *host = (struct s3cmci_host *) data; |
| |
| |
| disable_irq(host->irq); |
| |
| if (host->pio_active == XFER_WRITE) |
| do_pio_write(host); |
| |
| if (host->pio_active == XFER_READ) |
| do_pio_read(host); |
| |
| if (host->complete_what == COMPLETION_FINALIZE) { |
| clear_imask(host); |
| if (host->pio_active != XFER_NONE) { |
| dbg(host, dbg_err, "unfinished %s " |
| "- pio_count:[%u] pio_words:[%u]\n", |
| (host->pio_active == XFER_READ) ? "read" : "write", |
| host->pio_count, host->pio_words); |
| |
| if (host->mrq->data) |
| host->mrq->data->error = -EINVAL; |
| } |
| |
| finalize_request(host); |
| } else |
| enable_irq(host->irq); |
| } |
| |
| /* |
| * ISR for SDI Interface IRQ |
| * Communication between driver and ISR works as follows: |
| * host->mrq points to current request |
| * host->complete_what Indicates when the request is considered done |
| * COMPLETION_CMDSENT when the command was sent |
| * COMPLETION_RSPFIN when a response was received |
| * COMPLETION_XFERFINISH when the data transfer is finished |
| * COMPLETION_XFERFINISH_RSPFIN both of the above. |
| * host->complete_request is the completion-object the driver waits for |
| * |
| * 1) Driver sets up host->mrq and host->complete_what |
| * 2) Driver prepares the transfer |
| * 3) Driver enables interrupts |
| * 4) Driver starts transfer |
| * 5) Driver waits for host->complete_rquest |
| * 6) ISR checks for request status (errors and success) |
| * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error |
| * 7) ISR completes host->complete_request |
| * 8) ISR disables interrupts |
| * 9) Driver wakes up and takes care of the request |
| * |
| * Note: "->error"-fields are expected to be set to 0 before the request |
| * was issued by mmc.c - therefore they are only set, when an error |
| * contition comes up |
| */ |
| |
| static irqreturn_t s3cmci_irq(int irq, void *dev_id) |
| { |
| struct s3cmci_host *host = dev_id; |
| struct mmc_command *cmd; |
| u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; |
| u32 mci_cclear, mci_dclear; |
| unsigned long iflags; |
| |
| spin_lock_irqsave(&host->complete_lock, iflags); |
| |
| mci_csta = readl(host->base + S3C2410_SDICMDSTAT); |
| mci_dsta = readl(host->base + S3C2410_SDIDSTA); |
| mci_dcnt = readl(host->base + S3C2410_SDIDCNT); |
| mci_fsta = readl(host->base + S3C2410_SDIFSTA); |
| mci_imsk = readl(host->base + host->sdiimsk); |
| mci_cclear = 0; |
| mci_dclear = 0; |
| |
| if ((host->complete_what == COMPLETION_NONE) || |
| (host->complete_what == COMPLETION_FINALIZE)) { |
| host->status = "nothing to complete"; |
| clear_imask(host); |
| goto irq_out; |
| } |
| |
| if (!host->mrq) { |
| host->status = "no active mrq"; |
| clear_imask(host); |
| goto irq_out; |
| } |
| |
| cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd; |
| |
| if (!cmd) { |
| host->status = "no active cmd"; |
| clear_imask(host); |
| goto irq_out; |
| } |
| |
| if (!host->dodma) { |
| if ((host->pio_active == XFER_WRITE) && |
| (mci_fsta & S3C2410_SDIFSTA_TFDET)) { |
| |
| disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); |
| tasklet_schedule(&host->pio_tasklet); |
| host->status = "pio tx"; |
| } |
| |
| if ((host->pio_active == XFER_READ) && |
| (mci_fsta & S3C2410_SDIFSTA_RFDET)) { |
| |
| disable_imask(host, |
| S3C2410_SDIIMSK_RXFIFOHALF | |
| S3C2410_SDIIMSK_RXFIFOLAST); |
| |
| tasklet_schedule(&host->pio_tasklet); |
| host->status = "pio rx"; |
| } |
| } |
| |
| if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { |
| cmd->error = -ETIMEDOUT; |
| host->status = "error: command timeout"; |
| goto fail_transfer; |
