diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3f8718f..1cb098f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -699,14 +699,14 @@
 	help
 	  Samsung S5P6442 CPU based systems
 
-config ARCH_S5PC1XX
-	bool "Samsung S5PC1XX"
+config ARCH_S5PC100
+	bool "Samsung S5PC100"
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
 	help
-	  Samsung S5PC1XX series based systems
+	  Samsung S5PC100 series based systems
 
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
@@ -890,7 +890,6 @@
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s5p/Kconfig"
-source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -909,9 +908,7 @@
 
 source "arch/arm/mach-s5p6442/Kconfig"
 
-if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
-endif
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9505a70..f7cb6d4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -167,7 +167,7 @@
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
 machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
-machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
+machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
@@ -192,7 +192,6 @@
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx samsung
 plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 69e9fbf..1f2f412 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -90,6 +90,7 @@
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select SAMSUNG_DEV_TS
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
 	select S3C64XX_SETUP_SDHCI
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 9d51455..d0c6e9b 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -64,6 +64,8 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -262,6 +264,8 @@
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
+	&s3c_device_adc,
+	&s3c_device_ts,
 };
 
 #ifdef CONFIG_REGULATOR
@@ -596,6 +600,12 @@
 	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
 };
 
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
 static void __init smdk6410_map_io(void)
 {
 	u32 tmp;
@@ -625,6 +635,8 @@
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
 	/* configure nCS1 width to 16 bits */
 
 	cs1 = __raw_readl(S3C64XX_SROM_BW) &
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
index 77aeffd..ef00cb7 100644
--- a/arch/arm/mach-s5p6440/Kconfig
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -16,6 +16,8 @@
 config MACH_SMDK6440
 	bool "SMDK6440"
 	select CPU_S5P6440
+	select SAMSUNG_DEV_TS
+	select SAMSUNG_DEV_ADC
 	help
 	  Machine support for the Samsung SMDK6440
 
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
index ca3b320..b2fe6a5 100644
--- a/arch/arm/mach-s5p6440/cpu.c
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -61,6 +61,7 @@
 void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
+	s3c_device_adc.name	= "s3c64xx-adc";
 }
 
 void __init s5p6440_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
index 8246895..d0124f3 100644
--- a/arch/arm/mach-s5p6440/include/mach/map.h
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -72,8 +72,11 @@
 /* PCM */
 #define S5P6440_PA_PCM		0xF2100000
 
+#define S5P6440_PA_ADC		(0xF3000000)
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5P6440_PA_UART
 #define S3C_PA_IIC		S5P6440_PA_IIC0
+#define SAMSUNG_PA_ADC		S5P6440_PA_ADC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
index d7fede9..f994817 100644
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -38,6 +38,8 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
 
 #define S5P6440_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -85,6 +87,14 @@
 
 static struct platform_device *smdk6440_devices[] __initdata = {
 	&s5p6440_device_iis,
+	&s3c_device_adc,
+	&s3c_device_ts,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
 };
 
 static void __init smdk6440_map_io(void)
@@ -96,6 +106,8 @@
 
 static void __init smdk6440_machine_init(void)
 {
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
 }
 
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 8593337..2eb9497 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -5,10 +5,12 @@
 
 # Configuration options for the S5PC100 CPU
 
+if ARCH_S5PC100
+
 config CPU_S5PC100
 	bool
-	select CPU_S5PC100_INIT
-	select CPU_S5PC100_CLOCK
+	select PLAT_S5P
+	select S5P_EXT_INT
 	help
 	  Enable S5PC100 CPU support
 
@@ -17,17 +19,22 @@
 	help
 	  Common setup code for S5PC1XX with an 24bpp RGB display helper.
 
-config S5PC100_SETUP_SDHCI
-        bool
-        select S5PC1XX_SETUP_SDHCI_GPIO
-        help
-          Internal helper functions for S5PC100 based SDHCI systems
-
 config S5PC100_SETUP_I2C1
 	bool
 	help
 	  Common setup code for i2c bus 1.
 
+config S5PC100_SETUP_SDHCI
+	bool
+	select S5PC100_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S5PC100 based SDHCI systems
+
+config S5PC100_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
 config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
@@ -41,3 +48,5 @@
 	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100
+
+endif
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index 65a2911..e1081a9 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -11,18 +11,23 @@
 
 # Core support for S5PC100 system
 
-obj-$(CONFIG_CPU_S5PC100)	+= cpu.o gpiolib.o
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o gpiolib.o irq-gpio.o
 obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
 
 # Helper and device support
 
 obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)	+= setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 
 # device support
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 # machine support
+
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
+
+# device support
+obj-y				+= dev-audio.o
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index d79e757..d424a9f 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,47 +22,53 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
-#include <asm/proc-fns.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <asm/proc-fns.h>
+
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <asm/irq.h>
 
-#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
-#include <plat/regs-power.h>
+#include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/sdhci.h>
 #include <plat/iic-core.h>
+#include <plat/sdhci.h>
 #include <plat/s5pc100.h>
 
 /* Initial IO mappings */
 
 static struct map_desc s5pc100_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5PC100_PA_SYSTIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC100_VA_OTHERS,
+		.pfn		= __phys_to_pfn(S5PC100_PA_OTHERS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}
 };
 
 static void s5pc100_idle(void)
 {
-	unsigned long tmp;
+	if (!need_resched())
+		cpu_do_idle();
 
-	tmp = __raw_readl(S5PC100_PWR_CFG);
-	tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
-	tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
-	tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
-	__raw_writel(tmp, S5PC100_PWR_CFG);
-
-	tmp = __raw_readl(S5PC100_OTHERS);
-	tmp |= S5PC100_PMU_INT_DISABLE;
-	__raw_writel(tmp, S5PC100_OTHERS);
-
-	cpu_do_idle();
+	local_irq_enable();
 }
 
 /* s5pc100_map_io
@@ -86,22 +92,23 @@
 
 void __init s5pc100_init_clocks(int xtal)
 {
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
 	s3c24xx_register_baseclocks(xtal);
-	s5pc1xx_register_clocks();
+	s5p_register_clocks(xtal);
 	s5pc100_register_clocks();
 	s5pc100_setup_clocks();
 }
 
 void __init s5pc100_init_irq(void)
 {
-	u32 vic_valid[] = {~0, ~0, ~0};
+	u32 vic[] = {~0, ~0, ~0};
 
 	/* VIC0, VIC1, and VIC2 are fully populated. */
-	s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-struct sysdev_class s5pc100_sysclass = {
+static struct sysdev_class s5pc100_sysclass = {
 	.name	= "s5pc100-core",
 };
 
@@ -118,9 +125,10 @@
 
 int __init s5pc100_init(void)
 {
-	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+	printk(KERN_INFO "S5PC100: Initializing architecture\n");
 
-	s5pc1xx_idle = s5pc100_idle;
+	/* set idle function */
+	pm_idle = s5pc100_idle;
 
 	return sysdev_register(&s5pc100_sysdev);
 }
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
new file mode 100644
index 0000000..18cfe9a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -0,0 +1,287 @@
+/* linux/arch/arm/mach-s5pc100/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5pc100_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 1:
+		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
+		break;
+
+	case 2:
+		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
+		break;
+
+	case -1: /* Dedicated pins */
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5pc100_cfg_i2s,
+};
+
+static struct resource s5pc100_iis0_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S0,
+		.end   = S5PC100_PA_I2S0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis0 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
+	.resource	  = s5pc100_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pc100_iis1_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S1,
+		.end   = S5PC100_PA_I2S1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_TX,
+		.end   = DMACH_I2S1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_RX,
+		.end   = DMACH_I2S1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
+	.resource	  = s5pc100_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pc100_iis2_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S2,
+		.end   = S5PC100_PA_I2S2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S2_TX,
+		.end   = DMACH_I2S2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S2_RX,
+		.end   = DMACH_I2S2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis2 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
+	.resource	  = s5pc100_iis2_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5));
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5pc100_pcm_cfg_gpio,
+};
+
+static struct resource s5pc100_pcm0_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_PCM0,
+		.end   = S5PC100_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pc100_pcm0_resource),
+	.resource	  = s5pc100_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pc100_pcm1_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_PCM1,
+		.end   = S5PC100_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_pcm1_resource),
+	.resource	  = s5pc100_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4));
+
+	return 0;
+}
+
+static struct resource s5pc100_ac97_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_AC97,
+		.end   = S5PC100_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.cfg_gpio = s5pc100_ac97_cfg_gpio,
+};
+
+static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_ac97_resource),
+	.resource	  = s5pc100_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s5pc100_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c
index c8e8336..0fab7f2 100644
--- a/arch/arm/mach-s5pc100/gpiolib.c
+++ b/arch/arm/mach-s5pc100/gpiolib.c
@@ -1,10 +1,10 @@
 /*
- * arch/arm/plat-s5pc1xx/gpiolib.c
+ * arch/arm/plat-s5pc100/gpiolib.c
  *
  *  Copyright 2009 Samsung Electronics Co
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
- * S5PC1XX - GPIOlib support
+ * S5PC100 - GPIOlib support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -61,13 +61,12 @@
  * L3	8	4Bit	None
  */
 
-#if 0
-static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
 {
 	return S3C_IRQ_GPIO(chip->base + offset);
 }
 
-static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
 {
 	int base;
 
@@ -85,7 +84,7 @@
 		return IRQ_EINT(24 + offset);
 	return -EINVAL;
 }
-#endif
+
 static struct s3c_gpio_cfg gpio_cfg = {
 	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
 	.set_pull	= s3c_gpio_setpull_updown,
@@ -382,31 +381,30 @@
 };
 
 /* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc1xx_gpioint;
-extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+extern struct irq_chip s5pc100_gpioint;
+extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
 
 static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
 {
-#if 0
 	/* Interrupt */
 	if (chip->config == &gpio_cfg) {
 		int i, irq;
 
-		chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
+		chip->chip.to_irq = s5pc100_gpiolib_to_irq;
 
 		for (i = 0;  i < chip->chip.ngpio; i++) {
 			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
-			set_irq_chip(irq, &s5pc1xx_gpioint);
+			set_irq_chip(irq, &s5pc100_gpioint);
 			set_irq_data(irq, &chip->chip);
 			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, IRQF_VALID);
 		}
-	} else if (chip->config == &gpio_cfg_eint)
-		chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
-#endif
+	} else if (chip->config == &gpio_cfg_eint) {
+		chip->chip.to_irq = s5pc100_gpiolib_to_eint;
+	}
 }
 
-static __init int s5pc1xx_gpiolib_init(void)
+static __init int s5pc100_gpiolib_init(void)
 {
 	struct s3c_gpio_chip *chip;
 	int nr_chips;
@@ -419,10 +417,10 @@
 
 	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
 				       ARRAY_SIZE(s5pc100_gpio_chips));
-#if 0
+
 	/* Interrupt */
-	set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
-#endif
+	set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
+
 	return 0;
 }
-core_initcall(s5pc1xx_gpiolib_init);
+core_initcall(s5pc100_gpiolib_init);
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index e181f57..70e02e9 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,12 +22,14 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
+	.macro addruart, rx, rtmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
 		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
 	.endm
 
 /* include the reset of the code which will do the work, we're only
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index 6713193..ba76af0 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -20,7 +20,7 @@
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =S3C_VA_VIC0
+	ldr	\base, =VA_VIC0
 	.endm
 
 	.macro	arch_ret_to_user, tmp1, tmp2
@@ -29,18 +29,18 @@
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 
 	@ check the vic0
-	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
 	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
 	teq	\irqstat, #0
 
 	@ otherwise try vic1
-	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
 	addeq	\irqnr, \irqnr, #32
 	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
 	teqeq	\irqstat, #0
 
 	@ otherwise try vic2
-	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
 	addeq	\irqnr, \irqnr, #32
 	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
 	teqeq	\irqstat, #0
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 29a8a12..71ae1f5 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -146,6 +146,13 @@
 /* define the number of gpios we need to the one after the MP04() range */
 #define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
+#define EINT_MODE		S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
+#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
+#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
+#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
+
 #include <asm-generic/gpio.h>
 
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index b53fa48..28aa551 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,9 +11,104 @@
 
