| /* |
| * chaoskey - driver for ChaosKey device from Altus Metrum. |
| * |
| * This device provides true random numbers using a noise source based |
| * on a reverse-biased p-n junction in avalanche breakdown. More |
| * details can be found at http://chaoskey.org |
| * |
| * The driver connects to the kernel hardware RNG interface to provide |
| * entropy for /dev/random and other kernel activities. It also offers |
| * a separate /dev/ entry to allow for direct access to the random |
| * bit stream. |
| * |
| * Copyright © 2015 Keith Packard <keithp@keithp.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/wait.h> |
| #include <linux/hw_random.h> |
| #include <linux/mutex.h> |
| #include <linux/uaccess.h> |
| |
| static struct usb_driver chaoskey_driver; |
| static struct usb_class_driver chaoskey_class; |
| static int chaoskey_rng_read(struct hwrng *rng, void *data, |
| size_t max, bool wait); |
| |
| #define usb_dbg(usb_if, format, arg...) \ |
| dev_dbg(&(usb_if)->dev, format, ## arg) |
| |
| #define usb_err(usb_if, format, arg...) \ |
| dev_err(&(usb_if)->dev, format, ## arg) |
| |
| /* Version Information */ |
| #define DRIVER_VERSION "v0.1" |
| #define DRIVER_AUTHOR "Keith Packard, keithp@keithp.com" |
| #define DRIVER_DESC "Altus Metrum ChaosKey driver" |
| #define DRIVER_SHORT "chaoskey" |
| |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| #define CHAOSKEY_VENDOR_ID 0x1d50 /* OpenMoko */ |
| #define CHAOSKEY_PRODUCT_ID 0x60c6 /* ChaosKey */ |
| |
| #define CHAOSKEY_BUF_LEN 64 /* max size of USB full speed packet */ |
| |
| #define NAK_TIMEOUT (HZ) /* stall/wait timeout for device */ |
| |
| #ifdef CONFIG_USB_DYNAMIC_MINORS |
| #define USB_CHAOSKEY_MINOR_BASE 0 |
| #else |
| |
| /* IOWARRIOR_MINOR_BASE + 16, not official yet */ |
| #define USB_CHAOSKEY_MINOR_BASE 224 |
| #endif |
| |
| static const struct usb_device_id chaoskey_table[] = { |
| { USB_DEVICE(CHAOSKEY_VENDOR_ID, CHAOSKEY_PRODUCT_ID) }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(usb, chaoskey_table); |
| |
| static void chaos_read_callback(struct urb *urb); |
| |
| /* Driver-local specific stuff */ |
| struct chaoskey { |
| struct usb_interface *interface; |
| char in_ep; |
| struct mutex lock; |
| struct mutex rng_lock; |
| int open; /* open count */ |
| bool present; /* device not disconnected */ |
| bool reading; /* ongoing IO */ |
| int size; /* size of buf */ |
| int valid; /* bytes of buf read */ |
| int used; /* bytes of buf consumed */ |
| char *name; /* product + serial */ |
| struct hwrng hwrng; /* Embedded struct for hwrng */ |
| int hwrng_registered; /* registered with hwrng API */ |
| wait_queue_head_t wait_q; /* for timeouts */ |
| struct urb *urb; /* for performing IO */ |
| char *buf; |
| }; |
| |
| static void chaoskey_free(struct chaoskey *dev) |
| { |
| if (dev) { |
| usb_dbg(dev->interface, "free"); |
| usb_free_urb(dev->urb); |
| kfree(dev->name); |
| kfree(dev->buf); |
| kfree(dev); |
| } |
| } |
| |
| static int chaoskey_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev = interface_to_usbdev(interface); |
| struct usb_host_interface *altsetting = interface->cur_altsetting; |
| int i; |
| int in_ep = -1; |
| struct chaoskey *dev; |
| int result = -ENOMEM; |
| int size; |
| |
| usb_dbg(interface, "probe %s-%s", udev->product, udev->serial); |
| |
| /* Find the first bulk IN endpoint and its packet size */ |
| for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { |
| if (usb_endpoint_is_bulk_in(&altsetting->endpoint[i].desc)) { |
| in_ep = usb_endpoint_num(&altsetting->endpoint[i].desc); |
| size = usb_endpoint_maxp(&altsetting->endpoint[i].desc); |
| break; |
