| /* |
| * linux/arch/alpha/kernel/osf_sys.c |
| * |
| * Copyright (C) 1995 Linus Torvalds |
| */ |
| |
| /* |
| * This file handles some of the stranger OSF/1 system call interfaces. |
| * Some of the system calls expect a non-C calling standard, others have |
| * special parameter blocks.. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/stddef.h> |
| #include <linux/syscalls.h> |
| #include <linux/unistd.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/user.h> |
| #include <linux/a.out.h> |
| #include <linux/utsname.h> |
| #include <linux/time.h> |
| #include <linux/timex.h> |
| #include <linux/major.h> |
| #include <linux/stat.h> |
| #include <linux/mman.h> |
| #include <linux/shm.h> |
| #include <linux/poll.h> |
| #include <linux/file.h> |
| #include <linux/types.h> |
| #include <linux/ipc.h> |
| #include <linux/namei.h> |
| #include <linux/uio.h> |
| #include <linux/vfs.h> |
| #include <linux/rcupdate.h> |
| |
| #include <asm/fpu.h> |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| #include <asm/sysinfo.h> |
| #include <asm/hwrpb.h> |
| #include <asm/processor.h> |
| |
| extern int do_pipe(int *); |
| |
| /* |
| * Brk needs to return an error. Still support Linux's brk(0) query idiom, |
| * which OSF programs just shouldn't be doing. We're still not quite |
| * identical to OSF as we don't return 0 on success, but doing otherwise |
| * would require changes to libc. Hopefully this is good enough. |
| */ |
| asmlinkage unsigned long |
| osf_brk(unsigned long brk) |
| { |
| unsigned long retval = sys_brk(brk); |
| if (brk && brk != retval) |
| retval = -ENOMEM; |
| return retval; |
| } |
| |
| /* |
| * This is pure guess-work.. |
| */ |
| asmlinkage int |
| osf_set_program_attributes(unsigned long text_start, unsigned long text_len, |
| unsigned long bss_start, unsigned long bss_len) |
| { |
| struct mm_struct *mm; |
| |
| lock_kernel(); |
| mm = current->mm; |
| mm->end_code = bss_start + bss_len; |
| mm->brk = bss_start + bss_len; |
| #if 0 |
| printk("set_program_attributes(%lx %lx %lx %lx)\n", |
| text_start, text_len, bss_start, bss_len); |
| #endif |
| unlock_kernel(); |
| return 0; |
| } |
| |
| /* |
| * OSF/1 directory handling functions... |
| * |
| * The "getdents()" interface is much more sane: the "basep" stuff is |
| * braindamage (it can't really handle filesystems where the directory |
| * offset differences aren't the same as "d_reclen"). |
| */ |
| #define NAME_OFFSET offsetof (struct osf_dirent, d_name) |
| #define ROUND_UP(x) (((x)+3) & ~3) |
| |
| struct osf_dirent { |
| unsigned int d_ino; |
| unsigned short d_reclen; |
| unsigned short d_namlen; |
| char d_name[1]; |
| }; |
| |
| struct osf_dirent_callback { |
| struct osf_dirent __user *dirent; |
| long __user *basep; |
| unsigned int count; |
| int error; |
| }; |
| |
| static int |
| osf_filldir(void *__buf, const char *name, int namlen, loff_t offset, |
| ino_t ino, unsigned int d_type) |
| { |
| struct osf_dirent __user *dirent; |
| struct osf_dirent_callback *buf = (struct osf_dirent_callback *) __buf; |
| unsigned int reclen = ROUND_UP(NAME_OFFSET + namlen + 1); |
| |
| buf->error = -EINVAL; /* only used if we fail */ |
| if (reclen > buf->count) |
| return -EINVAL; |
| if (buf->basep) { |
| if (put_user(offset, buf->basep)) |
| return -EFAULT; |
| buf->basep = NULL; |
| } |
| dirent = buf->dirent; |
| put_user(ino, &dirent->d_ino); |
| put_user(namlen, &dirent->d_namlen); |
| put_user(reclen, &dirent->d_reclen); |
| if (copy_to_user(dirent->d_name, name, namlen) || |
| put_user(0, dirent->d_name + namlen)) |
| return -EFAULT; |
| dirent = (void __user *)dirent + reclen; |
| buf->dirent = dirent; |
| buf->count -= reclen; |
| return 0; |
| } |
| |
| asmlinkage int |
| osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent, |
| unsigned int count, long __user *basep) |
| { |
| int error; |
| struct file *file; |
| struct osf_dirent_callback buf; |
| |
| error = -EBADF; |
| file = fget(fd); |
| if (!file) |
| goto out; |
| |
| buf.dirent = dirent; |
| buf.basep = basep; |
| buf.count = count; |
| buf.error = 0; |
| |
| error = vfs_readdir(file, osf_filldir, &buf); |
| if (error < 0) |
| goto out_putf; |
| |
| error = buf.error; |
| if (count != buf.count) |
| error = count - buf.count; |
| |
| out_putf: |
| fput(file); |
| out: |
| return error; |
| } |
| |
| #undef ROUND_UP |
