| /* |
| * RapidIO enumeration and discovery support |
| * |
| * Copyright 2005 MontaVista Software, Inc. |
| * Matt Porter <mporter@kernel.crashing.org> |
| * |
| * Copyright 2009 Integrated Device Technology, Inc. |
| * Alex Bounine <alexandre.bounine@idt.com> |
| * - Added Port-Write/Error Management initialization and handling |
| * |
| * Copyright 2009 Sysgo AG |
| * Thomas Moll <thomas.moll@sysgo.com> |
| * - Added Input- Output- enable functionality, to allow full communication |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/init.h> |
| #include <linux/rio.h> |
| #include <linux/rio_drv.h> |
| #include <linux/rio_ids.h> |
| #include <linux/rio_regs.h> |
| #include <linux/module.h> |
| #include <linux/spinlock.h> |
| #include <linux/timer.h> |
| #include <linux/sched.h> |
| #include <linux/jiffies.h> |
| #include <linux/slab.h> |
| |
| #include "rio.h" |
| |
| static void rio_init_em(struct rio_dev *rdev); |
| |
| struct rio_id_table { |
| u16 start; /* logical minimal id */ |
| u32 max; /* max number of IDs in table */ |
| spinlock_t lock; |
| unsigned long table[0]; |
| }; |
| |
| static int next_destid = 0; |
| static int next_comptag = 1; |
| |
| static int rio_mport_phys_table[] = { |
| RIO_EFB_PAR_EP_ID, |
| RIO_EFB_PAR_EP_REC_ID, |
| RIO_EFB_SER_EP_ID, |
| RIO_EFB_SER_EP_REC_ID, |
| -1, |
| }; |
| |
| |
| /** |
| * rio_destid_alloc - Allocate next available destID for given network |
| * @net: RIO network |
| * |
| * Returns next available device destination ID for the specified RIO network. |
| * Marks allocated ID as one in use. |
| * Returns RIO_INVALID_DESTID if new destID is not available. |
| */ |
| static u16 rio_destid_alloc(struct rio_net *net) |
| { |
| int destid; |
| struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data; |
| |
| spin_lock(&idtab->lock); |
| destid = find_first_zero_bit(idtab->table, idtab->max); |
| |
| if (destid < idtab->max) { |
| set_bit(destid, idtab->table); |
| destid += idtab->start; |
| } else |
| destid = RIO_INVALID_DESTID; |
| |
| spin_unlock(&idtab->lock); |
| return (u16)destid; |
| } |
| |
| /** |
| * rio_destid_reserve - Reserve the specivied destID |
| * @net: RIO network |
| * @destid: destID to reserve |
| * |
| * Tries to reserve the specified destID. |
| * Returns 0 if successful. |
| */ |
| static int rio_destid_reserve(struct rio_net *net, u16 destid) |
| { |
| int oldbit; |
| struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data; |
| |
| destid -= idtab->start; |
| spin_lock(&idtab->lock); |
| oldbit = test_and_set_bit(destid, idtab->table); |
| spin_unlock(&idtab->lock); |
| return oldbit; |
| } |
| |
| /** |
| * rio_destid_free - free a previously allocated destID |
| * @net: RIO network |
| * @destid: destID to free |
| * |
| * Makes the specified destID available for use. |
| */ |
| static void rio_destid_free(struct rio_net *net, u16 destid) |
| { |
| struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data; |
| |
| destid -= idtab->start; |
| spin_lock(&idtab->lock); |
| clear_bit(destid, idtab->table); |
| spin_unlock(&idtab->lock); |
| } |
| |
| /** |
| * rio_destid_first - return first destID in use |
| * @net: RIO network |
| */ |
| static u16 rio_destid_first(struct rio_net *net) |
| { |
| int destid; |
| struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data; |
| |
| spin_lock(&idtab->lock); |
| destid = find_first_bit(idtab->table, idtab->max); |
| if (destid >= idtab->max) |
| destid = RIO_INVALID_DESTID; |
| else |
| destid += idtab->start; |
| spin_unlock(&idtab->lock); |
| return (u16)destid; |
| } |
| |
| /** |
| * rio_destid_next - return next destID in use |
| * @net: RIO network |
| * @from: destination ID from which search shall continue |
| */ |
| static u16 rio_destid_next(struct rio_net *net, u16 from) |
| { |
| int destid; |
| struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data; |
| |
| spin_lock(&idtab->lock); |
| destid = find_next_bit(idtab->table, idtab->max, from); |
| if (destid >= idtab->max) |
| destid = RIO_INVALID_DESTID; |
| else |
| destid += idtab->start; |
| spin_unlock(&idtab->lock); |
| return (u16)destid; |
| } |
| |
| /** |
| * rio_get_device_id - Get the base/extended device id for a device |
| * @port: RIO master port |
| * @destid: Destination ID of device |
| * @hopcount: Hopcount to device |
| * |
| * Reads the base/extended device id from a device. Returns the |
