| /* |
| * sh7724 MMCIF loader |
| * |
| * Copyright (C) 2010 Magnus Damm |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/mmc/sh_mmcif.h> |
| #include <mach/romimage.h> |
| |
| #define MMCIF_BASE (void __iomem *)0xa4ca0000 |
| |
| #define MSTPCR2 0xa4150038 |
| #define PTWCR 0xa4050146 |
| #define PTXCR 0xa4050148 |
| #define PSELA 0xa405014e |
| #define PSELE 0xa4050156 |
| #define HIZCRC 0xa405015c |
| #define DRVCRA 0xa405018a |
| |
| enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT, |
| MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE }; |
| |
| /* SH7724 specific MMCIF loader |
| * |
| * loads the romImage from an MMC card starting from block 512 |
| * use the following line to write the romImage to an MMC card |
| * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512 |
| */ |
| asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes) |
| { |
| mmcif_update_progress(MMCIF_PROGRESS_ENTER); |
| |
| /* enable clock to the MMCIF hardware block */ |
| __raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2); |
| |
| /* setup pins D7-D0 */ |
| __raw_writew(0x0000, PTWCR); |
| |
| /* setup pins MMC_CLK, MMC_CMD */ |
| __raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR); |
| |
| /* select D3-D0 pin function */ |
| __raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA); |
| |
| /* select D7-D4 pin function */ |
| __raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE); |
| |
| /* disable Hi-Z for the MMC pins */ |
| __raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC); |
| |
| /* high drive capability for MMC pins */ |
| __raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA); |
| |
| mmcif_update_progress(MMCIF_PROGRESS_INIT); |
| |
| /* setup MMCIF hardware */ |
| sh_mmcif_boot_init(MMCIF_BASE); |
| |
| mmcif_update_progress(MMCIF_PROGRESS_LOAD); |
| |
| /* load kernel via MMCIF interface */ |
| sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes); |
| |
| /* disable clock to the MMCIF hardware block */ |
| __raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2); |
| |
| mmcif_update_progress(MMCIF_PROGRESS_DONE); |
| } |