| /***************************************************************************** |
| * * |
| * File: cxgb2.c * |
| * $Revision: 1.25 $ * |
| * $Date: 2005/06/22 00:43:25 $ * |
| * Description: * |
| * Chelsio 10Gb Ethernet Driver. * |
| * * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License, version 2, as * |
| * published by the Free Software Foundation. * |
| * * |
| * You should have received a copy of the GNU General Public License along * |
| * with this program; if not, see <http://www.gnu.org/licenses/>. * |
| * * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * |
| * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * |
| * * |
| * http://www.chelsio.com * |
| * * |
| * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * |
| * All rights reserved. * |
| * * |
| * Maintainers: maintainers@chelsio.com * |
| * * |
| * Authors: Dimitrios Michailidis <dm@chelsio.com> * |
| * Tina Yang <tainay@chelsio.com> * |
| * Felix Marti <felix@chelsio.com> * |
| * Scott Bardone <sbardone@chelsio.com> * |
| * Kurt Ottaway <kottaway@chelsio.com> * |
| * Frank DiMambro <frank@chelsio.com> * |
| * * |
| * History: * |
| * * |
| ****************************************************************************/ |
| |
| #include "common.h" |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_vlan.h> |
| #include <linux/mii.h> |
| #include <linux/sockios.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/uaccess.h> |
| |
| #include "cpl5_cmd.h" |
| #include "regs.h" |
| #include "gmac.h" |
| #include "cphy.h" |
| #include "sge.h" |
| #include "tp.h" |
| #include "espi.h" |
| #include "elmer0.h" |
| |
| #include <linux/workqueue.h> |
| |
| static inline void schedule_mac_stats_update(struct adapter *ap, int secs) |
| { |
| schedule_delayed_work(&ap->stats_update_task, secs * HZ); |
| } |
| |
| static inline void cancel_mac_stats_update(struct adapter *ap) |
| { |
| cancel_delayed_work(&ap->stats_update_task); |
| } |
| |
| #define MAX_CMDQ_ENTRIES 16384 |
| #define MAX_CMDQ1_ENTRIES 1024 |
| #define MAX_RX_BUFFERS 16384 |
| #define MAX_RX_JUMBO_BUFFERS 16384 |
| #define MAX_TX_BUFFERS_HIGH 16384U |
| #define MAX_TX_BUFFERS_LOW 1536U |
| #define MAX_TX_BUFFERS 1460U |
| #define MIN_FL_ENTRIES 32 |
| |
| #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ |
| NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ |
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) |
| |
| /* |
| * The EEPROM is actually bigger but only the first few bytes are used so we |
| * only report those. |
| */ |
| #define EEPROM_SIZE 32 |
| |
| MODULE_DESCRIPTION(DRV_DESCRIPTION); |
| MODULE_AUTHOR("Chelsio Communications"); |
| MODULE_LICENSE("GPL"); |
| |
| static int dflt_msg_enable = DFLT_MSG_ENABLE; |
| |
| module_param(dflt_msg_enable, int, 0); |
| MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 default message enable bitmap"); |
| |
| #define HCLOCK 0x0 |
| #define LCLOCK 0x1 |
| |
| /* T1 cards powersave mode */ |
| static int t1_clock(struct adapter *adapter, int mode); |
| static int t1powersave = 1; /* HW default is powersave mode. */ |
| |
| module_param(t1powersave, int, 0); |
| MODULE_PARM_DESC(t1powersave, "Enable/Disable T1 powersaving mode"); |
| |
| static int disable_msi = 0; |
| module_param(disable_msi, int, 0); |
| MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); |
| |
| static const char pci_speed[][4] = { |
| "33", "66", "100", "133" |
| }; |
| |
| /* |
| * Setup MAC to receive the types of packets we want. |
| */ |
| static void t1_set_rxmode(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct cmac *mac = adapter->port[dev->if_port].mac; |
| struct t1_rx_mode rm; |
| |
| rm.dev = dev; |
| mac->ops->set_rx_mode(mac, &rm); |
| } |
| |
| static void link_report(struct port_info *p) |
| { |
| if (!netif_carrier_ok(p->dev)) |
| netdev_info(p->dev, "link down\n"); |
| else { |
| const char *s = "10Mbps"; |
| |
| switch (p->link_config.speed) { |
| case SPEED_10000: s = "10Gbps"; break; |
| case SPEED_1000: s = "1000Mbps"; break; |
| case SPEED_100: s = "100Mbps"; break; |
| } |
| |
| netdev_info(p->dev, "link up, %s, %s-duplex\n", |
| s, p->link_config.duplex == DUPLEX_FULL |
| ? "full" : "half"); |
| } |
| } |
| |
| void t1_link_negotiated(struct adapter *adapter, int port_id, int link_stat, |
| int speed, int duplex, int pause) |
| { |
| struct port_info *p = &adapter->port[port_id]; |
| |
| if (link_stat != netif_carrier_ok(p->dev)) { |
| if (link_stat) |
| netif_carrier_on(p->dev); |
| else |
| netif_carrier_off(p->dev); |
| link_report(p); |
| |
| /* multi-ports: inform toe */ |
| if ((speed > 0) && (adapter->params.nports > 1)) { |
| unsigned int sched_speed = 10; |
| switch (speed) { |
| case SPEED_1000: |
| sched_speed = 1000; |
| break; |
| case SPEED_100: |
| sched_speed = 100; |
| break; |
