| /* |
| * Low-level system-call handling, trap handlers and context-switching |
| * |
| * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> |
| * Copyright (C) 2008-2009 PetaLogix |
| * Copyright (C) 2003 John Williams <jwilliams@itee.uq.edu.au> |
| * Copyright (C) 2001,2002 NEC Corporation |
| * Copyright (C) 2001,2002 Miles Bader <miles@gnu.org> |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file COPYING in the main directory of this |
| * archive for more details. |
| * |
| * Written by Miles Bader <miles@gnu.org> |
| * Heavily modified by John Williams for Microblaze |
| */ |
| |
| #include <linux/sys.h> |
| #include <linux/linkage.h> |
| |
| #include <asm/entry.h> |
| #include <asm/current.h> |
| #include <asm/processor.h> |
| #include <asm/exceptions.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/thread_info.h> |
| |
| #include <asm/page.h> |
| #include <asm/unistd.h> |
| |
| #include <linux/errno.h> |
| #include <asm/signal.h> |
| |
| /* The size of a state save frame. */ |
| #define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE) |
| |
| /* The offset of the struct pt_regs in a `state save frame' on the stack. */ |
| #define PTO STATE_SAVE_ARG_SPACE /* 24 the space for args */ |
| |
| #define C_ENTRY(name) .globl name; .align 4; name |
| |
| /* |
| * Various ways of setting and clearing BIP in flags reg. |
| * This is mucky, but necessary using microblaze version that |
| * allows msr ops to write to BIP |
| */ |
| #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR |
| .macro clear_bip |
| msrclr r11, MSR_BIP |
| nop |
| .endm |
| |
| .macro set_bip |
| msrset r11, MSR_BIP |
| nop |
| .endm |
| |
| .macro clear_eip |
| msrclr r11, MSR_EIP |
| nop |
| .endm |
| |
| .macro set_ee |
| msrset r11, MSR_EE |
| nop |
| .endm |
| |
| .macro disable_irq |
| msrclr r11, MSR_IE |
| nop |
| .endm |
| |
| .macro enable_irq |
| msrset r11, MSR_IE |
| nop |
| .endm |
| |
| .macro set_ums |
| msrset r11, MSR_UMS |
| nop |
| msrclr r11, MSR_VMS |
| nop |
| .endm |
| |
| .macro set_vms |
| msrclr r11, MSR_UMS |
| nop |
| msrset r11, MSR_VMS |
| nop |
| .endm |
| |
| .macro clear_vms_ums |
| msrclr r11, MSR_VMS |
| nop |
| msrclr r11, MSR_UMS |
| nop |
| .endm |
| #else |
| .macro clear_bip |
| mfs r11, rmsr |
| nop |
| andi r11, r11, ~MSR_BIP |
| mts rmsr, r11 |
| nop |
| .endm |
| |
| .macro set_bip |
| mfs r11, rmsr |
| nop |
| ori r11, r11, MSR_BIP |
| mts rmsr, r11 |
| nop |
| .endm |
| |
| .macro clear_eip |
| mfs r11, rmsr |
| nop |
| andi r11, r11, ~MSR_EIP |
| mts rmsr, r11 |
| nop |
| .endm |
| |
| .macro set_ee |
| mfs r11, rmsr |
| nop |
| ori r11, r11, MSR_EE |
| mts rmsr, r11 |
| nop |
| .endm |
| |
| .macro disable_irq |
| mfs r11, rmsr |
| nop |
| andi r11, r11, ~MSR_IE |
| mts rmsr, r11 |
| nop |
| .endm |
| |
| .macro enable_irq |
| mfs r11, rmsr |
| nop |
| ori r11, r11, MSR_IE |
| mts rmsr, r11 |
| nop |
| .endm |
| |
| .macro set_ums |
| mfs r11, rmsr |
| nop |
| ori r11, r11, MSR_VMS |
| andni r11, r11, MSR_UMS |
| mts rmsr, r11 |
| nop |
| .endm |
| |
| .macro set_vms |
| mfs r11, rmsr |
| nop |
| ori r11, r11, MSR_VMS |
| andni r11, r11, MSR_UMS |
| mts rmsr, r11 |
| nop |
| .endm |
| |
| .macro clear_vms_ums |
| mfs r11, rmsr |
| nop |
| andni r11, r11, (MSR_VMS|MSR_UMS) |
| mts rmsr,r11 |
| nop |
| .endm |
| #endif |
| |
| /* Define how to call high-level functions. With MMU, virtual mode must be |
| * enabled when calling the high-level function. Clobbers R11. |
| * VM_ON, VM_OFF, DO_JUMP_BIPCLR, DO_CALL |
| */ |
| |
| /* turn on virtual protected mode save */ |
| #define VM_ON \ |
| set_ums; \ |
| rted r0, 2f; \ |
| 2: nop; |
| |
| /* turn off virtual protected mode save and user mode save*/ |
| #define VM_OFF \ |
| clear_vms_ums; \ |
| rted r0, TOPHYS(1f); \ |
| 1: nop; |
| |
| #define SAVE_REGS \ |
| swi r2, r1, PTO+PT_R2; /* Save SDA */ \ |
| swi r5, r1, PTO+PT_R5; \ |
| swi r6, r1, PTO+PT_R6; \ |
| swi r7, r1, PTO+PT_R7; \ |
| swi r8, r1, PTO+PT_R8; \ |
| swi r9, r1, PTO+PT_R9; \ |
| swi r10, r1, PTO+PT_R10; \ |
| swi r11, r1, PTO+PT_R11; /* save clobbered regs after rval */\ |
| swi r12, r1, PTO+PT_R12; \ |
| swi r13, r1, PTO+PT_R13; /* Save SDA2 */ \ |
| swi r14, r1, PTO+PT_PC; /* PC, before IRQ/trap */ \ |
| swi r15, r1, PTO+PT_R15; /* Save LP */ \ |
| swi r18, r1, PTO+PT_R18; /* Save asm scratch reg */ \ |
| swi r19, r1, PTO+PT_R19; \ |