 #include <plat/irqs.h>
 
-/* LCD */
+/* VIC0: system, DMA, timer */
+#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
+#define IRQ_BATF		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+
+/* VIC1: ARM, power, memory, connectivity */
+#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
+#define IRQ_NFC			S5P_IRQ_VIC1(8)
+#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_UART0		S5P_IRQ_VIC1(10)
+#define IRQ_UART1		S5P_IRQ_VIC1(11)
+#define IRQ_UART2		S5P_IRQ_VIC1(12)
+#define IRQ_UART3		S5P_IRQ_VIC1(13)
+#define IRQ_IIC			S5P_IRQ_VIC1(14)
+#define IRQ_SPI0		S5P_IRQ_VIC1(15)
+#define IRQ_SPI1		S5P_IRQ_VIC1(16)
+#define IRQ_SPI2		S5P_IRQ_VIC1(17)
+#define IRQ_IRDA		S5P_IRQ_VIC1(18)
+#define IRQ_CAN0		S5P_IRQ_VIC1(19)
+#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
+#define IRQ_HSITX		S5P_IRQ_VIC1(22)
+#define IRQ_UHOST		S5P_IRQ_VIC1(23)
+#define IRQ_OTG			S5P_IRQ_VIC1(24)
+#define IRQ_MSM			S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
+
+/* VIC2: multimedia, audio, security */
+#define IRQ_LCD0		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG		S5P_IRQ_VIC2(8)
+#define IRQ_2D			S5P_IRQ_VIC2(9)
+#define IRQ_3D			S5P_IRQ_VIC2(10)
+#define IRQ_MIXER		S5P_IRQ_VIC2(11)
+#define IRQ_HDMI		S5P_IRQ_VIC2(12)
+#define IRQ_IIC1		S5P_IRQ_VIC2(13)
+#define IRQ_MFC			S5P_IRQ_VIC2(14)
+#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1		S5P_IRQ_VIC2(17)
+#define IRQ_I2S2		S5P_IRQ_VIC2(18)
+#define IRQ_AC97		S5P_IRQ_VIC2(19)
+#define IRQ_PCM0		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1		S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
+#define IRQ_ADC			S5P_IRQ_VIC2(23)
+#define IRQ_PENDN		S5P_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
+#define IRQ_CG			S5P_IRQ_VIC2(26)
+#define IRQ_SEC			S5P_IRQ_VIC2(27)
+#define IRQ_SECRX		S5P_IRQ_VIC2(28)
+#define IRQ_SECTX		S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
+#define IRQ_VIC_END		S5P_IRQ_VIC2(31)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
+
+#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+
+/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
+#define NR_IRQS		(S3C_IRQ_GPIO(320) + 1)
+
+/* Compatibility */
 #define IRQ_LCD_FIFO		IRQ_LCD0
 #define IRQ_LCD_VSYNC		IRQ_LCD1
 #define IRQ_LCD_SYSTEM		IRQ_LCD2
 
-#endif /* __ASM_ARCH_IRQ_H */
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 5ff7931..8800954 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -3,9 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * Based on mach-s3c6400/include/mach/map.h
- *
- * S5PC1XX - Memory map definitions
+ * S5PC100 - Memory map definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,71 +14,44 @@
 #define __ASM_ARCH_MAP_H __FILE__
 
 #include <plat/map-base.h>
+#include <plat/map-s5p.h>
 
-/*
- * map-base.h has already defined virtual memory address
- * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
- * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
- * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
- * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
- * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
- * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
- *
- * S5PC100 specific virtual memory address can be defined here
- * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
- *
- */
-
-/* Chip ID */
 #define S5PC100_PA_CHIPID	(0xE0000000)
-#define S5PC1XX_PA_CHIPID	S5PC100_PA_CHIPID
-#define S5PC1XX_VA_CHIPID	S3C_VA_SYS
+#define S5P_PA_CHIPID		S5PC100_PA_CHIPID
 
-/* System */
-#define S5PC100_PA_CLK		(0xE0100000)
-#define S5PC100_PA_CLK_OTHER	(0xE0200000)
-#define S5PC100_PA_PWR		(0xE0108000)
-#define S5PC1XX_PA_CLK		S5PC100_PA_CLK
-#define S5PC1XX_PA_PWR		S5PC100_PA_PWR
-#define S5PC1XX_PA_CLK_OTHER	S5PC100_PA_CLK_OTHER
-#define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
-#define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
-#define S5PC1XX_VA_CLK_OTHER	(S3C_VA_SYS + 0x30000)
+#define S5PC100_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5PC100_PA_SYSCON
 
-/* GPIO */
+#define S5PC100_PA_OTHERS	(0xE0200000)
+#define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
+
 #define S5PC100_PA_GPIO		(0xE0300000)
-#define S5PC1XX_PA_GPIO		S5PC100_PA_GPIO
-#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S5P_PA_GPIO		S5PC100_PA_GPIO
 
-/* Interrupt */
-#define S5PC100_PA_VIC		(0xE4000000)
-#define S5PC100_VA_VIC		S3C_VA_IRQ
-#define S5PC100_PA_VIC_OFFSET	0x100000
-#define S5PC100_VA_VIC_OFFSET	0x10000
-#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
-#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_VIC0		(0xE4000000)
+#define S5P_PA_VIC0		S5PC100_PA_VIC0
 
-/* DMA */
-#define S5PC100_PA_MDMA		(0xE8100000)
-#define S5PC100_PA_PDMA0	(0xE9000000)
-#define S5PC100_PA_PDMA1	(0xE9200000)
+#define S5PC100_PA_VIC1		(0xE4100000)
+#define S5P_PA_VIC1		S5PC100_PA_VIC1
 
-/* Timer */
+#define S5PC100_PA_VIC2		(0xE4200000)
+#define S5P_PA_VIC2		S5PC100_PA_VIC2
+
 #define S5PC100_PA_TIMER	(0xEA000000)
-#define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
-#define S5PC1XX_VA_TIMER	S3C_VA_TIMER
+#define S5P_PA_TIMER		S5PC100_PA_TIMER
 
-/* RTC */
-#define S5PC100_PA_RTC		(0xEA300000)
+#define S5PC100_PA_SYSTIMER	(0xEA100000)
 
-/* UART */
 #define S5PC100_PA_UART		(0xEC000000)
-#define S5PC1XX_PA_UART		S5PC100_PA_UART
-#define S5PC1XX_VA_UART		S3C_VA_UART
 
-/* I2C */
-#define S5PC100_PA_I2C		(0xEC100000)
-#define S5PC100_PA_I2C1		(0xEC200000)
+#define S5P_PA_UART0		(S5PC100_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5PC100_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5PC100_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5PC100_PA_UART + 0xC00)
+#define S5P_SZ_UART		SZ_256
+
+#define S5PC100_PA_IIC0		(0xEC100000)
+#define S5PC100_PA_IIC1		(0xEC200000)
 
 /* SPI */
 #define S5PC100_PA_SPI0		0xEC300000
@@ -91,65 +62,29 @@
 #define S5PC100_PA_USB_HSOTG	(0xED200000)
 #define S5PC100_PA_USB_HSPHY	(0xED300000)
 
-/* SD/MMC */
-#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
-#define S5PC100_PA_HSMMC0	S5PC100_PA_HSMMC(0)
-#define S5PC100_PA_HSMMC1	S5PC100_PA_HSMMC(1)
-#define S5PC100_PA_HSMMC2	S5PC100_PA_HSMMC(2)
-
-/* LCD */
 #define S5PC100_PA_FB		(0xEE000000)
 
-/* Multimedia */
-#define S5PC100_PA_G2D		(0xEE800000)
-#define S5PC100_PA_JPEG		(0xEE500000)
-#define S5PC100_PA_ROTATOR	(0xEE100000)
-#define S5PC100_PA_G3D		(0xEF000000)
+#define S5PC100_PA_AC97		0xF2300000
 
-/* I2S */
-#define S5PC100_PA_I2S0		(0xF2000000)
-#define S5PC100_PA_I2S1		(0xF2100000)
-#define S5PC100_PA_I2S2		(0xF2200000)
+/* PCM */
+#define S5PC100_PA_PCM0		0xF2400000
+#define S5PC100_PA_PCM1		0xF2500000
 
 /* KEYPAD */
 #define S5PC100_PA_KEYPAD	(0xF3100000)
 
-/* ADC & TouchScreen */
-#define S5PC100_PA_TSADC	(0xF3000000)
+#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
-/* ETC */
 #define S5PC100_PA_SDRAM	(0x20000000)
-#define S5PC1XX_PA_SDRAM	S5PC100_PA_SDRAM
+#define S5P_PA_SDRAM		S5PC100_PA_SDRAM
 
-/* compatibility defines. */
-#define S3C_PA_RTC		S5PC100_PA_RTC
+/* compatibiltiy defines. */
 #define S3C_PA_UART		S5PC100_PA_UART
-#define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
-#define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
-#define S3C_PA_UART2		(S5PC100_PA_UART + 0x800)
-#define S3C_PA_UART3		(S5PC100_PA_UART + 0xC00)
-#define S3C_VA_UART0		(S3C_VA_UART + 0x0)
-#define S3C_VA_UART1		(S3C_VA_UART + 0x400)
-#define S3C_VA_UART2		(S3C_VA_UART + 0x800)
-#define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
-#define S3C_UART_OFFSET		0x400
-#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_IIC		S5PC100_PA_IIC0
+#define S3C_PA_IIC1		S5PC100_PA_IIC1
 #define S3C_PA_FB		S5PC100_PA_FB
-#define S3C_PA_G2D		S5PC100_PA_G2D
-#define S3C_PA_G3D		S5PC100_PA_G3D
-#define S3C_PA_JPEG		S5PC100_PA_JPEG
-#define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
-#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
-#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
-#define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC		S5PC100_PA_I2C
-#define S3C_PA_IIC1		S5PC100_PA_I2C1
-#define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC0
-#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC1
-#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC2
-#define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
-#define S3C_PA_TSADC		S5PC100_PA_TSADC
+#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC(2)
 
-#endif /* __ASM_ARCH_C100_MAP_H */
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
index f2283bd..5d27d28 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
@@ -17,6 +17,8 @@
 
 #define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
 
+#define S5PC100_REG_OTHERS(x)	(S5PC100_VA_OTHERS + (x))
+
 #define S5P_APLL_LOCK		S5P_CLKREG(0x00)
 #define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
 #define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
@@ -68,4 +70,8 @@
 #define S5P_CLKDIV1_PCLKD1_MASK		(0x7<<16)
 #define S5P_CLKDIV1_PCLKD1_SHIFT	(16)
 
+#define S5PC100_SWRESET		S5PC100_REG_OTHERS(0x000)
+
+#define S5PC100_SWRESET_RESETVAL	0xc100
+
 #endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
index 6866691..dd6295e 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
  *
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
@@ -12,7 +12,7 @@
 #include <mach/map.h>
 
 /* S5PC100 */
-#define S5PC100_GPIO_BASE	S5PC1XX_VA_GPIO
+#define S5PC100_GPIO_BASE	S5P_VA_GPIO
 #define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
 #define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
 #define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
@@ -47,24 +47,29 @@
 #define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
 #define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
 #define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
-#define S5PC100_EINT_BASE	(S5PC100_GPIO_BASE + 0x0E00)
 
-#define S5PC100_UHOST		(S5PC100_GPIO_BASE + 0x0B68)
-#define S5PC100_PDNEN		(S5PC100_GPIO_BASE + 0x0F80)
+#define S5PC100EINT30CON		(S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x)			(S5PC100EINT30CON + ((x) * 0x4))
 
-/* PDNEN */
-#define S5PC100_PDNEN_CFG_PDNEN	(1 << 1)
-#define S5PC100_PDNEN_CFG_AUTO	(0 << 1)
-#define S5PC100_PDNEN_POWERDOWN	(1 << 0)
-#define S5PC100_PDNEN_NORMAL	(0 << 0)
+#define S5PC100EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x)		(S5PC100EINT30FLTCON0 + ((x) * 0x4))
 
-/* Common part */
-/* External interrupt base is same at both s5pc100 and s5pc110 */
-#define S5PC1XX_EINT_BASE	(S5PC100_EINT_BASE)
+#define S5PC100EINT30MASK		(S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x)		(S5PC100EINT30MASK + ((x) * 0x4))
 
-#define S5PC100_GPx_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S5PC100_GPx_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-#define S5PC100_GPx_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S5PC100EINT30PEND		(S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x)		(S5PC100EINT30PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV		(0x00)
+#define S5P_EXTINT_HILEV		(0x01)
+#define S5P_EXTINT_FALLEDGE		(0x02)
+#define S5P_EXTINT_RISEEDGE		(0x03)
+#define S5P_EXTINT_BOTHEDGE		(0x04)
 
 #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
 
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
index 751ac15..4d9036d 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * S5PC1XX - IRQ register definitions
+ * S5PC100 - IRQ register definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,9 +16,4 @@
 #include <mach/map.h>
 #include <asm/hardware/vic.h>
 
-/* interrupt controller */
-#define S5PC1XX_VIC0REG(x)          		((x) + S5PC1XX_VA_VIC(0))
-#define S5PC1XX_VIC1REG(x)          		((x) + S5PC1XX_VA_VIC(1))
-#define S5PC1XX_VIC2REG(x)         		((x) + S5PC1XX_VA_VIC(2))
-
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index f0d31a2..681f626 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
  *
- * S5PC1XX - system implementation
+ * S5PC100 - system implementation
  *
  * Based on mach-s3c6400/include/mach/system.h
  */
@@ -13,14 +13,11 @@
 
 #include <linux/io.h>
 #include <mach/map.h>
-#include <plat/regs-clock.h>
-
-void (*s5pc1xx_idle)(void);
+#include <mach/regs-clock.h>
 
 static void arch_idle(void)
 {
-	if (s5pc1xx_idle)
-		s5pc1xx_idle();
+	/* nothing here yet */
 }
 
 static void arch_reset(char mode, const char *cmd)
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index f338c9e..20f6873 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -20,8 +20,8 @@
  */
 static inline u32 s3c24xx_ostimer_pending(void)
 {
-	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0));
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
 }
 