| case SPEED_10: |
| sched_speed = 10; |
| break; |
| } |
| t1_sched_update_parms(adapter->sge, port_id, 0, sched_speed); |
| } |
| } |
| } |
| |
| static void link_start(struct port_info *p) |
| { |
| struct cmac *mac = p->mac; |
| |
| mac->ops->reset(mac); |
| if (mac->ops->macaddress_set) |
| mac->ops->macaddress_set(mac, p->dev->dev_addr); |
| t1_set_rxmode(p->dev); |
| t1_link_start(p->phy, mac, &p->link_config); |
| mac->ops->enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); |
| } |
| |
| static void enable_hw_csum(struct adapter *adapter) |
| { |
| if (adapter->port[0].dev->hw_features & NETIF_F_TSO) |
| t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */ |
| t1_tp_set_tcp_checksum_offload(adapter->tp, 1); |
| } |
| |
| /* |
| * Things to do upon first use of a card. |
| * This must run with the rtnl lock held. |
| */ |
| static int cxgb_up(struct adapter *adapter) |
| { |
| int err = 0; |
| |
| if (!(adapter->flags & FULL_INIT_DONE)) { |
| err = t1_init_hw_modules(adapter); |
| if (err) |
| goto out_err; |
| |
| enable_hw_csum(adapter); |
| adapter->flags |= FULL_INIT_DONE; |
| } |
| |
| t1_interrupts_clear(adapter); |
| |
| adapter->params.has_msi = !disable_msi && !pci_enable_msi(adapter->pdev); |
| err = request_irq(adapter->pdev->irq, t1_interrupt, |
| adapter->params.has_msi ? 0 : IRQF_SHARED, |
| adapter->name, adapter); |
| if (err) { |
| if (adapter->params.has_msi) |
| pci_disable_msi(adapter->pdev); |
| |
| goto out_err; |
| } |
| |
| t1_sge_start(adapter->sge); |
| t1_interrupts_enable(adapter); |
| out_err: |
| return err; |
| } |
| |
| /* |
| * Release resources when all the ports have been stopped. |
| */ |
| static void cxgb_down(struct adapter *adapter) |
| { |
| t1_sge_stop(adapter->sge); |
| t1_interrupts_disable(adapter); |
| free_irq(adapter->pdev->irq, adapter); |
| if (adapter->params.has_msi) |
| pci_disable_msi(adapter->pdev); |
| } |
| |
| static int cxgb_open(struct net_device *dev) |
| { |
| int err; |
| struct adapter *adapter = dev->ml_priv; |
| int other_ports = adapter->open_device_map & PORT_MASK; |
| |
| napi_enable(&adapter->napi); |
| if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) { |
| napi_disable(&adapter->napi); |
| return err; |
| } |
| |
| __set_bit(dev->if_port, &adapter->open_device_map); |
| link_start(&adapter->port[dev->if_port]); |
| netif_start_queue(dev); |
| if (!other_ports && adapter->params.stats_update_period) |
| schedule_mac_stats_update(adapter, |
| adapter->params.stats_update_period); |
| |
| t1_vlan_mode(adapter, dev->features); |
| return 0; |
| } |
| |
| static int cxgb_close(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| struct cmac *mac = p->mac; |
| |
| netif_stop_queue(dev); |
| napi_disable(&adapter->napi); |
| mac->ops->disable(mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); |
| netif_carrier_off(dev); |
| |
| clear_bit(dev->if_port, &adapter->open_device_map); |
| if (adapter->params.stats_update_period && |
| !(adapter->open_device_map & PORT_MASK)) { |
| /* Stop statistics accumulation. */ |
| smp_mb__after_atomic(); |
| spin_lock(&adapter->work_lock); /* sync with update task */ |
| spin_unlock(&adapter->work_lock); |
| cancel_mac_stats_update(adapter); |
| } |
| |
| if (!adapter->open_device_map) |
| cxgb_down(adapter); |
| return 0; |
| } |
| |
| static struct net_device_stats *t1_get_stats(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| struct net_device_stats *ns = &dev->stats; |
| const struct cmac_statistics *pstats; |
| |
| /* Do a full update of the MAC stats */ |
| pstats = p->mac->ops->statistics_update(p->mac, |
| MAC_STATS_UPDATE_FULL); |
| |
| ns->tx_packets = pstats->TxUnicastFramesOK + |
| pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK; |
| |
| ns->rx_packets = pstats->RxUnicastFramesOK + |
| pstats->RxMulticastFramesOK + pstats->RxBroadcastFramesOK; |
| |
| ns->tx_bytes = pstats->TxOctetsOK; |
| ns->rx_bytes = pstats->RxOctetsOK; |
| |
| ns->tx_errors = pstats->TxLateCollisions + pstats->TxLengthErrors + |
| pstats->TxUnderrun + pstats->TxFramesAbortedDueToXSCollisions; |
| ns->rx_errors = pstats->RxDataErrors + pstats->RxJabberErrors + |
| pstats->RxFCSErrors + pstats->RxAlignErrors + |
| pstats->RxSequenceErrors + pstats->RxFrameTooLongErrors + |
| pstats->RxSymbolErrors + pstats->RxRuntErrors; |
| |
| ns->multicast = pstats->RxMulticastFramesOK; |
| ns->collisions = pstats->TxTotalCollisions; |
| |
| /* detailed rx_errors */ |
| ns->rx_length_errors = pstats->RxFrameTooLongErrors + |
| pstats->RxJabberErrors; |
| ns->rx_over_errors = 0; |
| ns->rx_crc_errors = pstats->RxFCSErrors; |
| ns->rx_frame_errors = pstats->RxAlignErrors; |
| ns->rx_fifo_errors = 0; |
| ns->rx_missed_errors = 0; |
| |
| /* detailed tx_errors */ |
| ns->tx_aborted_errors = pstats->TxFramesAbortedDueToXSCollisions; |