| } |
| |
| if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) { |
| if (host->complete_what == COMPLETION_CMDSENT) { |
| host->status = "ok: command sent"; |
| goto close_transfer; |
| } |
| |
| mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT; |
| } |
| |
| if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { |
| if (cmd->flags & MMC_RSP_CRC) { |
| if (host->mrq->cmd->flags & MMC_RSP_136) { |
| dbg(host, dbg_irq, |
| "fixup: ignore CRC fail with long rsp\n"); |
| } else { |
| /* note, we used to fail the transfer |
| * here, but it seems that this is just |
| * the hardware getting it wrong. |
| * |
| * cmd->error = -EILSEQ; |
| * host->status = "error: bad command crc"; |
| * goto fail_transfer; |
| */ |
| } |
| } |
| |
| mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; |
| } |
| |
| if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) { |
| if (host->complete_what == COMPLETION_RSPFIN) { |
| host->status = "ok: command response received"; |
| goto close_transfer; |
| } |
| |
| if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) |
| host->complete_what = COMPLETION_XFERFINISH; |
| |
| mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN; |
| } |
| |
| /* errors handled after this point are only relevant |
| when a data transfer is in progress */ |
| |
| if (!cmd->data) |
| goto clear_status_bits; |
| |
| /* Check for FIFO failure */ |
| if (host->is2440) { |
| if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { |
| host->mrq->data->error = -EILSEQ; |
| host->status = "error: 2440 fifo failure"; |
| goto fail_transfer; |
| } |
| } else { |
| if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { |
| cmd->data->error = -EILSEQ; |
| host->status = "error: fifo failure"; |
| goto fail_transfer; |
| } |
| } |
| |
| if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { |
| cmd->data->error = -EILSEQ; |
| host->status = "error: bad data crc (outgoing)"; |
| goto fail_transfer; |
| } |
| |
| if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { |
| cmd->data->error = -EILSEQ; |
| host->status = "error: bad data crc (incoming)"; |
| goto fail_transfer; |
| } |
| |
| if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { |
| cmd->data->error = -ETIMEDOUT; |
| host->status = "error: data timeout"; |
| goto fail_transfer; |
| } |
| |
| if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) { |
| if (host->complete_what == COMPLETION_XFERFINISH) { |
| host->status = "ok: data transfer completed"; |
| goto close_transfer; |
| } |
| |
| if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) |
| host->complete_what = COMPLETION_RSPFIN; |
| |
| mci_dclear |= S3C2410_SDIDSTA_XFERFINISH; |
| } |
| |
| clear_status_bits: |
| writel(mci_cclear, host->base + S3C2410_SDICMDSTAT); |
| writel(mci_dclear, host->base + S3C2410_SDIDSTA); |
| |
| goto irq_out; |
| |
| fail_transfer: |
| host->pio_active = XFER_NONE; |
| |
| close_transfer: |
| host->complete_what = COMPLETION_FINALIZE; |
| |
| clear_imask(host); |
| tasklet_schedule(&host->pio_tasklet); |
| |
| goto irq_out; |
| |
| irq_out: |
| dbg(host, dbg_irq, |
| "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n", |
| mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status); |
| |
| spin_unlock_irqrestore(&host->complete_lock, iflags); |
| return IRQ_HANDLED; |
| |
| } |
| |
| /* |
| * ISR for the CardDetect Pin |
| */ |
| |
| static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) |
| { |
| struct s3cmci_host *host = (struct s3cmci_host *)dev_id; |
| |
| dbg(host, dbg_irq, "card detect\n"); |
| |
| mmc_detect_change(host->mmc, 500); |
| |
