| /* |
| * Header for M-5MOLS 8M Pixel camera sensor with ISP |
| * |
| * Copyright (C) 2011 Samsung Electronics Co., Ltd. |
| * Author: HeungJun Kim <riverful.kim@samsung.com> |
| * |
| * Copyright (C) 2009 Samsung Electronics Co., Ltd. |
| * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #ifndef M5MOLS_H |
| #define M5MOLS_H |
| |
| #include <media/v4l2-subdev.h> |
| #include "m5mols_reg.h" |
| |
| extern int m5mols_debug; |
| |
| enum m5mols_restype { |
| M5MOLS_RESTYPE_MONITOR, |
| M5MOLS_RESTYPE_CAPTURE, |
| M5MOLS_RESTYPE_MAX, |
| }; |
| |
| /** |
| * struct m5mols_resolution - structure for the resolution |
| * @type: resolution type according to the pixel code |
| * @width: width of the resolution |
| * @height: height of the resolution |
| * @reg: resolution preset register value |
| */ |
| struct m5mols_resolution { |
| u8 reg; |
| enum m5mols_restype type; |
| u16 width; |
| u16 height; |
| }; |
| |
| /** |
| * struct m5mols_exif - structure for the EXIF information of M-5MOLS |
| * @exposure_time: exposure time register value |
| * @shutter_speed: speed of the shutter register value |
| * @aperture: aperture register value |
| * @exposure_bias: it calls also EV bias |
| * @iso_speed: ISO register value |
| * @flash: status register value of the flash |
| * @sdr: status register value of the Subject Distance Range |
| * @qval: not written exact meaning in document |
| */ |
| struct m5mols_exif { |
| u32 exposure_time; |
| u32 shutter_speed; |
| u32 aperture; |
| u32 brightness; |
| u32 exposure_bias; |
| u16 iso_speed; |
| u16 flash; |
| u16 sdr; |
| u16 qval; |
| }; |
| |
| /** |
| * struct m5mols_capture - Structure for the capture capability |
| * @exif: EXIF information |
| * @main: size in bytes of the main image |
| * @thumb: size in bytes of the thumb image, if it was accompanied |
| * @total: total size in bytes of the produced image |
| */ |
| struct m5mols_capture { |
| struct m5mols_exif exif; |
| u32 main; |
| u32 thumb; |
| u32 total; |
| }; |
| |
| /** |
| * struct m5mols_scenemode - structure for the scenemode capability |
| * @metering: metering light register value |
| * @ev_bias: EV bias register value |
| * @wb_mode: mode which means the WhiteBalance is Auto or Manual |
| * @wb_preset: whitebalance preset register value in the Manual mode |
| * @chroma_en: register value whether the Chroma capability is enabled or not |
| * @chroma_lvl: chroma's level register value |
| * @edge_en: register value Whether the Edge capability is enabled or not |
| * @edge_lvl: edge's level register value |
| * @af_range: Auto Focus's range |
| * @fd_mode: Face Detection mode |
| * @mcc: Multi-axis Color Conversion which means emotion color |
| * @light: status of the Light |
| * @flash: status of the Flash |
| * @tone: Tone color which means Contrast |
| * @iso: ISO register value |
| * @capt_mode: Mode of the Image Stabilization while the camera capturing |
| * @wdr: Wide Dynamic Range register value |
| * |
| * The each value according to each scenemode is recommended in the documents. |
| */ |
| struct m5mols_scenemode { |
| u8 metering; |
| u8 ev_bias; |
| u8 wb_mode; |
| u8 wb_preset; |
| u8 chroma_en; |
| u8 chroma_lvl; |
| u8 edge_en; |
| u8 edge_lvl; |
| u8 af_range; |
| u8 fd_mode; |
| u8 mcc; |
| u8 light; |
| u8 flash; |
| u8 tone; |
| u8 iso; |
| u8 capt_mode; |
| u8 wdr; |
| }; |
| |
| /** |
| * struct m5mols_version - firmware version information |
| * @customer: customer information |
| * @project: version of project information according to customer |
| * @fw: firmware revision |
| * @hw: hardware revision |
| * @param: version of the parameter |
| * @awb: Auto WhiteBalance algorithm version |
