| /* |
| * USB PhidgetInterfaceKit driver 1.0 |
| * |
| * Copyright (C) 2004 Sean Young <sean@mess.org> |
| * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This is a driver for the USB PhidgetInterfaceKit. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| |
| #define DRIVER_AUTHOR "Sean Young <sean@mess.org>" |
| #define DRIVER_DESC "USB PhidgetInterfaceKit Driver" |
| |
| #define USB_VENDOR_ID_GLAB 0x06c2 |
| #define USB_DEVICE_ID_INTERFACEKIT004 0x0040 |
| #define USB_DEVICE_ID_INTERFACEKIT888 0x0045 |
| #define USB_DEVICE_ID_INTERFACEKIT047 0x0051 |
| #define USB_DEVICE_ID_INTERFACEKIT088 0x0053 |
| |
| #define USB_VENDOR_ID_WISEGROUP 0x0925 |
| #define USB_DEVICE_ID_INTERFACEKIT884 0x8201 |
| |
| #define MAX_INTERFACES 8 |
| |
| struct driver_interfacekit { |
| int sensors; |
| int inputs; |
| int outputs; |
| int has_lcd; |
| }; |
| #define ifkit(_sensors, _inputs, _outputs, _lcd) \ |
| static struct driver_interfacekit ph_##_sensors##_inputs##_outputs = { \ |
| .sensors = _sensors, \ |
| .inputs = _inputs, \ |
| .outputs = _outputs, \ |
| .has_lcd = _lcd, \ |
| }; |
| ifkit(0, 0, 4, 0); |
| ifkit(8, 8, 8, 0); |
| ifkit(0, 4, 7, 1); |
| ifkit(8, 8, 4, 0); |
| ifkit(0, 8, 8, 1); |
| |
| struct phidget_interfacekit { |
| struct usb_device *udev; |
| struct usb_interface *intf; |
| struct driver_interfacekit *ifkit; |
| int outputs[MAX_INTERFACES]; |
| int inputs[MAX_INTERFACES]; |
| int sensors[MAX_INTERFACES]; |
| u8 lcd_files_on; |
| |
| struct urb *irq; |
| unsigned char *data; |
| dma_addr_t data_dma; |
| }; |
| |
| static struct usb_device_id id_table[] = { |
| {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT004), |
| .driver_info = (kernel_ulong_t)&ph_004}, |
| {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888), |
| .driver_info = (kernel_ulong_t)&ph_888}, |
| {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT047), |
| .driver_info = (kernel_ulong_t)&ph_047}, |
| {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT088), |
| .driver_info = (kernel_ulong_t)&ph_088}, |
| {USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_INTERFACEKIT884), |
| .driver_info = (kernel_ulong_t)&ph_884}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| static int change_outputs(struct phidget_interfacekit *kit, int output_num, int enable) |
| { |
| unsigned char *buffer; |
| int retval; |
| int n; |
| |
| buffer = kzalloc(4, GFP_KERNEL); |
| if (!buffer) { |
| dev_err(&kit->udev->dev, "%s - out of memory\n", |
| __FUNCTION__); |
| return -ENOMEM; |
| } |
| |
| kit->outputs[output_num] = enable; |
| for (n=0; n<8; n++) { |
| if (kit->outputs[n]) { |
| buffer[0] |= 1 << n; |
| } |
| } |
| |
| dev_dbg(&kit->udev->dev, "sending data: %02x\n", buffer[0]); |
| |
| retval = usb_control_msg(kit->udev, |
| usb_sndctrlpipe(kit->udev, 0), |
| 0x09, 0x21, 0x0200, 0x0000, buffer, 4, 2000); |
| |
| if (retval != 4) |
| dev_err(&kit->udev->dev, "usb_control_msg returned %d\n", |
| retval); |
| kfree(buffer); |
| |
| return retval < 0 ? retval : 0; |
| } |
| |
| static int change_string(struct phidget_interfacekit *kit, const char *display, unsigned char row) |
| { |
| unsigned char *buffer; |
| unsigned char *form_buffer; |
| int retval = -ENOMEM; |
| int i,j, len, buf_ptr; |
| |
| buffer = kmalloc(8, GFP_KERNEL); |
| form_buffer = kmalloc(30, GFP_KERNEL); |
| if ((!buffer) || (!form_buffer)) { |
| dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); |
| goto exit; |
| } |
| |
| len = strlen(display); |
| if (len > 20) |
| len = 20; |
| |
| dev_dbg(&kit->udev->dev, "Setting LCD line %d to %s\n", row, display); |
| |
| form_buffer[0] = row * 0x40 + 0x80; |
| form_buffer[1] = 0x02; |
| buf_ptr = 2; |
| for (i = 0; i<len; i++) |
| form_buffer[buf_ptr++] = display[i]; |
| |
| for (i = 0; i < (20 - len); i++) |
| form_buffer[buf_ptr++] = 0x20; |
| form_buffer[buf_ptr++] = 0x01; |
| form_buffer[buf_ptr++] = row * 0x40 + 0x80 + strlen(display); |
| |
| for (i = 0; i < buf_ptr; i += 7) { |
| if ((buf_ptr - i) > 7) |
| len = 7; |
| else |
| len = (buf_ptr - i); |
| for (j = 0; j < len; j++) |
| buffer[j] = form_buffer[i + j]; |
| buffer[7] = len; |
| |
| retval = usb_control_msg(kit->udev, |
| usb_sndctrlpipe(kit->udev, 0), |
| 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); |
| if (retval < 0) |
| goto exit; |
| } |
| |
| retval = 0; |
| exit: |
| kfree(buffer); |
| kfree(form_buffer); |
| |
| return retval; |
| } |
| |
| #define set_lcd_line(number) \ |
| static ssize_t lcd_line_##number(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ |
| { \ |
| struct usb_interface *intf = to_usb_interface(dev); \ |
| struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| change_string(kit, buf, number - 1); \ |
| return count; \ |
| } \ |
| static DEVICE_ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number); |
| set_lcd_line(1); |
| set_lcd_line(2); |
| |
| static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct phidget_interfacekit *kit = usb_get_intfdata(intf); |
| int enabled; |
| unsigned char *buffer; |
| int retval = -ENOMEM; |
| |
| buffer = kzalloc(8, GFP_KERNEL); |
| if (!buffer) { |
| dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); |
| goto exit; |
| } |
| |
| if (sscanf(buf, "%d", &enabled) < 1) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| if (enabled) |
| buffer[0] = 0x01; |
| buffer[7] = 0x11; |
| |
| dev_dbg(&kit->udev->dev, "Setting backlight to %s\n", enabled ? "on" : "off"); |
| |
| retval = usb_control_msg(kit->udev, |
| usb_sndctrlpipe(kit->udev, 0), |
| 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); |
| if (retval < 0) |
| goto exit; |
| |
| retval = count; |
| exit: |
| kfree(buffer); |
| return retval; |
| } |
| static DEVICE_ATTR(backlight, S_IWUGO, NULL, set_backlight); |
| |
| static void remove_lcd_files(struct phidget_interfacekit *kit) |
| { |
| if (kit->lcd_files_on) { |
| dev_dbg(&kit->udev->dev, "Removing lcd files\n"); |
| device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_1); |
| device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_2); |
| device_remove_file(&kit->intf->dev, &dev_attr_backlight); |
| } |
| } |
| |
| static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct phidget_interfacekit *kit = usb_get_intfdata(intf); |
| int enable; |
| |
| if (kit->ifkit->has_lcd == 0) |
| return -ENODEV; |
| |
| if (sscanf(buf, "%d", &enable) < 1) |
| return -EINVAL; |
| |
| if (enable) { |
| if (!kit->lcd_files_on) { |
| dev_dbg(&kit->udev->dev, "Adding lcd files\n"); |
| device_create_file(&kit->intf->dev, &dev_attr_lcd_line_1); |
| device_create_file(&kit->intf->dev, &dev_attr_lcd_line_2); |
| device_create_file(&kit->intf->dev, &dev_attr_backlight); |
| kit->lcd_files_on = 1; |
| } |
| } else { |
| if (kit->lcd_files_on) { |
| remove_lcd_files(kit); |
| kit->lcd_files_on = 0; |