| return IRQ_HANDLED; |
| } |
| |
| void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id, |
| int size, enum s3c2410_dma_buffresult result) |
| { |
| struct s3cmci_host *host = buf_id; |
| unsigned long iflags; |
| u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt; |
| |
| mci_csta = readl(host->base + S3C2410_SDICMDSTAT); |
| mci_dsta = readl(host->base + S3C2410_SDIDSTA); |
| mci_fsta = readl(host->base + S3C2410_SDIFSTA); |
| mci_dcnt = readl(host->base + S3C2410_SDIDCNT); |
| |
| BUG_ON(!host->mrq); |
| BUG_ON(!host->mrq->data); |
| BUG_ON(!host->dmatogo); |
| |
| spin_lock_irqsave(&host->complete_lock, iflags); |
| |
| if (result != S3C2410_RES_OK) { |
| dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x " |
| "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n", |
| mci_csta, mci_dsta, mci_fsta, |
| mci_dcnt, result, host->dmatogo); |
| |
| goto fail_request; |
| } |
| |
| host->dmatogo--; |
| if (host->dmatogo) { |
| dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] " |
| "DCNT:[%08x] toGo:%u\n", |
| size, mci_dsta, mci_dcnt, host->dmatogo); |
| |
| goto out; |
| } |
| |
| dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", |
| size, mci_dsta, mci_dcnt); |
| |
| host->complete_what = COMPLETION_FINALIZE; |
| |
| out: |
| tasklet_schedule(&host->pio_tasklet); |
| spin_unlock_irqrestore(&host->complete_lock, iflags); |
| return; |
| |
| fail_request: |
| host->mrq->data->error = -EINVAL; |
| host->complete_what = COMPLETION_FINALIZE; |
| writel(0, host->base + host->sdiimsk); |
| goto out; |
| |
| } |
| |
| static void finalize_request(struct s3cmci_host *host) |
| { |
| struct mmc_request *mrq = host->mrq; |
| struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; |
| int debug_as_failure = 0; |
| |
| if (host->complete_what != COMPLETION_FINALIZE) |
| return; |
| |
| if (!mrq) |
| return; |
| |
| if (cmd->data && (cmd->error == 0) && |
| (cmd->data->error == 0)) { |
| if (host->dodma && (!host->dma_complete)) { |
| dbg(host, dbg_dma, "DMA Missing!\n"); |
| return; |
| } |
| } |
| |
| /* Read response from controller. */ |
| cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0); |
| cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1); |
| cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2); |
| cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3); |
| |
| writel(host->prescaler, host->base + S3C2410_SDIPRE); |
| |
| if (cmd->error) |
| debug_as_failure = 1; |
| |
| if (cmd->data && cmd->data->error) |
| debug_as_failure = 1; |
| |
| dbg_dumpcmd(host, cmd, debug_as_failure); |
| |
| /* Cleanup controller */ |
| writel(0, host->base + S3C2410_SDICMDARG); |
| writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); |
| writel(0, host->base + S3C2410_SDICMDCON); |
| writel(0, host->base + host->sdiimsk); |
| |
| if (cmd->data && cmd->error) |
| cmd->data->error = cmd->error; |
| |
| if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) { |
| host->cmd_is_stop = 1; |
| s3cmci_send_request(host->mmc); |
| return; |
| } |
| |
| /* If we have no data transfer we are finished here */ |
| if (!mrq->data) |
| goto request_done; |
| |
| /* Calulate the amout of bytes transfer if there was no error */ |
| if (mrq->data->error == 0) { |
| mrq->data->bytes_xfered = |
| (mrq->data->blocks * mrq->data->blksz); |
| } else { |
| mrq->data->bytes_xfered = 0; |
| } |
| |
| /* If we had an error while transfering data we flush the |
| * DMA channel and the fifo to clear out any garbage. */ |
| if (mrq->data->error != 0) { |
| if (host->dodma) |
| s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); |
