drivers/net/ethernet/microchip/encx24j600_hw.h - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 /* SPDX-License-Identifier: GPL-2.0 */
 /**
  * encx24j600_hw.h: Register definitions
  *
  */

 #ifndef _ENCX24J600_HW_H
 #define _ENCX24J600_HW_H

 struct encx24j600_context {
 	struct spi_device *spi;
 	struct regmap *regmap;
 	struct regmap *phymap;
 	struct mutex mutex; /* mutex to protect access to regmap */
 	int bank;
 };

 int devm_regmap_init_encx24j600(struct device *dev,
 				struct encx24j600_context *ctx);

 /* Single-byte instructions */
 #define BANK_SELECT(bank) (0xC0 | ((bank & (BANK_MASK >> BANK_SHIFT)) << 1))
 #define B0SEL 0xC0		/* Bank 0 Select */
 #define B1SEL 0xC2		/* Bank 1 Select */
 #define B2SEL 0xC4		/* Bank 2 Select */
 #define B3SEL 0xC6		/* Bank 3 Select */
 #define SETETHRST 0xCA		/* System Reset */
 #define FCDISABLE 0xE0		/* Flow Control Disable */
 #define FCSINGLE 0xE2		/* Flow Control Single */
 #define FCMULTIPLE 0xE4		/* Flow Control Multiple */
 #define FCCLEAR 0xE6		/* Flow Control Clear */
 #define SETPKTDEC 0xCC		/* Decrement Packet Counter */
 #define DMASTOP 0xD2		/* DMA Stop */
 #define DMACKSUM 0xD8		/* DMA Start Checksum */
 #define DMACKSUMS 0xDA		/* DMA Start Checksum with Seed */
 #define DMACOPY 0xDC		/* DMA Start Copy */
 #define DMACOPYS 0xDE		/* DMA Start Copy and Checksum with Seed */
 #define SETTXRTS 0xD4		/* Request Packet Transmission */
 #define ENABLERX 0xE8		/* Enable RX */
 #define DISABLERX 0xEA		/* Disable RX */
 #define SETEIE 0xEC		/* Enable Interrupts */
 #define CLREIE 0xEE		/* Disable Interrupts */

 /* Two byte instructions */
 #define RBSEL 0xC8		/* Read Bank Select */

 /* Three byte instructions */
 #define WGPRDPT 0x60		/* Write EGPRDPT */
 #define RGPRDPT 0x62		/* Read EGPRDPT */
 #define WRXRDPT 0x64		/* Write ERXRDPT */
 #define RRXRDPT 0x66		/* Read ERXRDPT */
 #define WUDARDPT 0x68		/* Write EUDARDPT */
 #define RUDARDPT 0x6A		/* Read EUDARDPT */
 #define WGPWRPT 0x6C		/* Write EGPWRPT */
 #define RGPWRPT 0x6E		/* Read EGPWRPT */
 #define WRXWRPT 0x70		/* Write ERXWRPT */
 #define RRXWRPT 0x72		/* Read ERXWRPT */
 #define WUDAWRPT 0x74		/* Write EUDAWRPT */
 #define RUDAWRPT 0x76		/* Read EUDAWRPT */

 /* n byte instructions */
 #define RCRCODE 0x00
 #define WCRCODE 0x40
 #define BFSCODE 0x80
 #define BFCCODE 0xA0
 #define RCR(addr) (RCRCODE | (addr & ADDR_MASK)) /* Read Control Register */
 #define WCR(addr) (WCRCODE | (addr & ADDR_MASK)) /* Write Control Register */
 #define RCRU 0x20		/* Read Control Register Unbanked */
 #define WCRU 0x22		/* Write Control Register Unbanked */
 #define BFS(addr) (BFSCODE | (addr & ADDR_MASK)) /* Bit Field Set */
 #define BFC(addr) (BFCCODE | (addr & ADDR_MASK)) /* Bit Field Clear */
 #define BFSU 0x24		/* Bit Field Set Unbanked */
 #define BFCU 0x26		/* Bit Field Clear Unbanked */
 #define RGPDATA 0x28		/* Read EGPDATA */
 #define WGPDATA 0x2A		/* Write EGPDATA */
 #define RRXDATA 0x2C		/* Read ERXDATA */
 #define WRXDATA 0x2E		/* Write ERXDATA */
 #define RUDADATA 0x30		/* Read EUDADATA */
 #define WUDADATA 0x32		/* Write EUDADATA */