| } |
| } |
| |
| /* Validate endpoint and size */ |
| if (in_ep == -1) { |
| usb_dbg(interface, "no IN endpoint found"); |
| return -ENODEV; |
| } |
| if (size <= 0) { |
| usb_dbg(interface, "invalid size (%d)", size); |
| return -ENODEV; |
| } |
| |
| if (size > CHAOSKEY_BUF_LEN) { |
| usb_dbg(interface, "size reduced from %d to %d\n", |
| size, CHAOSKEY_BUF_LEN); |
| size = CHAOSKEY_BUF_LEN; |
| } |
| |
| /* Looks good, allocate and initialize */ |
| |
| dev = kzalloc(sizeof(struct chaoskey), GFP_KERNEL); |
| |
| if (dev == NULL) |
| goto out; |
| |
| dev->buf = kmalloc(size, GFP_KERNEL); |
| |
| if (dev->buf == NULL) |
| goto out; |
| |
| dev->urb = usb_alloc_urb(0, GFP_KERNEL); |
| |
| if (!dev->urb) |
| goto out; |
| |
| usb_fill_bulk_urb(dev->urb, |
| udev, |
| usb_rcvbulkpipe(udev, in_ep), |
| dev->buf, |
| size, |
| chaos_read_callback, |
| dev); |
| |
| /* Construct a name using the product and serial values. Each |
| * device needs a unique name for the hwrng code |
| */ |
| |
| if (udev->product && udev->serial) { |
| dev->name = kmalloc(strlen(udev->product) + 1 + |
| strlen(udev->serial) + 1, GFP_KERNEL); |
| if (dev->name == NULL) |
| goto out; |
| |
| strcpy(dev->name, udev->product); |
| strcat(dev->name, "-"); |
| strcat(dev->name, udev->serial); |
| } |
| |
| dev->interface = interface; |
| |
| dev->in_ep = in_ep; |
| |
| dev->size = size; |
| dev->present = 1; |
| |
| init_waitqueue_head(&dev->wait_q); |
| |
| mutex_init(&dev->lock); |
| mutex_init(&dev->rng_lock); |
| |
| usb_set_intfdata(interface, dev); |
| |
| result = usb_register_dev(interface, &chaoskey_class); |
| if (result) { |
| usb_err(interface, "Unable to allocate minor number."); |
| goto out; |
| } |
| |
| dev->hwrng.name = dev->name ? dev->name : chaoskey_driver.name; |
| dev->hwrng.read = chaoskey_rng_read; |
| |
| /* Set the 'quality' metric. Quality is measured in units of |
| * 1/1024's of a bit ("mills"). This should be set to 1024, |
| * but there is a bug in the hwrng core which masks it with |
| * 1023. |
| * |
| * The patch that has been merged to the crypto development |
| * tree for that bug limits the value to 1024 at most, so by |
| * setting this to 1024 + 1023, we get 1023 before the fix is |
| * merged and 1024 afterwards. We'll patch this driver once |
| * both bits of code are in the same tree. |
| */ |
| dev->hwrng.quality = 1024 + 1023; |
| |
| dev->hwrng_registered = (hwrng_register(&dev->hwrng) == 0); |
| if (!dev->hwrng_registered) |
| usb_err(interface, "Unable to register with hwrng"); |
| |
| usb_enable_autosuspend(udev); |
| |
| usb_dbg(interface, "chaoskey probe success, size %d", dev->size); |
| return 0; |
| |
| out: |
| usb_set_intfdata(interface, NULL); |
| chaoskey_free(dev); |
| return result; |
| } |
| |
| static void chaoskey_disconnect(struct usb_interface *interface) |
| { |
| struct chaoskey *dev; |
| |
| usb_dbg(interface, "disconnect"); |
| dev = usb_get_intfdata(interface); |
| if (!dev) { |
| usb_dbg(interface, "disconnect failed - no dev"); |
| return; |
| } |
| |
| if (dev->hwrng_registered) |
| hwrng_unregister(&dev->hwrng); |
| |
| usb_deregister_dev(interface, &chaoskey_class); |
| |
| usb_set_intfdata(interface, NULL); |
| mutex_lock(&dev->lock); |
| |
| dev->present = 0; |
| usb_poison_urb(dev->urb); |
| |
| if (!dev->open) { |
| mutex_unlock(&dev->lock); |
| chaoskey_free(dev); |
| } else |
| mutex_unlock(&dev->lock); |
| |
| usb_dbg(interface, "disconnect done"); |
| } |
| |
| static int chaoskey_open(struct inode *inode, struct file *file) |
| { |
| struct chaoskey *dev; |
| struct usb_interface *interface; |
| |
