| /* |
| |
| Broadcom BCM43xx wireless driver |
| |
| Transmission (TX/RX) related functions. |
| |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, |
| Stefano Brivio <st3@riseup.net> |
| Michael Buesch <mbuesch@freenet.de> |
| Danny van Dyk <kugelfang@gentoo.org> |
| Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include "bcm43xx_xmit.h" |
| |
| #include <linux/etherdevice.h> |
| |
| |
| /* Extract the bitrate out of a CCK PLCP header. */ |
| static u8 bcm43xx_plcp_get_bitrate_cck(struct bcm43xx_plcp_hdr4 *plcp) |
| { |
| switch (plcp->raw[0]) { |
| case 0x0A: |
| return IEEE80211_CCK_RATE_1MB; |
| case 0x14: |
| return IEEE80211_CCK_RATE_2MB; |
| case 0x37: |
| return IEEE80211_CCK_RATE_5MB; |
| case 0x6E: |
| return IEEE80211_CCK_RATE_11MB; |
| } |
| assert(0); |
| return 0; |
| } |
| |
| /* Extract the bitrate out of an OFDM PLCP header. */ |
| static u8 bcm43xx_plcp_get_bitrate_ofdm(struct bcm43xx_plcp_hdr4 *plcp) |
| { |
| switch (plcp->raw[0] & 0xF) { |
| case 0xB: |
| return IEEE80211_OFDM_RATE_6MB; |
| case 0xF: |
| return IEEE80211_OFDM_RATE_9MB; |
| case 0xA: |
| return IEEE80211_OFDM_RATE_12MB; |
| case 0xE: |
| return IEEE80211_OFDM_RATE_18MB; |
| case 0x9: |
| return IEEE80211_OFDM_RATE_24MB; |
| case 0xD: |
| return IEEE80211_OFDM_RATE_36MB; |
| case 0x8: |
| return IEEE80211_OFDM_RATE_48MB; |
| case 0xC: |
| return IEEE80211_OFDM_RATE_54MB; |
| } |
| assert(0); |
| return 0; |
| } |
| |
| u8 bcm43xx_plcp_get_ratecode_cck(const u8 bitrate) |
| { |
| switch (bitrate) { |
| case IEEE80211_CCK_RATE_1MB: |
| return 0x0A; |
| case IEEE80211_CCK_RATE_2MB: |
| return 0x14; |
| case IEEE80211_CCK_RATE_5MB: |
| return 0x37; |
| case IEEE80211_CCK_RATE_11MB: |
| return 0x6E; |
| } |
| assert(0); |
| return 0; |
| } |
| |
| u8 bcm43xx_plcp_get_ratecode_ofdm(const u8 bitrate) |
| { |
| switch (bitrate) { |
| case IEEE80211_OFDM_RATE_6MB: |
| return 0xB; |
| case IEEE80211_OFDM_RATE_9MB: |
| return 0xF; |
| case IEEE80211_OFDM_RATE_12MB: |
| return 0xA; |
| case IEEE80211_OFDM_RATE_18MB: |
| return 0xE; |
| case IEEE80211_OFDM_RATE_24MB: |
| return 0x9; |
| case IEEE80211_OFDM_RATE_36MB: |
| return 0xD; |
| case IEEE80211_OFDM_RATE_48MB: |
| return 0x8; |
| case IEEE80211_OFDM_RATE_54MB: |
| return 0xC; |
| } |
| assert(0); |
| return 0; |
| } |
| |
| static void bcm43xx_generate_plcp_hdr(struct bcm43xx_plcp_hdr4 *plcp, |
| const u16 octets, const u8 bitrate, |
| const int ofdm_modulation) |
| { |
| __le32 *data = &(plcp->data); |
| __u8 *raw = plcp->raw; |
| |
| if (ofdm_modulation) { |
| *data = bcm43xx_plcp_get_ratecode_ofdm(bitrate); |
| assert(!(octets & 0xF000)); |
| *data |= (octets << 5); |
| *data = cpu_to_le32(*data); |
| } else { |
| u32 plen; |
| |
| plen = octets * 16 / bitrate; |
| if ((octets * 16 % bitrate) > 0) { |
| plen++; |
| if ((bitrate == IEEE80211_CCK_RATE_11MB) |
| && ((octets * 8 % 11) < 4)) { |