| } |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR(lcd, S_IWUGO, NULL, enable_lcd_files); |
| |
| static void interfacekit_irq(struct urb *urb, struct pt_regs *regs) |
| { |
| struct phidget_interfacekit *kit = urb->context; |
| unsigned char *buffer = kit->data; |
| int status; |
| int n; |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| break; |
| case -ECONNRESET: /* unlink */ |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| /* -EPIPE: should clear the halt */ |
| default: /* error */ |
| goto resubmit; |
| } |
| |
| for (n=0; n<8; n++) { |
| kit->inputs[n] = buffer[1] & (1 << n) ? 1 : 0; |
| } |
| |
| if (buffer[0] & 1) { |
| kit->sensors[4] = buffer[2] + (buffer[3] & 0x0f) * 256; |
| kit->sensors[5] = buffer[4] + (buffer[3] & 0xf0) * 16; |
| kit->sensors[6] = buffer[5] + (buffer[6] & 0x0f) * 256; |
| kit->sensors[7] = buffer[7] + (buffer[6] & 0xf0) * 16; |
| } else { |
| kit->sensors[0] = buffer[2] + (buffer[3] & 0x0f) * 256; |
| kit->sensors[1] = buffer[4] + (buffer[3] & 0xf0) * 16; |
| kit->sensors[2] = buffer[5] + (buffer[6] & 0x0f) * 256; |
| kit->sensors[3] = buffer[7] + (buffer[6] & 0xf0) * 16; |
| } |
| |
| resubmit: |
| status = usb_submit_urb(urb, SLAB_ATOMIC); |
| if (status) |
| err("can't resubmit intr, %s-%s/interfacekit0, status %d", |
| kit->udev->bus->bus_name, |
| kit->udev->devpath, status); |
| } |
| |
| #define show_set_output(value) \ |
| static ssize_t set_output##value(struct device *dev, struct device_attribute *attr, const char *buf, \ |
| size_t count) \ |
| { \ |
| struct usb_interface *intf = to_usb_interface(dev); \ |
| struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| int enabled; \ |
| int retval; \ |
| \ |
| if (sscanf(buf, "%d", &enabled) < 1) { \ |
| return -EINVAL; \ |
| } \ |
| \ |
| retval = change_outputs(kit, value - 1, enabled ? 1 : 0); \ |
| \ |
| return retval ? retval : count; \ |
| } \ |
| \ |
| static ssize_t show_output##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| struct usb_interface *intf = to_usb_interface(dev); \ |
| struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| \ |
| return sprintf(buf, "%d\n", kit->outputs[value - 1]); \ |
| } \ |
| static DEVICE_ATTR(output##value, S_IWUGO | S_IRUGO, \ |
| show_output##value, set_output##value); |
| show_set_output(1); |
| show_set_output(2); |
| show_set_output(3); |
| show_set_output(4); |
| show_set_output(5); |
| show_set_output(6); |
| show_set_output(7); |
| show_set_output(8); /* should be MAX_INTERFACES - 1 */ |
| |
| #define show_input(value) \ |
| static ssize_t show_input##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| struct usb_interface *intf = to_usb_interface(dev); \ |
| struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| \ |
| return sprintf(buf, "%d\n", kit->inputs[value - 1]); \ |
| } \ |
| static DEVICE_ATTR(input##value, S_IRUGO, show_input##value, NULL); |
| |
| show_input(1); |
| show_input(2); |
| show_input(3); |
| show_input(4); |
| show_input(5); |
| show_input(6); |
| show_input(7); |
| show_input(8); /* should be MAX_INTERFACES - 1 */ |
| |
| #define show_sensor(value) \ |
| static ssize_t show_sensor##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| struct usb_interface *intf = to_usb_interface(dev); \ |
| struct phidget_interfacekit *kit = usb_get_intfdata(intf); \ |
| \ |
| return sprintf(buf, "%d\n", kit->sensors[value - 1]); \ |
