| /* |
| * Copyright (C) 2012 Texas Instruments |
| * Author: Rob Clark <robdclark@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| |
| |
| #include <linux/module.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_encoder_slave.h> |
| #include <drm/drm_edid.h> |
| #include <drm/i2c/tda998x.h> |
| |
| #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) |
| |
| struct tda998x_priv { |
| struct i2c_client *cec; |
| uint16_t rev; |
| uint8_t current_page; |
| int dpms; |
| bool is_hdmi_sink; |
| u8 vip_cntrl_0; |
| u8 vip_cntrl_1; |
| u8 vip_cntrl_2; |
| struct tda998x_encoder_params params; |
| }; |
| |
| #define to_tda998x_priv(x) ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv) |
| |
| /* The TDA9988 series of devices use a paged register scheme.. to simplify |
| * things we encode the page # in upper bits of the register #. To read/ |
| * write a given register, we need to make sure CURPAGE register is set |
| * appropriately. Which implies reads/writes are not atomic. Fun! |
| */ |
| |
| #define REG(page, addr) (((page) << 8) | (addr)) |
| #define REG2ADDR(reg) ((reg) & 0xff) |
| #define REG2PAGE(reg) (((reg) >> 8) & 0xff) |
| |
| #define REG_CURPAGE 0xff /* write */ |
| |
| |
| /* Page 00h: General Control */ |
| #define REG_VERSION_LSB REG(0x00, 0x00) /* read */ |
| #define REG_MAIN_CNTRL0 REG(0x00, 0x01) /* read/write */ |
| # define MAIN_CNTRL0_SR (1 << 0) |
| # define MAIN_CNTRL0_DECS (1 << 1) |
| # define MAIN_CNTRL0_DEHS (1 << 2) |
| # define MAIN_CNTRL0_CECS (1 << 3) |
| # define MAIN_CNTRL0_CEHS (1 << 4) |
| # define MAIN_CNTRL0_SCALER (1 << 7) |
| #define REG_VERSION_MSB REG(0x00, 0x02) /* read */ |
| #define REG_SOFTRESET REG(0x00, 0x0a) /* write */ |
| # define SOFTRESET_AUDIO (1 << 0) |
| # define SOFTRESET_I2C_MASTER (1 << 1) |
| #define REG_DDC_DISABLE REG(0x00, 0x0b) /* read/write */ |
| #define REG_CCLK_ON REG(0x00, 0x0c) /* read/write */ |
| #define REG_I2C_MASTER REG(0x00, 0x0d) /* read/write */ |
| # define I2C_MASTER_DIS_MM (1 << 0) |
| # define I2C_MASTER_DIS_FILT (1 << 1) |
| # define I2C_MASTER_APP_STRT_LAT (1 << 2) |
| #define REG_FEAT_POWERDOWN REG(0x00, 0x0e) /* read/write */ |
| # define FEAT_POWERDOWN_SPDIF (1 << 3) |
| #define REG_INT_FLAGS_0 REG(0x00, 0x0f) /* read/write */ |
| #define REG_INT_FLAGS_1 REG(0x00, 0x10) /* read/write */ |
| #define REG_INT_FLAGS_2 REG(0x00, 0x11) /* read/write */ |
| # define INT_FLAGS_2_EDID_BLK_RD (1 << 1) |
| #define REG_ENA_ACLK REG(0x00, 0x16) /* read/write */ |
| #define REG_ENA_VP_0 REG(0x00, 0x18) /* read/write */ |
| #define REG_ENA_VP_1 REG(0x00, 0x19) /* read/write */ |
| #define REG_ENA_VP_2 REG(0x00, 0x1a) /* read/write */ |
| #define REG_ENA_AP REG(0x00, 0x1e) /* read/write */ |
| #define REG_VIP_CNTRL_0 REG(0x00, 0x20) /* write */ |
| # define VIP_CNTRL_0_MIRR_A (1 << 7) |
| # define VIP_CNTRL_0_SWAP_A(x) (((x) & 7) << 4) |
| # define VIP_CNTRL_0_MIRR_B (1 << 3) |
| # define VIP_CNTRL_0_SWAP_B(x) (((x) & 7) << 0) |
| #define REG_VIP_CNTRL_1 REG(0x00, 0x21) /* write */ |
| # define VIP_CNTRL_1_MIRR_C (1 << 7) |
| # define VIP_CNTRL_1_SWAP_C(x) (((x) & 7) << 4) |
| # define VIP_CNTRL_1_MIRR_D (1 << 3) |
| # define VIP_CNTRL_1_SWAP_D(x) (((x) & 7) << 0) |
| #define REG_VIP_CNTRL_2 REG(0x00, 0x22) /* write */ |
| # define VIP_CNTRL_2_MIRR_E (1 << 7) |
| # define VIP_CNTRL_2_SWAP_E(x) (((x) & 7) << 4) |
| # define VIP_CNTRL_2_MIRR_F (1 << 3) |
| # define VIP_CNTRL_2_SWAP_F(x) (((x) & 7) << 0) |
| #define REG_VIP_CNTRL_3 REG(0x00, 0x23) /* write */ |
| # define VIP_CNTRL_3_X_TGL (1 << 0) |
| # define VIP_CNTRL_3_H_TGL (1 << 1) |
| # define VIP_CNTRL_3_V_TGL (1 << 2) |
| # define VIP_CNTRL_3_EMB (1 << 3) |
| # define VIP_CNTRL_3_SYNC_DE (1 << 4) |
| # define VIP_CNTRL_3_SYNC_HS (1 << 5) |
| # define VIP_CNTRL_3_DE_INT (1 << 6) |
| # define VIP_CNTRL_3_EDGE (1 << 7) |
| #define REG_VIP_CNTRL_4 REG(0x00, 0x24) /* write */ |
| # define VIP_CNTRL_4_BLC(x) (((x) & 3) << 0) |
| # define VIP_CNTRL_4_BLANKIT(x) (((x) & 3) << 2) |
| # define VIP_CNTRL_4_CCIR656 (1 << 4) |
| # define VIP_CNTRL_4_656_ALT (1 << 5) |
| # define VIP_CNTRL_4_TST_656 (1 << 6) |
| # define VIP_CNTRL_4_TST_PAT (1 << 7) |
| #define REG_VIP_CNTRL_5 REG(0x00, 0x25) /* write */ |
| # define VIP_CNTRL_5_CKCASE (1 << 0) |
| # define VIP_CNTRL_5_SP_CNT(x) (((x) & 3) << 1) |
| #define REG_MUX_AP REG(0x00, 0x26) /* read/write */ |
| #define REG_MUX_VP_VIP_OUT REG(0x00, 0x27) /* read/write */ |
| #define REG_MAT_CONTRL REG(0x00, 0x80) /* write */ |
| # define MAT_CONTRL_MAT_SC(x) (((x) & 3) << 0) |
| # define MAT_CONTRL_MAT_BP (1 << 2) |
| #define REG_VIDFORMAT REG(0x00, 0xa0) /* write */ |
| #define REG_REFPIX_MSB REG(0x00, 0xa1) /* write */ |
| #define REG_REFPIX_LSB REG(0x00, 0xa2) /* write */ |
| #define REG_REFLINE_MSB REG(0x00, 0xa3) /* write */ |
| #define REG_REFLINE_LSB REG(0x00, 0xa4) /* write */ |
| #define REG_NPIX_MSB REG(0x00, 0xa5) /* write */ |
| #define REG_NPIX_LSB REG(0x00, 0xa6) /* write */ |
| #define REG_NLINE_MSB REG(0x00, 0xa7) /* write */ |
| #define REG_NLINE_LSB REG(0x00, 0xa8) /* write */ |
| #define REG_VS_LINE_STRT_1_MSB REG(0x00, 0xa9) /* write */ |
| #define REG_VS_LINE_STRT_1_LSB REG(0x00, 0xaa) /* write */ |