| /* get the interface from minor number and driver information */ |
| interface = usb_find_interface(&chaoskey_driver, iminor(inode)); |
| if (!interface) |
| return -ENODEV; |
| |
| usb_dbg(interface, "open"); |
| |
| dev = usb_get_intfdata(interface); |
| if (!dev) { |
| usb_dbg(interface, "open (dev)"); |
| return -ENODEV; |
| } |
| |
| file->private_data = dev; |
| mutex_lock(&dev->lock); |
| ++dev->open; |
| mutex_unlock(&dev->lock); |
| |
| usb_dbg(interface, "open success"); |
| return 0; |
| } |
| |
| static int chaoskey_release(struct inode *inode, struct file *file) |
| { |
| struct chaoskey *dev = file->private_data; |
| struct usb_interface *interface; |
| |
| if (dev == NULL) |
| return -ENODEV; |
| |
| interface = dev->interface; |
| |
| usb_dbg(interface, "release"); |
| |
| mutex_lock(&dev->lock); |
| |
| usb_dbg(interface, "open count at release is %d", dev->open); |
| |
| if (dev->open <= 0) { |
| usb_dbg(interface, "invalid open count (%d)", dev->open); |
| mutex_unlock(&dev->lock); |
| return -ENODEV; |
| } |
| |
| --dev->open; |
| |
| if (!dev->present) { |
| if (dev->open == 0) { |
| mutex_unlock(&dev->lock); |
| chaoskey_free(dev); |
| } else |
| mutex_unlock(&dev->lock); |
| } else |
| mutex_unlock(&dev->lock); |
| |
| usb_dbg(interface, "release success"); |
| return 0; |
| } |
| |
| static void chaos_read_callback(struct urb *urb) |
| { |
| struct chaoskey *dev = urb->context; |
| int status = urb->status; |
| |
| usb_dbg(dev->interface, "callback status (%d)", status); |
| |
| if (status == 0) |
| dev->valid = urb->actual_length; |
| else |
| dev->valid = 0; |
| |
| dev->used = 0; |
| |
| /* must be seen first before validity is announced */ |
| smp_wmb(); |
| |
| dev->reading = false; |
| wake_up(&dev->wait_q); |
| } |
| |
| /* Fill the buffer. Called with dev->lock held |
| */ |
| static int _chaoskey_fill(struct chaoskey *dev) |
| { |
| DEFINE_WAIT(wait); |
| int result; |
| |
| usb_dbg(dev->interface, "fill"); |
| |
| /* Return immediately if someone called before the buffer was |
| * empty */ |
| if (dev->valid != dev->used) { |
| usb_dbg(dev->interface, "not empty yet (valid %d used %d)", |
| dev->valid, dev->used); |
| return 0; |
| } |
| |
| /* Bail if the device has been removed */ |
| if (!dev->present) { |
| usb_dbg(dev->interface, "device not present"); |
| return -ENODEV; |
| } |
| |
| /* Make sure the device is awake */ |
| result = usb_autopm_get_interface(dev->interface); |
| if (result) { |
| usb_dbg(dev->interface, "wakeup failed (result %d)", result); |
| return result; |
| } |
| |
| dev->reading = true; |
| result = usb_submit_urb(dev->urb, GFP_KERNEL); |
| if (result < 0) { |
| result = usb_translate_errors(result); |
| dev->reading = false; |
| goto out; |
| } |
| |
| result = wait_event_interruptible_timeout( |
| dev->wait_q, |
| !dev->reading, |
| NAK_TIMEOUT); |
| |
| if (result < 0) |
| goto out; |
| |
| if (result == 0) |
| result = -ETIMEDOUT; |
| else |
| result = dev->valid; |
| out: |
| /* Let the device go back to sleep eventually */ |
| usb_autopm_put_interface(dev->interface); |
| |
| usb_dbg(dev->interface, "read %d bytes", dev->valid); |
| |
| return result; |
| } |
| |
| static ssize_t chaoskey_read(struct file *file, |
| char __user *buffer, |
| size_t count, |
| loff_t *ppos) |
| { |
| struct chaoskey *dev; |
| ssize_t read_count = 0; |
| int this_time; |
| int result = 0; |
| unsigned long remain; |
| |
| dev = file->private_data; |
| |
| if (dev == NULL || !dev->present) |
| return -ENODEV; |
| |
| usb_dbg(dev->interface, "read %zu", count); |
| |
| while (count > 0) { |
| |
| /* Grab the rng_lock briefly to ensure that the hwrng interface |