 #define TICK_MAX	(0xffffffff)
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/mach-s5pc100/init.c
similarity index 67%
rename from arch/arm/plat-s5pc1xx/s5pc100-init.c
rename to arch/arm/mach-s5pc100/init.c
index c587108..19d7b52 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-init.c
+++ b/arch/arm/mach-s5pc100/init.c
@@ -1,9 +1,8 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
  *
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
  *
- * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,9 +18,7 @@
 #include <plat/s5pc100.h>
 
 /* uart registration process */
-
 void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
-	/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
-	s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c
similarity index 72%
rename from arch/arm/plat-s5pc1xx/irq-gpio.c
rename to arch/arm/mach-s5pc100/irq-gpio.c
index fecca7a..2bf86c1 100644
--- a/arch/arm/plat-s5pc1xx/irq-gpio.c
+++ b/arch/arm/mach-s5pc100/irq-gpio.c
@@ -1,9 +1,9 @@
 /*
- * arch/arm/plat-s5pc1xx/irq-gpio.c
+ * arch/arm/mach-s5pc100/irq-gpio.c
  *
  * Copyright (C) 2009 Samsung Electronics
  *
- * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
+ * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,7 +19,7 @@
 #include <mach/map.h>
 #include <plat/gpio-cfg.h>
 
-#define S5PC1XX_GPIOREG(x)		(S5PC1XX_VA_GPIO + (x))
+#define S5P_GPIOREG(x)		(S5P_VA_GPIO + (x))
 
 #define CON_OFFSET			0x700
 #define MASK_OFFSET			0x900
@@ -49,7 +49,7 @@
 	return group << 2;
 }
 
-static int s5pc1xx_get_start(unsigned int group)
+static int s5pc100_get_start(unsigned int group)
 {
 	switch (group) {
 	case 0: return S5PC100_GPIO_A0_START;
@@ -80,7 +80,7 @@
 	return -EINVAL;
 }
 
-static int s5pc1xx_get_group(unsigned int irq)
+static int s5pc100_get_group(unsigned int irq)
 {
 	irq -= S3C_IRQ_GPIO(0);
 
@@ -134,67 +134,67 @@
 	return -EINVAL;
 }
 
-static int s5pc1xx_get_offset(unsigned int irq)
+static int s5pc100_get_offset(unsigned int irq)
 {
 	struct gpio_chip *chip = get_irq_data(irq);
 	return irq - S3C_IRQ_GPIO(chip->base);
 }
 
-static void s5pc1xx_gpioint_ack(unsigned int irq)
+static void s5pc100_gpioint_ack(unsigned int irq)
 {
 	int group, offset, pend_offset;
 	unsigned int value;
 
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
 	pend_offset = group_to_pend_offset(group);
 
-	value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+	value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
 	value |= 1 << offset;
-	__raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+	__raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
 }
 
-static void s5pc1xx_gpioint_mask(unsigned int irq)
+static void s5pc100_gpioint_mask(unsigned int irq)
 {
 	int group, offset, mask_offset;
 	unsigned int value;
 
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
 	mask_offset = group_to_mask_offset(group);
 
-	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
 	value |= 1 << offset;
-	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
 }
 
-static void s5pc1xx_gpioint_unmask(unsigned int irq)
+static void s5pc100_gpioint_unmask(unsigned int irq)
 {
 	int group, offset, mask_offset;
 	unsigned int value;
 
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
 	mask_offset = group_to_mask_offset(group);
 
-	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
 	value &= ~(1 << offset);
-	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
 }
 
-static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
+static void s5pc100_gpioint_mask_ack(unsigned int irq)
 {
-	s5pc1xx_gpioint_mask(irq);
-	s5pc1xx_gpioint_ack(irq);
+	s5pc100_gpioint_mask(irq);
+	s5pc100_gpioint_ack(irq);
 }
 
-static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
+static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
 {
 	int group, offset, con_offset;
 	unsigned int value;
 
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
 	con_offset = group_to_con_offset(group);
 
 	switch (type) {
@@ -221,24 +221,24 @@
 	}
 
 
-	value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+	value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
 	value &= ~(0xf << (offset * 0x4));
 	value |= (type << (offset * 0x4));
-	__raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+	__raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
 
 	return 0;
 }
 
-struct irq_chip s5pc1xx_gpioint = {
+struct irq_chip s5pc100_gpioint = {
 	.name		= "GPIO",
-	.ack		= s5pc1xx_gpioint_ack,
-	.mask		= s5pc1xx_gpioint_mask,
-	.mask_ack	= s5pc1xx_gpioint_mask_ack,
-	.unmask		= s5pc1xx_gpioint_unmask,
-	.set_type	= s5pc1xx_gpioint_set_type,
+	.ack		= s5pc100_gpioint_ack,
+	.mask		= s5pc100_gpioint_mask,
+	.mask_ack	= s5pc100_gpioint_mask_ack,
+	.unmask		= s5pc100_gpioint_unmask,
+	.set_type	= s5pc100_gpioint_set_type,
 };
 
-void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int group, offset, pend_offset, mask_offset;
 	int real_irq, group_end;
@@ -248,17 +248,17 @@
 
 	for (group = 0; group < group_end; group++) {
 		pend_offset = group_to_pend_offset(group);
-		pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+		pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
 		if (!pend)
 			continue;
 
 		mask_offset = group_to_mask_offset(group);
-		mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+		mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
 		pend &= ~mask;
 
 		for (offset = 0; offset < 8; offset++) {
 			if (pend & (1 << offset)) {
-				real_irq = s5pc1xx_get_start(group) + offset;
+				real_irq = s5pc100_get_start(group) + offset;
 				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
 			}
 		}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index bfe67db..af22f82 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -43,38 +43,48 @@
 #include <plat/fb.h>
 #include <plat/iic.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PC100_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S3C2440_UFCON_RXTRIG8 |	\
+				 S3C2440_UFCON_TXTRIG16)
 
 static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport	     = 3,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 };
 
@@ -118,8 +128,7 @@
 static struct s3c_fb_pd_win smdkc100_fb_win0 = {
 	/* this is to ensure we use win0 */
 	.win_mode	= {
-		.refresh	= 70,
-		.pixclock	= (8+13+3+800)*(7+5+1+480),
+		.pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80),
 		.left_margin	= 8,
 		.right_margin	= 13,
 		.upper_margin	= 7,
@@ -140,8 +149,6 @@
 	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
 };
 
-static struct map_desc smdkc100_iodesc[] = {};
-
 static struct platform_device *smdkc100_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
@@ -150,11 +157,13 @@
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&smdkc100_lcd_powerdev,
+	&s5pc100_device_iis0,
+	&s5pc100_device_ac97,
 };
 
 static void __init smdkc100_map_io(void)
 {
-	s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
 }
@@ -178,10 +187,9 @@
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S5PC100_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S5PC100_PA_SDRAM + 0x100,
-
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pc100_init_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
similarity index 94%
rename from arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
rename to arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index 185c894..7769c76 100644
--- a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -1,8 +1,8 @@
-/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
  *
  * Copyright 2009 Samsung Eletronics
  *
- * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 7601c28..88f81ce 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -13,18 +13,61 @@
 	bool
 	select PLAT_S5P
 	select S3C_PL330_DMA
+	select S5P_EXT_INT
 	help
 	  Enable S5PV210 CPU support
 
-choice
-	prompt "Select machine type"
-	depends on ARCH_S5PV210
-	default MACH_SMDKV210
+config S5PV210_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S5PV210_SETUP_I2C2
+	bool
+	help
+	  Common setup code for i2c bus 2.
+
+config S5PV210_SETUP_FB_24BPP
+	bool
+	help
+          Common setup code for S5PV210 with an 24bpp RGB display helper.
+
+config S5PV210_SETUP_SDHCI
+        bool
+        select S5PV210_SETUP_SDHCI_GPIO
+        help
+          Internal helper functions for S5PV210 based SDHCI systems
+
+config S5PV210_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
+# machine support
+
+config MACH_AQUILA
+	bool "Samsung Aquila"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	select S5PV210_SETUP_FB_24BPP
+	select S3C_DEV_FB
+	help
+	  Machine support for the Samsung Aquila target based on S5PC110 SoC
+
+config MACH_GONI
+	bool "GONI"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung GONI board
+	  S5PC110(MCP) is one of package option of S5PV210
 
 config MACH_SMDKV210
 	bool "SMDKV210"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
 	help
 	  Machine support for Samsung SMDKV210
 
@@ -36,6 +79,4 @@
 	  Machine support for Samsung SMDKC110
 	  S5PC110(MCP) is one of package option of S5PV210
 
-endchoice
-
 endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index ba0d709..6a6dea1 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -17,10 +17,18 @@
 
 # machine support
 
+obj-$(CONFIG_MACH_AQUILA)	+= mach-aquila.o
 obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
 obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
+obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
 
 # device support
 
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+
+obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
+obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 2b776eb..76084d8 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -32,6 +32,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/s5pv210.h>
+#include <plat/iic-core.h>
+#include <plat/sdhci.h>
 
 /* Initial IO mappings */
 
@@ -74,7 +76,19 @@
 
 void __init s5pv210_map_io(void)
 {
+	s3c_device_adc.name	= "s3c64xx-adc";
+
 	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+
+	/* initialise device information early */
+	s5pv210_default_sdhci0();
+	s5pv210_default_sdhci1();
+	s5pv210_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
 }
 
 void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 62c5175..92fc6c7 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -17,22 +17,6 @@
 
 /* VIC0: System, DMA, Timer */
 
-#define IRQ_EINT0		S5P_IRQ_VIC0(0)
-#define IRQ_EINT1		S5P_IRQ_VIC0(1)
-#define IRQ_EINT2		S5P_IRQ_VIC0(2)
-#define IRQ_EINT3		S5P_IRQ_VIC0(3)
-#define IRQ_EINT4		S5P_IRQ_VIC0(4)
-#define IRQ_EINT5		S5P_IRQ_VIC0(5)
-#define IRQ_EINT6		S5P_IRQ_VIC0(6)
-#define IRQ_EINT7		S5P_IRQ_VIC0(7)
-#define IRQ_EINT8		S5P_IRQ_VIC0(8)
-#define IRQ_EINT9		S5P_IRQ_VIC0(9)
-#define IRQ_EINT10		S5P_IRQ_VIC0(10)
-#define IRQ_EINT11		S5P_IRQ_VIC0(11)
-#define IRQ_EINT12		S5P_IRQ_VIC0(12)
-#define IRQ_EINT13		S5P_IRQ_VIC0(13)
-#define IRQ_EINT14		S5P_IRQ_VIC0(14)
-#define IRQ_EINT15		S5P_IRQ_VIC0(15)
 #define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
 #define IRQ_BATF		S5P_IRQ_VIC0(17)
 #define IRQ_MDMA		S5P_IRQ_VIC0(18)
@@ -134,13 +118,25 @@
 #define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
 #define IRQ_VIC_END		S5P_IRQ_VIC3(31)
 
-#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
+#define S5P_EINT_16_31_BASE	(IRQ_VIC_END + 1)
 
-#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S5P_EINT(x)
+#define EINT_MODE		S3C_GPIO_SFN(0xf)
+
+#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \
+					: ((x) + S5P_EINT_16_31_BASE))
 
 /* Set the default NR_IRQS */
 
-#define NR_IRQS 		(IRQ_EINT(31) + 1)
+#define NR_IRQS			(IRQ_EINT(31) + 1)
+
+#define EINT_GPIO_0(x)		S5PV210_GPH0(x)
+#define EINT_GPIO_1(x)		S5PV210_GPH1(x)
+#define EINT_GPIO_2(x)		S5PV210_GPH2(x)
+#define EINT_GPIO_3(x)		S5PV210_GPH3(x)
+
+/* Compatibility */
+#define IRQ_LCD_FIFO		IRQ_LCD0
+#define IRQ_LCD_VSYNC		IRQ_LCD1
+#define IRQ_LCD_SYSTEM		IRQ_LCD2
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 9ab0069..6fb7bfd 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -30,6 +30,8 @@
 #define S5PV210_PA_SPI1		0xE1400000
 
 #define S5PV210_PA_IIC0		(0xE1800000)
+#define S5PV210_PA_IIC1		(0xFAB00000)
+#define S5PV210_PA_IIC2		(0xE1A00000)
 
 #define S5PV210_PA_TIMER	(0xE2500000)
 #define S5P_PA_TIMER		S5PV210_PA_TIMER
@@ -51,6 +53,10 @@
 #define S5PV210_PA_PDMA0	0xE0900000
 #define S5PV210_PA_PDMA1	0xE0A00000
 
+#define S5PV210_PA_FB		(0xF8000000)
+
+#define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
+
 #define S5PV210_PA_VIC0		(0xF2000000)
 #define S5P_PA_VIC0		S5PV210_PA_VIC0
 
@@ -79,8 +85,18 @@
 /* AC97 */
 #define S5PV210_PA_AC97		0xE2200000
 
+#define S5PV210_PA_ADC		(0xE1700000)
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5PV210_PA_UART
+#define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5PV210_PA_HSMMC(2)
 #define S3C_PA_IIC		S5PV210_PA_IIC0
+#define S3C_PA_IIC1		S5PV210_PA_IIC1
+#define S3C_PA_IIC2		S5PV210_PA_IIC2
+#define S3C_PA_FB		S5PV210_PA_FB
+
+#define SAMSUNG_PA_ADC		S5PV210_PA_ADC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index e56e0e4..2a25ab40 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -126,6 +126,7 @@
 