| #define REG_VS_PIX_STRT_1_MSB REG(0x00, 0xab) /* write */ |
| #define REG_VS_PIX_STRT_1_LSB REG(0x00, 0xac) /* write */ |
| #define REG_VS_LINE_END_1_MSB REG(0x00, 0xad) /* write */ |
| #define REG_VS_LINE_END_1_LSB REG(0x00, 0xae) /* write */ |
| #define REG_VS_PIX_END_1_MSB REG(0x00, 0xaf) /* write */ |
| #define REG_VS_PIX_END_1_LSB REG(0x00, 0xb0) /* write */ |
| #define REG_VS_LINE_STRT_2_MSB REG(0x00, 0xb1) /* write */ |
| #define REG_VS_LINE_STRT_2_LSB REG(0x00, 0xb2) /* write */ |
| #define REG_VS_PIX_STRT_2_MSB REG(0x00, 0xb3) /* write */ |
| #define REG_VS_PIX_STRT_2_LSB REG(0x00, 0xb4) /* write */ |
| #define REG_VS_LINE_END_2_MSB REG(0x00, 0xb5) /* write */ |
| #define REG_VS_LINE_END_2_LSB REG(0x00, 0xb6) /* write */ |
| #define REG_VS_PIX_END_2_MSB REG(0x00, 0xb7) /* write */ |
| #define REG_VS_PIX_END_2_LSB REG(0x00, 0xb8) /* write */ |
| #define REG_HS_PIX_START_MSB REG(0x00, 0xb9) /* write */ |
| #define REG_HS_PIX_START_LSB REG(0x00, 0xba) /* write */ |
| #define REG_HS_PIX_STOP_MSB REG(0x00, 0xbb) /* write */ |
| #define REG_HS_PIX_STOP_LSB REG(0x00, 0xbc) /* write */ |
| #define REG_VWIN_START_1_MSB REG(0x00, 0xbd) /* write */ |
| #define REG_VWIN_START_1_LSB REG(0x00, 0xbe) /* write */ |
| #define REG_VWIN_END_1_MSB REG(0x00, 0xbf) /* write */ |
| #define REG_VWIN_END_1_LSB REG(0x00, 0xc0) /* write */ |
| #define REG_VWIN_START_2_MSB REG(0x00, 0xc1) /* write */ |
| #define REG_VWIN_START_2_LSB REG(0x00, 0xc2) /* write */ |
| #define REG_VWIN_END_2_MSB REG(0x00, 0xc3) /* write */ |
| #define REG_VWIN_END_2_LSB REG(0x00, 0xc4) /* write */ |
| #define REG_DE_START_MSB REG(0x00, 0xc5) /* write */ |
| #define REG_DE_START_LSB REG(0x00, 0xc6) /* write */ |
| #define REG_DE_STOP_MSB REG(0x00, 0xc7) /* write */ |
| #define REG_DE_STOP_LSB REG(0x00, 0xc8) /* write */ |
| #define REG_TBG_CNTRL_0 REG(0x00, 0xca) /* write */ |
| # define TBG_CNTRL_0_TOP_TGL (1 << 0) |
| # define TBG_CNTRL_0_TOP_SEL (1 << 1) |
| # define TBG_CNTRL_0_DE_EXT (1 << 2) |
| # define TBG_CNTRL_0_TOP_EXT (1 << 3) |
| # define TBG_CNTRL_0_FRAME_DIS (1 << 5) |
| # define TBG_CNTRL_0_SYNC_MTHD (1 << 6) |
| # define TBG_CNTRL_0_SYNC_ONCE (1 << 7) |
| #define REG_TBG_CNTRL_1 REG(0x00, 0xcb) /* write */ |
| # define TBG_CNTRL_1_H_TGL (1 << 0) |
| # define TBG_CNTRL_1_V_TGL (1 << 1) |
| # define TBG_CNTRL_1_TGL_EN (1 << 2) |
| # define TBG_CNTRL_1_X_EXT (1 << 3) |
| # define TBG_CNTRL_1_H_EXT (1 << 4) |
| # define TBG_CNTRL_1_V_EXT (1 << 5) |
| # define TBG_CNTRL_1_DWIN_DIS (1 << 6) |
| #define REG_ENABLE_SPACE REG(0x00, 0xd6) /* write */ |
| #define REG_HVF_CNTRL_0 REG(0x00, 0xe4) /* write */ |
| # define HVF_CNTRL_0_SM (1 << 7) |
| # define HVF_CNTRL_0_RWB (1 << 6) |
| # define HVF_CNTRL_0_PREFIL(x) (((x) & 3) << 2) |
| # define HVF_CNTRL_0_INTPOL(x) (((x) & 3) << 0) |
| #define REG_HVF_CNTRL_1 REG(0x00, 0xe5) /* write */ |
| # define HVF_CNTRL_1_FOR (1 << 0) |
| # define HVF_CNTRL_1_YUVBLK (1 << 1) |
| # define HVF_CNTRL_1_VQR(x) (((x) & 3) << 2) |
| # define HVF_CNTRL_1_PAD(x) (((x) & 3) << 4) |
| # define HVF_CNTRL_1_SEMI_PLANAR (1 << 6) |
| #define REG_RPT_CNTRL REG(0x00, 0xf0) /* write */ |
| #define REG_I2S_FORMAT REG(0x00, 0xfc) /* read/write */ |
| # define I2S_FORMAT(x) (((x) & 3) << 0) |
| #define REG_AIP_CLKSEL REG(0x00, 0xfd) /* write */ |
| # define AIP_CLKSEL_FS(x) (((x) & 3) << 0) |
| # define AIP_CLKSEL_CLK_POL(x) (((x) & 1) << 2) |
| # define AIP_CLKSEL_AIP(x) (((x) & 7) << 3) |
| |
| |
| /* Page 02h: PLL settings */ |
| #define REG_PLL_SERIAL_1 REG(0x02, 0x00) /* read/write */ |
| # define PLL_SERIAL_1_SRL_FDN (1 << 0) |
| # define PLL_SERIAL_1_SRL_IZ(x) (((x) & 3) << 1) |
| # define PLL_SERIAL_1_SRL_MAN_IZ (1 << 6) |
| #define REG_PLL_SERIAL_2 REG(0x02, 0x01) /* read/write */ |
| # define PLL_SERIAL_2_SRL_NOSC(x) (((x) & 3) << 0) |
| # define PLL_SERIAL_2_SRL_PR(x) (((x) & 0xf) << 4) |
| #define REG_PLL_SERIAL_3 REG(0x02, 0x02) /* read/write */ |
| # define PLL_SERIAL_3_SRL_CCIR (1 << 0) |
| # define PLL_SERIAL_3_SRL_DE (1 << 2) |
| # define PLL_SERIAL_3_SRL_PXIN_SEL (1 << 4) |
| #define REG_SERIALIZER REG(0x02, 0x03) /* read/write */ |
| #define REG_BUFFER_OUT REG(0x02, 0x04) /* read/write */ |
| #define REG_PLL_SCG1 REG(0x02, 0x05) /* read/write */ |
| #define REG_PLL_SCG2 REG(0x02, 0x06) /* read/write */ |
| #define REG_PLL_SCGN1 REG(0x02, 0x07) /* read/write */ |
| #define REG_PLL_SCGN2 REG(0x02, 0x08) /* read/write */ |
| #define REG_PLL_SCGR1 REG(0x02, 0x09) /* read/write */ |
| #define REG_PLL_SCGR2 REG(0x02, 0x0a) /* read/write */ |
| #define REG_AUDIO_DIV REG(0x02, 0x0e) /* read/write */ |
| # define AUDIO_DIV_SERCLK_1 0 |
| # define AUDIO_DIV_SERCLK_2 1 |
| # define AUDIO_DIV_SERCLK_4 2 |
| # define AUDIO_DIV_SERCLK_8 3 |
| # define AUDIO_DIV_SERCLK_16 4 |
| # define AUDIO_DIV_SERCLK_32 5 |
| #define REG_SEL_CLK REG(0x02, 0x11) /* read/write */ |
| # define SEL_CLK_SEL_CLK1 (1 << 0) |
| # define SEL_CLK_SEL_VRF_CLK(x) (((x) & 3) << 1) |
| # define SEL_CLK_ENA_SC_CLK (1 << 3) |
| #define REG_ANA_GENERAL REG(0x02, 0x12) /* read/write */ |
| |
| |
| /* Page 09h: EDID Control */ |
| #define REG_EDID_DATA_0 REG(0x09, 0x00) /* read */ |
