| /* |
| * USB Attached SCSI |
| * Note that this is not the same as the USB Mass Storage driver |
| * |
| * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 |
| * Copyright Matthew Wilcox for Intel Corp, 2010 |
| * Copyright Sarah Sharp for Intel Corp, 2010 |
| * |
| * Distributed under the terms of the GNU GPL, version two. |
| */ |
| |
| #include <linux/blkdev.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/usb_usual.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/storage.h> |
| #include <linux/usb/uas.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| |
| #include "uas-detect.h" |
| |
| /* |
| * The r00-r01c specs define this version of the SENSE IU data structure. |
| * It's still in use by several different firmware releases. |
| */ |
| struct sense_iu_old { |
| __u8 iu_id; |
| __u8 rsvd1; |
| __be16 tag; |
| __be16 len; |
| __u8 status; |
| __u8 service_response; |
| __u8 sense[SCSI_SENSE_BUFFERSIZE]; |
| }; |
| |
| struct uas_dev_info { |
| struct usb_interface *intf; |
| struct usb_device *udev; |
| struct usb_anchor cmd_urbs; |
| struct usb_anchor sense_urbs; |
| struct usb_anchor data_urbs; |
| int qdepth, resetting; |
| struct response_iu response; |
| unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; |
| unsigned use_streams:1; |
| unsigned uas_sense_old:1; |
| unsigned running_task:1; |
| unsigned shutdown:1; |
| struct scsi_cmnd *cmnd; |
| spinlock_t lock; |
| struct work_struct work; |
| struct list_head inflight_list; |
| struct list_head dead_list; |
| }; |
| |
| enum { |
| SUBMIT_STATUS_URB = (1 << 1), |
| ALLOC_DATA_IN_URB = (1 << 2), |
| SUBMIT_DATA_IN_URB = (1 << 3), |
| ALLOC_DATA_OUT_URB = (1 << 4), |
| SUBMIT_DATA_OUT_URB = (1 << 5), |
| ALLOC_CMD_URB = (1 << 6), |
| SUBMIT_CMD_URB = (1 << 7), |
| COMMAND_INFLIGHT = (1 << 8), |
| DATA_IN_URB_INFLIGHT = (1 << 9), |
| DATA_OUT_URB_INFLIGHT = (1 << 10), |
| COMMAND_COMPLETED = (1 << 11), |
| COMMAND_ABORTED = (1 << 12), |
| UNLINK_DATA_URBS = (1 << 13), |
| IS_IN_WORK_LIST = (1 << 14), |
| }; |
| |
| /* Overrides scsi_pointer */ |
| struct uas_cmd_info { |
| unsigned int state; |
| unsigned int stream; |
| struct urb *cmd_urb; |
| struct urb *data_in_urb; |
| struct urb *data_out_urb; |
| struct list_head list; |
| }; |
| |
| /* I hate forward declarations, but I actually have a loop */ |
| static int uas_submit_urbs(struct scsi_cmnd *cmnd, |
| struct uas_dev_info *devinfo, gfp_t gfp); |
| static void uas_do_work(struct work_struct *work); |
| static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller); |
| static void uas_free_streams(struct uas_dev_info *devinfo); |
| static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller); |
| |
| /* Must be called with devinfo->lock held, will temporary unlock the lock */ |
| static void uas_unlink_data_urbs(struct uas_dev_info *devinfo, |
| struct uas_cmd_info *cmdinfo, |
| unsigned long *lock_flags) |
| { |
| /* |
| * The UNLINK_DATA_URBS flag makes sure uas_try_complete |
| * (called by urb completion) doesn't release cmdinfo |
| * underneath us. |
| */ |
| cmdinfo->state |= UNLINK_DATA_URBS; |
| spin_unlock_irqrestore(&devinfo->lock, *lock_flags); |
| |
| if (cmdinfo->data_in_urb) |
| usb_unlink_urb(cmdinfo->data_in_urb); |
| if (cmdinfo->data_out_urb) |
| usb_unlink_urb(cmdinfo->data_out_urb); |
| |
| spin_lock_irqsave(&devinfo->lock, *lock_flags); |
| cmdinfo->state &= ~UNLINK_DATA_URBS; |
| } |
| |
| static void uas_do_work(struct work_struct *work) |
| { |
| struct uas_dev_info *devinfo = |
| container_of(work, struct uas_dev_info, work); |
| struct uas_cmd_info *cmdinfo; |
| unsigned long flags; |
| int err; |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| list_for_each_entry(cmdinfo, &devinfo->inflight_list, list) { |
| struct scsi_pointer *scp = (void *)cmdinfo; |
| struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, |
| SCp); |
| |
| if (!(cmdinfo->state & IS_IN_WORK_LIST)) |
| continue; |
| |
| err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO); |
| if (!err) |
| cmdinfo->state &= ~IS_IN_WORK_LIST; |
| else |
| schedule_work(&devinfo->work); |
| } |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| } |
| |
| static void uas_mark_cmd_dead(struct uas_dev_info *devinfo, |
| struct uas_cmd_info *cmdinfo, |
| int result, const char *caller) |
| { |
| struct scsi_pointer *scp = (void *)cmdinfo; |
| struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); |
| |
| uas_log_cmd_state(cmnd, caller); |
| WARN_ON_ONCE(!spin_is_locked(&devinfo->lock)); |
| WARN_ON_ONCE(cmdinfo->state & COMMAND_ABORTED); |
| cmdinfo->state |= COMMAND_ABORTED; |
| cmdinfo->state &= ~IS_IN_WORK_LIST; |