 #define SFR_REG_COUNT	0xA0

 /* ENC424J600 Control Registers
  * Control register definitions are a combination of address
  * and bank number
  * - Register address (bits 0-4)
  * - Bank number (bits 5-6)
  */
 #define ADDR_MASK 0x1F
 #define BANK_MASK 0x60
 #define BANK_SHIFT 5

 /* All-bank registers */
 #define EUDAST 0x16
 #define EUDAND 0x18
 #define ESTAT 0x1A
 #define EIR 0x1C
 #define ECON1 0x1E

 /* Bank 0 registers */
 #define ETXST (0x00 | 0x00)
 #define ETXLEN (0x02 | 0x00)
 #define ERXST (0x04 | 0x00)
 #define ERXTAIL (0x06 | 0x00)
 #define ERXHEAD (0x08 | 0x00)
 #define EDMAST (0x0A | 0x00)
 #define EDMALEN (0x0C | 0x00)
 #define EDMADST (0x0E | 0x00)
 #define EDMACS (0x10 | 0x00)
 #define ETXSTAT (0x12 | 0x00)
 #define ETXWIRE (0x14 | 0x00)

 /* Bank 1 registers */
 #define EHT1 (0x00 | 0x20)
 #define EHT2 (0x02 | 0x20)
 #define EHT3 (0x04 | 0x20)
 #define EHT4 (0x06 | 0x20)
 #define EPMM1 (0x08 | 0x20)
 #define EPMM2 (0x0A | 0x20)
 #define EPMM3 (0x0C | 0x20)
 #define EPMM4 (0x0E | 0x20)
 #define EPMCS (0x10 | 0x20)
 #define EPMO (0x12 | 0x20)
 #define ERXFCON (0x14 | 0x20)

 /* Bank 2 registers */
 #define MACON1 (0x00 | 0x40)
 #define MACON2 (0x02 | 0x40)
 #define MABBIPG (0x04 | 0x40)
 #define MAIPG (0x06 | 0x40)
 #define MACLCON (0x08 | 0x40)
 #define MAMXFL (0x0A | 0x40)
 #define MICMD (0x12 | 0x40)
 #define MIREGADR (0x14 | 0x40)

 /* Bank 3 registers */
 #define MAADR3 (0x00 | 0x60)
 #define MAADR2 (0x02 | 0x60)
 #define MAADR1 (0x04 | 0x60)
 #define MIWR (0x06 | 0x60)
 #define MIRD (0x08 | 0x60)
 #define MISTAT (0x0A | 0x60)
 #define EPAUS (0x0C | 0x60)
 #define ECON2 (0x0E | 0x60)
 #define ERXWM (0x10 | 0x60)
 #define EIE (0x12 | 0x60)
 #define EIDLED (0x14 | 0x60)

 /* Unbanked registers */
 #define EGPDATA (0x00 | 0x80)
 #define ERXDATA (0x02 | 0x80)
 #define EUDADATA (0x04 | 0x80)
 #define EGPRDPT (0x06 | 0x80)
 #define EGPWRPT (0x08 | 0x80)
 #define ERXRDPT (0x0A | 0x80)
 #define ERXWRPT (0x0C | 0x80)
 #define EUDARDPT (0x0E | 0x80)
 #define EUDAWRPT (0x10 | 0x80)


 /* Register bit definitions */
 /* ESTAT */
 #define INT (1 << 15)
 #define FCIDLE (1 << 14)
 #define RXBUSY (1 << 13)
 #define CLKRDY (1 << 12)
 #define PHYDPX (1 << 10)
 #define PHYLNK (1 << 8)

 /* EIR */
 #define CRYPTEN (1 << 15)
 #define MODEXIF (1 << 14)
 #define HASHIF (1 << 13)
 #define AESIF (1 << 12)
 #define LINKIF (1 << 11)
 #define PKTIF (1 << 6)
 #define DMAIF (1 << 5)
 #define TXIF (1 << 3)
 #define TXABTIF (1 << 2)
 #define RXABTIF (1 << 1)
 #define PCFULIF (1 << 0)

