| /* pci.c: UltraSparc PCI controller support. |
| * |
| * Copyright (C) 1997, 1998, 1999 David S. Miller (davem@redhat.com) |
| * Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be) |
| * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz) |
| * |
| * OF tree based PCI bus probing taken from the PowerPC port |
| * with minor modifications, see there for credits. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/sched.h> |
| #include <linux/capability.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/msi.h> |
| #include <linux/irq.h> |
| #include <linux/init.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/pgtable.h> |
| #include <asm/irq.h> |
| #include <asm/ebus.h> |
| #include <asm/isa.h> |
| #include <asm/prom.h> |
| #include <asm/apb.h> |
| |
| #include "pci_impl.h" |
| |
| unsigned long pci_memspace_mask = 0xffffffffUL; |
| |
| #ifndef CONFIG_PCI |
| /* A "nop" PCI implementation. */ |
| asmlinkage int sys_pciconfig_read(unsigned long bus, unsigned long dfn, |
| unsigned long off, unsigned long len, |
| unsigned char *buf) |
| { |
| return 0; |
| } |
| asmlinkage int sys_pciconfig_write(unsigned long bus, unsigned long dfn, |
| unsigned long off, unsigned long len, |
| unsigned char *buf) |
| { |
| return 0; |
| } |
| #else |
| |
| /* List of all PCI controllers found in the system. */ |
| struct pci_pbm_info *pci_pbm_root = NULL; |
| |
| /* Each PBM found gets a unique index. */ |
| int pci_num_pbms = 0; |
| |
| volatile int pci_poke_in_progress; |
| volatile int pci_poke_cpu = -1; |
| volatile int pci_poke_faulted; |
| |
| static DEFINE_SPINLOCK(pci_poke_lock); |
| |
| void pci_config_read8(u8 *addr, u8 *ret) |
| { |
| unsigned long flags; |
| u8 byte; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "lduba [%1] %2, %0\n\t" |
| "membar #Sync" |
| : "=r" (byte) |
| : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| if (!pci_poke_faulted) |
| *ret = byte; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_read16(u16 *addr, u16 *ret) |
| { |
| unsigned long flags; |
| u16 word; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "lduha [%1] %2, %0\n\t" |
| "membar #Sync" |
| : "=r" (word) |
| : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| if (!pci_poke_faulted) |
| *ret = word; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_read32(u32 *addr, u32 *ret) |
| { |
| unsigned long flags; |
| u32 dword; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "lduwa [%1] %2, %0\n\t" |
| "membar #Sync" |
| : "=r" (dword) |
| : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| if (!pci_poke_faulted) |
| *ret = dword; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_write8(u8 *addr, u8 val) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "stba %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_write16(u16 *addr, u16 val) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "stha %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| void pci_config_write32(u32 *addr, u32 val) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pci_poke_lock, flags); |
| pci_poke_cpu = smp_processor_id(); |
| pci_poke_in_progress = 1; |
| pci_poke_faulted = 0; |
| __asm__ __volatile__("membar #Sync\n\t" |
| "stwa %0, [%1] %2\n\t" |
| "membar #Sync" |
| : /* no outputs */ |
| : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| pci_poke_in_progress = 0; |
| pci_poke_cpu = -1; |
| spin_unlock_irqrestore(&pci_poke_lock, flags); |
| } |
| |
| /* Probe for all PCI controllers in the system. */ |
| extern void sabre_init(struct device_node *, const char *); |
| extern void psycho_init(struct device_node *, const char *); |
| extern void schizo_init(struct device_node *, const char *); |