| ns->tx_carrier_errors = 0; |
| ns->tx_fifo_errors = pstats->TxUnderrun; |
| ns->tx_heartbeat_errors = 0; |
| ns->tx_window_errors = pstats->TxLateCollisions; |
| return ns; |
| } |
| |
| static u32 get_msglevel(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| |
| return adapter->msg_enable; |
| } |
| |
| static void set_msglevel(struct net_device *dev, u32 val) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| |
| adapter->msg_enable = val; |
| } |
| |
| static const char stats_strings[][ETH_GSTRING_LEN] = { |
| "TxOctetsOK", |
| "TxOctetsBad", |
| "TxUnicastFramesOK", |
| "TxMulticastFramesOK", |
| "TxBroadcastFramesOK", |
| "TxPauseFrames", |
| "TxFramesWithDeferredXmissions", |
| "TxLateCollisions", |
| "TxTotalCollisions", |
| "TxFramesAbortedDueToXSCollisions", |
| "TxUnderrun", |
| "TxLengthErrors", |
| "TxInternalMACXmitError", |
| "TxFramesWithExcessiveDeferral", |
| "TxFCSErrors", |
| "TxJumboFramesOk", |
| "TxJumboOctetsOk", |
| |
| "RxOctetsOK", |
| "RxOctetsBad", |
| "RxUnicastFramesOK", |
| "RxMulticastFramesOK", |
| "RxBroadcastFramesOK", |
| "RxPauseFrames", |
| "RxFCSErrors", |
| "RxAlignErrors", |
| "RxSymbolErrors", |
| "RxDataErrors", |
| "RxSequenceErrors", |
| "RxRuntErrors", |
| "RxJabberErrors", |
| "RxInternalMACRcvError", |
| "RxInRangeLengthErrors", |
| "RxOutOfRangeLengthField", |
| "RxFrameTooLongErrors", |
| "RxJumboFramesOk", |
| "RxJumboOctetsOk", |
| |
| /* Port stats */ |
| "RxCsumGood", |
| "TxCsumOffload", |
| "TxTso", |
| "RxVlan", |
| "TxVlan", |
| "TxNeedHeadroom", |
| |
| /* Interrupt stats */ |
| "rx drops", |
| "pure_rsps", |
| "unhandled irqs", |
| "respQ_empty", |
| "respQ_overflow", |
| "freelistQ_empty", |
| "pkt_too_big", |
| "pkt_mismatch", |
| "cmdQ_full0", |
| "cmdQ_full1", |
| |
| "espi_DIP2ParityErr", |
| "espi_DIP4Err", |
| "espi_RxDrops", |
| "espi_TxDrops", |
| "espi_RxOvfl", |
| "espi_ParityErr" |
| }; |
| |
| #define T2_REGMAP_SIZE (3 * 1024) |
| |
| static int get_regs_len(struct net_device *dev) |
| { |
| return T2_REGMAP_SIZE; |
| } |
| |
| static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| |
| strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
| strlcpy(info->bus_info, pci_name(adapter->pdev), |
| sizeof(info->bus_info)); |
| } |
| |
| static int get_sset_count(struct net_device *dev, int sset) |
| { |
| switch (sset) { |
| case ETH_SS_STATS: |
| return ARRAY_SIZE(stats_strings); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static void get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| { |
| if (stringset == ETH_SS_STATS) |
| memcpy(data, stats_strings, sizeof(stats_strings)); |
| } |
| |
| static void get_stats(struct net_device *dev, struct ethtool_stats *stats, |
| u64 *data) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct cmac *mac = adapter->port[dev->if_port].mac; |
| const struct cmac_statistics *s; |
| const struct sge_intr_counts *t; |
| struct sge_port_stats ss; |
| |
| s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); |
| t = t1_sge_get_intr_counts(adapter->sge); |
| t1_sge_get_port_stats(adapter->sge, dev->if_port, &ss); |
| |
| *data++ = s->TxOctetsOK; |
| *data++ = s->TxOctetsBad; |
| *data++ = s->TxUnicastFramesOK; |
| *data++ = s->TxMulticastFramesOK; |
| *data++ = s->TxBroadcastFramesOK; |
| *data++ = s->TxPauseFrames; |
| *data++ = s->TxFramesWithDeferredXmissions; |
| *data++ = s->TxLateCollisions; |
| *data++ = s->TxTotalCollisions; |
| *data++ = s->TxFramesAbortedDueToXSCollisions; |
| *data++ = s->TxUnderrun; |
| *data++ = s->TxLengthErrors; |
| *data++ = s->TxInternalMACXmitError; |
| *data++ = s->TxFramesWithExcessiveDeferral; |
| *data++ = s->TxFCSErrors; |
| *data++ = s->TxJumboFramesOK; |
| *data++ = s->TxJumboOctetsOK; |
| |
| *data++ = s->RxOctetsOK; |
| *data++ = s->RxOctetsBad; |
| *data++ = s->RxUnicastFramesOK; |
| *data++ = s->RxMulticastFramesOK; |
| *data++ = s->RxBroadcastFramesOK; |
| *data++ = s->RxPauseFrames; |
| *data++ = s->RxFCSErrors; |
| *data++ = s->RxAlignErrors; |
| *data++ = s->RxSymbolErrors; |
| *data++ = s->RxDataErrors; |
| *data++ = s->RxSequenceErrors; |
| *data++ = s->RxRuntErrors; |
| *data++ = s->RxJabberErrors; |
| *data++ = s->RxInternalMACRcvError; |
| *data++ = s->RxInRangeLengthErrors; |
| *data++ = s->RxOutOfRangeLengthField; |
| *data++ = s->RxFrameTooLongErrors; |
| *data++ = s->RxJumboFramesOK; |
| *data++ = s->RxJumboOctetsOK; |
| |
| *data++ = ss.rx_cso_good; |
| *data++ = ss.tx_cso; |
| *data++ = ss.tx_tso; |
| *data++ = ss.vlan_xtract; |
| *data++ = ss.vlan_insert; |
| *data++ = ss.tx_need_hdrroom; |
| |
| *data++ = t->rx_drops; |
| *data++ = t->pure_rsps; |
| *data++ = t->unhandled_irqs; |
| *data++ = t->respQ_empty; |
| *data++ = t->respQ_overflow; |
| *data++ = t->freelistQ_empty; |
| *data++ = t->pkt_too_big; |