| } \ |
| static DEVICE_ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL); |
| |
| show_sensor(1); |
| show_sensor(2); |
| show_sensor(3); |
| show_sensor(4); |
| show_sensor(5); |
| show_sensor(6); |
| show_sensor(7); |
| show_sensor(8); /* should be MAX_INTERFACES - 1 */ |
| |
| static int interfacekit_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| struct usb_device *dev = interface_to_usbdev(intf); |
| struct usb_host_interface *interface; |
| struct usb_endpoint_descriptor *endpoint; |
| struct phidget_interfacekit *kit; |
| struct driver_interfacekit *ifkit; |
| int pipe, maxp; |
| |
| ifkit = (struct driver_interfacekit *)id->driver_info; |
| if (!ifkit) |
| return -ENODEV; |
| |
| interface = intf->cur_altsetting; |
| if (interface->desc.bNumEndpoints != 1) |
| return -ENODEV; |
| |
| endpoint = &interface->endpoint[0].desc; |
| if (!(endpoint->bEndpointAddress & 0x80)) |
| return -ENODEV; |
| /* |
| * bmAttributes |
| */ |
| pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); |
| maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); |
| |
| kit = kzalloc(sizeof(*kit), GFP_KERNEL); |
| if (kit == NULL) { |
| dev_err(&intf->dev, "%s - out of memory\n", __FUNCTION__); |
| return -ENOMEM; |
| } |
| kit->ifkit = ifkit; |
| |
| kit->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &kit->data_dma); |
| if (!kit->data) { |
| kfree(kit); |
| return -ENOMEM; |
| } |
| |
| kit->irq = usb_alloc_urb(0, GFP_KERNEL); |
| if (!kit->irq) { |
| usb_buffer_free(dev, 8, kit->data, kit->data_dma); |
| kfree(kit); |
| return -ENOMEM; |
| } |
| |
| kit->udev = usb_get_dev(dev); |
| kit->intf = intf; |
| usb_fill_int_urb(kit->irq, kit->udev, pipe, kit->data, |
| (maxp > 8 ? 8 : maxp), |
| interfacekit_irq, kit, endpoint->bInterval); |
| kit->irq->transfer_dma = kit->data_dma; |
| kit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| |
| usb_set_intfdata(intf, kit); |
| |
| if (usb_submit_urb(kit->irq, GFP_KERNEL)) { |
| return -EIO; |
| } |
| |
| if (ifkit->outputs >= 4) { |
| device_create_file(&intf->dev, &dev_attr_output1); |
| device_create_file(&intf->dev, &dev_attr_output2); |
| device_create_file(&intf->dev, &dev_attr_output3); |
| device_create_file(&intf->dev, &dev_attr_output4); |
| } |
| if (ifkit->outputs == 8) { |
| device_create_file(&intf->dev, &dev_attr_output5); |
| device_create_file(&intf->dev, &dev_attr_output6); |
| device_create_file(&intf->dev, &dev_attr_output7); |
| device_create_file(&intf->dev, &dev_attr_output8); |
| } |
| |
| if (ifkit->inputs >= 4) { |
| device_create_file(&intf->dev, &dev_attr_input1); |
| device_create_file(&intf->dev, &dev_attr_input2); |
| device_create_file(&intf->dev, &dev_attr_input3); |
| device_create_file(&intf->dev, &dev_attr_input4); |
| } |
| if (ifkit->inputs == 8) { |
| device_create_file(&intf->dev, &dev_attr_input5); |
| device_create_file(&intf->dev, &dev_attr_input6); |
| device_create_file(&intf->dev, &dev_attr_input7); |
| device_create_file(&intf->dev, &dev_attr_input8); |
| } |
| |
| if (ifkit->sensors >= 4) { |
| device_create_file(&intf->dev, &dev_attr_sensor1); |
| device_create_file(&intf->dev, &dev_attr_sensor2); |
| device_create_file(&intf->dev, &dev_attr_sensor3); |
| device_create_file(&intf->dev, &dev_attr_sensor4); |
| } |
| if (ifkit->sensors >= 7) { |
| device_create_file(&intf->dev, &dev_attr_sensor5); |
| device_create_file(&intf->dev, &dev_attr_sensor6); |
