drivers/usb/serial/Kconfig - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 #
 # USB Serial device configuration
 #

 menu "USB Serial Converter support"
 	depends on USB!=n

 config USB_SERIAL
 	tristate "USB Serial Converter support"
 	depends on USB
 	---help---
 	  Say Y here if you have a USB device that provides normal serial
 	  ports, or acts like a serial device, and you want to connect it to
 	  your USB bus.

 	  Please read <file:Documentation/usb/usb-serial.txt> for more
 	  information on the specifics of the different devices that are
 	  supported, and on how to use them.

 	  To compile this driver as a module, choose M here: the
 	  module will be called usbserial.

 config USB_SERIAL_CONSOLE
 	bool "USB Serial Console device support (EXPERIMENTAL)"
 	depends on USB_SERIAL=y && EXPERIMENTAL
 	---help---
 	  If you say Y here, it will be possible to use a USB to serial
 	  converter port as the system console (the system console is the
 	  device which receives all kernel messages and warnings and which
 	  allows logins in single user mode). This could be useful if some
 	  terminal or printer is connected to that serial port.

 	  Even if you say Y here, the currently visible virtual console
 	  (/dev/tty0) will still be used as the system console by default, but
 	  you can alter that using a kernel command line option such as
 	  "console=ttyUSB0". (Try "man bootparam" or see the documentation of
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)

 	  If you don't have a VGA card installed and you say Y here, the
 	  kernel will automatically use the first USB to serial converter
 	  port, /dev/ttyUSB0, as system console.

 	  If unsure, say N.

 config USB_SERIAL_GENERIC
 	bool "USB Generic Serial Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use the generic USB serial driver.  Please
 	  read <file:Documentation/usb/usb-serial.txt> for more information on
 	  using this driver.  It is recommended that the "USB Serial converter
 	  support" be compiled as a module for this driver to be used
 	  properly.

 config USB_SERIAL_AIRPRIME
 	tristate "USB AirPrime CDMA Wireless Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use a AirPrime CDMA Wireless PC card.

 	  To compile this driver as a module, choose M here: the
 	  module will be called airprime.

 config USB_SERIAL_ANYDATA
 	tristate "USB AnyData CDMA Wireless Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use a AnyData CDMA device.

 	  To compile this driver as a module, choose M here: the
 	  module will be called anydata.

 config USB_SERIAL_BELKIN
 	tristate "USB Belkin and Peracom Single Port Serial Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use a Belkin USB Serial single port
 	  adaptor (F5U103 is one of the model numbers) or the Peracom single
 	  port USB to serial adapter.

 	  To compile this driver as a module, choose M here: the
 	  module will be called belkin_sa.

 config USB_SERIAL_WHITEHEAT
 	tristate "USB ConnectTech WhiteHEAT Serial Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
 	  USB to serial converter device.

 	  To compile this driver as a module, choose M here: the
 	  module will be called whiteheat.

 config USB_SERIAL_DIGI_ACCELEPORT
 	tristate "USB Digi International AccelePort USB Serial Driver"
 	depends on USB_SERIAL
 	---help---
 	  Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 	  2 port (plus parallel port) and 4 port USB serial converters.  The
 	  parallel port on the USB 2 appears as a third serial port on Linux.
 	  The Digi Acceleport USB 8 is not yet supported by this driver.

 	  This driver works under SMP with the usb-uhci driver.  It does not
 	  work under SMP with the uhci driver.

 	  To compile this driver as a module, choose M here: the
 	  module will be called digi_acceleport.

 config USB_SERIAL_CP2101
 	tristate "USB CP2101 UART Bridge Controller"
 	depends on USB_SERIAL && EXPERIMENTAL
 	help
 	  Say Y here if you want to use a CP2101/CP2102 based USB to RS232
 	  converter.

 	  To compile this driver as a module, choose M here: the
 	  module will be called cp2101.

 config USB_SERIAL_CYPRESS_M8
 	tristate "USB Cypress M8 USB Serial Driver"
 	depends on USB_SERIAL && EXPERIMENTAL
 	help
 	  Say Y here if you want to use a device that contains the Cypress
 	  USB to Serial microcontroller, such as the DeLorme Earthmate GPS.

 		Attempted SMP support... send bug reports!