 #define S5P_RST_STAT		S5P_CLKREG(0xA000)
 #define S5P_OSC_CON		S5P_CLKREG(0x8000)
+#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
 #define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
 #define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
 #define S5P_MIPI_CONTROL	S5P_CLKREG(0xE814)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
new file mode 100644
index 0000000..6d06809
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PV210_EINT30CON		(S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x)			(S5PV210_EINT30CON + ((x) * 0x4))
+
+#define S5PV210_EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x)		(S5PV210_EINT30FLTCON0 + ((x) * 0x4))
+
+#define S5PV210_EINT30MASK		(S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x)		(S5PV210_EINT30MASK + ((x) * 0x4))
+
+#define S5PV210_EINT30PEND		(S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x)		(S5PV210_EINT30PEND + ((x) * 0x4))
+
+#define eint_offset(irq)	((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \
+						: ((irq) - S5P_EINT_16_31_BASE))
+
+#define EINT_REG_NR(x)			(eint_offset(x) >> 3)
+
+#define eint_irq_to_bit(irq)		(1 << (eint_offset(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV		(0x00)
+#define S5P_EXTINT_HILEV		(0x01)
+#define S5P_EXTINT_FALLEDGE		(0x02)
+#define S5P_EXTINT_RISEEDGE		(0x03)
+#define S5P_EXTINT_BOTHEDGE		(0x04)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
new file mode 100644
index 0000000..10bc76e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/mach-s5pv210/mach-aquila.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/fb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/fb.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win aquila_fb_win0 = {
+	.win_mode = {
+		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
+		.left_margin = 16,
+		.right_margin = 16,
+		.upper_margin = 3,
+		.lower_margin = 28,
+		.hsync_len = 2,
+		.vsync_len = 2,
+		.xres = 480,
+		.yres = 800,
+	},
+	.max_bpp = 32,
+	.default_bpp = 16,
+};
+
+static struct s3c_fb_pd_win aquila_fb_win1 = {
+	.win_mode = {
+		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
+		.left_margin = 16,
+		.right_margin = 16,
+		.upper_margin = 3,
+		.lower_margin = 28,
+		.hsync_len = 2,
+		.vsync_len = 2,
+		.xres = 480,
+		.yres = 800,
+	},
+	.max_bpp = 32,
+	.default_bpp = 16,
+};
+
+static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
+	.win[0]		= &aquila_fb_win0,
+	.win[1]		= &aquila_fb_win1,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
+	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
+};
+
+static struct platform_device *aquila_devices[] __initdata = {
+	&s3c_device_fb,
+};
+
+static void __init aquila_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init aquila_machine_init(void)
+{
+	/* FB */
+	s3c_fb_set_platdata(&aquila_lcd_pdata);
+
+	platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
+}
+
+MACHINE_START(AQUILA, "Aquila")
+	/* Maintainers:
+	   Marek Szyprowski <m.szyprowski@samsung.com>
+	   Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= aquila_map_io,
+	.init_machine	= aquila_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
new file mode 100644
index 0000000..4863b13
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-goni.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *goni_devices[] __initdata = {
+};
+
+static void __init goni_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
+}
+
+static void __init goni_machine_init(void)
+{
+	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
+}
+
+MACHINE_START(GONI, "GONI")
+	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= goni_map_io,
+	.init_machine	= goni_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 3c29e18..b92beb6 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -25,6 +25,8 @@
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -74,6 +76,14 @@
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
+	&s3c_device_adc,
+	&s3c_device_ts,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
 };
 
 static void __init smdkv210_map_io(void)
@@ -85,6 +95,7 @@
 
 static void __init smdkv210_machine_init(void)
 {
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }
 
diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
new file mode 100644
index 0000000..a50cbac
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Base s5pv210 setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s5pv210_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	/* Set DISPLAY_CONTROL register for Display path selection.
+	 *
+	 * ouput   |   RGB   |   I80   |   ITU
+	 * -----------------------------------
+	 *  00     |   MIE   |  FIMD   |  FIMD
+	 *  01     | MDNIE   | MDNIE   |  FIMD
+	 *  10     |  FIMD   |  FIMD   |  FIMD
+	 *  11     |  FIMD   |  FIMD   |  FIMD
+	 */
+	writel(0x2, S5P_MDNIE_SEL);
+}
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index 9ec6845..c718253c 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5pv210/setup-i2c0.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * I2C0 GPIO configuration.
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <mach/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	/* Will be populated later */
+	s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
new file mode 100644
index 0000000..45e0e6e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c1.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
new file mode 100644
index 0000000..b11b4bf
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C2 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
new file mode 100644
index 0000000..fe7d86d
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -0,0 +1,104 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
+	for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+	switch (width) {
+	case 8:
+		/* GPG1[3:6] special-funtion 3 */
+		for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	case 4:
+		/* GPG0[3:6] special-funtion 2 */
+		for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	default:
+		break;
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+}
+
+void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG1[0:1] pins to special-function 2 */
+	for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Data pin GPG1[3:6] to special-function 2 */
+	for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG2[0:1] pins to special-function 2 */
+	for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	switch (width) {
+	case 8:
+		/* Data pin GPG3[3:6] to special-function 3 */
+		for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	case 4:
+		/* Data pin GPG2[3:6] to special-function 2 */
+		for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	default:
+		break;
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
new file mode 100644
index 0000000..51815ec
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s5pv210/setup-sdhci.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pv210_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",		/* HCLK */
+	[1] = "hsmmc",		/* HCLK */
+	[2] = "sclk_mmc",	/* mmc_bus */
+	/*[4] = reserved */
+};
+
+void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 92bd756..5cb2dd1 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,7 +7,7 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
+	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
 	default y
 	select ARM_VIC
 	select NO_IOPORT
@@ -24,3 +24,8 @@
 	select SAMSUNG_IRQ_UART
 	help
 	  Base platform code for Samsung's S5P series SoC.
+
+config S5P_EXT_INT
+	bool
+	help
+	  Use the external interrupts (other than GPIO interrupts.)
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 0ec09a9..25941a5 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -16,3 +16,5 @@
 obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= irq.o
+obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
+obj-y				+= setup-i2c0.o
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index f92e5de..75cb8c3 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -19,12 +19,14 @@
 #include <plat/cpu.h>
 #include <plat/s5p6440.h>
 #include <plat/s5p6442.h>
+#include <plat/s5pc100.h>
 #include <plat/s5pv210.h>
 
 /* table of supported CPUs */
 
 static const char name_s5p6440[] = "S5P6440";
 static const char name_s5p6442[] = "S5P6442";
+static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
 