| * 8/16-bit device ID. |
| */ |
| static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount) |
| { |
| u32 result; |
| |
| rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result); |
| |
| return RIO_GET_DID(port->sys_size, result); |
| } |
| |
| /** |
| * rio_set_device_id - Set the base/extended device id for a device |
| * @port: RIO master port |
| * @destid: Destination ID of device |
| * @hopcount: Hopcount to device |
| * @did: Device ID value to be written |
| * |
| * Writes the base/extended device id from a device. |
| */ |
| static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did) |
| { |
| rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR, |
| RIO_SET_DID(port->sys_size, did)); |
| } |
| |
| /** |
| * rio_clear_locks- Release all host locks and signal enumeration complete |
| * @net: RIO network to run on |
| * |
| * Marks the component tag CSR on each device with the enumeration |
| * complete flag. When complete, it then release the host locks on |
| * each device. Returns 0 on success or %-EINVAL on failure. |
| */ |
| static int rio_clear_locks(struct rio_net *net) |
| { |
| struct rio_mport *port = net->hport; |
| struct rio_dev *rdev; |
| u32 result; |
| int ret = 0; |
| |
| /* Release host device id locks */ |
| rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR, |
| port->host_deviceid); |
| rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result); |
| if ((result & 0xffff) != 0xffff) { |
| printk(KERN_INFO |
| "RIO: badness when releasing host lock on master port, result %8.8x\n", |
| result); |
| ret = -EINVAL; |
| } |
| list_for_each_entry(rdev, &net->devices, net_list) { |
| rio_write_config_32(rdev, RIO_HOST_DID_LOCK_CSR, |
| port->host_deviceid); |
| rio_read_config_32(rdev, RIO_HOST_DID_LOCK_CSR, &result); |
| if ((result & 0xffff) != 0xffff) { |
| printk(KERN_INFO |
| "RIO: badness when releasing host lock on vid %4.4x did %4.4x\n", |
| rdev->vid, rdev->did); |
| ret = -EINVAL; |
| } |
| |
| /* Mark device as discovered and enable master */ |
| rio_read_config_32(rdev, |
| rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR, |
| &result); |
| result |= RIO_PORT_GEN_DISCOVERED | RIO_PORT_GEN_MASTER; |
| rio_write_config_32(rdev, |
| rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR, |
| result); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * rio_enum_host- Set host lock and initialize host destination ID |
| * @port: Master port to issue transaction |
| * |
| * Sets the local host master port lock and destination ID register |
| * with the host device ID value. The host device ID value is provided |
| * by the platform. Returns %0 on success or %-1 on failure. |
| */ |
| static int rio_enum_host(struct rio_mport *port) |
| { |
| u32 result; |
| |
| /* Set master port host device id lock */ |
| rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR, |
| port->host_deviceid); |
| |
| rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result); |
| if ((result & 0xffff) != port->host_deviceid) |
| return -1; |
| |
| /* Set master port destid and init destid ctr */ |
| rio_local_set_device_id(port, port->host_deviceid); |
| return 0; |
| } |
| |
| /** |
| * rio_device_has_destid- Test if a device contains a destination ID register |
| * @port: Master port to issue transaction |
| * @src_ops: RIO device source operations |
| * @dst_ops: RIO device destination operations |
| * |
| * Checks the provided @src_ops and @dst_ops for the necessary transaction |
| * capabilities that indicate whether or not a device will implement a |
| * destination ID register. Returns 1 if true or 0 if false. |
| */ |
| static int rio_device_has_destid(struct rio_mport *port, int src_ops, |
| int dst_ops) |
| { |
| u32 mask = RIO_OPS_READ | RIO_OPS_WRITE | RIO_OPS_ATOMIC_TST_SWP | RIO_OPS_ATOMIC_INC | RIO_OPS_ATOMIC_DEC | RIO_OPS_ATOMIC_SET | RIO_OPS_ATOMIC_CLR; |
| |
| return !!((src_ops | dst_ops) & mask); |
| } |
| |
| /** |
| * rio_release_dev- Frees a RIO device struct |
| * @dev: LDM device associated with a RIO device struct |
| * |
| * Gets the RIO device struct associated a RIO device struct. |
| * The RIO device struct is freed. |
| */ |
| static void rio_release_dev(struct device *dev) |
| { |
| struct rio_dev *rdev; |
| |
| rdev = to_rio_dev(dev); |
| kfree(rdev); |
| } |
| |
| /** |
| * rio_is_switch- Tests if a RIO device has switch capabilities |