| cmnd->result = result << 16; |
| list_move_tail(&cmdinfo->list, &devinfo->dead_list); |
| } |
| |
| static void uas_abort_inflight(struct uas_dev_info *devinfo, int result, |
| const char *caller) |
| { |
| struct uas_cmd_info *cmdinfo; |
| struct uas_cmd_info *temp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| list_for_each_entry_safe(cmdinfo, temp, &devinfo->inflight_list, list) |
| uas_mark_cmd_dead(devinfo, cmdinfo, result, caller); |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| } |
| |
| static void uas_add_work(struct uas_cmd_info *cmdinfo) |
| { |
| struct scsi_pointer *scp = (void *)cmdinfo; |
| struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); |
| struct uas_dev_info *devinfo = cmnd->device->hostdata; |
| |
| WARN_ON_ONCE(!spin_is_locked(&devinfo->lock)); |
| cmdinfo->state |= IS_IN_WORK_LIST; |
| schedule_work(&devinfo->work); |
| } |
| |
| static void uas_zap_dead(struct uas_dev_info *devinfo) |
| { |
| struct uas_cmd_info *cmdinfo; |
| struct uas_cmd_info *temp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| list_for_each_entry_safe(cmdinfo, temp, &devinfo->dead_list, list) { |
| struct scsi_pointer *scp = (void *)cmdinfo; |
| struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, |
| SCp); |
| uas_log_cmd_state(cmnd, __func__); |
| WARN_ON_ONCE(!(cmdinfo->state & COMMAND_ABORTED)); |
| /* all urbs are killed, clear inflight bits */ |
| cmdinfo->state &= ~(COMMAND_INFLIGHT | |
| DATA_IN_URB_INFLIGHT | |
| DATA_OUT_URB_INFLIGHT); |
| uas_try_complete(cmnd, __func__); |
| } |
| devinfo->running_task = 0; |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| } |
| |
| static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) |
| { |
| struct sense_iu *sense_iu = urb->transfer_buffer; |
| struct scsi_device *sdev = cmnd->device; |
| |
| if (urb->actual_length > 16) { |
| unsigned len = be16_to_cpup(&sense_iu->len); |
| if (len + 16 != urb->actual_length) { |
| int newlen = min(len + 16, urb->actual_length) - 16; |
| if (newlen < 0) |
| newlen = 0; |
| sdev_printk(KERN_INFO, sdev, "%s: urb length %d " |
| "disagrees with IU sense data length %d, " |
| "using %d bytes of sense data\n", __func__, |
| urb->actual_length, len, newlen); |
| len = newlen; |
| } |
| memcpy(cmnd->sense_buffer, sense_iu->sense, len); |
| } |
| |
| cmnd->result = sense_iu->status; |
| } |
| |
| static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd) |
| { |
| struct sense_iu_old *sense_iu = urb->transfer_buffer; |
| struct scsi_device *sdev = cmnd->device; |
| |
| if (urb->actual_length > 8) { |
| unsigned len = be16_to_cpup(&sense_iu->len) - 2; |
| if (len + 8 != urb->actual_length) { |
| int newlen = min(len + 8, urb->actual_length) - 8; |
| if (newlen < 0) |
| newlen = 0; |
| sdev_printk(KERN_INFO, sdev, "%s: urb length %d " |
| "disagrees with IU sense data length %d, " |
| "using %d bytes of sense data\n", __func__, |
| urb->actual_length, len, newlen); |
| len = newlen; |
| } |
| memcpy(cmnd->sense_buffer, sense_iu->sense, len); |
| } |
| |
| cmnd->result = sense_iu->status; |
| } |
| |
| static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller) |
| { |
| struct uas_cmd_info *ci = (void *)&cmnd->SCp; |
| |
| scmd_printk(KERN_INFO, cmnd, "%s %p tag %d, inflight:" |
| "%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", |
| caller, cmnd, cmnd->request->tag, |
| (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", |
| (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", |
| (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "", |
| (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "", |
| (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "", |
| (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "", |
| (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "", |
| (ci->state & COMMAND_INFLIGHT) ? " CMD" : "", |
| (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "", |
| (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "", |
| (ci->state & COMMAND_COMPLETED) ? " done" : "", |
| (ci->state & COMMAND_ABORTED) ? " abort" : "", |
| (ci->state & UNLINK_DATA_URBS) ? " unlink": "", |
| (ci->state & IS_IN_WORK_LIST) ? " work" : ""); |
| } |
| |
| static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) |
| { |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; |
| |
| WARN_ON_ONCE(!spin_is_locked(&devinfo->lock)); |
| if (cmdinfo->state & (COMMAND_INFLIGHT | |
| DATA_IN_URB_INFLIGHT | |
| DATA_OUT_URB_INFLIGHT | |
| UNLINK_DATA_URBS)) |
| return -EBUSY; |
| WARN_ON_ONCE(cmdinfo->state & COMMAND_COMPLETED); |
| cmdinfo->state |= COMMAND_COMPLETED; |
| usb_free_urb(cmdinfo->data_in_urb); |