 static struct cpu_table cpu_ids[] __initdata = {
@@ -45,6 +47,14 @@
 		.init		= s5p6442_init,
 		.name		= name_s5p6442,
 	}, {
+		.idcode		= 0x43100000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	}, {
 		.idcode		= 0x43110000,
 		.idmask		= 0xfffff000,
 		.map_io		= s5pv210_map_io,
diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-s5p/include/plat/s5pc100.h
new file mode 100644
index 0000000..5f6099d
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pc100.h
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5pc100.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern  int s5pc100_init(void);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
new file mode 100644
index 0000000..eaa70aa
--- /dev/null
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -0,0 +1,213 @@
+/* linux/arch/arm/plat-s5p/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+
+static inline void s5p_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask &= ~(eint_irq_to_bit(irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static inline void s5p_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s5p_irq_eint_mask(irq);
+	s5p_irq_eint_ack(irq);
+}
+
+static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = eint_offset(irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+
+	if ((0 <= offs) && (offs < 8))
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+
+	else if ((8 <= offs) && (offs < 16))
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+
+	else if ((16 <= offs) && (offs < 24))
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+
+	else if ((24 <= offs) && (offs < 32))
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+
+	else
+		printk(KERN_ERR "No such irq number %d", offs);
+
+	return 0;
+}
+
+static struct irq_chip s5p_irq_eint = {
+	.name		= "s5p-eint",
+	.mask		= s5p_irq_eint_mask,
+	.unmask		= s5p_irq_eint_unmask,
+	.mask_ack	= s5p_irq_eint_maskack,
+	.ack		= s5p_irq_eint_ack,
+	.set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/* s5p_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from EINTs 16 to 31. It is designed to be inlined into the specific
+ * handler s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5p_irq_demux_eint(unsigned int start)
+{
+	u32 status;
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+	unsigned int irq;
+
+	status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status);
+		generic_handle_irq(irq - 1 + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s5p_irq_demux_eint(IRQ_EINT(16));
+	s5p_irq_demux_eint(IRQ_EINT(24));
+}
+
+static inline void s5p_irq_vic_eint_mask(unsigned int irq)
+{
+	s5p_irq_eint_mask(irq);
+}
+
+static void s5p_irq_vic_eint_unmask(unsigned int irq)
+{
+	s5p_irq_eint_unmask(irq);
+}
+
+static inline void s5p_irq_vic_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_vic_eint_maskack(unsigned int irq)
+{
+	s5p_irq_vic_eint_mask(irq);
+	s5p_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s5p_irq_vic_eint = {
+	.name		= "s5p_vic_eint",
+	.mask		= s5p_irq_vic_eint_mask,
+	.unmask		= s5p_irq_vic_eint_unmask,
+	.mask_ack	= s5p_irq_vic_eint_maskack,
+	.ack		= s5p_irq_vic_eint_ack,
+	.set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+int __init s5p_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
+		set_irq_chip(irq, &s5p_irq_vic_eint);
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		set_irq_chip(irq, &s5p_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
+	return 0;
+}
+
+arch_initcall(s5p_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
deleted file mode 100644
index c7bd2bb..0000000
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-#	Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-config PLAT_S5PC1XX
-	bool
-	depends on ARCH_S5PC1XX
-	default y
-	select PLAT_S3C
-	select ARM_VIC
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select SAMSUNG_CLKSRC
-	select SAMSUNG_IRQ_UART
-	select SAMSUNG_IRQ_VIC_TIMER
-	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S5P_GPIO_DRVSTR
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
-	select SAMSUNG_GPIOLIB_4BIT
-	help
-	  Base platform code for any Samsung S5PC1XX device
-
-if PLAT_S5PC1XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S5PC100_INIT
-	bool
-	help
-	  Common initialisation code for the S5PC1XX
-
-config CPU_S5PC100_CLOCK
-	bool
-	help
-	  Common clock support code for the S5PC1XX
-
-# platform specific device setup
-
-config S5PC1XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
deleted file mode 100644
index 9ce6409..0000000
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-# arch/arm/plat-s5pc1xx/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Core files
-
-obj-y				+= dev-uart.o
-obj-y				+= cpu.o
-obj-y				+= irq.o
-obj-y				+= clock.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5PC100_INIT)	+= s5pc100-init.o
-obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
-
-# Device setup
-
-obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
deleted file mode 100644
index 387f231..0000000
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ /dev/null
@@ -1,709 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/clock.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * S5PC1XX Base clock support
- *
- * Based on plat-s3c64xx/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-clock.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5PC100_CLKSRC1);
-	if (enable)
-		val |= S5PC100_CLKSRC1_CLK48M_MASK;
-	else
-		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
-	__raw_writel(val, S5PC100_CLKSRC1);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
-	.name		= "clk_54m",
-	.id		= -1,
-	.rate		= 54000000,
-};
-
-struct clk clk_hd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-struct clk clk_pd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk s5pc100_init_clocks_disable[] = {
-	{
-		.name		= "dsi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
-	}, {
-		.name		= "csi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
-	}, {
-		.name		= "ccan",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
-	}, {
-		.name		= "ccan",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
-	}, {
-		.name		= "keypad",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "hclkd2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
-	}, {
-		.name		= "iis-d2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
-	},
-};
-
-static struct clk s5pc100_init_clocks[] = {
-	/* System1 (D0_0) devices */
-	{
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
-	}, {
-		.name		= "tzic",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
-	}, {
-		.name		= "cf-ata",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
-	}, {
-		.name		= "mdma",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
-	}, {
-		.name		= "g2d",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
-	}, {
-		.name		= "secss",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
-	}, {
-		.name		= "cssys",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
-	},
-
-	/* Memory (D0_1) devices */
-	{
-		.name		= "dmc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
-	}, {
-		.name		= "sromc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
-	}, {
-		.name		= "onenand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
-	}, {
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
-	}, {
-		.name		= "intmem",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
-	}, {
-		.name		= "ebi",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
-	},
-
-	/* System2 (D0_2) devices */
-	{
-		.name		= "seckey",
-		.id		= -1,
-		.parent		= &clk_pd0,
-		.enable		= s5pc100_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
-	}, {
-		.name		= "sdm",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
-	},
-
-	/* File (D1_0) devices */
-	{
-		.name		= "pdma",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
-	}, {
-		.name		= "pdma",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
-	}, {
-		.name		= "otg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
-	}, {
-		.name		= "modem",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
-	},
-
-	/* Multimedia1 (D1_1) devices */
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
-	}, {
-		.name		= "rotator",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
-	}, {
-		.name		= "jpeg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
-	}, {
-		.name		= "g3d",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
-	},
-
-	/* Multimedia2 (D1_2) devices */
-	{
-		.name		= "tv",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
-	}, {
-		.name		= "vp",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
-	}, {
-		.name		= "mixer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
-	}, {
-		.name		= "hdmi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
-	}, {
-		.name		= "mfc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
-	},
-
-	/* System (D1_3) devices */
-	{
-		.name		= "chipid",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
-	}, {
-		.name		= "apc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
-	}, {
-		.name		= "iec",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
-	}, {
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
-	},
-
-	/* Connectivity (D1_4) devices */
-	{
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
-	}, {
-		.name		= "hdmi-i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
-	}, {
-		.name		= "spi",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
-	}, {
-		.name		= "irda",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
-	}, {
-		.name		= "hsitx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
-	}, {
-		.name		= "hsirx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
-	},
-
-	/* Audio (D1_5) devices */
-	{
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
-	}, {
-		.name		= "iis",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
-	}, {
-		.name		= "pcm",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
-	}, {
-		.name		= "pcm",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
-	}, {
-		.name		= "spdif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
-	}, {
-		.name		= "cg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
-	},
-
-	/* Audio (D2_0) devices: all disabled */
-
-	/* Special Clocks 0 */
-	{
-		.name		= "sclk_hpm",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_HPM,
-	}, {
-		.name		= "sclk_onenand",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
-	}, {
-		.name		= "spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
-	}, {
-		.name		= "spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
-	}, {
-		.name		= "spi_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
-	},
-	/* Special Clocks 1 */
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_pd0,
-	&clk_hd0,
-	&clk_27m,
-	&clk_48m,
-	&clk_54m,
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-	int size;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clocks(s5pc100_init_clocks,
-			    ARRAY_SIZE(s5pc100_init_clocks));
-
-	clkp = s5pc100_init_clocks_disable;
-	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
-
-	for (ptr = 0; ptr < size; ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
deleted file mode 100644
index 02baeaa..0000000
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/cpu.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX CPU Support
- *
- * Based on plat-s3c64xx/cpu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s5pc100.h>
-
-/* table of supported CPUs */
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x43100000,
-		.idmask		= 0xfffff000,
-		.map_io		= s5pc100_map_io,
-		.init_clocks	= s5pc100_init_clocks,
-		.init_uarts	= s5pc100_init_uarts,
-		.init		= s5pc100_init,
-		.name		= name_s5pc100,
-	},
-};
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xffff)
-
-static struct map_desc s5pc1xx_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5PC1XX_VA_CLK_OTHER,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
-		.length		= SZ_16,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_CLK,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_PWR,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_PWR),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)(S5PC1XX_VA_UART),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(0),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(0)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(1),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(1)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(2),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(2)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_TIMER,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_TIMER),
-		.length		= SZ_256,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* read cpu identification code */
-
-void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
-{
-	unsigned long idcode;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
-	iotable_init(mach_desc, size);
-
-	idcode = __raw_readl(S5PC1XX_VA_CHIPID);
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
deleted file mode 100644
index 586c95c..0000000
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Based on plat-s3c64xx/dev-uart.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s5pc1xx_uart0_resource[] = {
-	[0] = {
-		.start	= S3C_PA_UART0,
-		.end	= S3C_PA_UART0 + 0x100,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX0,
-		.end	= IRQ_S3CUART_RX0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX0,
-		.end	= IRQ_S3CUART_TX0,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR0,
-		.end	= IRQ_S3CUART_ERR0,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s5pc1xx_uart1_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART1,
-		.end   = S3C_PA_UART1 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX1,
-		.end	= IRQ_S3CUART_RX1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX1,
-		.end	= IRQ_S3CUART_TX1,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR1,
-		.end	= IRQ_S3CUART_ERR1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5pc1xx_uart2_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART2,
-		.end   = S3C_PA_UART2 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX2,
-		.end	= IRQ_S3CUART_RX2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX2,
-		.end	= IRQ_S3CUART_TX2,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR2,
-		.end	= IRQ_S3CUART_ERR2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5pc1xx_uart3_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART3,
-		.end   = S3C_PA_UART3 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX3,
-		.end	= IRQ_S3CUART_RX3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX3,
-		.end	= IRQ_S3CUART_TX3,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR3,
-		.end	= IRQ_S3CUART_ERR3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s5pc1xx_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart0_resource),
-	},
-	[1] = {
-		.resources	= s5pc1xx_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart1_resource),
-	},
-	[2] = {
-		.resources	= s5pc1xx_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart2_resource),
-	},
-	[3] = {
-		.resources	= s5pc1xx_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
-	},
-};
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
deleted file mode 100644
index 33ad267..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * External Interrupt (GPH0 ~ GPH3) control register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PC1XX_WKUP_INT_CON0_7		(S5PC1XX_EINT_BASE + 0x0)
-#define S5PC1XX_WKUP_INT_CON8_15	(S5PC1XX_EINT_BASE + 0x4)
-#define S5PC1XX_WKUP_INT_CON16_23	(S5PC1XX_EINT_BASE + 0x8)
-#define S5PC1XX_WKUP_INT_CON24_31	(S5PC1XX_EINT_BASE + 0xC)
-#define S5PC1XX_WKUP_INT_CON(x)		(S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_FLTCON0_3	(S5PC1XX_EINT_BASE + 0x80)
-#define S5PC1XX_WKUP_INT_FLTCON4_7	(S5PC1XX_EINT_BASE + 0x84)
-#define S5PC1XX_WKUP_INT_FLTCON8_11	(S5PC1XX_EINT_BASE + 0x88)
-#define S5PC1XX_WKUP_INT_FLTCON12_15	(S5PC1XX_EINT_BASE + 0x8C)
-#define S5PC1XX_WKUP_INT_FLTCON16_19	(S5PC1XX_EINT_BASE + 0x90)
-#define S5PC1XX_WKUP_INT_FLTCON20_23	(S5PC1XX_EINT_BASE + 0x94)
-#define S5PC1XX_WKUP_INT_FLTCON24_27	(S5PC1XX_EINT_BASE + 0x98)
-#define S5PC1XX_WKUP_INT_FLTCON28_31	(S5PC1XX_EINT_BASE + 0x9C)
-#define S5PC1XX_WKUP_INT_FLTCON(x)	(S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_MASK0_7	(S5PC1XX_EINT_BASE + 0x100)
-#define S5PC1XX_WKUP_INT_MASK8_15	(S5PC1XX_EINT_BASE + 0x104)
-#define S5PC1XX_WKUP_INT_MASK16_23	(S5PC1XX_EINT_BASE + 0x108)
-#define S5PC1XX_WKUP_INT_MASK24_31	(S5PC1XX_EINT_BASE + 0x10C)
-#define S5PC1XX_WKUP_INT_MASK(x)	(S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_PEND0_7	(S5PC1XX_EINT_BASE + 0x140)
-#define S5PC1XX_WKUP_INT_PEND8_15	(S5PC1XX_EINT_BASE + 0x144)
-#define S5PC1XX_WKUP_INT_PEND16_23	(S5PC1XX_EINT_BASE + 0x148)
-#define S5PC1XX_WKUP_INT_PEND24_31	(S5PC1XX_EINT_BASE + 0x14C)
-#define S5PC1XX_WKUP_INT_PEND(x)	(S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_LOWLEV		(0x00)
-#define S5PC1XX_WKUP_INT_HILEV		(0x01)
-#define S5PC1XX_WKUP_INT_FALLEDGE	(0x02)
-#define S5PC1XX_WKUP_INT_RISEEDGE	(0x03)
-#define S5PC1XX_WKUP_INT_BOTHEDGE	(0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
deleted file mode 100644
index 409c8043..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Common IRQ support
- *
- * Based on plat-s3c64xx/include/plat/irqs.h
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
-#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET		(32)
-
-#define S3C_IRQ(x)		((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE		S3C_IRQ(0)
-#define S3C_VIC1_BASE		S3C_IRQ(32)
-#define S3C_VIC2_BASE		S3C_IRQ(64)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0	(16)
-#define IRQ_S3CUART_BASE1	(20)
-#define IRQ_S3CUART_BASE2	(24)
-#define IRQ_S3CUART_BASE3	(28)
-
-#define UART_IRQ_RXD		(0)
-#define UART_IRQ_ERR		(1)
-#define UART_IRQ_TXD		(2)
-#define UART_IRQ_MODEM		(3)
-
-#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S5PC1XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
-#define S5PC1XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
-#define S5PC1XX_IRQ_VIC2(x)	(S3C_VIC2_BASE + (x))
-
-/*
- * VIC0: system, DMA, timer
- */
-#define IRQ_EINT0		S5PC1XX_IRQ_VIC0(0)
-#define IRQ_EINT1		S5PC1XX_IRQ_VIC0(1)
-#define IRQ_EINT2		S5PC1XX_IRQ_VIC0(2)
-#define IRQ_EINT3		S5PC1XX_IRQ_VIC0(3)
-#define IRQ_EINT4		S5PC1XX_IRQ_VIC0(4)
-#define IRQ_EINT5		S5PC1XX_IRQ_VIC0(5)
-#define IRQ_EINT6		S5PC1XX_IRQ_VIC0(6)
-#define IRQ_EINT7		S5PC1XX_IRQ_VIC0(7)
-#define IRQ_EINT8		S5PC1XX_IRQ_VIC0(8)
-#define IRQ_EINT9		S5PC1XX_IRQ_VIC0(9)
-#define IRQ_EINT10		S5PC1XX_IRQ_VIC0(10)
-#define IRQ_EINT11		S5PC1XX_IRQ_VIC0(11)
-#define IRQ_EINT12		S5PC1XX_IRQ_VIC0(12)
-#define IRQ_EINT13		S5PC1XX_IRQ_VIC0(13)
-#define IRQ_EINT14		S5PC1XX_IRQ_VIC0(14)
-#define IRQ_EINT15		S5PC1XX_IRQ_VIC0(15)
-#define IRQ_EINT16_31		S5PC1XX_IRQ_VIC0(16)
-#define IRQ_BATF		S5PC1XX_IRQ_VIC0(17)
-#define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
-#define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
-#define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC		S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC		S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC		S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC		S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC		S5PC1XX_IRQ_VIC0(25)
-#define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
-#define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
-#define IRQ_RTC_TIC		S5PC1XX_IRQ_VIC0(29)
-#define IRQ_GPIOINT		S5PC1XX_IRQ_VIC0(30)
-
-/*
- * VIC1: ARM, power, memory, connectivity
- */
-#define IRQ_CORTEX0		S5PC1XX_IRQ_VIC1(0)
-#define IRQ_CORTEX1		S5PC1XX_IRQ_VIC1(1)
-#define IRQ_CORTEX2		S5PC1XX_IRQ_VIC1(2)
-#define IRQ_CORTEX3		S5PC1XX_IRQ_VIC1(3)
-#define IRQ_CORTEX4		S5PC1XX_IRQ_VIC1(4)
-#define IRQ_IEMAPC		S5PC1XX_IRQ_VIC1(5)
-#define IRQ_IEMIEC		S5PC1XX_IRQ_VIC1(6)
-#define IRQ_ONENAND		S5PC1XX_IRQ_VIC1(7)
-#define IRQ_NFC			S5PC1XX_IRQ_VIC1(8)
-#define IRQ_CFC			S5PC1XX_IRQ_VIC1(9)
-#define IRQ_UART0		S5PC1XX_IRQ_VIC1(10)
-#define IRQ_UART1		S5PC1XX_IRQ_VIC1(11)
-#define IRQ_UART2		S5PC1XX_IRQ_VIC1(12)
-#define IRQ_UART3		S5PC1XX_IRQ_VIC1(13)
-#define IRQ_IIC			S5PC1XX_IRQ_VIC1(14)
-#define IRQ_SPI0		S5PC1XX_IRQ_VIC1(15)
-#define IRQ_SPI1		S5PC1XX_IRQ_VIC1(16)
-#define IRQ_SPI2		S5PC1XX_IRQ_VIC1(17)
-#define IRQ_IRDA		S5PC1XX_IRQ_VIC1(18)
-#define IRQ_CAN0		S5PC1XX_IRQ_VIC1(19)
-#define IRQ_CAN1		S5PC1XX_IRQ_VIC1(20)
-#define IRQ_HSIRX		S5PC1XX_IRQ_VIC1(21)
-#define IRQ_HSITX		S5PC1XX_IRQ_VIC1(22)
-#define IRQ_UHOST		S5PC1XX_IRQ_VIC1(23)
-#define IRQ_OTG			S5PC1XX_IRQ_VIC1(24)
-#define IRQ_MSM			S5PC1XX_IRQ_VIC1(25)
-#define IRQ_HSMMC0		S5PC1XX_IRQ_VIC1(26)
-#define IRQ_HSMMC1		S5PC1XX_IRQ_VIC1(27)
-#define IRQ_HSMMC2		S5PC1XX_IRQ_VIC1(28)
-#define IRQ_MIPICSI		S5PC1XX_IRQ_VIC1(29)
-#define IRQ_MIPIDSI		S5PC1XX_IRQ_VIC1(30)
-
-/*
- * VIC2: multimedia, audio, security
- */
-#define IRQ_LCD0		S5PC1XX_IRQ_VIC2(0)
-#define IRQ_LCD1		S5PC1XX_IRQ_VIC2(1)
-#define IRQ_LCD2		S5PC1XX_IRQ_VIC2(2)
-#define IRQ_LCD3		S5PC1XX_IRQ_VIC2(3)
-#define IRQ_ROTATOR		S5PC1XX_IRQ_VIC2(4)
-#define IRQ_FIMC0		S5PC1XX_IRQ_VIC2(5)
-#define IRQ_FIMC1		S5PC1XX_IRQ_VIC2(6)
-#define IRQ_FIMC2		S5PC1XX_IRQ_VIC2(7)
-#define IRQ_JPEG		S5PC1XX_IRQ_VIC2(8)
-#define IRQ_2D			S5PC1XX_IRQ_VIC2(9)
-#define IRQ_3D			S5PC1XX_IRQ_VIC2(10)
-#define IRQ_MIXER		S5PC1XX_IRQ_VIC2(11)
-#define IRQ_HDMI		S5PC1XX_IRQ_VIC2(12)
-#define IRQ_IIC1		S5PC1XX_IRQ_VIC2(13)
-#define IRQ_MFC			S5PC1XX_IRQ_VIC2(14)
-#define IRQ_TVENC		S5PC1XX_IRQ_VIC2(15)
-#define IRQ_I2S0		S5PC1XX_IRQ_VIC2(16)
-#define IRQ_I2S1		S5PC1XX_IRQ_VIC2(17)
-#define IRQ_I2S2		S5PC1XX_IRQ_VIC2(18)
-#define IRQ_AC97		S5PC1XX_IRQ_VIC2(19)
-#define IRQ_PCM0		S5PC1XX_IRQ_VIC2(20)
-#define IRQ_PCM1		S5PC1XX_IRQ_VIC2(21)
-#define IRQ_SPDIF		S5PC1XX_IRQ_VIC2(22)
-#define IRQ_ADC			S5PC1XX_IRQ_VIC2(23)
-#define IRQ_PENDN		S5PC1XX_IRQ_VIC2(24)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_KEYPAD		S5PC1XX_IRQ_VIC2(25)
-#define IRQ_CG			S5PC1XX_IRQ_VIC2(26)
-#define IRQ_SEC			S5PC1XX_IRQ_VIC2(27)
-#define IRQ_SECRX		S5PC1XX_IRQ_VIC2(28)
-#define IRQ_SECTX		S5PC1XX_IRQ_VIC2(29)
-#define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
-#define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
-
-#define IRQ_TIMER(x)		(IRQ_SDMFIQ + 1 + (x))
-#define IRQ_TIMER0		IRQ_TIMER(0)
-#define IRQ_TIMER1		IRQ_TIMER(1)
-#define IRQ_TIMER2		IRQ_TIMER(2)
-#define IRQ_TIMER3		IRQ_TIMER(3)
-#define IRQ_TIMER4		IRQ_TIMER(4)
-
-/* External interrupt */
-#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 6)
-
-#define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
-#define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
-#define IRQ_EINT_BIT(x)		(x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-
-/* GPIO interrupt */
-#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
-
-/*
- * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
- */
-#define NR_IRQS			(S3C_IRQ_GPIO(320) + 1)
-
-#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
-
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
deleted file mode 100644
index 21afef1..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/pll.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/pll.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX PLL code
- *
- * Based on plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5P_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S5P_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S5P_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S5P_PLL_MDIV_SHIFT	(16)
-#define S5P_PLL_PDIV_SHIFT	(8)
-#define S5P_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
deleted file mode 100644
index 24dec4e..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S5PC100_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
-#define S5PC100_CLKREG_OTHER(x)		(S5PC1XX_VA_CLK_OTHER + (x))
-
-/* s5pc100 register for clock */
-#define S5PC100_APLL_LOCK		S5PC100_CLKREG(0x00)
-#define S5PC100_MPLL_LOCK		S5PC100_CLKREG(0x04)
-#define S5PC100_EPLL_LOCK		S5PC100_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK		S5PC100_CLKREG(0x0C)
-
-#define S5PC100_APLL_CON		S5PC100_CLKREG(0x100)
-#define S5PC100_MPLL_CON		S5PC100_CLKREG(0x104)
-#define S5PC100_EPLL_CON		S5PC100_CLKREG(0x108)
-#define S5PC100_HPLL_CON		S5PC100_CLKREG(0x10C)
-
-#define S5PC100_CLKSRC0			S5PC100_CLKREG(0x200)
-#define S5PC100_CLKSRC1			S5PC100_CLKREG(0x204)
-#define S5PC100_CLKSRC2			S5PC100_CLKREG(0x208)
-#define S5PC100_CLKSRC3			S5PC100_CLKREG(0x20C)
-
-#define S5PC100_CLKDIV0			S5PC100_CLKREG(0x300)
-#define S5PC100_CLKDIV1			S5PC100_CLKREG(0x304)
-#define S5PC100_CLKDIV2			S5PC100_CLKREG(0x308)
-#define S5PC100_CLKDIV3			S5PC100_CLKREG(0x30C)
-#define S5PC100_CLKDIV4			S5PC100_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT			S5PC100_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00		S5PC100_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01		S5PC100_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02		S5PC100_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10		S5PC100_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11		S5PC100_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12		S5PC100_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13		S5PC100_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14		S5PC100_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15		S5PC100_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20		S5PC100_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0		S5PC100_CLKREG(0x560)
-#define S5PC100_SCLKGATE1		S5PC100_CLKREG(0x564)
-
-/* EPLL_CON */
-#define S5PC100_EPLL_EN			(1<<31)
-#define S5PC100_EPLL_MASK		0xffffffff
-#define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
-#define S5PC100_CLKSRC1_CLK48M_MASK	(0x1<<24)
-#define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
-
-/* CLKDIV0 */
-#define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
-#define S5PC100_CLKDIV0_APLL_SHIFT		(0)
-#define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
-#define S5PC100_CLKDIV0_ARM_SHIFT		(4)
-#define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
-#define S5PC100_CLKDIV0_D0_SHIFT		(8)
-#define S5PC100_CLKDIV0_PCLKD0_MASK		(0x7<<12)
-#define S5PC100_CLKDIV0_PCLKD0_SHIFT	(12)
-#define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
-#define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
-
-/* CLKDIV1 (OneNAND clock only used in one place, removed) */
-#define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
-#define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
-#define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
-#define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
-#define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
-#define S5PC100_CLKDIV1_MPLL2_SHIFT		(8)
-#define S5PC100_CLKDIV1_D1_MASK		(0x7<<12)
-#define S5PC100_CLKDIV1_D1_SHIFT		(12)
-#define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
-#define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
-#define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
-#define S5PC100_CLKDIV1_CAM_SHIFT		(24)
-
-/* CLKDIV2 => removed in clksrc update */
-/* CLKDIV3 => removed in clksrc update, or not needed */
-/* CLKDIV4 => removed in clksrc update, or not needed */
-
-/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D00_INTC		(1<<0)
-#define S5PC100_CLKGATE_D00_TZIC		(1<<1)
-#define S5PC100_CLKGATE_D00_CFCON		(1<<2)
-#define S5PC100_CLKGATE_D00_MDMA		(1<<3)
-#define S5PC100_CLKGATE_D00_G2D		(1<<4)
-#define S5PC100_CLKGATE_D00_SECSS		(1<<5)
-#define S5PC100_CLKGATE_D00_CSSYS		(1<<6)
-
-/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D01_DMC		(1<<0)
-#define S5PC100_CLKGATE_D01_SROMC		(1<<1)
-#define S5PC100_CLKGATE_D01_ONENAND		(1<<2)
-#define S5PC100_CLKGATE_D01_NFCON		(1<<3)
-#define S5PC100_CLKGATE_D01_INTMEM		(1<<4)
-#define S5PC100_CLKGATE_D01_EBI		(1<<5)
-
-/* PCLKD0 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D02_SECKEY		(1<<1)
-#define S5PC100_CLKGATE_D02_SDM		(1<<2)
-