| /* next 127 successive registers are the EDID block */ |
| #define REG_EDID_CTRL REG(0x09, 0xfa) /* read/write */ |
| #define REG_DDC_ADDR REG(0x09, 0xfb) /* read/write */ |
| #define REG_DDC_OFFS REG(0x09, 0xfc) /* read/write */ |
| #define REG_DDC_SEGM_ADDR REG(0x09, 0xfd) /* read/write */ |
| #define REG_DDC_SEGM REG(0x09, 0xfe) /* read/write */ |
| |
| |
| /* Page 10h: information frames and packets */ |
| #define REG_IF1_HB0 REG(0x10, 0x20) /* read/write */ |
| #define REG_IF2_HB0 REG(0x10, 0x40) /* read/write */ |
| #define REG_IF3_HB0 REG(0x10, 0x60) /* read/write */ |
| #define REG_IF4_HB0 REG(0x10, 0x80) /* read/write */ |
| #define REG_IF5_HB0 REG(0x10, 0xa0) /* read/write */ |
| |
| |
| /* Page 11h: audio settings and content info packets */ |
| #define REG_AIP_CNTRL_0 REG(0x11, 0x00) /* read/write */ |
| # define AIP_CNTRL_0_RST_FIFO (1 << 0) |
| # define AIP_CNTRL_0_SWAP (1 << 1) |
| # define AIP_CNTRL_0_LAYOUT (1 << 2) |
| # define AIP_CNTRL_0_ACR_MAN (1 << 5) |
| # define AIP_CNTRL_0_RST_CTS (1 << 6) |
| #define REG_CA_I2S REG(0x11, 0x01) /* read/write */ |
| # define CA_I2S_CA_I2S(x) (((x) & 31) << 0) |
| # define CA_I2S_HBR_CHSTAT (1 << 6) |
| #define REG_LATENCY_RD REG(0x11, 0x04) /* read/write */ |
| #define REG_ACR_CTS_0 REG(0x11, 0x05) /* read/write */ |
| #define REG_ACR_CTS_1 REG(0x11, 0x06) /* read/write */ |
| #define REG_ACR_CTS_2 REG(0x11, 0x07) /* read/write */ |
| #define REG_ACR_N_0 REG(0x11, 0x08) /* read/write */ |
| #define REG_ACR_N_1 REG(0x11, 0x09) /* read/write */ |
| #define REG_ACR_N_2 REG(0x11, 0x0a) /* read/write */ |
| #define REG_CTS_N REG(0x11, 0x0c) /* read/write */ |
| # define CTS_N_K(x) (((x) & 7) << 0) |
| # define CTS_N_M(x) (((x) & 3) << 4) |
| #define REG_ENC_CNTRL REG(0x11, 0x0d) /* read/write */ |
| # define ENC_CNTRL_RST_ENC (1 << 0) |
| # define ENC_CNTRL_RST_SEL (1 << 1) |
| # define ENC_CNTRL_CTL_CODE(x) (((x) & 3) << 2) |
| #define REG_DIP_FLAGS REG(0x11, 0x0e) /* read/write */ |
| # define DIP_FLAGS_ACR (1 << 0) |
| # define DIP_FLAGS_GC (1 << 1) |
| #define REG_DIP_IF_FLAGS REG(0x11, 0x0f) /* read/write */ |
| # define DIP_IF_FLAGS_IF1 (1 << 1) |
| # define DIP_IF_FLAGS_IF2 (1 << 2) |
| # define DIP_IF_FLAGS_IF3 (1 << 3) |
| # define DIP_IF_FLAGS_IF4 (1 << 4) |
| # define DIP_IF_FLAGS_IF5 (1 << 5) |
| #define REG_CH_STAT_B(x) REG(0x11, 0x14 + (x)) /* read/write */ |
| |
| |
| /* Page 12h: HDCP and OTP */ |
| #define REG_TX3 REG(0x12, 0x9a) /* read/write */ |
| #define REG_TX4 REG(0x12, 0x9b) /* read/write */ |
| # define TX4_PD_RAM (1 << 1) |
| #define REG_TX33 REG(0x12, 0xb8) /* read/write */ |
| # define TX33_HDMI (1 << 1) |
| |
| |
| /* Page 13h: Gamut related metadata packets */ |
| |
| |
| |
| /* CEC registers: (not paged) |
| */ |
| #define REG_CEC_FRO_IM_CLK_CTRL 0xfb /* read/write */ |
| # define CEC_FRO_IM_CLK_CTRL_GHOST_DIS (1 << 7) |
| # define CEC_FRO_IM_CLK_CTRL_ENA_OTP (1 << 6) |
| # define CEC_FRO_IM_CLK_CTRL_IMCLK_SEL (1 << 1) |
| # define CEC_FRO_IM_CLK_CTRL_FRO_DIV (1 << 0) |
| #define REG_CEC_RXSHPDLEV 0xfe /* read */ |
| # define CEC_RXSHPDLEV_RXSENS (1 << 0) |
| # define CEC_RXSHPDLEV_HPD (1 << 1) |
| |
| #define REG_CEC_ENAMODS 0xff /* read/write */ |
| # define CEC_ENAMODS_DIS_FRO (1 << 6) |
| # define CEC_ENAMODS_DIS_CCLK (1 << 5) |
| # define CEC_ENAMODS_EN_RXSENS (1 << 2) |
| # define CEC_ENAMODS_EN_HDMI (1 << 1) |
| # define CEC_ENAMODS_EN_CEC (1 << 0) |
| |
| |
| /* Device versions: */ |
| #define TDA9989N2 0x0101 |
| #define TDA19989 0x0201 |
| #define TDA19989N2 0x0202 |
| #define TDA19988 0x0301 |
| |
| static void |
| cec_write(struct drm_encoder *encoder, uint16_t addr, uint8_t val) |
| { |
| struct i2c_client *client = to_tda998x_priv(encoder)->cec; |
| uint8_t buf[] = {addr, val}; |
| int ret; |
| |
| ret = i2c_master_send(client, buf, ARRAY_SIZE(buf)); |
| if (ret < 0) |
| dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr); |
| } |
| |
| static uint8_t |
| cec_read(struct drm_encoder *encoder, uint8_t addr) |
| { |
| struct i2c_client *client = to_tda998x_priv(encoder)->cec; |
| uint8_t val; |
| int ret; |
| |
| ret = i2c_master_send(client, &addr, sizeof(addr)); |
| if (ret < 0) |
| goto fail; |
| |
| ret = i2c_master_recv(client, &val, sizeof(val)); |
| if (ret < 0) |
| goto fail; |
| |
| return val; |
| |
| fail: |
| dev_err(&client->dev, "Error %d reading from cec:0x%x\n", ret, addr); |
| return 0; |
| } |
| |
| static void |
| set_page(struct drm_encoder *encoder, uint16_t reg) |
| { |
| struct tda998x_priv *priv = to_tda998x_priv(encoder); |
| |
| if (REG2PAGE(reg) != priv->current_page) { |
| struct i2c_client *client = drm_i2c_encoder_get_client(encoder); |
| uint8_t buf[] = { |
| REG_CURPAGE, REG2PAGE(reg) |
| }; |
| int ret = i2c_master_send(client, buf, sizeof(buf)); |
| if (ret < 0) |
| dev_err(&client->dev, "Error %d writing to REG_CURPAGE\n", ret); |
| |
| priv->current_page = REG2PAGE(reg); |
| } |
| } |
| |
| static int |
| reg_read_range(struct drm_encoder *encoder, uint16_t reg, char *buf, int cnt) |
| { |
| struct i2c_client *client = drm_i2c_encoder_get_client(encoder); |
| uint8_t addr = REG2ADDR(reg); |
| int ret; |
| |
| set_page(encoder, reg); |
| |