| |
| if (host->is2440) { |
| /* Clear failure register and reset fifo. */ |
| writel(S3C2440_SDIFSTA_FIFORESET | |
| S3C2440_SDIFSTA_FIFOFAIL, |
| host->base + S3C2410_SDIFSTA); |
| } else { |
| u32 mci_con; |
| |
| /* reset fifo */ |
| mci_con = readl(host->base + S3C2410_SDICON); |
| mci_con |= S3C2410_SDICON_FIFORESET; |
| |
| writel(mci_con, host->base + S3C2410_SDICON); |
| } |
| } |
| |
| request_done: |
| host->complete_what = COMPLETION_NONE; |
| host->mrq = NULL; |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| |
| void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source) |
| { |
| static enum s3c2410_dmasrc last_source = -1; |
| static int setup_ok; |
| |
| if (last_source == source) |
| return; |
| |
| last_source = source; |
| |
| s3c2410_dma_devconfig(host->dma, source, 3, |
| host->mem->start + host->sdidata); |
| |
| if (!setup_ok) { |
| s3c2410_dma_config(host->dma, 4, |
| (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); |
| s3c2410_dma_set_buffdone_fn(host->dma, |
| s3cmci_dma_done_callback); |
| s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); |
| setup_ok = 1; |
| } |
| } |
| |
| static void s3cmci_send_command(struct s3cmci_host *host, |
| struct mmc_command *cmd) |
| { |
| u32 ccon, imsk; |
| |
| imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT | |
| S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT | |
| S3C2410_SDIIMSK_RESPONSECRC; |
| |
| enable_imask(host, imsk); |
| |
| if (cmd->data) |
| host->complete_what = COMPLETION_XFERFINISH_RSPFIN; |
| else if (cmd->flags & MMC_RSP_PRESENT) |
| host->complete_what = COMPLETION_RSPFIN; |
| else |
| host->complete_what = COMPLETION_CMDSENT; |
| |
| writel(cmd->arg, host->base + S3C2410_SDICMDARG); |
| |
| ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX; |
| ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART; |
| |
| if (cmd->flags & MMC_RSP_PRESENT) |
| ccon |= S3C2410_SDICMDCON_WAITRSP; |
| |
| if (cmd->flags & MMC_RSP_136) |
| ccon |= S3C2410_SDICMDCON_LONGRSP; |
| |
| writel(ccon, host->base + S3C2410_SDICMDCON); |
| } |
| |
| static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) |
| { |
| u32 dcon, imsk, stoptries = 3; |
| |
| /* write DCON register */ |
| |
| if (!data) { |
| writel(0, host->base + S3C2410_SDIDCON); |
| return 0; |
| } |
| |
| while (readl(host->base + S3C2410_SDIDSTA) & |
| (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { |
| |
| dbg(host, dbg_err, |
| "mci_setup_data() transfer stillin progress.\n"); |
| |
| writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); |
| s3cmci_reset(host); |
| |
| if ((stoptries--) == 0) { |
| dbg_dumpregs(host, "DRF"); |
| return -EINVAL; |
| } |
| } |
| |
| dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; |
| |
| if (host->dodma) |
| dcon |= S3C2410_SDIDCON_DMAEN; |
| |
| if (host->bus_width == MMC_BUS_WIDTH_4) |
| dcon |= S3C2410_SDIDCON_WIDEBUS; |
| |
| if (!(data->flags & MMC_DATA_STREAM)) |
| dcon |= S3C2410_SDIDCON_BLOCKMODE; |
| |
| if (data->flags & MMC_DATA_WRITE) { |
| dcon |= S3C2410_SDIDCON_TXAFTERRESP; |
| dcon |= S3C2410_SDIDCON_XFER_TXSTART; |
| } |
| |
| if (data->flags & MMC_DATA_READ) { |
| dcon |= S3C2410_SDIDCON_RXAFTERCMD; |
| dcon |= S3C2410_SDIDCON_XFER_RXSTART; |
| } |
| |
| if (host->is2440) { |
| dcon |= S3C2440_SDIDCON_DS_WORD; |
| dcon |= S3C2440_SDIDCON_DATSTART; |
| } |
| |
| writel(dcon, host->base + S3C2410_SDIDCON); |
| |
| /* write BSIZE register */ |
| |
| writel(data->blksz, host->base + S3C2410_SDIBSIZE); |
| |
| /* add to IMASK register */ |
| imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC | |
| S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH; |
| |
| enable_imask(host, imsk); |
| |
| /* write TIMER register */ |
| |
| if (host->is2440) { |
| writel(0x007FFFFF, host->base + S3C2410_SDITIMER); |
| } else { |
| writel(0x0000FFFF, host->base + S3C2410_SDITIMER); |
| |
| /* FIX: set slow clock to prevent timeouts on read */ |
| if (data->flags & MMC_DATA_READ) |
| writel(0xFF, host->base + S3C2410_SDIPRE); |
| } |
| |
| return 0; |
| } |
| |
| #define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ) |
| |
| static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) |
| { |
| int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; |
| |
| BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); |
| |
| host->pio_sgptr = 0; |
| host->pio_words = 0; |
| host->pio_count = 0; |
| host->pio_active = rw ? XFER_WRITE : XFER_READ; |
| |
| if (rw) { |
| do_pio_write(host); |
| enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); |
| } else { |
| enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF |
| | S3C2410_SDIIMSK_RXFIFOLAST); |
| } |
| |
| return 0; |
| } |
| |
| static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) |
| { |
| int dma_len, i; |
| int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; |
| |
| BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); |
| |
| s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW); |
| s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); |
| |
| dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, |
| (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); |
| |
| if (dma_len == 0) |
| return -ENOMEM; |
| |
| host->dma_complete = 0; |
| host->dmatogo = dma_len; |
| |
| for (i = 0; i < dma_len; i++) { |
| int res; |
| |
| dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i, |
| sg_dma_address(&data->sg[i]), |
| sg_dma_len(&data->sg[i])); |
| |
| res = s3c2410_dma_enqueue(host->dma, (void *) host, |
| sg_dma_address(&data->sg[i]), |
| sg_dma_len(&data->sg[i])); |
| |
| if (res) { |
| s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); |
| return -EBUSY; |
| } |
| } |
| |
| s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); |
| |
| return 0; |
| } |
| |
| static void s3cmci_send_request(struct mmc_host *mmc) |
| { |
| struct s3cmci_host *host = mmc_priv(mmc); |
| struct mmc_request *mrq = host->mrq; |
| struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; |
| |
| host->ccnt++; |
| prepare_dbgmsg(host, cmd, host->cmd_is_stop); |
| |
| /* Clear command, data and fifo status registers |
| Fifo clear only necessary on 2440, but doesn't hurt on 2410 |
| */ |
| writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT); |
| writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA); |
| writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA); |
| |
| if (cmd->data) { |
| int res = s3cmci_setup_data(host, cmd->data); |
| |
| host->dcnt++; |
| |
| if (res) { |
| cmd->error = -EINVAL; |
| cmd->data->error = -EINVAL; |
| |
| mmc_request_done(mmc, mrq); |
| return; |
| } |
| |
| if (host->dodma) |
| res = s3cmci_prepare_dma(host, cmd->data); |
| else |
| res = s3cmci_prepare_pio(host, cmd->data); |
| |
| if (res) { |
| cmd->error = res; |
| cmd->data->error = res; |
| |
| mmc_request_done(mmc, mrq); |
| return; |
| } |
| } |
| |
| /* Send command */ |
| s3cmci_send_command(host, cmd); |
| |
| /* Enable Interrupt */ |
| enable_irq(host->irq); |
| } |
| |
| static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct s3cmci_host *host = mmc_priv(mmc); |
| |
| host->status = "mmc request"; |
| host->cmd_is_stop = 0; |
| host->mrq = mrq; |