| raw[1] = 0x84; |
| } else |
| raw[1] = 0x04; |
| } else |
| raw[1] = 0x04; |
| *data |= cpu_to_le32(plen << 16); |
| raw[0] = bcm43xx_plcp_get_ratecode_cck(bitrate); |
| } |
| } |
| |
| static u8 bcm43xx_calc_fallback_rate(u8 bitrate) |
| { |
| switch (bitrate) { |
| case IEEE80211_CCK_RATE_1MB: |
| return IEEE80211_CCK_RATE_1MB; |
| case IEEE80211_CCK_RATE_2MB: |
| return IEEE80211_CCK_RATE_1MB; |
| case IEEE80211_CCK_RATE_5MB: |
| return IEEE80211_CCK_RATE_2MB; |
| case IEEE80211_CCK_RATE_11MB: |
| return IEEE80211_CCK_RATE_5MB; |
| case IEEE80211_OFDM_RATE_6MB: |
| return IEEE80211_CCK_RATE_5MB; |
| case IEEE80211_OFDM_RATE_9MB: |
| return IEEE80211_OFDM_RATE_6MB; |
| case IEEE80211_OFDM_RATE_12MB: |
| return IEEE80211_OFDM_RATE_9MB; |
| case IEEE80211_OFDM_RATE_18MB: |
| return IEEE80211_OFDM_RATE_12MB; |
| case IEEE80211_OFDM_RATE_24MB: |
| return IEEE80211_OFDM_RATE_18MB; |
| case IEEE80211_OFDM_RATE_36MB: |
| return IEEE80211_OFDM_RATE_24MB; |
| case IEEE80211_OFDM_RATE_48MB: |
| return IEEE80211_OFDM_RATE_36MB; |
| case IEEE80211_OFDM_RATE_54MB: |
| return IEEE80211_OFDM_RATE_48MB; |
| } |
| assert(0); |
| return 0; |
| } |
| |
| static |
| __le16 bcm43xx_calc_duration_id(const struct ieee80211_hdr *wireless_header, |
| u8 bitrate) |
| { |
| const u16 frame_ctl = le16_to_cpu(wireless_header->frame_ctl); |
| __le16 duration_id = wireless_header->duration_id; |
| |
| switch (WLAN_FC_GET_TYPE(frame_ctl)) { |
| case IEEE80211_FTYPE_DATA: |
| case IEEE80211_FTYPE_MGMT: |
| //TODO: Steal the code from ieee80211, once it is completed there. |
| break; |
| case IEEE80211_FTYPE_CTL: |
| /* Use the original duration/id. */ |
| break; |
| default: |
| assert(0); |
| } |
| |
| return duration_id; |
| } |
| |
| static inline |
| u16 ceiling_div(u16 dividend, u16 divisor) |
| { |
| return ((dividend + divisor - 1) / divisor); |
| } |
| |
| static void bcm43xx_generate_rts(const struct bcm43xx_phyinfo *phy, |
| struct bcm43xx_txhdr *txhdr, |
| u16 *flags, |
| u8 bitrate, |
| const struct ieee80211_hdr_4addr *wlhdr) |
| { |
| u16 fctl; |
| u16 dur; |
| u8 fallback_bitrate; |
| int ofdm_modulation; |
| int fallback_ofdm_modulation; |
| // u8 *sa, *da; |
| u16 flen; |
| |
| //FIXME sa = ieee80211_get_SA((struct ieee80211_hdr *)wlhdr); |
| //FIXME da = ieee80211_get_DA((struct ieee80211_hdr *)wlhdr); |
| fallback_bitrate = bcm43xx_calc_fallback_rate(bitrate); |
| ofdm_modulation = !(ieee80211_is_cck_rate(bitrate)); |
| fallback_ofdm_modulation = !(ieee80211_is_cck_rate(fallback_bitrate)); |
| |
| flen = sizeof(u16) + sizeof(u16) + ETH_ALEN + ETH_ALEN + IEEE80211_FCS_LEN, |
| bcm43xx_generate_plcp_hdr((struct bcm43xx_plcp_hdr4 *)(&txhdr->rts_cts_plcp), |
| flen, bitrate, |
| !ieee80211_is_cck_rate(bitrate)); |
| bcm43xx_generate_plcp_hdr((struct bcm43xx_plcp_hdr4 *)(&txhdr->rts_cts_fallback_plcp), |
| flen, fallback_bitrate, |