| * @rdev: RIO device |
| * |
| * Gets the RIO device Processing Element Features register |
| * contents and tests for switch capabilities. Returns 1 if |
| * the device is a switch or 0 if it is not a switch. |
| * The RIO device struct is freed. |
| */ |
| static int rio_is_switch(struct rio_dev *rdev) |
| { |
| if (rdev->pef & RIO_PEF_SWITCH) |
| return 1; |
| return 0; |
| } |
| |
| /** |
| * rio_setup_device- Allocates and sets up a RIO device |
| * @net: RIO network |
| * @port: Master port to send transactions |
| * @destid: Current destination ID |
| * @hopcount: Current hopcount |
| * @do_enum: Enumeration/Discovery mode flag |
| * |
| * Allocates a RIO device and configures fields based on configuration |
| * space contents. If device has a destination ID register, a destination |
| * ID is either assigned in enumeration mode or read from configuration |
| * space in discovery mode. If the device has switch capabilities, then |
| * a switch is allocated and configured appropriately. Returns a pointer |
| * to a RIO device on success or NULL on failure. |
| * |
| */ |
| static struct rio_dev *rio_setup_device(struct rio_net *net, |
| struct rio_mport *port, u16 destid, |
| u8 hopcount, int do_enum) |
| { |
| int ret = 0; |
| struct rio_dev *rdev; |
| struct rio_switch *rswitch = NULL; |
| int result, rdid; |
| size_t size; |
| u32 swpinfo = 0; |
| |
| size = sizeof(struct rio_dev); |
| if (rio_mport_read_config_32(port, destid, hopcount, |
| RIO_PEF_CAR, &result)) |
| return NULL; |
| |
| if (result & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) { |
| rio_mport_read_config_32(port, destid, hopcount, |
| RIO_SWP_INFO_CAR, &swpinfo); |
| if (result & RIO_PEF_SWITCH) { |
| size += (RIO_GET_TOTAL_PORTS(swpinfo) * |
| sizeof(rswitch->nextdev[0])) + sizeof(*rswitch); |
| } |
| } |
| |
| rdev = kzalloc(size, GFP_KERNEL); |
| if (!rdev) |
| return NULL; |
| |
| rdev->net = net; |
| rdev->pef = result; |
| rdev->swpinfo = swpinfo; |
| rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR, |
| &result); |
| rdev->did = result >> 16; |
| rdev->vid = result & 0xffff; |
| rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_INFO_CAR, |
| &rdev->device_rev); |
| rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_ID_CAR, |
| &result); |
| rdev->asm_did = result >> 16; |
| rdev->asm_vid = result & 0xffff; |
| rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_INFO_CAR, |
| &result); |
| rdev->asm_rev = result >> 16; |
| if (rdev->pef & RIO_PEF_EXT_FEATURES) { |
| rdev->efptr = result & 0xffff; |
| rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid, |
| hopcount); |
| |
| rdev->em_efptr = rio_mport_get_feature(port, 0, destid, |
| hopcount, RIO_EFB_ERR_MGMNT); |
| } |
| |
| rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR, |
| &rdev->src_ops); |
| rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR, |
| &rdev->dst_ops); |
| |
| if (do_enum) { |
| /* Assign component tag to device */ |
| if (next_comptag >= 0x10000) { |
| pr_err("RIO: Component Tag Counter Overflow\n"); |
| goto cleanup; |
| } |
| rio_mport_write_config_32(port, destid, hopcount, |
| RIO_COMPONENT_TAG_CSR, next_comptag); |
| rdev->comp_tag = next_comptag++; |
| rdev->do_enum = true; |
| } else { |
| rio_mport_read_config_32(port, destid, hopcount, |
| RIO_COMPONENT_TAG_CSR, |
| &rdev->comp_tag); |
| } |
| |
| if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)) { |
| if (do_enum) { |
| rio_set_device_id(port, destid, hopcount, next_destid); |
| rdev->destid = next_destid; |
| next_destid = rio_destid_alloc(net); |
| } else |
| rdev->destid = rio_get_device_id(port, destid, hopcount); |
| |
| rdev->hopcount = 0xff; |
| } else { |
| /* Switch device has an associated destID which |
| * will be adjusted later |
| */ |
| rdev->destid = destid; |
| rdev->hopcount = hopcount; |
| } |
| |
| /* If a PE has both switch and other functions, show it as a switch */ |
| if (rio_is_switch(rdev)) { |
| rswitch = rdev->rswitch; |
| rswitch->port_ok = 0; |
| spin_lock_init(&rswitch->lock); |
| rswitch->route_table = kzalloc(sizeof(u8)* |
| RIO_MAX_ROUTE_ENTRIES(port->sys_size), |
| GFP_KERNEL); |
| if (!rswitch->route_table) |
| goto cleanup; |
| /* Initialize switch route table */ |
| for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size); |
| rdid++) |
| rswitch->route_table[rdid] = RIO_INVALID_ROUTE; |
| dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id, |
| rdev->comp_tag & RIO_CTAG_UDEVID); |
| |
| if (do_enum) |
| rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0); |
| } else { |
| if (do_enum) |
| /*Enable Input Output Port (transmitter reviever)*/ |
| rio_enable_rx_tx_port(port, 0, destid, hopcount, 0); |
| |
| dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id, |
| rdev->comp_tag & RIO_CTAG_UDEVID); |
| } |
| |
| rdev->dev.parent = &net->dev; |
| rio_attach_device(rdev); |
| rdev->dev.release = rio_release_dev; |
| rdev->dma_mask = DMA_BIT_MASK(32); |
| rdev->dev.dma_mask = &rdev->dma_mask; |
| rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); |
| |
| if (rdev->dst_ops & RIO_DST_OPS_DOORBELL) |
| rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE], |
| 0, 0xffff); |
| |
| ret = rio_add_device(rdev); |
| if (ret) |
| goto cleanup; |
| |
| rio_dev_get(rdev); |
| |
| return rdev; |
| |
| cleanup: |
| if (rswitch) |
| kfree(rswitch->route_table); |
| |
| kfree(rdev); |
| return NULL; |
| } |
| |
| /** |
| * rio_sport_is_active- Tests if a switch port has an active connection. |
| * @port: Master port to send transaction |
| * @destid: Associated destination ID for switch |
| * @hopcount: Hopcount to reach switch |
| * @sport: Switch port number |
| * |
| * Reads the port error status CSR for a particular switch port to |
| * determine if the port has an active link. Returns |
| * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is |
| * inactive. |
| */ |
| static int |
| rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport) |
| { |
| u32 result = 0; |
| u32 ext_ftr_ptr; |
| |
| ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0); |
| |
| while (ext_ftr_ptr) { |
| rio_mport_read_config_32(port, destid, hopcount, |
| ext_ftr_ptr, &result); |
| result = RIO_GET_BLOCK_ID(result); |
| if ((result == RIO_EFB_SER_EP_FREE_ID) || |
| (result == RIO_EFB_SER_EP_FREE_ID_V13P) || |
| (result == RIO_EFB_SER_EP_FREC_ID)) |
| break; |
| |
| ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, |
| ext_ftr_ptr); |
| } |
| |
| if (ext_ftr_ptr) |
| rio_mport_read_config_32(port, destid, hopcount, |
| ext_ftr_ptr + |
| RIO_PORT_N_ERR_STS_CSR(sport), |
| &result); |
| |
| return result & RIO_PORT_N_ERR_STS_PORT_OK; |
| } |
| |
| /** |
| * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device |
| * @port: Master port to send transaction |
| * @hopcount: Number of hops to the device |
| * |
| * Used during enumeration to read the Host Device ID Lock CSR on a |
| * RIO device. Returns the value of the lock register. |
| */ |
| static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount) |
| { |
| u32 result; |
| |
| rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount, |
| RIO_HOST_DID_LOCK_CSR, &result); |
| |
| return (u16) (result & 0xffff); |
| } |
| |
| /** |
| * rio_enum_peer- Recursively enumerate a RIO network through a master port |
| * @net: RIO network being enumerated |
| * @port: Master port to send transactions |
| * @hopcount: Number of hops into the network |
| * @prev: Previous RIO device connected to the enumerated one |
| * @prev_port: Port on previous RIO device |
| * |
| * Recursively enumerates a RIO network. Transactions are sent via the |
| * master port passed in @port. |
| */ |
| static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, |
| u8 hopcount, struct rio_dev *prev, int prev_port) |
| { |
| struct rio_dev *rdev; |
| u32 regval; |
| int tmp; |
| |
| if (rio_mport_chk_dev_access(port, |
| RIO_ANY_DESTID(port->sys_size), hopcount)) { |
| pr_debug("RIO: device access check failed\n"); |
| return -1; |
| } |
| |
| if (rio_get_host_deviceid_lock(port, hopcount) == port->host_deviceid) { |
| pr_debug("RIO: PE already discovered by this host\n"); |
| /* |
| * Already discovered by this host. Add it as another |
| * link to the existing device. |
| */ |
| rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), |
| hopcount, RIO_COMPONENT_TAG_CSR, ®val); |
| |
| if (regval) { |
| rdev = rio_get_comptag((regval & 0xffff), NULL); |
| |
| if (rdev && prev && rio_is_switch(prev)) { |
| pr_debug("RIO: redundant path to %s\n", |
| rio_name(rdev)); |
| prev->rswitch->nextdev[prev_port] = rdev; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Attempt to acquire device lock */ |
| rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size), |
| hopcount, |