| ret = i2c_master_send(client, &addr, sizeof(addr)); |
| if (ret < 0) |
| goto fail; |
| |
| ret = i2c_master_recv(client, buf, cnt); |
| if (ret < 0) |
| goto fail; |
| |
| return ret; |
| |
| fail: |
| dev_err(&client->dev, "Error %d reading from 0x%x\n", ret, reg); |
| return ret; |
| } |
| |
| static void |
| reg_write_range(struct drm_encoder *encoder, uint16_t reg, uint8_t *p, int cnt) |
| { |
| struct i2c_client *client = drm_i2c_encoder_get_client(encoder); |
| uint8_t buf[cnt+1]; |
| int ret; |
| |
| buf[0] = REG2ADDR(reg); |
| memcpy(&buf[1], p, cnt); |
| |
| set_page(encoder, reg); |
| |
| ret = i2c_master_send(client, buf, cnt + 1); |
| if (ret < 0) |
| dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg); |
| } |
| |
| static uint8_t |
| reg_read(struct drm_encoder *encoder, uint16_t reg) |
| { |
| uint8_t val = 0; |
| reg_read_range(encoder, reg, &val, sizeof(val)); |
| return val; |
| } |
| |
| static void |
| reg_write(struct drm_encoder *encoder, uint16_t reg, uint8_t val) |
| { |
| struct i2c_client *client = drm_i2c_encoder_get_client(encoder); |
| uint8_t buf[] = {REG2ADDR(reg), val}; |
| int ret; |
| |
| set_page(encoder, reg); |
| |
| ret = i2c_master_send(client, buf, ARRAY_SIZE(buf)); |
| if (ret < 0) |
| dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg); |
| } |
| |
| static void |
| reg_write16(struct drm_encoder *encoder, uint16_t reg, uint16_t val) |
| { |
| struct i2c_client *client = drm_i2c_encoder_get_client(encoder); |
| uint8_t buf[] = {REG2ADDR(reg), val >> 8, val}; |
| int ret; |
| |
| set_page(encoder, reg); |
| |
| ret = i2c_master_send(client, buf, ARRAY_SIZE(buf)); |
| if (ret < 0) |
| dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg); |
| } |
| |
| static void |
| reg_set(struct drm_encoder *encoder, uint16_t reg, uint8_t val) |
| { |
| reg_write(encoder, reg, reg_read(encoder, reg) | val); |
| } |
| |
| static void |
| reg_clear(struct drm_encoder *encoder, uint16_t reg, uint8_t val) |
| { |
| reg_write(encoder, reg, reg_read(encoder, reg) & ~val); |
| } |
| |
| static void |
| tda998x_reset(struct drm_encoder *encoder) |
| { |
| /* reset audio and i2c master: */ |
| reg_set(encoder, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER); |
| msleep(50); |
| reg_clear(encoder, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER); |
| msleep(50); |
| |
| /* reset transmitter: */ |
| reg_set(encoder, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR); |
| reg_clear(encoder, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR); |
| |
| /* PLL registers common configuration */ |
| reg_write(encoder, REG_PLL_SERIAL_1, 0x00); |
| reg_write(encoder, REG_PLL_SERIAL_2, PLL_SERIAL_2_SRL_NOSC(1)); |
| reg_write(encoder, REG_PLL_SERIAL_3, 0x00); |
| reg_write(encoder, REG_SERIALIZER, 0x00); |
| reg_write(encoder, REG_BUFFER_OUT, 0x00); |
| reg_write(encoder, REG_PLL_SCG1, 0x00); |
| reg_write(encoder, REG_AUDIO_DIV, AUDIO_DIV_SERCLK_8); |
| reg_write(encoder, REG_SEL_CLK, SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK); |
| reg_write(encoder, REG_PLL_SCGN1, 0xfa); |
| reg_write(encoder, REG_PLL_SCGN2, 0x00); |
| reg_write(encoder, REG_PLL_SCGR1, 0x5b); |
| reg_write(encoder, REG_PLL_SCGR2, 0x00); |
| reg_write(encoder, REG_PLL_SCG2, 0x10); |
| |
| /* Write the default value MUX register */ |
| reg_write(encoder, REG_MUX_VP_VIP_OUT, 0x24); |
| } |
| |
| static uint8_t tda998x_cksum(uint8_t *buf, size_t bytes) |
| { |
| uint8_t sum = 0; |
| |
| while (bytes--) |
| sum += *buf++; |
| return (255 - sum) + 1; |
| } |
| |
| #define HB(x) (x) |
| #define PB(x) (HB(2) + 1 + (x)) |
| |
| static void |
| tda998x_write_if(struct drm_encoder *encoder, uint8_t bit, uint16_t addr, |
| uint8_t *buf, size_t size) |
| { |
| buf[PB(0)] = tda998x_cksum(buf, size); |
| |
| reg_clear(encoder, REG_DIP_IF_FLAGS, bit); |
| reg_write_range(encoder, addr, buf, size); |
| reg_set(encoder, REG_DIP_IF_FLAGS, bit); |
| } |
| |
| static void |
| tda998x_write_aif(struct drm_encoder *encoder, struct tda998x_encoder_params *p) |
| { |
| uint8_t buf[PB(5) + 1]; |
| |
| buf[HB(0)] = 0x84; |
| buf[HB(1)] = 0x01; |
| buf[HB(2)] = 10; |
| buf[PB(0)] = 0; |
| buf[PB(1)] = p->audio_frame[1] & 0x07; /* CC */ |
| buf[PB(2)] = p->audio_frame[2] & 0x1c; /* SF */ |
| buf[PB(4)] = p->audio_frame[4]; |
| buf[PB(5)] = p->audio_frame[5] & 0xf8; /* DM_INH + LSV */ |
| |
| tda998x_write_if(encoder, DIP_IF_FLAGS_IF4, REG_IF4_HB0, buf, |
| sizeof(buf)); |
| } |
| |
| static void |
| tda998x_write_avi(struct drm_encoder *encoder, struct drm_display_mode *mode) |
| { |
| uint8_t buf[PB(13) + 1]; |
| |
| memset(buf, 0, sizeof(buf)); |
| buf[HB(0)] = 0x82; |
| buf[HB(1)] = 0x02; |
| buf[HB(2)] = 13; |
| buf[PB(4)] = drm_match_cea_mode(mode); |
| |
| tda998x_write_if(encoder, DIP_IF_FLAGS_IF2, REG_IF2_HB0, buf, |
| sizeof(buf)); |
| } |
| |
| static void tda998x_audio_mute(struct drm_encoder *encoder, bool on) |
| { |
| if (on) { |
| reg_set(encoder, REG_SOFTRESET, SOFTRESET_AUDIO); |
| reg_clear(encoder, REG_SOFTRESET, SOFTRESET_AUDIO); |
| reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO); |
| } else { |
| reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO); |