| |
| s3cmci_send_request(mmc); |
| } |
| |
| static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct s3cmci_host *host = mmc_priv(mmc); |
| u32 mci_psc, mci_con; |
| |
| /* Set the power state */ |
| |
| mci_con = readl(host->base + S3C2410_SDICON); |
| |
| switch (ios->power_mode) { |
| case MMC_POWER_ON: |
| case MMC_POWER_UP: |
| s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK); |
| s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD); |
| s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0); |
| s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); |
| s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); |
| s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); |
| |
| if (host->pdata->set_power) |
| host->pdata->set_power(ios->power_mode, ios->vdd); |
| |
| if (!host->is2440) |
| mci_con |= S3C2410_SDICON_FIFORESET; |
| |
| break; |
| |
| case MMC_POWER_OFF: |
| default: |
| s3c2410_gpio_setpin(S3C2410_GPE5, 0); |
| s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); |
| |
| if (host->is2440) |
| mci_con |= S3C2440_SDICON_SDRESET; |
| |
| if (host->pdata->set_power) |
| host->pdata->set_power(ios->power_mode, ios->vdd); |
| |
| break; |
| } |
| |
| /* Set clock */ |
| for (mci_psc = 0; mci_psc < 255; mci_psc++) { |
| host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); |
| |
| if (host->real_rate <= ios->clock) |
| break; |
| } |
| |
| if (mci_psc > 255) |
| mci_psc = 255; |
| |
| host->prescaler = mci_psc; |
| writel(host->prescaler, host->base + S3C2410_SDIPRE); |
| |
| /* If requested clock is 0, real_rate will be 0, too */ |
| if (ios->clock == 0) |
| host->real_rate = 0; |
| |
| /* Set CLOCK_ENABLE */ |
| if (ios->clock) |
| mci_con |= S3C2410_SDICON_CLOCKTYPE; |
| else |
| mci_con &= ~S3C2410_SDICON_CLOCKTYPE; |
| |
| writel(mci_con, host->base + S3C2410_SDICON); |
| |
| if ((ios->power_mode == MMC_POWER_ON) || |
| (ios->power_mode == MMC_POWER_UP)) { |
| dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n", |
| host->real_rate/1000, ios->clock/1000); |
| } else { |
| dbg(host, dbg_conf, "powered down.\n"); |
| } |
| |
| host->bus_width = ios->bus_width; |
| } |
| |
| static void s3cmci_reset(struct s3cmci_host *host) |
| { |
| u32 con = readl(host->base + S3C2410_SDICON); |
| |
| con |= S3C2440_SDICON_SDRESET; |
| writel(con, host->base + S3C2410_SDICON); |
| } |
| |
| static int s3cmci_get_ro(struct mmc_host *mmc) |
| { |
| struct s3cmci_host *host = mmc_priv(mmc); |
| struct s3c24xx_mci_pdata *pdata = host->pdata; |
| int ret; |
| |
| if (pdata->gpio_wprotect == 0) |
| return 0; |
| |
| ret = s3c2410_gpio_getpin(pdata->gpio_wprotect); |
| |
| if (pdata->wprotect_invert) |
| ret = !ret; |
| |
| return ret; |
| } |
| |
| static struct mmc_host_ops s3cmci_ops = { |
| .request = s3cmci_request, |
| .set_ios = s3cmci_set_ios, |
| .get_ro = s3cmci_get_ro, |
| }; |
| |
| static struct s3c24xx_mci_pdata s3cmci_def_pdata = { |
| /* This is currently here to avoid a number of if (host->pdata) |
| * checks. Any zero fields to ensure reaonable defaults are picked. */ |
| }; |
| |
| static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) |
| { |
| struct s3cmci_host *host; |
| struct mmc_host *mmc; |
| int ret; |
| |
| mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); |
| if (!mmc) { |
| ret = -ENOMEM; |
| goto probe_out; |
| } |
| |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| host->pdev = pdev; |
| host->is2440 = is2440; |
| |
| host->pdata = pdev->dev.platform_data; |
| if (!host->pdata) { |
| pdev->dev.platform_data = &s3cmci_def_pdata; |
| host->pdata = &s3cmci_def_pdata; |
