| /* |
| * PowerPC version |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * |
| * Derived from "arch/m68k/kernel/ptrace.c" |
| * Copyright (C) 1994 by Hamish Macdonald |
| * Taken from linux/kernel/ptrace.c and modified for M680x0. |
| * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds |
| * |
| * Modified by Cort Dougan (cort@hq.fsmlabs.com) |
| * and Paul Mackerras (paulus@samba.org). |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file README.legal in the main directory of |
| * this archive for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/errno.h> |
| #include <linux/ptrace.h> |
| #include <linux/user.h> |
| #include <linux/security.h> |
| #include <linux/signal.h> |
| #include <linux/seccomp.h> |
| #include <linux/audit.h> |
| #ifdef CONFIG_PPC32 |
| #include <linux/module.h> |
| #endif |
| |
| #include <asm/uaccess.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/system.h> |
| |
| /* |
| * does not yet catch signals sent when the child dies. |
| * in exit.c or in signal.c. |
| */ |
| |
| /* |
| * Set of msr bits that gdb can change on behalf of a process. |
| */ |
| #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) |
| #define MSR_DEBUGCHANGE 0 |
| #else |
| #define MSR_DEBUGCHANGE (MSR_SE | MSR_BE) |
| #endif |
| |
| /* |
| * Max register writeable via put_reg |
| */ |
| #ifdef CONFIG_PPC32 |
| #define PT_MAX_PUT_REG PT_MQ |
| #else |
| #define PT_MAX_PUT_REG PT_CCR |
| #endif |
| |
| /* |
| * Get contents of register REGNO in task TASK. |
| */ |
| unsigned long ptrace_get_reg(struct task_struct *task, int regno) |
| { |
| unsigned long tmp = 0; |
| |
| if (task->thread.regs == NULL) |
| return -EIO; |
| |
| if (regno == PT_MSR) { |
| tmp = ((unsigned long *)task->thread.regs)[PT_MSR]; |
| return tmp | task->thread.fpexc_mode; |
| } |
| |
| if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long))) |
| return ((unsigned long *)task->thread.regs)[regno]; |
| |
| return -EIO; |
| } |
| |
| /* |
| * Write contents of register REGNO in task TASK. |
| */ |
| int ptrace_put_reg(struct task_struct *task, int regno, unsigned long data) |
| { |
| if (task->thread.regs == NULL) |
| return -EIO; |
| |
| if (regno <= PT_MAX_PUT_REG || regno == PT_TRAP) { |
| if (regno == PT_MSR) |
| data = (data & MSR_DEBUGCHANGE) |
| | (task->thread.regs->msr & ~MSR_DEBUGCHANGE); |
| /* We prevent mucking around with the reserved area of trap |
| * which are used internally by the kernel |
| */ |
| if (regno == PT_TRAP) |
| data &= 0xfff0; |
| ((unsigned long *)task->thread.regs)[regno] = data; |
| return 0; |
| } |
| return -EIO; |
| } |
| |
| |
| static int get_fpregs(void __user *data, struct task_struct *task, |
| int has_fpscr) |
| { |
| unsigned int count = has_fpscr ? 33 : 32; |
| |
| if (copy_to_user(data, task->thread.fpr, count * sizeof(double))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int set_fpregs(void __user *data, struct task_struct *task, |
| int has_fpscr) |
| { |
| unsigned int count = has_fpscr ? 33 : 32; |
| |
| if (copy_from_user(task->thread.fpr, data, count * sizeof(double))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| |
| #ifdef CONFIG_ALTIVEC |
| /* |
| * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. |
| * The transfer totals 34 quadword. Quadwords 0-31 contain the |