| } |
| } |
| |
| static void |
| tda998x_configure_audio(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, struct tda998x_encoder_params *p) |
| { |
| uint8_t buf[6], clksel_aip, clksel_fs, ca_i2s, cts_n, adiv; |
| uint32_t n; |
| |
| /* Enable audio ports */ |
| reg_write(encoder, REG_ENA_AP, p->audio_cfg); |
| reg_write(encoder, REG_ENA_ACLK, p->audio_clk_cfg); |
| |
| /* Set audio input source */ |
| switch (p->audio_format) { |
| case AFMT_SPDIF: |
| reg_write(encoder, REG_MUX_AP, 0x40); |
| clksel_aip = AIP_CLKSEL_AIP(0); |
| /* FS64SPDIF */ |
| clksel_fs = AIP_CLKSEL_FS(2); |
| cts_n = CTS_N_M(3) | CTS_N_K(3); |
| ca_i2s = 0; |
| break; |
| |
| case AFMT_I2S: |
| reg_write(encoder, REG_MUX_AP, 0x64); |
| clksel_aip = AIP_CLKSEL_AIP(1); |
| /* ACLK */ |
| clksel_fs = AIP_CLKSEL_FS(0); |
| cts_n = CTS_N_M(3) | CTS_N_K(3); |
| ca_i2s = CA_I2S_CA_I2S(0); |
| break; |
| |
| default: |
| BUG(); |
| return; |
| } |
| |
| reg_write(encoder, REG_AIP_CLKSEL, clksel_aip); |
| reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_LAYOUT); |
| |
| /* Enable automatic CTS generation */ |
| reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_ACR_MAN); |
| reg_write(encoder, REG_CTS_N, cts_n); |
| |
| /* |
| * Audio input somehow depends on HDMI line rate which is |
| * related to pixclk. Testing showed that modes with pixclk |
| * >100MHz need a larger divider while <40MHz need the default. |
| * There is no detailed info in the datasheet, so we just |
| * assume 100MHz requires larger divider. |
| */ |
| if (mode->clock > 100000) |
| adiv = AUDIO_DIV_SERCLK_16; |
| else |
| adiv = AUDIO_DIV_SERCLK_8; |
| reg_write(encoder, REG_AUDIO_DIV, adiv); |
| |
| /* |
| * This is the approximate value of N, which happens to be |
| * the recommended values for non-coherent clocks. |
| */ |
| n = 128 * p->audio_sample_rate / 1000; |
| |
| /* Write the CTS and N values */ |
| buf[0] = 0x44; |
| buf[1] = 0x42; |
| buf[2] = 0x01; |
| buf[3] = n; |
| buf[4] = n >> 8; |
| buf[5] = n >> 16; |
| reg_write_range(encoder, REG_ACR_CTS_0, buf, 6); |
| |
| /* Set CTS clock reference */ |
| reg_write(encoder, REG_AIP_CLKSEL, clksel_aip | clksel_fs); |
| |
| /* Reset CTS generator */ |
| reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS); |
| reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS); |
| |
| /* Write the channel status */ |
| buf[0] = 0x04; |
| buf[1] = 0x00; |
| buf[2] = 0x00; |
| buf[3] = 0xf1; |
| reg_write_range(encoder, REG_CH_STAT_B(0), buf, 4); |
| |
| tda998x_audio_mute(encoder, true); |
| mdelay(20); |
| tda998x_audio_mute(encoder, false); |
| |
| /* Write the audio information packet */ |
| tda998x_write_aif(encoder, p); |
| } |
| |
| /* DRM encoder functions */ |
| |
| static void |
| tda998x_encoder_set_config(struct drm_encoder *encoder, void *params) |
| { |
| struct tda998x_priv *priv = to_tda998x_priv(encoder); |
| struct tda998x_encoder_params *p = params; |
| |
| priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(p->swap_a) | |
| (p->mirr_a ? VIP_CNTRL_0_MIRR_A : 0) | |
| VIP_CNTRL_0_SWAP_B(p->swap_b) | |
| (p->mirr_b ? VIP_CNTRL_0_MIRR_B : 0); |
| priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(p->swap_c) | |
| (p->mirr_c ? VIP_CNTRL_1_MIRR_C : 0) | |
| VIP_CNTRL_1_SWAP_D(p->swap_d) | |
| (p->mirr_d ? VIP_CNTRL_1_MIRR_D : 0); |
| priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(p->swap_e) | |
| (p->mirr_e ? VIP_CNTRL_2_MIRR_E : 0) | |
| VIP_CNTRL_2_SWAP_F(p->swap_f) | |
| (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0); |
| |
| priv->params = *p; |
| } |
| |
| static void |
| tda998x_encoder_dpms(struct drm_encoder *encoder, int mode) |
| { |
| struct tda998x_priv *priv = to_tda998x_priv(encoder); |
| |
| /* we only care about on or off: */ |
| if (mode != DRM_MODE_DPMS_ON) |
| mode = DRM_MODE_DPMS_OFF; |
| |
| if (mode == priv->dpms) |
| return; |
| |
| switch (mode) { |
| case DRM_MODE_DPMS_ON: |
| /* enable video ports, audio will be enabled later */ |
| reg_write(encoder, REG_ENA_VP_0, 0xff); |
| reg_write(encoder, REG_ENA_VP_1, 0xff); |
| reg_write(encoder, REG_ENA_VP_2, 0xff); |
| /* set muxing after enabling ports: */ |
| reg_write(encoder, REG_VIP_CNTRL_0, priv->vip_cntrl_0); |
| reg_write(encoder, REG_VIP_CNTRL_1, priv->vip_cntrl_1); |
| reg_write(encoder, REG_VIP_CNTRL_2, priv->vip_cntrl_2); |
| break; |
| case DRM_MODE_DPMS_OFF: |
| /* disable audio and video ports */ |
| reg_write(encoder, REG_ENA_AP, 0x00); |
| reg_write(encoder, REG_ENA_VP_0, 0x00); |
| reg_write(encoder, REG_ENA_VP_1, 0x00); |
| reg_write(encoder, REG_ENA_VP_2, 0x00); |
| break; |
| } |
| |
| priv->dpms = mode; |
| } |
| |
| static void |
| tda998x_encoder_save(struct drm_encoder *encoder) |
| { |
| DBG(""); |
| } |
| |
| static void |
| tda998x_encoder_restore(struct drm_encoder *encoder) |
| { |
| DBG(""); |
| } |
| |
| static bool |
| tda998x_encoder_mode_fixup(struct drm_encoder *encoder, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| return true; |
| } |
| |
| static int |
| tda998x_encoder_mode_valid(struct drm_encoder *encoder, |
| struct drm_display_mode *mode) |
| { |
| return MODE_OK; |
| } |
| |
| static void |