| RIO_HOST_DID_LOCK_CSR, port->host_deviceid); |
| while ((tmp = rio_get_host_deviceid_lock(port, hopcount)) |
| < port->host_deviceid) { |
| /* Delay a bit */ |
| mdelay(1); |
| /* Attempt to acquire device lock again */ |
| rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size), |
| hopcount, |
| RIO_HOST_DID_LOCK_CSR, |
| port->host_deviceid); |
| } |
| |
| if (rio_get_host_deviceid_lock(port, hopcount) > port->host_deviceid) { |
| pr_debug( |
| "RIO: PE locked by a higher priority host...retreating\n"); |
| return -1; |
| } |
| |
| /* Setup new RIO device */ |
| rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size), |
| hopcount, 1); |
| if (rdev) { |
| rdev->prev = prev; |
| if (prev && rio_is_switch(prev)) |
| prev->rswitch->nextdev[prev_port] = rdev; |
| } else |
| return -1; |
| |
| if (rio_is_switch(rdev)) { |
| int sw_destid; |
| int cur_destid; |
| int sw_inport; |
| u16 destid; |
| int port_num; |
| |
| sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo); |
| rio_route_add_entry(rdev, RIO_GLOBAL_TABLE, |
| port->host_deviceid, sw_inport, 0); |
| rdev->rswitch->route_table[port->host_deviceid] = sw_inport; |
| |
| destid = rio_destid_first(net); |
| while (destid != RIO_INVALID_DESTID && destid < next_destid) { |
| if (destid != port->host_deviceid) { |
| rio_route_add_entry(rdev, RIO_GLOBAL_TABLE, |
| destid, sw_inport, 0); |
| rdev->rswitch->route_table[destid] = sw_inport; |
| } |
| destid = rio_destid_next(net, destid + 1); |
| } |
| pr_debug( |
| "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n", |
| rio_name(rdev), rdev->vid, rdev->did, |
| RIO_GET_TOTAL_PORTS(rdev->swpinfo)); |
| sw_destid = next_destid; |
| for (port_num = 0; |
| port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo); |
| port_num++) { |
| if (sw_inport == port_num) { |
| rio_enable_rx_tx_port(port, 0, |
| RIO_ANY_DESTID(port->sys_size), |
| hopcount, port_num); |
| rdev->rswitch->port_ok |= (1 << port_num); |
| continue; |
| } |
| |
| cur_destid = next_destid; |
| |
| if (rio_sport_is_active |
| (port, RIO_ANY_DESTID(port->sys_size), hopcount, |
| port_num)) { |
| pr_debug( |
| "RIO: scanning device on port %d\n", |
| port_num); |
| rio_enable_rx_tx_port(port, 0, |
| RIO_ANY_DESTID(port->sys_size), |
| hopcount, port_num); |
| rdev->rswitch->port_ok |= (1 << port_num); |
| rio_route_add_entry(rdev, RIO_GLOBAL_TABLE, |
| RIO_ANY_DESTID(port->sys_size), |
| port_num, 0); |
| |
| if (rio_enum_peer(net, port, hopcount + 1, |
| rdev, port_num) < 0) |
| return -1; |
| |
| /* Update routing tables */ |
| destid = rio_destid_next(net, cur_destid + 1); |
| if (destid != RIO_INVALID_DESTID) { |
| for (destid = cur_destid; |
| destid < next_destid;) { |
| if (destid != port->host_deviceid) { |
| rio_route_add_entry(rdev, |
| RIO_GLOBAL_TABLE, |
| destid, |
| port_num, |
| 0); |
| rdev->rswitch-> |
| route_table[destid] = |
| port_num; |
| } |
| destid = rio_destid_next(net, |
| destid + 1); |
| } |
| } |
| } else { |
| /* If switch supports Error Management, |
| * set PORT_LOCKOUT bit for unused port |
| */ |
| if (rdev->em_efptr) |
| rio_set_port_lockout(rdev, port_num, 1); |
| |
| rdev->rswitch->port_ok &= ~(1 << port_num); |
| } |
| } |
| |
| /* Direct Port-write messages to the enumeratiing host */ |
| if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) && |
| (rdev->em_efptr)) { |
| rio_write_config_32(rdev, |
| rdev->em_efptr + RIO_EM_PW_TGT_DEVID, |
| (port->host_deviceid << 16) | |
| (port->sys_size << 15)); |
| } |
| |
| rio_init_em(rdev); |
| |
| /* Check for empty switch */ |
| if (next_destid == sw_destid) |
| next_destid = rio_destid_alloc(net); |
| |
| rdev->destid = sw_destid; |
| } else |
| pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n", |
| rio_name(rdev), rdev->vid, rdev->did); |
| |
| return 0; |
| } |
| |
| /** |
| * rio_enum_complete- Tests if enumeration of a network is complete |
| * @port: Master port to send transaction |
| * |
| * Tests the PGCCSR discovered bit for non-zero value (enumeration |
| * complete flag). Return %1 if enumeration is complete or %0 if |
| * enumeration is incomplete. |
| */ |
| static int rio_enum_complete(struct rio_mport *port) |
| { |
| u32 regval; |
| |
| rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR, |
| ®val); |
| return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0; |
| } |
| |
| /** |
| * rio_disc_peer- Recursively discovers a RIO network through a master port |