 	  Supported microcontrollers in the CY4601 family are:
 		CY7C63741 CY7C63742 CY7C63743 CY7C64013

 	  To compile this driver as a module, choose M here: the
 	  module will be called cypress_m8.

 config USB_SERIAL_EMPEG
 	tristate "USB Empeg empeg-car Mark I/II Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 	  mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 	  device node.  See <file:Documentation/usb/usb-serial.txt> for more
 	  tidbits of information.

 	  To compile this driver as a module, choose M here: the
 	  module will be called empeg.

 config USB_SERIAL_FTDI_SIO
 	tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
 	---help---
 	  Say Y here if you want to use a FTDI SIO single port USB to serial
 	  converter device. The implementation I have is called the USC-1000.
 	  This driver has also be tested with the 245 and 232 devices.

 	  See <http://ftdi-usb-sio.sourceforge.net/> for more
 	  information on this driver and the device.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ftdi_sio.

 config USB_SERIAL_FUNSOFT
 	tristate "USB Fundamental Software Dongle Driver"
 	depends on USB_SERIAL
 	---help---
 	  Say Y here if you want to use the Fundamental Software dongle.

 	  To compile this driver as a module, choose M here: the
 	  module will be called funsoft.

 config USB_SERIAL_VISOR
 	tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to connect to your HandSpring Visor, Palm
 	  m500 or m505 through its USB docking station. See
 	  <http://usbvisor.sourceforge.net/> for more information on using this
 	  driver.

 	  To compile this driver as a module, choose M here: the
 	  module will be called visor.

 config USB_SERIAL_IPAQ
 	tristate "USB PocketPC PDA Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 	  or any other PDA running Windows CE 3.0 or PocketPC 2002
 	  using a USB cradle/cable. For information on using the driver,
 	  read <file:Documentation/usb/usb-serial.txt>.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ipaq.

 config USB_SERIAL_IR
 	tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
 	help
 	  Say Y here if you want to enable simple serial support for USB IrDA
 	  devices.  This is useful if you do not want to use the full IrDA
 	  stack.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ir-usb.

 config USB_SERIAL_EDGEPORT
 	tristate "USB Inside Out Edgeport Serial Driver"
 	depends on USB_SERIAL
 	---help---
 	  Say Y here if you want to use any of the following devices from
 	  Inside Out Networks (Digi):
 	  Edgeport/4
 	  Rapidport/4
 	  Edgeport/4t
 	  Edgeport/2
 	  Edgeport/4i
 	  Edgeport/2i
 	  Edgeport/421
 	  Edgeport/21
 	  Edgeport/8
 	  Edgeport/8 Dual
 	  Edgeport/2D8
 	  Edgeport/4D8
 	  Edgeport/8i
 	  Edgeport/2 DIN
 	  Edgeport/4 DIN
 	  Edgeport/16 Dual

 	  To compile this driver as a module, choose M here: the
 	  module will be called io_edgeport.

 config USB_SERIAL_EDGEPORT_TI
 	tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use any of the devices from Inside Out
 	  Networks (Digi) that are not supported by the io_edgeport driver.
 	  This includes the Edgeport/1 device.

 	  To compile this driver as a module, choose M here: the
 	  module will be called io_ti.

 config USB_SERIAL_GARMIN
        tristate "USB Garmin GPS driver"
        depends on USB_SERIAL
        help
          Say Y here if you want to connect to your Garmin GPS.
          Should work with most Garmin GPS devices which have a native USB port.

          See <http://sourceforge.net/projects/garmin-gps> for the latest
          version of the driver.

          To compile this driver as a module, choose M here: the
          module will be called garmin_gps.

 config USB_SERIAL_IPW
         tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
 	help
 	  Say Y here if you want to use a IPWireless USB modem such as
 	  the ones supplied by Axity3G/Sentech South Africa.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ipw.

 config USB_SERIAL_KEYSPAN_PDA
 	tristate "USB Keyspan PDA Single Port Serial Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use a Keyspan PDA single port USB to
 	  serial converter device.  This driver makes use of firmware
 	  developed from scratch by Brian Warner.