| *data++ = t->pkt_mismatch; |
| *data++ = t->cmdQ_full[0]; |
| *data++ = t->cmdQ_full[1]; |
| |
| if (adapter->espi) { |
| const struct espi_intr_counts *e; |
| |
| e = t1_espi_get_intr_counts(adapter->espi); |
| *data++ = e->DIP2_parity_err; |
| *data++ = e->DIP4_err; |
| *data++ = e->rx_drops; |
| *data++ = e->tx_drops; |
| *data++ = e->rx_ovflw; |
| *data++ = e->parity_err; |
| } |
| } |
| |
| static inline void reg_block_dump(struct adapter *ap, void *buf, |
| unsigned int start, unsigned int end) |
| { |
| u32 *p = buf + start; |
| |
| for ( ; start <= end; start += sizeof(u32)) |
| *p++ = readl(ap->regs + start); |
| } |
| |
| static void get_regs(struct net_device *dev, struct ethtool_regs *regs, |
| void *buf) |
| { |
| struct adapter *ap = dev->ml_priv; |
| |
| /* |
| * Version scheme: bits 0..9: chip version, bits 10..15: chip revision |
| */ |
| regs->version = 2; |
| |
| memset(buf, 0, T2_REGMAP_SIZE); |
| reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER); |
| reg_block_dump(ap, buf, A_MC3_CFG, A_MC4_INT_CAUSE); |
| reg_block_dump(ap, buf, A_TPI_ADDR, A_TPI_PAR); |
| reg_block_dump(ap, buf, A_TP_IN_CONFIG, A_TP_TX_DROP_COUNT); |
| reg_block_dump(ap, buf, A_RAT_ROUTE_CONTROL, A_RAT_INTR_CAUSE); |
| reg_block_dump(ap, buf, A_CSPI_RX_AE_WM, A_CSPI_INTR_ENABLE); |
| reg_block_dump(ap, buf, A_ESPI_SCH_TOKEN0, A_ESPI_GOSTAT); |
| reg_block_dump(ap, buf, A_ULP_ULIMIT, A_ULP_PIO_CTRL); |
| reg_block_dump(ap, buf, A_PL_ENABLE, A_PL_CAUSE); |
| reg_block_dump(ap, buf, A_MC5_CONFIG, A_MC5_MASK_WRITE_CMD); |
| } |
| |
| static int get_link_ksettings(struct net_device *dev, |
| struct ethtool_link_ksettings *cmd) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| u32 supported, advertising; |
| |
| supported = p->link_config.supported; |
| advertising = p->link_config.advertising; |
| |
| if (netif_carrier_ok(dev)) { |
| cmd->base.speed = p->link_config.speed; |
| cmd->base.duplex = p->link_config.duplex; |
| } else { |
| cmd->base.speed = SPEED_UNKNOWN; |
| cmd->base.duplex = DUPLEX_UNKNOWN; |
| } |
| |
| cmd->base.port = (supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; |
| cmd->base.phy_address = p->phy->mdio.prtad; |
| cmd->base.autoneg = p->link_config.autoneg; |
| |
| ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, |
| supported); |
| ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, |
| advertising); |
| |
| return 0; |
| } |
| |
| static int speed_duplex_to_caps(int speed, int duplex) |
| { |
| int cap = 0; |
| |
| switch (speed) { |
| case SPEED_10: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_10baseT_Full; |
| else |
| cap = SUPPORTED_10baseT_Half; |
| break; |
| case SPEED_100: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_100baseT_Full; |
| else |
| cap = SUPPORTED_100baseT_Half; |
| break; |
| case SPEED_1000: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_1000baseT_Full; |
| else |
| cap = SUPPORTED_1000baseT_Half; |
| break; |
| case SPEED_10000: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_10000baseT_Full; |
| } |
| return cap; |
| } |
| |
| #define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ |
| ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ |
| ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ |
| ADVERTISED_10000baseT_Full) |
| |
| static int set_link_ksettings(struct net_device *dev, |
| const struct ethtool_link_ksettings *cmd) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| struct link_config *lc = &p->link_config; |
| u32 advertising; |
| |
| ethtool_convert_link_mode_to_legacy_u32(&advertising, |
| cmd->link_modes.advertising); |
| |
| if (!(lc->supported & SUPPORTED_Autoneg)) |
| return -EOPNOTSUPP; /* can't change speed/duplex */ |
| |
| if (cmd->base.autoneg == AUTONEG_DISABLE) { |
| u32 speed = cmd->base.speed; |
| int cap = speed_duplex_to_caps(speed, cmd->base.duplex); |
| |
| if (!(lc->supported & cap) || (speed == SPEED_1000)) |
| return -EINVAL; |
| lc->requested_speed = speed; |
| lc->requested_duplex = cmd->base.duplex; |
| lc->advertising = 0; |
| } else { |
| advertising &= ADVERTISED_MASK; |
| if (advertising & (advertising - 1)) |
| advertising = lc->supported; |
| advertising &= lc->supported; |
| if (!advertising) |
| return -EINVAL; |
| lc->requested_speed = SPEED_INVALID; |
| lc->requested_duplex = DUPLEX_INVALID; |
| lc->advertising = advertising | ADVERTISED_Autoneg; |
| } |
| lc->autoneg = cmd->base.autoneg; |
| if (netif_running(dev)) |
| t1_link_start(p->phy, p->mac, lc); |
| return 0; |
| } |
| |
| static void get_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| |
| epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; |
| epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; |
| epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; |
| } |
| |
