ARM: Merge for-2635-4/spi-devs
Merge branch 'for-2635-4/spi-devs' into for-2635-4/partial2
Conflicts:
arch/arm/mach-s5pc100/include/mach/map.h
arch/arm/mach-s5pv210/Makefile
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3f8718f..1cb098f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -699,14 +699,14 @@
help
Samsung S5P6442 CPU based systems
-config ARCH_S5PC1XX
- bool "Samsung S5PC1XX"
+config ARCH_S5PC100
+ bool "Samsung S5PC100"
select GENERIC_GPIO
select HAVE_CLK
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
help
- Samsung S5PC1XX series based systems
+ Samsung S5PC100 series based systems
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
@@ -890,7 +890,6 @@
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
-source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
@@ -909,9 +908,7 @@
source "arch/arm/mach-s5p6442/Kconfig"
-if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
-endif
source "arch/arm/mach-s5pv210/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9505a70..f7cb6d4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -167,7 +167,7 @@
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
-machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
+machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
@@ -192,7 +192,6 @@
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
-plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung
plat-$(CONFIG_PLAT_S5P) := s5p samsung
ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 69e9fbf..1f2f412 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -90,6 +90,7 @@
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select S3C_DEV_FB
+ select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C64XX_SETUP_SDHCI
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 9d51455..d0c6e9b 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -64,6 +64,8 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -262,6 +264,8 @@
&smdk6410_lcd_powerdev,
&smdk6410_smsc911x,
+ &s3c_device_adc,
+ &s3c_device_ts,
};
#ifdef CONFIG_REGULATOR
@@ -596,6 +600,12 @@
{ I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
};
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
static void __init smdk6410_map_io(void)
{
u32 tmp;
@@ -625,6 +635,8 @@
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
index 77aeffd..ef00cb7 100644
--- a/arch/arm/mach-s5p6440/Kconfig
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -16,6 +16,8 @@
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
+ select SAMSUNG_DEV_TS
+ select SAMSUNG_DEV_ADC
help
Machine support for the Samsung SMDK6440
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
index ca3b320..b2fe6a5 100644
--- a/arch/arm/mach-s5p6440/cpu.c
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -61,6 +61,7 @@
void __init s5p6440_map_io(void)
{
/* initialize any device information early */
+ s3c_device_adc.name = "s3c64xx-adc";
}
void __init s5p6440_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
index 8246895..d0124f3 100644
--- a/arch/arm/mach-s5p6440/include/mach/map.h
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -72,8 +72,11 @@
/* PCM */
#define S5P6440_PA_PCM 0xF2100000
+#define S5P6440_PA_ADC (0xF3000000)
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5P6440_PA_UART
#define S3C_PA_IIC S5P6440_PA_IIC0
+#define SAMSUNG_PA_ADC S5P6440_PA_ADC
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
index d7fede9..f994817 100644
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -38,6 +38,8 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
#define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -85,6 +87,14 @@
static struct platform_device *smdk6440_devices[] __initdata = {
&s5p6440_device_iis,
+ &s3c_device_adc,
+ &s3c_device_ts,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
};
static void __init smdk6440_map_io(void)
@@ -96,6 +106,8 @@
static void __init smdk6440_machine_init(void)
{
+ s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 8593337..2eb9497 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -5,10 +5,12 @@
# Configuration options for the S5PC100 CPU
+if ARCH_S5PC100
+
config CPU_S5PC100
bool
- select CPU_S5PC100_INIT
- select CPU_S5PC100_CLOCK
+ select PLAT_S5P
+ select S5P_EXT_INT
help
Enable S5PC100 CPU support
@@ -17,17 +19,22 @@
help
Common setup code for S5PC1XX with an 24bpp RGB display helper.
-config S5PC100_SETUP_SDHCI
- bool
- select S5PC1XX_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S5PC100 based SDHCI systems
-
config S5PC100_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
+config S5PC100_SETUP_SDHCI
+ bool
+ select S5PC100_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S5PC100 based SDHCI systems
+
+config S5PC100_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
@@ -41,3 +48,5 @@
select S5PC100_SETUP_SDHCI
help
Machine support for the Samsung SMDKC100
+
+endif
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index 65a2911..e1081a9 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -11,18 +11,23 @@
# Core support for S5PC100 system
-obj-$(CONFIG_CPU_S5PC100) += cpu.o gpiolib.o
+obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o irq-gpio.o
obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
# Helper and device support
obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
# machine support
+
obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
+
+# device support
+obj-y += dev-audio.o
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index d79e757..d424a9f 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,47 +22,53 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
-#include <asm/proc-fns.h>
-
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/proc-fns.h>
+
#include <mach/hardware.h>
#include <mach/map.h>
#include <asm/irq.h>
-#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
-#include <plat/regs-power.h>
+#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/sdhci.h>
#include <plat/iic-core.h>
+#include <plat/sdhci.h>
#include <plat/s5pc100.h>
/* Initial IO mappings */
static struct map_desc s5pc100_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC2,
+ .pfn = __phys_to_pfn(S5PC100_PA_VIC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC100_VA_OTHERS,
+ .pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }
};
static void s5pc100_idle(void)
{
- unsigned long tmp;
+ if (!need_resched())
+ cpu_do_idle();
- tmp = __raw_readl(S5PC100_PWR_CFG);
- tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
- tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
- tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
- __raw_writel(tmp, S5PC100_PWR_CFG);
-
- tmp = __raw_readl(S5PC100_OTHERS);
- tmp |= S5PC100_PMU_INT_DISABLE;
- __raw_writel(tmp, S5PC100_OTHERS);
-
- cpu_do_idle();
+ local_irq_enable();
}
/* s5pc100_map_io
@@ -86,22 +92,23 @@
void __init s5pc100_init_clocks(int xtal)
{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
s3c24xx_register_baseclocks(xtal);
- s5pc1xx_register_clocks();
+ s5p_register_clocks(xtal);
s5pc100_register_clocks();
s5pc100_setup_clocks();
}
void __init s5pc100_init_irq(void)
{
- u32 vic_valid[] = {~0, ~0, ~0};
+ u32 vic[] = {~0, ~0, ~0};
/* VIC0, VIC1, and VIC2 are fully populated. */
- s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
}
-struct sysdev_class s5pc100_sysclass = {
+static struct sysdev_class s5pc100_sysclass = {
.name = "s5pc100-core",
};
@@ -118,9 +125,10 @@
int __init s5pc100_init(void)
{
- printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+ printk(KERN_INFO "S5PC100: Initializing architecture\n");
- s5pc1xx_idle = s5pc100_idle;
+ /* set idle function */
+ pm_idle = s5pc100_idle;
return sysdev_register(&s5pc100_sysdev);
}
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
new file mode 100644
index 0000000..18cfe9a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -0,0 +1,287 @@
+/* linux/arch/arm/mach-s5pc100/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5pc100_cfg_i2s(struct platform_device *pdev)
+{
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case 1:
+ s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
+ break;
+
+ case 2:
+ s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
+ break;
+
+ case -1: /* Dedicated pins */
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+ .cfg_gpio = s5pc100_cfg_i2s,
+};
+
+static struct resource s5pc100_iis0_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_I2S0,
+ .end = S5PC100_PA_I2S0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_iis0 = {
+ .name = "s3c64xx-iis-v4",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pc100_iis0_resource),
+ .resource = s5pc100_iis0_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+static struct resource s5pc100_iis1_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_I2S1,
+ .end = S5PC100_PA_I2S1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_TX,
+ .end = DMACH_I2S1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_RX,
+ .end = DMACH_I2S1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_iis1 = {
+ .name = "s3c64xx-iis",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pc100_iis1_resource),
+ .resource = s5pc100_iis1_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+static struct resource s5pc100_iis2_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_I2S2,
+ .end = S5PC100_PA_I2S2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S2_TX,
+ .end = DMACH_I2S2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S2_RX,
+ .end = DMACH_I2S2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_iis2 = {
+ .name = "s3c64xx-iis",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pc100_iis2_resource),
+ .resource = s5pc100_iis2_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5));
+ break;
+
+ case 1:
+ s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3));
+ break;
+
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+ .cfg_gpio = s5pc100_pcm_cfg_gpio,
+};
+
+static struct resource s5pc100_pcm0_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_PCM0,
+ .end = S5PC100_PA_PCM0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource),
+ .resource = s5pc100_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5pc100_pcm1_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_PCM1,
+ .end = S5PC100_PA_PCM1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM1_TX,
+ .end = DMACH_PCM1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM1_RX,
+ .end = DMACH_PCM1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource),
+ .resource = s5pc100_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4));
+
+ return 0;
+}
+
+static struct resource s5pc100_ac97_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_AC97,
+ .end = S5PC100_PA_AC97 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_AC97_PCMOUT,
+ .end = DMACH_AC97_PCMOUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_AC97_PCMIN,
+ .end = DMACH_AC97_PCMIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_AC97_MICIN,
+ .end = DMACH_AC97_MICIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+ .cfg_gpio = s5pc100_ac97_cfg_gpio,
+};
+
+static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_ac97 = {
+ .name = "s3c-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pc100_ac97_resource),
+ .resource = s5pc100_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &s5pc100_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c
index c8e8336..0fab7f2 100644
--- a/arch/arm/mach-s5pc100/gpiolib.c
+++ b/arch/arm/mach-s5pc100/gpiolib.c
@@ -1,10 +1,10 @@
/*
- * arch/arm/plat-s5pc1xx/gpiolib.c
+ * arch/arm/plat-s5pc100/gpiolib.c
*
* Copyright 2009 Samsung Electronics Co
* Kyungmin Park <kyungmin.park@samsung.com>
*
- * S5PC1XX - GPIOlib support
+ * S5PC100 - GPIOlib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -61,13 +61,12 @@
* L3 8 4Bit None
*/
-#if 0
-static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
{
return S3C_IRQ_GPIO(chip->base + offset);
}