| * @str: information about manufacturer and packaging vendor |
| * @af: Auto Focus version |
| * |
| * The register offset starts the customer version at 0x0, and it ends |
| * the awb version at 0x09. The customer, project information occupies 1 bytes |
| * each. And also the fw, hw, param, awb each requires 2 bytes. The str is |
| * unique string associated with firmware's version. It includes information |
| * about manufacturer and the vendor of the sensor's packaging. The least |
| * significant 2 bytes of the string indicate packaging manufacturer. |
| */ |
| #define VERSION_STRING_SIZE 22 |
| struct m5mols_version { |
| u8 customer; |
| u8 project; |
| u16 fw; |
| u16 hw; |
| u16 param; |
| u16 awb; |
| u8 str[VERSION_STRING_SIZE]; |
| u8 af; |
| }; |
| |
| /** |
| * struct m5mols_info - M-5MOLS driver data structure |
| * @pdata: platform data |
| * @sd: v4l-subdev instance |
| * @pad: media pad |
| * @ffmt: current fmt according to resolution type |
| * @res_type: current resolution type |
| * @irq_waitq: waitqueue for the capture |
| * @irq_done: set to 1 in the interrupt handler |
| * @handle: control handler |
| * @auto_exposure: auto/manual exposure control |
| * @exposure_bias: exposure compensation control |
| * @exposure: manual exposure control |
| * @metering: exposure metering control |
| * @auto_iso: auto/manual ISO sensitivity control |
| * @iso: manual ISO sensitivity control |
| * @auto_wb: auto white balance control |
| * @lock_3a: 3A lock control |
| * @colorfx: color effect control |
| * @saturation: saturation control |
| * @zoom: zoom control |
| * @wdr: wide dynamic range control |
| * @stabilization: image stabilization control |
| * @jpeg_quality: JPEG compression quality control |
| * @ver: information of the version |
| * @cap: the capture mode attributes |
| * @isp_ready: 1 when the ISP controller has completed booting |
| * @power: current sensor's power status |
| * @ctrl_sync: 1 when the control handler state is restored in H/W |
| * @resolution: register value for current resolution |
| * @mode: register value for current operation mode |
| * @set_power: optional power callback to the board code |
| */ |
| struct m5mols_info { |
| const struct m5mols_platform_data *pdata; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; |
| int res_type; |
| |
| wait_queue_head_t irq_waitq; |
| atomic_t irq_done; |
| |
| struct v4l2_ctrl_handler handle; |
| struct { |
| /* exposure/exposure bias/auto exposure cluster */ |
| struct v4l2_ctrl *auto_exposure; |
| struct v4l2_ctrl *exposure_bias; |
| struct v4l2_ctrl *exposure; |
| struct v4l2_ctrl *metering; |
| }; |
| struct { |
| /* iso/auto iso cluster */ |
| struct v4l2_ctrl *auto_iso; |
| struct v4l2_ctrl *iso; |
| }; |
| struct v4l2_ctrl *auto_wb; |
| |
| struct v4l2_ctrl *lock_3a; |
| struct v4l2_ctrl *colorfx; |
| struct v4l2_ctrl *saturation; |
| struct v4l2_ctrl *zoom; |
| struct v4l2_ctrl *wdr; |
| struct v4l2_ctrl *stabilization; |
| struct v4l2_ctrl *jpeg_quality; |
| |
| struct m5mols_version ver; |
| struct m5mols_capture cap; |
| |
| unsigned int isp_ready:1; |
| unsigned int power:1; |
| unsigned int ctrl_sync:1; |
| |
| u8 resolution; |
| u8 mode; |
| |
| int (*set_power)(struct device *dev, int on); |
| }; |
| |
| #define is_available_af(__info) (__info->ver.af) |
| #define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code) |
| #define is_manufacturer(__info, __manufacturer) \ |
| (__info->ver.str[0] == __manufacturer[0] && \ |
| __info->ver.str[1] == __manufacturer[1]) |
| /* |
| * I2C operation of the M-5MOLS |
| * |
| * The I2C read operation of the M-5MOLS requires 2 messages. The first |
| * message sends the information about the command, command category, and total |