| static int set_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| struct link_config *lc = &p->link_config; |
| |
| if (epause->autoneg == AUTONEG_DISABLE) |
| lc->requested_fc = 0; |
| else if (lc->supported & SUPPORTED_Autoneg) |
| lc->requested_fc = PAUSE_AUTONEG; |
| else |
| return -EINVAL; |
| |
| if (epause->rx_pause) |
| lc->requested_fc |= PAUSE_RX; |
| if (epause->tx_pause) |
| lc->requested_fc |= PAUSE_TX; |
| if (lc->autoneg == AUTONEG_ENABLE) { |
| if (netif_running(dev)) |
| t1_link_start(p->phy, p->mac, lc); |
| } else { |
| lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); |
| if (netif_running(dev)) |
| p->mac->ops->set_speed_duplex_fc(p->mac, -1, -1, |
| lc->fc); |
| } |
| return 0; |
| } |
| |
| static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; |
| |
| e->rx_max_pending = MAX_RX_BUFFERS; |
| e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; |
| e->tx_max_pending = MAX_CMDQ_ENTRIES; |
| |
| e->rx_pending = adapter->params.sge.freelQ_size[!jumbo_fl]; |
| e->rx_jumbo_pending = adapter->params.sge.freelQ_size[jumbo_fl]; |
| e->tx_pending = adapter->params.sge.cmdQ_size[0]; |
| } |
| |
| static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; |
| |
| if (e->rx_pending > MAX_RX_BUFFERS || e->rx_mini_pending || |
| e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || |
| e->tx_pending > MAX_CMDQ_ENTRIES || |
| e->rx_pending < MIN_FL_ENTRIES || |
| e->rx_jumbo_pending < MIN_FL_ENTRIES || |
| e->tx_pending < (adapter->params.nports + 1) * (MAX_SKB_FRAGS + 1)) |
| return -EINVAL; |
| |
| if (adapter->flags & FULL_INIT_DONE) |
| return -EBUSY; |
| |
| adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; |
| adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; |
| adapter->params.sge.cmdQ_size[0] = e->tx_pending; |
| adapter->params.sge.cmdQ_size[1] = e->tx_pending > MAX_CMDQ1_ENTRIES ? |
| MAX_CMDQ1_ENTRIES : e->tx_pending; |
| return 0; |
| } |
| |
| static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| |
| adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; |
| adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; |
| adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; |
| t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); |
| return 0; |
| } |
| |
| static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| |
| c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; |
| c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; |
| c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; |
| return 0; |
| } |
| |
| static int get_eeprom_len(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| |
| return t1_is_asic(adapter) ? EEPROM_SIZE : 0; |
| } |
| |
| #define EEPROM_MAGIC(ap) \ |
| (PCI_VENDOR_ID_CHELSIO | ((ap)->params.chip_version << 16)) |
| |
| static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, |
| u8 *data) |
| { |
| int i; |
| u8 buf[EEPROM_SIZE] __attribute__((aligned(4))); |
| struct adapter *adapter = dev->ml_priv; |
| |
| e->magic = EEPROM_MAGIC(adapter); |
| for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32)) |
| t1_seeprom_read(adapter, i, (__le32 *)&buf[i]); |
| memcpy(data, buf + e->offset, e->len); |
| return 0; |
| } |
| |
| static const struct ethtool_ops t1_ethtool_ops = { |
| .get_drvinfo = get_drvinfo, |
| .get_msglevel = get_msglevel, |
| .set_msglevel = set_msglevel, |
| .get_ringparam = get_sge_param, |
| .set_ringparam = set_sge_param, |
| .get_coalesce = get_coalesce, |
| .set_coalesce = set_coalesce, |
| .get_eeprom_len = get_eeprom_len, |
| .get_eeprom = get_eeprom, |
| .get_pauseparam = get_pauseparam, |
| .set_pauseparam = set_pauseparam, |
| .get_link = ethtool_op_get_link, |
| .get_strings = get_strings, |
| .get_sset_count = get_sset_count, |
| .get_ethtool_stats = get_stats, |
| .get_regs_len = get_regs_len, |
| .get_regs = get_regs, |
| .get_link_ksettings = get_link_ksettings, |
| .set_link_ksettings = set_link_ksettings, |
| }; |
| |
| static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct mdio_if_info *mdio = &adapter->port[dev->if_port].phy->mdio; |
| |
| return mdio_mii_ioctl(mdio, if_mii(req), cmd); |
| } |
| |
| static int t1_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| int ret; |
| struct adapter *adapter = dev->ml_priv; |
| struct cmac *mac = adapter->port[dev->if_port].mac; |
| |
| if (!mac->ops->set_mtu) |
| return -EOPNOTSUPP; |
| if ((ret = mac->ops->set_mtu(mac, new_mtu))) |
| return ret; |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| static int t1_set_mac_addr(struct net_device *dev, void *p) |
| { |
| struct adapter *adapter = dev->ml_priv; |
| struct cmac *mac = adapter->port[dev->if_port].mac; |
| struct sockaddr *addr = p; |
| |
| if (!mac->ops->macaddress_set) |
| return -EOPNOTSUPP; |
| |
| memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); |
| mac->ops->macaddress_set(mac, dev->dev_addr); |
