| menuconfig RT2X00 |
| bool "Ralink driver support" |
| depends on MAC80211 && WLAN_80211 && EXPERIMENTAL |
| ---help--- |
| This will enable the experimental support for the Ralink drivers, |
| developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. |
| |
| These drivers make use of the mac80211 stack. |
| |
| When building one of the individual drivers, the rt2x00 library |
| will also be created. That library (when the driver is built as |
| a module) will be called "rt2x00lib.ko". |
| |
| Additionally PCI and USB libraries will also be build depending |
| on the types of drivers being selected, these libraries will be |
| called "rt2x00pci.ko" and "rt2x00usb.ko". |
| |
| if RT2X00 |
| |
| config RT2400PCI |
| tristate "Ralink rt2400 (PCI/PCMCIA) support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select EEPROM_93CX6 |
| ---help--- |
| This adds support for rt2400 wireless chipset family. |
| Supported chips: RT2460. |
| |
| When compiled as a module, this driver will be called "rt2400pci.ko". |
| |
| config RT2500PCI |
| tristate "Ralink rt2500 (PCI/PCMCIA) support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select EEPROM_93CX6 |
| ---help--- |
| This adds support for rt2500 wireless chipset family. |
| Supported chips: RT2560. |
| |
| When compiled as a module, this driver will be called "rt2500pci.ko". |
| |
| config RT61PCI |
| tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select RT2X00_LIB_FIRMWARE |
| select RT2X00_LIB_CRYPTO |
| select CRC_ITU_T |
| select EEPROM_93CX6 |
| ---help--- |
| This adds support for rt2501 wireless chipset family. |
| Supported chips: RT2561, RT2561S & RT2661. |
| |
| When compiled as a module, this driver will be called "rt61pci.ko". |
| |
| config RT2500USB |
| tristate "Ralink rt2500 (USB) support" |
| depends on USB |
| select RT2X00_LIB_USB |
| ---help--- |
| This adds support for rt2500 wireless chipset family. |
| Supported chips: RT2571 & RT2572. |
| |
| When compiled as a module, this driver will be called "rt2500usb.ko". |
| |
| config RT73USB |
| tristate "Ralink rt2501/rt73 (USB) support" |
| depends on USB |
| select RT2X00_LIB_USB |
| select RT2X00_LIB_FIRMWARE |
| select RT2X00_LIB_CRYPTO |
| select CRC_ITU_T |
| ---help--- |
| This adds support for rt2501 wireless chipset family. |
| Supported chips: RT2571W, RT2573 & RT2671. |
| |
| When compiled as a module, this driver will be called "rt73usb.ko". |
| |
| config RT2X00_LIB_PCI |
| tristate |
| select RT2X00_LIB |
| |
| config RT2X00_LIB_USB |
| tristate |
| select RT2X00_LIB |
| |
| config RT2X00_LIB |
| tristate |
| |
| config RT2X00_LIB_FIRMWARE |
| boolean |
| select FW_LOADER |
| |
| config RT2X00_LIB_CRYPTO |
| boolean |
| |
| config RT2X00_LIB_RFKILL |
| boolean |
| default y if (RT2X00_LIB=y && RFKILL=y) || (RT2X00_LIB=m && RFKILL!=n) |
| |
| comment "rt2x00 rfkill support disabled due to modularized RFKILL and built-in rt2x00" |
| depends on RT2X00_LIB=y && RFKILL=m |
| |
| config RT2X00_LIB_LEDS |
| boolean |
| default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) |
| |
| comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00" |
| depends on RT2X00_LIB=y && LEDS_CLASS=m |
| |
| config RT2X00_LIB_DEBUGFS |
| bool "Ralink debugfs support" |
| depends on RT2X00_LIB && MAC80211_DEBUGFS |
| ---help--- |
| Enable creation of debugfs files for the rt2x00 drivers. |
| These debugfs files support both reading and writing of the |
| most important register types of the rt2x00 hardware. |
| |
| config RT2X00_DEBUG |
| bool "Ralink debug output" |
| depends on RT2X00_LIB |
| ---help--- |
| Enable debugging output for all rt2x00 modules |
| |
| endif |