| usb_free_urb(cmdinfo->data_out_urb); |
| if (cmdinfo->state & COMMAND_ABORTED) |
| scmd_printk(KERN_INFO, cmnd, "abort completed\n"); |
| list_del(&cmdinfo->list); |
| cmnd->scsi_done(cmnd); |
| return 0; |
| } |
| |
| static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, |
| unsigned direction) |
| { |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| int err; |
| |
| cmdinfo->state |= direction | SUBMIT_STATUS_URB; |
| err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); |
| if (err) { |
| uas_add_work(cmdinfo); |
| } |
| } |
| |
| static void uas_stat_cmplt(struct urb *urb) |
| { |
| struct iu *iu = urb->transfer_buffer; |
| struct Scsi_Host *shost = urb->context; |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| struct scsi_cmnd *cmnd; |
| struct uas_cmd_info *cmdinfo; |
| unsigned long flags; |
| u16 tag; |
| |
| if (urb->status) { |
| if (urb->status == -ENOENT) { |
| dev_err(&urb->dev->dev, "stat urb: killed, stream %d\n", |
| urb->stream_id); |
| } else { |
| dev_err(&urb->dev->dev, "stat urb: status %d\n", |
| urb->status); |
| } |
| usb_free_urb(urb); |
| return; |
| } |
| |
| if (devinfo->resetting) { |
| usb_free_urb(urb); |
| return; |
| } |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| tag = be16_to_cpup(&iu->tag) - 1; |
| if (tag == 0) |
| cmnd = devinfo->cmnd; |
| else |
| cmnd = scsi_host_find_tag(shost, tag - 1); |
| |
| if (!cmnd) { |
| if (iu->iu_id == IU_ID_RESPONSE) { |
| if (!devinfo->running_task) |
| dev_warn(&urb->dev->dev, |
| "stat urb: recv unexpected response iu\n"); |
| /* store results for uas_eh_task_mgmt() */ |
| memcpy(&devinfo->response, iu, sizeof(devinfo->response)); |
| } |
| usb_free_urb(urb); |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return; |
| } |
| |
| cmdinfo = (void *)&cmnd->SCp; |
| switch (iu->iu_id) { |
| case IU_ID_STATUS: |
| if (devinfo->cmnd == cmnd) |
| devinfo->cmnd = NULL; |
| |
| if (urb->actual_length < 16) |
| devinfo->uas_sense_old = 1; |
| if (devinfo->uas_sense_old) |
| uas_sense_old(urb, cmnd); |
| else |
| uas_sense(urb, cmnd); |
| if (cmnd->result != 0) { |
| /* cancel data transfers on error */ |
| uas_unlink_data_urbs(devinfo, cmdinfo, &flags); |
| } |
| cmdinfo->state &= ~COMMAND_INFLIGHT; |
| uas_try_complete(cmnd, __func__); |
| break; |
| case IU_ID_READ_READY: |
| if (!cmdinfo->data_in_urb || |
| (cmdinfo->state & DATA_IN_URB_INFLIGHT)) { |
| scmd_printk(KERN_ERR, cmnd, "unexpected read rdy\n"); |
| break; |
| } |
| uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); |
| break; |
| case IU_ID_WRITE_READY: |
| if (!cmdinfo->data_out_urb || |
| (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) { |
| scmd_printk(KERN_ERR, cmnd, "unexpected write rdy\n"); |
| break; |
| } |
| uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); |
| break; |
| default: |
| scmd_printk(KERN_ERR, cmnd, |
| "Bogus IU (%d) received on status pipe\n", iu->iu_id); |
| } |
| usb_free_urb(urb); |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| } |
| |
| static void uas_data_cmplt(struct urb *urb) |
| { |
| struct scsi_cmnd *cmnd = urb->context; |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; |
| struct scsi_data_buffer *sdb = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| if (cmdinfo->data_in_urb == urb) { |
| sdb = scsi_in(cmnd); |
| cmdinfo->state &= ~DATA_IN_URB_INFLIGHT; |
| } else if (cmdinfo->data_out_urb == urb) { |
| sdb = scsi_out(cmnd); |
| cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT; |
| } |
| if (sdb == NULL) { |
| WARN_ON_ONCE(1); |
| } else if (urb->status) { |
| if (urb->status != -ECONNRESET) { |
| uas_log_cmd_state(cmnd, __func__); |
| scmd_printk(KERN_ERR, cmnd, |
| "data cmplt err %d stream %d\n", |
| urb->status, urb->stream_id); |
| } |
| /* error: no data transfered */ |
| sdb->resid = sdb->length; |
| } else { |
| sdb->resid = sdb->length - urb->actual_length; |
| } |
| uas_try_complete(cmnd, __func__); |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| } |
| |
| static void uas_cmd_cmplt(struct urb *urb) |
| { |
| struct scsi_cmnd *cmnd = urb->context; |
| |
| if (urb->status) { |
| uas_log_cmd_state(cmnd, __func__); |
| scmd_printk(KERN_ERR, cmnd, "cmd cmplt err %d\n", urb->status); |
| } |
| usb_free_urb(urb); |
| } |
| |
| static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| unsigned int pipe, u16 stream_id, |
| struct scsi_cmnd *cmnd, |
| enum dma_data_direction dir) |
| { |
| struct usb_device *udev = devinfo->udev; |
| struct urb *urb = usb_alloc_urb(0, gfp); |
| struct scsi_data_buffer *sdb = (dir == DMA_FROM_DEVICE) |
| ? scsi_in(cmnd) : scsi_out(cmnd); |
| |
| if (!urb) |