| swi r20, r1, PTO+PT_R20; \ |
| swi r21, r1, PTO+PT_R21; \ |
| swi r22, r1, PTO+PT_R22; \ |
| swi r23, r1, PTO+PT_R23; \ |
| swi r24, r1, PTO+PT_R24; \ |
| swi r25, r1, PTO+PT_R25; \ |
| swi r26, r1, PTO+PT_R26; \ |
| swi r27, r1, PTO+PT_R27; \ |
| swi r28, r1, PTO+PT_R28; \ |
| swi r29, r1, PTO+PT_R29; \ |
| swi r30, r1, PTO+PT_R30; \ |
| swi r31, r1, PTO+PT_R31; /* Save current task reg */ \ |
| mfs r11, rmsr; /* save MSR */ \ |
| nop; \ |
| swi r11, r1, PTO+PT_MSR; |
| |
| #define RESTORE_REGS \ |
| lwi r11, r1, PTO+PT_MSR; \ |
| mts rmsr , r11; \ |
| nop; \ |
| lwi r2, r1, PTO+PT_R2; /* restore SDA */ \ |
| lwi r5, r1, PTO+PT_R5; \ |
| lwi r6, r1, PTO+PT_R6; \ |
| lwi r7, r1, PTO+PT_R7; \ |
| lwi r8, r1, PTO+PT_R8; \ |
| lwi r9, r1, PTO+PT_R9; \ |
| lwi r10, r1, PTO+PT_R10; \ |
| lwi r11, r1, PTO+PT_R11; /* restore clobbered regs after rval */\ |
| lwi r12, r1, PTO+PT_R12; \ |
| lwi r13, r1, PTO+PT_R13; /* restore SDA2 */ \ |
| lwi r14, r1, PTO+PT_PC; /* RESTORE_LINK PC, before IRQ/trap */\ |
| lwi r15, r1, PTO+PT_R15; /* restore LP */ \ |
| lwi r18, r1, PTO+PT_R18; /* restore asm scratch reg */ \ |
| lwi r19, r1, PTO+PT_R19; \ |
| lwi r20, r1, PTO+PT_R20; \ |
| lwi r21, r1, PTO+PT_R21; \ |
| lwi r22, r1, PTO+PT_R22; \ |
| lwi r23, r1, PTO+PT_R23; \ |
| lwi r24, r1, PTO+PT_R24; \ |
| lwi r25, r1, PTO+PT_R25; \ |
| lwi r26, r1, PTO+PT_R26; \ |
| lwi r27, r1, PTO+PT_R27; \ |
| lwi r28, r1, PTO+PT_R28; \ |
| lwi r29, r1, PTO+PT_R29; \ |
| lwi r30, r1, PTO+PT_R30; \ |
| lwi r31, r1, PTO+PT_R31; /* Restore cur task reg */ |
| |
| .text |
| |
| /* |
| * User trap. |
| * |
| * System calls are handled here. |
| * |
| * Syscall protocol: |
| * Syscall number in r12, args in r5-r10 |
| * Return value in r3 |
| * |
| * Trap entered via brki instruction, so BIP bit is set, and interrupts |
| * are masked. This is nice, means we don't have to CLI before state save |
| */ |
| C_ENTRY(_user_exception): |
| swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ |
| addi r14, r14, 4 /* return address is 4 byte after call */ |
| swi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */ |
| |
| lwi r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/ |
| beqi r11, 1f; /* Jump ahead if coming from user */ |
| /* Kernel-mode state save. */ |
| lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/ |
| tophys(r1,r11); |
| swi r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */ |
| lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */ |
| |
| addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ |
| SAVE_REGS |
| |
| addi r11, r0, 1; /* Was in kernel-mode. */ |
| swi r11, r1, PTO+PT_MODE; /* pt_regs -> kernel mode */ |
| brid 2f; |
| nop; /* Fill delay slot */ |
| |
| /* User-mode state save. */ |
| 1: |
| lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */ |
| lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ |
| tophys(r1,r1); |
| lwi r1, r1, TS_THREAD_INFO; /* get stack from task_struct */ |
| /* calculate kernel stack pointer from task struct 8k */ |
| addik r1, r1, THREAD_SIZE; |
| tophys(r1,r1); |
| |
| addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ |
| SAVE_REGS |
| |
| swi r0, r1, PTO+PT_MODE; /* Was in user-mode. */ |
| lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); |
| swi r11, r1, PTO+PT_R1; /* Store user SP. */ |
| addi r11, r0, 1; |
| swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode. */ |
| 2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ |
| /* Save away the syscall number. */ |
| swi r12, r1, PTO+PT_R0; |
| tovirt(r1,r1) |
| |
| la r15, r0, ret_from_trap-8 |
| /* where the trap should return need -8 to adjust for rtsd r15, 8*/ |
| /* Jump to the appropriate function for the system call number in r12 |
| * (r12 is not preserved), or return an error if r12 is not valid. The LP |
| * register should point to the location where |
| * the called function should return. [note that MAKE_SYS_CALL uses label 1] */ |
| /* See if the system call number is valid. */ |
| addi r11, r12, -__NR_syscalls; |
| bgei r11,1f; |
| /* Figure out which function to use for this system call. */ |
| /* Note Microblaze barrel shift is optional, so don't rely on it */ |
| add r12, r12, r12; /* convert num -> ptr */ |
| add r12, r12, r12; |
| |
| /* Trac syscalls and stored them to r0_ram */ |
| lwi r3, r12, 0x400 + TOPHYS(r0_ram) |
| addi r3, r3, 1 |