-/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D10_PDMA0		(1<<0)
-#define S5PC100_CLKGATE_D10_PDMA1		(1<<1)
-#define S5PC100_CLKGATE_D10_USBHOST		(1<<2)
-#define S5PC100_CLKGATE_D10_USBOTG		(1<<3)
-#define S5PC100_CLKGATE_D10_MODEMIF		(1<<4)
-#define S5PC100_CLKGATE_D10_HSMMC0		(1<<5)
-#define S5PC100_CLKGATE_D10_HSMMC1		(1<<6)
-#define S5PC100_CLKGATE_D10_HSMMC2		(1<<7)
-
-/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D11_LCD		(1<<0)
-#define S5PC100_CLKGATE_D11_ROTATOR		(1<<1)
-#define S5PC100_CLKGATE_D11_FIMC0		(1<<2)
-#define S5PC100_CLKGATE_D11_FIMC1		(1<<3)
-#define S5PC100_CLKGATE_D11_FIMC2		(1<<4)
-#define S5PC100_CLKGATE_D11_JPEG		(1<<5)
-#define S5PC100_CLKGATE_D11_DSI		(1<<6)
-#define S5PC100_CLKGATE_D11_CSI		(1<<7)
-#define S5PC100_CLKGATE_D11_G3D		(1<<8)
-
-/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D12_TV		(1<<0)
-#define S5PC100_CLKGATE_D12_VP		(1<<1)
-#define S5PC100_CLKGATE_D12_MIXER		(1<<2)
-#define S5PC100_CLKGATE_D12_HDMI		(1<<3)
-#define S5PC100_CLKGATE_D12_MFC		(1<<4)
-
-/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
-#define S5PC100_CLKGATE_D13_CHIPID		(1<<0)
-#define S5PC100_CLKGATE_D13_GPIO		(1<<1)
-#define S5PC100_CLKGATE_D13_APC		(1<<2)
-#define S5PC100_CLKGATE_D13_IEC		(1<<3)
-#define S5PC100_CLKGATE_D13_PWM		(1<<6)
-#define S5PC100_CLKGATE_D13_SYSTIMER	(1<<7)
-#define S5PC100_CLKGATE_D13_WDT		(1<<8)
-#define S5PC100_CLKGATE_D13_RTC		(1<<9)
-
-/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
-#define S5PC100_CLKGATE_D14_UART0		(1<<0)
-#define S5PC100_CLKGATE_D14_UART1		(1<<1)
-#define S5PC100_CLKGATE_D14_UART2		(1<<2)
-#define S5PC100_CLKGATE_D14_UART3		(1<<3)
-#define S5PC100_CLKGATE_D14_IIC		(1<<4)
-#define S5PC100_CLKGATE_D14_HDMI_IIC	(1<<5)
-#define S5PC100_CLKGATE_D14_SPI0		(1<<6)
-#define S5PC100_CLKGATE_D14_SPI1		(1<<7)
-#define S5PC100_CLKGATE_D14_SPI2		(1<<8)
-#define S5PC100_CLKGATE_D14_IRDA		(1<<9)
-#define S5PC100_CLKGATE_D14_CCAN0		(1<<10)
-#define S5PC100_CLKGATE_D14_CCAN1		(1<<11)
-#define S5PC100_CLKGATE_D14_HSITX		(1<<12)
-#define S5PC100_CLKGATE_D14_HSIRX		(1<<13)
-
-/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
-#define S5PC100_CLKGATE_D15_IIS0		(1<<0)
-#define S5PC100_CLKGATE_D15_IIS1		(1<<1)
-#define S5PC100_CLKGATE_D15_IIS2		(1<<2)
-#define S5PC100_CLKGATE_D15_AC97		(1<<3)
-#define S5PC100_CLKGATE_D15_PCM0		(1<<4)
-#define S5PC100_CLKGATE_D15_PCM1		(1<<5)
-#define S5PC100_CLKGATE_D15_SPDIF		(1<<6)
-#define S5PC100_CLKGATE_D15_TSADC		(1<<7)
-#define S5PC100_CLKGATE_D15_KEYIF		(1<<8)
-#define S5PC100_CLKGATE_D15_CG		(1<<9)
-
-/* HCLKD2 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D20_HCLKD2		(1<<0)
-#define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
-
-/* Special Clock Gate 0 Registers */
-#define	S5PC100_CLKGATE_SCLK0_HPM		(1<<0)
-#define	S5PC100_CLKGATE_SCLK0_PWI		(1<<1)
-#define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
-#define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
-#define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
-#define	S5PC100_CLKGATE_SCLK0_SPI1		(1<<5)
-#define	S5PC100_CLKGATE_SCLK0_SPI2		(1<<6)
-#define	S5PC100_CLKGATE_SCLK0_SPI0_48	(1<<7)
-#define	S5PC100_CLKGATE_SCLK0_SPI1_48	(1<<8)
-#define	S5PC100_CLKGATE_SCLK0_SPI2_48	(1<<9)
-#define	S5PC100_CLKGATE_SCLK0_IRDA		(1<<10)
-#define	S5PC100_CLKGATE_SCLK0_USBHOST	(1<<11)
-#define	S5PC100_CLKGATE_SCLK0_MMC0		(1<<12)
-#define	S5PC100_CLKGATE_SCLK0_MMC1		(1<<13)
-#define	S5PC100_CLKGATE_SCLK0_MMC2		(1<<14)
-#define	S5PC100_CLKGATE_SCLK0_MMC0_48	(1<<15)
-#define	S5PC100_CLKGATE_SCLK0_MMC1_48	(1<<16)
-#define	S5PC100_CLKGATE_SCLK0_MMC2_48	(1<<17)
-
-/* Special Clock Gate 1 Registers */
-#define	S5PC100_CLKGATE_SCLK1_LCD		(1<<0)
-#define	S5PC100_CLKGATE_SCLK1_FIMC0		(1<<1)
-#define	S5PC100_CLKGATE_SCLK1_FIMC1		(1<<2)
-#define	S5PC100_CLKGATE_SCLK1_FIMC2		(1<<3)
-#define	S5PC100_CLKGATE_SCLK1_TV54		(1<<4)
-#define	S5PC100_CLKGATE_SCLK1_VDAC54	(1<<5)
-#define	S5PC100_CLKGATE_SCLK1_MIXER		(1<<6)
-#define	S5PC100_CLKGATE_SCLK1_HDMI		(1<<7)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO0	(1<<8)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO1	(1<<9)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO2	(1<<10)
-#define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
-#define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
-
-#define S5PC100_SWRESET		S5PC100_CLKREG_OTHER(0x000)
-#define S5PC100_OND_SWRESET	S5PC100_CLKREG_OTHER(0x008)
-#define S5PC100_GEN_CTRL	S5PC100_CLKREG_OTHER(0x100)
-#define S5PC100_GEN_STATUS	S5PC100_CLKREG_OTHER(0x104)
-#define S5PC100_MEM_SYS_CFG	S5PC100_CLKREG_OTHER(0x200)
-#define S5PC100_CAM_MUX_SEL	S5PC100_CLKREG_OTHER(0x300)
-#define S5PC100_MIXER_OUT_SEL	S5PC100_CLKREG_OTHER(0x304)
-#define S5PC100_LPMP_MODE_SEL	S5PC100_CLKREG_OTHER(0x308)
-#define S5PC100_MIPI_PHY_CON0	S5PC100_CLKREG_OTHER(0x400)
-#define S5PC100_MIPI_PHY_CON1	S5PC100_CLKREG_OTHER(0x414)
-#define S5PC100_HDMI_PHY_CON0	S5PC100_CLKREG_OTHER(0x420)
-
-#define S5PC100_SWRESET_RESETVAL	0xc100
-#define S5PC100_OTHER_SYS_INT	24
-#define S5PC100_OTHER_STA_TYPE	23
-#define STA_TYPE_EXPON		0
-#define STA_TYPE_SFR		1
-
-#define S5PC100_SLEEP_CFG_OSC_EN	0
-
-/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK	(1 << 16)
-#define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
-
-/* MIPI D-PHY Control Register 0 */
-#define S5PC100_MIPI_PHY_CON0_M_RESETN	(1 << 1)
-#define S5PC100_MIPI_PHY_CON0_S_RESETN	(1 << 0)
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
deleted file mode 100644
index 02ffa49..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Jongse Won <jongse.won@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S5PC1XX_PWRREG(x)			(S5PC1XX_VA_PWR + (x))
-
-/* s5pc100 (0xE0108000) register for power management */
-#define S5PC100_PWR_CFG				S5PC1XX_PWRREG(0x0)
-#define S5PC100_EINT_WAKEUP_MASK		S5PC1XX_PWRREG(0x4)
-#define S5PC100_NORMAL_CFG			S5PC1XX_PWRREG(0x10)
-#define S5PC100_STOP_CFG			S5PC1XX_PWRREG(0x14)
-#define S5PC100_SLEEP_CFG			S5PC1XX_PWRREG(0x18)
-#define S5PC100_STOP_MEM_CFG			S5PC1XX_PWRREG(0x1C)
-#define S5PC100_OSC_FREQ			S5PC1XX_PWRREG(0x100)
-#define S5PC100_OSC_STABLE			S5PC1XX_PWRREG(0x104)
-#define S5PC100_PWR_STABLE			S5PC1XX_PWRREG(0x108)
-#define S5PC100_MTC_STABLE			S5PC1XX_PWRREG(0x110)
-#define S5PC100_CLAMP_STABLE			S5PC1XX_PWRREG(0x114)
-#define S5PC100_OTHERS				S5PC1XX_PWRREG(0x200)
-#define S5PC100_RST_STAT			S5PC1XX_PWRREG(0x300)
-#define S5PC100_WAKEUP_STAT			S5PC1XX_PWRREG(0x304)
-#define S5PC100_BLK_PWR_STAT			S5PC1XX_PWRREG(0x308)
-#define S5PC100_INFORM0				S5PC1XX_PWRREG(0x400)
-#define S5PC100_INFORM1				S5PC1XX_PWRREG(0x404)
-#define S5PC100_INFORM2				S5PC1XX_PWRREG(0x408)
-#define S5PC100_INFORM3				S5PC1XX_PWRREG(0x40C)
-#define S5PC100_INFORM4				S5PC1XX_PWRREG(0x410)
-#define S5PC100_INFORM5				S5PC1XX_PWRREG(0x414)
-#define S5PC100_INFORM6				S5PC1XX_PWRREG(0x418)
-#define S5PC100_INFORM7				S5PC1XX_PWRREG(0x41C)
-#define S5PC100_DCGIDX_MAP0			S5PC1XX_PWRREG(0x500)
-#define S5PC100_DCGIDX_MAP1			S5PC1XX_PWRREG(0x504)
-#define S5PC100_DCGIDX_MAP2			S5PC1XX_PWRREG(0x508)
-#define S5PC100_DCGPERF_MAP0			S5PC1XX_PWRREG(0x50C)
-#define S5PC100_DCGPERF_MAP1			S5PC1XX_PWRREG(0x510)
-#define S5PC100_DVCIDX_MAP			S5PC1XX_PWRREG(0x514)
-#define S5PC100_FREQ_CPU			S5PC1XX_PWRREG(0x518)
-#define S5PC100_FREQ_DPM			S5PC1XX_PWRREG(0x51C)
-#define S5PC100_DVSEMCLK_EN			S5PC1XX_PWRREG(0x520)
-#define S5PC100_APLL_CON_L8			S5PC1XX_PWRREG(0x600)
-#define S5PC100_APLL_CON_L7			S5PC1XX_PWRREG(0x604)
-#define S5PC100_APLL_CON_L6			S5PC1XX_PWRREG(0x608)
-#define S5PC100_APLL_CON_L5			S5PC1XX_PWRREG(0x60C)
-#define S5PC100_APLL_CON_L4			S5PC1XX_PWRREG(0x610)
-#define S5PC100_APLL_CON_L3			S5PC1XX_PWRREG(0x614)
-#define S5PC100_APLL_CON_L2			S5PC1XX_PWRREG(0x618)
-#define S5PC100_APLL_CON_L1			S5PC1XX_PWRREG(0x61C)
-#define S5PC100_IEM_CONTROL			S5PC1XX_PWRREG(0x620)
-#define S5PC100_CLKDIV_IEM_L8			S5PC1XX_PWRREG(0x700)
-#define S5PC100_CLKDIV_IEM_L7			S5PC1XX_PWRREG(0x704)
-#define S5PC100_CLKDIV_IEM_L6			S5PC1XX_PWRREG(0x708)
-#define S5PC100_CLKDIV_IEM_L5			S5PC1XX_PWRREG(0x70C)
-#define S5PC100_CLKDIV_IEM_L4			S5PC1XX_PWRREG(0x710)
-#define S5PC100_CLKDIV_IEM_L3			S5PC1XX_PWRREG(0x714)
-#define S5PC100_CLKDIV_IEM_L2			S5PC1XX_PWRREG(0x718)
-#define S5PC100_CLKDIV_IEM_L1			S5PC1XX_PWRREG(0x71C)
-#define S5PC100_IEM_HPMCLK_DIV			S5PC1XX_PWRREG(0x724)
-
-/* PWR_CFG */
-#define S5PC100_PWRCFG_CFG_DEEP_IDLE		(1 << 31)
-#define S5PC100_PWRCFG_CFG_WFI_MASK		(3 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_IDLE		(0 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE	(1 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_STOP		(2 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_SLEEP		(3 << 5)
-
-/* SLEEP_CFG */
-#define S5PC100_SLEEP_OSC_EN_SLEEP		(1 << 0)
-
-/* OTHERS */
-#define S5PC100_PMU_INT_DISABLE			(1 << 24)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
deleted file mode 100644
index 2531f34..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Header file for s5pc100 cpu support
- *
- * Based on plat-s3c64xx/include/plat/s3c6400.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-extern  int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern  int s5pc100_register_baseclocks(unsigned long xtal);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-extern struct sysdev_class s5pc100_sysclass;
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
-extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
-extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
-extern struct clk clk_hpll;
-extern struct clk clk_hd0;
-extern struct clk clk_pd0;
-extern struct clk clk_54m;
-extern void s5pc1xx_register_clocks(void);
-extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
-extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
-extern struct platform_device s3c_device_g2d;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_vpp;
-extern struct platform_device s3c_device_tvenc;
-extern struct platform_device s3c_device_tvscaler;
-extern struct platform_device s3c_device_rotator;
-extern struct platform_device s3c_device_jpeg;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_usb_otghcd;
-extern struct platform_device s3c_device_keypad;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_smc911x;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_mfc;
-extern struct platform_device s3c_device_ac97;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_fimc2;
-
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
deleted file mode 100644
index 373122f..0000000
--- a/arch/arm/plat-s5pc1xx/irq-eint.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc1xx/irq-eint.c
- *
- *  Copyright 2009 Samsung Electronics Co.
- *  Byungho Min <bhmin@samsung.com>
- *  Kyungin Park <kyungmin.park@samsung.com>
- *
- * Based on plat-s3c64xx/irq-eint.c
- *
- * S5PC1XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-ext.h>
-#include <plat/pm.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-irqtype.h>
-
-/*
- * bank is a group of external interrupt
- * bank0 means EINT0 ... EINT7
- * bank1 means EINT8 ... EINT15
- * bank2 means EINT16 ... EINT23
- * bank3 means EINT24 ... EINT31
- */
-
-static inline int s3c_get_eint(unsigned int irq)
-{
-	int real;
-
-	if (irq < IRQ_EINT16_31)
-		real = (irq - IRQ_EINT0);
-	else
-		real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
-
-	return real;
-}
-
-static inline int s3c_get_bank(unsigned int irq)
-{
-	return s3c_get_eint(irq) >> 3;
-}
-
-static inline int s3c_eint_to_bit(unsigned int irq)
-{
-	int real, bit;
-
-	real = s3c_get_eint(irq);
-	bit = 1 << (real & (8 - 1));
-
-	return bit;
-}
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
-	u32 mask;
-	u32 bank = s3c_get_bank(irq);
-
-	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
-	mask |= s3c_eint_to_bit(irq);
-	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
-	u32 mask;
-	u32 bank = s3c_get_bank(irq);
-
-	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
-	mask &= ~(s3c_eint_to_bit(irq));
-	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
-	u32 bank = s3c_get_bank(irq);
-
-	__raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
-	/* compiler should in-line these */
-	s3c_irq_eint_mask(irq);
-	s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
-	u32 bank = s3c_get_bank(irq);
-	int real = s3c_get_eint(irq);
-	int gpio, shift, sfn;
-	u32 ctrl, con = 0;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-
-	case IRQ_TYPE_EDGE_RISING:
-		con = S5PC1XX_WKUP_INT_RISEEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		con = S5PC1XX_WKUP_INT_FALLEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		con = S5PC1XX_WKUP_INT_BOTHEDGE;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		con = S5PC1XX_WKUP_INT_LOWLEV;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		con = S5PC1XX_WKUP_INT_HILEV;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	gpio = real & (8 - 1);
-	shift = gpio << 2;
-
-	ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
-	ctrl &= ~(0x7 << shift);
-	ctrl |= con << shift;
-	__raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
-
-	switch (real) {
-	case 0 ... 7:
-			gpio = S5PC100_GPH0(gpio);
-		break;
-	case 8 ... 15:
-			gpio = S5PC100_GPH1(gpio);
-		break;
-	case 16 ... 23:
-			gpio = S5PC100_GPH2(gpio);
-		break;
-	case 24 ... 31:
-			gpio = S5PC100_GPH3(gpio);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	sfn = S3C_GPIO_SFN(0x2);
-	s3c_gpio_cfgpin(gpio, sfn);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
-	.name		= "EINT",
-	.mask		= s3c_irq_eint_mask,
-	.unmask		= s3c_irq_eint_unmask,
-	.mask_ack	= s3c_irq_eint_maskack,
-	.ack		= s3c_irq_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from external interrupts,
- * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
-	u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
-	unsigned int irq;
-
-	status &= ~mask;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-
-		status >>= 1;
-	}
-}
-
-static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(16, 23);
-	s3c_irq_demux_eint(24, 31);
-}
-
-/*
- * Handle EINT0 ... EINT15 at VIC directly
- */
-static void s3c_irq_vic_eint_mask(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	unsigned int real;
-
-	s3c_irq_eint_mask(irq);
-	real = s3c_get_eint(irq);
-	writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s3c_irq_vic_eint_unmask(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	unsigned int real;
-
-	s3c_irq_eint_unmask(irq);
-	real = s3c_get_eint(irq);
-	writel(1 << real, base + VIC_INT_ENABLE);
-}
-
-static inline void s3c_irq_vic_eint_ack(unsigned int irq)
-{
-	u32 bit;
-	u32 bank = s3c_get_bank(irq);
-
-	bit = s3c_eint_to_bit(irq);
-	__raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_vic_eint_maskack(unsigned int irq)
-{
-	/* compiler should in-line these */
-	s3c_irq_vic_eint_mask(irq);
-	s3c_irq_vic_eint_ack(irq);
-}
-
-static struct irq_chip s3c_irq_vic_eint = {
-	.name		= "EINT",
-	.mask		= s3c_irq_vic_eint_mask,
-	.unmask		= s3c_irq_vic_eint_unmask,
-	.mask_ack	= s3c_irq_vic_eint_maskack,
-	.ack		= s3c_irq_vic_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
-};
-
-static int __init s5pc1xx_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
-		set_irq_chip(irq, &s3c_irq_vic_eint);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
-		set_irq_chip(irq, &s3c_irq_eint);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
-
-	return 0;
-}
-
-arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
deleted file mode 100644
index bfc5248..0000000
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* arch/arm/plat-s5pc1xx/irq.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Interrupt handling
- *
- * Based on plat-s3c64xx/irq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= (void *)S3C_VA_UART0,
-		.base_irq	= IRQ_S3CUART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= (void *)S3C_VA_UART1,
-		.base_irq	= IRQ_S3CUART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= (void *)S3C_VA_UART2,
-		.base_irq	= IRQ_S3CUART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-	[3] = {
-		.regs		= (void *)S3C_VA_UART3,
-		.base_irq	= IRQ_S3CUART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-};
-
-void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
-{
-	int i;
-
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	for (i = 0; i < num; i++)
-		vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
-				vic_valid[i], 0);
-
-	/* add the timer sub-irqs */
-
-	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
-	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
-	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
-	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
-	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
-
-	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
-}
-
-
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
deleted file mode 100644
index 2bf6c57..0000000
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ /dev/null
@@ -1,876 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
- *
- * Copyright 2009 Samsung Electronics, Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 based common clock support
- *
- * Based on plat-s3c64xx/s3c6400-clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-	.id		= -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_vclk_54m	clk_54m
-
-/* APLL */
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_apll,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
-	ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll = {
-	.name		= "dout_apll",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_apll_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
-	ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return rate;
-
-	div = (parent / rate) - 1;
-	if (div > S5PC100_CLKDIV0_ARM_MASK)
-		div = S5PC100_CLKDIV0_ARM_MASK;
-
-	return parent / (div + 1);
-}
-
-static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S5PC100_CLKDIV0);
-	val &= S5PC100_CLKDIV0_ARM_MASK;
-	val |= (div - 1);
-	__raw_writel(val, S5PC100_CLKDIV0);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.parent		= &clk_dout_apll,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_arm_get_rate,
-		.set_rate	= s5pc100_clk_arm_set_rate,
-		.round_rate	= s5pc100_clk_arm_round_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
-	ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d0_bus = {
-	.name		= "dout_d0_bus",
-	.id		= -1,
-	.parent		= &clk_arm,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
-	ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd0 = {
-	.name		= "dout_pclkd0",
-	.id		= -1,
-	.parent		= &clk_dout_d0_bus,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
-	ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll2 = {
-	.name		= "dout_apll2",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_apll2_get_rate,
-	},
-};
-
-/* MPLL */
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_mpll,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
-};
-
-static struct clk *clkset_am_list[] = {
-	[0] = &clk_mout_mpll.clk,
-	[1] = &clk_dout_apll2,
-};
-
-static struct clksrc_sources clk_src_am = {
-	.sources	= clkset_am_list,
-	.nr_sources	= ARRAY_SIZE(clkset_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
-	.clk = {
-		.name		= "mout_am",
-		.id		= -1,
-	},
-	.sources	= &clk_src_am,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
-	ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d1_bus = {
-	.name		= "dout_d1_bus",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
-	},
-};
-
-static struct clk *clkset_onenand_list[] = {
-	[0] = &clk_dout_d0_bus,
-	[1] = &clk_dout_d1_bus,
-};
-
-static struct clksrc_sources clk_src_onenand = {
-	.sources	= clkset_onenand_list,
-	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
-	.clk = {
-		.name		= "mout_onenand",
-		.id		= -1,
-	},
-	.sources	= &clk_src_onenand,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
-	ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd1 = {
-	.name		= "dout_pclkd1",
-	.id		= -1,
-	.parent		= &clk_dout_d1_bus,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
-	ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll2 = {
-	.name		= "dout_mpll2",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
-	ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_cam = {
-	.name		= "dout_cam",
-	.id		= -1,
-	.parent		= &clk_dout_mpll2,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_cam_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
-	ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_mpll_get_rate,
-	},
-};
-
-/* EPLL */
-static struct clk clk_fout_epll = {
-	.name		= "fout_epll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.sources = &clk_src_epll,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
-};
-
-/* HPLL */
-static struct clk clk_fout_hpll = {
-	.name		= "fout_hpll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_hpll_list[] = {
-	[0] = &clk_27m,
-	[1] = &clk_fout_hpll,
-};
-
-static struct clksrc_sources clk_src_hpll = {
-	.sources	= clk_src_hpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
-	.clk	= {
-		.name		= "mout_hpll",
-		.id		= -1,
-	},
-	.sources = &clk_src_hpll,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
-};
-
-/* Peripherals */
-/*
- * The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S5PC100 version, and also
- * have a common parent divisor so are not included here.
- */
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd2 = {
-	.name		= "iis_cdclk2",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd0 = {
-	.name		= "pcm_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd1 = {
-	.name		= "pcm_cdclk1",
-	.id		= -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd0,
-	&clk_pcm_cd0,
-	&clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_spi_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll2,
-	&clk_fin_epll,
-	&clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_spi = {
-	.sources	= clkset_spi_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd1,
-	&clk_pcm_cd1,
-	&clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clk *clkset_audio2_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd2,
-	&clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio2 = {
-	.sources	= clkset_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
-};
-
-static struct clksrc_clk clksrc_audio[] = {
-	{
-		.clk	= {
-			.name		= "audio-bus",
-			.id		= 0,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_audio0,
-		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
-	}, {
-		.clk	= {
-			.name		= "audio-bus",
-			.id		= 1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_audio1,
-		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
-	}, {
-		.clk	= {
-			.name		= "audio-bus",
-			.id		= 2,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_audio2,
-		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
-	},
-};
-
-static struct clk *clkset_spdif_list[] = {
-	&clksrc_audio[0].clk,
-	&clksrc_audio[1].clk,
-	&clksrc_audio[2].clk,
-};
-
-static struct clksrc_sources clkset_spdif = {
-	.sources	= clkset_spdif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
-};
-
-static struct clk *clkset_lcd_fimc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_mout_hpll.clk,
-	&clk_vclk_54m,
-};
-
-static struct clksrc_sources clkset_lcd_fimc = {
-	.sources	= clkset_lcd_fimc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
-};
-
-static struct clk *clkset_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_mout_hpll.clk ,
-};
-
-static struct clksrc_sources clkset_mmc = {
-	.sources	= clkset_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
-};
-
-static struct clk *clkset_usbhost_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_mout_hpll.clk,
-	&clk_48m,
-};
-
-static struct clksrc_sources clkset_usbhost = {
-	.sources	= clkset_usbhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
-};
-
-static struct clksrc_clk clksrc_clks[] = {
-	{
-		.clk	= {
-			.name		= "spi_bus",
-			.id		= 0,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clkset_spi,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "spi_bus",
-			.id		= 1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_spi,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "spi_bus",
-			.id		= 2,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_spi,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "uclk1",
-			.id		= -1,
-			.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_uart,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
-	}, {
-		.clk	= {
-			.name		= "spdif",
-			.id		= -1,
-		},
-		.sources	= &clkset_spdif,
-		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "lcd",
-			.id		= -1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_lcd_fimc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "fimc",
-			.id		= 0,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_lcd_fimc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "fimc",
-			.id		= 1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources	= &clkset_lcd_fimc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "fimc",
-			.id		= 2,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_lcd_fimc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 0,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_mmc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_mmc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 2,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources	= &clkset_mmc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "usbhost",
-			.id		= -1,
-			.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_usbhost,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
-	}
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_mpll,
-	&clk_mout_am,
-	&clk_mout_onenand,
-	&clk_mout_epll,
-	&clk_mout_hpll,
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long armclk;
-	unsigned long hclkd0;
-	unsigned long hclk;
-	unsigned long pclkd0;
-	unsigned long pclk;
-	unsigned long apll, mpll, epll, hpll;
-	unsigned int ptr;
-	u32 clkdiv0, clkdiv1;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
-	clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
-
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
-	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
-	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
-	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
-
-	printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
-		", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
-		print_mhz(apll), print_mhz(mpll),
-		print_mhz(epll), print_mhz(hpll));
-
-	armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
-	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
-	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
-	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
-	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
-	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
-
-	printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
-		" PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
-		" PCLK=%ld.%03ld MHz\n",
-		print_mhz(armclk), print_mhz(hclkd0),
-		print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_hpll.rate = hpll;
-
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = armclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
-		s3c_set_clksrc(clksrc_audio + ptr, true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
-		s3c_set_clksrc(clksrc_clks + ptr, true);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_dout_apll,
-	&clk_dout_d0_bus,
-	&clk_dout_pclkd0,
-	&clk_dout_apll2,
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-	&clk_mout_epll.clk,
-	&clk_mout_hpll.clk,
-	&clk_mout_am.clk,
-	&clk_dout_d1_bus,
-	&clk_mout_onenand.clk,
-	&clk_dout_pclkd1,
-	&clk_dout_mpll2,
-	&clk_dout_cam,
-	&clk_dout_mpll,
-	&clk_fout_epll,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_iis_cd2,
-	&clk_pcm_cd0,
-	&clk_pcm_cd1,
-	&clk_arm,
-};
-
-void __init s5pc100_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
-	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 229919e..b787d57 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,7 +6,7 @@
 