 /* ECON1 */
 #define MODEXST (1 << 15)
 #define HASHEN (1 << 14)
 #define HASHOP (1 << 13)
 #define HASHLST (1 << 12)
 #define AESST (1 << 11)
 #define AESOP1 (1 << 10)
 #define AESOP0 (1 << 9)
 #define PKTDEC (1 << 8)
 #define FCOP1 (1 << 7)
 #define FCOP0 (1 << 6)
 #define DMAST (1 << 5)
 #define DMACPY (1 << 4)
 #define DMACSSD (1 << 3)
 #define DMANOCS (1 << 2)
 #define TXRTS (1 << 1)
 #define RXEN (1 << 0)

 /* ETXSTAT */
 #define LATECOL (1 << 10)
 #define MAXCOL (1 << 9)
 #define EXDEFER (1 << 8)
 #define ETXSTATL_DEFER (1 << 7)
 #define CRCBAD (1 << 4)
 #define COLCNT_MASK 0xF

 /* ERXFCON */
 #define HTEN (1 << 15)
 #define MPEN (1 << 14)
 #define NOTPM (1 << 12)
 #define PMEN3 (1 << 11)
 #define PMEN2 (1 << 10)
 #define PMEN1 (1 << 9)
 #define PMEN0 (1 << 8)
 #define CRCEEN (1 << 7)
 #define CRCEN (1 << 6)
 #define RUNTEEN (1 << 5)
 #define RUNTEN (1 << 4)
 #define UCEN (1 << 3)
 #define NOTMEEN (1 << 2)
 #define MCEN (1 << 1)
 #define BCEN (1 << 0)

 /* MACON1 */
 #define LOOPBK (1 << 4)
 #define RXPAUS (1 << 2)
 #define PASSALL (1 << 1)

 /* MACON2 */
 #define MACON2_DEFER (1 << 14)
 #define BPEN (1 << 13)
 #define NOBKOFF (1 << 12)
 #define PADCFG2 (1 << 7)
 #define PADCFG1 (1 << 6)
 #define PADCFG0 (1 << 5)
 #define TXCRCEN (1 << 4)
 #define PHDREN (1 << 3)
 #define HFRMEN (1 << 2)
 #define MACON2_RSV1 (1 << 1)
 #define FULDPX (1 << 0)

 /* MAIPG */
 /* value of the high byte is given by the reserved bits,
  * value of the low byte is recomended setting of the
  * IPG parameter.
  */
 #define MAIPGH_VAL 0x0C
 #define MAIPGL_VAL 0x12

 /* MIREGADRH */
 #define MIREGADR_VAL (1 << 8)

 /* MIREGADRL */
 #define PHREG_MASK 0x1F

 /* MICMD */
 #define MIISCAN (1 << 1)
 #define MIIRD (1 << 0)

 /* MISTAT */
 #define NVALID (1 << 2)
 #define SCAN (1 << 1)
 #define BUSY (1 << 0)

 /* ECON2 */
 #define ETHEN (1 << 15)
 #define STRCH (1 << 14)
 #define TXMAC (1 << 13)
 #define SHA1MD5 (1 << 12)
 #define COCON3 (1 << 11)
 #define COCON2 (1 << 10)
 #define COCON1 (1 << 9)
 #define COCON0 (1 << 8)
 #define AUTOFC (1 << 7)
 #define TXRST (1 << 6)
 #define RXRST (1 << 5)
 #define ETHRST (1 << 4)
 #define MODLEN1 (1 << 3)
 #define MODLEN0 (1 << 2)
 #define AESLEN1 (1 << 1)
 #define AESLEN0 (1 << 0)

 /* EIE */
 #define INTIE (1 << 15)
 #define MODEXIE (1 << 14)
 #define HASHIE (1 << 13)
 #define AESIE (1 << 12)
 #define LINKIE (1 << 11)
 #define PKTIE (1 << 6)
 #define DMAIE (1 << 5)
 #define TXIE (1 << 3)
 #define TXABTIE (1 << 2)
 #define RXABTIE (1 << 1)
 #define PCFULIE (1 << 0)

 /* EIDLED */
 #define LACFG3 (1 << 15)
 #define LACFG2 (1 << 14)
 #define LACFG1 (1 << 13)
 #define LACFG0 (1 << 12)
 #define LBCFG3 (1 << 11)
 #define LBCFG2 (1 << 10)
 #define LBCFG1 (1 << 9)
 #define LBCFG0 (1 << 8)
 #define DEVID_SHIFT 5
 #define DEVID_MASK (0x7 << DEVID_SHIFT)
 #define REVID_SHIFT 0
 #define REVID_MASK (0x1F << REVID_SHIFT)