-static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
{
int base;
@@ -85,7 +84,7 @@
return IRQ_EINT(24 + offset);
return -EINVAL;
}
-#endif
+
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
@@ -382,31 +381,30 @@
};
/* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc1xx_gpioint;
-extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+extern struct irq_chip s5pc100_gpioint;
+extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
{
-#if 0
/* Interrupt */
if (chip->config == &gpio_cfg) {
int i, irq;
- chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
+ chip->chip.to_irq = s5pc100_gpiolib_to_irq;
for (i = 0; i < chip->chip.ngpio; i++) {
irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
- set_irq_chip(irq, &s5pc1xx_gpioint);
+ set_irq_chip(irq, &s5pc100_gpioint);
set_irq_data(irq, &chip->chip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
- } else if (chip->config == &gpio_cfg_eint)
- chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
-#endif
+ } else if (chip->config == &gpio_cfg_eint) {
+ chip->chip.to_irq = s5pc100_gpiolib_to_eint;
+ }
}
-static __init int s5pc1xx_gpiolib_init(void)
+static __init int s5pc100_gpiolib_init(void)
{
struct s3c_gpio_chip *chip;
int nr_chips;
@@ -419,10 +417,10 @@
samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
ARRAY_SIZE(s5pc100_gpio_chips));
-#if 0
+
/* Interrupt */
- set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
-#endif
+ set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
+
return 0;
}
-core_initcall(s5pc1xx_gpiolib_init);
+core_initcall(s5pc100_gpiolib_init);
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index e181f57..70e02e9 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,12 +22,14 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx, tmp
+ .macro addruart, rx, rtmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
- ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+ ldrne \rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
.endm
/* include the reset of the code which will do the work, we're only
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index 6713193..ba76af0 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -20,7 +20,7 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =S3C_VA_VIC0
+ ldr \base, =VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
@@ -29,18 +29,18 @@
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check the vic0
- mov \irqnr, # S3C_IRQ_OFFSET + 31
+ mov \irqnr, # S5P_IRQ_OFFSET + 31
ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
teq \irqstat, #0
@ otherwise try vic1
- addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+ addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
addeq \irqnr, \irqnr, #32
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0
@ otherwise try vic2
- addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+ addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
addeq \irqnr, \irqnr, #32
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 29a8a12..71ae1f5 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -146,6 +146,13 @@
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
+#define EINT_MODE S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x) S5PC100_GPH0(x)
+#define EINT_GPIO_1(x) S5PC100_GPH1(x)
+#define EINT_GPIO_2(x) S5PC100_GPH2(x)
+#define EINT_GPIO_3(x) S5PC100_GPH3(x)
+
#include <asm-generic/gpio.h>
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index b53fa48..28aa551 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,9 +11,104 @@
#include <plat/irqs.h>
-/* LCD */
+/* VIC0: system, DMA, timer */
+#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
+#define IRQ_BATF S5P_IRQ_VIC0(17)
+#define IRQ_MDMA S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
+#define IRQ_WDT S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
+
+/* VIC1: ARM, power, memory, connectivity */
+#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND S5P_IRQ_VIC1(7)
+#define IRQ_NFC S5P_IRQ_VIC1(8)
+#define IRQ_CFC S5P_IRQ_VIC1(9)
+#define IRQ_UART0 S5P_IRQ_VIC1(10)
+#define IRQ_UART1 S5P_IRQ_VIC1(11)
+#define IRQ_UART2 S5P_IRQ_VIC1(12)
+#define IRQ_UART3 S5P_IRQ_VIC1(13)
+#define IRQ_IIC S5P_IRQ_VIC1(14)
+#define IRQ_SPI0 S5P_IRQ_VIC1(15)
+#define IRQ_SPI1 S5P_IRQ_VIC1(16)
+#define IRQ_SPI2 S5P_IRQ_VIC1(17)
+#define IRQ_IRDA S5P_IRQ_VIC1(18)
+#define IRQ_CAN0 S5P_IRQ_VIC1(19)
+#define IRQ_CAN1 S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX S5P_IRQ_VIC1(21)
+#define IRQ_HSITX S5P_IRQ_VIC1(22)
+#define IRQ_UHOST S5P_IRQ_VIC1(23)
+#define IRQ_OTG S5P_IRQ_VIC1(24)
+#define IRQ_MSM S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
+
+/* VIC2: multimedia, audio, security */
+#define IRQ_LCD0 S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
+#define IRQ_JPEG S5P_IRQ_VIC2(8)
+#define IRQ_2D S5P_IRQ_VIC2(9)
+#define IRQ_3D S5P_IRQ_VIC2(10)
+#define IRQ_MIXER S5P_IRQ_VIC2(11)
+#define IRQ_HDMI S5P_IRQ_VIC2(12)
+#define IRQ_IIC1 S5P_IRQ_VIC2(13)
+#define IRQ_MFC S5P_IRQ_VIC2(14)
+#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 S5P_IRQ_VIC2(17)
+#define IRQ_I2S2 S5P_IRQ_VIC2(18)
+#define IRQ_AC97 S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF S5P_IRQ_VIC2(22)
+#define IRQ_ADC S5P_IRQ_VIC2(23)
+#define IRQ_PENDN S5P_IRQ_VIC2(24)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
+#define IRQ_CG S5P_IRQ_VIC2(26)
+#define IRQ_SEC S5P_IRQ_VIC2(27)
+#define IRQ_SECRX S5P_IRQ_VIC2(28)
+#define IRQ_SECTX S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
+#define IRQ_VIC_END S5P_IRQ_VIC2(31)
+
+#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
+
+#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
+
+/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
+#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
+
+/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
#define IRQ_LCD_VSYNC IRQ_LCD1
#define IRQ_LCD_SYSTEM IRQ_LCD2
-#endif /* __ASM_ARCH_IRQ_H */
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 5ff7931..8800954 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -3,9 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * Based on mach-s3c6400/include/mach/map.h
- *
- * S5PC1XX - Memory map definitions
+ * S5PC100 - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,71 +14,44 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
+#include <plat/map-s5p.h>
-/*
- * map-base.h has already defined virtual memory address
- * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s)
- * S3C_VA_SYS S3C_ADDR(0x00100000) system control
- * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used)
- * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block
- * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog
- * S3C_VA_UART S3C_ADDR(0x01000000) UART
- *
- * S5PC100 specific virtual memory address can be defined here
- * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO
- *
- */
-
-/* Chip ID */
#define S5PC100_PA_CHIPID (0xE0000000)
-#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID
-#define S5PC1XX_VA_CHIPID S3C_VA_SYS
+#define S5P_PA_CHIPID S5PC100_PA_CHIPID
-/* System */
-#define S5PC100_PA_CLK (0xE0100000)
-#define S5PC100_PA_CLK_OTHER (0xE0200000)
-#define S5PC100_PA_PWR (0xE0108000)
-#define S5PC1XX_PA_CLK S5PC100_PA_CLK
-#define S5PC1XX_PA_PWR S5PC100_PA_PWR
-#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER
-#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000)
-#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000)
-#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000)
+#define S5PC100_PA_SYSCON (0xE0100000)
+#define S5P_PA_SYSCON S5PC100_PA_SYSCON
-/* GPIO */
+#define S5PC100_PA_OTHERS (0xE0200000)
+#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
+
#define S5PC100_PA_GPIO (0xE0300000)
-#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO
-#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000)
+#define S5P_PA_GPIO S5PC100_PA_GPIO
-/* Interrupt */
-#define S5PC100_PA_VIC (0xE4000000)
-#define S5PC100_VA_VIC S3C_VA_IRQ
-#define S5PC100_PA_VIC_OFFSET 0x100000
-#define S5PC100_VA_VIC_OFFSET 0x10000
-#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
-#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_VIC0 (0xE4000000)
+#define S5P_PA_VIC0 S5PC100_PA_VIC0
-/* DMA */
-#define S5PC100_PA_MDMA (0xE8100000)
-#define S5PC100_PA_PDMA0 (0xE9000000)
-#define S5PC100_PA_PDMA1 (0xE9200000)
+#define S5PC100_PA_VIC1 (0xE4100000)
+#define S5P_PA_VIC1 S5PC100_PA_VIC1
-/* Timer */
+#define S5PC100_PA_VIC2 (0xE4200000)
+#define S5P_PA_VIC2 S5PC100_PA_VIC2
+
#define S5PC100_PA_TIMER (0xEA000000)
-#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER
-#define S5PC1XX_VA_TIMER S3C_VA_TIMER
+#define S5P_PA_TIMER S5PC100_PA_TIMER
-/* RTC */
-#define S5PC100_PA_RTC (0xEA300000)
+#define S5PC100_PA_SYSTIMER (0xEA100000)
-/* UART */
#define S5PC100_PA_UART (0xEC000000)
-#define S5PC1XX_PA_UART S5PC100_PA_UART
-#define S5PC1XX_VA_UART S3C_VA_UART
-/* I2C */
-#define S5PC100_PA_I2C (0xEC100000)
-#define S5PC100_PA_I2C1 (0xEC200000)
+#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800)
+#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00)
+#define S5P_SZ_UART SZ_256
+
+#define S5PC100_PA_IIC0 (0xEC100000)
+#define S5PC100_PA_IIC1 (0xEC200000)
/* SPI */
#define S5PC100_PA_SPI0 0xEC300000
@@ -91,65 +62,29 @@
#define S5PC100_PA_USB_HSOTG (0xED200000)
#define S5PC100_PA_USB_HSPHY (0xED300000)
-/* SD/MMC */
-#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0)
-#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1)
-#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2)
-
-/* LCD */
#define S5PC100_PA_FB (0xEE000000)
-/* Multimedia */
-#define S5PC100_PA_G2D (0xEE800000)
-#define S5PC100_PA_JPEG (0xEE500000)
-#define S5PC100_PA_ROTATOR (0xEE100000)
-#define S5PC100_PA_G3D (0xEF000000)
+#define S5PC100_PA_AC97 0xF2300000
-/* I2S */
-#define S5PC100_PA_I2S0 (0xF2000000)
-#define S5PC100_PA_I2S1 (0xF2100000)
-#define S5PC100_PA_I2S2 (0xF2200000)
+/* PCM */
+#define S5PC100_PA_PCM0 0xF2400000
+#define S5PC100_PA_PCM1 0xF2500000
/* KEYPAD */
#define S5PC100_PA_KEYPAD (0xF3100000)
-/* ADC & TouchScreen */
-#define S5PC100_PA_TSADC (0xF3000000)
+#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-/* ETC */
#define S5PC100_PA_SDRAM (0x20000000)
-#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM
+#define S5P_PA_SDRAM S5PC100_PA_SDRAM
-/* compatibility defines. */
-#define S3C_PA_RTC S5PC100_PA_RTC
+/* compatibiltiy defines. */
#define S3C_PA_UART S5PC100_PA_UART
-#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0)
-#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400)
-#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800)
-#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00)
-#define S3C_VA_UART0 (S3C_VA_UART + 0x0)
-#define S3C_VA_UART1 (S3C_VA_UART + 0x400)
-#define S3C_VA_UART2 (S3C_VA_UART + 0x800)
-#define S3C_VA_UART3 (S3C_VA_UART + 0xC00)
-#define S3C_UART_OFFSET 0x400
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_IIC S5PC100_PA_IIC0
+#define S3C_PA_IIC1 S5PC100_PA_IIC1
#define S3C_PA_FB S5PC100_PA_FB
-#define S3C_PA_G2D S5PC100_PA_G2D
-#define S3C_PA_G3D S5PC100_PA_G3D
-#define S3C_PA_JPEG S5PC100_PA_JPEG
-#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR
-#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0)
-#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
-#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC S5PC100_PA_I2C
-#define S3C_PA_IIC1 S5PC100_PA_I2C1
-#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0
-#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1
-#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2
-#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S3C_PA_TSADC S5PC100_PA_TSADC
+#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
-#endif /* __ASM_ARCH_C100_MAP_H */
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
index f2283bd..5d27d28 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
@@ -17,6 +17,8 @@
