| /* |
| * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> |
| */ |
| #ifndef _ASM_POWERPC_SYSTEM_H |
| #define _ASM_POWERPC_SYSTEM_H |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| |
| #include <asm/hw_irq.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/atomic.h> |
| |
| /* |
| * Memory barrier. |
| * The sync instruction guarantees that all memory accesses initiated |
| * by this processor have been performed (with respect to all other |
| * mechanisms that access memory). The eieio instruction is a barrier |
| * providing an ordering (separately) for (a) cacheable stores and (b) |
| * loads and stores to non-cacheable memory (e.g. I/O devices). |
| * |
| * mb() prevents loads and stores being reordered across this point. |
| * rmb() prevents loads being reordered across this point. |
| * wmb() prevents stores being reordered across this point. |
| * read_barrier_depends() prevents data-dependent loads being reordered |
| * across this point (nop on PPC). |
| * |
| * We have to use the sync instructions for mb(), since lwsync doesn't |
| * order loads with respect to previous stores. Lwsync is fine for |
| * rmb(), though. Note that lwsync is interpreted as sync by |
| * 32-bit and older 64-bit CPUs. |
| * |
| * For wmb(), we use sync since wmb is used in drivers to order |
| * stores to system memory with respect to writes to the device. |
| * However, smp_wmb() can be a lighter-weight eieio barrier on |
| * SMP since it is only used to order updates to system memory. |
| */ |
| #define mb() __asm__ __volatile__ ("sync" : : : "memory") |
| #define rmb() __asm__ __volatile__ ("lwsync" : : : "memory") |
| #define wmb() __asm__ __volatile__ ("sync" : : : "memory") |
| #define read_barrier_depends() do { } while(0) |
| |
| #define set_mb(var, value) do { var = value; mb(); } while (0) |
| #define set_wmb(var, value) do { var = value; wmb(); } while (0) |
| |
| #ifdef CONFIG_SMP |
| #define smp_mb() mb() |
| #define smp_rmb() rmb() |
| #define smp_wmb() __asm__ __volatile__ ("eieio" : : : "memory") |
| #define smp_read_barrier_depends() read_barrier_depends() |
| #else |
| #define smp_mb() barrier() |
| #define smp_rmb() barrier() |
| #define smp_wmb() barrier() |
| #define smp_read_barrier_depends() do { } while(0) |
| #endif /* CONFIG_SMP */ |
| |
| #ifdef __KERNEL__ |
| struct task_struct; |
| struct pt_regs; |
| |
| #ifdef CONFIG_DEBUGGER |
| |
| extern int (*__debugger)(struct pt_regs *regs); |
| extern int (*__debugger_ipi)(struct pt_regs *regs); |
| extern int (*__debugger_bpt)(struct pt_regs *regs); |
| extern int (*__debugger_sstep)(struct pt_regs *regs); |
| extern int (*__debugger_iabr_match)(struct pt_regs *regs); |
| extern int (*__debugger_dabr_match)(struct pt_regs *regs); |
| extern int (*__debugger_fault_handler)(struct pt_regs *regs); |
| |
| #define DEBUGGER_BOILERPLATE(__NAME) \ |
| static inline int __NAME(struct pt_regs *regs) \ |
| { \ |
| if (unlikely(__ ## __NAME)) \ |
| return __ ## __NAME(regs); \ |
| return 0; \ |
| } |
| |
| DEBUGGER_BOILERPLATE(debugger) |
| DEBUGGER_BOILERPLATE(debugger_ipi) |
| DEBUGGER_BOILERPLATE(debugger_bpt) |
| DEBUGGER_BOILERPLATE(debugger_sstep) |
| DEBUGGER_BOILERPLATE(debugger_iabr_match) |
| DEBUGGER_BOILERPLATE(debugger_dabr_match) |
| DEBUGGER_BOILERPLATE(debugger_fault_handler) |
| |
| #ifdef CONFIG_XMON |
| extern void xmon_init(int enable); |
| #endif |
| |
| #else |
| static inline int debugger(struct pt_regs *regs) { return 0; } |
| static inline int debugger_ipi(struct pt_regs *regs) { return 0; } |
| static inline int debugger_bpt(struct pt_regs *regs) { return 0; } |
| static inline int debugger_sstep(struct pt_regs *regs) { return 0; } |
| static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; } |
| static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; } |
| static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } |
| #endif |
| |
| extern int set_dabr(unsigned long dabr); |
| extern void print_backtrace(unsigned long *); |
| extern void show_regs(struct pt_regs * regs); |
| extern void flush_instruction_cache(void); |
| extern void hard_reset_now(void); |
| extern void poweroff_now(void); |
| |
| #ifdef CONFIG_6xx |
| extern long _get_L2CR(void); |
| extern long _get_L3CR(void); |
| extern void _set_L2CR(unsigned long); |