| * corresponding vector registers. Quadword 32 contains the vscr as the |
| * last word (offset 12) within that quadword. Quadword 33 contains the |
| * vrsave as the first word (offset 0) within the quadword. |
| * |
| * This definition of the VMX state is compatible with the current PPC32 |
| * ptrace interface. This allows signal handling and ptrace to use the |
| * same structures. This also simplifies the implementation of a bi-arch |
| * (combined (32- and 64-bit) gdb. |
| */ |
| |
| /* |
| * Get contents of AltiVec register state in task TASK |
| */ |
| static int get_vrregs(unsigned long __user *data, struct task_struct *task) |
| { |
| unsigned long regsize; |
| |
| /* copy AltiVec registers VR[0] .. VR[31] */ |
| regsize = 32 * sizeof(vector128); |
| if (copy_to_user(data, task->thread.vr, regsize)) |
| return -EFAULT; |
| data += (regsize / sizeof(unsigned long)); |
| |
| /* copy VSCR */ |
| regsize = 1 * sizeof(vector128); |
| if (copy_to_user(data, &task->thread.vscr, regsize)) |
| return -EFAULT; |
| data += (regsize / sizeof(unsigned long)); |
| |
| /* copy VRSAVE */ |
| if (put_user(task->thread.vrsave, (u32 __user *)data)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| /* |
| * Write contents of AltiVec register state into task TASK. |
| */ |
| static int set_vrregs(struct task_struct *task, unsigned long __user *data) |
| { |
| unsigned long regsize; |
| |
| /* copy AltiVec registers VR[0] .. VR[31] */ |
| regsize = 32 * sizeof(vector128); |
| if (copy_from_user(task->thread.vr, data, regsize)) |
| return -EFAULT; |
| data += (regsize / sizeof(unsigned long)); |
| |
| /* copy VSCR */ |
| regsize = 1 * sizeof(vector128); |
| if (copy_from_user(&task->thread.vscr, data, regsize)) |
| return -EFAULT; |
| data += (regsize / sizeof(unsigned long)); |
| |
| /* copy VRSAVE */ |
| if (get_user(task->thread.vrsave, (u32 __user *)data)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| #endif /* CONFIG_ALTIVEC */ |
| |
| #ifdef CONFIG_SPE |
| |
| /* |
| * For get_evrregs/set_evrregs functions 'data' has the following layout: |
| * |
| * struct { |
| * u32 evr[32]; |
| * u64 acc; |
| * u32 spefscr; |
| * } |
| */ |
| |
| /* |
| * Get contents of SPE register state in task TASK. |
| */ |
| static int get_evrregs(unsigned long *data, struct task_struct *task) |
| { |
| int i; |
| |
| if (!access_ok(VERIFY_WRITE, data, 35 * sizeof(unsigned long))) |
| return -EFAULT; |
| |
| /* copy SPEFSCR */ |
| if (__put_user(task->thread.spefscr, &data[34])) |
| return -EFAULT; |
| |
| /* copy SPE registers EVR[0] .. EVR[31] */ |
| for (i = 0; i < 32; i++, data++) |
| if (__put_user(task->thread.evr[i], data)) |
| return -EFAULT; |
| |
| /* copy ACC */ |
| if (__put_user64(task->thread.acc, (unsigned long long *)data)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| /* |
| * Write contents of SPE register state into task TASK. |
| */ |
| static int set_evrregs(struct task_struct *task, unsigned long *data) |
| { |
| int i; |
| |
| if (!access_ok(VERIFY_READ, data, 35 * sizeof(unsigned long))) |
| return -EFAULT; |
| |
| /* copy SPEFSCR */ |
| if (__get_user(task->thread.spefscr, &data[34])) |
| return -EFAULT; |
| |
| /* copy SPE registers EVR[0] .. EVR[31] */ |
| for (i = 0; i < 32; i++, data++) |