 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan_pda.

 config USB_SERIAL_KEYSPAN
 	tristate "USB Keyspan USA-xxx Serial Driver"
 	depends on USB_SERIAL
 	---help---
 	  Say Y here if you want to use Keyspan USB to serial converter
 	  devices.  This driver makes use of Keyspan's official firmware
 	  and was developed with their support.  You must also include
 	  firmware to support your particular device(s).

 	  See <http://misc.nu/hugh/keyspan.html> for more information.

 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan.

 config USB_SERIAL_KEYSPAN_MPR
 	bool "USB Keyspan MPR Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the Keyspan MPR converter.

 config USB_SERIAL_KEYSPAN_USA28
 	bool "USB Keyspan USA-28 Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-28 converter.

 config USB_SERIAL_KEYSPAN_USA28X
 	bool "USB Keyspan USA-28X Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-28X converter.
 	  Be sure you have a USA-28X, there are also 28XA and 28XB
 	  models, the label underneath has the actual part number.

 config USB_SERIAL_KEYSPAN_USA28XA
 	bool "USB Keyspan USA-28XA Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-28XA converter.
 	  Be sure you have a USA-28XA, there are also 28X and 28XB
 	  models, the label underneath has the actual part number.

 config USB_SERIAL_KEYSPAN_USA28XB
 	bool "USB Keyspan USA-28XB Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-28XB converter.
 	  Be sure you have a USA-28XB, there are also 28X and 28XA
 	  models, the label underneath has the actual part number.

 config USB_SERIAL_KEYSPAN_USA19
 	bool "USB Keyspan USA-19 Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-19 converter.

 config USB_SERIAL_KEYSPAN_USA18X
 	bool "USB Keyspan USA-18X Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-18X converter.

 config USB_SERIAL_KEYSPAN_USA19W
 	bool "USB Keyspan USA-19W Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-19W converter.

 config USB_SERIAL_KEYSPAN_USA19QW
 	bool "USB Keyspan USA-19QW Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-19QW converter.

 config USB_SERIAL_KEYSPAN_USA19QI
 	bool "USB Keyspan USA-19QI Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-19QI converter.

 config USB_SERIAL_KEYSPAN_USA49W
 	bool "USB Keyspan USA-49W Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-49W converter.

 config USB_SERIAL_KEYSPAN_USA49WLC
 	bool "USB Keyspan USA-49WLC Firmware"
 	depends on USB_SERIAL_KEYSPAN
 	help
 	  Say Y here to include firmware for the USA-49WLC converter.

 config USB_SERIAL_KLSI
 	tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
 	---help---
 	  Say Y here if you want to use a KL5KUSB105 - based single port
 	  serial adapter. The most widely known -- and currently the only
 	  tested -- device in this category is the PalmConnect USB Serial
 	  adapter sold by Palm Inc. for use with their Palm III and Palm V
 	  series PDAs.

 	  Please read <file:Documentation/usb/usb-serial.txt> for more
 	  information.

 	  To compile this driver as a module, choose M here: the
 	  module will be called kl5kusb105.

 config USB_SERIAL_KOBIL_SCT
         tristate "USB KOBIL chipcard reader"
         depends on USB_SERIAL
         ---help---
           Say Y here if you want to use one of the following KOBIL USB chipcard
           readers:

             - USB TWIN
             - KAAN Standard Plus
             - KAAN SIM
             - SecOVID Reader Plus
             - B1 Professional
             - KAAN Professional

           Note that you need a current CT-API.
           To compile this driver as a module, choose M here: the
 	  module will be called kobil_sct.

 config USB_SERIAL_MCT_U232
 	tristate "USB MCT Single Port Serial Driver"
 	depends on USB_SERIAL
 	---help---
 	  Say Y here if you want to use a USB Serial single port adapter from
 	  Magic Control Technology Corp. (U232 is one of the model numbers).

 	  This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 	  BAY devices.

 	  To compile this driver as a module, choose M here: the
 	  module will be called mct_u232.

 config USB_SERIAL_NAVMAN
 	tristate "USB Navman GPS device"
 	depends on USB_SERIAL
 	help
 	  To compile this driver as a module, choose M here: the
 	  module will be called navman.

 config USB_SERIAL_PL2303
 	tristate "USB Prolific 2303 Single Port Serial Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use the PL2303 USB Serial single port
 	  adapter from Prolific.