| extern void _set_L3CR(unsigned long); |
| #else |
| #define _get_L2CR() 0L |
| #define _get_L3CR() 0L |
| #define _set_L2CR(val) do { } while(0) |
| #define _set_L3CR(val) do { } while(0) |
| #endif |
| |
| extern void via_cuda_init(void); |
| extern void read_rtc_time(void); |
| extern void pmac_find_display(void); |
| extern void giveup_fpu(struct task_struct *); |
| extern void disable_kernel_fp(void); |
| extern void enable_kernel_fp(void); |
| extern void flush_fp_to_thread(struct task_struct *); |
| extern void enable_kernel_altivec(void); |
| extern void giveup_altivec(struct task_struct *); |
| extern void load_up_altivec(struct task_struct *); |
| extern int emulate_altivec(struct pt_regs *); |
| extern void giveup_spe(struct task_struct *); |
| extern void load_up_spe(struct task_struct *); |
| extern int fix_alignment(struct pt_regs *); |
| extern void cvt_fd(float *from, double *to, struct thread_struct *thread); |
| extern void cvt_df(double *from, float *to, struct thread_struct *thread); |
| |
| #ifdef CONFIG_ALTIVEC |
| extern void flush_altivec_to_thread(struct task_struct *); |
| #else |
| static inline void flush_altivec_to_thread(struct task_struct *t) |
| { |
| } |
| #endif |
| |
| #ifdef CONFIG_SPE |
| extern void flush_spe_to_thread(struct task_struct *); |
| #else |
| static inline void flush_spe_to_thread(struct task_struct *t) |
| { |
| } |
| #endif |
| |
| extern int call_rtas(const char *, int, int, unsigned long *, ...); |
| extern void cacheable_memzero(void *p, unsigned int nb); |
| extern void *cacheable_memcpy(void *, const void *, unsigned int); |
| extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); |
| extern void bad_page_fault(struct pt_regs *, unsigned long, int); |
| extern int die(const char *, struct pt_regs *, long); |
| extern void _exception(int, struct pt_regs *, int, unsigned long); |
| #ifdef CONFIG_BOOKE_WDT |
| extern u32 booke_wdt_enabled; |
| extern u32 booke_wdt_period; |
| #endif /* CONFIG_BOOKE_WDT */ |
| |
| /* EBCDIC -> ASCII conversion for [0-9A-Z] on iSeries */ |
| extern unsigned char e2a(unsigned char); |
| |
| struct device_node; |
| extern void note_scsi_host(struct device_node *, void *); |
| |
| extern struct task_struct *__switch_to(struct task_struct *, |
| struct task_struct *); |
| #define switch_to(prev, next, last) ((last) = __switch_to((prev), (next))) |
| |
| struct thread_struct; |
| extern struct task_struct *_switch(struct thread_struct *prev, |
| struct thread_struct *next); |
| |
| extern unsigned int rtas_data; |
| extern int mem_init_done; /* set on boot once kmalloc can be called */ |
| extern unsigned long memory_limit; |
| |
| extern int powersave_nap; /* set if nap mode can be used in idle loop */ |
| |
| /* |
| * Atomic exchange |
| * |
| * Changes the memory location '*ptr' to be val and returns |
| * the previous value stored there. |
| */ |
| static __inline__ unsigned long |
| __xchg_u32(volatile void *p, unsigned long val) |
| { |
| unsigned long prev; |
| |
| __asm__ __volatile__( |
| EIEIO_ON_SMP |
| "1: lwarx %0,0,%2 \n" |
| PPC405_ERR77(0,%2) |
| " stwcx. %3,0,%2 \n\ |
| bne- 1b" |
| ISYNC_ON_SMP |
| : "=&r" (prev), "=m" (*(volatile unsigned int *)p) |
| : "r" (p), "r" (val), "m" (*(volatile unsigned int *)p) |
| : "cc", "memory"); |
| |
| return prev; |
| } |
| |
| #ifdef CONFIG_PPC64 |
| static __inline__ unsigned long |
| __xchg_u64(volatile void *p, unsigned long val) |
| { |
| unsigned long prev; |
| |
| __asm__ __volatile__( |
| EIEIO_ON_SMP |
| "1: ldarx %0,0,%2 \n" |
| PPC405_ERR77(0,%2) |
| " stdcx. %3,0,%2 \n\ |
| bne- 1b" |
| ISYNC_ON_SMP |
| : "=&r" (prev), "=m" (*(volatile unsigned long *)p) |
| : "r" (p), "r" (val), "m" (*(volatile unsigned long *)p) |
| : "cc", "memory"); |
| |
| return prev; |
| } |
| #endif |
| |
| /* |
| * This function doesn't exist, so you'll get a linker error |
| * if something tries to do an invalid xchg(). |
| */ |
| extern void __xchg_called_with_bad_pointer(void); |
| |
| static __inline__ unsigned long |
| __xchg(volatile void *ptr, unsigned long x, unsigned int size) |
| { |
| switch (size) { |
| case 4: |
| return __xchg_u32(ptr, x); |
| #ifdef CONFIG_PPC64 |
| case 8: |
| return __xchg_u64(ptr, x); |
| #endif |
| } |
| __xchg_called_with_bad_pointer(); |