| if (__get_user(task->thread.evr[i], data)) |
| return -EFAULT; |
| /* copy ACC */ |
| if (__get_user64(task->thread.acc, (unsigned long long*)data)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| #endif /* CONFIG_SPE */ |
| |
| |
| void user_enable_single_step(struct task_struct *task) |
| { |
| struct pt_regs *regs = task->thread.regs; |
| |
| if (regs != NULL) { |
| #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) |
| task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC; |
| regs->msr |= MSR_DE; |
| #else |
| regs->msr |= MSR_SE; |
| #endif |
| } |
| set_tsk_thread_flag(task, TIF_SINGLESTEP); |
| } |
| |
| void user_disable_single_step(struct task_struct *task) |
| { |
| struct pt_regs *regs = task->thread.regs; |
| |
| if (regs != NULL) { |
| #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) |
| task->thread.dbcr0 = 0; |
| regs->msr &= ~MSR_DE; |
| #else |
| regs->msr &= ~MSR_SE; |
| #endif |
| } |
| clear_tsk_thread_flag(task, TIF_SINGLESTEP); |
| } |
| |
| static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, |
| unsigned long data) |
| { |
| /* We only support one DABR and no IABRS at the moment */ |
| if (addr > 0) |
| return -EINVAL; |
| |
| /* The bottom 3 bits are flags */ |
| if ((data & ~0x7UL) >= TASK_SIZE) |
| return -EIO; |
| |
| /* Ensure translation is on */ |
| if (data && !(data & DABR_TRANSLATION)) |
| return -EIO; |
| |
| task->thread.dabr = data; |
| return 0; |
| } |
| |
| /* |
| * Called by kernel/ptrace.c when detaching.. |
| * |
| * Make sure single step bits etc are not set. |
| */ |
| void ptrace_disable(struct task_struct *child) |
| { |
| /* make sure the single step bit is not set. */ |
| user_disable_single_step(child); |
| } |
| |
| /* |
| * Here are the old "legacy" powerpc specific getregs/setregs ptrace calls, |
| * we mark them as obsolete now, they will be removed in a future version |
| */ |
| static long arch_ptrace_old(struct task_struct *child, long request, long addr, |
| long data) |
| { |
| int ret = -EPERM; |
| |
| switch(request) { |
| case PPC_PTRACE_GETREGS: { /* Get GPRs 0 - 31. */ |
| int i; |
| unsigned long *reg = &((unsigned long *)child->thread.regs)[0]; |
| unsigned long __user *tmp = (unsigned long __user *)addr; |
| |
| CHECK_FULL_REGS(child->thread.regs); |
| for (i = 0; i < 32; i++) { |
| ret = put_user(*reg, tmp); |
| if (ret) |
| break; |
| reg++; |
| tmp++; |
| } |
| break; |
| } |
| |
| case PPC_PTRACE_SETREGS: { /* Set GPRs 0 - 31. */ |
| int i; |
| unsigned long *reg = &((unsigned long *)child->thread.regs)[0]; |
| unsigned long __user *tmp = (unsigned long __user *)addr; |
| |
| CHECK_FULL_REGS(child->thread.regs); |
| for (i = 0; i < 32; i++) { |
| ret = get_user(*reg, tmp); |
| if (ret) |
| break; |
| reg++; |
| tmp++; |
| } |
| break; |
| } |
| |
| case PPC_PTRACE_GETFPREGS: { /* Get FPRs 0 - 31. */ |
| flush_fp_to_thread(child); |
| ret = get_fpregs((void __user *)addr, child, 0); |
| break; |
| } |
| |
| case PPC_PTRACE_SETFPREGS: { /* Get FPRs 0 - 31. */ |
| flush_fp_to_thread(child); |
| ret = set_fpregs((void __user *)addr, child, 0); |
| break; |
| } |
| |
| } |
| return ret; |
| } |
| |
| long arch_ptrace(struct task_struct *child, long request, long addr, long data) |
| { |
| int ret = -EPERM; |