| return 0; |
| } |
| |
| static netdev_features_t t1_fix_features(struct net_device *dev, |
| netdev_features_t features) |
| { |
| /* |
| * Since there is no support for separate rx/tx vlan accel |
| * enable/disable make sure tx flag is always in same state as rx. |
| */ |
| if (features & NETIF_F_HW_VLAN_CTAG_RX) |
| features |= NETIF_F_HW_VLAN_CTAG_TX; |
| else |
| features &= ~NETIF_F_HW_VLAN_CTAG_TX; |
| |
| return features; |
| } |
| |
| static int t1_set_features(struct net_device *dev, netdev_features_t features) |
| { |
| netdev_features_t changed = dev->features ^ features; |
| struct adapter *adapter = dev->ml_priv; |
| |
| if (changed & NETIF_F_HW_VLAN_CTAG_RX) |
| t1_vlan_mode(adapter, features); |
| |
| return 0; |
| } |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void t1_netpoll(struct net_device *dev) |
| { |
| unsigned long flags; |
| struct adapter *adapter = dev->ml_priv; |
| |
| local_irq_save(flags); |
| t1_interrupt(adapter->pdev->irq, adapter); |
| local_irq_restore(flags); |
| } |
| #endif |
| |
| /* |
| * Periodic accumulation of MAC statistics. This is used only if the MAC |
| * does not have any other way to prevent stats counter overflow. |
| */ |
| static void mac_stats_task(struct work_struct *work) |
| { |
| int i; |
| struct adapter *adapter = |
| container_of(work, struct adapter, stats_update_task.work); |
| |
| for_each_port(adapter, i) { |
| struct port_info *p = &adapter->port[i]; |
| |
| if (netif_running(p->dev)) |
| p->mac->ops->statistics_update(p->mac, |
| MAC_STATS_UPDATE_FAST); |
| } |
| |
| /* Schedule the next statistics update if any port is active. */ |
| spin_lock(&adapter->work_lock); |
| if (adapter->open_device_map & PORT_MASK) |
| schedule_mac_stats_update(adapter, |
| adapter->params.stats_update_period); |
| spin_unlock(&adapter->work_lock); |
| } |
| |
| /* |
| * Processes elmer0 external interrupts in process context. |
| */ |
| static void ext_intr_task(struct work_struct *work) |
| { |
| struct adapter *adapter = |
| container_of(work, struct adapter, ext_intr_handler_task); |
| |
| t1_elmer0_ext_intr_handler(adapter); |
| |
| /* Now reenable external interrupts */ |
| spin_lock_irq(&adapter->async_lock); |
| adapter->slow_intr_mask |= F_PL_INTR_EXT; |
| writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); |
| writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, |
| adapter->regs + A_PL_ENABLE); |
| spin_unlock_irq(&adapter->async_lock); |
| } |
| |
| /* |
| * Interrupt-context handler for elmer0 external interrupts. |
| */ |
| void t1_elmer0_ext_intr(struct adapter *adapter) |
| { |
| /* |
| * Schedule a task to handle external interrupts as we require |
| * a process context. We disable EXT interrupts in the interim |
| * and let the task reenable them when it's done. |
| */ |
| adapter->slow_intr_mask &= ~F_PL_INTR_EXT; |
| writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, |
| adapter->regs + A_PL_ENABLE); |
| schedule_work(&adapter->ext_intr_handler_task); |
| } |
| |
| void t1_fatal_err(struct adapter *adapter) |
| { |
| if (adapter->flags & FULL_INIT_DONE) { |
| t1_sge_stop(adapter->sge); |
| t1_interrupts_disable(adapter); |
| } |
| pr_alert("%s: encountered fatal error, operation suspended\n", |
| adapter->name); |
| } |
| |
| static const struct net_device_ops cxgb_netdev_ops = { |
| .ndo_open = cxgb_open, |
| .ndo_stop = cxgb_close, |
| .ndo_start_xmit = t1_start_xmit, |
| .ndo_get_stats = t1_get_stats, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_rx_mode = t1_set_rxmode, |
| .ndo_do_ioctl = t1_ioctl, |
| .ndo_change_mtu = t1_change_mtu, |
| .ndo_set_mac_address = t1_set_mac_addr, |
| .ndo_fix_features = t1_fix_features, |
| .ndo_set_features = t1_set_features, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = t1_netpoll, |
| #endif |
| }; |
| |
| static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| int i, err, pci_using_dac = 0; |
| unsigned long mmio_start, mmio_len; |
| const struct board_info *bi; |
| struct adapter *adapter = NULL; |
| struct port_info *pi; |
| |
| pr_info_once("%s - version %s\n", DRV_DESCRIPTION, DRV_VERSION); |
| |
| err = pci_enable_device(pdev); |
| if (err) |
| return err; |
| |
| if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { |
| pr_err("%s: cannot find PCI device memory base address\n", |
| pci_name(pdev)); |
| err = -ENODEV; |
| goto out_disable_pdev; |
| } |
| |
| if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { |
| pci_using_dac = 1; |
| |
| if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { |
| pr_err("%s: unable to obtain 64-bit DMA for " |
| "consistent allocations\n", pci_name(pdev)); |
| err = -ENODEV; |
| goto out_disable_pdev; |
| } |
| |
| } else if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) { |