#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x))
+
#define S5P_APLL_LOCK S5P_CLKREG(0x00)
#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
@@ -68,4 +70,8 @@
#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
+#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
+
+#define S5PC100_SWRESET_RESETVAL 0xc100
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
index 6866691..dd6295e 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
@@ -12,7 +12,7 @@
#include <mach/map.h>
/* S5PC100 */
-#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO
+#define S5PC100_GPIO_BASE S5P_VA_GPIO
#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000)
#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020)
#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040)
@@ -47,24 +47,29 @@
#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360)
#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380)
#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0)
-#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00)
-#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68)
-#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80)
+#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4))
-/* PDNEN */
-#define S5PC100_PDNEN_CFG_PDNEN (1 << 1)
-#define S5PC100_PDNEN_CFG_AUTO (0 << 1)
-#define S5PC100_PDNEN_POWERDOWN (1 << 0)
-#define S5PC100_PDNEN_NORMAL (0 << 0)
+#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4))
-/* Common part */
-/* External interrupt base is same at both s5pc100 and s5pc110 */
-#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE)
+#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4))
-#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV (0x00)
+#define S5P_EXTINT_HILEV (0x01)
+#define S5P_EXTINT_FALLEDGE (0x02)
+#define S5P_EXTINT_RISEEDGE (0x03)
+#define S5P_EXTINT_BOTHEDGE (0x04)
#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
index 751ac15..4d9036d 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -3,7 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * S5PC1XX - IRQ register definitions
+ * S5PC100 - IRQ register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,9 +16,4 @@
#include <mach/map.h>
#include <asm/hardware/vic.h>
-/* interrupt controller */
-#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0))
-#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1))
-#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2))
-
#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index f0d31a2..681f626 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -3,7 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * S5PC1XX - system implementation
+ * S5PC100 - system implementation
*
* Based on mach-s3c6400/include/mach/system.h
*/
@@ -13,14 +13,11 @@
#include <linux/io.h>
#include <mach/map.h>
-#include <plat/regs-clock.h>
-
-void (*s5pc1xx_idle)(void);
+#include <mach/regs-clock.h>
static void arch_idle(void)
{
- if (s5pc1xx_idle)
- s5pc1xx_idle();
+ /* nothing here yet */
}
static void arch_reset(char mode, const char *cmd)
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index f338c9e..20f6873 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -20,8 +20,8 @@
*/
static inline u32 s3c24xx_ostimer_pending(void)
{
- u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
- return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0));
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
}
#define TICK_MAX (0xffffffff)
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/mach-s5pc100/init.c
similarity index 67%
rename from arch/arm/plat-s5pc1xx/s5pc100-init.c
rename to arch/arm/mach-s5pc100/init.c
index c587108..19d7b52 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-init.c
+++ b/arch/arm/mach-s5pc100/init.c
@@ -1,9 +1,8 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,9 +18,7 @@
#include <plat/s5pc100.h>
/* uart registration process */
-
void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
- /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */
- s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c
similarity index 72%
rename from arch/arm/plat-s5pc1xx/irq-gpio.c
rename to arch/arm/mach-s5pc100/irq-gpio.c
index fecca7a..2bf86c1 100644
--- a/arch/arm/plat-s5pc1xx/irq-gpio.c
+++ b/arch/arm/mach-s5pc100/irq-gpio.c
@@ -1,9 +1,9 @@
/*
- * arch/arm/plat-s5pc1xx/irq-gpio.c
+ * arch/arm/mach-s5pc100/irq-gpio.c
*
* Copyright (C) 2009 Samsung Electronics
*
- * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
+ * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,7 +19,7 @@
#include <mach/map.h>
#include <plat/gpio-cfg.h>
-#define S5PC1XX_GPIOREG(x) (S5PC1XX_VA_GPIO + (x))
+#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x))
#define CON_OFFSET 0x700
#define MASK_OFFSET 0x900
@@ -49,7 +49,7 @@
return group << 2;
}
-static int s5pc1xx_get_start(unsigned int group)
+static int s5pc100_get_start(unsigned int group)
{
switch (group) {
case 0: return S5PC100_GPIO_A0_START;
@@ -80,7 +80,7 @@
return -EINVAL;
}
-static int s5pc1xx_get_group(unsigned int irq)
+static int s5pc100_get_group(unsigned int irq)
{
irq -= S3C_IRQ_GPIO(0);
@@ -134,67 +134,67 @@
return -EINVAL;
}
-static int s5pc1xx_get_offset(unsigned int irq)
+static int s5pc100_get_offset(unsigned int irq)
{
struct gpio_chip *chip = get_irq_data(irq);
return irq - S3C_IRQ_GPIO(chip->base);
}
-static void s5pc1xx_gpioint_ack(unsigned int irq)
+static void s5pc100_gpioint_ack(unsigned int irq)
{
int group, offset, pend_offset;
unsigned int value;
- group = s5pc1xx_get_group(irq);
- offset = s5pc1xx_get_offset(irq);
+ group = s5pc100_get_group(irq);
+ offset = s5pc100_get_offset(irq);
pend_offset = group_to_pend_offset(group);
- value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+ value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
value |= 1 << offset;
- __raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+ __raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
}
-static void s5pc1xx_gpioint_mask(unsigned int irq)
+static void s5pc100_gpioint_mask(unsigned int irq)
{
int group, offset, mask_offset;
unsigned int value;
- group = s5pc1xx_get_group(irq);
- offset = s5pc1xx_get_offset(irq);
+ group = s5pc100_get_group(irq);
+ offset = s5pc100_get_offset(irq);
mask_offset = group_to_mask_offset(group);
- value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
value |= 1 << offset;
- __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
}
-static void s5pc1xx_gpioint_unmask(unsigned int irq)
+static void s5pc100_gpioint_unmask(unsigned int irq)
{
int group, offset, mask_offset;
unsigned int value;
- group = s5pc1xx_get_group(irq);
- offset = s5pc1xx_get_offset(irq);
+ group = s5pc100_get_group(irq);
+ offset = s5pc100_get_offset(irq);
mask_offset = group_to_mask_offset(group);
- value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
value &= ~(1 << offset);
- __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
}
-static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
+static void s5pc100_gpioint_mask_ack(unsigned int irq)
{
- s5pc1xx_gpioint_mask(irq);
- s5pc1xx_gpioint_ack(irq);
+ s5pc100_gpioint_mask(irq);
+ s5pc100_gpioint_ack(irq);
}
-static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
+static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
{
int group, offset, con_offset;
unsigned int value;
- group = s5pc1xx_get_group(irq);
- offset = s5pc1xx_get_offset(irq);
+ group = s5pc100_get_group(irq);
+ offset = s5pc100_get_offset(irq);
con_offset = group_to_con_offset(group);
switch (type) {
@@ -221,24 +221,24 @@
}
- value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+ value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
value &= ~(0xf << (offset * 0x4));
value |= (type << (offset * 0x4));
- __raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+ __raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
return 0;
}
-struct irq_chip s5pc1xx_gpioint = {
+struct irq_chip s5pc100_gpioint = {
.name = "GPIO",
- .ack = s5pc1xx_gpioint_ack,
- .mask = s5pc1xx_gpioint_mask,
- .mask_ack = s5pc1xx_gpioint_mask_ack,
- .unmask = s5pc1xx_gpioint_unmask,
- .set_type = s5pc1xx_gpioint_set_type,
+ .ack = s5pc100_gpioint_ack,
+ .mask = s5pc100_gpioint_mask,
+ .mask_ack = s5pc100_gpioint_mask_ack,
+ .unmask = s5pc100_gpioint_unmask,
+ .set_type = s5pc100_gpioint_set_type,
};
-void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
{
int group, offset, pend_offset, mask_offset;
int real_irq, group_end;
@@ -248,17 +248,17 @@
for (group = 0; group < group_end; group++) {
pend_offset = group_to_pend_offset(group);
- pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+ pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
if (!pend)
continue;
mask_offset = group_to_mask_offset(group);
- mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
pend &= ~mask;
for (offset = 0; offset < 8; offset++) {
if (pend & (1 << offset)) {
- real_irq = s5pc1xx_get_start(group) + offset;
+ real_irq = s5pc100_get_start(group) + offset;
generic_handle_irq(S3C_IRQ_GPIO(real_irq));
}
}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index bfe67db..af22f82 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -43,38 +43,48 @@
#include <plat/fb.h>
#include <plat/iic.h>
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PC100_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5PC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S3C2440_UFCON_RXTRIG8 | \
+ S3C2440_UFCON_TXTRIG16)
static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = S5PC100_UCON_DEFAULT,
+ .ulcon = S5PC100_ULCON_DEFAULT,
+ .ufcon = S5PC100_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = S5PC100_UCON_DEFAULT,
+ .ulcon = S5PC100_ULCON_DEFAULT,
+ .ufcon = S5PC100_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = S5PC100_UCON_DEFAULT,
+ .ulcon = S5PC100_ULCON_DEFAULT,
+ .ufcon = S5PC100_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = S5PC100_UCON_DEFAULT,
+ .ulcon = S5PC100_ULCON_DEFAULT,
+ .ufcon = S5PC100_UFCON_DEFAULT,
},
};
@@ -118,8 +128,7 @@
static struct s3c_fb_pd_win smdkc100_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
- .refresh = 70,
- .pixclock = (8+13+3+800)*(7+5+1+480),
+ .pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80),
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
@@ -140,8 +149,6 @@
.setup_gpio = s5pc100_fb_gpio_setup_24bpp,
};
-static struct map_desc smdkc100_iodesc[] = {};
-
static struct platform_device *smdkc100_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
@@ -150,11 +157,13 @@
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&smdkc100_lcd_powerdev,
+ &s5pc100_device_iis0,
+ &s5pc100_device_ac97,
};
static void __init smdkc100_map_io(void)
{
- s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
}
@@ -178,10 +187,9 @@
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
- .phys_io = S5PC100_PA_UART & 0xfff00000,
- .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
- .boot_params = S5PC100_PA_SDRAM + 0x100,
-
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
similarity index 94%
rename from arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
rename to arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index 185c894..7769c76 100644
--- a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -1,8 +1,8 @@
-/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
*
* Copyright 2009 Samsung Eletronics
*
- * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 7601c28..88f81ce 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -13,18 +13,61 @@
bool
select PLAT_S5P
select S3C_PL330_DMA
+ select S5P_EXT_INT
help
Enable S5PV210 CPU support
-choice
- prompt "Select machine type"
- depends on ARCH_S5PV210
- default MACH_SMDKV210
+config S5PV210_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S5PV210_SETUP_I2C2
+ bool
+ help
+ Common setup code for i2c bus 2.
+
+config S5PV210_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5PV210 with an 24bpp RGB display helper.