| * @net: RIO network being discovered |
| * @port: Master port to send transactions |
| * @destid: Current destination ID in network |
| * @hopcount: Number of hops into the network |
| * @prev: previous rio_dev |
| * @prev_port: previous port number |
| * |
| * Recursively discovers a RIO network. Transactions are sent via the |
| * master port passed in @port. |
| */ |
| static int |
| rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, |
| u8 hopcount, struct rio_dev *prev, int prev_port) |
| { |
| u8 port_num, route_port; |
| struct rio_dev *rdev; |
| u16 ndestid; |
| |
| /* Setup new RIO device */ |
| if ((rdev = rio_setup_device(net, port, destid, hopcount, 0))) { |
| rdev->prev = prev; |
| if (prev && rio_is_switch(prev)) |
| prev->rswitch->nextdev[prev_port] = rdev; |
| } else |
| return -1; |
| |
| if (rio_is_switch(rdev)) { |
| /* Associated destid is how we accessed this switch */ |
| rdev->destid = destid; |
| |
| pr_debug( |
| "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n", |
| rio_name(rdev), rdev->vid, rdev->did, |
| RIO_GET_TOTAL_PORTS(rdev->swpinfo)); |
| for (port_num = 0; |
| port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo); |
| port_num++) { |
| if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num) |
| continue; |
| |
| if (rio_sport_is_active |
| (port, destid, hopcount, port_num)) { |
| pr_debug( |
| "RIO: scanning device on port %d\n", |
| port_num); |
| |
| rio_lock_device(port, destid, hopcount, 1000); |
| |
| for (ndestid = 0; |
| ndestid < RIO_ANY_DESTID(port->sys_size); |
| ndestid++) { |
| rio_route_get_entry(rdev, |
| RIO_GLOBAL_TABLE, |
| ndestid, |
| &route_port, 0); |
| if (route_port == port_num) |
| break; |
| } |
| |
| if (ndestid == RIO_ANY_DESTID(port->sys_size)) |
| continue; |
| rio_unlock_device(port, destid, hopcount); |
| if (rio_disc_peer(net, port, ndestid, |
| hopcount + 1, rdev, port_num) < 0) |
| return -1; |
| } |
| } |
| } else |
| pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n", |
| rio_name(rdev), rdev->vid, rdev->did); |
| |
| return 0; |
| } |
| |
| /** |
| * rio_mport_is_active- Tests if master port link is active |
| * @port: Master port to test |
| * |
| * Reads the port error status CSR for the master port to |
| * determine if the port has an active link. Returns |
| * %RIO_PORT_N_ERR_STS_PORT_OK if the master port is active |
| * or %0 if it is inactive. |
| */ |
| static int rio_mport_is_active(struct rio_mport *port) |
| { |
| u32 result = 0; |
| u32 ext_ftr_ptr; |
| int *entry = rio_mport_phys_table; |
| |
| do { |
| if ((ext_ftr_ptr = |
| rio_mport_get_feature(port, 1, 0, 0, *entry))) |
| break; |
| } while (*++entry >= 0); |
| |
| if (ext_ftr_ptr) |
| rio_local_read_config_32(port, |
| ext_ftr_ptr + |
| RIO_PORT_N_ERR_STS_CSR(port->index), |
| &result); |
| |
| return result & RIO_PORT_N_ERR_STS_PORT_OK; |
| } |
| |
| static void rio_scan_release_net(struct rio_net *net) |
| { |
| pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id); |
| kfree(net->enum_data); |
| } |
| |
| static void rio_scan_release_dev(struct device *dev) |
| { |
| struct rio_net *net; |
| |
| net = to_rio_net(dev); |
| pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id); |
| kfree(net); |
| } |
| |
| /* |
| * rio_scan_alloc_net - Allocate and configure a new RIO network |
| * @mport: Master port associated with the RIO network |
| * @do_enum: Enumeration/Discovery mode flag |
| * @start: logical minimal start id for new net |
| * |
| * Allocates a new RIO network structure and initializes enumerator-specific |
| * part of it (if required). |
| * Returns a RIO network pointer on success or %NULL on failure. |
| */ |
| static struct rio_net *rio_scan_alloc_net(struct rio_mport *mport, |
| int do_enum, u16 start) |
| { |
| struct rio_net *net; |
| |
| net = rio_alloc_net(mport); |
| |
| if (net && do_enum) { |
| struct rio_id_table *idtab; |
| size_t size; |
| |
| size = sizeof(struct rio_id_table) + |
| BITS_TO_LONGS( |
| RIO_MAX_ROUTE_ENTRIES(mport->sys_size) |
| ) * sizeof(long); |
| |
| idtab = kzalloc(size, GFP_KERNEL); |
| |
| if (idtab == NULL) { |
| pr_err("RIO: failed to allocate destID table\n"); |
| rio_free_net(net); |
| net = NULL; |
| } else { |
| net->enum_data = idtab; |
| net->release = rio_scan_release_net; |
| idtab->start = start; |
| idtab->max = RIO_MAX_ROUTE_ENTRIES(mport->sys_size); |