| extern void schizo_plus_init(struct device_node *, const char *); |
| extern void tomatillo_init(struct device_node *, const char *); |
| extern void sun4v_pci_init(struct device_node *, const char *); |
| extern void fire_pci_init(struct device_node *, const char *); |
| |
| static struct { |
| char *model_name; |
| void (*init)(struct device_node *, const char *); |
| } pci_controller_table[] __initdata = { |
| { "SUNW,sabre", sabre_init }, |
| { "pci108e,a000", sabre_init }, |
| { "pci108e,a001", sabre_init }, |
| { "SUNW,psycho", psycho_init }, |
| { "pci108e,8000", psycho_init }, |
| { "SUNW,schizo", schizo_init }, |
| { "pci108e,8001", schizo_init }, |
| { "SUNW,schizo+", schizo_plus_init }, |
| { "pci108e,8002", schizo_plus_init }, |
| { "SUNW,tomatillo", tomatillo_init }, |
| { "pci108e,a801", tomatillo_init }, |
| { "SUNW,sun4v-pci", sun4v_pci_init }, |
| { "pciex108e,80f0", fire_pci_init }, |
| }; |
| #define PCI_NUM_CONTROLLER_TYPES (sizeof(pci_controller_table) / \ |
| sizeof(pci_controller_table[0])) |
| |
| static int __init pci_controller_init(const char *model_name, int namelen, struct device_node *dp) |
| { |
| int i; |
| |
| for (i = 0; i < PCI_NUM_CONTROLLER_TYPES; i++) { |
| if (!strncmp(model_name, |
| pci_controller_table[i].model_name, |
| namelen)) { |
| pci_controller_table[i].init(dp, model_name); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int __init pci_is_controller(const char *model_name, int namelen, struct device_node *dp) |
| { |
| int i; |
| |
| for (i = 0; i < PCI_NUM_CONTROLLER_TYPES; i++) { |
| if (!strncmp(model_name, |
| pci_controller_table[i].model_name, |
| namelen)) { |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static int __init pci_controller_scan(int (*handler)(const char *, int, struct device_node *)) |
| { |
| struct device_node *dp; |
| int count = 0; |
| |
| for_each_node_by_name(dp, "pci") { |
| struct property *prop; |
| int len; |
| |
| prop = of_find_property(dp, "model", &len); |
| if (!prop) |
| prop = of_find_property(dp, "compatible", &len); |
| |
| if (prop) { |
| const char *model = prop->value; |
| int item_len = 0; |
| |
| /* Our value may be a multi-valued string in the |
| * case of some compatible properties. For sanity, |
| * only try the first one. |
| */ |
| while (model[item_len] && len) { |
| len--; |
| item_len++; |
| } |
| |
| if (handler(model, item_len, dp)) |
| count++; |
| } |
| } |
| |
| return count; |
| } |
| |
| |
| /* Is there some PCI controller in the system? */ |
| int __init pcic_present(void) |
| { |
| return pci_controller_scan(pci_is_controller); |
| } |
| |
| const struct pci_iommu_ops *pci_iommu_ops; |
| EXPORT_SYMBOL(pci_iommu_ops); |
| |
| extern const struct pci_iommu_ops pci_sun4u_iommu_ops, |
| pci_sun4v_iommu_ops; |
| |
| /* Find each controller in the system, attach and initialize |
| * software state structure for each and link into the |
| * pci_pbm_root. Setup the controller enough such |
| * that bus scanning can be done. |
| */ |
| static void __init pci_controller_probe(void) |
| { |
| if (tlb_type == hypervisor) |
| pci_iommu_ops = &pci_sun4v_iommu_ops; |
| else |
| pci_iommu_ops = &pci_sun4u_iommu_ops; |
| |
| printk("PCI: Probing for controllers.\n"); |
| |
| pci_controller_scan(pci_controller_init); |
| } |
| |
| static unsigned long pci_parse_of_flags(u32 addr0) |
| { |
| unsigned long flags = 0; |
| |
| if (addr0 & 0x02000000) { |
| flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; |
| flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; |
| flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; |
| if (addr0 & 0x40000000) |
| flags |= IORESOURCE_PREFETCH |