| goto out; |
| usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, |
| uas_data_cmplt, cmnd); |
| urb->stream_id = stream_id; |
| urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; |
| urb->sg = sdb->table.sgl; |
| out: |
| return urb; |
| } |
| |
| static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| struct Scsi_Host *shost, u16 stream_id) |
| { |
| struct usb_device *udev = devinfo->udev; |
| struct urb *urb = usb_alloc_urb(0, gfp); |
| struct sense_iu *iu; |
| |
| if (!urb) |
| goto out; |
| |
| iu = kzalloc(sizeof(*iu), gfp); |
| if (!iu) |
| goto free; |
| |
| usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), |
| uas_stat_cmplt, shost); |
| urb->stream_id = stream_id; |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| out: |
| return urb; |
| free: |
| usb_free_urb(urb); |
| return NULL; |
| } |
| |
| static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| struct scsi_cmnd *cmnd) |
| { |
| struct usb_device *udev = devinfo->udev; |
| struct scsi_device *sdev = cmnd->device; |
| struct urb *urb = usb_alloc_urb(0, gfp); |
| struct command_iu *iu; |
| int len; |
| |
| if (!urb) |
| goto out; |
| |
| len = cmnd->cmd_len - 16; |
| if (len < 0) |
| len = 0; |
| len = ALIGN(len, 4); |
| iu = kzalloc(sizeof(*iu) + len, gfp); |
| if (!iu) |
| goto free; |
| |
| iu->iu_id = IU_ID_COMMAND; |
| if (blk_rq_tagged(cmnd->request)) |
| iu->tag = cpu_to_be16(cmnd->request->tag + 2); |
| else |
| iu->tag = cpu_to_be16(1); |
| iu->prio_attr = UAS_SIMPLE_TAG; |
| iu->len = len; |
| int_to_scsilun(sdev->lun, &iu->lun); |
| memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); |
| |
| usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, |
| uas_cmd_cmplt, cmnd); |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| out: |
| return urb; |
| free: |
| usb_free_urb(urb); |
| return NULL; |
| } |
| |
| static int uas_submit_task_urb(struct scsi_cmnd *cmnd, gfp_t gfp, |
| u8 function, u16 stream_id) |
| { |
| struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; |
| struct usb_device *udev = devinfo->udev; |
| struct urb *urb = usb_alloc_urb(0, gfp); |
| struct task_mgmt_iu *iu; |
| int err = -ENOMEM; |
| |
| if (!urb) |
| goto err; |
| |
| iu = kzalloc(sizeof(*iu), gfp); |
| if (!iu) |
| goto err; |
| |
| iu->iu_id = IU_ID_TASK_MGMT; |
| iu->tag = cpu_to_be16(stream_id); |
| int_to_scsilun(cmnd->device->lun, &iu->lun); |
| |
| iu->function = function; |
| switch (function) { |
| case TMF_ABORT_TASK: |
| if (blk_rq_tagged(cmnd->request)) |
| iu->task_tag = cpu_to_be16(cmnd->request->tag + 2); |
| else |
| iu->task_tag = cpu_to_be16(1); |
| break; |
| } |
| |
| usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu), |
| uas_cmd_cmplt, cmnd); |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| |
| usb_anchor_urb(urb, &devinfo->cmd_urbs); |
| err = usb_submit_urb(urb, gfp); |
| if (err) { |
| usb_unanchor_urb(urb); |
| uas_log_cmd_state(cmnd, __func__); |
| scmd_printk(KERN_ERR, cmnd, "task submission err %d\n", err); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| usb_free_urb(urb); |
| return err; |
| } |
| |
| /* |
| * Why should I request the Status IU before sending the Command IU? Spec |
| * says to, but also says the device may receive them in any order. Seems |
| * daft to me. |
| */ |
| |
| static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, |
| gfp_t gfp, unsigned int stream) |
| { |
| struct Scsi_Host *shost = cmnd->device->host; |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| struct urb *urb; |
| int err; |
| |
| urb = uas_alloc_sense_urb(devinfo, gfp, shost, stream); |
| if (!urb) |
| return NULL; |
| usb_anchor_urb(urb, &devinfo->sense_urbs); |
| err = usb_submit_urb(urb, gfp); |
| if (err) { |
| usb_unanchor_urb(urb); |
| uas_log_cmd_state(cmnd, __func__); |
| shost_printk(KERN_INFO, shost, |
| "sense urb submission error %d stream %d\n", |
| err, stream); |
| usb_free_urb(urb); |
| return NULL; |
| } |
| return urb; |
| } |
| |
| static int uas_submit_urbs(struct scsi_cmnd *cmnd, |
| struct uas_dev_info *devinfo, gfp_t gfp) |
| { |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| struct urb *urb; |
| int err; |
| |
| WARN_ON_ONCE(!spin_is_locked(&devinfo->lock)); |
| if (cmdinfo->state & SUBMIT_STATUS_URB) { |
| urb = uas_submit_sense_urb(cmnd, gfp, cmdinfo->stream); |
| if (!urb) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| cmdinfo->state &= ~SUBMIT_STATUS_URB; |
| } |
| |
| if (cmdinfo->state & ALLOC_DATA_IN_URB) { |
| cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp, |
| devinfo->data_in_pipe, cmdinfo->stream, |
| cmnd, DMA_FROM_DEVICE); |