+
+config S5PV210_SETUP_SDHCI
+ bool
+ select S5PV210_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S5PV210 based SDHCI systems
+
+config S5PV210_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
+# machine support
+
+config MACH_AQUILA
+ bool "Samsung Aquila"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ select S5PV210_SETUP_FB_24BPP
+ select S3C_DEV_FB
+ help
+ Machine support for the Samsung Aquila target based on S5PC110 SoC
+
+config MACH_GONI
+ bool "GONI"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung GONI board
+ S5PC110(MCP) is one of package option of S5PV210
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
help
Machine support for Samsung SMDKV210
@@ -36,6 +79,4 @@
Machine support for Samsung SMDKC110
S5PC110(MCP) is one of package option of S5PV210
-endchoice
-
endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index ba0d709..6a6dea1 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -17,10 +17,18 @@
# machine support
+obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o
obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
+obj-$(CONFIG_MACH_GONI) += mach-goni.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+
+obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 2b776eb..76084d8 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -32,6 +32,8 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5pv210.h>
+#include <plat/iic-core.h>
+#include <plat/sdhci.h>
/* Initial IO mappings */
@@ -74,7 +76,19 @@
void __init s5pv210_map_io(void)
{
+ s3c_device_adc.name = "s3c64xx-adc";
+
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+
+ /* initialise device information early */
+ s5pv210_default_sdhci0();
+ s5pv210_default_sdhci1();
+ s5pv210_default_sdhci2();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
}
void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 62c5175..92fc6c7 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -17,22 +17,6 @@
/* VIC0: System, DMA, Timer */
-#define IRQ_EINT0 S5P_IRQ_VIC0(0)
-#define IRQ_EINT1 S5P_IRQ_VIC0(1)
-#define IRQ_EINT2 S5P_IRQ_VIC0(2)
-#define IRQ_EINT3 S5P_IRQ_VIC0(3)
-#define IRQ_EINT4 S5P_IRQ_VIC0(4)
-#define IRQ_EINT5 S5P_IRQ_VIC0(5)
-#define IRQ_EINT6 S5P_IRQ_VIC0(6)
-#define IRQ_EINT7 S5P_IRQ_VIC0(7)
-#define IRQ_EINT8 S5P_IRQ_VIC0(8)
-#define IRQ_EINT9 S5P_IRQ_VIC0(9)
-#define IRQ_EINT10 S5P_IRQ_VIC0(10)
-#define IRQ_EINT11 S5P_IRQ_VIC0(11)
-#define IRQ_EINT12 S5P_IRQ_VIC0(12)
-#define IRQ_EINT13 S5P_IRQ_VIC0(13)
-#define IRQ_EINT14 S5P_IRQ_VIC0(14)
-#define IRQ_EINT15 S5P_IRQ_VIC0(15)
#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
#define IRQ_BATF S5P_IRQ_VIC0(17)
#define IRQ_MDMA S5P_IRQ_VIC0(18)
@@ -134,13 +118,25 @@
#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
#define IRQ_VIC_END S5P_IRQ_VIC3(31)
-#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
+#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1)
-#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x) S5P_EINT(x)
+#define EINT_MODE S3C_GPIO_SFN(0xf)
+
+#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \
+ : ((x) + S5P_EINT_16_31_BASE))
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT(31) + 1)
+#define NR_IRQS (IRQ_EINT(31) + 1)
+
+#define EINT_GPIO_0(x) S5PV210_GPH0(x)
+#define EINT_GPIO_1(x) S5PV210_GPH1(x)
+#define EINT_GPIO_2(x) S5PV210_GPH2(x)
+#define EINT_GPIO_3(x) S5PV210_GPH3(x)
+
+/* Compatibility */
+#define IRQ_LCD_FIFO IRQ_LCD0
+#define IRQ_LCD_VSYNC IRQ_LCD1
+#define IRQ_LCD_SYSTEM IRQ_LCD2
#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 9ab0069..6fb7bfd 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -30,6 +30,8 @@
#define S5PV210_PA_SPI1 0xE1400000
#define S5PV210_PA_IIC0 (0xE1800000)
+#define S5PV210_PA_IIC1 (0xFAB00000)
+#define S5PV210_PA_IIC2 (0xE1A00000)
#define S5PV210_PA_TIMER (0xE2500000)
#define S5P_PA_TIMER S5PV210_PA_TIMER
@@ -51,6 +53,10 @@
#define S5PV210_PA_PDMA0 0xE0900000
#define S5PV210_PA_PDMA1 0xE0A00000
+#define S5PV210_PA_FB (0xF8000000)
+
+#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
+
#define S5PV210_PA_VIC0 (0xF2000000)
#define S5P_PA_VIC0 S5PV210_PA_VIC0
@@ -79,8 +85,18 @@
/* AC97 */
#define S5PV210_PA_AC97 0xE2200000
+#define S5PV210_PA_ADC (0xE1700000)
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV210_PA_UART
+#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
#define S3C_PA_IIC S5PV210_PA_IIC0
+#define S3C_PA_IIC1 S5PV210_PA_IIC1
+#define S3C_PA_IIC2 S5PV210_PA_IIC2
+#define S3C_PA_FB S5PV210_PA_FB
+
+#define SAMSUNG_PA_ADC S5PV210_PA_ADC
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index e56e0e4..2a25ab40 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -126,6 +126,7 @@
#define S5P_RST_STAT S5P_CLKREG(0xA000)
#define S5P_OSC_CON S5P_CLKREG(0x8000)
+#define S5P_MDNIE_SEL S5P_CLKREG(0x7008)
#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200)
#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204)
#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
new file mode 100644
index 0000000..6d06809
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV210 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PV210_EINT30CON (S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x) (S5PV210_EINT30CON + ((x) * 0x4))
+
+#define S5PV210_EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x) (S5PV210_EINT30FLTCON0 + ((x) * 0x4))
+
+#define S5PV210_EINT30MASK (S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x) (S5PV210_EINT30MASK + ((x) * 0x4))
+
+#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4))
+
+#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \
+ : ((irq) - S5P_EINT_16_31_BASE))
+
+#define EINT_REG_NR(x) (eint_offset(x) >> 3)
+
+#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV (0x00)
+#define S5P_EXTINT_HILEV (0x01)
+#define S5P_EXTINT_FALLEDGE (0x02)
+#define S5P_EXTINT_RISEEDGE (0x03)
+#define S5P_EXTINT_BOTHEDGE (0x04)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
new file mode 100644
index 0000000..10bc76e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/mach-s5pv210/mach-aquila.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/fb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/fb.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win aquila_fb_win0 = {
+ .win_mode = {
+ .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 3,
+ .lower_margin = 28,
+ .hsync_len = 2,
+ .vsync_len = 2,
+ .xres = 480,
+ .yres = 800,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_pd_win aquila_fb_win1 = {
+ .win_mode = {
+ .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 3,
+ .lower_margin = 28,
+ .hsync_len = 2,
+ .vsync_len = 2,
+ .xres = 480,
+ .yres = 800,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
+ .win[0] = &aquila_fb_win0,
+ .win[1] = &aquila_fb_win1,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+ VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
+ .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
+};
+
+static struct platform_device *aquila_devices[] __initdata = {
+ &s3c_device_fb,
+};
+
+static void __init aquila_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init aquila_machine_init(void)
+{
+ /* FB */
+ s3c_fb_set_platdata(&aquila_lcd_pdata);
+
+ platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
+}
+
+MACHINE_START(AQUILA, "Aquila")
+ /* Maintainers:
+ Marek Szyprowski <m.szyprowski@samsung.com>
+ Kyungmin Park <kyungmin.park@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv210_init_irq,
+ .map_io = aquila_map_io,
+ .init_machine = aquila_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
new file mode 100644
index 0000000..4863b13
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-goni.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *goni_devices[] __initdata = {
+};
+
+static void __init goni_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
+}
+
+static void __init goni_machine_init(void)
+{
+ platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
+}
+
+MACHINE_START(GONI, "GONI")
+ /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv210_init_irq,
+ .map_io = goni_map_io,
+ .init_machine = goni_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 3c29e18..b92beb6 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -25,6 +25,8 @@
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -74,6 +76,14 @@
static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
+ &s3c_device_adc,
+ &s3c_device_ts,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
};
static void __init smdkv210_map_io(void)
@@ -85,6 +95,7 @@
static void __init smdkv210_machine_init(void)
{
+ s3c24xx_ts_set_platdata(&s3c_ts_platform);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
new file mode 100644
index 0000000..a50cbac
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Base s5pv210 setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s5pv210_fb_gpio_setup_24bpp(void)
+{
+ unsigned int gpio = 0;
+
+ for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ /* Set DISPLAY_CONTROL register for Display path selection.
+ *
+ * ouput | RGB | I80 | ITU
+ * -----------------------------------
+ * 00 | MIE | FIMD | FIMD
+ * 01 | MDNIE | MDNIE | FIMD
+ * 10 | FIMD | FIMD | FIMD
+ * 11 | FIMD | FIMD | FIMD
+ */
+ writel(0x2, S5P_MDNIE_SEL);
+}
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index 9ec6845..c718253c 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
*
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* I2C0 GPIO configuration.
@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
+#include <mach/gpio.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- /* Will be populated later */
+ s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
new file mode 100644
index 0000000..45e0e6e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c1.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
new file mode 100644
index 0000000..b11b4bf
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C2 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
new file mode 100644
index 0000000..fe7d86d
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -0,0 +1,104 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+
+ /* Set all the necessary GPG0/GPG1 pins to special-function 2 */
+ for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+ switch (width) {
+ case 8:
+ /* GPG1[3:6] special-funtion 3 */
+ for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+ case 4:
+ /* GPG0[3:6] special-funtion 2 */
+ for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+ default:
+ break;
+ }
+
+ s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+}
+
+void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+
+ /* Set all the necessary GPG1[0:1] pins to special-function 2 */
+ for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ /* Data pin GPG1[3:6] to special-function 2 */
+ for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+
+ /* Set all the necessary GPG2[0:1] pins to special-function 2 */
+ for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ switch (width) {
+ case 8:
+ /* Data pin GPG3[3:6] to special-function 3 */
+ for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+ case 4:
+ /* Data pin GPG2[3:6] to special-function 2 */
+ for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+ default:
+ break;
+ }
+
+ s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
new file mode 100644
index 0000000..51815ec
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s5pv210/setup-sdhci.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pv210_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc", /* HCLK */
+ [1] = "hsmmc", /* HCLK */
+ [2] = "sclk_mmc", /* mmc_bus */
+ /*[4] = reserved */
+};
+
+void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ /* don't need to alter anything acording to card-type */
+
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 92bd756..5cb2dd1 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,7 +7,7 @@
config PLAT_S5P
bool
- depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
+ depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
default y
select ARM_VIC
select NO_IOPORT
@@ -24,3 +24,8 @@
select SAMSUNG_IRQ_UART
help
Base platform code for Samsung's S5P series SoC.
+
+config S5P_EXT_INT
+ bool
+ help
+ Use the external interrupts (other than GPIO interrupts.)
