blob: 023ce66ef3ab2f8858b3946f9777484836c8a799 [file] [log] [blame]
/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#define USER_INT_FLAG (1<<1)
#define VSYNC_PIPEB_FLAG (1<<5)
#define VSYNC_PIPEA_FLAG (1<<7)
#define MAX_NOPID ((u32)~0)
/**
* i915_get_pipe - return the the pipe associated with a given plane
* @dev: DRM device
* @plane: plane to look for
*
* The Intel Mesa & 2D drivers call the vblank routines with a plane number
* rather than a pipe number, since they may not always be equal. This routine
* maps the given @plane back to a pipe number.
*/
static int
i915_get_pipe(struct drm_device *dev, int plane)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 dspcntr;
dspcntr = plane ? I915_READ(DSPBCNTR) : I915_READ(DSPACNTR);
return dspcntr & DISPPLANE_SEL_PIPE_MASK ? 1 : 0;
}
/**
* i915_get_plane - return the the plane associated with a given pipe
* @dev: DRM device
* @pipe: pipe to look for
*
* The Intel Mesa & 2D drivers call the vblank routines with a plane number
* rather than a plane number, since they may not always be equal. This routine
* maps the given @pipe back to a plane number.
*/
static int
i915_get_plane(struct drm_device *dev, int pipe)
{
if (i915_get_pipe(dev, 0) == pipe)
return 0;
return 1;
}
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
* @pipe: pipe to check
*
* Reading certain registers when the pipe is disabled can hang the chip.
* Use this routine to make sure the PLL is running and the pipe is active
* before reading such registers if unsure.
*/
static int
i915_pipe_enabled(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF;
if (I915_READ(pipeconf) & PIPEACONF_ENABLE)
return 1;
return 0;
}
/**
* Emit a synchronous flip.
*
* This function must be called with the drawable spinlock held.
*/
static void
i915_dispatch_vsync_flip(struct drm_device *dev, struct drm_drawable_info *drw,
int plane)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
u16 x1, y1, x2, y2;
int pf_planes = 1 << plane;
/* If the window is visible on the other plane, we have to flip on that
* plane as well.
*/
if (plane == 1) {
x1 = sarea_priv->planeA_x;
y1 = sarea_priv->planeA_y;
x2 = x1 + sarea_priv->planeA_w;
y2 = y1 + sarea_priv->planeA_h;
} else {
x1 = sarea_priv->planeB_x;
y1 = sarea_priv->planeB_y;
x2 = x1 + sarea_priv->planeB_w;
y2 = y1 + sarea_priv->planeB_h;
}
if (x2 > 0 && y2 > 0) {
int i, num_rects = drw->num_rects;
struct drm_clip_rect *rect = drw->rects;
for (i = 0; i < num_rects; i++)
if (!(rect[i].x1 >= x2 || rect[i].y1 >= y2 ||
rect[i].x2 <= x1 || rect[i].y2 <= y1)) {
pf_planes = 0x3;
break;
}
}
i915_dispatch_flip(dev, pf_planes, 1);
}
/**
* Emit blits for scheduled buffer swaps.
*
* This function will be called with the HW lock held.
*/
static void i915_vblank_tasklet(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct list_head *list, *tmp, hits, *hit;
int nhits, nrects, slice[2], upper[2], lower[2], i, num_pages;
unsigned counter[2];
struct drm_drawable_info *drw;
drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
u32 cpp = dev_priv->cpp, offsets[3];
u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
XY_SRC_COPY_BLT_WRITE_ALPHA |
XY_SRC_COPY_BLT_WRITE_RGB)
: XY_SRC_COPY_BLT_CMD;
u32 src_pitch = sarea_priv->pitch * cpp;
u32 dst_pitch = sarea_priv->pitch * cpp;
/* COPY rop (0xcc), map cpp to magic color depth constants */
u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
RING_LOCALS;
if (sarea_priv->front_tiled) {
cmd |= XY_SRC_COPY_BLT_DST_TILED;
dst_pitch >>= 2;
}
if (sarea_priv->back_tiled) {
cmd |= XY_SRC_COPY_BLT_SRC_TILED;
src_pitch >>= 2;
}
counter[0] = drm_vblank_count(dev, 0);
counter[1] = drm_vblank_count(dev, 1);
DRM_DEBUG("\n");
INIT_LIST_HEAD(&hits);
nhits = nrects = 0;
/* No irqsave/restore necessary. This tasklet may be run in an
* interrupt context or normal context, but we don't have to worry
* about getting interrupted by something acquiring the lock, because
* we are the interrupt context thing that acquires the lock.