| !ieee80211_is_cck_rate(fallback_bitrate)); |
| fctl = IEEE80211_FTYPE_CTL; |
| fctl |= IEEE80211_STYPE_RTS; |
| dur = le16_to_cpu(wlhdr->duration_id); |
| /*FIXME: should we test for dur==0 here and let it unmodified in this case? |
| * The following assert checks for this case... |
| */ |
| assert(dur); |
| /*FIXME: The duration calculation is not really correct. |
| * I am not 100% sure which bitrate to use. We use the RTS rate here, |
| * but this is likely to be wrong. |
| */ |
| if (phy->type == BCM43xx_PHYTYPE_A) { |
| /* Three times SIFS */ |
| dur += 16 * 3; |
| /* Add ACK duration. */ |
| dur += ceiling_div((16 + 8 * (14 /*bytes*/) + 6) * 10, |
| bitrate * 4); |
| /* Add CTS duration. */ |
| dur += ceiling_div((16 + 8 * (14 /*bytes*/) + 6) * 10, |
| bitrate * 4); |
| } else { |
| /* Three times SIFS */ |
| dur += 10 * 3; |
| /* Add ACK duration. */ |
| dur += ceiling_div(8 * (14 /*bytes*/) * 10, |
| bitrate); |
| /* Add CTS duration. */ |
| dur += ceiling_div(8 * (14 /*bytes*/) * 10, |
| bitrate); |
| } |
| |
| txhdr->rts_cts_frame_control = cpu_to_le16(fctl); |
| txhdr->rts_cts_dur = cpu_to_le16(dur); |
| //printk(BCM43xx_MACFMT " " BCM43xx_MACFMT " " BCM43xx_MACFMT "\n", BCM43xx_MACARG(wlhdr->addr1), BCM43xx_MACARG(wlhdr->addr2), BCM43xx_MACARG(wlhdr->addr3)); |
| //printk(BCM43xx_MACFMT " " BCM43xx_MACFMT "\n", BCM43xx_MACARG(sa), BCM43xx_MACARG(da)); |
| memcpy(txhdr->rts_cts_mac1, wlhdr->addr1, ETH_ALEN);//FIXME! |
| // memcpy(txhdr->rts_cts_mac2, sa, ETH_ALEN); |
| |
| *flags |= BCM43xx_TXHDRFLAG_RTSCTS; |
| *flags |= BCM43xx_TXHDRFLAG_RTS; |
| if (ofdm_modulation) |
| *flags |= BCM43xx_TXHDRFLAG_RTSCTS_OFDM; |
| if (fallback_ofdm_modulation) |
| *flags |= BCM43xx_TXHDRFLAG_RTSCTSFALLBACK_OFDM; |
| } |
| |
| void bcm43xx_generate_txhdr(struct bcm43xx_private *bcm, |
| struct bcm43xx_txhdr *txhdr, |
| const unsigned char *fragment_data, |
| const unsigned int fragment_len, |
| const int is_first_fragment, |
| const u16 cookie) |
| { |
| const struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| const struct ieee80211_hdr_4addr *wireless_header = (const struct ieee80211_hdr_4addr *)fragment_data; |
| const struct ieee80211_security *secinfo = &bcm->ieee->sec; |
| u8 bitrate; |
| u8 fallback_bitrate; |
| int ofdm_modulation; |
| int fallback_ofdm_modulation; |
| u16 plcp_fragment_len = fragment_len; |
| u16 flags = 0; |
| u16 control = 0; |
| u16 wsec_rate = 0; |
| u16 encrypt_frame; |
| const u16 ftype = WLAN_FC_GET_TYPE(le16_to_cpu(wireless_header->frame_ctl)); |
| const int is_mgt = (ftype == IEEE80211_FTYPE_MGMT); |
| |
| /* Now construct the TX header. */ |
| memset(txhdr, 0, sizeof(*txhdr)); |
| |
| bitrate = ieee80211softmac_suggest_txrate(bcm->softmac, |
| is_multicast_ether_addr(wireless_header->addr1), is_mgt); |
| ofdm_modulation = !(ieee80211_is_cck_rate(bitrate)); |
| fallback_bitrate = bcm43xx_calc_fallback_rate(bitrate); |