| pr_err("%s: no usable DMA configuration\n", pci_name(pdev)); |
| goto out_disable_pdev; |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) { |
| pr_err("%s: cannot obtain PCI resources\n", pci_name(pdev)); |
| goto out_disable_pdev; |
| } |
| |
| pci_set_master(pdev); |
| |
| mmio_start = pci_resource_start(pdev, 0); |
| mmio_len = pci_resource_len(pdev, 0); |
| bi = t1_get_board_info(ent->driver_data); |
| |
| for (i = 0; i < bi->port_number; ++i) { |
| struct net_device *netdev; |
| |
| netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter)); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto out_free_dev; |
| } |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| if (!adapter) { |
| adapter = netdev_priv(netdev); |
| adapter->pdev = pdev; |
| adapter->port[0].dev = netdev; /* so we don't leak it */ |
| |
| adapter->regs = ioremap(mmio_start, mmio_len); |
| if (!adapter->regs) { |
| pr_err("%s: cannot map device registers\n", |
| pci_name(pdev)); |
| err = -ENOMEM; |
| goto out_free_dev; |
| } |
| |
| if (t1_get_board_rev(adapter, bi, &adapter->params)) { |
| err = -ENODEV; /* Can't handle this chip rev */ |
| goto out_free_dev; |
| } |
| |
| adapter->name = pci_name(pdev); |
| adapter->msg_enable = dflt_msg_enable; |
| adapter->mmio_len = mmio_len; |
| |
| spin_lock_init(&adapter->tpi_lock); |
| spin_lock_init(&adapter->work_lock); |
| spin_lock_init(&adapter->async_lock); |
| spin_lock_init(&adapter->mac_lock); |
| |
| INIT_WORK(&adapter->ext_intr_handler_task, |
| ext_intr_task); |
| INIT_DELAYED_WORK(&adapter->stats_update_task, |
| mac_stats_task); |
| |
| pci_set_drvdata(pdev, netdev); |
| } |
| |
| pi = &adapter->port[i]; |
| pi->dev = netdev; |
| netif_carrier_off(netdev); |
| netdev->irq = pdev->irq; |
| netdev->if_port = i; |
| netdev->mem_start = mmio_start; |
| netdev->mem_end = mmio_start + mmio_len - 1; |
| netdev->ml_priv = adapter; |
| netdev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM | |
| NETIF_F_RXCSUM; |
| netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | |
| NETIF_F_RXCSUM | NETIF_F_LLTX; |
| |
| if (pci_using_dac) |
| netdev->features |= NETIF_F_HIGHDMA; |
| if (vlan_tso_capable(adapter)) { |
| netdev->features |= |
| NETIF_F_HW_VLAN_CTAG_TX | |
| NETIF_F_HW_VLAN_CTAG_RX; |
| netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX; |
| |
| /* T204: disable TSO */ |
| if (!(is_T2(adapter)) || bi->port_number != 4) { |
| netdev->hw_features |= NETIF_F_TSO; |
| netdev->features |= NETIF_F_TSO; |
| } |
| } |
| |
| netdev->netdev_ops = &cxgb_netdev_ops; |
| netdev->hard_header_len += (netdev->hw_features & NETIF_F_TSO) ? |
| sizeof(struct cpl_tx_pkt_lso) : sizeof(struct cpl_tx_pkt); |
| |
| netif_napi_add(netdev, &adapter->napi, t1_poll, 64); |
| |
| netdev->ethtool_ops = &t1_ethtool_ops; |
| |
| switch (bi->board) { |
| case CHBT_BOARD_CHT110: |
| case CHBT_BOARD_N110: |
| case CHBT_BOARD_N210: |
| case CHBT_BOARD_CHT210: |
| netdev->max_mtu = PM3393_MAX_FRAME_SIZE - |
| (ETH_HLEN + ETH_FCS_LEN); |
| break; |
| case CHBT_BOARD_CHN204: |
| netdev->max_mtu = VSC7326_MAX_MTU; |
| break; |
| default: |
| netdev->max_mtu = ETH_DATA_LEN; |
| break; |
| } |
| } |
| |
| if (t1_init_sw_modules(adapter, bi) < 0) { |
| err = -ENODEV; |
| goto out_free_dev; |
| } |
| |
| /* |
| * The card is now ready to go. If any errors occur during device |
| * registration we do not fail the whole card but rather proceed only |
| * with the ports we manage to register successfully. However we must |
| * register at least one net device. |
| */ |
| for (i = 0; i < bi->port_number; ++i) { |
| err = register_netdev(adapter->port[i].dev); |
| if (err) |
| pr_warn("%s: cannot register net device %s, skipping\n", |
| pci_name(pdev), adapter->port[i].dev->name); |
| else { |
| /* |
| * Change the name we use for messages to the name of |
| * the first successfully registered interface. |
| */ |
| if (!adapter->registered_device_map) |
| adapter->name = adapter->port[i].dev->name; |
| |
| __set_bit(i, &adapter->registered_device_map); |
| } |
| } |
| if (!adapter->registered_device_map) { |
| pr_err("%s: could not register any net devices\n", |
| pci_name(pdev)); |
| err = -EINVAL; |
| goto out_release_adapter_res; |
| } |
| |
| pr_info("%s: %s (rev %d), %s %dMHz/%d-bit\n", |
| adapter->name, bi->desc, adapter->params.chip_revision, |
| adapter->params.pci.is_pcix ? "PCIX" : "PCI", |
| adapter->params.pci.speed, adapter->params.pci.width); |
| |
| /* |
| * Set the T1B ASIC and memory clocks. |
| */ |
| if (t1powersave) |
| adapter->t1powersave = LCLOCK; /* HW default is powersave mode. */ |
| else |
| adapter->t1powersave = HCLOCK; |
| if (t1_is_T1B(adapter)) |
| t1_clock(adapter, t1powersave); |
| |
| return 0; |
| |
| out_release_adapter_res: |
| t1_free_sw_modules(adapter); |
| out_free_dev: |