*/
spin_lock(&dev_priv->swaps_lock);
/* Find buffer swaps scheduled for this vertical blank */
list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
drm_i915_vbl_swap_t *vbl_swap =
list_entry(list, drm_i915_vbl_swap_t, head);
int pipe = i915_get_pipe(dev, vbl_swap->plane);
if ((counter[pipe] - vbl_swap->sequence) > (1<<23))
continue;
list_del(list);
dev_priv->swaps_pending--;
drm_vblank_put(dev, pipe);
spin_unlock(&dev_priv->swaps_lock);
spin_lock(&dev->drw_lock);
drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
if (!drw) {
spin_unlock(&dev->drw_lock);
drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
spin_lock(&dev_priv->swaps_lock);
continue;
}
list_for_each(hit, &hits) {
drm_i915_vbl_swap_t *swap_cmp =
list_entry(hit, drm_i915_vbl_swap_t, head);
struct drm_drawable_info *drw_cmp =
drm_get_drawable_info(dev, swap_cmp->drw_id);
if (drw_cmp &&
drw_cmp->rects[0].y1 > drw->rects[0].y1) {
list_add_tail(list, hit);
break;
}
}
spin_unlock(&dev->drw_lock);
/* List of hits was empty, or we reached the end of it */
if (hit == &hits)
list_add_tail(list, hits.prev);
nhits++;
spin_lock(&dev_priv->swaps_lock);
}
spin_unlock(&dev_priv->swaps_lock);
if (nhits == 0)
return;
i915_kernel_lost_context(dev);
upper[0] = upper[1] = 0;
slice[0] = max(sarea_priv->planeA_h / nhits, 1);
slice[1] = max(sarea_priv->planeB_h / nhits, 1);
lower[0] = sarea_priv->planeA_y + slice[0];
lower[1] = sarea_priv->planeB_y + slice[0];
offsets[0] = sarea_priv->front_offset;
offsets[1] = sarea_priv->back_offset;
offsets[2] = sarea_priv->third_offset;
num_pages = sarea_priv->third_handle ? 3 : 2;
spin_lock(&dev->drw_lock);
/* Emit blits for buffer swaps, partitioning both outputs into as many
* slices as there are buffer swaps scheduled in order to avoid tearing
* (based on the assumption that a single buffer swap would always
* complete before scanout starts).
*/
for (i = 0; i++ < nhits;
upper[0] = lower[0], lower[0] += slice[0],
upper[1] = lower[1], lower[1] += slice[1]) {
int init_drawrect = 1;
if (i == nhits)
lower[0] = lower[1] = sarea_priv->height;
list_for_each(hit, &hits) {
drm_i915_vbl_swap_t *swap_hit =
list_entry(hit, drm_i915_vbl_swap_t, head);
struct drm_clip_rect *rect;
int num_rects, plane, front, back;
unsigned short top, bottom;
drw = drm_get_drawable_info(dev, swap_hit->drw_id);
if (!drw)
continue;
plane = swap_hit->plane;
if (swap_hit->flip) {
i915_dispatch_vsync_flip(dev, drw, plane);
continue;
}
if (init_drawrect) {
int width = sarea_priv->width;
int height = sarea_priv->height;
if (IS_I965G(dev)) {
BEGIN_LP_RING(4);
OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
OUT_RING(0);
OUT_RING(((width - 1) & 0xffff) | ((height - 1) << 16));
OUT_RING(0);
ADVANCE_LP_RING();
} else {
BEGIN_LP_RING(6);
OUT_RING(GFX_OP_DRAWRECT_INFO);
OUT_RING(0);
OUT_RING(0);
OUT_RING(((width - 1) & 0xffff) | ((height - 1) << 16));
OUT_RING(0);
OUT_RING(0);
ADVANCE_LP_RING();
}
sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
init_drawrect = 0;
}
rect = drw->rects;
top = upper[plane];
bottom = lower[plane];
front = (dev_priv->sarea_priv->pf_current_page >>
(2 * plane)) & 0x3;
back = (front + 1) % num_pages;
for (num_rects = drw->num_rects; num_rects--; rect++) {
int y1 = max(rect->y1, top);
int y2 = min(rect->y2, bottom);
if (y1 >= y2)
continue;
BEGIN_LP_RING(8);
OUT_RING(cmd);
OUT_RING(ropcpp | dst_pitch);
OUT_RING((y1 << 16) | rect->x1);
OUT_RING((y2 << 16) | rect->x2);
OUT_RING(offsets[front]);
OUT_RING((y1 << 16) | rect->x1);
OUT_RING(src_pitch);
OUT_RING(offsets[back]);
ADVANCE_LP_RING();
}
}
}
spin_unlock(&dev->drw_lock);
list_for_each_safe(hit, tmp, &hits) {
drm_i915_vbl_swap_t *swap_hit =
list_entry(hit, drm_i915_vbl_swap_t, head);
list_del(hit);
drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER);
}
}
u32 i915_get_vblank_counter(struct drm_device *dev, int plane)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long high_frame;
unsigned long low_frame;
u32 high1, high2, low, count;
int pipe;
pipe = i915_get_pipe(dev, plane);
high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH;
low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
if (!i915_pipe_enabled(dev, pipe)) {
printk(KERN_ERR "trying to get vblank count for disabled "
"pipe %d\n", pipe);
return 0;
}
/*
* High & low register fields aren't synchronized, so make sure
* we get a low value that's stable across two reads of the high
* register.