| #undef NAME_OFFSET |
| |
| asmlinkage unsigned long |
| osf_mmap(unsigned long addr, unsigned long len, unsigned long prot, |
| unsigned long flags, unsigned long fd, unsigned long off) |
| { |
| struct file *file = NULL; |
| unsigned long ret = -EBADF; |
| |
| #if 0 |
| if (flags & (_MAP_HASSEMAPHORE | _MAP_INHERIT | _MAP_UNALIGNED)) |
| printk("%s: unimplemented OSF mmap flags %04lx\n", |
| current->comm, flags); |
| #endif |
| if (!(flags & MAP_ANONYMOUS)) { |
| file = fget(fd); |
| if (!file) |
| goto out; |
| } |
| flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); |
| down_write(¤t->mm->mmap_sem); |
| ret = do_mmap(file, addr, len, prot, flags, off); |
| up_write(¤t->mm->mmap_sem); |
| if (file) |
| fput(file); |
| out: |
| return ret; |
| } |
| |
| |
| /* |
| * The OSF/1 statfs structure is much larger, but this should |
| * match the beginning, at least. |
| */ |
| struct osf_statfs { |
| short f_type; |
| short f_flags; |
| int f_fsize; |
| int f_bsize; |
| int f_blocks; |
| int f_bfree; |
| int f_bavail; |
| int f_files; |
| int f_ffree; |
| __kernel_fsid_t f_fsid; |
| }; |
| |
| static int |
| linux_to_osf_statfs(struct kstatfs *linux_stat, struct osf_statfs __user *osf_stat, |
| unsigned long bufsiz) |
| { |
| struct osf_statfs tmp_stat; |
| |
| tmp_stat.f_type = linux_stat->f_type; |
| tmp_stat.f_flags = 0; /* mount flags */ |
| tmp_stat.f_fsize = linux_stat->f_frsize; |
| tmp_stat.f_bsize = linux_stat->f_bsize; |
| tmp_stat.f_blocks = linux_stat->f_blocks; |
| tmp_stat.f_bfree = linux_stat->f_bfree; |
| tmp_stat.f_bavail = linux_stat->f_bavail; |
| tmp_stat.f_files = linux_stat->f_files; |
| tmp_stat.f_ffree = linux_stat->f_ffree; |
| tmp_stat.f_fsid = linux_stat->f_fsid; |
| if (bufsiz > sizeof(tmp_stat)) |
| bufsiz = sizeof(tmp_stat); |
| return copy_to_user(osf_stat, &tmp_stat, bufsiz) ? -EFAULT : 0; |
| } |
| |
| static int |
| do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, |
| unsigned long bufsiz) |
| { |
| struct kstatfs linux_stat; |
| int error = vfs_statfs(dentry->d_inode->i_sb, &linux_stat); |
| if (!error) |
| error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz); |
| return error; |
| } |
| |
| asmlinkage int |
| osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz) |
| { |
| struct nameidata nd; |
| int retval; |
| |
| retval = user_path_walk(path, &nd); |
| if (!retval) { |
| retval = do_osf_statfs(nd.dentry, buffer, bufsiz); |
| path_release(&nd); |
| } |
| return retval; |
| } |
| |
| asmlinkage int |
| osf_fstatfs(unsigned long fd, struct osf_statfs __user *buffer, unsigned long bufsiz) |
| { |
| struct file *file; |
| int retval; |
| |
| retval = -EBADF; |
| file = fget(fd); |
| if (file) { |
| retval = do_osf_statfs(file->f_dentry, buffer, bufsiz); |
| fput(file); |
| } |
| return retval; |
| } |
| |
| /* |
| * Uhh.. OSF/1 mount parameters aren't exactly obvious.. |
| * |
| * Although to be frank, neither are the native Linux/i386 ones.. |
| */ |
| struct ufs_args { |
| char __user *devname; |
| int flags; |
| uid_t exroot; |
| }; |
| |
| struct cdfs_args { |
| char __user *devname; |
| int flags; |
| uid_t exroot; |
| |
| /* This has lots more here, which Linux handles with the option block |
| but I'm too lazy to do the translation into ASCII. */ |
| }; |
| |
| struct procfs_args { |
| char __user *devname; |
| int flags; |
| uid_t exroot; |
| }; |
| |
| /* |
| * We can't actually handle ufs yet, so we translate UFS mounts to |
| * ext2fs mounts. I wouldn't mind a UFS filesystem, but the UFS |
| * layout is so braindead it's a major headache doing it. |
| * |
| * Just how long ago was it written? OTOH our UFS driver may be still |
| * unhappy with OSF UFS. [CHECKME] |
| */ |
| static int |
| osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags) |
| { |
| int retval; |
| struct cdfs_args tmp; |
| char *devname; |
| |
| retval = -EFAULT; |
| if (copy_from_user(&tmp, args, sizeof(tmp))) |
| goto out; |
| devname = getname(tmp.devname); |
| retval = PTR_ERR(devname); |
| if (IS_ERR(devname)) |
| goto out; |
| retval = do_mount(devname, dirname, "ext2", flags, NULL); |
| putname(devname); |
| out: |
| return retval; |
| } |
| |
| static int |
| osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags) |
| { |
| int retval; |
| struct cdfs_args tmp; |
| char *devname; |
| |
| retval = -EFAULT; |
| if (copy_from_user(&tmp, args, sizeof(tmp))) |