| |
| switch (request) { |
| /* when I and D space are separate, these will need to be fixed. */ |
| case PTRACE_PEEKTEXT: /* read word at location addr. */ |
| case PTRACE_PEEKDATA: |
| ret = generic_ptrace_peekdata(child, addr, data); |
| break; |
| |
| /* read the word at location addr in the USER area. */ |
| case PTRACE_PEEKUSR: { |
| unsigned long index, tmp; |
| |
| ret = -EIO; |
| /* convert to index and check */ |
| #ifdef CONFIG_PPC32 |
| index = (unsigned long) addr >> 2; |
| if ((addr & 3) || (index > PT_FPSCR) |
| || (child->thread.regs == NULL)) |
| #else |
| index = (unsigned long) addr >> 3; |
| if ((addr & 7) || (index > PT_FPSCR)) |
| #endif |
| break; |
| |
| CHECK_FULL_REGS(child->thread.regs); |
| if (index < PT_FPR0) { |
| tmp = ptrace_get_reg(child, (int) index); |
| } else { |
| flush_fp_to_thread(child); |
| tmp = ((unsigned long *)child->thread.fpr)[index - PT_FPR0]; |
| } |
| ret = put_user(tmp,(unsigned long __user *) data); |
| break; |
| } |
| |
| /* If I and D space are separate, this will have to be fixed. */ |
| case PTRACE_POKETEXT: /* write the word at location addr. */ |
| case PTRACE_POKEDATA: |
| ret = generic_ptrace_pokedata(child, addr, data); |
| break; |
| |
| /* write the word at location addr in the USER area */ |
| case PTRACE_POKEUSR: { |
| unsigned long index; |
| |
| ret = -EIO; |
| /* convert to index and check */ |
| #ifdef CONFIG_PPC32 |
| index = (unsigned long) addr >> 2; |
| if ((addr & 3) || (index > PT_FPSCR) |
| || (child->thread.regs == NULL)) |
| #else |
| index = (unsigned long) addr >> 3; |
| if ((addr & 7) || (index > PT_FPSCR)) |
| #endif |
| break; |
| |
| CHECK_FULL_REGS(child->thread.regs); |
| if (index < PT_FPR0) { |
| ret = ptrace_put_reg(child, index, data); |
| } else { |
| flush_fp_to_thread(child); |
| ((unsigned long *)child->thread.fpr)[index - PT_FPR0] = data; |
| ret = 0; |
| } |
| break; |
| } |
| |
| case PTRACE_GET_DEBUGREG: { |
| ret = -EINVAL; |
| /* We only support one DABR and no IABRS at the moment */ |
| if (addr > 0) |
| break; |
| ret = put_user(child->thread.dabr, |
| (unsigned long __user *)data); |
| break; |
| } |
| |
| case PTRACE_SET_DEBUGREG: |
| ret = ptrace_set_debugreg(child, addr, data); |
| break; |
| |
| #ifdef CONFIG_PPC64 |
| case PTRACE_GETREGS64: |
| #endif |
| case PTRACE_GETREGS: { /* Get all pt_regs from the child. */ |
| int ui; |
| if (!access_ok(VERIFY_WRITE, (void __user *)data, |
| sizeof(struct pt_regs))) { |
| ret = -EIO; |
| break; |
| } |
| CHECK_FULL_REGS(child->thread.regs); |
| ret = 0; |
| for (ui = 0; ui < PT_REGS_COUNT; ui ++) { |
| ret |= __put_user(ptrace_get_reg(child, ui), |
| (unsigned long __user *) data); |
| data += sizeof(long); |
| } |
| break; |
| } |
| |
| #ifdef CONFIG_PPC64 |
| case PTRACE_SETREGS64: |
| #endif |
| case PTRACE_SETREGS: { /* Set all gp regs in the child. */ |
| unsigned long tmp; |
| int ui; |
| if (!access_ok(VERIFY_READ, (void __user *)data, |
| sizeof(struct pt_regs))) { |
| ret = -EIO; |
| break; |
| } |
| CHECK_FULL_REGS(child->thread.regs); |
| ret = 0; |
| for (ui = 0; ui < PT_REGS_COUNT; ui ++) { |
| ret = __get_user(tmp, (unsigned long __user *) data); |
| if (ret) |
| break; |
| ptrace_put_reg(child, ui, tmp); |
| data += sizeof(long); |
| } |