| swi r3, r12, 0x400 + TOPHYS(r0_ram) |
| |
| lwi r12, r12, TOPHYS(sys_call_table); /* Function ptr */ |
| /* Make the system call. to r12*/ |
| set_vms; |
| rtid r12, 0; |
| nop; |
| /* The syscall number is invalid, return an error. */ |
| 1: VM_ON; /* RETURN() expects virtual mode*/ |
| addi r3, r0, -ENOSYS; |
| rtsd r15,8; /* looks like a normal subroutine return */ |
| or r0, r0, r0 |
| |
| |
| /* Entry point used to return from a syscall/trap. */ |
| /* We re-enable BIP bit before state restore */ |
| C_ENTRY(ret_from_trap): |
| set_bip; /* Ints masked for state restore*/ |
| lwi r11, r1, PTO+PT_MODE; |
| /* See if returning to kernel mode, if so, skip resched &c. */ |
| bnei r11, 2f; |
| |
| /* We're returning to user mode, so check for various conditions that |
| * trigger rescheduling. */ |
| /* Get current task ptr into r11 */ |
| add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| lwi r11, r11, TS_THREAD_INFO; /* get thread info */ |
| lwi r11, r11, TI_FLAGS; /* get flags in thread info */ |
| andi r11, r11, _TIF_NEED_RESCHED; |
| beqi r11, 5f; |
| |
| swi r3, r1, PTO + PT_R3; /* store syscall result */ |
| swi r4, r1, PTO + PT_R4; |
| bralid r15, schedule; /* Call scheduler */ |
| nop; /* delay slot */ |
| lwi r3, r1, PTO + PT_R3; /* restore syscall result */ |
| lwi r4, r1, PTO + PT_R4; |
| |
| /* Maybe handle a signal */ |
| 5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| lwi r11, r11, TS_THREAD_INFO; /* get thread info */ |
| lwi r11, r11, TI_FLAGS; /* get flags in thread info */ |
| andi r11, r11, _TIF_SIGPENDING; |
| beqi r11, 1f; /* Signals to handle, handle them */ |
| |
| swi r3, r1, PTO + PT_R3; /* store syscall result */ |
| swi r4, r1, PTO + PT_R4; |
| la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ |
| add r6, r0, r0; /* Arg 2: sigset_t *oldset */ |
| addi r7, r0, 1; /* Arg 3: int in_syscall */ |
| bralid r15, do_signal; /* Handle any signals */ |
| nop; |
| lwi r3, r1, PTO + PT_R3; /* restore syscall result */ |
| lwi r4, r1, PTO + PT_R4; |
| |
| /* Finally, return to user state. */ |
| 1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */ |
| add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */ |
| VM_OFF; |
| tophys(r1,r1); |
| RESTORE_REGS; |
| addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ |
| lwi r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */ |
| bri 6f; |
| |
| /* Return to kernel state. */ |
| 2: VM_OFF; |
| tophys(r1,r1); |
| RESTORE_REGS; |
| addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ |
| tovirt(r1,r1); |
| 6: |
| TRAP_return: /* Make global symbol for debugging */ |
| rtbd r14, 0; /* Instructions to return from an IRQ */ |
| nop; |
| |
| |
| /* These syscalls need access to the struct pt_regs on the stack, so we |
| implement them in assembly (they're basically all wrappers anyway). */ |
| |
| C_ENTRY(sys_fork_wrapper): |
| addi r5, r0, SIGCHLD /* Arg 0: flags */ |
| lwi r6, r1, PTO+PT_R1 /* Arg 1: child SP (use parent's) */ |
| la r7, r1, PTO /* Arg 2: parent context */ |
| add r8. r0, r0 /* Arg 3: (unused) */ |
| add r9, r0, r0; /* Arg 4: (unused) */ |
| add r10, r0, r0; /* Arg 5: (unused) */ |
| brid do_fork /* Do real work (tail-call) */ |
| nop; |
| |
| /* This the initial entry point for a new child thread, with an appropriate |
| stack in place that makes it look the the child is in the middle of an |
| syscall. This function is actually `returned to' from switch_thread |
| (copy_thread makes ret_from_fork the return address in each new thread's |
| saved context). */ |
| C_ENTRY(ret_from_fork): |
| bralid r15, schedule_tail; /* ...which is schedule_tail's arg */ |
| add r3, r5, r0; /* switch_thread returns the prev task */ |
| /* ( in the delay slot ) */ |
| add r3, r0, r0; /* Child's fork call should return 0. */ |
| brid ret_from_trap; /* Do normal trap return */ |
| nop; |
| |
| C_ENTRY(sys_vfork): |
| brid microblaze_vfork /* Do real work (tail-call) */ |
| la r5, r1, PTO |
| |
| C_ENTRY(sys_clone): |
| bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */ |
| lwi r6, r1, PTO+PT_R1; /* If so, use paret's stack ptr */ |
| 1: la r7, r1, PTO; /* Arg 2: parent context */ |
| add r8, r0, r0; /* Arg 3: (unused) */ |
| add r9, r0, r0; /* Arg 4: (unused) */ |
| add r10, r0, r0; /* Arg 5: (unused) */ |
| brid do_fork /* Do real work (tail-call) */ |
| nop; |
| |
| C_ENTRY(sys_execve): |