| * gets priority over other user access |
| */ |
| result = mutex_lock_interruptible(&dev->rng_lock); |
| if (result) |
| goto bail; |
| mutex_unlock(&dev->rng_lock); |
| |
| result = mutex_lock_interruptible(&dev->lock); |
| if (result) |
| goto bail; |
| if (dev->valid == dev->used) { |
| result = _chaoskey_fill(dev); |
| if (result < 0) { |
| mutex_unlock(&dev->lock); |
| goto bail; |
| } |
| } |
| |
| this_time = dev->valid - dev->used; |
| if (this_time > count) |
| this_time = count; |
| |
| remain = copy_to_user(buffer, dev->buf + dev->used, this_time); |
| if (remain) { |
| result = -EFAULT; |
| |
| /* Consume the bytes that were copied so we don't leak |
| * data to user space |
| */ |
| dev->used += this_time - remain; |
| mutex_unlock(&dev->lock); |
| goto bail; |
| } |
| |
| count -= this_time; |
| read_count += this_time; |
| buffer += this_time; |
| dev->used += this_time; |
| mutex_unlock(&dev->lock); |
| } |
| bail: |
| if (read_count) { |
| usb_dbg(dev->interface, "read %zu bytes", read_count); |
| return read_count; |
| } |
| usb_dbg(dev->interface, "empty read, result %d", result); |
| if (result == -ETIMEDOUT) |
| result = -EAGAIN; |
| return result; |
| } |
| |
| static int chaoskey_rng_read(struct hwrng *rng, void *data, |
| size_t max, bool wait) |
| { |
| struct chaoskey *dev = container_of(rng, struct chaoskey, hwrng); |
| int this_time; |
| |
| usb_dbg(dev->interface, "rng_read max %zu wait %d", max, wait); |
| |
| if (!dev->present) { |
| usb_dbg(dev->interface, "device not present"); |
| return 0; |
| } |
| |
| /* Hold the rng_lock until we acquire the device lock so that |
| * this operation gets priority over other user access to the |
| * device |
| */ |
| mutex_lock(&dev->rng_lock); |
| |
| mutex_lock(&dev->lock); |
| |
| mutex_unlock(&dev->rng_lock); |
| |
| /* Try to fill the buffer if empty. It doesn't actually matter |
| * if _chaoskey_fill works; we'll just return zero bytes as |
| * the buffer will still be empty |
| */ |
| if (dev->valid == dev->used) |
| (void) _chaoskey_fill(dev); |
| |
| this_time = dev->valid - dev->used; |
| if (this_time > max) |
| this_time = max; |
| |
| memcpy(data, dev->buf + dev->used, this_time); |
| |
| dev->used += this_time; |
| |
| mutex_unlock(&dev->lock); |
| |
| usb_dbg(dev->interface, "rng_read this_time %d\n", this_time); |
| return this_time; |
| } |
| |
| #ifdef CONFIG_PM |
| static int chaoskey_suspend(struct usb_interface *interface, |
| pm_message_t message) |
| { |
| usb_dbg(interface, "suspend"); |
| return 0; |
| } |
| |
| static int chaoskey_resume(struct usb_interface *interface) |
| { |
| usb_dbg(interface, "resume"); |
| return 0; |
| } |
| #else |
| #define chaoskey_suspend NULL |
| #define chaoskey_resume NULL |
| #endif |
| |
| /* file operation pointers */ |
| static const struct file_operations chaoskey_fops = { |
| .owner = THIS_MODULE, |
| .read = chaoskey_read, |
| .open = chaoskey_open, |
| .release = chaoskey_release, |
| .llseek = default_llseek, |
| }; |
| |
| /* class driver information */ |
| static struct usb_class_driver chaoskey_class = { |
| .name = "chaoskey%d", |
| .fops = &chaoskey_fops, |
| .minor_base = USB_CHAOSKEY_MINOR_BASE, |
| }; |
| |
| /* usb specific object needed to register this driver with the usb subsystem */ |
| static struct usb_driver chaoskey_driver = { |
| .name = DRIVER_SHORT, |
| .probe = chaoskey_probe, |
| .disconnect = chaoskey_disconnect, |
| .suspend = chaoskey_suspend, |
| .resume = chaoskey_resume, |
| .reset_resume = chaoskey_resume, |
| .id_table = chaoskey_table, |
| .supports_autosuspend = 1, |
| }; |
| |
| module_usb_driver(chaoskey_driver); |
| |