| fallback_ofdm_modulation = !(ieee80211_is_cck_rate(fallback_bitrate)); |
| |
| /* Set Frame Control from 80211 header. */ |
| txhdr->frame_control = wireless_header->frame_ctl; |
| /* Copy address1 from 80211 header. */ |
| memcpy(txhdr->mac1, wireless_header->addr1, 6); |
| /* Set the fallback duration ID. */ |
| txhdr->fallback_dur_id = bcm43xx_calc_duration_id((const struct ieee80211_hdr *)wireless_header, |
| fallback_bitrate); |
| /* Set the cookie (used as driver internal ID for the frame) */ |
| txhdr->cookie = cpu_to_le16(cookie); |
| |
| /* Hardware appends FCS. */ |
| plcp_fragment_len += IEEE80211_FCS_LEN; |
| |
| /* Hardware encryption. */ |
| encrypt_frame = le16_to_cpup(&wireless_header->frame_ctl) & IEEE80211_FCTL_PROTECTED; |
| if (encrypt_frame && !bcm->ieee->host_encrypt) { |
| const struct ieee80211_hdr_3addr *hdr = (struct ieee80211_hdr_3addr *)wireless_header; |
| memcpy(txhdr->wep_iv, hdr->payload, 4); |
| /* Hardware appends ICV. */ |
| plcp_fragment_len += 4; |
| |
| wsec_rate |= (bcm->key[secinfo->active_key].algorithm << BCM43xx_TXHDR_WSEC_ALGO_SHIFT) |
| & BCM43xx_TXHDR_WSEC_ALGO_MASK; |
| wsec_rate |= (secinfo->active_key << BCM43xx_TXHDR_WSEC_KEYINDEX_SHIFT) |
| & BCM43xx_TXHDR_WSEC_KEYINDEX_MASK; |
| } |
| |
| /* Generate the PLCP header and the fallback PLCP header. */ |
| bcm43xx_generate_plcp_hdr((struct bcm43xx_plcp_hdr4 *)(&txhdr->plcp), |
| plcp_fragment_len, |
| bitrate, ofdm_modulation); |
| bcm43xx_generate_plcp_hdr(&txhdr->fallback_plcp, plcp_fragment_len, |
| fallback_bitrate, fallback_ofdm_modulation); |
| |
| /* Set the CONTROL field */ |
| if (ofdm_modulation) |
| control |= BCM43xx_TXHDRCTL_OFDM; |
| if (bcm->short_preamble) //FIXME: could be the other way around, please test |
| control |= BCM43xx_TXHDRCTL_SHORT_PREAMBLE; |
| control |= (phy->antenna_diversity << BCM43xx_TXHDRCTL_ANTENNADIV_SHIFT) |
| & BCM43xx_TXHDRCTL_ANTENNADIV_MASK; |
| |
| /* Set the FLAGS field */ |
| if (!is_multicast_ether_addr(wireless_header->addr1) && |
| !is_broadcast_ether_addr(wireless_header->addr1)) |
| flags |= BCM43xx_TXHDRFLAG_EXPECTACK; |
| if (1 /* FIXME: PS poll?? */) |
| flags |= 0x10; // FIXME: unknown meaning. |
| if (fallback_ofdm_modulation) |
| flags |= BCM43xx_TXHDRFLAG_FALLBACKOFDM; |
| if (is_first_fragment) |
| flags |= BCM43xx_TXHDRFLAG_FIRSTFRAGMENT; |
| |
| /* Set WSEC/RATE field */ |
| wsec_rate |= (txhdr->plcp.raw[0] << BCM43xx_TXHDR_RATE_SHIFT) |
| & BCM43xx_TXHDR_RATE_MASK; |
| |
| /* Generate the RTS/CTS packet, if required. */ |
| /* FIXME: We should first try with CTS-to-self, |
| * if we are on 80211g. If we get too many |
| * failures (hidden nodes), we should switch back to RTS/CTS. |
| */ |
| if (0/*FIXME txctl->use_rts_cts*/) { |
| bcm43xx_generate_rts(phy, txhdr, &flags, |
| 0/*FIXME txctl->rts_cts_rate*/, |
| wireless_header); |
| } |
| |
| txhdr->flags = cpu_to_le16(flags); |