 /* PHY registers */
 #define PHCON1 0x00
 #define PHSTAT1 0x01
 #define PHANA 0x04
 #define PHANLPA 0x05
 #define PHANE 0x06
 #define PHCON2 0x11
 #define PHSTAT2 0x1B
 #define PHSTAT3 0x1F

 /* PHCON1 */
 #define PRST (1 << 15)
 #define PLOOPBK (1 << 14)
 #define SPD100 (1 << 13)
 #define ANEN (1 << 12)
 #define PSLEEP (1 << 11)
 #define RENEG (1 << 9)
 #define PFULDPX (1 << 8)

 /* PHSTAT1 */
 #define FULL100 (1 << 14)
 #define HALF100 (1 << 13)
 #define FULL10 (1 << 12)
 #define HALF10 (1 << 11)
 #define ANDONE (1 << 5)
 #define LRFAULT (1 << 4)
 #define ANABLE (1 << 3)
 #define LLSTAT (1 << 2)
 #define EXTREGS (1 << 0)

 /* PHSTAT2 */
 #define PLRITY (1 << 4)

 /* PHSTAT3 */
 #define PHY3SPD100 (1 << 3)
 #define PHY3DPX (1 << 4)
 #define SPDDPX_SHIFT 2
 #define SPDDPX_MASK (0x7 << SPDDPX_SHIFT)

 /* PHANA */
 /* Default value for PHY initialization*/
 #define PHANA_DEFAULT 0x05E1

 /* PHANE */
 #define PDFLT (1 << 4)
 #define LPARCD (1 << 1)
 #define LPANABL (1 << 0)

 #define EUDAST_TEST_VAL 0x1234

 #define TSV_SIZE 7

 #define ENCX24J600_DEV_ID 0x1

 /* Configuration */

 /* Led is on when the link is present and driven low
  * temporarily when packet is TX'd or RX'd
  */
 #define LED_A_SETTINGS 0xC

 /* Led is on if the link is in 100 Mbps mode */
 #define LED_B_SETTINGS 0x8

 /* maximum ethernet frame length
  * Currently not used as a limit anywhere
  * (we're using the "huge frame enable" feature of
  * enc424j600).
  */
 #define MAX_FRAMELEN 1518

 /* Size in bytes of the receive buffer in enc424j600.
  * Must be word aligned (even).
  */
 #define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)

 /* Start of the general purpose area in sram */
 #define SRAM_GP_START 0x0

 /* SRAM size */
 #define SRAM_SIZE 0x6000

 /* Start of the receive buffer */
 #define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)

 #define RSV_RXLONGEVDROPEV	16
 #define RSV_CARRIEREV		18
 #define RSV_CRCERROR		20
 #define RSV_LENCHECKERR		21
 #define RSV_LENOUTOFRANGE	22
 #define RSV_RXOK		23
 #define RSV_RXMULTICAST		24
 #define RSV_RXBROADCAST		25
 #define RSV_DRIBBLENIBBLE	26
 #define RSV_RXCONTROLFRAME	27
 #define RSV_RXPAUSEFRAME	28
 #define RSV_RXUNKNOWNOPCODE	29
 #define RSV_RXTYPEVLAN		30

 #define RSV_RUNTFILTERMATCH	31
 #define RSV_NOTMEFILTERMATCH	32
 #define RSV_HASHFILTERMATCH	33
 #define RSV_MAGICPKTFILTERMATCH	34
 #define RSV_PTRNMTCHFILTERMATCH	35
 #define RSV_UNICASTFILTERMATCH	36

 #define RSV_SIZE		8
 #define RSV_BITMASK(x)		(1 << ((x) - 16))
 #define RSV_GETBIT(x, y)	(((x) & RSV_BITMASK(y)) ? 1 : 0)

 struct rsv {
 	u16 next_packet;
 	u16 len;
 	u32 rxstat;
 };

 /* Put RX buffer at 0 as suggested by the Errata datasheet */

 #define RXSTART_INIT		ERXST_VAL
 #define RXEND_INIT		0x5FFF

 int regmap_encx24j600_spi_write(void *context, u8 reg, const u8 *data,
 				size_t count);
 int regmap_encx24j600_spi_read(void *context, u8 reg, u8 *data, size_t count);