| tda998x_encoder_mode_set(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct tda998x_priv *priv = to_tda998x_priv(encoder); |
| uint16_t ref_pix, ref_line, n_pix, n_line; |
| uint16_t hs_pix_s, hs_pix_e; |
| uint16_t vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e; |
| uint16_t vs2_pix_s, vs2_pix_e, vs2_line_s, vs2_line_e; |
| uint16_t vwin1_line_s, vwin1_line_e; |
| uint16_t vwin2_line_s, vwin2_line_e; |
| uint16_t de_pix_s, de_pix_e; |
| uint8_t reg, div, rep; |
| |
| /* |
| * Internally TDA998x is using ITU-R BT.656 style sync but |
| * we get VESA style sync. TDA998x is using a reference pixel |
| * relative to ITU to sync to the input frame and for output |
| * sync generation. Currently, we are using reference detection |
| * from HS/VS, i.e. REFPIX/REFLINE denote frame start sync point |
| * which is position of rising VS with coincident rising HS. |
| * |
| * Now there is some issues to take care of: |
| * - HDMI data islands require sync-before-active |
| * - TDA998x register values must be > 0 to be enabled |
| * - REFLINE needs an additional offset of +1 |
| * - REFPIX needs an addtional offset of +1 for UYUV and +3 for RGB |
| * |
| * So we add +1 to all horizontal and vertical register values, |
| * plus an additional +3 for REFPIX as we are using RGB input only. |
| */ |
| n_pix = mode->htotal; |
| n_line = mode->vtotal; |
| |
| hs_pix_e = mode->hsync_end - mode->hdisplay; |
| hs_pix_s = mode->hsync_start - mode->hdisplay; |
| de_pix_e = mode->htotal; |
| de_pix_s = mode->htotal - mode->hdisplay; |
| ref_pix = 3 + hs_pix_s; |
| |
| /* |
| * Attached LCD controllers may generate broken sync. Allow |
| * those to adjust the position of the rising VS edge by adding |
| * HSKEW to ref_pix. |
| */ |
| if (adjusted_mode->flags & DRM_MODE_FLAG_HSKEW) |
| ref_pix += adjusted_mode->hskew; |
| |
| if ((mode->flags & DRM_MODE_FLAG_INTERLACE) == 0) { |
| ref_line = 1 + mode->vsync_start - mode->vdisplay; |
| vwin1_line_s = mode->vtotal - mode->vdisplay - 1; |
| vwin1_line_e = vwin1_line_s + mode->vdisplay; |
| vs1_pix_s = vs1_pix_e = hs_pix_s; |
| vs1_line_s = mode->vsync_start - mode->vdisplay; |
| vs1_line_e = vs1_line_s + |
| mode->vsync_end - mode->vsync_start; |
| vwin2_line_s = vwin2_line_e = 0; |
| vs2_pix_s = vs2_pix_e = 0; |
| vs2_line_s = vs2_line_e = 0; |
| } else { |
| ref_line = 1 + (mode->vsync_start - mode->vdisplay)/2; |
| vwin1_line_s = (mode->vtotal - mode->vdisplay)/2; |
| vwin1_line_e = vwin1_line_s + mode->vdisplay/2; |
| vs1_pix_s = vs1_pix_e = hs_pix_s; |
| vs1_line_s = (mode->vsync_start - mode->vdisplay)/2; |
| vs1_line_e = vs1_line_s + |
| (mode->vsync_end - mode->vsync_start)/2; |
| vwin2_line_s = vwin1_line_s + mode->vtotal/2; |
| vwin2_line_e = vwin2_line_s + mode->vdisplay/2; |
| vs2_pix_s = vs2_pix_e = hs_pix_s + mode->htotal/2; |
| vs2_line_s = vs1_line_s + mode->vtotal/2 ; |
| vs2_line_e = vs2_line_s + |
| (mode->vsync_end - mode->vsync_start)/2; |
| } |
| |
| div = 148500 / mode->clock; |
| |
| /* mute the audio FIFO: */ |
| reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO); |
| |
| /* set HDMI HDCP mode off: */ |
| reg_set(encoder, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS); |
| reg_clear(encoder, REG_TX33, TX33_HDMI); |
| |
| reg_write(encoder, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(0)); |
| /* no pre-filter or interpolator: */ |
| reg_write(encoder, REG_HVF_CNTRL_0, HVF_CNTRL_0_PREFIL(0) | |
| HVF_CNTRL_0_INTPOL(0)); |
| reg_write(encoder, REG_VIP_CNTRL_5, VIP_CNTRL_5_SP_CNT(0)); |
| reg_write(encoder, REG_VIP_CNTRL_4, VIP_CNTRL_4_BLANKIT(0) | |
| VIP_CNTRL_4_BLC(0)); |
| reg_clear(encoder, REG_PLL_SERIAL_3, PLL_SERIAL_3_SRL_CCIR); |
| |
| reg_clear(encoder, REG_PLL_SERIAL_1, PLL_SERIAL_1_SRL_MAN_IZ); |
| reg_clear(encoder, REG_PLL_SERIAL_3, PLL_SERIAL_3_SRL_DE); |
| reg_write(encoder, REG_SERIALIZER, 0); |
| reg_write(encoder, REG_HVF_CNTRL_1, HVF_CNTRL_1_VQR(0)); |
| |
| /* TODO enable pixel repeat for pixel rates less than 25Msamp/s */ |
| rep = 0; |
| reg_write(encoder, REG_RPT_CNTRL, 0); |
| reg_write(encoder, REG_SEL_CLK, SEL_CLK_SEL_VRF_CLK(0) | |
| SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK); |
| |
| reg_write(encoder, REG_PLL_SERIAL_2, PLL_SERIAL_2_SRL_NOSC(div) | |
| PLL_SERIAL_2_SRL_PR(rep)); |
| |
| /* set color matrix bypass flag: */ |
| reg_set(encoder, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP); |
| |
| /* set BIAS tmds value: */ |
| reg_write(encoder, REG_ANA_GENERAL, 0x09); |
| |
| reg_clear(encoder, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_MTHD); |
| |
| /* |
| * Sync on rising HSYNC/VSYNC |
| */ |
| reg_write(encoder, REG_VIP_CNTRL_3, 0); |
| reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_SYNC_HS); |
| |
| /* |
| * TDA19988 requires high-active sync at input stage, |
| * so invert low-active sync provided by master encoder here |
| */ |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_H_TGL); |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_V_TGL); |
| |
| /* |
| * Always generate sync polarity relative to input sync and |
| * revert input stage toggled sync at output stage |
| */ |