| if (!cmdinfo->data_in_urb) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| cmdinfo->state &= ~ALLOC_DATA_IN_URB; |
| } |
| |
| if (cmdinfo->state & SUBMIT_DATA_IN_URB) { |
| usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs); |
| err = usb_submit_urb(cmdinfo->data_in_urb, gfp); |
| if (err) { |
| usb_unanchor_urb(cmdinfo->data_in_urb); |
| uas_log_cmd_state(cmnd, __func__); |
| scmd_printk(KERN_INFO, cmnd, |
| "data in urb submission error %d stream %d\n", |
| err, cmdinfo->data_in_urb->stream_id); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| cmdinfo->state &= ~SUBMIT_DATA_IN_URB; |
| cmdinfo->state |= DATA_IN_URB_INFLIGHT; |
| } |
| |
| if (cmdinfo->state & ALLOC_DATA_OUT_URB) { |
| cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp, |
| devinfo->data_out_pipe, cmdinfo->stream, |
| cmnd, DMA_TO_DEVICE); |
| if (!cmdinfo->data_out_urb) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| cmdinfo->state &= ~ALLOC_DATA_OUT_URB; |
| } |
| |
| if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { |
| usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs); |
| err = usb_submit_urb(cmdinfo->data_out_urb, gfp); |
| if (err) { |
| usb_unanchor_urb(cmdinfo->data_out_urb); |
| uas_log_cmd_state(cmnd, __func__); |
| scmd_printk(KERN_INFO, cmnd, |
| "data out urb submission error %d stream %d\n", |
| err, cmdinfo->data_out_urb->stream_id); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; |
| cmdinfo->state |= DATA_OUT_URB_INFLIGHT; |
| } |
| |
| if (cmdinfo->state & ALLOC_CMD_URB) { |
| cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd); |
| if (!cmdinfo->cmd_urb) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| cmdinfo->state &= ~ALLOC_CMD_URB; |
| } |
| |
| if (cmdinfo->state & SUBMIT_CMD_URB) { |
| usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); |
| err = usb_submit_urb(cmdinfo->cmd_urb, gfp); |
| if (err) { |
| usb_unanchor_urb(cmdinfo->cmd_urb); |
| uas_log_cmd_state(cmnd, __func__); |
| scmd_printk(KERN_INFO, cmnd, |
| "cmd urb submission error %d\n", err); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| cmdinfo->cmd_urb = NULL; |
| cmdinfo->state &= ~SUBMIT_CMD_URB; |
| cmdinfo->state |= COMMAND_INFLIGHT; |
| } |
| |
| return 0; |
| } |
| |
| static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, |
| void (*done)(struct scsi_cmnd *)) |
| { |
| struct scsi_device *sdev = cmnd->device; |
| struct uas_dev_info *devinfo = sdev->hostdata; |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| unsigned long flags; |
| int err; |
| |
| BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| |
| if (devinfo->resetting) { |
| cmnd->result = DID_ERROR << 16; |
| cmnd->scsi_done(cmnd); |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return 0; |
| } |
| |
| if (devinfo->cmnd) { |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| |
| memset(cmdinfo, 0, sizeof(*cmdinfo)); |
| |
| if (blk_rq_tagged(cmnd->request)) { |
| cmdinfo->stream = cmnd->request->tag + 2; |
| } else { |
| devinfo->cmnd = cmnd; |
| cmdinfo->stream = 1; |
| } |
| |
| cmnd->scsi_done = done; |
| |
| cmdinfo->state = SUBMIT_STATUS_URB | |
| ALLOC_CMD_URB | SUBMIT_CMD_URB; |
| |
| switch (cmnd->sc_data_direction) { |
| case DMA_FROM_DEVICE: |
| cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; |
| break; |
| case DMA_BIDIRECTIONAL: |
| cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; |
| case DMA_TO_DEVICE: |
| cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; |
| case DMA_NONE: |
| break; |
| } |
| |
| if (!devinfo->use_streams) { |
| cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); |
| cmdinfo->stream = 0; |
| } |
| |
| err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC); |
| if (err) { |
| /* If we did nothing, give up now */ |
| if (cmdinfo->state & SUBMIT_STATUS_URB) { |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| uas_add_work(cmdinfo); |
| } |
| |
| list_add_tail(&cmdinfo->list, &devinfo->inflight_list); |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return 0; |
| } |
| |
| static DEF_SCSI_QCMD(uas_queuecommand) |
| |
| static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd, |
| const char *fname, u8 function) |
| { |
| struct Scsi_Host *shost = cmnd->device->host; |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| u16 tag = devinfo->qdepth; |
| unsigned long flags; |
| struct urb *sense_urb; |
| int result = SUCCESS; |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| |
| if (devinfo->resetting) { |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return FAILED; |
| } |
| |
| if (devinfo->running_task) { |
| shost_printk(KERN_INFO, shost, |
| "%s: %s: error already running a task\n", |