 	  To compile this driver as a module, choose M here: the
 	  module will be called pl2303.

 config USB_SERIAL_HP4X
         tristate "USB HP4x Calculators support"
         depends on USB_SERIAL
         help
           Say Y here if you want to use an Hewlett-Packard 4x Calculator.

           To compile this driver as a module, choose M here: the
           module will be called hp4x.

 config USB_SERIAL_SAFE
 	tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL

 config USB_SERIAL_SAFE_PADDED
 	bool "USB Secure Encapsulated Driver - Padded"
 	depends on USB_SERIAL_SAFE

 config USB_SERIAL_TI
 	tristate "USB TI 3410/5052 Serial Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use the TI USB 3410 or 5052
 	  serial devices.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ti_usb_3410_5052.

 config USB_SERIAL_CYBERJACK
 	tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
 	---help---
 	  Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 	  reader. This is an interface to ISO 7816 compatible contactbased
 	  chipcards, e.g. GSM SIMs.

 	  To compile this driver as a module, choose M here: the
 	  module will be called cyberjack.

 	  If unsure, say N.

 config USB_SERIAL_XIRCOM
 	tristate "USB Xircom / Entregra Single Port Serial Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to use a Xircom or Entregra single port USB to
 	  serial converter device.  This driver makes use of firmware
 	  developed from scratch by Brian Warner.

 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan_pda.

 config USB_SERIAL_OPTION
 	tristate "USB Option PCMCIA serial driver"
 	depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
 	help
 	  Say Y here if you want to use an Option card. This is a
 	  GSM card, controlled by three serial ports which are connected
 	  via an OHCI adapter located on a PC card.

 	  To compile this driver as a module, choose M here: the
 	  module will be called option.

 config USB_SERIAL_OMNINET
 	tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
 	help
 	  Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.

 	  To compile this driver as a module, choose M here: the
 	  module will be called omninet.

 config USB_EZUSB
 	bool
 	depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
 	default y

 endmenu
	#
	# USB Serial device configuration
	#

	menu "USB Serial Converter support"
	depends on USB!=n

	config USB_SERIAL
	tristate "USB Serial Converter support"
	depends on USB
	---help---
	Say Y here if you have a USB device that provides normal serial
	ports, or acts like a serial device, and you want to connect it to
	your USB bus.

	Please read <file:Documentation/usb/usb-serial.txt> for more
	information on the specifics of the different devices that are
	supported, and on how to use them.

	To compile this driver as a module, choose M here: the
	module will be called usbserial.

	config USB_SERIAL_CONSOLE
	bool "USB Serial Console device support (EXPERIMENTAL)"
	depends on USB_SERIAL=y && EXPERIMENTAL
	---help---
	If you say Y here, it will be possible to use a USB to serial
	converter port as the system console (the system console is the
	device which receives all kernel messages and warnings and which
	allows logins in single user mode). This could be useful if some
	terminal or printer is connected to that serial port.

	Even if you say Y here, the currently visible virtual console
	(/dev/tty0) will still be used as the system console by default, but
	you can alter that using a kernel command line option such as
	"console=ttyUSB0". (Try "man bootparam" or see the documentation of
	your boot loader (lilo or loadlin) about how to pass options to the
	kernel at boot time.)

	If you don't have a VGA card installed and you say Y here, the
	kernel will automatically use the first USB to serial converter
	port, /dev/ttyUSB0, as system console.

	If unsure, say N.

	config USB_SERIAL_GENERIC
	bool "USB Generic Serial Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use the generic USB serial driver. Please
	read <file:Documentation/usb/usb-serial.txt> for more information on
	using this driver. It is recommended that the "USB Serial converter
	support" be compiled as a module for this driver to be used
	properly.

	config USB_SERIAL_AIRPRIME
	tristate "USB AirPrime CDMA Wireless Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use a AirPrime CDMA Wireless PC card.

	To compile this driver as a module, choose M here: the
	module will be called airprime.

	config USB_SERIAL_ANYDATA
	tristate "USB AnyData CDMA Wireless Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use a AnyData CDMA device.