| | PCI_BASE_ADDRESS_MEM_PREFETCH; |
| } else if (addr0 & 0x01000000) |
| flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; |
| return flags; |
| } |
| |
| /* The of_device layer has translated all of the assigned-address properties |
| * into physical address resources, we only have to figure out the register |
| * mapping. |
| */ |
| static void pci_parse_of_addrs(struct of_device *op, |
| struct device_node *node, |
| struct pci_dev *dev) |
| { |
| struct resource *op_res; |
| const u32 *addrs; |
| int proplen; |
| |
| addrs = of_get_property(node, "assigned-addresses", &proplen); |
| if (!addrs) |
| return; |
| printk(" parse addresses (%d bytes) @ %p\n", proplen, addrs); |
| op_res = &op->resource[0]; |
| for (; proplen >= 20; proplen -= 20, addrs += 5, op_res++) { |
| struct resource *res; |
| unsigned long flags; |
| int i; |
| |
| flags = pci_parse_of_flags(addrs[0]); |
| if (!flags) |
| continue; |
| i = addrs[0] & 0xff; |
| printk(" start: %lx, end: %lx, i: %x\n", |
| op_res->start, op_res->end, i); |
| |
| if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { |
| res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; |
| } else if (i == dev->rom_base_reg) { |
| res = &dev->resource[PCI_ROM_RESOURCE]; |
| flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; |
| } else { |
| printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); |
| continue; |
| } |
| res->start = op_res->start; |
| res->end = op_res->end; |
| res->flags = flags; |
| res->name = pci_name(dev); |
| } |
| } |
| |
| struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, |
| struct device_node *node, |
| struct pci_bus *bus, int devfn, |
| int host_controller) |
| { |
| struct dev_archdata *sd; |
| struct pci_dev *dev; |
| const char *type; |
| u32 class; |
| |
| dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); |
| if (!dev) |
| return NULL; |
| |
| sd = &dev->dev.archdata; |
| sd->iommu = pbm->iommu; |
| sd->stc = &pbm->stc; |
| sd->host_controller = pbm; |
| sd->prom_node = node; |
| sd->op = of_find_device_by_node(node); |
| sd->msi_num = 0xffffffff; |
| |
| type = of_get_property(node, "device_type", NULL); |
| if (type == NULL) |
| type = ""; |
| |
| printk(" create device, devfn: %x, type: %s hostcontroller(%d)\n", |
| devfn, type, host_controller); |
| |
| dev->bus = bus; |
| dev->sysdata = node; |
| dev->dev.parent = bus->bridge; |
| dev->dev.bus = &pci_bus_type; |
| dev->devfn = devfn; |
| dev->multifunction = 0; /* maybe a lie? */ |
| |
| if (host_controller) { |
| dev->vendor = 0x108e; |
| dev->device = 0x8000; |
| dev->subsystem_vendor = 0x0000; |
| dev->subsystem_device = 0x0000; |
| dev->cfg_size = 256; |
| dev->class = PCI_CLASS_BRIDGE_HOST << 8; |
| sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), |
| 0x00, PCI_SLOT(devfn), PCI_FUNC(devfn)); |
| } else { |
| dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff); |
| dev->device = of_getintprop_default(node, "device-id", 0xffff); |
| dev->subsystem_vendor = |
| of_getintprop_default(node, "subsystem-vendor-id", 0); |
| dev->subsystem_device = |
| of_getintprop_default(node, "subsystem-id", 0); |
| |
| dev->cfg_size = pci_cfg_space_size(dev); |
| |
| /* We can't actually use the firmware value, we have |
| * to read what is in the register right now. One |
| * reason is that in the case of IDE interfaces the |
| * firmware can sample the value before the the IDE |
| * interface is programmed into native mode. |
| */ |
| pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); |
| dev->class = class >> 8; |
| |
| sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), |
| dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); |
| } |