| __func__, fname); |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return FAILED; |
| } |
| |
| devinfo->running_task = 1; |
| memset(&devinfo->response, 0, sizeof(devinfo->response)); |
| sense_urb = uas_submit_sense_urb(cmnd, GFP_NOIO, |
| devinfo->use_streams ? tag : 0); |
| if (!sense_urb) { |
| shost_printk(KERN_INFO, shost, |
| "%s: %s: submit sense urb failed\n", |
| __func__, fname); |
| devinfo->running_task = 0; |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return FAILED; |
| } |
| if (uas_submit_task_urb(cmnd, GFP_NOIO, function, tag)) { |
| shost_printk(KERN_INFO, shost, |
| "%s: %s: submit task mgmt urb failed\n", |
| __func__, fname); |
| devinfo->running_task = 0; |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| usb_kill_urb(sense_urb); |
| return FAILED; |
| } |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| |
| if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 3000) == 0) { |
| /* |
| * Note we deliberately do not clear running_task here. If we |
| * allow new tasks to be submitted, there is no way to figure |
| * out if a received response_iu is for the failed task or for |
| * the new one. A bus-reset will eventually clear running_task. |
| */ |
| shost_printk(KERN_INFO, shost, |
| "%s: %s timed out\n", __func__, fname); |
| return FAILED; |
| } |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| devinfo->running_task = 0; |
| if (be16_to_cpu(devinfo->response.tag) != tag) { |
| shost_printk(KERN_INFO, shost, |
| "%s: %s failed (wrong tag %d/%d)\n", __func__, |
| fname, be16_to_cpu(devinfo->response.tag), tag); |
| result = FAILED; |
| } else if (devinfo->response.response_code != RC_TMF_COMPLETE) { |
| shost_printk(KERN_INFO, shost, |
| "%s: %s failed (rc 0x%x)\n", __func__, |
| fname, devinfo->response.response_code); |
| result = FAILED; |
| } |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| |
| return result; |
| } |
| |
| static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) |
| { |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&devinfo->lock, flags); |
| |
| if (devinfo->resetting) { |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| return FAILED; |
| } |
| |
| uas_mark_cmd_dead(devinfo, cmdinfo, DID_ABORT, __func__); |
| if (cmdinfo->state & COMMAND_INFLIGHT) { |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| ret = uas_eh_task_mgmt(cmnd, "ABORT TASK", TMF_ABORT_TASK); |
| } else { |
| uas_unlink_data_urbs(devinfo, cmdinfo, &flags); |
| uas_try_complete(cmnd, __func__); |
| spin_unlock_irqrestore(&devinfo->lock, flags); |
| ret = SUCCESS; |
| } |
| return ret; |
| } |
| |
| static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd) |
| { |
| sdev_printk(KERN_INFO, cmnd->device, "%s\n", __func__); |
| return uas_eh_task_mgmt(cmnd, "LOGICAL UNIT RESET", |
| TMF_LOGICAL_UNIT_RESET); |
| } |
| |
| static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) |
| { |
| struct scsi_device *sdev = cmnd->device; |
| struct uas_dev_info *devinfo = sdev->hostdata; |
| struct usb_device *udev = devinfo->udev; |
| int err; |
| |
| err = usb_lock_device_for_reset(udev, devinfo->intf); |
| if (err) { |
| shost_printk(KERN_ERR, sdev->host, |
| "%s FAILED to get lock err %d\n", __func__, err); |
| return FAILED; |
| } |
| |
| shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__); |
| devinfo->resetting = 1; |
| uas_abort_inflight(devinfo, DID_RESET, __func__); |
| usb_kill_anchored_urbs(&devinfo->cmd_urbs); |
| usb_kill_anchored_urbs(&devinfo->sense_urbs); |
| usb_kill_anchored_urbs(&devinfo->data_urbs); |
| uas_zap_dead(devinfo); |
| err = usb_reset_device(udev); |
| devinfo->resetting = 0; |
| |
| usb_unlock_device(udev); |
| |
| if (err) { |
| shost_printk(KERN_INFO, sdev->host, "%s FAILED\n", __func__); |
| return FAILED; |
| } |
| |
| shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__); |
| return SUCCESS; |
| } |
| |
| static int uas_slave_alloc(struct scsi_device *sdev) |
| { |
| sdev->hostdata = (void *)sdev->host->hostdata; |
| |
| /* USB has unusual DMA-alignment requirements: Although the |
| * starting address of each scatter-gather element doesn't matter, |
| * the length of each element except the last must be divisible |
| * by the Bulk maxpacket value. There's currently no way to |
| * express this by block-layer constraints, so we'll cop out |
| * and simply require addresses to be aligned at 512-byte |
| * boundaries. This is okay since most block I/O involves |
| * hardware sectors that are multiples of 512 bytes in length, |
| * and since host controllers up through USB 2.0 have maxpacket |
| * values no larger than 512. |
| * |