| la r8, r1, PTO; /* add user context as 4th arg */ |
| brid microblaze_execve; /* Do real work (tail-call).*/ |
| nop; |
| |
| C_ENTRY(sys_rt_sigsuspend_wrapper): |
| swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| swi r4, r1, PTO+PT_R4; |
| la r7, r1, PTO; /* add user context as 3rd arg */ |
| brlid r15, sys_rt_sigsuspend; /* Do real work.*/ |
| nop; |
| lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| lwi r4, r1, PTO+PT_R4; |
| bri ret_from_trap /* fall through will not work here due to align */ |
| nop; |
| |
| C_ENTRY(sys_rt_sigreturn_wrapper): |
| swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| swi r4, r1, PTO+PT_R4; |
| la r5, r1, PTO; /* add user context as 1st arg */ |
| brlid r15, sys_rt_sigreturn /* Do real work */ |
| nop; |
| lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| lwi r4, r1, PTO+PT_R4; |
| bri ret_from_trap /* fall through will not work here due to align */ |
| nop; |
| |
| /* |
| * HW EXCEPTION rutine start |
| */ |
| |
| #define SAVE_STATE \ |
| swi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */ \ |
| set_bip; /*equalize initial state for all possible entries*/\ |
| clear_eip; \ |
| enable_irq; \ |
| set_ee; \ |
| /* See if already in kernel mode.*/ \ |
| lwi r11, r0, TOPHYS(PER_CPU(KM)); \ |
| beqi r11, 1f; /* Jump ahead if coming from user */\ |
| /* Kernel-mode state save. */ \ |
| /* Reload kernel stack-ptr. */ \ |
| lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); \ |
| tophys(r1,r11); \ |
| swi r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */ \ |
| lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\ |
| addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */\ |
| /* store return registers separately because \ |
| * this macros is use for others exceptions */ \ |
| swi r3, r1, PTO + PT_R3; \ |
| swi r4, r1, PTO + PT_R4; \ |
| SAVE_REGS \ |
| /* PC, before IRQ/trap - this is one instruction above */ \ |
| swi r17, r1, PTO+PT_PC; \ |
| \ |
| addi r11, r0, 1; /* Was in kernel-mode. */ \ |
| swi r11, r1, PTO+PT_MODE; \ |
| brid 2f; \ |
| nop; /* Fill delay slot */ \ |
| 1: /* User-mode state save. */ \ |
| lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\ |
| lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\ |
| tophys(r1,r1); \ |
| lwi r1, r1, TS_THREAD_INFO; /* get the thread info */ \ |
| addik r1, r1, THREAD_SIZE; /* calculate kernel stack pointer */\ |
| tophys(r1,r1); \ |
| \ |
| addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */\ |
| /* store return registers separately because this macros \ |
| * is use for others exceptions */ \ |
| swi r3, r1, PTO + PT_R3; \ |
| swi r4, r1, PTO + PT_R4; \ |
| SAVE_REGS \ |
| /* PC, before IRQ/trap - this is one instruction above FIXME*/ \ |
| swi r17, r1, PTO+PT_PC; \ |
| \ |
| swi r0, r1, PTO+PT_MODE; /* Was in user-mode. */ \ |
| lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); \ |
| swi r11, r1, PTO+PT_R1; /* Store user SP. */ \ |
| addi r11, r0, 1; \ |
| swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\ |
| 2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\ |
| /* Save away the syscall number. */ \ |
| swi r0, r1, PTO+PT_R0; \ |
| tovirt(r1,r1) |
| |
| C_ENTRY(full_exception_trap): |
| swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ |
| /* adjust exception address for privileged instruction |
| * for finding where is it */ |
| addik r17, r17, -4 |
| SAVE_STATE /* Save registers */ |
| /* FIXME this can be store directly in PT_ESR reg. |
| * I tested it but there is a fault */ |
| /* where the trap should return need -8 to adjust for rtsd r15, 8 */ |
| la r15, r0, ret_from_exc - 8 |
| la r5, r1, PTO /* parameter struct pt_regs * regs */ |
| mfs r6, resr |
| nop |
| mfs r7, rfsr; /* save FSR */ |
| nop |
| la r12, r0, full_exception |
| set_vms; |
| rtbd r12, 0; |
| nop; |
| |
| /* |
| * Unaligned data trap. |
| * |
| * Unaligned data trap last on 4k page is handled here. |
| * |
| * Trap entered via exception, so EE bit is set, and interrupts |
| * are masked. This is nice, means we don't have to CLI before state save |
| * |
| * The assembler routine is in "arch/microblaze/kernel/hw_exception_handler.S" |
| */ |
| C_ENTRY(unaligned_data_trap): |
| swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ |
| SAVE_STATE /* Save registers.*/ |
| /* where the trap should return need -8 to adjust for rtsd r15, 8 */ |