*/
do {
high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
PIPE_FRAME_HIGH_SHIFT);
low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >>
PIPE_FRAME_LOW_SHIFT);
high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
PIPE_FRAME_HIGH_SHIFT);
} while (high1 != high2);
count = (high1 << 8) | low;
/* count may be reset by other driver(e.g. 2D driver),
we have no way to know if it is wrapped or resetted
when count is zero. do a rough guess.
*/
if (count == 0 && dev->last_vblank[pipe] < dev->max_vblank_count/2)
dev->last_vblank[pipe] = 0;
return count;
}
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 iir;
u32 pipea_stats, pipeb_stats;
int vblank = 0;
iir = I915_READ(I915REG_INT_IDENTITY_R);
if (iir == 0) {
DRM_DEBUG ("iir 0x%08x im 0x%08x ie 0x%08x pipea 0x%08x pipeb 0x%08x\n",
iir,
I915_READ(I915REG_INT_MASK_R),
I915_READ(I915REG_INT_ENABLE_R),
I915_READ(I915REG_PIPEASTAT),
I915_READ(I915REG_PIPEBSTAT));
return IRQ_NONE;
}
/*
* Clear the PIPE(A|B)STAT regs before the IIR otherwise
* we may get extra interrupts.
*/
if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
pipea_stats = I915_READ(I915REG_PIPEASTAT);
if (pipea_stats & (I915_START_VBLANK_INTERRUPT_STATUS|
I915_VBLANK_INTERRUPT_STATUS))
{
vblank++;
drm_handle_vblank(dev, i915_get_plane(dev, 0));
}
I915_WRITE(I915REG_PIPEASTAT, pipea_stats);
}
if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
if (pipeb_stats & (I915_START_VBLANK_INTERRUPT_STATUS|
I915_VBLANK_INTERRUPT_STATUS))
{
vblank++;
drm_handle_vblank(dev, i915_get_plane(dev, 1));
}
I915_WRITE(I915REG_PIPEBSTAT, pipeb_stats);
}
if (dev_priv->sarea_priv)
dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
I915_WRITE(I915REG_INT_IDENTITY_R, iir);
(void) I915_READ(I915REG_INT_IDENTITY_R); /* Flush posted write */
if (iir & I915_USER_INTERRUPT) {
DRM_WAKEUP(&dev_priv->irq_queue);
}
if (vblank) {
if (dev_priv->swaps_pending > 0)
drm_locked_tasklet(dev, i915_vblank_tasklet);
}
return IRQ_HANDLED;
}
static int i915_emit_irq(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
RING_LOCALS;
i915_kernel_lost_context(dev);
DRM_DEBUG("\n");
dev_priv->sarea_priv->last_enqueue = ++dev_priv->counter;
if (dev_priv->counter > 0x7FFFFFFFUL)
dev_priv->sarea_priv->last_enqueue = dev_priv->counter = 1;
BEGIN_LP_RING(6);
OUT_RING(CMD_STORE_DWORD_IDX);
OUT_RING(20);
OUT_RING(dev_priv->counter);
OUT_RING(0);
OUT_RING(0);
OUT_RING(GFX_OP_USER_INTERRUPT);
ADVANCE_LP_RING();
return dev_priv->counter;
}
static int i915_wait_irq(struct drm_device * dev, int irq_nr)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = 0;
DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr,
READ_BREADCRUMB(dev_priv));
if (READ_BREADCRUMB(dev_priv) >= irq_nr)
return 0;
dev_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ,
READ_BREADCRUMB(dev_priv) >= irq_nr);
if (ret == -EBUSY) {
DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
READ_BREADCRUMB(dev_priv), (int)dev_priv->counter);
}
if (dev_priv->sarea_priv)
dev_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
return ret;
}
/* Needs the lock as it touches the ring.