 #endif
	/* SPDX-License-Identifier: GPL-2.0 */
	/**
	* encx24j600_hw.h: Register definitions
	*
	*/

	#ifndef _ENCX24J600_HW_H
	#define _ENCX24J600_HW_H

	struct encx24j600_context {
	struct spi_device *spi;
	struct regmap *regmap;
	struct regmap *phymap;
	struct mutex mutex; /* mutex to protect access to regmap */
	int bank;
	};

	int devm_regmap_init_encx24j600(struct device *dev,
	struct encx24j600_context *ctx);

	/* Single-byte instructions */
	#define BANK_SELECT(bank) (0xC0 \| ((bank & (BANK_MASK >> BANK_SHIFT)) << 1))
	#define B0SEL 0xC0 /* Bank 0 Select */
	#define B1SEL 0xC2 /* Bank 1 Select */
	#define B2SEL 0xC4 /* Bank 2 Select */
	#define B3SEL 0xC6 /* Bank 3 Select */
	#define SETETHRST 0xCA /* System Reset */
	#define FCDISABLE 0xE0 /* Flow Control Disable */
	#define FCSINGLE 0xE2 /* Flow Control Single */
	#define FCMULTIPLE 0xE4 /* Flow Control Multiple */
	#define FCCLEAR 0xE6 /* Flow Control Clear */
	#define SETPKTDEC 0xCC /* Decrement Packet Counter */
	#define DMASTOP 0xD2 /* DMA Stop */
	#define DMACKSUM 0xD8 /* DMA Start Checksum */
	#define DMACKSUMS 0xDA /* DMA Start Checksum with Seed */
	#define DMACOPY 0xDC /* DMA Start Copy */
	#define DMACOPYS 0xDE /* DMA Start Copy and Checksum with Seed */
	#define SETTXRTS 0xD4 /* Request Packet Transmission */
	#define ENABLERX 0xE8 /* Enable RX */
	#define DISABLERX 0xEA /* Disable RX */
	#define SETEIE 0xEC /* Enable Interrupts */
	#define CLREIE 0xEE /* Disable Interrupts */

	/* Two byte instructions */
	#define RBSEL 0xC8 /* Read Bank Select */

	/* Three byte instructions */
	#define WGPRDPT 0x60 /* Write EGPRDPT */
	#define RGPRDPT 0x62 /* Read EGPRDPT */
	#define WRXRDPT 0x64 /* Write ERXRDPT */
	#define RRXRDPT 0x66 /* Read ERXRDPT */
	#define WUDARDPT 0x68 /* Write EUDARDPT */
	#define RUDARDPT 0x6A /* Read EUDARDPT */
	#define WGPWRPT 0x6C /* Write EGPWRPT */
	#define RGPWRPT 0x6E /* Read EGPWRPT */
	#define WRXWRPT 0x70 /* Write ERXWRPT */
	#define RRXWRPT 0x72 /* Read ERXWRPT */
	#define WUDAWRPT 0x74 /* Write EUDAWRPT */
	#define RUDAWRPT 0x76 /* Read EUDAWRPT */

	/* n byte instructions */
	#define RCRCODE 0x00
	#define WCRCODE 0x40
	#define BFSCODE 0x80
	#define BFCCODE 0xA0
	#define RCR(addr) (RCRCODE \| (addr & ADDR_MASK)) /* Read Control Register */
	#define WCR(addr) (WCRCODE \| (addr & ADDR_MASK)) /* Write Control Register */
	#define RCRU 0x20 /* Read Control Register Unbanked */
	#define WCRU 0x22 /* Write Control Register Unbanked */
	#define BFS(addr) (BFSCODE \| (addr & ADDR_MASK)) /* Bit Field Set */
	#define BFC(addr) (BFCCODE \| (addr & ADDR_MASK)) /* Bit Field Clear */
	#define BFSU 0x24 /* Bit Field Set Unbanked */
	#define BFCU 0x26 /* Bit Field Clear Unbanked */
	#define RGPDATA 0x28 /* Read EGPDATA */
	#define WGPDATA 0x2A /* Write EGPDATA */
	#define RRXDATA 0x2C /* Read ERXDATA */
	#define WRXDATA 0x2E /* Write ERXDATA */
	#define RUDADATA 0x30 /* Read EUDADATA */
	#define WUDADATA 0x32 /* Write EUDADATA */