| spin_lock_init(&idtab->lock); |
| } |
| } |
| |
| if (net) { |
| net->id = mport->id; |
| net->hport = mport; |
| dev_set_name(&net->dev, "rnet_%d", net->id); |
| net->dev.parent = &mport->dev; |
| net->dev.release = rio_scan_release_dev; |
| rio_add_net(net); |
| } |
| |
| return net; |
| } |
| |
| /** |
| * rio_update_route_tables- Updates route tables in switches |
| * @net: RIO network to run update on |
| * |
| * For each enumerated device, ensure that each switch in a system |
| * has correct routing entries. Add routes for devices that where |
| * unknown dirung the first enumeration pass through the switch. |
| */ |
| static void rio_update_route_tables(struct rio_net *net) |
| { |
| struct rio_dev *rdev, *swrdev; |
| struct rio_switch *rswitch; |
| u8 sport; |
| u16 destid; |
| |
| list_for_each_entry(rdev, &net->devices, net_list) { |
| |
| destid = rdev->destid; |
| |
| list_for_each_entry(rswitch, &net->switches, node) { |
| |
| if (rio_is_switch(rdev) && (rdev->rswitch == rswitch)) |
| continue; |
| |
| if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) { |
| swrdev = sw_to_rio_dev(rswitch); |
| |
| /* Skip if destid ends in empty switch*/ |
| if (swrdev->destid == destid) |
| continue; |
| |
| sport = RIO_GET_PORT_NUM(swrdev->swpinfo); |
| |
| rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE, |
| destid, sport, 0); |
| rswitch->route_table[destid] = sport; |
| } |
| } |
| } |
| } |
| |
| /** |
| * rio_init_em - Initializes RIO Error Management (for switches) |
| * @rdev: RIO device |
| * |
| * For each enumerated switch, call device-specific error management |
| * initialization routine (if supplied by the switch driver). |
| */ |
| static void rio_init_em(struct rio_dev *rdev) |
| { |
| if (rio_is_switch(rdev) && (rdev->em_efptr) && |
| rdev->rswitch->ops && rdev->rswitch->ops->em_init) { |
| rdev->rswitch->ops->em_init(rdev); |
| } |
| } |
| |
| /** |
| * rio_pw_enable - Enables/disables port-write handling by a master port |
| * @port: Master port associated with port-write handling |
| * @enable: 1=enable, 0=disable |
| */ |
| static void rio_pw_enable(struct rio_mport *port, int enable) |
| { |
| if (port->ops->pwenable) |
| port->ops->pwenable(port, enable); |
| } |
| |
| /** |
| * rio_enum_mport- Start enumeration through a master port |
| * @mport: Master port to send transactions |
| * @flags: Enumeration control flags |
| * |
| * Starts the enumeration process. If somebody has enumerated our |
| * master port device, then give up. If not and we have an active |
| * link, then start recursive peer enumeration. Returns %0 if |
| * enumeration succeeds or %-EBUSY if enumeration fails. |
| */ |
| static int rio_enum_mport(struct rio_mport *mport, u32 flags) |
| { |
| struct rio_net *net = NULL; |
| int rc = 0; |
| |
| printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id, |
| mport->name); |
| |
| /* |
| * To avoid multiple start requests (repeat enumeration is not supported |
| * by this method) check if enumeration/discovery was performed for this |
| * mport: if mport was added into the list of mports for a net exit |
| * with error. |
| */ |
| if (mport->nnode.next || mport->nnode.prev) |
| return -EBUSY; |
| |
| /* If somebody else enumerated our master port device, bail. */ |
| if (rio_enum_host(mport) < 0) { |
| printk(KERN_INFO |
| "RIO: master port %d device has been enumerated by a remote host\n", |
| mport->id); |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| /* If master port has an active link, allocate net and enum peers */ |
| if (rio_mport_is_active(mport)) { |
| net = rio_scan_alloc_net(mport, 1, 0); |
| if (!net) { |
| printk(KERN_ERR "RIO: failed to allocate new net\n"); |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| /* reserve mport destID in new net */ |
| rio_destid_reserve(net, mport->host_deviceid); |
| |
| /* Enable Input Output Port (transmitter reviever) */ |
| rio_enable_rx_tx_port(mport, 1, 0, 0, 0); |
| |
| /* Set component tag for host */ |
| rio_local_write_config_32(mport, RIO_COMPONENT_TAG_CSR, |
| next_comptag++); |
| |
| next_destid = rio_destid_alloc(net); |
| |
| if (rio_enum_peer(net, mport, 0, NULL, 0) < 0) { |
| /* A higher priority host won enumeration, bail. */ |
| printk(KERN_INFO |
| "RIO: master port %d device has lost enumeration to a remote host\n", |
| mport->id); |
| rio_clear_locks(net); |
| rc = -EBUSY; |
| goto out; |