| goto out; |
| devname = getname(tmp.devname); |
| retval = PTR_ERR(devname); |
| if (IS_ERR(devname)) |
| goto out; |
| retval = do_mount(devname, dirname, "iso9660", flags, NULL); |
| putname(devname); |
| out: |
| return retval; |
| } |
| |
| static int |
| osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags) |
| { |
| struct procfs_args tmp; |
| |
| if (copy_from_user(&tmp, args, sizeof(tmp))) |
| return -EFAULT; |
| |
| return do_mount("", dirname, "proc", flags, NULL); |
| } |
| |
| asmlinkage int |
| osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data) |
| { |
| int retval = -EINVAL; |
| char *name; |
| |
| lock_kernel(); |
| |
| name = getname(path); |
| retval = PTR_ERR(name); |
| if (IS_ERR(name)) |
| goto out; |
| switch (typenr) { |
| case 1: |
| retval = osf_ufs_mount(name, data, flag); |
| break; |
| case 6: |
| retval = osf_cdfs_mount(name, data, flag); |
| break; |
| case 9: |
| retval = osf_procfs_mount(name, data, flag); |
| break; |
| default: |
| printk("osf_mount(%ld, %x)\n", typenr, flag); |
| } |
| putname(name); |
| out: |
| unlock_kernel(); |
| return retval; |
| } |
| |
| asmlinkage int |
| osf_utsname(char __user *name) |
| { |
| int error; |
| |
| down_read(&uts_sem); |
| error = -EFAULT; |
| if (copy_to_user(name + 0, system_utsname.sysname, 32)) |
| goto out; |
| if (copy_to_user(name + 32, system_utsname.nodename, 32)) |
| goto out; |
| if (copy_to_user(name + 64, system_utsname.release, 32)) |
| goto out; |
| if (copy_to_user(name + 96, system_utsname.version, 32)) |
| goto out; |
| if (copy_to_user(name + 128, system_utsname.machine, 32)) |
| goto out; |
| |
| error = 0; |
| out: |
| up_read(&uts_sem); |
| return error; |
| } |
| |
| asmlinkage unsigned long |
| sys_getpagesize(void) |
| { |
| return PAGE_SIZE; |
| } |
| |
| asmlinkage unsigned long |
| sys_getdtablesize(void) |
| { |
| return NR_OPEN; |
| } |
| |
| /* |
| * For compatibility with OSF/1 only. Use utsname(2) instead. |
| */ |
| asmlinkage int |
| osf_getdomainname(char __user *name, int namelen) |
| { |
| unsigned len; |
| int i; |
| |
| if (!access_ok(VERIFY_WRITE, name, namelen)) |
| return -EFAULT; |
| |
| len = namelen; |
| if (namelen > 32) |
| len = 32; |
| |
| down_read(&uts_sem); |
| for (i = 0; i < len; ++i) { |
| __put_user(system_utsname.domainname[i], name + i); |
| if (system_utsname.domainname[i] == '\0') |
| break; |
| } |
| up_read(&uts_sem); |
| |
| return 0; |
| } |
| |
| /* |
| * The following stuff should move into a header file should it ever |
| * be labeled "officially supported." Right now, there is just enough |
| * support to avoid applications (such as tar) printing error |
| * messages. The attributes are not really implemented. |
| */ |
| |
| /* |
| * Values for Property list entry flag |
| */ |
| #define PLE_PROPAGATE_ON_COPY 0x1 /* cp(1) will copy entry |
| by default */ |
| #define PLE_FLAG_MASK 0x1 /* Valid flag values */ |
| #define PLE_FLAG_ALL -1 /* All flag value */ |
| |
| struct proplistname_args { |
| unsigned int pl_mask; |
| unsigned int pl_numnames; |
| char **pl_names; |
| }; |
| |
| union pl_args { |
| struct setargs { |
| char __user *path; |
| long follow; |
| long nbytes; |
| char __user *buf; |
| } set; |
| struct fsetargs { |
| long fd; |
| long nbytes; |
| char __user *buf; |
| } fset; |
| struct getargs { |
| char __user *path; |
| long follow; |
| struct proplistname_args __user *name_args; |
| long nbytes; |
| char __user *buf; |
| int __user *min_buf_size; |
| } get; |
| struct fgetargs { |
| long fd; |
| struct proplistname_args __user *name_args; |
| long nbytes; |
| char __user *buf; |
| int __user *min_buf_size; |
| } fget; |
| struct delargs { |
| char __user *path; |
| long follow; |
| struct proplistname_args __user *name_args; |
| } del; |
| struct fdelargs { |
| long fd; |
| struct proplistname_args __user *name_args; |
| } fdel; |
| }; |
| |
| enum pl_code { |
| PL_SET = 1, PL_FSET = 2, |
| PL_GET = 3, PL_FGET = 4, |
| PL_DEL = 5, PL_FDEL = 6 |
| }; |
| |
| asmlinkage long |
| osf_proplist_syscall(enum pl_code code, union pl_args __user *args) |
| { |
| long error; |
| int __user *min_buf_size_ptr; |
| |
| lock_kernel(); |
| switch (code) { |
| case PL_SET: |
| if (get_user(error, &args->set.nbytes)) |
| error = -EFAULT; |
| break; |
| case PL_FSET: |
| if (get_user(error, &args->fset.nbytes)) |