| reg = TBG_CNTRL_1_TGL_EN; |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| reg |= TBG_CNTRL_1_H_TGL; |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| reg |= TBG_CNTRL_1_V_TGL; |
| reg_write(encoder, REG_TBG_CNTRL_1, reg); |
| |
| reg_write(encoder, REG_VIDFORMAT, 0x00); |
| reg_write16(encoder, REG_REFPIX_MSB, ref_pix); |
| reg_write16(encoder, REG_REFLINE_MSB, ref_line); |
| reg_write16(encoder, REG_NPIX_MSB, n_pix); |
| reg_write16(encoder, REG_NLINE_MSB, n_line); |
| reg_write16(encoder, REG_VS_LINE_STRT_1_MSB, vs1_line_s); |
| reg_write16(encoder, REG_VS_PIX_STRT_1_MSB, vs1_pix_s); |
| reg_write16(encoder, REG_VS_LINE_END_1_MSB, vs1_line_e); |
| reg_write16(encoder, REG_VS_PIX_END_1_MSB, vs1_pix_e); |
| reg_write16(encoder, REG_VS_LINE_STRT_2_MSB, vs2_line_s); |
| reg_write16(encoder, REG_VS_PIX_STRT_2_MSB, vs2_pix_s); |
| reg_write16(encoder, REG_VS_LINE_END_2_MSB, vs2_line_e); |
| reg_write16(encoder, REG_VS_PIX_END_2_MSB, vs2_pix_e); |
| reg_write16(encoder, REG_HS_PIX_START_MSB, hs_pix_s); |
| reg_write16(encoder, REG_HS_PIX_STOP_MSB, hs_pix_e); |
| reg_write16(encoder, REG_VWIN_START_1_MSB, vwin1_line_s); |
| reg_write16(encoder, REG_VWIN_END_1_MSB, vwin1_line_e); |
| reg_write16(encoder, REG_VWIN_START_2_MSB, vwin2_line_s); |
| reg_write16(encoder, REG_VWIN_END_2_MSB, vwin2_line_e); |
| reg_write16(encoder, REG_DE_START_MSB, de_pix_s); |
| reg_write16(encoder, REG_DE_STOP_MSB, de_pix_e); |
| |
| if (priv->rev == TDA19988) { |
| /* let incoming pixels fill the active space (if any) */ |
| reg_write(encoder, REG_ENABLE_SPACE, 0x01); |
| } |
| |
| /* must be last register set: */ |
| reg_clear(encoder, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_ONCE); |
| |
| /* Only setup the info frames if the sink is HDMI */ |
| if (priv->is_hdmi_sink) { |
| /* We need to turn HDMI HDCP stuff on to get audio through */ |
| reg_clear(encoder, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS); |
| reg_write(encoder, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(1)); |
| reg_set(encoder, REG_TX33, TX33_HDMI); |
| |
| tda998x_write_avi(encoder, adjusted_mode); |
| |
| if (priv->params.audio_cfg) |
| tda998x_configure_audio(encoder, adjusted_mode, |
| &priv->params); |
| } |
| } |
| |
| static enum drm_connector_status |
| tda998x_encoder_detect(struct drm_encoder *encoder, |
| struct drm_connector *connector) |
| { |
| uint8_t val = cec_read(encoder, REG_CEC_RXSHPDLEV); |
| return (val & CEC_RXSHPDLEV_HPD) ? connector_status_connected : |
| connector_status_disconnected; |
| } |
| |
| static int |
| read_edid_block(struct drm_encoder *encoder, uint8_t *buf, int blk) |
| { |
| uint8_t offset, segptr; |
| int ret, i; |
| |
| /* enable EDID read irq: */ |
| reg_set(encoder, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD); |
| |
| offset = (blk & 1) ? 128 : 0; |
| segptr = blk / 2; |
| |
| reg_write(encoder, REG_DDC_ADDR, 0xa0); |
| reg_write(encoder, REG_DDC_OFFS, offset); |
| reg_write(encoder, REG_DDC_SEGM_ADDR, 0x60); |
| reg_write(encoder, REG_DDC_SEGM, segptr); |
| |
| /* enable reading EDID: */ |
| reg_write(encoder, REG_EDID_CTRL, 0x1); |
| |
| /* flag must be cleared by sw: */ |
| reg_write(encoder, REG_EDID_CTRL, 0x0); |
| |
| /* wait for block read to complete: */ |
| for (i = 100; i > 0; i--) { |
| uint8_t val = reg_read(encoder, REG_INT_FLAGS_2); |
| if (val & INT_FLAGS_2_EDID_BLK_RD) |
| break; |
| msleep(1); |
| } |
| |
| if (i == 0) |
| return -ETIMEDOUT; |
| |
| ret = reg_read_range(encoder, REG_EDID_DATA_0, buf, EDID_LENGTH); |
| if (ret != EDID_LENGTH) { |
| dev_err(encoder->dev->dev, "failed to read edid block %d: %d", |
| blk, ret); |
| return ret; |
| } |
| |
| reg_clear(encoder, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD); |
| |
| return 0; |
| } |
| |
| static uint8_t * |
| do_get_edid(struct drm_encoder *encoder) |
| { |
| struct tda998x_priv *priv = to_tda998x_priv(encoder); |
| int j = 0, valid_extensions = 0; |
| uint8_t *block, *new; |
| bool print_bad_edid = drm_debug & DRM_UT_KMS; |
| |
| if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL) |
| return NULL; |
| |
| if (priv->rev == TDA19988) |
| reg_clear(encoder, REG_TX4, TX4_PD_RAM); |
| |
| /* base block fetch */ |
| if (read_edid_block(encoder, block, 0)) |
| goto fail; |
| |
| if (!drm_edid_block_valid(block, 0, print_bad_edid)) |
| goto fail; |
| |
| /* if there's no extensions, we're done */ |
| if (block[0x7e] == 0) |
| goto done; |
| |
| new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL); |
| if (!new) |
| goto fail; |
| block = new; |
| |
| for (j = 1; j <= block[0x7e]; j++) { |
| uint8_t *ext_block = block + (valid_extensions + 1) * EDID_LENGTH; |
| if (read_edid_block(encoder, ext_block, j)) |
| goto fail; |
| |
| if (!drm_edid_block_valid(ext_block, j, print_bad_edid)) |
| goto fail; |
| |
| valid_extensions++; |
| } |
| |
| if (valid_extensions != block[0x7e]) { |
| block[EDID_LENGTH-1] += block[0x7e] - valid_extensions; |
| block[0x7e] = valid_extensions; |
| new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL); |
| if (!new) |
| goto fail; |
| block = new; |
| } |
| |
| done: |
| if (priv->rev == TDA19988) |
| reg_set(encoder, REG_TX4, TX4_PD_RAM); |