| } |
| /* free the last allocated destID (unused) */ |
| rio_destid_free(net, next_destid); |
| rio_update_route_tables(net); |
| rio_clear_locks(net); |
| rio_pw_enable(mport, 1); |
| } else { |
| printk(KERN_INFO "RIO: master port %d link inactive\n", |
| mport->id); |
| rc = -EINVAL; |
| } |
| |
| out: |
| return rc; |
| } |
| |
| /** |
| * rio_build_route_tables- Generate route tables from switch route entries |
| * @net: RIO network to run route tables scan on |
| * |
| * For each switch device, generate a route table by copying existing |
| * route entries from the switch. |
| */ |
| static void rio_build_route_tables(struct rio_net *net) |
| { |
| struct rio_switch *rswitch; |
| struct rio_dev *rdev; |
| int i; |
| u8 sport; |
| |
| list_for_each_entry(rswitch, &net->switches, node) { |
| rdev = sw_to_rio_dev(rswitch); |
| |
| rio_lock_device(net->hport, rdev->destid, |
| rdev->hopcount, 1000); |
| for (i = 0; |
| i < RIO_MAX_ROUTE_ENTRIES(net->hport->sys_size); |
| i++) { |
| if (rio_route_get_entry(rdev, RIO_GLOBAL_TABLE, |
| i, &sport, 0) < 0) |
| continue; |
| rswitch->route_table[i] = sport; |
| } |
| |
| rio_unlock_device(net->hport, rdev->destid, rdev->hopcount); |
| } |
| } |
| |
| /** |
| * rio_disc_mport- Start discovery through a master port |
| * @mport: Master port to send transactions |
| * @flags: discovery control flags |
| * |
| * Starts the discovery process. If we have an active link, |
| * then wait for the signal that enumeration is complete (if wait |
| * is allowed). |
| * When enumeration completion is signaled, start recursive |
| * peer discovery. Returns %0 if discovery succeeds or %-EBUSY |
| * on failure. |
| */ |
| static int rio_disc_mport(struct rio_mport *mport, u32 flags) |
| { |
| struct rio_net *net = NULL; |
| unsigned long to_end; |
| |
| printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id, |
| mport->name); |
| |
| /* If master port has an active link, allocate net and discover peers */ |
| if (rio_mport_is_active(mport)) { |
| if (rio_enum_complete(mport)) |
| goto enum_done; |
| else if (flags & RIO_SCAN_ENUM_NO_WAIT) |
| return -EAGAIN; |
| |
| pr_debug("RIO: wait for enumeration to complete...\n"); |
| |
| to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ; |
| while (time_before(jiffies, to_end)) { |
| if (rio_enum_complete(mport)) |
| goto enum_done; |
| msleep(10); |
| } |
| |
| pr_debug("RIO: discovery timeout on mport %d %s\n", |
| mport->id, mport->name); |
| goto bail; |
| enum_done: |
| pr_debug("RIO: ... enumeration done\n"); |
| |
| net = rio_scan_alloc_net(mport, 0, 0); |
| if (!net) { |
| printk(KERN_ERR "RIO: Failed to allocate new net\n"); |
| goto bail; |
| } |
| |
| /* Read DestID assigned by enumerator */ |
| rio_local_read_config_32(mport, RIO_DID_CSR, |
| &mport->host_deviceid); |
| mport->host_deviceid = RIO_GET_DID(mport->sys_size, |
| mport->host_deviceid); |
| |
| if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size), |
| 0, NULL, 0) < 0) { |
| printk(KERN_INFO |
| "RIO: master port %d device has failed discovery\n", |
| mport->id); |
| goto bail; |
| } |
| |
| rio_build_route_tables(net); |
| } |
| |
| return 0; |
| bail: |
| return -EBUSY; |
| } |
| |
| static struct rio_scan rio_scan_ops = { |
| .owner = THIS_MODULE, |
| .enumerate = rio_enum_mport, |
| .discover = rio_disc_mport, |
| }; |
| |
| static bool scan; |
| module_param(scan, bool, 0); |
| MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery " |
| "(default = 0)"); |
| |
| /** |
| * rio_basic_attach: |
| * |
| * When this enumeration/discovery method is loaded as a module this function |
| * registers its specific enumeration and discover routines for all available |
| * RapidIO mport devices. The "scan" command line parameter controls ability of |
| * the module to start RapidIO enumeration/discovery automatically. |
| * |
| * Returns 0 for success or -EIO if unable to register itself. |
| * |
| * This enumeration/discovery method cannot be unloaded and therefore does not |
| * provide a matching cleanup_module routine. |
| */ |
| |
| static int __init rio_basic_attach(void) |
| { |
| if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops)) |
| return -EIO; |
| if (scan) |
| rio_init_mports(); |
| return 0; |
| } |
| |
| late_initcall(rio_basic_attach); |
| |
| MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery"); |
| MODULE_LICENSE("GPL"); |