| la r15, r0, ret_from_exc-8 |
| mfs r3, resr /* ESR */ |
| nop |
| mfs r4, rear /* EAR */ |
| nop |
| la r7, r1, PTO /* parameter struct pt_regs * regs */ |
| la r12, r0, _unaligned_data_exception |
| set_vms; |
| rtbd r12, 0; /* interrupts enabled */ |
| nop; |
| |
| /* |
| * Page fault traps. |
| * |
| * If the real exception handler (from hw_exception_handler.S) didn't find |
| * the mapping for the process, then we're thrown here to handle such situation. |
| * |
| * Trap entered via exceptions, so EE bit is set, and interrupts |
| * are masked. This is nice, means we don't have to CLI before state save |
| * |
| * Build a standard exception frame for TLB Access errors. All TLB exceptions |
| * will bail out to this point if they can't resolve the lightweight TLB fault. |
| * |
| * The C function called is in "arch/microblaze/mm/fault.c", declared as: |
| * void do_page_fault(struct pt_regs *regs, |
| * unsigned long address, |
| * unsigned long error_code) |
| */ |
| /* data and intruction trap - which is choose is resolved int fault.c */ |
| C_ENTRY(page_fault_data_trap): |
| swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ |
| SAVE_STATE /* Save registers.*/ |
| /* where the trap should return need -8 to adjust for rtsd r15, 8 */ |
| la r15, r0, ret_from_exc-8 |
| la r5, r1, PTO /* parameter struct pt_regs * regs */ |
| mfs r6, rear /* parameter unsigned long address */ |
| nop |
| mfs r7, resr /* parameter unsigned long error_code */ |
| nop |
| la r12, r0, do_page_fault |
| set_vms; |
| rtbd r12, 0; /* interrupts enabled */ |
| nop; |
| |
| C_ENTRY(page_fault_instr_trap): |
| swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ |
| SAVE_STATE /* Save registers.*/ |
| /* where the trap should return need -8 to adjust for rtsd r15, 8 */ |
| la r15, r0, ret_from_exc-8 |
| la r5, r1, PTO /* parameter struct pt_regs * regs */ |
| mfs r6, rear /* parameter unsigned long address */ |
| nop |
| ori r7, r0, 0 /* parameter unsigned long error_code */ |
| la r12, r0, do_page_fault |
| set_vms; |
| rtbd r12, 0; /* interrupts enabled */ |
| nop; |
| |
| /* Entry point used to return from an exception. */ |
| C_ENTRY(ret_from_exc): |
| set_bip; /* Ints masked for state restore*/ |
| lwi r11, r1, PTO+PT_MODE; |
| bnei r11, 2f; /* See if returning to kernel mode, */ |
| /* ... if so, skip resched &c. */ |
| |
| /* We're returning to user mode, so check for various conditions that |
| trigger rescheduling. */ |
| /* Get current task ptr into r11 */ |
| add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| lwi r11, r11, TS_THREAD_INFO; /* get thread info */ |
| lwi r11, r11, TI_FLAGS; /* get flags in thread info */ |
| andi r11, r11, _TIF_NEED_RESCHED; |
| beqi r11, 5f; |
| |
| /* Call the scheduler before returning from a syscall/trap. */ |
| bralid r15, schedule; /* Call scheduler */ |
| nop; /* delay slot */ |
| |
| /* Maybe handle a signal */ |
| 5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| lwi r11, r11, TS_THREAD_INFO; /* get thread info */ |
| lwi r11, r11, TI_FLAGS; /* get flags in thread info */ |
| andi r11, r11, _TIF_SIGPENDING; |
| beqi r11, 1f; /* Signals to handle, handle them */ |
| |
| /* |
| * Handle a signal return; Pending signals should be in r18. |
| * |
| * Not all registers are saved by the normal trap/interrupt entry |
| * points (for instance, call-saved registers (because the normal |
| * C-compiler calling sequence in the kernel makes sure they're |
| * preserved), and call-clobbered registers in the case of |
| * traps), but signal handlers may want to examine or change the |
| * complete register state. Here we save anything not saved by |
| * the normal entry sequence, so that it may be safely restored |
| * (in a possibly modified form) after do_signal returns. |
| * store return registers separately because this macros is use |
| * for others exceptions */ |
| swi r3, r1, PTO + PT_R3; |
| swi r4, r1, PTO + PT_R4; |
| la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ |
| add r6, r0, r0; /* Arg 2: sigset_t *oldset */ |
| addi r7, r0, 0; /* Arg 3: int in_syscall */ |
| bralid r15, do_signal; /* Handle any signals */ |
| nop; |
| lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| lwi r4, r1, PTO+PT_R4; |
| |
| /* Finally, return to user state. */ |
| 1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */ |
| add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */ |
| VM_OFF; |
| tophys(r1,r1); |
| |
| lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| lwi r4, r1, PTO+PT_R4; |
| RESTORE_REGS; |
| addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ |
| |
| lwi r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer. */ |
| bri 6f; |
| /* Return to kernel state. */ |
| 2: VM_OFF; |
| tophys(r1,r1); |
| lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| lwi r4, r1, PTO+PT_R4; |
| RESTORE_REGS; |
| addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ |
| |
| tovirt(r1,r1); |
| 6: |
| EXC_return: /* Make global symbol for debugging */ |
| rtbd r14, 0; /* Instructions to return from an IRQ */ |
| nop; |
| |
| /* |
| * HW EXCEPTION rutine end |
| */ |
| |
| /* |
| * Hardware maskable interrupts. |
| * |
| * The stack-pointer (r1) should have already been saved to the memory |
| * location PER_CPU(ENTRY_SP). |
| */ |
| C_ENTRY(_interrupt): |
| /* MS: we are in physical address */ |
| /* Save registers, switch to proper stack, convert SP to virtual.*/ |
| swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) |
| swi r11, r0, TOPHYS(PER_CPU(R11_SAVE)); |
| /* MS: See if already in kernel mode. */ |
| lwi r11, r0, TOPHYS(PER_CPU(KM)); |
| beqi r11, 1f; /* MS: Jump ahead if coming from user */ |
| |
| /* Kernel-mode state save. */ |
| or r11, r1, r0 |
| tophys(r1,r11); /* MS: I have in r1 physical address where stack is */ |
| /* MS: Save original SP - position PT_R1 to next stack frame 4 *1 - 152*/ |
| swi r11, r1, (PT_R1 - PT_SIZE); |
| /* MS: restore r11 because of saving in SAVE_REGS */ |
| lwi r11, r0, TOPHYS(PER_CPU(R11_SAVE)); |
| /* save registers */ |
| /* MS: Make room on the stack -> activation record */ |
| addik r1, r1, -STATE_SAVE_SIZE; |
| /* MS: store return registers separately because |
| * this macros is use for others exceptions */ |
| swi r3, r1, PTO + PT_R3; |
| swi r4, r1, PTO + PT_R4; |
| SAVE_REGS |
| /* MS: store mode */ |
| addi r11, r0, 1; /* MS: Was in kernel-mode. */ |
| swi r11, r1, PTO + PT_MODE; /* MS: and save it */ |
| brid 2f; |
| nop; /* MS: Fill delay slot */ |
| |
| 1: |
| /* User-mode state save. */ |
| /* MS: restore r11 -> FIXME move before SAVE_REG */ |
| lwi r11, r0, TOPHYS(PER_CPU(R11_SAVE)); |
| /* MS: get the saved current */ |
| lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); |
| tophys(r1,r1); |
| lwi r1, r1, TS_THREAD_INFO; |
| addik r1, r1, THREAD_SIZE; |
| tophys(r1,r1); |
| /* save registers */ |
| addik r1, r1, -STATE_SAVE_SIZE; |
| swi r3, r1, PTO+PT_R3; |
| swi r4, r1, PTO+PT_R4; |
| SAVE_REGS |
| /* calculate mode */ |
| swi r0, r1, PTO + PT_MODE; |
| lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); |
| swi r11, r1, PTO+PT_R1; |
| /* setup kernel mode to KM */ |
| addi r11, r0, 1; |
| swi r11, r0, TOPHYS(PER_CPU(KM)); |
| |
| 2: |
| lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); |
| swi r0, r1, PTO + PT_R0; |
| tovirt(r1,r1) |
| la r5, r1, PTO; |
| set_vms; |
| la r11, r0, do_IRQ; |
| la r15, r0, irq_call; |
| irq_call:rtbd r11, 0; |
| nop; |
| |
| /* MS: we are in virtual mode */ |
| ret_from_irq: |
| lwi r11, r1, PTO + PT_MODE; |
| bnei r11, 2f; |
| |
| add r11, r0, CURRENT_TASK; |
| lwi r11, r11, TS_THREAD_INFO; |
| lwi r11, r11, TI_FLAGS; /* MS: get flags from thread info */ |
| andi r11, r11, _TIF_NEED_RESCHED; |
| beqi r11, 5f |
| bralid r15, schedule; |
| nop; /* delay slot */ |
| |
| /* Maybe handle a signal */ |
| 5: add r11, r0, CURRENT_TASK; |
| lwi r11, r11, TS_THREAD_INFO; /* MS: get thread info */ |
| lwi r11, r11, TI_FLAGS; /* get flags in thread info */ |
| andi r11, r11, _TIF_SIGPENDING; |
| beqid r11, no_intr_resched |
| /* Handle a signal return; Pending signals should be in r18. */ |
| addi r7, r0, 0; /* Arg 3: int in_syscall */ |
| la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ |
| bralid r15, do_signal; /* Handle any signals */ |
| add r6, r0, r0; /* Arg 2: sigset_t *oldset */ |
| |
| /* Finally, return to user state. */ |
| no_intr_resched: |
| /* Disable interrupts, we are now committed to the state restore */ |
| disable_irq |
| swi r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */ |
| add r11, r0, CURRENT_TASK; |
| swi r11, r0, PER_CPU(CURRENT_SAVE); |
| VM_OFF; |
| tophys(r1,r1); |
| lwi r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */ |
| lwi r4, r1, PTO + PT_R4; |
| RESTORE_REGS |