| error = -EFAULT; |
| break; |
| case PL_GET: |
| error = get_user(min_buf_size_ptr, &args->get.min_buf_size); |
| if (error) |
| break; |
| error = put_user(0, min_buf_size_ptr); |
| break; |
| case PL_FGET: |
| error = get_user(min_buf_size_ptr, &args->fget.min_buf_size); |
| if (error) |
| break; |
| error = put_user(0, min_buf_size_ptr); |
| break; |
| case PL_DEL: |
| case PL_FDEL: |
| error = 0; |
| break; |
| default: |
| error = -EOPNOTSUPP; |
| break; |
| }; |
| unlock_kernel(); |
| return error; |
| } |
| |
| asmlinkage int |
| osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss) |
| { |
| unsigned long usp = rdusp(); |
| unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size; |
| unsigned long oss_os = on_sig_stack(usp); |
| int error; |
| |
| if (uss) { |
| void __user *ss_sp; |
| |
| error = -EFAULT; |
| if (get_user(ss_sp, &uss->ss_sp)) |
| goto out; |
| |
| /* If the current stack was set with sigaltstack, don't |
| swap stacks while we are on it. */ |
| error = -EPERM; |
| if (current->sas_ss_sp && on_sig_stack(usp)) |
| goto out; |
| |
| /* Since we don't know the extent of the stack, and we don't |
| track onstack-ness, but rather calculate it, we must |
| presume a size. Ho hum this interface is lossy. */ |
| current->sas_ss_sp = (unsigned long)ss_sp - SIGSTKSZ; |
| current->sas_ss_size = SIGSTKSZ; |
| } |
| |
| if (uoss) { |
| error = -EFAULT; |
| if (! access_ok(VERIFY_WRITE, uoss, sizeof(*uoss)) |
| || __put_user(oss_sp, &uoss->ss_sp) |
| || __put_user(oss_os, &uoss->ss_onstack)) |
| goto out; |
| } |
| |
| error = 0; |
| out: |
| return error; |
| } |
| |
| asmlinkage long |
| osf_sysinfo(int command, char __user *buf, long count) |
| { |
| static char * sysinfo_table[] = { |
| system_utsname.sysname, |
| system_utsname.nodename, |
| system_utsname.release, |
| system_utsname.version, |
| system_utsname.machine, |
| "alpha", /* instruction set architecture */ |
| "dummy", /* hardware serial number */ |
| "dummy", /* hardware manufacturer */ |
| "dummy", /* secure RPC domain */ |
| }; |
| unsigned long offset; |
| char *res; |
| long len, err = -EINVAL; |
| |
| offset = command-1; |
| if (offset >= sizeof(sysinfo_table)/sizeof(char *)) { |
| /* Digital UNIX has a few unpublished interfaces here */ |
| printk("sysinfo(%d)", command); |
| goto out; |
| } |
| |
| down_read(&uts_sem); |
| res = sysinfo_table[offset]; |
| len = strlen(res)+1; |
| if (len > count) |
| len = count; |
| if (copy_to_user(buf, res, len)) |
| err = -EFAULT; |
| else |
| err = 0; |
| up_read(&uts_sem); |
| out: |
| return err; |
| } |
| |
| asmlinkage unsigned long |
| osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, |
| int __user *start, void __user *arg) |
| { |
| unsigned long w; |
| struct percpu_struct *cpu; |
| |
| switch (op) { |
| case GSI_IEEE_FP_CONTROL: |
| /* Return current software fp control & status bits. */ |
| /* Note that DU doesn't verify available space here. */ |
| |
| w = current_thread_info()->ieee_state & IEEE_SW_MASK; |
| w = swcr_update_status(w, rdfpcr()); |
| if (put_user(w, (unsigned long __user *) buffer)) |
| return -EFAULT; |
| return 0; |
| |
| case GSI_IEEE_STATE_AT_SIGNAL: |
| /* |
| * Not sure anybody will ever use this weird stuff. These |
| * ops can be used (under OSF/1) to set the fpcr that should |
| * be used when a signal handler starts executing. |
| */ |
| break; |
| |
| case GSI_UACPROC: |
| if (nbytes < sizeof(unsigned int)) |
| return -EINVAL; |
| w = (current_thread_info()->flags >> UAC_SHIFT) & UAC_BITMASK; |
| if (put_user(w, (unsigned int __user *)buffer)) |
| return -EFAULT; |
| return 1; |
| |
| case GSI_PROC_TYPE: |
| if (nbytes < sizeof(unsigned long)) |
| return -EINVAL; |
| cpu = (struct percpu_struct*) |
| ((char*)hwrpb + hwrpb->processor_offset); |
| w = cpu->type; |
| if (put_user(w, (unsigned long __user*)buffer)) |
| return -EFAULT; |
| return 1; |
| |
| case GSI_GET_HWRPB: |
| if (nbytes < sizeof(*hwrpb)) |
| return -EINVAL; |
| if (copy_to_user(buffer, hwrpb, nbytes) != 0) |
| return -EFAULT; |
| return 1; |
| |
| default: |
| break; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| asmlinkage unsigned long |
| osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, |
| int __user *start, void __user *arg) |
| { |
| switch (op) { |
| case SSI_IEEE_FP_CONTROL: { |
| unsigned long swcr, fpcr; |