| device_create_file(&intf->dev, &dev_attr_sensor7); |
| } |
| if (ifkit->sensors == 8) { |
| device_create_file(&intf->dev, &dev_attr_sensor8); |
| } |
| |
| if (ifkit->has_lcd) |
| device_create_file(&intf->dev, &dev_attr_lcd); |
| |
| dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n", |
| ifkit->sensors, ifkit->inputs, ifkit->outputs); |
| |
| return 0; |
| } |
| |
| static void interfacekit_disconnect(struct usb_interface *interface) |
| { |
| struct phidget_interfacekit *kit; |
| |
| kit = usb_get_intfdata(interface); |
| usb_set_intfdata(interface, NULL); |
| if (!kit) |
| return; |
| |
| if (kit->ifkit->outputs >= 4) { |
| device_remove_file(&interface->dev, &dev_attr_output1); |
| device_remove_file(&interface->dev, &dev_attr_output2); |
| device_remove_file(&interface->dev, &dev_attr_output3); |
| device_remove_file(&interface->dev, &dev_attr_output4); |
| } |
| if (kit->ifkit->outputs == 8) { |
| device_remove_file(&interface->dev, &dev_attr_output5); |
| device_remove_file(&interface->dev, &dev_attr_output6); |
| device_remove_file(&interface->dev, &dev_attr_output7); |
| device_remove_file(&interface->dev, &dev_attr_output8); |
| } |
| |
| if (kit->ifkit->inputs >= 4) { |
| device_remove_file(&interface->dev, &dev_attr_input1); |
| device_remove_file(&interface->dev, &dev_attr_input2); |
| device_remove_file(&interface->dev, &dev_attr_input3); |
| device_remove_file(&interface->dev, &dev_attr_input4); |
| } |
| if (kit->ifkit->inputs == 8) { |
| device_remove_file(&interface->dev, &dev_attr_input5); |
| device_remove_file(&interface->dev, &dev_attr_input6); |
| device_remove_file(&interface->dev, &dev_attr_input7); |
| device_remove_file(&interface->dev, &dev_attr_input8); |
| } |
| |
| if (kit->ifkit->sensors >= 4) { |
| device_remove_file(&interface->dev, &dev_attr_sensor1); |
| device_remove_file(&interface->dev, &dev_attr_sensor2); |
| device_remove_file(&interface->dev, &dev_attr_sensor3); |
| device_remove_file(&interface->dev, &dev_attr_sensor4); |
| } |
| if (kit->ifkit->sensors >= 7) { |
| device_remove_file(&interface->dev, &dev_attr_sensor5); |
| device_remove_file(&interface->dev, &dev_attr_sensor6); |
| device_remove_file(&interface->dev, &dev_attr_sensor7); |
| } |
| if (kit->ifkit->sensors == 8) { |
| device_remove_file(&interface->dev, &dev_attr_sensor8); |
| } |
| if (kit->ifkit->has_lcd) |
| device_remove_file(&interface->dev, &dev_attr_lcd); |
| |
| dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n", |
| kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs); |
| |
| usb_kill_urb(kit->irq); |
| usb_free_urb(kit->irq); |
| usb_buffer_free(kit->udev, 8, kit->data, kit->data_dma); |
| |
| usb_put_dev(kit->udev); |
| kfree(kit); |
| } |
| |
| static struct usb_driver interfacekit_driver = { |
| .name = "phidgetkit", |
| .probe = interfacekit_probe, |
| .disconnect = interfacekit_disconnect, |
| .id_table = id_table |
| }; |
| |
| static int __init interfacekit_init(void) |
| { |
| int retval = 0; |
| |
| retval = usb_register(&interfacekit_driver); |
| if (retval) |
| err("usb_register failed. Error number %d", retval); |
| |
| return retval; |
| } |
| |
| static void __exit interfacekit_exit(void) |
| { |
| usb_deregister(&interfacekit_driver); |
| } |
| |
| module_init(interfacekit_init); |
| module_exit(interfacekit_exit); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |