arch/arm/mach-orion5x/db88f5281-setup.c - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 /*
  * arch/arm/mach-orion5x/db88f5281-setup.c
  *
  * Marvell Orion-2 Development Board Setup
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/timer.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 #include "orion5x.h"

 /*****************************************************************************
  * DB-88F5281 on board devices
  ****************************************************************************/

 /*
  * 512K NOR flash Device bus boot chip select
  */

 #define DB88F5281_NOR_BOOT_BASE		0xf4000000
 #define DB88F5281_NOR_BOOT_SIZE		SZ_512K

 /*
  * 7-Segment on Device bus chip select 0
  */

 #define DB88F5281_7SEG_BASE		0xfa000000
 #define DB88F5281_7SEG_SIZE		SZ_1K

 /*
  * 32M NOR flash on Device bus chip select 1
  */

 #define DB88F5281_NOR_BASE		0xfc000000
 #define DB88F5281_NOR_SIZE		SZ_32M

 /*
  * 32M NAND flash on Device bus chip select 2
  */

 #define DB88F5281_NAND_BASE		0xfa800000
 #define DB88F5281_NAND_SIZE		SZ_1K

 /*
  * PCI
  */

 #define DB88F5281_PCI_SLOT0_OFFS		7
 #define DB88F5281_PCI_SLOT0_IRQ_PIN		12
 #define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN	13

 /*****************************************************************************
  * 512M NOR Flash on Device bus Boot CS
  ****************************************************************************/

 static struct physmap_flash_data db88f5281_boot_flash_data = {
 	.width		= 1,	/* 8 bit bus width */
 };

 static struct resource db88f5281_boot_flash_resource = {
 	.flags		= IORESOURCE_MEM,
 	.start		= DB88F5281_NOR_BOOT_BASE,
 	.end		= DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
 };

 static struct platform_device db88f5281_boot_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &db88f5281_boot_flash_data,
 	},
 	.num_resources	= 1,
 	.resource	= &db88f5281_boot_flash_resource,
 };

 /*****************************************************************************
  * 32M NOR Flash on Device bus CS1
  ****************************************************************************/

 static struct physmap_flash_data db88f5281_nor_flash_data = {
 	.width		= 4,	/* 32 bit bus width */
 };

 static struct resource db88f5281_nor_flash_resource = {
 	.flags		= IORESOURCE_MEM,
 	.start		= DB88F5281_NOR_BASE,
 	.end		= DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
 };

 static struct platform_device db88f5281_nor_flash = {
 	.name		= "physmap-flash",
 	.id		= 1,
 	.dev		= {
 		.platform_data	= &db88f5281_nor_flash_data,
 	},
 	.num_resources	= 1,
 	.resource	= &db88f5281_nor_flash_resource,
 };

 /*****************************************************************************
  * 32M NAND Flash on Device bus CS2
  ****************************************************************************/

 static struct mtd_partition db88f5281_nand_parts[] = {
 	{
 		.name = "kernel",
 		.offset = 0,
 		.size = SZ_2M,
 	}, {
 		.name = "root",
 		.offset = SZ_2M,
 		.size = (SZ_16M - SZ_2M),
 	}, {
 		.name = "user",
 		.offset = SZ_16M,
 		.size = SZ_8M,
 	}, {
 		.name = "recovery",
 		.offset = (SZ_16M + SZ_8M),
 		.size = SZ_8M,
 	},
 };

 static struct resource db88f5281_nand_resource = {
 	.flags		= IORESOURCE_MEM,
 	.start		= DB88F5281_NAND_BASE,
 	.end		= DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
 };

 static struct orion_nand_data db88f5281_nand_data = {
 	.parts		= db88f5281_nand_parts,
 	.nr_parts	= ARRAY_SIZE(db88f5281_nand_parts),
 	.cle		= 0,
 	.ale		= 1,
 	.width		= 8,
 };

 static struct platform_device db88f5281_nand_flash = {
 	.name		= "orion_nand",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &db88f5281_nand_data,
 	},
 	.resource	= &db88f5281_nand_resource,
 	.num_resources	= 1,
 };

 /*****************************************************************************
  * 7-Segment on Device bus CS0
  * Dummy counter every 2 sec
  ****************************************************************************/

 static void __iomem *db88f5281_7seg;
 static struct timer_list db88f5281_timer;

 static void db88f5281_7seg_event(unsigned long data)
 {
 	static int count = 0;
 	writel(0, db88f5281_7seg + (count << 4));
 	count = (count + 1) & 7;
 	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
 }

 static int __init db88f5281_7seg_init(void)
 {
 	if (machine_is_db88f5281()) {
 		db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
 					DB88F5281_7SEG_SIZE);
 		if (!db88f5281_7seg) {
 			printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
 			return -EIO;
 		}
 		setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
 		mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
 	}

 	return 0;
 }

 __initcall(db88f5281_7seg_init);

 /*****************************************************************************
  * PCI
  ****************************************************************************/

 static void __init db88f5281_pci_preinit(void)
 {
 	int pin;

 	/*
 	 * Configure PCI GPIO IRQ pins
 	 */
 	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
 			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
 			gpio_free(pin);
 		}
 	} else {
 		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
 	}

 	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
 			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);
 			gpio_free(pin);
 		}
 	} else {
 		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
 	}
 }

 static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
 	int irq;

 	/*
 	 * Check for devices with hard-wired IRQs.
 	 */
 	irq = orion5x_pci_map_irq(dev, slot, pin);
 	if (irq != -1)
 		return irq;

 	/*
 	 * PCI IRQs are connected via GPIOs.
 	 */
 	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
 	case 0:
 		return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
 	case 1:
 	case 2:
 		return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
 	default:
 		return -1;
 	}
 }

 static struct hw_pci db88f5281_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= db88f5281_pci_preinit,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= db88f5281_pci_map_irq,
 };

 static int __init db88f5281_pci_init(void)
 {
 	if (machine_is_db88f5281())
 		pci_common_init(&db88f5281_pci);

 	return 0;
 }

 subsys_initcall(db88f5281_pci_init);

 /*****************************************************************************
  * Ethernet
  ****************************************************************************/
 static struct mv643xx_eth_platform_data db88f5281_eth_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };

 /*****************************************************************************
  * RTC DS1339 on I2C bus
  ****************************************************************************/
 static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
 	I2C_BOARD_INFO("ds1339", 0x68),
 };

 /*****************************************************************************
  * General Setup
  ****************************************************************************/
 static unsigned int db88f5281_mpp_modes[] __initdata = {
 	MPP0_GPIO,		/* USB Over Current */
 	MPP1_GPIO,		/* USB Vbat input */
 	MPP2_PCI_ARB,		/* PCI_REQn[2] */
 	MPP3_PCI_ARB,		/* PCI_GNTn[2] */
 	MPP4_PCI_ARB,		/* PCI_REQn[3] */
 	MPP5_PCI_ARB,		/* PCI_GNTn[3] */
 	MPP6_GPIO,		/* JP0, CON17.2 */
 	MPP7_GPIO,		/* JP1, CON17.1 */
 	MPP8_GPIO,		/* JP2, CON11.2 */
 	MPP9_GPIO,		/* JP3, CON11.3 */
 	MPP10_GPIO,		/* RTC int */
 	MPP11_GPIO,		/* Baud Rate Generator */
 	MPP12_GPIO,		/* PCI int 1 */
 	MPP13_GPIO,		/* PCI int 2 */
 	MPP14_NAND,		/* NAND_REn[2] */
 	MPP15_NAND,		/* NAND_WEn[2] */
 	MPP16_UART,		/* UART1_RX */
 	MPP17_UART,		/* UART1_TX */
 	MPP18_UART,		/* UART1_CTSn */
 	MPP19_UART,		/* UART1_RTSn */
 	0,
 };

 static void __init db88f5281_init(void)
 {
 	/*
 	 * Basic Orion setup. Need to be called early.
 	 */
 	orion5x_init();

 	orion5x_mpp_conf(db88f5281_mpp_modes);
 	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */

 	/*
 	 * Configure peripherals.
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&db88f5281_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 	orion5x_uart1_init();

 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
 				    ORION_MBUS_DEVBUS_BOOT_ATTR,
 				    DB88F5281_NOR_BOOT_BASE,
 				    DB88F5281_NOR_BOOT_SIZE);
 	platform_device_register(&db88f5281_boot_flash);

 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
 				    ORION_MBUS_DEVBUS_ATTR(0),
 				    DB88F5281_7SEG_BASE,
 				    DB88F5281_7SEG_SIZE);

 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
 				    ORION_MBUS_DEVBUS_ATTR(1),
 				    DB88F5281_NOR_BASE,
 				    DB88F5281_NOR_SIZE);
 	platform_device_register(&db88f5281_nor_flash);

 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
 				    ORION_MBUS_DEVBUS_ATTR(2),
 				    DB88F5281_NAND_BASE,
 				    DB88F5281_NAND_SIZE);
 	platform_device_register(&db88f5281_nand_flash);

 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
 }

 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
 	.atag_offset	= 0x100,
 	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.init_time	= orion5x_timer_init,
 	.restart	= orion5x_restart,
 MACHINE_END
	/*
	* arch/arm/mach-orion5x/db88f5281-setup.c
	*
	* Marvell Orion-2 Development Board Setup
	*
	* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
	*
	* This file is licensed under the terms of the GNU General Public
	* License version 2. This program is licensed "as is" without any
	* warranty of any kind, whether express or implied.
	*/
	#include <linux/gpio.h>
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/platform_device.h>
	#include <linux/pci.h>
	#include <linux/irq.h>
	#include <linux/mtd/physmap.h>
	#include <linux/mtd/rawnand.h>
	#include <linux/timer.h>
	#include <linux/mv643xx_eth.h>
	#include <linux/i2c.h>
	#include <asm/mach-types.h>
	#include <asm/mach/arch.h>
	#include <asm/mach/pci.h>
	#include <linux/platform_data/mtd-orion_nand.h>
	#include "common.h"
	#include "mpp.h"
	#include "orion5x.h"

	/*****************************************************************************
	* DB-88F5281 on board devices
	****************************************************************************/

	/*
	* 512K NOR flash Device bus boot chip select
	*/

	#define DB88F5281_NOR_BOOT_BASE 0xf4000000
	#define DB88F5281_NOR_BOOT_SIZE SZ_512K

	/*
	* 7-Segment on Device bus chip select 0
	*/

	#define DB88F5281_7SEG_BASE 0xfa000000
	#define DB88F5281_7SEG_SIZE SZ_1K

	/*
	* 32M NOR flash on Device bus chip select 1
	*/

	#define DB88F5281_NOR_BASE 0xfc000000
	#define DB88F5281_NOR_SIZE SZ_32M

	/*
	* 32M NAND flash on Device bus chip select 2
	*/

	#define DB88F5281_NAND_BASE 0xfa800000
	#define DB88F5281_NAND_SIZE SZ_1K

	/*
	* PCI
	*/

	#define DB88F5281_PCI_SLOT0_OFFS 7
	#define DB88F5281_PCI_SLOT0_IRQ_PIN 12
	#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13

	/*****************************************************************************
	* 512M NOR Flash on Device bus Boot CS
	****************************************************************************/

	static struct physmap_flash_data db88f5281_boot_flash_data = {
	.width = 1, /* 8 bit bus width */
	};

	static struct resource db88f5281_boot_flash_resource = {
	.flags = IORESOURCE_MEM,
	.start = DB88F5281_NOR_BOOT_BASE,
	.end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
	};

	static struct platform_device db88f5281_boot_flash = {
	.name = "physmap-flash",
	.id = 0,
	.dev = {
	.platform_data = &db88f5281_boot_flash_data,
	},
	.num_resources = 1,
	.resource = &db88f5281_boot_flash_resource,
	};

	/*****************************************************************************
	* 32M NOR Flash on Device bus CS1
	****************************************************************************/

	static struct physmap_flash_data db88f5281_nor_flash_data = {
	.width = 4, /* 32 bit bus width */
	};

	static struct resource db88f5281_nor_flash_resource = {
	.flags = IORESOURCE_MEM,
	.start = DB88F5281_NOR_BASE,
	.end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
	};

	static struct platform_device db88f5281_nor_flash = {
	.name = "physmap-flash",
	.id = 1,
	.dev = {
	.platform_data = &db88f5281_nor_flash_data,
	},
	.num_resources = 1,
	.resource = &db88f5281_nor_flash_resource,
	};

	/*****************************************************************************
	* 32M NAND Flash on Device bus CS2
	****************************************************************************/

	static struct mtd_partition db88f5281_nand_parts[] = {
	{
	.name = "kernel",
	.offset = 0,
	.size = SZ_2M,
	}, {
	.name = "root",
	.offset = SZ_2M,
	.size = (SZ_16M - SZ_2M),
	}, {
	.name = "user",
	.offset = SZ_16M,
	.size = SZ_8M,
	}, {
	.name = "recovery",
	.offset = (SZ_16M + SZ_8M),
	.size = SZ_8M,
	},
	};

	static struct resource db88f5281_nand_resource = {
	.flags = IORESOURCE_MEM,
	.start = DB88F5281_NAND_BASE,
	.end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
	};

	static struct orion_nand_data db88f5281_nand_data = {
	.parts = db88f5281_nand_parts,
	.nr_parts = ARRAY_SIZE(db88f5281_nand_parts),
	.cle = 0,
	.ale = 1,
	.width = 8,
	};

	static struct platform_device db88f5281_nand_flash = {
	.name = "orion_nand",
	.id = -1,
	.dev = {
	.platform_data = &db88f5281_nand_data,
	},
	.resource = &db88f5281_nand_resource,
	.num_resources = 1,
	};

	/*****************************************************************************
	* 7-Segment on Device bus CS0
	* Dummy counter every 2 sec
	****************************************************************************/

	static void __iomem *db88f5281_7seg;
	static struct timer_list db88f5281_timer;

	static void db88f5281_7seg_event(unsigned long data)
	{
	static int count = 0;
	writel(0, db88f5281_7seg + (count << 4));
	count = (count + 1) & 7;
	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
	}

	static int __init db88f5281_7seg_init(void)
	{
	if (machine_is_db88f5281()) {
	db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
	DB88F5281_7SEG_SIZE);
	if (!db88f5281_7seg) {
	printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
	return -EIO;
	}
	setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
	}

	return 0;
	}

	__initcall(db88f5281_7seg_init);

	/*****************************************************************************
	* PCI
	****************************************************************************/

	static void __init db88f5281_pci_preinit(void)
	{
	int pin;

	/*
	* Configure PCI GPIO IRQ pins
	*/
	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
	if (gpio_request(pin, "PCI Int1") == 0) {
	if (gpio_direction_input(pin) == 0) {
	irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
	} else {
	printk(KERN_ERR "db88f5281_pci_preinit failed to "
	"set_irq_type pin %d\n", pin);
	gpio_free(pin);
	}
	} else {
	printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
	}

	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
	if (gpio_request(pin, "PCI Int2") == 0) {
	if (gpio_direction_input(pin) == 0) {
	irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
	} else {
	printk(KERN_ERR "db88f5281_pci_preinit failed "
	"to set_irq_type pin %d\n", pin);
	gpio_free(pin);
	}
	} else {
	printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
	}
	}

	static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
	u8 pin)
	{
	int irq;

	/*
	* Check for devices with hard-wired IRQs.
	*/
	irq = orion5x_pci_map_irq(dev, slot, pin);
	if (irq != -1)
	return irq;

	/*
	* PCI IRQs are connected via GPIOs.
	*/
	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
	case 0:
	return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
	case 1:
	case 2:
	return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
	default:
	return -1;
	}
	}

	static struct hw_pci db88f5281_pci __initdata = {
	.nr_controllers = 2,
	.preinit = db88f5281_pci_preinit,
	.setup = orion5x_pci_sys_setup,
	.scan = orion5x_pci_sys_scan_bus,
	.map_irq = db88f5281_pci_map_irq,
	};

	static int __init db88f5281_pci_init(void)
	{
	if (machine_is_db88f5281())
	pci_common_init(&db88f5281_pci);

	return 0;
	}

	subsys_initcall(db88f5281_pci_init);

	/*****************************************************************************
	* Ethernet
	****************************************************************************/
	static struct mv643xx_eth_platform_data db88f5281_eth_data = {
	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
	};

	/*****************************************************************************
	* RTC DS1339 on I2C bus
	****************************************************************************/
	static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
	I2C_BOARD_INFO("ds1339", 0x68),
	};

	/*****************************************************************************
	* General Setup
	****************************************************************************/
	static unsigned int db88f5281_mpp_modes[] __initdata = {
	MPP0_GPIO, /* USB Over Current */
	MPP1_GPIO, /* USB Vbat input */
	MPP2_PCI_ARB, /* PCI_REQn[2] */
	MPP3_PCI_ARB, /* PCI_GNTn[2] */
	MPP4_PCI_ARB, /* PCI_REQn[3] */
	MPP5_PCI_ARB, /* PCI_GNTn[3] */
	MPP6_GPIO, /* JP0, CON17.2 */
	MPP7_GPIO, /* JP1, CON17.1 */
	MPP8_GPIO, /* JP2, CON11.2 */
	MPP9_GPIO, /* JP3, CON11.3 */
	MPP10_GPIO, /* RTC int */
	MPP11_GPIO, /* Baud Rate Generator */
	MPP12_GPIO, /* PCI int 1 */
	MPP13_GPIO, /* PCI int 2 */
	MPP14_NAND, /* NAND_REn[2] */
	MPP15_NAND, /* NAND_WEn[2] */
	MPP16_UART, /* UART1_RX */
	MPP17_UART, /* UART1_TX */
	MPP18_UART, /* UART1_CTSn */
	MPP19_UART, /* UART1_RTSn */
	0,
	};

	static void __init db88f5281_init(void)
	{
	/*
	* Basic Orion setup. Need to be called early.
	*/
	orion5x_init();

	orion5x_mpp_conf(db88f5281_mpp_modes);
	writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */

	/*
	* Configure peripherals.
	*/
	orion5x_ehci0_init();
	orion5x_eth_init(&db88f5281_eth_data);
	orion5x_i2c_init();
	orion5x_uart0_init();
	orion5x_uart1_init();

	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
	ORION_MBUS_DEVBUS_BOOT_ATTR,
	DB88F5281_NOR_BOOT_BASE,
	DB88F5281_NOR_BOOT_SIZE);
	platform_device_register(&db88f5281_boot_flash);

	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
	ORION_MBUS_DEVBUS_ATTR(0),
	DB88F5281_7SEG_BASE,
	DB88F5281_7SEG_SIZE);

	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
	ORION_MBUS_DEVBUS_ATTR(1),
	DB88F5281_NOR_BASE,
	DB88F5281_NOR_SIZE);
	platform_device_register(&db88f5281_nor_flash);

	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
	ORION_MBUS_DEVBUS_ATTR(2),
	DB88F5281_NAND_BASE,
	DB88F5281_NAND_SIZE);
	platform_device_register(&db88f5281_nand_flash);

	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
	}

	MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
	.atag_offset = 0x100,
	.nr_irqs = ORION5X_NR_IRQS,
	.init_machine = db88f5281_init,
	.map_io = orion5x_map_io,
	.init_early = orion5x_init_early,
	.init_irq = orion5x_init_irq,
	.init_time = orion5x_timer_init,
	.restart = orion5x_restart,
	MACHINE_END