| * message size. The second message is used to retrieve the data specifed in |
| * the first message |
| * |
| * 1st message 2nd message |
| * +-------+---+----------+-----+-------+ +------+------+------+------+ |
| * | size1 | R | category | cmd | size2 | | d[0] | d[1] | d[2] | d[3] | |
| * +-------+---+----------+-----+-------+ +------+------+------+------+ |
| * - size1: message data size(5 in this case) |
| * - size2: desired buffer size of the 2nd message |
| * - d[0..3]: according to size2 |
| * |
| * The I2C write operation needs just one message. The message includes |
| * category, command, total size, and desired data. |
| * |
| * 1st message |
| * +-------+---+----------+-----+------+------+------+------+ |
| * | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] | |
| * +-------+---+----------+-----+------+------+------+------+ |
| * - d[0..3]: according to size1 |
| */ |
| int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val); |
| int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val); |
| int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); |
| int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val); |
| |
| int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask, |
| int timeout); |
| |
| /* Mask value for busy waiting until M-5MOLS I2C interface is initialized */ |
| #define M5MOLS_I2C_RDY_WAIT_FL (1 << 16) |
| /* ISP state transition timeout, in ms */ |
| #define M5MOLS_MODE_CHANGE_TIMEOUT 200 |
| #define M5MOLS_BUSY_WAIT_DEF_TIMEOUT 250 |
| |
| /* |
| * Mode operation of the M-5MOLS |
| * |
| * Changing the mode of the M-5MOLS is needed right executing order. |
| * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed |
| * by user. There are various categories associated with each mode. |
| * |
| * +============================================================+ |
| * | mode | category | |
| * +============================================================+ |
| * | FLASH | FLASH(only after Stand-by or Power-on) | |
| * | SYSTEM | SYSTEM(only after sensor arm-booting) | |
| * | PARAMETER | PARAMETER | |
| * | MONITOR | MONITOR(preview), Auto Focus, Face Detection | |
| * | CAPTURE | Single CAPTURE, Preview(recording) | |
| * +============================================================+ |
| * |
| * The available executing order between each modes are as follows: |
| * PARAMETER <---> MONITOR <---> CAPTURE |
| */ |
| int m5mols_set_mode(struct m5mols_info *info, u8 mode); |
| |
| int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg); |
| int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 condition, u32 timeout); |
| int m5mols_restore_controls(struct m5mols_info *info); |
| int m5mols_start_capture(struct m5mols_info *info); |
| int m5mols_do_scenemode(struct m5mols_info *info, u8 mode); |
| int m5mols_lock_3a(struct m5mols_info *info, bool lock); |
| int m5mols_set_ctrl(struct v4l2_ctrl *ctrl); |
| int m5mols_init_controls(struct v4l2_subdev *sd); |
| |
| /* The firmware function */ |
| int m5mols_update_fw(struct v4l2_subdev *sd, |
| int (*set_power)(struct m5mols_info *, bool)); |
| |
| static inline struct m5mols_info *to_m5mols(struct v4l2_subdev *subdev) |
| { |
| return container_of(subdev, struct m5mols_info, sd); |
| } |
| |
| static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) |
| { |
| struct m5mols_info *info = container_of(ctrl->handler, |
| struct m5mols_info, handle); |
| return &info->sd; |
| } |
| |
| static inline void m5mols_set_ctrl_mode(struct v4l2_ctrl *ctrl, |
| unsigned int mode) |
| { |
| ctrl->priv = (void *)mode; |
| } |
| |
| static inline unsigned int m5mols_get_ctrl_mode(struct v4l2_ctrl *ctrl) |
| { |
| return (unsigned int)ctrl->priv; |
| } |
| |
| #endif /* M5MOLS_H */ |