	To compile this driver as a module, choose M here: the
	module will be called anydata.

	config USB_SERIAL_BELKIN
	tristate "USB Belkin and Peracom Single Port Serial Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use a Belkin USB Serial single port
	adaptor (F5U103 is one of the model numbers) or the Peracom single
	port USB to serial adapter.

	To compile this driver as a module, choose M here: the
	module will be called belkin_sa.

	config USB_SERIAL_WHITEHEAT
	tristate "USB ConnectTech WhiteHEAT Serial Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
	USB to serial converter device.

	To compile this driver as a module, choose M here: the
	module will be called whiteheat.

	config USB_SERIAL_DIGI_ACCELEPORT
	tristate "USB Digi International AccelePort USB Serial Driver"
	depends on USB_SERIAL
	---help---
	Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
	2 port (plus parallel port) and 4 port USB serial converters. The
	parallel port on the USB 2 appears as a third serial port on Linux.
	The Digi Acceleport USB 8 is not yet supported by this driver.

	This driver works under SMP with the usb-uhci driver. It does not
	work under SMP with the uhci driver.

	To compile this driver as a module, choose M here: the
	module will be called digi_acceleport.

	config USB_SERIAL_CP2101
	tristate "USB CP2101 UART Bridge Controller"
	depends on USB_SERIAL && EXPERIMENTAL
	help
	Say Y here if you want to use a CP2101/CP2102 based USB to RS232
	converter.

	To compile this driver as a module, choose M here: the
	module will be called cp2101.

	config USB_SERIAL_CYPRESS_M8
	tristate "USB Cypress M8 USB Serial Driver"
	depends on USB_SERIAL && EXPERIMENTAL
	help
	Say Y here if you want to use a device that contains the Cypress
	USB to Serial microcontroller, such as the DeLorme Earthmate GPS.

	Attempted SMP support... send bug reports!

	Supported microcontrollers in the CY4601 family are:
	CY7C63741 CY7C63742 CY7C63743 CY7C64013

	To compile this driver as a module, choose M here: the
	module will be called cypress_m8.

	config USB_SERIAL_EMPEG
	tristate "USB Empeg empeg-car Mark I/II Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to connect to your Empeg empeg-car Mark I/II
	mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
	device node. See <file:Documentation/usb/usb-serial.txt> for more
	tidbits of information.

	To compile this driver as a module, choose M here: the
	module will be called empeg.

	config USB_SERIAL_FTDI_SIO
	tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
	depends on USB_SERIAL && EXPERIMENTAL
	---help---
	Say Y here if you want to use a FTDI SIO single port USB to serial
	converter device. The implementation I have is called the USC-1000.
	This driver has also be tested with the 245 and 232 devices.

	See <http://ftdi-usb-sio.sourceforge.net/> for more
	information on this driver and the device.

	To compile this driver as a module, choose M here: the
	module will be called ftdi_sio.

	config USB_SERIAL_FUNSOFT
	tristate "USB Fundamental Software Dongle Driver"
	depends on USB_SERIAL
	---help---
	Say Y here if you want to use the Fundamental Software dongle.

	To compile this driver as a module, choose M here: the
	module will be called funsoft.

	config USB_SERIAL_VISOR
	tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to connect to your HandSpring Visor, Palm
	m500 or m505 through its USB docking station. See
	<http://usbvisor.sourceforge.net/> for more information on using this
	driver.

	To compile this driver as a module, choose M here: the
	module will be called visor.

	config USB_SERIAL_IPAQ
	tristate "USB PocketPC PDA Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
	or any other PDA running Windows CE 3.0 or PocketPC 2002
	using a USB cradle/cable. For information on using the driver,
	read <file:Documentation/usb/usb-serial.txt>.

	To compile this driver as a module, choose M here: the
	module will be called ipaq.

	config USB_SERIAL_IR
	tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
	depends on USB_SERIAL && EXPERIMENTAL
	help
	Say Y here if you want to enable simple serial support for USB IrDA
	devices. This is useful if you do not want to use the full IrDA
	stack.

