| /* |
| * Copyright (C) 2004 IBM Corporation |
| * |
| * Authors: |
| * Leendert van Doorn <leendert@watson.ibm.com> |
| * Dave Safford <safford@watson.ibm.com> |
| * Reiner Sailer <sailer@watson.ibm.com> |
| * Kylene Hall <kjhall@us.ibm.com> |
| * |
| * Maintained by: <tpmdd_devel@lists.sourceforge.net> |
| * |
| * Device driver for TCG/TCPA TPM (trusted platform module). |
| * Specifications at www.trustedcomputinggroup.org |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation, version 2 of the |
| * License. |
| * |
| */ |
| |
| #include "tpm.h" |
| |
| /* Atmel definitions */ |
| enum tpm_atmel_addr { |
| TPM_ATMEL_BASE_ADDR_LO = 0x08, |
| TPM_ATMEL_BASE_ADDR_HI = 0x09 |
| }; |
| |
| /* write status bits */ |
| enum tpm_atmel_write_status { |
| ATML_STATUS_ABORT = 0x01, |
| ATML_STATUS_LASTBYTE = 0x04 |
| }; |
| /* read status bits */ |
| enum tpm_atmel_read_status { |
| ATML_STATUS_BUSY = 0x01, |
| ATML_STATUS_DATA_AVAIL = 0x02, |
| ATML_STATUS_REWRITE = 0x04, |
| ATML_STATUS_READY = 0x08 |
| }; |
| |
| static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) |
| { |
| u8 status, *hdr = buf; |
| u32 size; |
| int i; |
| __be32 *native_size; |
| |
| /* start reading header */ |
| if (count < 6) |
| return -EIO; |
| |
| for (i = 0; i < 6; i++) { |
| status = inb(chip->vendor->base + 1); |
| if ((status & ATML_STATUS_DATA_AVAIL) == 0) { |
| dev_err(chip->dev, |
| "error reading header\n"); |
| return -EIO; |
| } |
| *buf++ = inb(chip->vendor->base); |
| } |
| |
| /* size of the data received */ |
| native_size = (__force __be32 *) (hdr + 2); |
| size = be32_to_cpu(*native_size); |
| |
| if (count < size) { |
| dev_err(chip->dev, |
| "Recv size(%d) less than available space\n", size); |
| for (; i < size; i++) { /* clear the waiting data anyway */ |
| status = inb(chip->vendor->base + 1); |
| if ((status & ATML_STATUS_DATA_AVAIL) == 0) { |
| dev_err(chip->dev, |
| "error reading data\n"); |
| return -EIO; |
| } |
| } |
| return -EIO; |
| } |
| |
| /* read all the data available */ |
| for (; i < size; i++) { |
| status = inb(chip->vendor->base + 1); |
| if ((status & ATML_STATUS_DATA_AVAIL) == 0) { |
| dev_err(chip->dev, |
| "error reading data\n"); |
| return -EIO; |
| } |
| *buf++ = inb(chip->vendor->base); |
| } |
| |
| /* make sure data available is gone */ |
| status = inb(chip->vendor->base + 1); |
| if (status & ATML_STATUS_DATA_AVAIL) { |
| dev_err(chip->dev, "data available is stuck\n"); |
| return -EIO; |
| } |
| |
| return size; |
| } |
| |
| static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) |
| { |
| int i; |
| |
| dev_dbg(chip->dev, "tpm_atml_send:\n"); |
| for (i = 0; i < count; i++) { |
| dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]); |
| outb(buf[i], chip->vendor->base); |
| } |
| |
| return count; |
| } |
| |
| static void tpm_atml_cancel(struct tpm_chip *chip) |
| { |
| outb(ATML_STATUS_ABORT, chip->vendor->base + 1); |
| } |
| |
| static u8 tpm_atml_status(struct tpm_chip *chip) |
| { |
| return inb(chip->vendor->base + 1); |
| } |
| |
| static struct file_operations atmel_ops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .open = tpm_open, |
| .read = tpm_read, |
| .write = tpm_write, |
| .release = tpm_release, |
| }; |
| |
| static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); |