*/
int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_emit_t *emit = data;
int result;
LOCK_TEST_WITH_RETURN(dev, file_priv);
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
result = i915_emit_irq(dev);
if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
DRM_ERROR("copy_to_user\n");
return -EFAULT;
}
return 0;
}
/* Doesn't need the hardware lock.
*/
int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_wait_t *irqwait = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return i915_wait_irq(dev, irqwait->irq_seq);
}
int i915_enable_vblank(struct drm_device *dev, int plane)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe = i915_get_pipe(dev, plane);
u32 pipestat_reg = 0;
u32 pipestat;
switch (pipe) {
case 0:
pipestat_reg = I915REG_PIPEASTAT;
dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
break;
case 1:
pipestat_reg = I915REG_PIPEBSTAT;
dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
break;
default:
DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
pipe);
break;
}
if (pipestat_reg)
{
pipestat = I915_READ (pipestat_reg);
/*
* Older chips didn't have the start vblank interrupt,
* but
*/
if (IS_I965G (dev))
pipestat |= I915_START_VBLANK_INTERRUPT_ENABLE;
else
pipestat |= I915_VBLANK_INTERRUPT_ENABLE;
/*
* Clear any pending status
*/
pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS |
I915_VBLANK_INTERRUPT_STATUS);
I915_WRITE(pipestat_reg, pipestat);
}
I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
return 0;
}
void i915_disable_vblank(struct drm_device *dev, int plane)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe = i915_get_pipe(dev, plane);
u32 pipestat_reg = 0;
u32 pipestat;
switch (pipe) {
case 0:
pipestat_reg = I915REG_PIPEASTAT;
dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
break;
case 1:
pipestat_reg = I915REG_PIPEBSTAT;
dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
break;
default:
DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
pipe);
break;
}
I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
if (pipestat_reg)
{
pipestat = I915_READ (pipestat_reg);
pipestat &= ~(I915_START_VBLANK_INTERRUPT_ENABLE |
I915_VBLANK_INTERRUPT_ENABLE);
/*
* Clear any pending status
*/
pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS |
I915_VBLANK_INTERRUPT_STATUS);
I915_WRITE(pipestat_reg, pipestat);
}
}
static void i915_enable_interrupt (struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
dev_priv->irq_enable_reg |= I915_USER_INTERRUPT;
I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
dev_priv->irq_enabled = 1;
}
/* Set the vblank monitor pipe
*/
int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_pipe_t *pipe = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
if (pipe->pipe & ~(DRM_I915_VBLANK_PIPE_A|DRM_I915_VBLANK_PIPE_B)) {
DRM_ERROR("called with invalid pipe 0x%x\n", pipe->pipe);
return -EINVAL;
}
dev_priv->vblank_pipe = pipe->pipe;
return 0;
}
int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_pipe_t *pipe = data;
u16 flag;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
flag = I915_READ(I915REG_INT_ENABLE_R);
pipe->pipe = 0;
if (flag & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT)
pipe->pipe |= DRM_I915_VBLANK_PIPE_A;
if (flag & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
pipe->pipe |= DRM_I915_VBLANK_PIPE_B;
return 0;
}
/**
* Schedule buffer swap at given vertical blank.
*/
int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_swap_t *swap = data;
drm_i915_vbl_swap_t *vbl_swap;
unsigned int pipe, seqtype, curseq, plane;
unsigned long irqflags;
struct list_head *list;
int ret;
if (!dev_priv) {
DRM_ERROR("%s called with no initialization\n", __func__);
return -EINVAL;
}
if (!dev_priv->sarea_priv || dev_priv->sarea_priv->rotation) {
DRM_DEBUG("Rotation not supported\n");
return -EINVAL;
}
if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE |
_DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS |
_DRM_VBLANK_FLIP)) {
DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype);
return -EINVAL;
}
plane = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
pipe = i915_get_pipe(dev, plane);
seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE);
if (!(dev_priv->vblank_pipe & (1 << pipe))) {
DRM_ERROR("Invalid pipe %d\n", pipe);
return -EINVAL;
}
spin_lock_irqsave(&dev->drw_lock, irqflags);
/* It makes no sense to schedule a swap for a drawable that doesn't have
* valid information at this point. E.g. this could mean that the X
* server is too old to push drawable information to the DRM, in which
* case all such swaps would become ineffective.