| unsigned int *state; |
| |
| /* |
| * Alpha Architecture Handbook 4.7.7.3: |
| * To be fully IEEE compiant, we must track the current IEEE |
| * exception state in software, because spurrious bits can be |
| * set in the trap shadow of a software-complete insn. |
| */ |
| |
| if (get_user(swcr, (unsigned long __user *)buffer)) |
| return -EFAULT; |
| state = ¤t_thread_info()->ieee_state; |
| |
| /* Update softare trap enable bits. */ |
| *state = (*state & ~IEEE_SW_MASK) | (swcr & IEEE_SW_MASK); |
| |
| /* Update the real fpcr. */ |
| fpcr = rdfpcr() & FPCR_DYN_MASK; |
| fpcr |= ieee_swcr_to_fpcr(swcr); |
| wrfpcr(fpcr); |
| |
| return 0; |
| } |
| |
| case SSI_IEEE_RAISE_EXCEPTION: { |
| unsigned long exc, swcr, fpcr, fex; |
| unsigned int *state; |
| |
| if (get_user(exc, (unsigned long __user *)buffer)) |
| return -EFAULT; |
| state = ¤t_thread_info()->ieee_state; |
| exc &= IEEE_STATUS_MASK; |
| |
| /* Update softare trap enable bits. */ |
| swcr = (*state & IEEE_SW_MASK) | exc; |
| *state |= exc; |
| |
| /* Update the real fpcr. */ |
| fpcr = rdfpcr(); |
| fpcr |= ieee_swcr_to_fpcr(swcr); |
| wrfpcr(fpcr); |
| |
| /* If any exceptions set by this call, and are unmasked, |
| send a signal. Old exceptions are not signaled. */ |
| fex = (exc >> IEEE_STATUS_TO_EXCSUM_SHIFT) & swcr; |
| if (fex) { |
| siginfo_t info; |
| int si_code = 0; |
| |
| if (fex & IEEE_TRAP_ENABLE_DNO) si_code = FPE_FLTUND; |
| if (fex & IEEE_TRAP_ENABLE_INE) si_code = FPE_FLTRES; |
| if (fex & IEEE_TRAP_ENABLE_UNF) si_code = FPE_FLTUND; |
| if (fex & IEEE_TRAP_ENABLE_OVF) si_code = FPE_FLTOVF; |
| if (fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV; |
| if (fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV; |
| |
| info.si_signo = SIGFPE; |
| info.si_errno = 0; |
| info.si_code = si_code; |
| info.si_addr = NULL; /* FIXME */ |
| send_sig_info(SIGFPE, &info, current); |
| } |
| return 0; |
| } |
| |
| case SSI_IEEE_STATE_AT_SIGNAL: |
| case SSI_IEEE_IGNORE_STATE_AT_SIGNAL: |
| /* |
| * Not sure anybody will ever use this weird stuff. These |
| * ops can be used (under OSF/1) to set the fpcr that should |
| * be used when a signal handler starts executing. |
| */ |
| break; |
| |
| case SSI_NVPAIRS: { |
| unsigned long v, w, i; |
| unsigned int old, new; |
| |
| for (i = 0; i < nbytes; ++i) { |
| |
| if (get_user(v, 2*i + (unsigned int __user *)buffer)) |
| return -EFAULT; |
| if (get_user(w, 2*i + 1 + (unsigned int __user *)buffer)) |
| return -EFAULT; |
| switch (v) { |
| case SSIN_UACPROC: |
| again: |
| old = current_thread_info()->flags; |
| new = old & ~(UAC_BITMASK << UAC_SHIFT); |
| new = new | (w & UAC_BITMASK) << UAC_SHIFT; |
| if (cmpxchg(¤t_thread_info()->flags, |
| old, new) != old) |
| goto again; |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| return 0; |
| } |
| |
| default: |
| break; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| /* Translations due to the fact that OSF's time_t is an int. Which |
| affects all sorts of things, like timeval and itimerval. */ |
| |
| extern struct timezone sys_tz; |
| |
| struct timeval32 |
| { |
| int tv_sec, tv_usec; |
| }; |
| |
| struct itimerval32 |
| { |
| struct timeval32 it_interval; |
| struct timeval32 it_value; |
| }; |
| |
| static inline long |
| get_tv32(struct timeval *o, struct timeval32 __user *i) |
| { |
| return (!access_ok(VERIFY_READ, i, sizeof(*i)) || |
| (__get_user(o->tv_sec, &i->tv_sec) | |
| __get_user(o->tv_usec, &i->tv_usec))); |
| } |
| |
| static inline long |
| put_tv32(struct timeval32 __user *o, struct timeval *i) |
| { |
| return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) || |
| (__put_user(i->tv_sec, &o->tv_sec) | |
| __put_user(i->tv_usec, &o->tv_usec))); |
| } |
| |
| static inline long |
| get_it32(struct itimerval *o, struct itimerval32 __user *i) |
| { |
| return (!access_ok(VERIFY_READ, i, sizeof(*i)) || |
| (__get_user(o->it_interval.tv_sec, &i->it_interval.tv_sec) | |
| __get_user(o->it_interval.tv_usec, &i->it_interval.tv_usec) | |
| __get_user(o->it_value.tv_sec, &i->it_value.tv_sec) | |
| __get_user(o->it_value.tv_usec, &i->it_value.tv_usec))); |
| } |
| |
| static inline long |
| put_it32(struct itimerval32 __user *o, struct itimerval *i) |
| { |
| return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) || |
| (__put_user(i->it_interval.tv_sec, &o->it_interval.tv_sec) | |
| __put_user(i->it_interval.tv_usec, &o->it_interval.tv_usec) | |
| __put_user(i->it_value.tv_sec, &o->it_value.tv_sec) | |
| __put_user(i->it_value.tv_usec, &o->it_value.tv_usec))); |
| } |
| |
| static inline void |
| jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value) |
| { |
| value->tv_usec = (jiffies % HZ) * (1000000L / HZ); |
| value->tv_sec = jiffies / HZ; |
| } |
| |
| asmlinkage int |
| osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz) |
| { |
| if (tv) { |
| struct timeval ktv; |
| do_gettimeofday(&ktv); |
| if (put_tv32(tv, &ktv)) |
| return -EFAULT; |
| } |
| if (tz) { |
| if (copy_to_user(tz, &sys_tz, sizeof(sys_tz))) |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| asmlinkage int |
| osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz) |
| { |
| struct timespec kts; |
| struct timezone ktz; |
| |
| if (tv) { |
| if (get_tv32((struct timeval *)&kts, tv)) |
| return -EFAULT; |
| } |
| if (tz) { |
| if (copy_from_user(&ktz, tz, sizeof(*tz))) |
| return -EFAULT; |
| } |
| |
| kts.tv_nsec *= 1000; |
| |
| return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL); |
| } |
| |
| asmlinkage int |
| osf_getitimer(int which, struct itimerval32 __user *it) |
| { |
| struct itimerval kit; |
| int error; |
| |
| error = do_getitimer(which, &kit); |
| if (!error && put_it32(it, &kit)) |
| error = -EFAULT; |
| |
| return error; |
| } |
| |
| asmlinkage int |
| osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __user *out) |
| { |
| struct itimerval kin, kout; |
| int error; |
| |
| if (in) { |
| if (get_it32(&kin, in)) |
| return -EFAULT; |
| } else |
| memset(&kin, 0, sizeof(kin)); |
| |
| error = do_setitimer(which, &kin, out ? &kout : NULL); |
| if (error || !out) |
| return error; |
| |
| if (put_it32(out, &kout)) |
| return -EFAULT; |
| |
| return 0; |
| |
| } |
| |
| asmlinkage int |
| osf_utimes(char __user *filename, struct timeval32 __user *tvs) |
| { |
| struct timeval ktvs[2]; |
| |
| if (tvs) { |
| if (get_tv32(&ktvs[0], &tvs[0]) || |
| get_tv32(&ktvs[1], &tvs[1])) |
| return -EFAULT; |
| } |
| |
| return do_utimes(AT_FDCWD, filename, tvs ? ktvs : NULL); |
| } |
| |
| #define MAX_SELECT_SECONDS \ |
| ((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1) |
| |
| asmlinkage int |
| osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, |
| struct timeval32 __user *tvp) |
| { |
| fd_set_bits fds; |
| char *bits; |
| size_t size; |
| long timeout; |
| int ret = -EINVAL; |
| struct fdtable *fdt; |
| int max_fdset; |
| |
| timeout = MAX_SCHEDULE_TIMEOUT; |
| if (tvp) { |
| time_t sec, usec; |
| |
| if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp)) |
| || __get_user(sec, &tvp->tv_sec) |
| || __get_user(usec, &tvp->tv_usec)) { |
| ret = -EFAULT; |
| goto out_nofds; |
| } |
| |
| if (sec < 0 || usec < 0) |
| goto out_nofds; |
| |
| if ((unsigned long) sec < MAX_SELECT_SECONDS) { |
| timeout = (usec + 1000000/HZ - 1) / (1000000/HZ); |
| timeout += sec * (unsigned long) HZ; |
| } |
| } |
| |
| rcu_read_lock(); |
| fdt = files_fdtable(current->files); |
| max_fdset = fdt->max_fdset; |
| rcu_read_unlock(); |
| if (n < 0 || n > max_fdset) |
| goto out_nofds; |
| |
| /* |
| * We need 6 bitmaps (in/out/ex for both incoming and outgoing), |
| * since we used fdset we need to allocate memory in units of |
| * long-words. |
| */ |
| ret = -ENOMEM; |
| size = FDS_BYTES(n); |
| bits = kmalloc(6 * size, GFP_KERNEL); |
| if (!bits) |
| goto out_nofds; |
| fds.in = (unsigned long *) bits; |
| fds.out = (unsigned long *) (bits + size); |
| fds.ex = (unsigned long *) (bits + 2*size); |
| fds.res_in = (unsigned long *) (bits + 3*size); |
| fds.res_out = (unsigned long *) (bits + 4*size); |
| fds.res_ex = (unsigned long *) (bits + 5*size); |
| |
| if ((ret = get_fd_set(n, inp->fds_bits, fds.in)) || |
| (ret = get_fd_set(n, outp->fds_bits, fds.out)) || |
| (ret = get_fd_set(n, exp->fds_bits, fds.ex))) |
| goto out; |
| zero_fd_set(n, fds.res_in); |
| zero_fd_set(n, fds.res_out); |
| zero_fd_set(n, fds.res_ex); |
| |
| ret = do_select(n, &fds, &timeout); |
| |
| /* OSF does not copy back the remaining time. */ |
| |
| if (ret < 0) |
| goto out; |
| if (!ret) { |
| ret = -ERESTARTNOHAND; |
| if (signal_pending(current)) |
| goto out; |
| ret = 0; |
| } |
| |
| if (set_fd_set(n, inp->fds_bits, fds.res_in) || |
| set_fd_set(n, outp->fds_bits, fds.res_out) || |