| * But it doesn't suffice for Wireless USB, where Bulk maxpacket |
| * values can be as large as 2048. To make that work properly |
| * will require changes to the block layer. |
| */ |
| blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); |
| |
| return 0; |
| } |
| |
| static int uas_slave_configure(struct scsi_device *sdev) |
| { |
| struct uas_dev_info *devinfo = sdev->hostdata; |
| scsi_set_tag_type(sdev, MSG_ORDERED_TAG); |
| scsi_activate_tcq(sdev, devinfo->qdepth - 2); |
| return 0; |
| } |
| |
| static struct scsi_host_template uas_host_template = { |
| .module = THIS_MODULE, |
| .name = "uas", |
| .queuecommand = uas_queuecommand, |
| .slave_alloc = uas_slave_alloc, |
| .slave_configure = uas_slave_configure, |
| .eh_abort_handler = uas_eh_abort_handler, |
| .eh_device_reset_handler = uas_eh_device_reset_handler, |
| .eh_bus_reset_handler = uas_eh_bus_reset_handler, |
| .can_queue = 65536, /* Is there a limit on the _host_ ? */ |
| .this_id = -1, |
| .sg_tablesize = SG_NONE, |
| .cmd_per_lun = 1, /* until we override it */ |
| .skip_settle_delay = 1, |
| .ordered_tag = 1, |
| }; |
| |
| #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ |
| vendorName, productName, useProtocol, useTransport, \ |
| initFunction, flags) \ |
| { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ |
| .driver_info = (flags) } |
| |
| static struct usb_device_id uas_usb_ids[] = { |
| # include "unusual_uas.h" |
| { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, |
| { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, |
| /* 0xaa is a prototype device I happen to have access to */ |
| { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, 0xaa) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, uas_usb_ids); |
| |
| #undef UNUSUAL_DEV |
| |
| static int uas_switch_interface(struct usb_device *udev, |
| struct usb_interface *intf) |
| { |
| int alt; |
| |
| alt = uas_find_uas_alt_setting(intf); |
| if (alt < 0) |
| return alt; |
| |
| return usb_set_interface(udev, |
| intf->altsetting[0].desc.bInterfaceNumber, alt); |
| } |
| |
| static int uas_configure_endpoints(struct uas_dev_info *devinfo) |
| { |
| struct usb_host_endpoint *eps[4] = { }; |
| struct usb_device *udev = devinfo->udev; |
| int r; |
| |
| devinfo->uas_sense_old = 0; |
| devinfo->cmnd = NULL; |
| |
| r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps); |
| if (r) |
| return r; |
| |
| devinfo->cmd_pipe = usb_sndbulkpipe(udev, |
| usb_endpoint_num(&eps[0]->desc)); |
| devinfo->status_pipe = usb_rcvbulkpipe(udev, |
| usb_endpoint_num(&eps[1]->desc)); |
| devinfo->data_in_pipe = usb_rcvbulkpipe(udev, |
| usb_endpoint_num(&eps[2]->desc)); |
| devinfo->data_out_pipe = usb_sndbulkpipe(udev, |
| usb_endpoint_num(&eps[3]->desc)); |
| |
| if (udev->speed != USB_SPEED_SUPER) { |
| devinfo->qdepth = 256; |
| devinfo->use_streams = 0; |
| } else { |
| devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, |
| 3, 256, GFP_KERNEL); |
| if (devinfo->qdepth < 0) |
| return devinfo->qdepth; |
| devinfo->use_streams = 1; |
| } |
| |
| return 0; |
| } |
| |
| static void uas_free_streams(struct uas_dev_info *devinfo) |
| { |
| struct usb_device *udev = devinfo->udev; |
| struct usb_host_endpoint *eps[3]; |
| |
| eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); |
| eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); |
| eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); |
| usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL); |
| } |
| |
| static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| int result = -ENOMEM; |
| struct Scsi_Host *shost = NULL; |
| struct uas_dev_info *devinfo; |
| struct usb_device *udev = interface_to_usbdev(intf); |
| |
| if (!uas_use_uas_driver(intf, id)) |
| return -ENODEV; |
| |
| if (uas_switch_interface(udev, intf)) |
| return -ENODEV; |
| |
| shost = scsi_host_alloc(&uas_host_template, |
| sizeof(struct uas_dev_info)); |
| if (!shost) |
| goto set_alt0; |
| |
| shost->max_cmd_len = 16 + 252; |
| shost->max_id = 1; |
| shost->max_lun = 256; |
| shost->max_channel = 0; |
| shost->sg_tablesize = udev->bus->sg_tablesize; |
| |
| devinfo = (struct uas_dev_info *)shost->hostdata; |
| devinfo->intf = intf; |
| devinfo->udev = udev; |
| devinfo->resetting = 0; |
| devinfo->running_task = 0; |
| devinfo->shutdown = 0; |
| init_usb_anchor(&devinfo->cmd_urbs); |
| init_usb_anchor(&devinfo->sense_urbs); |
| init_usb_anchor(&devinfo->data_urbs); |
| spin_lock_init(&devinfo->lock); |
| INIT_WORK(&devinfo->work, uas_do_work); |
| INIT_LIST_HEAD(&devinfo->inflight_list); |
| INIT_LIST_HEAD(&devinfo->dead_list); |
| |
| result = uas_configure_endpoints(devinfo); |