 config PLAT_SAMSUNG
 	bool
-	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
 	select NO_IOPORT
 	default y
 	help
@@ -170,6 +170,11 @@
 	help
 	  Compile in platform device definitions for I2C channel 1
 
+config S3C_DEV_I2C2
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 2
+
 config S3C_DEV_FB
 	bool
 	help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4828849..606ec84 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -36,6 +36,7 @@
 obj-$(CONFIG_S3C_DEV_HWMON)	+= dev-hwmon.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_I2C2)	+= dev-i2c2.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-y				+= dev-uart.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c
new file mode 100644
index 0000000..07036de
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c2.c
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c/dev-i2c2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C series device definition for i2c device 2
+ *
+ * Based on plat-samsung/dev-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC2,
+		.end   = S3C_PA_IIC2 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CAN0,
+		.end   = IRQ_CAN0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c2 = {
+	.name		  = "s3c2410-i2c",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data2 __initdata = {
+	.flags		= 0,
+	.bus_num	= 2,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data2;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
+
+	s3c_device_i2c2.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index cd74a07..8d516d4 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -45,6 +45,7 @@
 extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
 extern struct platform_device s3c_device_i2c1;
+extern struct platform_device s3c_device_i2c2;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
@@ -89,6 +90,13 @@
 extern struct platform_device s5p6440_device_pcm;
 extern struct platform_device s5p6440_device_iis;
 