| |
| return block; |
| |
| fail: |
| if (priv->rev == TDA19988) |
| reg_set(encoder, REG_TX4, TX4_PD_RAM); |
| dev_warn(encoder->dev->dev, "failed to read EDID\n"); |
| kfree(block); |
| return NULL; |
| } |
| |
| static int |
| tda998x_encoder_get_modes(struct drm_encoder *encoder, |
| struct drm_connector *connector) |
| { |
| struct tda998x_priv *priv = to_tda998x_priv(encoder); |
| struct edid *edid = (struct edid *)do_get_edid(encoder); |
| int n = 0; |
| |
| if (edid) { |
| drm_mode_connector_update_edid_property(connector, edid); |
| n = drm_add_edid_modes(connector, edid); |
| priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid); |
| kfree(edid); |
| } |
| |
| return n; |
| } |
| |
| static int |
| tda998x_encoder_create_resources(struct drm_encoder *encoder, |
| struct drm_connector *connector) |
| { |
| DBG(""); |
| return 0; |
| } |
| |
| static int |
| tda998x_encoder_set_property(struct drm_encoder *encoder, |
| struct drm_connector *connector, |
| struct drm_property *property, |
| uint64_t val) |
| { |
| DBG(""); |
| return 0; |
| } |
| |
| static void |
| tda998x_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct tda998x_priv *priv = to_tda998x_priv(encoder); |
| drm_i2c_encoder_destroy(encoder); |
| kfree(priv); |
| } |
| |
| static struct drm_encoder_slave_funcs tda998x_encoder_funcs = { |
| .set_config = tda998x_encoder_set_config, |
| .destroy = tda998x_encoder_destroy, |
| .dpms = tda998x_encoder_dpms, |
| .save = tda998x_encoder_save, |
| .restore = tda998x_encoder_restore, |
| .mode_fixup = tda998x_encoder_mode_fixup, |
| .mode_valid = tda998x_encoder_mode_valid, |
| .mode_set = tda998x_encoder_mode_set, |
| .detect = tda998x_encoder_detect, |
| .get_modes = tda998x_encoder_get_modes, |
| .create_resources = tda998x_encoder_create_resources, |
| .set_property = tda998x_encoder_set_property, |
| }; |
| |
| /* I2C driver functions */ |
| |
| static int |
| tda998x_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| { |
| return 0; |
| } |
| |
| static int |
| tda998x_remove(struct i2c_client *client) |
| { |
| return 0; |
| } |
| |
| static int |
| tda998x_encoder_init(struct i2c_client *client, |
| struct drm_device *dev, |
| struct drm_encoder_slave *encoder_slave) |
| { |
| struct drm_encoder *encoder = &encoder_slave->base; |
| struct tda998x_priv *priv; |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3); |
| priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1); |
| priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5); |
| |
| priv->current_page = 0; |
| priv->cec = i2c_new_dummy(client->adapter, 0x34); |
| priv->dpms = DRM_MODE_DPMS_OFF; |
| |
| encoder_slave->slave_priv = priv; |
| encoder_slave->slave_funcs = &tda998x_encoder_funcs; |
| |
| /* wake up the device: */ |
| cec_write(encoder, REG_CEC_ENAMODS, |
| CEC_ENAMODS_EN_RXSENS | CEC_ENAMODS_EN_HDMI); |
| |
| tda998x_reset(encoder); |
| |
| /* read version: */ |
| priv->rev = reg_read(encoder, REG_VERSION_LSB) | |
| reg_read(encoder, REG_VERSION_MSB) << 8; |
| |
| /* mask off feature bits: */ |
| priv->rev &= ~0x30; /* not-hdcp and not-scalar bit */ |
| |
| switch (priv->rev) { |
| case TDA9989N2: dev_info(dev->dev, "found TDA9989 n2"); break; |
| case TDA19989: dev_info(dev->dev, "found TDA19989"); break; |
| case TDA19989N2: dev_info(dev->dev, "found TDA19989 n2"); break; |
| case TDA19988: dev_info(dev->dev, "found TDA19988"); break; |
| default: |
| DBG("found unsupported device: %04x", priv->rev); |
| goto fail; |
| } |
| |
| /* after reset, enable DDC: */ |
| reg_write(encoder, REG_DDC_DISABLE, 0x00); |
| |
| /* set clock on DDC channel: */ |
| reg_write(encoder, REG_TX3, 39); |
| |
| /* if necessary, disable multi-master: */ |
| if (priv->rev == TDA19989) |
| reg_set(encoder, REG_I2C_MASTER, I2C_MASTER_DIS_MM); |
| |
| cec_write(encoder, REG_CEC_FRO_IM_CLK_CTRL, |
| CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL); |
| |
| return 0; |
| |
| fail: |
| /* if encoder_init fails, the encoder slave is never registered, |
| * so cleanup here: |
| */ |
| if (priv->cec) |
| i2c_unregister_device(priv->cec); |
| kfree(priv); |
| encoder_slave->slave_priv = NULL; |
| encoder_slave->slave_funcs = NULL; |
| return -ENXIO; |
| } |
| |
| static struct i2c_device_id tda998x_ids[] = { |
| { "tda998x", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tda998x_ids); |
| |
| static struct drm_i2c_encoder_driver tda998x_driver = { |
| .i2c_driver = { |
| .probe = tda998x_probe, |
| .remove = tda998x_remove, |
| .driver = { |
| .name = "tda998x", |
| }, |
| .id_table = tda998x_ids, |
| }, |
| .encoder_init = tda998x_encoder_init, |
| }; |
| |
| /* Module initialization */ |
| |
| static int __init |
| tda998x_init(void) |
| { |
| DBG(""); |
| return drm_i2c_encoder_register(THIS_MODULE, &tda998x_driver); |
| } |
| |
| static void __exit |
| tda998x_exit(void) |
| { |
| DBG(""); |
| drm_i2c_encoder_unregister(&tda998x_driver); |
| } |
| |
| MODULE_AUTHOR("Rob Clark <robdclark@gmail.com"); |
| MODULE_DESCRIPTION("NXP Semiconductors TDA998X HDMI Encoder"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(tda998x_init); |
| module_exit(tda998x_exit); |