| set_fd_set(n, exp->fds_bits, fds.res_ex)) |
| ret = -EFAULT; |
| |
| out: |
| kfree(bits); |
| out_nofds: |
| return ret; |
| } |
| |
| struct rusage32 { |
| struct timeval32 ru_utime; /* user time used */ |
| struct timeval32 ru_stime; /* system time used */ |
| long ru_maxrss; /* maximum resident set size */ |
| long ru_ixrss; /* integral shared memory size */ |
| long ru_idrss; /* integral unshared data size */ |
| long ru_isrss; /* integral unshared stack size */ |
| long ru_minflt; /* page reclaims */ |
| long ru_majflt; /* page faults */ |
| long ru_nswap; /* swaps */ |
| long ru_inblock; /* block input operations */ |
| long ru_oublock; /* block output operations */ |
| long ru_msgsnd; /* messages sent */ |
| long ru_msgrcv; /* messages received */ |
| long ru_nsignals; /* signals received */ |
| long ru_nvcsw; /* voluntary context switches */ |
| long ru_nivcsw; /* involuntary " */ |
| }; |
| |
| asmlinkage int |
| osf_getrusage(int who, struct rusage32 __user *ru) |
| { |
| struct rusage32 r; |
| |
| if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN) |
| return -EINVAL; |
| |
| memset(&r, 0, sizeof(r)); |
| switch (who) { |
| case RUSAGE_SELF: |
| jiffies_to_timeval32(current->utime, &r.ru_utime); |
| jiffies_to_timeval32(current->stime, &r.ru_stime); |
| r.ru_minflt = current->min_flt; |
| r.ru_majflt = current->maj_flt; |
| break; |
| case RUSAGE_CHILDREN: |
| jiffies_to_timeval32(current->signal->cutime, &r.ru_utime); |
| jiffies_to_timeval32(current->signal->cstime, &r.ru_stime); |
| r.ru_minflt = current->signal->cmin_flt; |
| r.ru_majflt = current->signal->cmaj_flt; |
| break; |
| } |
| |
| return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0; |
| } |
| |
| asmlinkage long |
| osf_wait4(pid_t pid, int __user *ustatus, int options, |
| struct rusage32 __user *ur) |
| { |
| struct rusage r; |
| long ret, err; |
| mm_segment_t old_fs; |
| |
| if (!ur) |
| return sys_wait4(pid, ustatus, options, NULL); |
| |
| old_fs = get_fs(); |
| |
| set_fs (KERNEL_DS); |
| ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r); |
| set_fs (old_fs); |
| |
| if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur))) |
| return -EFAULT; |
| |
| err = 0; |
| err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec); |
| err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec); |
| err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec); |
| err |= __put_user(r.ru_stime.tv_usec, &ur->ru_stime.tv_usec); |
| err |= __put_user(r.ru_maxrss, &ur->ru_maxrss); |
| err |= __put_user(r.ru_ixrss, &ur->ru_ixrss); |
| err |= __put_user(r.ru_idrss, &ur->ru_idrss); |
| err |= __put_user(r.ru_isrss, &ur->ru_isrss); |
| err |= __put_user(r.ru_minflt, &ur->ru_minflt); |
| err |= __put_user(r.ru_majflt, &ur->ru_majflt); |
| err |= __put_user(r.ru_nswap, &ur->ru_nswap); |
| err |= __put_user(r.ru_inblock, &ur->ru_inblock); |
| err |= __put_user(r.ru_oublock, &ur->ru_oublock); |
| err |= __put_user(r.ru_msgsnd, &ur->ru_msgsnd); |
| err |= __put_user(r.ru_msgrcv, &ur->ru_msgrcv); |
| err |= __put_user(r.ru_nsignals, &ur->ru_nsignals); |
| err |= __put_user(r.ru_nvcsw, &ur->ru_nvcsw); |
| err |= __put_user(r.ru_nivcsw, &ur->ru_nivcsw); |
| |
| return err ? err : ret; |
| } |
| |
| /* |
| * I don't know what the parameters are: the first one |
| * seems to be a timeval pointer, and I suspect the second |
| * one is the time remaining.. Ho humm.. No documentation. |
| */ |
| asmlinkage int |
| osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remain) |
| { |
| struct timeval tmp; |
| unsigned long ticks; |
| |
| if (get_tv32(&tmp, sleep)) |
| goto fault; |
| |
| ticks = timeval_to_jiffies(&tmp); |
| |
| ticks = schedule_timeout_interruptible(ticks); |
| |
| if (remain) { |
| jiffies_to_timeval(ticks, &tmp); |
| if (put_tv32(remain, &tmp)) |
| goto fault; |
| } |
| |
| return 0; |
| fault: |
| return -EFAULT; |
| } |
| |
| |
| struct timex32 { |
| unsigned int modes; /* mode selector */ |
| long offset; /* time offset (usec) */ |
| long freq; /* frequency offset (scaled ppm) */ |
| long maxerror; /* maximum error (usec) */ |
| long esterror; /* estimated error (usec) */ |
| int status; /* clock command/status */ |
| long constant; /* pll time constant */ |
| long precision; /* clock precision (usec) (read only) */ |
| long tolerance; /* clock frequency tolerance (ppm) |
| * (read only) |