| static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); |
| static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL); |
| static DEVICE_ATTR(cancel, S_IWUSR |S_IWGRP, NULL, tpm_store_cancel); |
| |
| static struct attribute* atmel_attrs[] = { |
| &dev_attr_pubek.attr, |
| &dev_attr_pcrs.attr, |
| &dev_attr_caps.attr, |
| &dev_attr_cancel.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group atmel_attr_grp = { .attrs = atmel_attrs }; |
| |
| static struct tpm_vendor_specific tpm_atmel = { |
| .recv = tpm_atml_recv, |
| .send = tpm_atml_send, |
| .cancel = tpm_atml_cancel, |
| .status = tpm_atml_status, |
| .req_complete_mask = ATML_STATUS_BUSY | ATML_STATUS_DATA_AVAIL, |
| .req_complete_val = ATML_STATUS_DATA_AVAIL, |
| .req_canceled = ATML_STATUS_READY, |
| .attr_group = &atmel_attr_grp, |
| .miscdev = { .fops = &atmel_ops, }, |
| }; |
| |
| static struct platform_device *pdev; |
| |
| static void __devexit tpm_atml_remove(struct device *dev) |
| { |
| struct tpm_chip *chip = dev_get_drvdata(dev); |
| if (chip) { |
| release_region(chip->vendor->base, 2); |
| tpm_remove_hardware(chip->dev); |
| } |
| } |
| |
| static struct device_driver atml_drv = { |
| .name = "tpm_atmel", |
| .bus = &platform_bus_type, |
| .owner = THIS_MODULE, |
| .suspend = tpm_pm_suspend, |
| .resume = tpm_pm_resume, |
| }; |
| |
| static int __init init_atmel(void) |
| { |
| int rc = 0; |
| int lo, hi; |
| |
| driver_register(&atml_drv); |
| |
| lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO); |
| hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI); |
| |
| tpm_atmel.base = (hi<<8)|lo; |
| |
| /* verify that it is an Atmel part */ |
| if (tpm_read_index(TPM_ADDR, 4) != 'A' || tpm_read_index(TPM_ADDR, 5) != 'T' |
| || tpm_read_index(TPM_ADDR, 6) != 'M' || tpm_read_index(TPM_ADDR, 7) != 'L') { |
| return -ENODEV; |
| } |
| |
| /* verify chip version number is 1.1 */ |
| if ( (tpm_read_index(TPM_ADDR, 0x00) != 0x01) || |
| (tpm_read_index(TPM_ADDR, 0x01) != 0x01 )) |
| return -ENODEV; |
| |
| pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); |
| if ( !pdev ) |
| return -ENOMEM; |
| |
| pdev->name = "tpm_atmel0"; |
| pdev->id = -1; |
| pdev->num_resources = 0; |
| pdev->dev.release = tpm_atml_remove; |
| pdev->dev.driver = &atml_drv; |
| |
| if ((rc = platform_device_register(pdev)) < 0) { |
| kfree(pdev); |
| pdev = NULL; |
| return rc; |
| } |
| |
| if (request_region(tpm_atmel.base, 2, "tpm_atmel0") == NULL ) { |
| platform_device_unregister(pdev); |
| kfree(pdev); |
| pdev = NULL; |
| return -EBUSY; |
| } |
| |
| if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0) { |
| release_region(tpm_atmel.base, 2); |
| platform_device_unregister(pdev); |
| kfree(pdev); |
| pdev = NULL; |
| return rc; |
| } |
| |
| dev_info(&pdev->dev, "Atmel TPM 1.1, Base Address: 0x%x\n", |
| tpm_atmel.base); |
| return 0; |
| } |
| |
| static void __exit cleanup_atmel(void) |
| { |
| if (pdev) { |
| tpm_atml_remove(&pdev->dev); |
| platform_device_unregister(pdev); |
| kfree(pdev); |
| pdev = NULL; |
| } |
| |
| driver_unregister(&atml_drv); |
| } |
| |
| module_init(init_atmel); |
| module_exit(cleanup_atmel); |
| |
| MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)"); |
| MODULE_DESCRIPTION("TPM Driver"); |
| MODULE_VERSION("2.0"); |
| MODULE_LICENSE("GPL"); |