| if (adapter) { |
| if (adapter->regs) |
| iounmap(adapter->regs); |
| for (i = bi->port_number - 1; i >= 0; --i) |
| if (adapter->port[i].dev) |
| free_netdev(adapter->port[i].dev); |
| } |
| pci_release_regions(pdev); |
| out_disable_pdev: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| static void bit_bang(struct adapter *adapter, int bitdata, int nbits) |
| { |
| int data; |
| int i; |
| u32 val; |
| |
| enum { |
| S_CLOCK = 1 << 3, |
| S_DATA = 1 << 4 |
| }; |
| |
| for (i = (nbits - 1); i > -1; i--) { |
| |
| udelay(50); |
| |
| data = ((bitdata >> i) & 0x1); |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| |
| if (data) |
| val |= S_DATA; |
| else |
| val &= ~S_DATA; |
| |
| udelay(50); |
| |
| /* Set SCLOCK low */ |
| val &= ~S_CLOCK; |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| |
| udelay(50); |
| |
| /* Write SCLOCK high */ |
| val |= S_CLOCK; |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| |
| } |
| } |
| |
| static int t1_clock(struct adapter *adapter, int mode) |
| { |
| u32 val; |
| int M_CORE_VAL; |
| int M_MEM_VAL; |
| |
| enum { |
| M_CORE_BITS = 9, |
| T_CORE_VAL = 0, |
| T_CORE_BITS = 2, |
| N_CORE_VAL = 0, |
| N_CORE_BITS = 2, |
| M_MEM_BITS = 9, |
| T_MEM_VAL = 0, |
| T_MEM_BITS = 2, |
| N_MEM_VAL = 0, |
| N_MEM_BITS = 2, |
| NP_LOAD = 1 << 17, |
| S_LOAD_MEM = 1 << 5, |
| S_LOAD_CORE = 1 << 6, |
| S_CLOCK = 1 << 3 |
| }; |
| |
| if (!t1_is_T1B(adapter)) |
| return -ENODEV; /* Can't re-clock this chip. */ |
| |
| if (mode & 2) |
| return 0; /* show current mode. */ |
| |
| if ((adapter->t1powersave & 1) == (mode & 1)) |
| return -EALREADY; /* ASIC already running in mode. */ |
| |
| if ((mode & 1) == HCLOCK) { |
| M_CORE_VAL = 0x14; |
| M_MEM_VAL = 0x18; |
| adapter->t1powersave = HCLOCK; /* overclock */ |
| } else { |
| M_CORE_VAL = 0xe; |
| M_MEM_VAL = 0x10; |
| adapter->t1powersave = LCLOCK; /* underclock */ |
| } |
| |
| /* Don't interrupt this serial stream! */ |
| spin_lock(&adapter->tpi_lock); |
| |
| /* Initialize for ASIC core */ |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val |= NP_LOAD; |
| udelay(50); |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| udelay(50); |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val &= ~S_LOAD_CORE; |
| val &= ~S_CLOCK; |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| udelay(50); |
| |
| /* Serial program the ASIC clock synthesizer */ |
| bit_bang(adapter, T_CORE_VAL, T_CORE_BITS); |
| bit_bang(adapter, N_CORE_VAL, N_CORE_BITS); |
| bit_bang(adapter, M_CORE_VAL, M_CORE_BITS); |
| udelay(50); |
| |
| /* Finish ASIC core */ |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val |= S_LOAD_CORE; |
| udelay(50); |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| udelay(50); |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val &= ~S_LOAD_CORE; |
| udelay(50); |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| udelay(50); |
| |
| /* Initialize for memory */ |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val |= NP_LOAD; |
| udelay(50); |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| udelay(50); |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val &= ~S_LOAD_MEM; |
| val &= ~S_CLOCK; |
| udelay(50); |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| udelay(50); |
| |
| /* Serial program the memory clock synthesizer */ |
| bit_bang(adapter, T_MEM_VAL, T_MEM_BITS); |
| bit_bang(adapter, N_MEM_VAL, N_MEM_BITS); |
| bit_bang(adapter, M_MEM_VAL, M_MEM_BITS); |
| udelay(50); |
| |
| /* Finish memory */ |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val |= S_LOAD_MEM; |
| udelay(50); |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| udelay(50); |
| __t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val &= ~S_LOAD_MEM; |
| udelay(50); |
| __t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| |
| spin_unlock(&adapter->tpi_lock); |
| |
| return 0; |
| } |
| |
| static inline void t1_sw_reset(struct pci_dev *pdev) |
| { |
| pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3); |
| pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 0); |
| } |
| |
| static void remove_one(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct adapter *adapter = dev->ml_priv; |
| int i; |
| |
| for_each_port(adapter, i) { |
| if (test_bit(i, &adapter->registered_device_map)) |
| unregister_netdev(adapter->port[i].dev); |
| } |
| |
| t1_free_sw_modules(adapter); |
| iounmap(adapter->regs); |
| |
| while (--i >= 0) { |
| if (adapter->port[i].dev) |
| free_netdev(adapter->port[i].dev); |
| } |
| |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| t1_sw_reset(pdev); |
| } |
| |
| static struct pci_driver cxgb_pci_driver = { |
| .name = DRV_NAME, |
| .id_table = t1_pci_tbl, |
| .probe = init_one, |
| .remove = remove_one, |
| }; |
| |
| module_pci_driver(cxgb_pci_driver); |