| break; |
| } |
| |
| case PTRACE_GETFPREGS: { /* Get the child FPU state (FPR0...31 + FPSCR) */ |
| flush_fp_to_thread(child); |
| ret = get_fpregs((void __user *)data, child, 1); |
| break; |
| } |
| |
| case PTRACE_SETFPREGS: { /* Set the child FPU state (FPR0...31 + FPSCR) */ |
| flush_fp_to_thread(child); |
| ret = set_fpregs((void __user *)data, child, 1); |
| break; |
| } |
| |
| #ifdef CONFIG_ALTIVEC |
| case PTRACE_GETVRREGS: |
| /* Get the child altivec register state. */ |
| flush_altivec_to_thread(child); |
| ret = get_vrregs((unsigned long __user *)data, child); |
| break; |
| |
| case PTRACE_SETVRREGS: |
| /* Set the child altivec register state. */ |
| flush_altivec_to_thread(child); |
| ret = set_vrregs(child, (unsigned long __user *)data); |
| break; |
| #endif |
| #ifdef CONFIG_SPE |
| case PTRACE_GETEVRREGS: |
| /* Get the child spe register state. */ |
| flush_spe_to_thread(child); |
| ret = get_evrregs((unsigned long __user *)data, child); |
| break; |
| |
| case PTRACE_SETEVRREGS: |
| /* Set the child spe register state. */ |
| /* this is to clear the MSR_SPE bit to force a reload |
| * of register state from memory */ |
| flush_spe_to_thread(child); |
| ret = set_evrregs(child, (unsigned long __user *)data); |
| break; |
| #endif |
| |
| /* Old reverse args ptrace callss */ |
| case PPC_PTRACE_GETREGS: /* Get GPRs 0 - 31. */ |
| case PPC_PTRACE_SETREGS: /* Set GPRs 0 - 31. */ |
| case PPC_PTRACE_GETFPREGS: /* Get FPRs 0 - 31. */ |
| case PPC_PTRACE_SETFPREGS: /* Get FPRs 0 - 31. */ |
| ret = arch_ptrace_old(child, request, addr, data); |
| break; |
| |
| default: |
| ret = ptrace_request(child, request, addr, data); |
| break; |
| } |
| return ret; |
| } |
| |
| static void do_syscall_trace(void) |
| { |
| /* the 0x80 provides a way for the tracing parent to distinguish |
| between a syscall stop and SIGTRAP delivery */ |
| ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) |
| ? 0x80 : 0)); |
| |
| /* |
| * this isn't the same as continuing with a signal, but it will do |
| * for normal use. strace only continues with a signal if the |
| * stopping signal is not SIGTRAP. -brl |
| */ |
| if (current->exit_code) { |
| send_sig(current->exit_code, current, 1); |
| current->exit_code = 0; |
| } |
| } |
| |
| void do_syscall_trace_enter(struct pt_regs *regs) |
| { |
| secure_computing(regs->gpr[0]); |
| |
| if (test_thread_flag(TIF_SYSCALL_TRACE) |
| && (current->ptrace & PT_PTRACED)) |
| do_syscall_trace(); |
| |
| if (unlikely(current->audit_context)) { |
| #ifdef CONFIG_PPC64 |
| if (!test_thread_flag(TIF_32BIT)) |
| audit_syscall_entry(AUDIT_ARCH_PPC64, |
| regs->gpr[0], |
| regs->gpr[3], regs->gpr[4], |
| regs->gpr[5], regs->gpr[6]); |
| else |
| #endif |
| audit_syscall_entry(AUDIT_ARCH_PPC, |
| regs->gpr[0], |
| regs->gpr[3] & 0xffffffff, |
| regs->gpr[4] & 0xffffffff, |
| regs->gpr[5] & 0xffffffff, |
| regs->gpr[6] & 0xffffffff); |
| } |
| } |
| |
| void do_syscall_trace_leave(struct pt_regs *regs) |
| { |
| if (unlikely(current->audit_context)) |
| audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, |
| regs->result); |
| |
| if ((test_thread_flag(TIF_SYSCALL_TRACE) |
| || test_thread_flag(TIF_SINGLESTEP)) |
| && (current->ptrace & PT_PTRACED)) |
| do_syscall_trace(); |
| } |