| } |
| |
| spin_lock_init(&host->complete_lock); |
| tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); |
| |
| if (is2440) { |
| host->sdiimsk = S3C2440_SDIIMSK; |
| host->sdidata = S3C2440_SDIDATA; |
| host->clk_div = 1; |
| } else { |
| host->sdiimsk = S3C2410_SDIIMSK; |
| host->sdidata = S3C2410_SDIDATA; |
| host->clk_div = 2; |
| } |
| |
| host->dodma = 0; |
| host->complete_what = COMPLETION_NONE; |
| host->pio_active = XFER_NONE; |
| |
| host->dma = S3CMCI_DMA; |
| |
| host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!host->mem) { |
| dev_err(&pdev->dev, |
| "failed to get io memory region resouce.\n"); |
| |
| ret = -ENOENT; |
| goto probe_free_host; |
| } |
| |
| host->mem = request_mem_region(host->mem->start, |
| RESSIZE(host->mem), pdev->name); |
| |
| if (!host->mem) { |
| dev_err(&pdev->dev, "failed to request io memory region.\n"); |
| ret = -ENOENT; |
| goto probe_free_host; |
| } |
| |
| host->base = ioremap(host->mem->start, RESSIZE(host->mem)); |
| if (host->base == 0) { |
| dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); |
| ret = -EINVAL; |
| goto probe_free_mem_region; |
| } |
| |
| host->irq = platform_get_irq(pdev, 0); |
| if (host->irq == 0) { |
| dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); |
| ret = -EINVAL; |
| goto probe_iounmap; |
| } |
| |
| if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) { |
| dev_err(&pdev->dev, "failed to request mci interrupt.\n"); |
| ret = -ENOENT; |
| goto probe_iounmap; |
| } |
| |
| /* We get spurious interrupts even when we have set the IMSK |
| * register to ignore everything, so use disable_irq() to make |
| * ensure we don't lock the system with un-serviceable requests. */ |
| |
| disable_irq(host->irq); |
| |
| host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); |
| |
| if (host->irq_cd >= 0) { |
| if (request_irq(host->irq_cd, s3cmci_irq_cd, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| DRIVER_NAME, host)) { |
| dev_err(&pdev->dev, "can't get card detect irq.\n"); |
| ret = -ENOENT; |
| goto probe_free_irq; |
| } |
| } else { |
| dev_warn(&pdev->dev, "host detect has no irq available\n"); |
| s3c2410_gpio_cfgpin(host->pdata->gpio_detect, |
| S3C2410_GPIO_INPUT); |
| } |
| |
| if (host->pdata->gpio_wprotect) |
| s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, |
| S3C2410_GPIO_INPUT); |
| |
| if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) { |
| dev_err(&pdev->dev, "unable to get DMA channel.\n"); |
| ret = -EBUSY; |
| goto probe_free_irq_cd; |
| } |
| |
| host->clk = clk_get(&pdev->dev, "sdi"); |
| if (IS_ERR(host->clk)) { |
| dev_err(&pdev->dev, "failed to find clock source.\n"); |
| ret = PTR_ERR(host->clk); |
| host->clk = NULL; |
| goto probe_free_host; |
| } |
| |
| ret = clk_enable(host->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to enable clock source.\n"); |
| goto clk_free; |
| } |
| |
| host->clk_rate = clk_get_rate(host->clk); |
| |
| mmc->ops = &s3cmci_ops; |
| mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; |
| mmc->caps = MMC_CAP_4_BIT_DATA; |
| mmc->f_min = host->clk_rate / (host->clk_div * 256); |
| mmc->f_max = host->clk_rate / host->clk_div; |
| |
| if (host->pdata->ocr_avail) |
| mmc->ocr_avail = host->pdata->ocr_avail; |
| |
| mmc->max_blk_count = 4095; |
| mmc->max_blk_size = 4095; |
| mmc->max_req_size = 4095 * 512; |
| mmc->max_seg_size = mmc->max_req_size; |
| |
| mmc->max_phys_segs = 128; |
| mmc->max_hw_segs = 128; |
| |
| dbg(host, dbg_debug, |
| "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n", |
| (host->is2440?"2440":""), |