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 0ec09a9..25941a5 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -16,3 +16,5 @@
obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
+obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
+obj-y += setup-i2c0.o
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index f92e5de..75cb8c3 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -19,12 +19,14 @@
#include <plat/cpu.h>
#include <plat/s5p6440.h>
#include <plat/s5p6442.h>
+#include <plat/s5pc100.h>
#include <plat/s5pv210.h>
/* table of supported CPUs */
static const char name_s5p6440[] = "S5P6440";
static const char name_s5p6442[] = "S5P6442";
+static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static struct cpu_table cpu_ids[] __initdata = {
@@ -45,6 +47,14 @@
.init = s5p6442_init,
.name = name_s5p6442,
}, {
+ .idcode = 0x43100000,
+ .idmask = 0xfffff000,
+ .map_io = s5pc100_map_io,
+ .init_clocks = s5pc100_init_clocks,
+ .init_uarts = s5pc100_init_uarts,
+ .init = s5pc100_init,
+ .name = name_s5pc100,
+ }, {
.idcode = 0x43110000,
.idmask = 0xfffff000,
.map_io = s5pv210_map_io,
diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-s5p/include/plat/s5pc100.h
new file mode 100644
index 0000000..5f6099d
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pc100.h
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5pc100.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern int s5pc100_init(void);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
new file mode 100644
index 0000000..eaa70aa
--- /dev/null
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -0,0 +1,213 @@
+/* linux/arch/arm/plat-s5p/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+
+static inline void s5p_irq_eint_mask(unsigned int irq)
+{
+ u32 mask;
+
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+ mask |= eint_irq_to_bit(irq);
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_unmask(unsigned int irq)
+{
+ u32 mask;
+
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+ mask &= ~(eint_irq_to_bit(irq));
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static inline void s5p_irq_eint_ack(unsigned int irq)
+{
+ __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_maskack(unsigned int irq)
+{
+ /* compiler should in-line these */
+ s5p_irq_eint_mask(irq);
+ s5p_irq_eint_ack(irq);
+}
+
+static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+ int offs = eint_offset(irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S5P_EXTINT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S5P_EXTINT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S5P_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S5P_EXTINT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S5P_EXTINT_HILEV;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs & 0x7) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+
+ if ((0 <= offs) && (offs < 8))
+ s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+
+ else if ((8 <= offs) && (offs < 16))
+ s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+
+ else if ((16 <= offs) && (offs < 24))
+ s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+
+ else if ((24 <= offs) && (offs < 32))
+ s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+
+ else
+ printk(KERN_ERR "No such irq number %d", offs);
+
+ return 0;
+}
+
+static struct irq_chip s5p_irq_eint = {
+ .name = "s5p-eint",
+ .mask = s5p_irq_eint_mask,
+ .unmask = s5p_irq_eint_unmask,
+ .mask_ack = s5p_irq_eint_maskack,
+ .ack = s5p_irq_eint_ack,
+ .set_type = s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .set_wake = s3c_irqext_wake,
+#endif
+};
+
+/* s5p_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from EINTs 16 to 31. It is designed to be inlined into the specific
+ * handler s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5p_irq_demux_eint(unsigned int start)
+{
+ u32 status;
+ u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+ unsigned int irq;
+
+ status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+ status &= ~mask;
+ status &= 0xff;
+
+ while (status) {
+ irq = fls(status);
+ generic_handle_irq(irq - 1 + start);
+ status &= ~(1 << irq);
+ }
+}
+
+static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ s5p_irq_demux_eint(IRQ_EINT(16));
+ s5p_irq_demux_eint(IRQ_EINT(24));
+}
+
+static inline void s5p_irq_vic_eint_mask(unsigned int irq)
+{
+ s5p_irq_eint_mask(irq);
+}
+
+static void s5p_irq_vic_eint_unmask(unsigned int irq)
+{
+ s5p_irq_eint_unmask(irq);
+}
+
+static inline void s5p_irq_vic_eint_ack(unsigned int irq)
+{
+ __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_vic_eint_maskack(unsigned int irq)
+{
+ s5p_irq_vic_eint_mask(irq);
+ s5p_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s5p_irq_vic_eint = {
+ .name = "s5p_vic_eint",
+ .mask = s5p_irq_vic_eint_mask,
+ .unmask = s5p_irq_vic_eint_unmask,
+ .mask_ack = s5p_irq_vic_eint_maskack,
+ .ack = s5p_irq_vic_eint_ack,
+ .set_type = s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .set_wake = s3c_irqext_wake,
+#endif
+};
+
+int __init s5p_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
+ set_irq_chip(irq, &s5p_irq_vic_eint);
+
+ for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+ set_irq_chip(irq, &s5p_irq_eint);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
+ return 0;
+}
+
+arch_initcall(s5p_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
deleted file mode 100644
index c7bd2bb..0000000
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-# Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-config PLAT_S5PC1XX
- bool
- depends on ARCH_S5PC1XX
- default y
- select PLAT_S3C
- select ARM_VIC
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_UART
- select SAMSUNG_IRQ_VIC_TIMER
- select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S5P_GPIO_DRVSTR
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
- select SAMSUNG_GPIOLIB_4BIT
- help
- Base platform code for any Samsung S5PC1XX device
-
-if PLAT_S5PC1XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S5PC100_INIT
- bool
- help
- Common initialisation code for the S5PC1XX
-
-config CPU_S5PC100_CLOCK
- bool
- help
- Common clock support code for the S5PC1XX
-
-# platform specific device setup
-
-config S5PC1XX_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
deleted file mode 100644
index 9ce6409..0000000
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-# arch/arm/plat-s5pc1xx/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += dev-uart.o
-obj-y += cpu.o
-obj-y += irq.o
-obj-y += clock.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o
-obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
-
-# Device setup
-
-obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
deleted file mode 100644
index 387f231..0000000
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ /dev/null
@@ -1,709 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/clock.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * S5PC1XX Base clock support
- *
- * Based on plat-s3c64xx/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-clock.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S5PC100_CLKSRC1);
- if (enable)
- val |= S5PC100_CLKSRC1_CLK48M_MASK;
- else
- val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
- __raw_writel(val, S5PC100_CLKSRC1);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
- .name = "clk_54m",
- .id = -1,
- .rate = 54000000,
-};
-
-struct clk clk_hd0 = {
- .name = "hclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-struct clk clk_pd0 = {
- .name = "pclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk s5pc100_init_clocks_disable[] = {
- {
- .name = "dsi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_DSI,
- }, {
- .name = "csi",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_CSI,
- }, {
- .name = "ccan",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
- }, {
- .name = "ccan",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
- }, {
- .name = "keypad",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
- }, {
- .name = "hclkd2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
- }, {
- .name = "iis-d2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
- },
-};
-
-static struct clk s5pc100_init_clocks[] = {
- /* System1 (D0_0) devices */
- {
- .name = "intc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_INTC,
- }, {
- .name = "tzic",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
- }, {
- .name = "cf-ata",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
- }, {
- .name = "mdma",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
- }, {
- .name = "g2d",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_G2D,
- }, {
- .name = "secss",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
- }, {
- .name = "cssys",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
- },
-
- /* Memory (D0_1) devices */
- {
- .name = "dmc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_DMC,
- }, {
- .name = "sromc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
- }, {
- .name = "onenand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
- }, {
- .name = "nand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
- }, {
- .name = "intmem",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
- }, {
- .name = "ebi",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_EBI,
- },
-
- /* System2 (D0_2) devices */
- {
- .name = "seckey",
- .id = -1,
- .parent = &clk_pd0,
- .enable = s5pc100_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
- }, {
- .name = "sdm",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc100_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SDM,
- },
-
- /* File (D1_0) devices */
- {
- .name = "pdma",
- .id = 0,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
- }, {
- .name = "pdma",
- .id = 1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
- }, {
- .name = "otg",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
- }, {
- .name = "modem",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
- }, {
- .name = "hsmmc",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
- }, {
- .name = "hsmmc",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
- }, {
- .name = "hsmmc",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
- },
-
- /* Multimedia1 (D1_1) devices */
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_LCD,
- }, {
- .name = "rotator",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
- }, {
- .name = "fimc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
- }, {
- .name = "jpeg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
- }, {
- .name = "g3d",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_G3D,
- },
-
- /* Multimedia2 (D1_2) devices */
- {
- .name = "tv",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_TV,
- }, {
- .name = "vp",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_VP,
- }, {
- .name = "mixer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
- }, {
- .name = "hdmi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
- }, {
- .name = "mfc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MFC,
- },
-
- /* System (D1_3) devices */
- {
- .name = "chipid",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
- }, {
- .name = "apc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_APC,
- }, {
- .name = "iec",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_IEC,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_PWM,
- }, {
- .name = "systimer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_WDT,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_RTC,
- },
-
- /* Connectivity (D1_4) devices */
- {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART3,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IIC,
- }, {
- .name = "hdmi-i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
- }, {
- .name = "spi",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
- }, {
- .name = "spi",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
- }, {
- .name = "spi",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
- }, {
- .name = "irda",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
- }, {
- .name = "hsitx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
- }, {
- .name = "hsirx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
- },
-
- /* Audio (D1_5) devices */
- {
- .name = "iis",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
- }, {
- .name = "iis",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
- }, {
- .name = "iis",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_AC97,
- }, {
- .name = "pcm",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
- }, {
- .name = "pcm",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
- }, {
- .name = "spdif",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
- }, {
- .name = "cg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc100_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_CG,
- },
-
- /* Audio (D2_0) devices: all disabled */
-
- /* Special Clocks 0 */
- {
- .name = "sclk_hpm",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM,
- }, {
- .name = "sclk_onenand",
- .id = -1,
- .parent = NULL,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
- }, {
- .name = "spi_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
- }, {
- .name = "spi_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
- }, {
- .name = "spi_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
- }, {
- .name = "mmc_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
- }, {
- .name = "mmc_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
- }, {
- .name = "mmc_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
- },
- /* Special Clocks 1 */
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_pd0,
- &clk_hd0,
- &clk_27m,
- &clk_48m,
- &clk_54m,
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
- int size;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clocks(s5pc100_init_clocks,
- ARRAY_SIZE(s5pc100_init_clocks));
-
- clkp = s5pc100_init_clocks_disable;
- size = ARRAY_SIZE(s5pc100_init_clocks_disable);
-
- for (ptr = 0; ptr < size; ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- (clkp->enable)(clkp, 0);
- }
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
deleted file mode 100644
index 02baeaa..0000000
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/cpu.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX CPU Support
- *
- * Based on plat-s3c64xx/cpu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s5pc100.h>
-
-/* table of supported CPUs */
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = 0x43100000,
- .idmask = 0xfffff000,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- },
-};
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xffff)
-
-static struct map_desc s5pc1xx_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_GPIO,
- .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_CHIPID,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
- .length = SZ_16,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_CLK,
- .pfn = __phys_to_pfn(S5PC1XX_PA_CLK),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_PWR,
- .pfn = __phys_to_pfn(S5PC1XX_PA_PWR),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)(S5PC1XX_VA_UART),
- .pfn = __phys_to_pfn(S5PC1XX_PA_UART),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(0),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(1),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_VIC(2),
- .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC1XX_VA_TIMER,
- .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER),
- .length = SZ_256,
- .type = MT_DEVICE,
- },
-};
-
-/* read cpu identification code */
-
-void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
-{
- unsigned long idcode;
-
- /* initialise the io descriptors we need for initialisation */
- iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
- iotable_init(mach_desc, size);
-
- idcode = __raw_readl(S5PC1XX_VA_CHIPID);
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
deleted file mode 100644
index 586c95c..0000000
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on plat-s3c64xx/dev-uart.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s5pc1xx_uart0_resource[] = {
- [0] = {
- .start = S3C_PA_UART0,
- .end = S3C_PA_UART0 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_RX0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX0,
- .end = IRQ_S3CUART_TX0,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s5pc1xx_uart1_resource[] = {
- [0] = {
- .start = S3C_PA_UART1,
- .end = S3C_PA_UART1 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX1,
- .end = IRQ_S3CUART_TX1,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5pc1xx_uart2_resource[] = {
- [0] = {
- .start = S3C_PA_UART2,
- .end = S3C_PA_UART2 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX2,
- .end = IRQ_S3CUART_TX2,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource s5pc1xx_uart3_resource[] = {
- [0] = {
- .start = S3C_PA_UART3,
- .end = S3C_PA_UART3 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX3,
- .end = IRQ_S3CUART_TX3,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR3,
- .end = IRQ_S3CUART_ERR3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-
-struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
- [0] = {