| if (result) |
| goto set_alt0; |
| |
| result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2); |
| if (result) |
| goto free_streams; |
| |
| result = scsi_add_host(shost, &intf->dev); |
| if (result) |
| goto free_streams; |
| |
| scsi_scan_host(shost); |
| usb_set_intfdata(intf, shost); |
| return result; |
| |
| free_streams: |
| uas_free_streams(devinfo); |
| set_alt0: |
| usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); |
| if (shost) |
| scsi_host_put(shost); |
| return result; |
| } |
| |
| static int uas_pre_reset(struct usb_interface *intf) |
| { |
| struct Scsi_Host *shost = usb_get_intfdata(intf); |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| unsigned long flags; |
| |
| if (devinfo->shutdown) |
| return 0; |
| |
| /* Block new requests */ |
| spin_lock_irqsave(shost->host_lock, flags); |
| scsi_block_requests(shost); |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| |
| /* Wait for any pending requests to complete */ |
| flush_work(&devinfo->work); |
| if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) { |
| shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); |
| return 1; |
| } |
| |
| uas_free_streams(devinfo); |
| |
| return 0; |
| } |
| |
| static int uas_post_reset(struct usb_interface *intf) |
| { |
| struct Scsi_Host *shost = usb_get_intfdata(intf); |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| unsigned long flags; |
| |
| if (devinfo->shutdown) |
| return 0; |
| |
| if (uas_configure_endpoints(devinfo) != 0) { |
| shost_printk(KERN_ERR, shost, |
| "%s: alloc streams error after reset", __func__); |
| return 1; |
| } |
| |
| spin_lock_irqsave(shost->host_lock, flags); |
| scsi_report_bus_reset(shost, 0); |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| |
| scsi_unblock_requests(shost); |
| |
| return 0; |
| } |
| |
| static int uas_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct Scsi_Host *shost = usb_get_intfdata(intf); |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| |
| /* Wait for any pending requests to complete */ |
| flush_work(&devinfo->work); |
| if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) { |
| shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); |
| return -ETIME; |
| } |
| |
| return 0; |
| } |
| |
| static int uas_resume(struct usb_interface *intf) |
| { |
| return 0; |
| } |
| |
| static int uas_reset_resume(struct usb_interface *intf) |
| { |
| struct Scsi_Host *shost = usb_get_intfdata(intf); |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| unsigned long flags; |
| |
| if (uas_configure_endpoints(devinfo) != 0) { |
| shost_printk(KERN_ERR, shost, |
| "%s: alloc streams error after reset", __func__); |
| return -EIO; |
| } |
| |
| spin_lock_irqsave(shost->host_lock, flags); |
| scsi_report_bus_reset(shost, 0); |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| |
| return 0; |
| } |
| |
| static void uas_disconnect(struct usb_interface *intf) |
| { |
| struct Scsi_Host *shost = usb_get_intfdata(intf); |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| |
| devinfo->resetting = 1; |
| cancel_work_sync(&devinfo->work); |
| uas_abort_inflight(devinfo, DID_NO_CONNECT, __func__); |
| usb_kill_anchored_urbs(&devinfo->cmd_urbs); |
| usb_kill_anchored_urbs(&devinfo->sense_urbs); |
| usb_kill_anchored_urbs(&devinfo->data_urbs); |
| uas_zap_dead(devinfo); |
| scsi_remove_host(shost); |
| uas_free_streams(devinfo); |
| scsi_host_put(shost); |
| } |
| |
| /* |
| * Put the device back in usb-storage mode on shutdown, as some BIOS-es |
| * hang on reboot when the device is still in uas mode. Note the reset is |
| * necessary as some devices won't revert to usb-storage mode without it. |
| */ |
| static void uas_shutdown(struct device *dev) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct Scsi_Host *shost = usb_get_intfdata(intf); |
| struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; |
| |
| if (system_state != SYSTEM_RESTART) |
| return; |
| |
| devinfo->shutdown = 1; |
| uas_free_streams(devinfo); |
| usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); |
| usb_reset_device(udev); |
| } |
| |
| static struct usb_driver uas_driver = { |
| .name = "uas", |
| .probe = uas_probe, |
| .disconnect = uas_disconnect, |
| .pre_reset = uas_pre_reset, |
| .post_reset = uas_post_reset, |
| .suspend = uas_suspend, |
| .resume = uas_resume, |
| .reset_resume = uas_reset_resume, |
| .drvwrap.driver.shutdown = uas_shutdown, |
| .id_table = uas_usb_ids, |
| }; |
| |
| module_usb_driver(uas_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR( |
| "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp"); |