| host->base, host->irq, host->irq_cd, host->dma); |
| |
| ret = mmc_add_host(mmc); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add mmc host.\n"); |
| goto free_dmabuf; |
| } |
| |
| platform_set_drvdata(pdev, mmc); |
| dev_info(&pdev->dev, "initialisation done.\n"); |
| |
| return 0; |
| |
| free_dmabuf: |
| clk_disable(host->clk); |
| |
| clk_free: |
| clk_put(host->clk); |
| |
| probe_free_irq_cd: |
| if (host->irq_cd >= 0) |
| free_irq(host->irq_cd, host); |
| |
| probe_free_irq: |
| free_irq(host->irq, host); |
| |
| probe_iounmap: |
| iounmap(host->base); |
| |
| probe_free_mem_region: |
| release_mem_region(host->mem->start, RESSIZE(host->mem)); |
| |
| probe_free_host: |
| mmc_free_host(mmc); |
| probe_out: |
| return ret; |
| } |
| |
| static int __devexit s3cmci_remove(struct platform_device *pdev) |
| { |
| struct mmc_host *mmc = platform_get_drvdata(pdev); |
| struct s3cmci_host *host = mmc_priv(mmc); |
| |
| mmc_remove_host(mmc); |
| |
| clk_disable(host->clk); |
| clk_put(host->clk); |
| |
| tasklet_disable(&host->pio_tasklet); |
| s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client); |
| |
| if (host->irq_cd >= 0) |
| free_irq(host->irq_cd, host); |
| free_irq(host->irq, host); |
| |
| iounmap(host->base); |
| release_mem_region(host->mem->start, RESSIZE(host->mem)); |
| |
| mmc_free_host(mmc); |
| return 0; |
| } |
| |
| static int __devinit s3cmci_probe_2410(struct platform_device *dev) |
| { |
| return s3cmci_probe(dev, 0); |
| } |
| |
| static int __devinit s3cmci_probe_2412(struct platform_device *dev) |
| { |
| return s3cmci_probe(dev, 1); |
| } |
| |
| static int __devinit s3cmci_probe_2440(struct platform_device *dev) |
| { |
| return s3cmci_probe(dev, 1); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int s3cmci_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| struct mmc_host *mmc = platform_get_drvdata(dev); |
| |
| return mmc_suspend_host(mmc, state); |
| } |
| |
| static int s3cmci_resume(struct platform_device *dev) |
| { |
| struct mmc_host *mmc = platform_get_drvdata(dev); |
| |
| return mmc_resume_host(mmc); |
| } |
| |
| #else /* CONFIG_PM */ |
| #define s3cmci_suspend NULL |
| #define s3cmci_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| |
| static struct platform_driver s3cmci_driver_2410 = { |
| .driver.name = "s3c2410-sdi", |
| .driver.owner = THIS_MODULE, |
| .probe = s3cmci_probe_2410, |
| .remove = __devexit_p(s3cmci_remove), |
| .suspend = s3cmci_suspend, |
| .resume = s3cmci_resume, |
| }; |
| |
| static struct platform_driver s3cmci_driver_2412 = { |
| .driver.name = "s3c2412-sdi", |
| .driver.owner = THIS_MODULE, |
| .probe = s3cmci_probe_2412, |
| .remove = __devexit_p(s3cmci_remove), |
| .suspend = s3cmci_suspend, |
| .resume = s3cmci_resume, |
| }; |
| |
| static struct platform_driver s3cmci_driver_2440 = { |
| .driver.name = "s3c2440-sdi", |
| .driver.owner = THIS_MODULE, |
| .probe = s3cmci_probe_2440, |
| .remove = __devexit_p(s3cmci_remove), |
| .suspend = s3cmci_suspend, |
| .resume = s3cmci_resume, |
| }; |
| |
| |
| static int __init s3cmci_init(void) |
| { |
| platform_driver_register(&s3cmci_driver_2410); |
| platform_driver_register(&s3cmci_driver_2412); |
| platform_driver_register(&s3cmci_driver_2440); |
| return 0; |
| } |
| |
| static void __exit s3cmci_exit(void) |
| { |
| platform_driver_unregister(&s3cmci_driver_2410); |
| platform_driver_unregister(&s3cmci_driver_2412); |
| platform_driver_unregister(&s3cmci_driver_2440); |
| } |
| |
| module_init(s3cmci_init); |
| module_exit(s3cmci_exit); |
| |
| MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>"); |