- .resources = s5pc1xx_uart0_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
- },
- [1] = {
- .resources = s5pc1xx_uart1_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
- },
- [2] = {
- .resources = s5pc1xx_uart2_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
- },
- [3] = {
- .resources = s5pc1xx_uart3_resource,
- .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
- },
-};
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
deleted file mode 100644
index 33ad267..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * External Interrupt (GPH0 ~ GPH3) control register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0)
-#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4)
-#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8)
-#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC)
-#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80)
-#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84)
-#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88)
-#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C)
-#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90)
-#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94)
-#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98)
-#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C)
-#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100)
-#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104)
-#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108)
-#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C)
-#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140)
-#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144)
-#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148)
-#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C)
-#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_LOWLEV (0x00)
-#define S5PC1XX_WKUP_INT_HILEV (0x01)
-#define S5PC1XX_WKUP_INT_FALLEDGE (0x02)
-#define S5PC1XX_WKUP_INT_RISEEDGE (0x03)
-#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
deleted file mode 100644
index 409c8043..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Common IRQ support
- *
- * Based on plat-s3c64xx/include/plat/irqs.h
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
-#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET (32)
-
-#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE S3C_IRQ(0)
-#define S3C_VIC1_BASE S3C_IRQ(32)
-#define S3C_VIC2_BASE S3C_IRQ(64)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0 (16)
-#define IRQ_S3CUART_BASE1 (20)
-#define IRQ_S3CUART_BASE2 (24)
-#define IRQ_S3CUART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-#define UART_IRQ_MODEM (3)
-
-#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
-#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
-#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x))
-
-/*
- * VIC0: system, DMA, timer
- */
-#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0)
-#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1)
-#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2)
-#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3)
-#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4)
-#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5)
-#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6)
-#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7)
-#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8)
-#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9)
-#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10)
-#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11)
-#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12)
-#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13)
-#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14)
-#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15)
-#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16)
-#define IRQ_BATF S5PC1XX_IRQ_VIC0(17)
-#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
-#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
-#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
-#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30)
-
-/*
- * VIC1: ARM, power, memory, connectivity
- */
-#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0)
-#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1)
-#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2)
-#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3)
-#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4)
-#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5)
-#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6)
-#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7)
-#define IRQ_NFC S5PC1XX_IRQ_VIC1(8)
-#define IRQ_CFC S5PC1XX_IRQ_VIC1(9)
-#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10)
-#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11)
-#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12)
-#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13)
-#define IRQ_IIC S5PC1XX_IRQ_VIC1(14)
-#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15)
-#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16)
-#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17)
-#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18)
-#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19)
-#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20)
-#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21)
-#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22)
-#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23)
-#define IRQ_OTG S5PC1XX_IRQ_VIC1(24)
-#define IRQ_MSM S5PC1XX_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28)
-#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29)
-#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30)
-
-/*
- * VIC2: multimedia, audio, security
- */
-#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0)
-#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1)
-#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2)
-#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7)
-#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8)
-#define IRQ_2D S5PC1XX_IRQ_VIC2(9)
-#define IRQ_3D S5PC1XX_IRQ_VIC2(10)
-#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11)
-#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12)
-#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13)
-#define IRQ_MFC S5PC1XX_IRQ_VIC2(14)
-#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15)
-#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16)
-#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17)
-#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18)
-#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19)
-#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20)
-#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21)
-#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22)
-#define IRQ_ADC S5PC1XX_IRQ_VIC2(23)
-#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25)
-#define IRQ_CG S5PC1XX_IRQ_VIC2(26)
-#define IRQ_SEC S5PC1XX_IRQ_VIC2(27)
-#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28)
-#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29)
-#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
-#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
-
-#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x))
-#define IRQ_TIMER0 IRQ_TIMER(0)
-#define IRQ_TIMER1 IRQ_TIMER(1)
-#define IRQ_TIMER2 IRQ_TIMER(2)
-#define IRQ_TIMER3 IRQ_TIMER(3)
-#define IRQ_TIMER4 IRQ_TIMER(4)
-
-/* External interrupt */
-#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6)
-
-#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16))
-#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
-#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-
-/* GPIO interrupt */
-#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
-
-/*
- * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
- */
-#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
-
-#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
-
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
deleted file mode 100644
index 21afef1..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/pll.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/pll.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX PLL code
- *
- * Based on plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
-#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
-#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
-#define S5P_PLL_MDIV_SHIFT (16)
-#define S5P_PLL_PDIV_SHIFT (8)
-#define S5P_PLL_SDIV_SHIFT (0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
- u32 pllcon)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
- pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
- sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
deleted file mode 100644
index 24dec4e..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x))
-#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x))
-
-/* s5pc100 register for clock */
-#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00)
-#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04)
-#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C)
-
-#define S5PC100_APLL_CON S5PC100_CLKREG(0x100)
-#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104)
-#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108)
-#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C)
-
-#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200)
-#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204)
-#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208)
-#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C)
-
-#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300)
-#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304)
-#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308)
-#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C)
-#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560)
-#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564)
-
-/* EPLL_CON */
-#define S5PC100_EPLL_EN (1<<31)
-#define S5PC100_EPLL_MASK 0xffffffff
-#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
-#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
-#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
-
-/* CLKDIV0 */
-#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0)
-#define S5PC100_CLKDIV0_APLL_SHIFT (0)
-#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
-#define S5PC100_CLKDIV0_ARM_SHIFT (4)
-#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
-#define S5PC100_CLKDIV0_D0_SHIFT (8)
-#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12)
-#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12)
-#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
-#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
-
-/* CLKDIV1 (OneNAND clock only used in one place, removed) */
-#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0)
-#define S5PC100_CLKDIV1_APLL2_SHIFT (0)
-#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
-#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
-#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
-#define S5PC100_CLKDIV1_MPLL2_SHIFT (8)
-#define S5PC100_CLKDIV1_D1_MASK (0x7<<12)
-#define S5PC100_CLKDIV1_D1_SHIFT (12)
-#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
-#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
-#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
-#define S5PC100_CLKDIV1_CAM_SHIFT (24)
-
-/* CLKDIV2 => removed in clksrc update */
-/* CLKDIV3 => removed in clksrc update, or not needed */
-/* CLKDIV4 => removed in clksrc update, or not needed */
-
-/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D00_INTC (1<<0)
-#define S5PC100_CLKGATE_D00_TZIC (1<<1)
-#define S5PC100_CLKGATE_D00_CFCON (1<<2)
-#define S5PC100_CLKGATE_D00_MDMA (1<<3)
-#define S5PC100_CLKGATE_D00_G2D (1<<4)
-#define S5PC100_CLKGATE_D00_SECSS (1<<5)
-#define S5PC100_CLKGATE_D00_CSSYS (1<<6)
-
-/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D01_DMC (1<<0)
-#define S5PC100_CLKGATE_D01_SROMC (1<<1)
-#define S5PC100_CLKGATE_D01_ONENAND (1<<2)
-#define S5PC100_CLKGATE_D01_NFCON (1<<3)
-#define S5PC100_CLKGATE_D01_INTMEM (1<<4)
-#define S5PC100_CLKGATE_D01_EBI (1<<5)
-
-/* PCLKD0 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D02_SECKEY (1<<1)
-#define S5PC100_CLKGATE_D02_SDM (1<<2)
-
-/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D10_PDMA0 (1<<0)
-#define S5PC100_CLKGATE_D10_PDMA1 (1<<1)
-#define S5PC100_CLKGATE_D10_USBHOST (1<<2)
-#define S5PC100_CLKGATE_D10_USBOTG (1<<3)
-#define S5PC100_CLKGATE_D10_MODEMIF (1<<4)
-#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5)
-#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6)
-#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7)
-
-/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D11_LCD (1<<0)
-#define S5PC100_CLKGATE_D11_ROTATOR (1<<1)
-#define S5PC100_CLKGATE_D11_FIMC0 (1<<2)
-#define S5PC100_CLKGATE_D11_FIMC1 (1<<3)
-#define S5PC100_CLKGATE_D11_FIMC2 (1<<4)
-#define S5PC100_CLKGATE_D11_JPEG (1<<5)
-#define S5PC100_CLKGATE_D11_DSI (1<<6)
-#define S5PC100_CLKGATE_D11_CSI (1<<7)
-#define S5PC100_CLKGATE_D11_G3D (1<<8)
-
-/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D12_TV (1<<0)
-#define S5PC100_CLKGATE_D12_VP (1<<1)
-#define S5PC100_CLKGATE_D12_MIXER (1<<2)
-#define S5PC100_CLKGATE_D12_HDMI (1<<3)
-#define S5PC100_CLKGATE_D12_MFC (1<<4)
-
-/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
-#define S5PC100_CLKGATE_D13_CHIPID (1<<0)
-#define S5PC100_CLKGATE_D13_GPIO (1<<1)
-#define S5PC100_CLKGATE_D13_APC (1<<2)
-#define S5PC100_CLKGATE_D13_IEC (1<<3)
-#define S5PC100_CLKGATE_D13_PWM (1<<6)
-#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7)
-#define S5PC100_CLKGATE_D13_WDT (1<<8)
-#define S5PC100_CLKGATE_D13_RTC (1<<9)
-
-/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
-#define S5PC100_CLKGATE_D14_UART0 (1<<0)
-#define S5PC100_CLKGATE_D14_UART1 (1<<1)
-#define S5PC100_CLKGATE_D14_UART2 (1<<2)
-#define S5PC100_CLKGATE_D14_UART3 (1<<3)
-#define S5PC100_CLKGATE_D14_IIC (1<<4)
-#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5)
-#define S5PC100_CLKGATE_D14_SPI0 (1<<6)
-#define S5PC100_CLKGATE_D14_SPI1 (1<<7)
-#define S5PC100_CLKGATE_D14_SPI2 (1<<8)
-#define S5PC100_CLKGATE_D14_IRDA (1<<9)
-#define S5PC100_CLKGATE_D14_CCAN0 (1<<10)
-#define S5PC100_CLKGATE_D14_CCAN1 (1<<11)
-#define S5PC100_CLKGATE_D14_HSITX (1<<12)
-#define S5PC100_CLKGATE_D14_HSIRX (1<<13)
-
-/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
-#define S5PC100_CLKGATE_D15_IIS0 (1<<0)
-#define S5PC100_CLKGATE_D15_IIS1 (1<<1)
-#define S5PC100_CLKGATE_D15_IIS2 (1<<2)
-#define S5PC100_CLKGATE_D15_AC97 (1<<3)
-#define S5PC100_CLKGATE_D15_PCM0 (1<<4)
-#define S5PC100_CLKGATE_D15_PCM1 (1<<5)
-#define S5PC100_CLKGATE_D15_SPDIF (1<<6)
-#define S5PC100_CLKGATE_D15_TSADC (1<<7)
-#define S5PC100_CLKGATE_D15_KEYIF (1<<8)
-#define S5PC100_CLKGATE_D15_CG (1<<9)
-
-/* HCLKD2 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0)
-#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
-
-/* Special Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_SCLK0_HPM (1<<0)
-#define S5PC100_CLKGATE_SCLK0_PWI (1<<1)
-#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
-#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
-#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
-#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5)
-#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6)
-#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7)
-#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8)
-#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9)
-#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10)
-#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11)
-#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12)
-#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13)
-#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14)
-#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15)
-#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16)
-#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17)
-
-/* Special Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_SCLK1_LCD (1<<0)
-#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1)
-#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2)
-#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3)
-#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4)
-#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5)
-#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6)
-#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7)
-#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8)
-#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9)
-#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10)
-#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
-#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
-
-#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000)
-#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008)
-#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100)
-#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104)
-#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200)
-#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300)
-#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304)