| return x; |
| } |
| |
| #define xchg(ptr,x) \ |
| ({ \ |
| __typeof__(*(ptr)) _x_ = (x); \ |
| (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \ |
| }) |
| |
| #define tas(ptr) (xchg((ptr),1)) |
| |
| /* |
| * Compare and exchange - if *p == old, set it to new, |
| * and return the old value of *p. |
| */ |
| #define __HAVE_ARCH_CMPXCHG 1 |
| |
| static __inline__ unsigned long |
| __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) |
| { |
| unsigned int prev; |
| |
| __asm__ __volatile__ ( |
| EIEIO_ON_SMP |
| "1: lwarx %0,0,%2 # __cmpxchg_u32\n\ |
| cmpw 0,%0,%3\n\ |
| bne- 2f\n" |
| PPC405_ERR77(0,%2) |
| " stwcx. %4,0,%2\n\ |
| bne- 1b" |
| ISYNC_ON_SMP |
| "\n\ |
| 2:" |
| : "=&r" (prev), "=m" (*p) |
| : "r" (p), "r" (old), "r" (new), "m" (*p) |
| : "cc", "memory"); |
| |
| return prev; |
| } |
| |
| #ifdef CONFIG_PPC64 |
| static __inline__ unsigned long |
| __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) |
| { |
| unsigned long prev; |
| |
| __asm__ __volatile__ ( |
| EIEIO_ON_SMP |
| "1: ldarx %0,0,%2 # __cmpxchg_u64\n\ |
| cmpd 0,%0,%3\n\ |
| bne- 2f\n\ |
| stdcx. %4,0,%2\n\ |
| bne- 1b" |
| ISYNC_ON_SMP |
| "\n\ |
| 2:" |
| : "=&r" (prev), "=m" (*p) |
| : "r" (p), "r" (old), "r" (new), "m" (*p) |
| : "cc", "memory"); |
| |
| return prev; |
| } |
| #endif |
| |
| /* This function doesn't exist, so you'll get a linker error |
| if something tries to do an invalid cmpxchg(). */ |
| extern void __cmpxchg_called_with_bad_pointer(void); |
| |
| static __inline__ unsigned long |
| __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, |
| unsigned int size) |
| { |
| switch (size) { |
| case 4: |
| return __cmpxchg_u32(ptr, old, new); |
| #ifdef CONFIG_PPC64 |
| case 8: |
| return __cmpxchg_u64(ptr, old, new); |
| #endif |
| } |
| __cmpxchg_called_with_bad_pointer(); |
| return old; |
| } |
| |
| #define cmpxchg(ptr,o,n) \ |
| ({ \ |
| __typeof__(*(ptr)) _o_ = (o); \ |
| __typeof__(*(ptr)) _n_ = (n); \ |
| (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ |
| (unsigned long)_n_, sizeof(*(ptr))); \ |
| }) |
| |
| #ifdef CONFIG_PPC64 |
| /* |
| * We handle most unaligned accesses in hardware. On the other hand |
| * unaligned DMA can be very expensive on some ppc64 IO chips (it does |
| * powers of 2 writes until it reaches sufficient alignment). |
| * |
| * Based on this we disable the IP header alignment in network drivers. |
| */ |
| #define NET_IP_ALIGN 0 |
| #endif |
| |
| #define arch_align_stack(x) (x) |
| |
| /* Used in very early kernel initialization. */ |
| extern unsigned long reloc_offset(void); |
| extern unsigned long add_reloc_offset(unsigned long); |
| extern void reloc_got2(unsigned long); |
| |
| #define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) |
| |
| static inline void create_instruction(unsigned long addr, unsigned int instr) |
| { |
| unsigned int *p; |
| p = (unsigned int *)addr; |
| *p = instr; |
| asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (p)); |
| } |
| |
| /* Flags for create_branch: |
| * "b" == create_branch(addr, target, 0); |
| * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); |
| * "bl" == create_branch(addr, target, BRANCH_SET_LINK); |
| * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); |
| */ |
| #define BRANCH_SET_LINK 0x1 |
| #define BRANCH_ABSOLUTE 0x2 |
| |
| static inline void create_branch(unsigned long addr, |
| unsigned long target, int flags) |
| { |
| unsigned int instruction; |
| |
| if (! (flags & BRANCH_ABSOLUTE)) |
| target = target - addr; |
| |
| /* Mask out the flags and target, so they don't step on each other. */ |
| instruction = 0x48000000 | (flags & 0x3) | (target & 0x03FFFFFC); |
| |
| create_instruction(addr, instruction); |
| } |
| |
| static inline void create_function_call(unsigned long addr, void * func) |
| { |
| unsigned long func_addr; |
| |
| #ifdef CONFIG_PPC64 |
| /* |
| * On PPC64 the function pointer actually points to the function's |
| * descriptor. The first entry in the descriptor is the address |
| * of the function text. |
| */ |
| func_addr = *(unsigned long *)func; |
| #else |
| func_addr = (unsigned long)func; |
| #endif |
| create_branch(addr, func_addr, BRANCH_SET_LINK); |
| } |
| |
| #endif /* __KERNEL__ */ |
| #endif /* _ASM_POWERPC_SYSTEM_H */ |