| txhdr->control = cpu_to_le16(control); |
| txhdr->wsec_rate = cpu_to_le16(wsec_rate); |
| } |
| |
| static s8 bcm43xx_rssi_postprocess(struct bcm43xx_private *bcm, |
| u8 in_rssi, int ofdm, |
| int adjust_2053, int adjust_2050) |
| { |
| struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| s32 tmp; |
| |
| switch (radio->version) { |
| case 0x2050: |
| if (ofdm) { |
| tmp = in_rssi; |
| if (tmp > 127) |
| tmp -= 256; |
| tmp *= 73; |
| tmp /= 64; |
| if (adjust_2050) |
| tmp += 25; |
| else |
| tmp -= 3; |
| } else { |
| if (bcm->sprom.boardflags & BCM43xx_BFL_RSSI) { |
| if (in_rssi > 63) |
| in_rssi = 63; |
| tmp = radio->nrssi_lt[in_rssi]; |
| tmp = 31 - tmp; |
| tmp *= -131; |
| tmp /= 128; |
| tmp -= 57; |
| } else { |
| tmp = in_rssi; |
| tmp = 31 - tmp; |
| tmp *= -149; |
| tmp /= 128; |
| tmp -= 68; |
| } |
| if (phy->type == BCM43xx_PHYTYPE_G && |
| adjust_2050) |
| tmp += 25; |
| } |
| break; |
| case 0x2060: |
| if (in_rssi > 127) |
| tmp = in_rssi - 256; |
| else |
| tmp = in_rssi; |
| break; |
| default: |
| tmp = in_rssi; |
| tmp -= 11; |
| tmp *= 103; |
| tmp /= 64; |
| if (adjust_2053) |
| tmp -= 109; |
| else |
| tmp -= 83; |
| } |
| |
| return (s8)tmp; |
| } |
| |
| //TODO |
| #if 0 |
| static s8 bcm43xx_rssinoise_postprocess(struct bcm43xx_private *bcm, |
| u8 in_rssi) |
| { |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| s8 ret; |
| |
| if (phy->type == BCM43xx_PHYTYPE_A) { |
| //TODO: Incomplete specs. |
| ret = 0; |
| } else |
| ret = bcm43xx_rssi_postprocess(bcm, in_rssi, 0, 1, 1); |
| |
| return ret; |
| } |
| #endif |
| |
| int bcm43xx_rx(struct bcm43xx_private *bcm, |
| struct sk_buff *skb, |
| struct bcm43xx_rxhdr *rxhdr) |
| { |
| struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm); |
| struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm); |
| struct bcm43xx_plcp_hdr4 *plcp; |
| struct ieee80211_rx_stats stats; |
| struct ieee80211_hdr_4addr *wlhdr; |
| u16 frame_ctl; |
| int is_packet_for_us = 0; |
| int err = -EINVAL; |
| const u16 rxflags1 = le16_to_cpu(rxhdr->flags1); |
| const u16 rxflags2 = le16_to_cpu(rxhdr->flags2); |
| const u16 rxflags3 = le16_to_cpu(rxhdr->flags3); |
| const int is_ofdm = !!(rxflags1 & BCM43xx_RXHDR_FLAGS1_OFDM); |
| |
| if (rxflags2 & BCM43xx_RXHDR_FLAGS2_TYPE2FRAME) { |
| plcp = (struct bcm43xx_plcp_hdr4 *)(skb->data + 2); |
| /* Skip two unknown bytes and the PLCP header. */ |
| skb_pull(skb, 2 + sizeof(struct bcm43xx_plcp_hdr6)); |
| } else { |
| plcp = (struct bcm43xx_plcp_hdr4 *)(skb->data); |
| /* Skip the PLCP header. */ |
| skb_pull(skb, sizeof(struct bcm43xx_plcp_hdr6)); |
| } |
| /* The SKB contains the PAYLOAD (wireless header + data) |
| * at this point. The FCS at the end is stripped. |
| */ |
| |
| memset(&stats, 0, sizeof(stats)); |
| stats.mac_time = le16_to_cpu(rxhdr->mactime); |
| stats.rssi = rxhdr->rssi; |
