| /* |
| * Copyright 2016 IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/irq.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/cpu.h> |
| #include <linux/of.h> |
| |
| #include <asm/smp.h> |
| #include <asm/irq.h> |
| #include <asm/errno.h> |
| #include <asm/xics.h> |
| #include <asm/io.h> |
| #include <asm/opal.h> |
| #include <asm/kvm_ppc.h> |
| |
| static void icp_opal_teardown_cpu(void) |
| { |
| int hw_cpu = hard_smp_processor_id(); |
| |
| /* Clear any pending IPI */ |
| opal_int_set_mfrr(hw_cpu, 0xff); |
| } |
| |
| static void icp_opal_flush_ipi(void) |
| { |
| /* |
| * We take the ipi irq but and never return so we need to EOI the IPI, |
| * but want to leave our priority 0. |
| * |
| * Should we check all the other interrupts too? |
| * Should we be flagging idle loop instead? |
| * Or creating some task to be scheduled? |
| */ |
| if (opal_int_eoi((0x00 << 24) | XICS_IPI) > 0) |
| force_external_irq_replay(); |
| } |
| |
| static unsigned int icp_opal_get_xirr(void) |
| { |
| unsigned int kvm_xirr; |
| __be32 hw_xirr; |
| int64_t rc; |
| |
| /* Handle an interrupt latched by KVM first */ |
| kvm_xirr = kvmppc_get_xics_latch(); |
| if (kvm_xirr) |
| return kvm_xirr; |
| |
| /* Then ask OPAL */ |
| rc = opal_int_get_xirr(&hw_xirr, false); |
| if (rc < 0) |
| return 0; |
| return be32_to_cpu(hw_xirr); |
| } |
| |
| static unsigned int icp_opal_get_irq(void) |
| { |
| unsigned int xirr; |
| unsigned int vec; |
| unsigned int irq; |
| |
| xirr = icp_opal_get_xirr(); |
| vec = xirr & 0x00ffffff; |
| if (vec == XICS_IRQ_SPURIOUS) |
| return 0; |
| |
| irq = irq_find_mapping(xics_host, vec); |
| if (likely(irq)) { |
| xics_push_cppr(vec); |
| return irq; |
| } |
| |
| /* We don't have a linux mapping, so have rtas mask it. */ |
| xics_mask_unknown_vec(vec); |
| |
| /* We might learn about it later, so EOI it */ |
| if (opal_int_eoi(xirr) > 0) |
| force_external_irq_replay(); |
| |
| return 0; |
| } |
| |
| static void icp_opal_set_cpu_priority(unsigned char cppr) |
| { |
| /* |
| * Here be dragons. The caller has asked to allow only IPI's and not |
| * external interrupts. But OPAL XIVE doesn't support that. So instead |
| * of allowing no interrupts allow all. That's still not right, but |
| * currently the only caller who does this is xics_migrate_irqs_away() |
| * and it works in that case. |
| */ |
| if (cppr >= DEFAULT_PRIORITY) |
| cppr = LOWEST_PRIORITY; |
| |
| xics_set_base_cppr(cppr); |
| opal_int_set_cppr(cppr); |
| iosync(); |
| } |
| |
| static void icp_opal_eoi(struct irq_data *d) |
| { |
| unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d); |
| int64_t rc; |
| |
| iosync(); |
| rc = opal_int_eoi((xics_pop_cppr() << 24) | hw_irq); |
| |
| /* |
| * EOI tells us whether there are more interrupts to fetch. |
| * |
| * Some HW implementations might not be able to send us another |
| * external interrupt in that case, so we force a replay. |
| */ |
| if (rc > 0) |
| force_external_irq_replay(); |
| } |
| |
| #ifdef CONFIG_SMP |
| |
| static void icp_opal_cause_ipi(int cpu) |
| { |
| int hw_cpu = get_hard_smp_processor_id(cpu); |
| |
| kvmppc_set_host_ipi(cpu, 1); |
| opal_int_set_mfrr(hw_cpu, IPI_PRIORITY); |
| } |
| |
| static irqreturn_t icp_opal_ipi_action(int irq, void *dev_id) |
| { |
| int cpu = smp_processor_id(); |
| |
| kvmppc_set_host_ipi(cpu, 0); |
| opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff); |
| |
| return smp_ipi_demux(); |
| } |
| |
| /* |
| * Called when an interrupt is received on an off-line CPU to |
| * clear the interrupt, so that the CPU can go back to nap mode. |
| */ |
| void icp_opal_flush_interrupt(void) |
| { |
| unsigned int xirr; |
| unsigned int vec; |
| |
| do { |
| xirr = icp_opal_get_xirr(); |
| vec = xirr & 0x00ffffff; |
| if (vec == XICS_IRQ_SPURIOUS) |
| break; |
| if (vec == XICS_IPI) { |
| /* Clear pending IPI */ |
| int cpu = smp_processor_id(); |
| kvmppc_set_host_ipi(cpu, 0); |
| opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff); |
| } else { |
| pr_err("XICS: hw interrupt 0x%x to offline cpu, " |
| "disabling\n", vec); |
| xics_mask_unknown_vec(vec); |
| } |
| |
| /* EOI the interrupt */ |
| } while (opal_int_eoi(xirr) > 0); |
| } |
| |
| #endif /* CONFIG_SMP */ |
| |
| static const struct icp_ops icp_opal_ops = { |
| .get_irq = icp_opal_get_irq, |
| .eoi = icp_opal_eoi, |
| .set_priority = icp_opal_set_cpu_priority, |
| .teardown_cpu = icp_opal_teardown_cpu, |
| .flush_ipi = icp_opal_flush_ipi, |
| #ifdef CONFIG_SMP |
| .ipi_action = icp_opal_ipi_action, |
| .cause_ipi = icp_opal_cause_ipi, |
| #endif |
| }; |
| |
| int icp_opal_init(void) |
| { |
| struct device_node *np; |
| |
| np = of_find_compatible_node(NULL, NULL, "ibm,opal-intc"); |
| if (!np) |
| return -ENODEV; |
| |
| icp_ops = &icp_opal_ops; |
| |
| printk("XICS: Using OPAL ICP fallbacks\n"); |
| |
| of_node_put(np); |
| return 0; |
| } |
| |