	To compile this driver as a module, choose M here: the
	module will be called ir-usb.

	config USB_SERIAL_EDGEPORT
	tristate "USB Inside Out Edgeport Serial Driver"
	depends on USB_SERIAL
	---help---
	Say Y here if you want to use any of the following devices from
	Inside Out Networks (Digi):
	Edgeport/4
	Rapidport/4
	Edgeport/4t
	Edgeport/2
	Edgeport/4i
	Edgeport/2i
	Edgeport/421
	Edgeport/21
	Edgeport/8
	Edgeport/8 Dual
	Edgeport/2D8
	Edgeport/4D8
	Edgeport/8i
	Edgeport/2 DIN
	Edgeport/4 DIN
	Edgeport/16 Dual

	To compile this driver as a module, choose M here: the
	module will be called io_edgeport.

	config USB_SERIAL_EDGEPORT_TI
	tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
	depends on USB_SERIAL
	help
	Say Y here if you want to use any of the devices from Inside Out
	Networks (Digi) that are not supported by the io_edgeport driver.
	This includes the Edgeport/1 device.

	To compile this driver as a module, choose M here: the
	module will be called io_ti.

	config USB_SERIAL_GARMIN
	tristate "USB Garmin GPS driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to connect to your Garmin GPS.
	Should work with most Garmin GPS devices which have a native USB port.

	See <http://sourceforge.net/projects/garmin-gps> for the latest
	version of the driver.

	To compile this driver as a module, choose M here: the
	module will be called garmin_gps.

	config USB_SERIAL_IPW
	tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
	depends on USB_SERIAL && EXPERIMENTAL
	help
	Say Y here if you want to use a IPWireless USB modem such as
	the ones supplied by Axity3G/Sentech South Africa.

	To compile this driver as a module, choose M here: the
	module will be called ipw.

	config USB_SERIAL_KEYSPAN_PDA
	tristate "USB Keyspan PDA Single Port Serial Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use a Keyspan PDA single port USB to
	serial converter device. This driver makes use of firmware
	developed from scratch by Brian Warner.

	To compile this driver as a module, choose M here: the
	module will be called keyspan_pda.

	config USB_SERIAL_KEYSPAN
	tristate "USB Keyspan USA-xxx Serial Driver"
	depends on USB_SERIAL
	---help---
	Say Y here if you want to use Keyspan USB to serial converter
	devices. This driver makes use of Keyspan's official firmware
	and was developed with their support. You must also include
	firmware to support your particular device(s).

	See <http://misc.nu/hugh/keyspan.html> for more information.

	To compile this driver as a module, choose M here: the
	module will be called keyspan.

	config USB_SERIAL_KEYSPAN_MPR
	bool "USB Keyspan MPR Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the Keyspan MPR converter.

	config USB_SERIAL_KEYSPAN_USA28
	bool "USB Keyspan USA-28 Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-28 converter.

	config USB_SERIAL_KEYSPAN_USA28X
	bool "USB Keyspan USA-28X Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-28X converter.
	Be sure you have a USA-28X, there are also 28XA and 28XB
	models, the label underneath has the actual part number.

	config USB_SERIAL_KEYSPAN_USA28XA
	bool "USB Keyspan USA-28XA Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-28XA converter.
	Be sure you have a USA-28XA, there are also 28X and 28XB
	models, the label underneath has the actual part number.

	config USB_SERIAL_KEYSPAN_USA28XB
	bool "USB Keyspan USA-28XB Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-28XB converter.
	Be sure you have a USA-28XB, there are also 28X and 28XA
	models, the label underneath has the actual part number.

	config USB_SERIAL_KEYSPAN_USA19
	bool "USB Keyspan USA-19 Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-19 converter.

	config USB_SERIAL_KEYSPAN_USA18X
	bool "USB Keyspan USA-18X Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-18X converter.

	config USB_SERIAL_KEYSPAN_USA19W
	bool "USB Keyspan USA-19W Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-19W converter.

	config USB_SERIAL_KEYSPAN_USA19QW
	bool "USB Keyspan USA-19QW Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-19QW converter.

	config USB_SERIAL_KEYSPAN_USA19QI
	bool "USB Keyspan USA-19QI Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-19QI converter.

	config USB_SERIAL_KEYSPAN_USA49W
	bool "USB Keyspan USA-49W Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-49W converter.

	config USB_SERIAL_KEYSPAN_USA49WLC
	bool "USB Keyspan USA-49WLC Firmware"
	depends on USB_SERIAL_KEYSPAN
	help
	Say Y here to include firmware for the USA-49WLC converter.

	config USB_SERIAL_KLSI
	tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
	depends on USB_SERIAL && EXPERIMENTAL
	---help---
	Say Y here if you want to use a KL5KUSB105 - based single port
	serial adapter. The most widely known -- and currently the only
	tested -- device in this category is the PalmConnect USB Serial
	adapter sold by Palm Inc. for use with their Palm III and Palm V
	series PDAs.