-#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308)
-#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400)
-#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414)
-#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420)
-
-#define S5PC100_SWRESET_RESETVAL 0xc100
-#define S5PC100_OTHER_SYS_INT 24
-#define S5PC100_OTHER_STA_TYPE 23
-#define STA_TYPE_EXPON 0
-#define STA_TYPE_SFR 1
-
-#define S5PC100_SLEEP_CFG_OSC_EN 0
-
-/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
-#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
-
-/* MIPI D-PHY Control Register 0 */
-#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1)
-#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0)
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
deleted file mode 100644
index 02ffa49..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Jongse Won <jongse.won@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x))
-
-/* s5pc100 (0xE0108000) register for power management */
-#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0)
-#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4)
-#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10)
-#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14)
-#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18)
-#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C)
-#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100)
-#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104)
-#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108)
-#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110)
-#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114)
-#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200)
-#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300)
-#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304)
-#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308)
-#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400)
-#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404)
-#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408)
-#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C)
-#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410)
-#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414)
-#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418)
-#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C)
-#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500)
-#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504)
-#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508)
-#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C)
-#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510)
-#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514)
-#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518)
-#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C)
-#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520)
-#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600)
-#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604)
-#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608)
-#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C)
-#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610)
-#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614)
-#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618)
-#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C)
-#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620)
-#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700)
-#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704)
-#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708)
-#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C)
-#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710)
-#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714)
-#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718)
-#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C)
-#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724)
-
-/* PWR_CFG */
-#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31)
-#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5)
-
-/* SLEEP_CFG */
-#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0)
-
-/* OTHERS */
-#define S5PC100_PMU_INT_DISABLE (1 << 24)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
deleted file mode 100644
index 2531f34..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Header file for s5pc100 cpu support
- *
- * Based on plat-s3c64xx/include/plat/s3c6400.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-extern int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern int s5pc100_register_baseclocks(unsigned long xtal);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-extern struct sysdev_class s5pc100_sysclass;
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
-extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
-extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
-extern struct clk clk_hpll;
-extern struct clk clk_hd0;
-extern struct clk clk_pd0;
-extern struct clk clk_54m;
-extern void s5pc1xx_register_clocks(void);
-extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
-extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
-extern struct platform_device s3c_device_g2d;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_vpp;
-extern struct platform_device s3c_device_tvenc;
-extern struct platform_device s3c_device_tvscaler;
-extern struct platform_device s3c_device_rotator;
-extern struct platform_device s3c_device_jpeg;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_usb_otghcd;
-extern struct platform_device s3c_device_keypad;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_smc911x;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_mfc;
-extern struct platform_device s3c_device_ac97;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_fimc2;
-
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
deleted file mode 100644
index 373122f..0000000
--- a/arch/arm/plat-s5pc1xx/irq-eint.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc1xx/irq-eint.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- * Kyungin Park <kyungmin.park@samsung.com>
- *
- * Based on plat-s3c64xx/irq-eint.c
- *
- * S5PC1XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-ext.h>
-#include <plat/pm.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-irqtype.h>
-
-/*
- * bank is a group of external interrupt
- * bank0 means EINT0 ... EINT7
- * bank1 means EINT8 ... EINT15
- * bank2 means EINT16 ... EINT23
- * bank3 means EINT24 ... EINT31
- */
-
-static inline int s3c_get_eint(unsigned int irq)
-{
- int real;
-
- if (irq < IRQ_EINT16_31)
- real = (irq - IRQ_EINT0);
- else
- real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
-
- return real;
-}
-
-static inline int s3c_get_bank(unsigned int irq)
-{
- return s3c_get_eint(irq) >> 3;
-}
-
-static inline int s3c_eint_to_bit(unsigned int irq)
-{
- int real, bit;
-
- real = s3c_get_eint(irq);
- bit = 1 << (real & (8 - 1));
-
- return bit;
-}
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
- u32 mask;
- u32 bank = s3c_get_bank(irq);
-
- mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
- mask |= s3c_eint_to_bit(irq);
- __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
- u32 mask;
- u32 bank = s3c_get_bank(irq);
-
- mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
- mask &= ~(s3c_eint_to_bit(irq));
- __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
- u32 bank = s3c_get_bank(irq);
-
- __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
- /* compiler should in-line these */
- s3c_irq_eint_mask(irq);
- s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
- u32 bank = s3c_get_bank(irq);
- int real = s3c_get_eint(irq);
- int gpio, shift, sfn;
- u32 ctrl, con = 0;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- con = S5PC1XX_WKUP_INT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- con = S5PC1XX_WKUP_INT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- con = S5PC1XX_WKUP_INT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- con = S5PC1XX_WKUP_INT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- con = S5PC1XX_WKUP_INT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- gpio = real & (8 - 1);
- shift = gpio << 2;
-
- ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
- ctrl &= ~(0x7 << shift);
- ctrl |= con << shift;
- __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
-
- switch (real) {
- case 0 ... 7:
- gpio = S5PC100_GPH0(gpio);
- break;
- case 8 ... 15:
- gpio = S5PC100_GPH1(gpio);
- break;
- case 16 ... 23:
- gpio = S5PC100_GPH2(gpio);
- break;
- case 24 ... 31:
- gpio = S5PC100_GPH3(gpio);
- break;
- default:
- return -EINVAL;
- }
-
- sfn = S3C_GPIO_SFN(0x2);
- s3c_gpio_cfgpin(gpio, sfn);
-
- return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
- .name = "EINT",
- .mask = s3c_irq_eint_mask,
- .unmask = s3c_irq_eint_unmask,
- .mask_ack = s3c_irq_eint_maskack,
- .ack = s3c_irq_eint_ack,
- .set_type = s3c_irq_eint_set_type,
- .set_wake = s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from external interrupts,
- * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
- u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
- unsigned int irq;
-
- status &= ~mask;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
-
- status >>= 1;
- }
-}
-
-static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_eint(16, 23);
- s3c_irq_demux_eint(24, 31);
-}
-
-/*
- * Handle EINT0 ... EINT15 at VIC directly
- */
-static void s3c_irq_vic_eint_mask(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- unsigned int real;
-
- s3c_irq_eint_mask(irq);
- real = s3c_get_eint(irq);
- writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s3c_irq_vic_eint_unmask(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- unsigned int real;
-
- s3c_irq_eint_unmask(irq);
- real = s3c_get_eint(irq);
- writel(1 << real, base + VIC_INT_ENABLE);
-}
-
-static inline void s3c_irq_vic_eint_ack(unsigned int irq)
-{
- u32 bit;
- u32 bank = s3c_get_bank(irq);
-
- bit = s3c_eint_to_bit(irq);
- __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_vic_eint_maskack(unsigned int irq)
-{
- /* compiler should in-line these */
- s3c_irq_vic_eint_mask(irq);
- s3c_irq_vic_eint_ack(irq);
-}
-
-static struct irq_chip s3c_irq_vic_eint = {
- .name = "EINT",
- .mask = s3c_irq_vic_eint_mask,
- .unmask = s3c_irq_vic_eint_unmask,
- .mask_ack = s3c_irq_vic_eint_maskack,
- .ack = s3c_irq_vic_eint_ack,
- .set_type = s3c_irq_eint_set_type,
- .set_wake = s3c_irqext_wake,
-};
-
-static int __init s5pc1xx_init_irq_eint(void)
-{
- int irq;
-
- for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
- set_irq_chip(irq, &s3c_irq_vic_eint);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
- set_irq_chip(irq, &s3c_irq_eint);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
-
- return 0;
-}
-
-arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
deleted file mode 100644
index bfc5248..0000000
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* arch/arm/plat-s5pc1xx/irq.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Interrupt handling
- *
- * Based on plat-s3c64xx/irq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
- [0] = {
- .regs = (void *)S3C_VA_UART0,
- .base_irq = IRQ_S3CUART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = (void *)S3C_VA_UART1,
- .base_irq = IRQ_S3CUART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = (void *)S3C_VA_UART2,
- .base_irq = IRQ_S3CUART_BASE2,
- .parent_irq = IRQ_UART2,
- },
- [3] = {
- .regs = (void *)S3C_VA_UART3,
- .base_irq = IRQ_S3CUART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-};
-
-void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
-{
- int i;
-
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- for (i = 0; i < num; i++)
- vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
- vic_valid[i], 0);
-
- /* add the timer sub-irqs */
-
- s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
- s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
- s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
- s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
- s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
-
- s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
-}
-
-
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
deleted file mode 100644
index 2bf6c57..0000000
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ /dev/null
@@ -1,876 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
- *
- * Copyright 2009 Samsung Electronics, Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 based common clock support
- *
- * Based on plat-s3c64xx/s3c6400-clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
- .id = -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-#define clk_fout_mpll clk_mpll
-#define clk_vclk_54m clk_54m
-
-/* APLL */
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
- .id = -1,
- .rate = 27000000,
-};
-
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
- ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll = {
- .name = "dout_apll",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_apll_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
- ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
-
- if (parent < rate)
- return rate;
-
- div = (parent / rate) - 1;
- if (div > S5PC100_CLKDIV0_ARM_MASK)
- div = S5PC100_CLKDIV0_ARM_MASK;
-
- return parent / (div + 1);
-}
-
-static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
- u32 val;
-
- if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
- return -EINVAL;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
-
- val = __raw_readl(S5PC100_CLKDIV0);
- val &= S5PC100_CLKDIV0_ARM_MASK;
- val |= (div - 1);
- __raw_writel(val, S5PC100_CLKDIV0);
-
- return 0;
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .parent = &clk_dout_apll,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_arm_get_rate,
- .set_rate = s5pc100_clk_arm_set_rate,
- .round_rate = s5pc100_clk_arm_round_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
- ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d0_bus = {
- .name = "dout_d0_bus",
- .id = -1,
- .parent = &clk_arm,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
- ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd0 = {
- .name = "dout_pclkd0",
- .id = -1,
- .parent = &clk_dout_d0_bus,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
- ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll2 = {
- .name = "dout_apll2",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_apll2_get_rate,
- },
-};
-
-/* MPLL */
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
-};
-
-static struct clk *clkset_am_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_dout_apll2,
-};
-
-static struct clksrc_sources clk_src_am = {
- .sources = clkset_am_list,
- .nr_sources = ARRAY_SIZE(clkset_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
- .clk = {
- .name = "mout_am",
- .id = -1,
- },
- .sources = &clk_src_am,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
- ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d1_bus = {
- .name = "dout_d1_bus",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
- },
-};
-
-static struct clk *clkset_onenand_list[] = {
- [0] = &clk_dout_d0_bus,
- [1] = &clk_dout_d1_bus,
-};
-
-static struct clksrc_sources clk_src_onenand = {
- .sources = clkset_onenand_list,
- .nr_sources = ARRAY_SIZE(clkset_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
- .clk = {
- .name = "mout_onenand",
- .id = -1,
- },
- .sources = &clk_src_onenand,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
- ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd1 = {
- .name = "dout_pclkd1",
- .id = -1,
- .parent = &clk_dout_d1_bus,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
- ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll2 = {
- .name = "dout_mpll2",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_mpll2_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
- ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_cam = {
- .name = "dout_cam",
- .id = -1,
- .parent = &clk_dout_mpll2,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_cam_get_rate,
- },
-};
-
-static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned int ratio;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
- ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
-
- return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_am.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5pc100_clk_dout_mpll_get_rate,
- },
-};
-
-/* EPLL */
-static struct clk clk_fout_epll = {
- .name = "fout_epll",
- .id = -1,
-};
-
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
-};
-
-/* HPLL */
-static struct clk clk_fout_hpll = {
- .name = "fout_hpll",
- .id = -1,
-};
-
-static struct clk *clk_src_hpll_list[] = {
- [0] = &clk_27m,
- [1] = &clk_fout_hpll,
-};
-
-static struct clksrc_sources clk_src_hpll = {
- .sources = clk_src_hpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
- .clk = {
- .name = "mout_hpll",
- .id = -1,
- },
- .sources = &clk_src_hpll,
- .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
-};
-
-/* Peripherals */
-/*
- * The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S5PC100 version, and also
- * have a common parent divisor so are not included here.