| */ |
| struct timeval32 time; /* (read only) */ |
| long tick; /* (modified) usecs between clock ticks */ |
| |
| long ppsfreq; /* pps frequency (scaled ppm) (ro) */ |
| long jitter; /* pps jitter (us) (ro) */ |
| int shift; /* interval duration (s) (shift) (ro) */ |
| long stabil; /* pps stability (scaled ppm) (ro) */ |
| long jitcnt; /* jitter limit exceeded (ro) */ |
| long calcnt; /* calibration intervals (ro) */ |
| long errcnt; /* calibration errors (ro) */ |
| long stbcnt; /* stability limit exceeded (ro) */ |
| |
| int :32; int :32; int :32; int :32; |
| int :32; int :32; int :32; int :32; |
| int :32; int :32; int :32; int :32; |
| }; |
| |
| asmlinkage int |
| sys_old_adjtimex(struct timex32 __user *txc_p) |
| { |
| struct timex txc; |
| int ret; |
| |
| /* copy relevant bits of struct timex. */ |
| if (copy_from_user(&txc, txc_p, offsetof(struct timex32, time)) || |
| copy_from_user(&txc.tick, &txc_p->tick, sizeof(struct timex32) - |
| offsetof(struct timex32, time))) |
| return -EFAULT; |
| |
| ret = do_adjtimex(&txc); |
| if (ret < 0) |
| return ret; |
| |
| /* copy back to timex32 */ |
| if (copy_to_user(txc_p, &txc, offsetof(struct timex32, time)) || |
| (copy_to_user(&txc_p->tick, &txc.tick, sizeof(struct timex32) - |
| offsetof(struct timex32, tick))) || |
| (put_tv32(&txc_p->time, &txc.time))) |
| return -EFAULT; |
| |
| return ret; |
| } |
| |
| /* Get an address range which is currently unmapped. Similar to the |
| generic version except that we know how to honor ADDR_LIMIT_32BIT. */ |
| |
| static unsigned long |
| arch_get_unmapped_area_1(unsigned long addr, unsigned long len, |
| unsigned long limit) |
| { |
| struct vm_area_struct *vma = find_vma(current->mm, addr); |
| |
| while (1) { |
| /* At this point: (!vma || addr < vma->vm_end). */ |
| if (limit - len < addr) |
| return -ENOMEM; |
| if (!vma || addr + len <= vma->vm_start) |
| return addr; |
| addr = vma->vm_end; |
| vma = vma->vm_next; |
| } |
| } |
| |
| unsigned long |
| arch_get_unmapped_area(struct file *filp, unsigned long addr, |
| unsigned long len, unsigned long pgoff, |
| unsigned long flags) |
| { |
| unsigned long limit; |
| |
| /* "32 bit" actually means 31 bit, since pointers sign extend. */ |
| if (current->personality & ADDR_LIMIT_32BIT) |
| limit = 0x80000000; |
| else |
| limit = TASK_SIZE; |
| |
| if (len > limit) |
| return -ENOMEM; |
| |
| /* First, see if the given suggestion fits. |
| |
| The OSF/1 loader (/sbin/loader) relies on us returning an |
| address larger than the requested if one exists, which is |
| a terribly broken way to program. |
| |
| That said, I can see the use in being able to suggest not |
| merely specific addresses, but regions of memory -- perhaps |
| this feature should be incorporated into all ports? */ |
| |
| if (addr) { |
| addr = arch_get_unmapped_area_1 (PAGE_ALIGN(addr), len, limit); |
| if (addr != (unsigned long) -ENOMEM) |
| return addr; |
| } |
| |
| /* Next, try allocating at TASK_UNMAPPED_BASE. */ |
| addr = arch_get_unmapped_area_1 (PAGE_ALIGN(TASK_UNMAPPED_BASE), |
| len, limit); |
| if (addr != (unsigned long) -ENOMEM) |
| return addr; |
| |
| /* Finally, try allocating in low memory. */ |
| addr = arch_get_unmapped_area_1 (PAGE_SIZE, len, limit); |
| |
| return addr; |
| } |
| |
| #ifdef CONFIG_OSF4_COMPAT |
| |
| /* Clear top 32 bits of iov_len in the user's buffer for |
| compatibility with old versions of OSF/1 where iov_len |
| was defined as int. */ |
| static int |
| osf_fix_iov_len(const struct iovec __user *iov, unsigned long count) |
| { |
| unsigned long i; |
| |
| for (i = 0 ; i < count ; i++) { |
| int __user *iov_len_high = (int __user *)&iov[i].iov_len + 1; |
| |
| if (put_user(0, iov_len_high)) |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| asmlinkage ssize_t |
| osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long count) |
| { |
| if (unlikely(personality(current->personality) == PER_OSF4)) |
| if (osf_fix_iov_len(vector, count)) |
| return -EFAULT; |
| return sys_readv(fd, vector, count); |
| } |
| |
| asmlinkage ssize_t |
| osf_writev(unsigned long fd, const struct iovec __user * vector, unsigned long count) |
| { |
| if (unlikely(personality(current->personality) == PER_OSF4)) |
| if (osf_fix_iov_len(vector, count)) |
| return -EFAULT; |
| return sys_writev(fd, vector, count); |
| } |
| |
| #endif |