	Please read <file:Documentation/usb/usb-serial.txt> for more
	information.

	To compile this driver as a module, choose M here: the
	module will be called kl5kusb105.

	config USB_SERIAL_KOBIL_SCT
	tristate "USB KOBIL chipcard reader"
	depends on USB_SERIAL
	---help---
	Say Y here if you want to use one of the following KOBIL USB chipcard
	readers:

	- USB TWIN
	- KAAN Standard Plus
	- KAAN SIM
	- SecOVID Reader Plus
	- B1 Professional
	- KAAN Professional

	Note that you need a current CT-API.
	To compile this driver as a module, choose M here: the
	module will be called kobil_sct.

	config USB_SERIAL_MCT_U232
	tristate "USB MCT Single Port Serial Driver"
	depends on USB_SERIAL
	---help---
	Say Y here if you want to use a USB Serial single port adapter from
	Magic Control Technology Corp. (U232 is one of the model numbers).

	This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
	BAY devices.

	To compile this driver as a module, choose M here: the
	module will be called mct_u232.

	config USB_SERIAL_NAVMAN
	tristate "USB Navman GPS device"
	depends on USB_SERIAL
	help
	To compile this driver as a module, choose M here: the
	module will be called navman.

	config USB_SERIAL_PL2303
	tristate "USB Prolific 2303 Single Port Serial Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use the PL2303 USB Serial single port
	adapter from Prolific.

	To compile this driver as a module, choose M here: the
	module will be called pl2303.

	config USB_SERIAL_HP4X
	tristate "USB HP4x Calculators support"
	depends on USB_SERIAL
	help
	Say Y here if you want to use an Hewlett-Packard 4x Calculator.

	To compile this driver as a module, choose M here: the
	module will be called hp4x.

	config USB_SERIAL_SAFE
	tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
	depends on USB_SERIAL && EXPERIMENTAL

	config USB_SERIAL_SAFE_PADDED
	bool "USB Secure Encapsulated Driver - Padded"
	depends on USB_SERIAL_SAFE

	config USB_SERIAL_TI
	tristate "USB TI 3410/5052 Serial Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use the TI USB 3410 or 5052
	serial devices.

	To compile this driver as a module, choose M here: the
	module will be called ti_usb_3410_5052.

	config USB_SERIAL_CYBERJACK
	tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
	depends on USB_SERIAL && EXPERIMENTAL
	---help---
	Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
	reader. This is an interface to ISO 7816 compatible contactbased
	chipcards, e.g. GSM SIMs.

	To compile this driver as a module, choose M here: the
	module will be called cyberjack.

	If unsure, say N.

	config USB_SERIAL_XIRCOM
	tristate "USB Xircom / Entregra Single Port Serial Driver"
	depends on USB_SERIAL
	help
	Say Y here if you want to use a Xircom or Entregra single port USB to
	serial converter device. This driver makes use of firmware
	developed from scratch by Brian Warner.

	To compile this driver as a module, choose M here: the
	module will be called keyspan_pda.

	config USB_SERIAL_OPTION
	tristate "USB Option PCMCIA serial driver"
	depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
	help
	Say Y here if you want to use an Option card. This is a
	GSM card, controlled by three serial ports which are connected
	via an OHCI adapter located on a PC card.

	To compile this driver as a module, choose M here: the
	module will be called option.

	config USB_SERIAL_OMNINET
	tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
	depends on USB_SERIAL && EXPERIMENTAL
	help
	Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.

	To compile this driver as a module, choose M here: the
	module will be called omninet.

	config USB_EZUSB
	bool
	depends on USB_SERIAL_KEYSPAN_PDA \|\| USB_SERIAL_XIRCOM \|\| USB_SERIAL_KEYSPAN \|\| USB_SERIAL_WHITEHEAT
	default y

	endmenu