	#define SFR_REG_COUNT 0xA0

	/* ENC424J600 Control Registers
	* Control register definitions are a combination of address
	* and bank number
	* - Register address (bits 0-4)
	* - Bank number (bits 5-6)
	*/
	#define ADDR_MASK 0x1F
	#define BANK_MASK 0x60
	#define BANK_SHIFT 5

	/* All-bank registers */
	#define EUDAST 0x16
	#define EUDAND 0x18
	#define ESTAT 0x1A
	#define EIR 0x1C
	#define ECON1 0x1E

	/* Bank 0 registers */
	#define ETXST (0x00 \| 0x00)
	#define ETXLEN (0x02 \| 0x00)
	#define ERXST (0x04 \| 0x00)
	#define ERXTAIL (0x06 \| 0x00)
	#define ERXHEAD (0x08 \| 0x00)
	#define EDMAST (0x0A \| 0x00)
	#define EDMALEN (0x0C \| 0x00)
	#define EDMADST (0x0E \| 0x00)
	#define EDMACS (0x10 \| 0x00)
	#define ETXSTAT (0x12 \| 0x00)
	#define ETXWIRE (0x14 \| 0x00)

	/* Bank 1 registers */
	#define EHT1 (0x00 \| 0x20)
	#define EHT2 (0x02 \| 0x20)
	#define EHT3 (0x04 \| 0x20)
	#define EHT4 (0x06 \| 0x20)
	#define EPMM1 (0x08 \| 0x20)
	#define EPMM2 (0x0A \| 0x20)
	#define EPMM3 (0x0C \| 0x20)
	#define EPMM4 (0x0E \| 0x20)
	#define EPMCS (0x10 \| 0x20)
	#define EPMO (0x12 \| 0x20)
	#define ERXFCON (0x14 \| 0x20)

	/* Bank 2 registers */
	#define MACON1 (0x00 \| 0x40)
	#define MACON2 (0x02 \| 0x40)
	#define MABBIPG (0x04 \| 0x40)
	#define MAIPG (0x06 \| 0x40)
	#define MACLCON (0x08 \| 0x40)
	#define MAMXFL (0x0A \| 0x40)
	#define MICMD (0x12 \| 0x40)
	#define MIREGADR (0x14 \| 0x40)

	/* Bank 3 registers */
	#define MAADR3 (0x00 \| 0x60)
	#define MAADR2 (0x02 \| 0x60)
	#define MAADR1 (0x04 \| 0x60)
	#define MIWR (0x06 \| 0x60)
	#define MIRD (0x08 \| 0x60)
	#define MISTAT (0x0A \| 0x60)
	#define EPAUS (0x0C \| 0x60)
	#define ECON2 (0x0E \| 0x60)
	#define ERXWM (0x10 \| 0x60)
	#define EIE (0x12 \| 0x60)
	#define EIDLED (0x14 \| 0x60)

	/* Unbanked registers */
	#define EGPDATA (0x00 \| 0x80)
	#define ERXDATA (0x02 \| 0x80)
	#define EUDADATA (0x04 \| 0x80)
	#define EGPRDPT (0x06 \| 0x80)
	#define EGPWRPT (0x08 \| 0x80)
	#define ERXRDPT (0x0A \| 0x80)
	#define ERXWRPT (0x0C \| 0x80)
	#define EUDARDPT (0x0E \| 0x80)
	#define EUDAWRPT (0x10 \| 0x80)


	/* Register bit definitions */
	/* ESTAT */
	#define INT (1 << 15)
	#define FCIDLE (1 << 14)
	#define RXBUSY (1 << 13)
	#define CLKRDY (1 << 12)
	#define PHYDPX (1 << 10)
	#define PHYLNK (1 << 8)

	/* EIR */
	#define CRYPTEN (1 << 15)
	#define MODEXIF (1 << 14)
	#define HASHIF (1 << 13)
	#define AESIF (1 << 12)
	#define LINKIF (1 << 11)
	#define PKTIF (1 << 6)
	#define DMAIF (1 << 5)
	#define TXIF (1 << 3)
	#define TXABTIF (1 << 2)
	#define RXABTIF (1 << 1)
	#define PCFULIF (1 << 0)