*/
if (!drm_get_drawable_info(dev, swap->drawable)) {
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable);
return -EINVAL;
}
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
drm_update_vblank_count(dev, pipe);
curseq = drm_vblank_count(dev, pipe);
if (seqtype == _DRM_VBLANK_RELATIVE)
swap->sequence += curseq;
if ((curseq - swap->sequence) <= (1<<23)) {
if (swap->seqtype & _DRM_VBLANK_NEXTONMISS) {
swap->sequence = curseq + 1;
} else {
DRM_DEBUG("Missed target sequence\n");
return -EINVAL;
}
}
if (swap->seqtype & _DRM_VBLANK_FLIP) {
swap->sequence--;
if ((curseq - swap->sequence) <= (1<<23)) {
struct drm_drawable_info *drw;
LOCK_TEST_WITH_RETURN(dev, file_priv);
spin_lock_irqsave(&dev->drw_lock, irqflags);
drw = drm_get_drawable_info(dev, swap->drawable);
if (!drw) {
spin_unlock_irqrestore(&dev->drw_lock,
irqflags);
DRM_DEBUG("Invalid drawable ID %d\n",
swap->drawable);
return -EINVAL;
}
i915_dispatch_vsync_flip(dev, drw, plane);
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
return 0;
}
}
spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
list_for_each(list, &dev_priv->vbl_swaps.head) {
vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head);
if (vbl_swap->drw_id == swap->drawable &&
vbl_swap->plane == plane &&
vbl_swap->sequence == swap->sequence) {
vbl_swap->flip = (swap->seqtype & _DRM_VBLANK_FLIP);
spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
DRM_DEBUG("Already scheduled\n");
return 0;
}
}
spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
if (dev_priv->swaps_pending >= 100) {
DRM_DEBUG("Too many swaps queued\n");
return -EBUSY;
}
vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER);
if (!vbl_swap) {
DRM_ERROR("Failed to allocate memory to queue swap\n");
return -ENOMEM;
}
DRM_DEBUG("\n");
ret = drm_vblank_get(dev, pipe);
if (ret) {
drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
return ret;
}
vbl_swap->drw_id = swap->drawable;
vbl_swap->plane = plane;
vbl_swap->sequence = swap->sequence;
vbl_swap->flip = (swap->seqtype & _DRM_VBLANK_FLIP);
if (vbl_swap->flip)
swap->sequence++;
spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head);
dev_priv->swaps_pending++;
spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
return 0;
}
/* drm_dma.h hooks
*/
void i915_driver_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE16(I915REG_HWSTAM, 0xeffe);
I915_WRITE16(I915REG_INT_MASK_R, 0x0);
I915_WRITE16(I915REG_INT_ENABLE_R, 0x0);
}
int i915_driver_irq_postinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret, num_pipes = 2;
spin_lock_init(&dev_priv->swaps_lock);
INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
dev_priv->swaps_pending = 0;
dev_priv->user_irq_refcount = 0;
dev_priv->irq_enable_reg = 0;
ret = drm_vblank_init(dev, num_pipes);
if (ret)
return ret;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
i915_enable_interrupt(dev);
DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
/*
* Initialize the hardware status page IRQ location.
*/
I915_WRITE(I915REG_INSTPM, (1 << 5) | (1 << 21));
return 0;
}
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 temp;
if (!dev_priv)
return;
dev_priv->irq_enabled = 0;
I915_WRITE(I915REG_HWSTAM, 0xffffffff);
I915_WRITE(I915REG_INT_MASK_R, 0xffffffff);
I915_WRITE(I915REG_INT_ENABLE_R, 0x0);
temp = I915_READ(I915REG_PIPEASTAT);
I915_WRITE(I915REG_PIPEASTAT, temp);
temp = I915_READ(I915REG_PIPEBSTAT);
I915_WRITE(I915REG_PIPEBSTAT, temp);
temp = I915_READ(I915REG_INT_IDENTITY_R);
I915_WRITE(I915REG_INT_IDENTITY_R, temp);
}