| addik r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */ |
| lwi r1, r1, PT_R1 - PT_SIZE; |
| bri 6f; |
| /* MS: Return to kernel state. */ |
| 2: VM_OFF /* MS: turn off MMU */ |
| tophys(r1,r1) |
| lwi r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */ |
| lwi r4, r1, PTO + PT_R4; |
| RESTORE_REGS |
| addik r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */ |
| tovirt(r1,r1); |
| 6: |
| IRQ_return: /* MS: Make global symbol for debugging */ |
| rtid r14, 0 |
| nop |
| |
| /* |
| * `Debug' trap |
| * We enter dbtrap in "BIP" (breakpoint) mode. |
| * So we exit the breakpoint mode with an 'rtbd' and proceed with the |
| * original dbtrap. |
| * however, wait to save state first |
| */ |
| C_ENTRY(_debug_exception): |
| /* BIP bit is set on entry, no interrupts can occur */ |
| swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) |
| |
| swi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */ |
| set_bip; /*equalize initial state for all possible entries*/ |
| clear_eip; |
| enable_irq; |
| lwi r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/ |
| beqi r11, 1f; /* Jump ahead if coming from user */ |
| /* Kernel-mode state save. */ |
| lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/ |
| tophys(r1,r11); |
| swi r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */ |
| lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */ |
| |
| addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ |
| swi r3, r1, PTO + PT_R3; |
| swi r4, r1, PTO + PT_R4; |
| SAVE_REGS; |
| |
| addi r11, r0, 1; /* Was in kernel-mode. */ |
| swi r11, r1, PTO + PT_MODE; |
| brid 2f; |
| nop; /* Fill delay slot */ |
| 1: /* User-mode state save. */ |
| lwi r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */ |
| lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ |
| tophys(r1,r1); |
| lwi r1, r1, TS_THREAD_INFO; /* get the thread info */ |
| addik r1, r1, THREAD_SIZE; /* calculate kernel stack pointer */ |
| tophys(r1,r1); |
| |
| addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ |
| swi r3, r1, PTO + PT_R3; |
| swi r4, r1, PTO + PT_R4; |
| SAVE_REGS; |
| |
| swi r0, r1, PTO+PT_MODE; /* Was in user-mode. */ |
| lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); |
| swi r11, r1, PTO+PT_R1; /* Store user SP. */ |
| addi r11, r0, 1; |
| swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode. */ |
| 2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ |
| /* Save away the syscall number. */ |
| swi r0, r1, PTO+PT_R0; |
| tovirt(r1,r1) |
| |
| addi r5, r0, SIGTRAP /* send the trap signal */ |
| add r6, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| addk r7, r0, r0 /* 3rd param zero */ |
| |
| set_vms; |
| la r11, r0, send_sig; |
| la r15, r0, dbtrap_call; |
| dbtrap_call: rtbd r11, 0; |
| nop; |
| |
| set_bip; /* Ints masked for state restore*/ |
| lwi r11, r1, PTO+PT_MODE; |
| bnei r11, 2f; |
| |
| /* Get current task ptr into r11 */ |
| add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| lwi r11, r11, TS_THREAD_INFO; /* get thread info */ |
| lwi r11, r11, TI_FLAGS; /* get flags in thread info */ |
| andi r11, r11, _TIF_NEED_RESCHED; |
| beqi r11, 5f; |
| |
| /* Call the scheduler before returning from a syscall/trap. */ |
| |
| bralid r15, schedule; /* Call scheduler */ |
| nop; /* delay slot */ |
| /* XXX Is PT_DTRACE handling needed here? */ |
| /* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here. */ |
| |
| /* Maybe handle a signal */ |
| 5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| lwi r11, r11, TS_THREAD_INFO; /* get thread info */ |
| lwi r11, r11, TI_FLAGS; /* get flags in thread info */ |
| andi r11, r11, _TIF_SIGPENDING; |
| beqi r11, 1f; /* Signals to handle, handle them */ |
| |
| /* Handle a signal return; Pending signals should be in r18. */ |
| /* Not all registers are saved by the normal trap/interrupt entry |
| points (for instance, call-saved registers (because the normal |
| C-compiler calling sequence in the kernel makes sure they're |
| preserved), and call-clobbered registers in the case of |
| traps), but signal handlers may want to examine or change the |
| complete register state. Here we save anything not saved by |
| the normal entry sequence, so that it may be safely restored |
| (in a possibly modified form) after do_signal returns. */ |
| |
| la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ |
| add r6, r0, r0; /* Arg 2: sigset_t *oldset */ |
| addi r7, r0, 0; /* Arg 3: int in_syscall */ |
| bralid r15, do_signal; /* Handle any signals */ |
| nop; |
| |
| |
| /* Finally, return to user state. */ |
| 1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */ |
| add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ |
| swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */ |
| VM_OFF; |
| tophys(r1,r1); |
| |
| lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| lwi r4, r1, PTO+PT_R4; |
| RESTORE_REGS |
| addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ |
| |
| |
| lwi r1, r1, PT_R1 - PT_SIZE; |
| /* Restore user stack pointer. */ |
| bri 6f; |
| |
| /* Return to kernel state. */ |
| 2: VM_OFF; |
| tophys(r1,r1); |
| lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ |
| lwi r4, r1, PTO+PT_R4; |
| RESTORE_REGS |
| addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ |
| |
| tovirt(r1,r1); |
| 6: |
| DBTRAP_return: /* Make global symbol for debugging */ |
| rtbd r14, 0; /* Instructions to return from an IRQ */ |
| nop; |
| |
| |
| |
| ENTRY(_switch_to) |
| /* prepare return value */ |
| addk r3, r0, r31 |
| |
| /* save registers in cpu_context */ |
| /* use r11 and r12, volatile registers, as temp register */ |
| /* give start of cpu_context for previous process */ |
| addik r11, r5, TI_CPU_CONTEXT |
| swi r1, r11, CC_R1 |
| swi r2, r11, CC_R2 |
| /* skip volatile registers. |
| * they are saved on stack when we jumped to _switch_to() */ |
| /* dedicated registers */ |
| swi r13, r11, CC_R13 |
| swi r14, r11, CC_R14 |
| swi r15, r11, CC_R15 |
| swi r16, r11, CC_R16 |
| swi r17, r11, CC_R17 |
| swi r18, r11, CC_R18 |
| /* save non-volatile registers */ |
| swi r19, r11, CC_R19 |
| swi r20, r11, CC_R20 |
| swi r21, r11, CC_R21 |
| swi r22, r11, CC_R22 |
| swi r23, r11, CC_R23 |
| swi r24, r11, CC_R24 |
| swi r25, r11, CC_R25 |
| swi r26, r11, CC_R26 |
| swi r27, r11, CC_R27 |
| swi r28, r11, CC_R28 |
| swi r29, r11, CC_R29 |
| swi r30, r11, CC_R30 |
| /* special purpose registers */ |
| mfs r12, rmsr |
| nop |
| swi r12, r11, CC_MSR |
| mfs r12, rear |
| nop |
| swi r12, r11, CC_EAR |
| mfs r12, resr |
| nop |
| swi r12, r11, CC_ESR |
| mfs r12, rfsr |
| nop |
| swi r12, r11, CC_FSR |
| |
| /* update r31, the current */ |
| lwi r31, r6, TI_TASK/* give me pointer to task which will be next */ |
| /* stored it to current_save too */ |
| swi r31, r0, PER_CPU(CURRENT_SAVE) |
| |
| /* get new process' cpu context and restore */ |
| /* give me start where start context of next task */ |
| addik r11, r6, TI_CPU_CONTEXT |
| |
| /* non-volatile registers */ |
| lwi r30, r11, CC_R30 |
| lwi r29, r11, CC_R29 |
| lwi r28, r11, CC_R28 |
| lwi r27, r11, CC_R27 |
| lwi r26, r11, CC_R26 |
| lwi r25, r11, CC_R25 |
| lwi r24, r11, CC_R24 |
| lwi r23, r11, CC_R23 |
| lwi r22, r11, CC_R22 |
| lwi r21, r11, CC_R21 |
| lwi r20, r11, CC_R20 |
| lwi r19, r11, CC_R19 |
| /* dedicated registers */ |
| lwi r18, r11, CC_R18 |
| lwi r17, r11, CC_R17 |
| lwi r16, r11, CC_R16 |
| lwi r15, r11, CC_R15 |
| lwi r14, r11, CC_R14 |
| lwi r13, r11, CC_R13 |
| /* skip volatile registers */ |
| lwi r2, r11, CC_R2 |
| lwi r1, r11, CC_R1 |
| |
| /* special purpose registers */ |
| lwi r12, r11, CC_FSR |
| mts rfsr, r12 |
| nop |
| lwi r12, r11, CC_MSR |
| mts rmsr, r12 |
| nop |
| |
| rtsd r15, 8 |
| nop |
| |
| ENTRY(_reset) |
| brai 0x70; /* Jump back to FS-boot */ |
| |
| ENTRY(_break) |
| mfs r5, rmsr |
| nop |
| swi r5, r0, 0x250 + TOPHYS(r0_ram) |
| mfs r5, resr |
| nop |
| swi r5, r0, 0x254 + TOPHYS(r0_ram) |
| bri 0 |
| |
| /* These are compiled and loaded into high memory, then |
| * copied into place in mach_early_setup */ |
| .section .init.ivt, "ax" |
| .org 0x0 |
| /* this is very important - here is the reset vector */ |
| /* in current MMU branch you don't care what is here - it is |
| * used from bootloader site - but this is correct for FS-BOOT */ |
| brai 0x70 |
| nop |
| brai TOPHYS(_user_exception); /* syscall handler */ |
| brai TOPHYS(_interrupt); /* Interrupt handler */ |
| brai TOPHYS(_break); /* nmi trap handler */ |
| brai TOPHYS(_hw_exception_handler); /* HW exception handler */ |
| |
| .org 0x60 |
| brai TOPHYS(_debug_exception); /* debug trap handler*/ |
| |
| .section .rodata,"a" |
| #include "syscall_table.S" |
| |
| syscall_table_size=(.-sys_call_table) |
| |