	/* ECON1 */
	#define MODEXST (1 << 15)
	#define HASHEN (1 << 14)
	#define HASHOP (1 << 13)
	#define HASHLST (1 << 12)
	#define AESST (1 << 11)
	#define AESOP1 (1 << 10)
	#define AESOP0 (1 << 9)
	#define PKTDEC (1 << 8)
	#define FCOP1 (1 << 7)
	#define FCOP0 (1 << 6)
	#define DMAST (1 << 5)
	#define DMACPY (1 << 4)
	#define DMACSSD (1 << 3)
	#define DMANOCS (1 << 2)
	#define TXRTS (1 << 1)
	#define RXEN (1 << 0)

	/* ETXSTAT */
	#define LATECOL (1 << 10)
	#define MAXCOL (1 << 9)
	#define EXDEFER (1 << 8)
	#define ETXSTATL_DEFER (1 << 7)
	#define CRCBAD (1 << 4)
	#define COLCNT_MASK 0xF

	/* ERXFCON */
	#define HTEN (1 << 15)
	#define MPEN (1 << 14)
	#define NOTPM (1 << 12)
	#define PMEN3 (1 << 11)
	#define PMEN2 (1 << 10)
	#define PMEN1 (1 << 9)
	#define PMEN0 (1 << 8)
	#define CRCEEN (1 << 7)
	#define CRCEN (1 << 6)
	#define RUNTEEN (1 << 5)
	#define RUNTEN (1 << 4)
	#define UCEN (1 << 3)
	#define NOTMEEN (1 << 2)
	#define MCEN (1 << 1)
	#define BCEN (1 << 0)

	/* MACON1 */
	#define LOOPBK (1 << 4)
	#define RXPAUS (1 << 2)
	#define PASSALL (1 << 1)

	/* MACON2 */
	#define MACON2_DEFER (1 << 14)
	#define BPEN (1 << 13)
	#define NOBKOFF (1 << 12)
	#define PADCFG2 (1 << 7)
	#define PADCFG1 (1 << 6)
	#define PADCFG0 (1 << 5)
	#define TXCRCEN (1 << 4)
	#define PHDREN (1 << 3)
	#define HFRMEN (1 << 2)
	#define MACON2_RSV1 (1 << 1)
	#define FULDPX (1 << 0)

	/* MAIPG */
	/* value of the high byte is given by the reserved bits,
	* value of the low byte is recomended setting of the
	* IPG parameter.
	*/
	#define MAIPGH_VAL 0x0C
	#define MAIPGL_VAL 0x12

	/* MIREGADRH */
	#define MIREGADR_VAL (1 << 8)

	/* MIREGADRL */
	#define PHREG_MASK 0x1F

	/* MICMD */
	#define MIISCAN (1 << 1)
	#define MIIRD (1 << 0)

	/* MISTAT */
	#define NVALID (1 << 2)
	#define SCAN (1 << 1)
	#define BUSY (1 << 0)

	/* ECON2 */
	#define ETHEN (1 << 15)
	#define STRCH (1 << 14)
	#define TXMAC (1 << 13)
	#define SHA1MD5 (1 << 12)
	#define COCON3 (1 << 11)
	#define COCON2 (1 << 10)
	#define COCON1 (1 << 9)
	#define COCON0 (1 << 8)
	#define AUTOFC (1 << 7)
	#define TXRST (1 << 6)
	#define RXRST (1 << 5)
	#define ETHRST (1 << 4)
	#define MODLEN1 (1 << 3)
	#define MODLEN0 (1 << 2)
	#define AESLEN1 (1 << 1)
	#define AESLEN0 (1 << 0)

	/* EIE */
	#define INTIE (1 << 15)
	#define MODEXIE (1 << 14)
	#define HASHIE (1 << 13)
	#define AESIE (1 << 12)
	#define LINKIE (1 << 11)
	#define PKTIE (1 << 6)
	#define DMAIE (1 << 5)
	#define TXIE (1 << 3)
	#define TXABTIE (1 << 2)
	#define RXABTIE (1 << 1)
	#define PCFULIE (1 << 0)

	/* EIDLED */
	#define LACFG3 (1 << 15)
	#define LACFG2 (1 << 14)
	#define LACFG1 (1 << 13)
	#define LACFG0 (1 << 12)
	#define LBCFG3 (1 << 11)
	#define LBCFG2 (1 << 10)
	#define LBCFG1 (1 << 9)
	#define LBCFG0 (1 << 8)
	#define DEVID_SHIFT 5
	#define DEVID_MASK (0x7 << DEVID_SHIFT)
	#define REVID_SHIFT 0
	#define REVID_MASK (0x1F << REVID_SHIFT)