- */
-
-static struct clk clk_iis_cd0 = {
- .name = "iis_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_iis_cd1 = {
- .name = "iis_cdclk1",
- .id = -1,
-};
-
-static struct clk clk_iis_cd2 = {
- .name = "iis_cdclk2",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd0 = {
- .name = "pcm_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd1 = {
- .name = "pcm_cdclk1",
- .id = -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd0,
- &clk_pcm_cd0,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio0 = {
- .sources = clkset_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_spi_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll2,
- &clk_fin_epll,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_spi = {
- .sources = clkset_spi_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd1,
- &clk_pcm_cd1,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio1 = {
- .sources = clkset_audio1_list,
- .nr_sources = ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clk *clkset_audio2_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_iis_cd2,
- &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio2 = {
- .sources = clkset_audio2_list,
- .nr_sources = ARRAY_SIZE(clkset_audio2_list),
-};
-
-static struct clksrc_clk clksrc_audio[] = {
- {
- .clk = {
- .name = "audio-bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio0,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
- }, {
- .clk = {
- .name = "audio-bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio1,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
- }, {
- .clk = {
- .name = "audio-bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_audio2,
- .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
- },
-};
-
-static struct clk *clkset_spdif_list[] = {
- &clksrc_audio[0].clk,
- &clksrc_audio[1].clk,
- &clksrc_audio[2].clk,
-};
-
-static struct clksrc_sources clkset_spdif = {
- .sources = clkset_spdif_list,
- .nr_sources = ARRAY_SIZE(clkset_spdif_list),
-};
-
-static struct clk *clkset_lcd_fimc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_mout_hpll.clk,
- &clk_vclk_54m,
-};
-
-static struct clksrc_sources clkset_lcd_fimc = {
- .sources = clkset_lcd_fimc_list,
- .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list),
-};
-
-static struct clk *clkset_mmc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_mout_hpll.clk ,
-};
-
-static struct clksrc_sources clkset_mmc = {
- .sources = clkset_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_mmc_list),
-};
-
-static struct clk *clkset_usbhost_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_mout_hpll.clk,
- &clk_48m,
-};
-
-static struct clksrc_sources clkset_usbhost = {
- .sources = clkset_usbhost_list,
- .nr_sources = ARRAY_SIZE(clkset_usbhost_list),
-};
-
-static struct clksrc_clk clksrc_clks[] = {
- {
- .clk = {
- .name = "spi_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
- }, {
- .clk = {
- .name = "spi_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
- }, {
- .clk = {
- .name = "spi_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_spi,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
- }, {
- .clk = {
- .name = "uclk1",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_uart,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
- }, {
- .clk = {
- .name = "spdif",
- .id = -1,
- },
- .sources = &clkset_spdif,
- .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
- }, {
- .clk = {
- .name = "lcd",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
- }, {
- .clk = {
- .name = "fimc",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clkset_lcd_fimc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
- }, {
- .clk = {
- .name = "mmc_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_mmc,
- .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
- }, {
- .clk = {
- .name = "usbhost",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clkset_usbhost,
- .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
- .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
- }
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_mpll,
- &clk_mout_am,
- &clk_mout_onenand,
- &clk_mout_epll,
- &clk_mout_hpll,
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long hclkd0;
- unsigned long hclk;
- unsigned long pclkd0;
- unsigned long pclk;
- unsigned long apll, mpll, epll, hpll;
- unsigned int ptr;
- u32 clkdiv0, clkdiv1;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
- clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
-
- printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
- mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
- epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
- hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
-
- printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
- ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
- print_mhz(apll), print_mhz(mpll),
- print_mhz(epll), print_mhz(hpll));
-
- armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
- armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
- hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
- pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
- hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
- pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
-
- printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
- " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
- " PCLK=%ld.%03ld MHz\n",
- print_mhz(armclk), print_mhz(hclkd0),
- print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_hpll.rate = hpll;
-
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = armclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
- s3c_set_clksrc(clksrc_audio + ptr, true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
- s3c_set_clksrc(clksrc_clks + ptr, true);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_dout_apll,
- &clk_dout_d0_bus,
- &clk_dout_pclkd0,
- &clk_dout_apll2,
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
- &clk_mout_epll.clk,
- &clk_mout_hpll.clk,
- &clk_mout_am.clk,
- &clk_dout_d1_bus,
- &clk_mout_onenand.clk,
- &clk_dout_pclkd1,
- &clk_dout_mpll2,
- &clk_dout_cam,
- &clk_dout_mpll,
- &clk_fout_epll,
- &clk_iis_cd0,
- &clk_iis_cd1,
- &clk_iis_cd2,
- &clk_pcm_cd0,
- &clk_pcm_cd1,
- &clk_arm,
-};
-
-void __init s5pc100_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
- s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 229919e..b787d57 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,7 +6,7 @@
config PLAT_SAMSUNG
bool
- depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+ depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
select NO_IOPORT
default y
help
@@ -170,6 +170,11 @@
help
Compile in platform device definitions for I2C channel 1
+config S3C_DEV_I2C2
+ bool
+ help
+ Compile in platform device definitions for I2C channel 2
+
config S3C_DEV_FB
bool
help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4828849..606ec84 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -36,6 +36,7 @@
obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c
new file mode 100644
index 0000000..07036de
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c2.c
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c/dev-i2c2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S3C series device definition for i2c device 2
+ *
+ * Based on plat-samsung/dev-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC2,
+ .end = S3C_PA_IIC2 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CAN0,
+ .end = IRQ_CAN0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c2 = {
+ .name = "s3c2410-i2c",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data2 __initdata = {
+ .flags = 0,
+ .bus_num = 2,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data2;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c2_cfg_gpio;
+
+ s3c_device_i2c2.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index cd74a07..8d516d4 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -45,6 +45,7 @@
extern struct platform_device s3c_device_wdt;
extern struct platform_device s3c_device_i2c0;
extern struct platform_device s3c_device_i2c1;
+extern struct platform_device s3c_device_i2c2;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
@@ -89,6 +90,13 @@
extern struct platform_device s5p6440_device_pcm;
extern struct platform_device s5p6440_device_iis;
+extern struct platform_device s5pc100_device_ac97;
+extern struct platform_device s5pc100_device_pcm0;
+extern struct platform_device s5pc100_device_pcm1;
+extern struct platform_device s5pc100_device_iis0;
+extern struct platform_device s5pc100_device_iis1;
+extern struct platform_device s5pc100_device_iis2;
+
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 1f85649..27d3b49 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -84,4 +84,11 @@
*/
extern void s5pc100_fb_gpio_setup_24bpp(void);
+/**
+ * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pv210_fb_gpio_setup_24bpp(void);
+
#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h
index 36397ca..f182669 100644
--- a/arch/arm/plat-samsung/include/plat/iic-core.h
+++ b/arch/arm/plat-samsung/include/plat/iic-core.h
@@ -32,4 +32,11 @@
#endif
}
+static inline void s3c_i2c2_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C2
+ s3c_device_i2c2.name = name;
+#endif
+}
+
#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 3083df0..133308b 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -54,9 +54,11 @@
*/
extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
/* defined by architecture to configure gpio */
extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 7d07cd7..13f9fb2 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -75,6 +75,9 @@
extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
/* S3C6400 SDHCI setup */
@@ -218,4 +221,56 @@
static inline void s5pc100_default_sdhci2(void) { }
#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
+/* S5PC110 SDHCI setup */
+#ifdef CONFIG_S5PV210_SETUP_SDHCI
+extern char *s5pv210_hsmmc_clksrcs[4];
+
+extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pv210_default_sdhci0(void)
+{
+ s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pv210_default_sdhci1(void)
+{
+ s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pv210_default_sdhci2(void)
+{
+ s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
+ s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#else
+static inline void s5pv210_default_sdhci0(void) { }
+static inline void s5pv210_default_sdhci1(void) { }
+static inline void s5pv210_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
+
+
+
#endif /* __PLAT_S3C_SDHCI_H */