+extern struct platform_device s5pc100_device_ac97;
+extern struct platform_device s5pc100_device_pcm0;
+extern struct platform_device s5pc100_device_pcm1;
+extern struct platform_device s5pc100_device_iis0;
+extern struct platform_device s5pc100_device_iis1;
+extern struct platform_device s5pc100_device_iis2;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 1f85649..27d3b49 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -84,4 +84,11 @@
  */
 extern void s5pc100_fb_gpio_setup_24bpp(void);
 
+/**
+ * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pv210_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h
index 36397ca..f182669 100644
--- a/arch/arm/plat-samsung/include/plat/iic-core.h
+++ b/arch/arm/plat-samsung/include/plat/iic-core.h
@@ -32,4 +32,11 @@
 #endif
 }
 
+static inline void s3c_i2c2_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C2
+	s3c_device_i2c2.name = name;
+#endif
+}
+
 #endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 3083df0..133308b 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -54,9 +54,11 @@
  */
 extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
 
 /* defined by architecture to configure gpio */
 extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
 extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
 
 #endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 7d07cd7..13f9fb2 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -75,6 +75,9 @@
 extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
@@ -218,4 +221,56 @@
 static inline void s5pc100_default_sdhci2(void) { }
 #endif /* CONFIG_S5PC100_SETUP_SDHCI */
 
+
+/* S5PC110 SDHCI setup */
+#ifdef CONFIG_S5PV210_SETUP_SDHCI
+extern char *s5pv210_hsmmc_clksrcs[4];
+
+extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pv210_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pv210_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pv210_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#else
+static inline void s5pv210_default_sdhci0(void) { }
+static inline void s5pv210_default_sdhci1(void) { }
+static inline void s5pv210_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
+
+
+
 #endif /* __PLAT_S3C_SDHCI_H */