	/* PHY registers */
	#define PHCON1 0x00
	#define PHSTAT1 0x01
	#define PHANA 0x04
	#define PHANLPA 0x05
	#define PHANE 0x06
	#define PHCON2 0x11
	#define PHSTAT2 0x1B
	#define PHSTAT3 0x1F

	/* PHCON1 */
	#define PRST (1 << 15)
	#define PLOOPBK (1 << 14)
	#define SPD100 (1 << 13)
	#define ANEN (1 << 12)
	#define PSLEEP (1 << 11)
	#define RENEG (1 << 9)
	#define PFULDPX (1 << 8)

	/* PHSTAT1 */
	#define FULL100 (1 << 14)
	#define HALF100 (1 << 13)
	#define FULL10 (1 << 12)
	#define HALF10 (1 << 11)
	#define ANDONE (1 << 5)
	#define LRFAULT (1 << 4)
	#define ANABLE (1 << 3)
	#define LLSTAT (1 << 2)
	#define EXTREGS (1 << 0)

	/* PHSTAT2 */
	#define PLRITY (1 << 4)

	/* PHSTAT3 */
	#define PHY3SPD100 (1 << 3)
	#define PHY3DPX (1 << 4)
	#define SPDDPX_SHIFT 2
	#define SPDDPX_MASK (0x7 << SPDDPX_SHIFT)

	/* PHANA */
	/* Default value for PHY initialization*/
	#define PHANA_DEFAULT 0x05E1

	/* PHANE */
	#define PDFLT (1 << 4)
	#define LPARCD (1 << 1)
	#define LPANABL (1 << 0)

	#define EUDAST_TEST_VAL 0x1234

	#define TSV_SIZE 7

	#define ENCX24J600_DEV_ID 0x1

	/* Configuration */

	/* Led is on when the link is present and driven low
	* temporarily when packet is TX'd or RX'd
	*/
	#define LED_A_SETTINGS 0xC

	/* Led is on if the link is in 100 Mbps mode */
	#define LED_B_SETTINGS 0x8

	/* maximum ethernet frame length
	* Currently not used as a limit anywhere
	* (we're using the "huge frame enable" feature of
	* enc424j600).
	*/
	#define MAX_FRAMELEN 1518

	/* Size in bytes of the receive buffer in enc424j600.
	* Must be word aligned (even).
	*/
	#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)

	/* Start of the general purpose area in sram */
	#define SRAM_GP_START 0x0

	/* SRAM size */
	#define SRAM_SIZE 0x6000

	/* Start of the receive buffer */
	#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)

	#define RSV_RXLONGEVDROPEV 16
	#define RSV_CARRIEREV 18
	#define RSV_CRCERROR 20
	#define RSV_LENCHECKERR 21
	#define RSV_LENOUTOFRANGE 22
	#define RSV_RXOK 23
	#define RSV_RXMULTICAST 24
	#define RSV_RXBROADCAST 25
	#define RSV_DRIBBLENIBBLE 26
	#define RSV_RXCONTROLFRAME 27
	#define RSV_RXPAUSEFRAME 28
	#define RSV_RXUNKNOWNOPCODE 29
	#define RSV_RXTYPEVLAN 30

	#define RSV_RUNTFILTERMATCH 31
	#define RSV_NOTMEFILTERMATCH 32
	#define RSV_HASHFILTERMATCH 33
	#define RSV_MAGICPKTFILTERMATCH 34
	#define RSV_PTRNMTCHFILTERMATCH 35
	#define RSV_UNICASTFILTERMATCH 36

	#define RSV_SIZE 8
	#define RSV_BITMASK(x) (1 << ((x) - 16))
	#define RSV_GETBIT(x, y) (((x) & RSV_BITMASK(y)) ? 1 : 0)

	struct rsv {
	u16 next_packet;
	u16 len;
	u32 rxstat;
	};

	/* Put RX buffer at 0 as suggested by the Errata datasheet */

	#define RXSTART_INIT ERXST_VAL
	#define RXEND_INIT 0x5FFF

	int regmap_encx24j600_spi_write(void context, u8 reg, const u8 data,
	size_t count);
	int regmap_encx24j600_spi_read(void context, u8 reg, u8 data, size_t count);


	#endif