| stats.signal = bcm43xx_rssi_postprocess(bcm, rxhdr->rssi, is_ofdm, |
| !!(rxflags1 & BCM43xx_RXHDR_FLAGS1_2053RSSIADJ), |
| !!(rxflags3 & BCM43xx_RXHDR_FLAGS3_2050RSSIADJ)); |
| //TODO stats.noise = |
| if (is_ofdm) |
| stats.rate = bcm43xx_plcp_get_bitrate_ofdm(plcp); |
| else |
| stats.rate = bcm43xx_plcp_get_bitrate_cck(plcp); |
| stats.received_channel = radio->channel; |
| //TODO stats.control = |
| stats.mask = IEEE80211_STATMASK_SIGNAL | |
| //TODO IEEE80211_STATMASK_NOISE | |
| IEEE80211_STATMASK_RATE | |
| IEEE80211_STATMASK_RSSI; |
| if (phy->type == BCM43xx_PHYTYPE_A) |
| stats.freq = IEEE80211_52GHZ_BAND; |
| else |
| stats.freq = IEEE80211_24GHZ_BAND; |
| stats.len = skb->len; |
| |
| bcm->stats.last_rx = jiffies; |
| if (bcm->ieee->iw_mode == IW_MODE_MONITOR) { |
| err = ieee80211_rx(bcm->ieee, skb, &stats); |
| return (err == 0) ? -EINVAL : 0; |
| } |
| |
| wlhdr = (struct ieee80211_hdr_4addr *)(skb->data); |
| |
| switch (bcm->ieee->iw_mode) { |
| case IW_MODE_ADHOC: |
| if (memcmp(wlhdr->addr1, bcm->net_dev->dev_addr, ETH_ALEN) == 0 || |
| memcmp(wlhdr->addr3, bcm->ieee->bssid, ETH_ALEN) == 0 || |
| is_broadcast_ether_addr(wlhdr->addr1) || |
| is_multicast_ether_addr(wlhdr->addr1) || |
| bcm->net_dev->flags & IFF_PROMISC) |
| is_packet_for_us = 1; |
| break; |
| case IW_MODE_INFRA: |
| default: |
| /* When receiving multicast or broadcast packets, filter out |
| the packets we send ourself; we shouldn't see those */ |
| if (memcmp(wlhdr->addr3, bcm->ieee->bssid, ETH_ALEN) == 0 || |
| memcmp(wlhdr->addr1, bcm->net_dev->dev_addr, ETH_ALEN) == 0 || |
| (memcmp(wlhdr->addr3, bcm->net_dev->dev_addr, ETH_ALEN) && |
| (is_broadcast_ether_addr(wlhdr->addr1) || |
| is_multicast_ether_addr(wlhdr->addr1) || |
| bcm->net_dev->flags & IFF_PROMISC))) |
| is_packet_for_us = 1; |
| break; |
| } |
| |
| frame_ctl = le16_to_cpu(wlhdr->frame_ctl); |
| if ((frame_ctl & IEEE80211_FCTL_PROTECTED) && !bcm->ieee->host_decrypt) { |
| frame_ctl &= ~IEEE80211_FCTL_PROTECTED; |
| wlhdr->frame_ctl = cpu_to_le16(frame_ctl); |
| /* trim IV and ICV */ |
| /* FIXME: this must be done only for WEP encrypted packets */ |
| if (skb->len < 32) { |
| dprintkl(KERN_ERR PFX "RX packet dropped (PROTECTED flag " |
| "set and length < 32)\n"); |
| return -EINVAL; |
| } else { |
| memmove(skb->data + 4, skb->data, 24); |
| skb_pull(skb, 4); |
| skb_trim(skb, skb->len - 4); |
| stats.len -= 8; |
| } |
| wlhdr = (struct ieee80211_hdr_4addr *)(skb->data); |
| } |
| |
| switch (WLAN_FC_GET_TYPE(frame_ctl)) { |
| case IEEE80211_FTYPE_MGMT: |
| ieee80211_rx_mgt(bcm->ieee, wlhdr, &stats); |
| break; |
| case IEEE80211_FTYPE_DATA: |
| if (is_packet_for_us) { |
| err = ieee80211_rx(bcm->ieee, skb, &stats); |
| err = (err == 0) ? -EINVAL : 0; |
| } |
| break; |
| case IEEE80211_FTYPE_CTL: |
| break; |
| default: |
| assert(0); |
| return -EINVAL; |
| } |
| |
| return err; |
| } |