| printk(" class: 0x%x device name: %s\n", |
| dev->class, pci_name(dev)); |
| |
| /* I have seen IDE devices which will not respond to |
| * the bmdma simplex check reads if bus mastering is |
| * disabled. |
| */ |
| if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) |
| pci_set_master(dev); |
| |
| dev->current_state = 4; /* unknown power state */ |
| dev->error_state = pci_channel_io_normal; |
| |
| if (host_controller) { |
| dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; |
| dev->rom_base_reg = PCI_ROM_ADDRESS1; |
| dev->irq = PCI_IRQ_NONE; |
| } else { |
| if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { |
| /* a PCI-PCI bridge */ |
| dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; |
| dev->rom_base_reg = PCI_ROM_ADDRESS1; |
| } else if (!strcmp(type, "cardbus")) { |
| dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; |
| } else { |
| dev->hdr_type = PCI_HEADER_TYPE_NORMAL; |
| dev->rom_base_reg = PCI_ROM_ADDRESS; |
| |
| dev->irq = sd->op->irqs[0]; |
| if (dev->irq == 0xffffffff) |
| dev->irq = PCI_IRQ_NONE; |
| } |
| } |
| pci_parse_of_addrs(sd->op, node, dev); |
| |
| printk(" adding to system ...\n"); |
| |
| pci_device_add(dev, bus); |
| |
| return dev; |
| } |
| |
| static void __devinit apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p) |
| { |
| u32 idx, first, last; |
| |
| first = 8; |
| last = 0; |
| for (idx = 0; idx < 8; idx++) { |
| if ((map & (1 << idx)) != 0) { |
| if (first > idx) |
| first = idx; |
| if (last < idx) |
| last = idx; |
| } |
| } |
| |
| *first_p = first; |
| *last_p = last; |
| } |
| |
| static void __init pci_resource_adjust(struct resource *res, |
| struct resource *root) |
| { |
| res->start += root->start; |
| res->end += root->start; |
| } |
| |
| /* Cook up fake bus resources for SUNW,simba PCI bridges which lack |
| * a proper 'ranges' property. |
| */ |
| static void __devinit apb_fake_ranges(struct pci_dev *dev, |
| struct pci_bus *bus, |
| struct pci_pbm_info *pbm) |
| { |
| struct resource *res; |
| u32 first, last; |
| u8 map; |
| |
| pci_read_config_byte(dev, APB_IO_ADDRESS_MAP, &map); |
| apb_calc_first_last(map, &first, &last); |
| res = bus->resource[0]; |
| res->start = (first << 21); |
| res->end = (last << 21) + ((1 << 21) - 1); |
| res->flags = IORESOURCE_IO; |
| pci_resource_adjust(res, &pbm->io_space); |
| |
| pci_read_config_byte(dev, APB_MEM_ADDRESS_MAP, &map); |
| apb_calc_first_last(map, &first, &last); |
| res = bus->resource[1]; |
| res->start = (first << 21); |
| res->end = (last << 21) + ((1 << 21) - 1); |
| res->flags = IORESOURCE_MEM; |
| pci_resource_adjust(res, &pbm->mem_space); |
| } |
| |
| static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, |
| struct device_node *node, |
| struct pci_bus *bus); |
| |
| #define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) |
| |
| static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm, |
| struct device_node *node, |
| struct pci_dev *dev) |
| { |
| struct pci_bus *bus; |
| const u32 *busrange, *ranges; |
| int len, i, simba; |
| struct resource *res; |
| unsigned int flags; |
| u64 size; |
| |
| printk("of_scan_pci_bridge(%s)\n", node->full_name); |
| |
| /* parse bus-range property */ |
| busrange = of_get_property(node, "bus-range", &len); |
| if (busrange == NULL || len != 8) { |
| printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| ranges = of_get_property(node, "ranges", &len); |
| simba = 0; |
| if (ranges == NULL) { |
| const char *model = of_get_property(node, "model", NULL); |
| if (model && !strcmp(model, "SUNW,simba")) { |
| simba = 1; |
| } else { |
| printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| } |
| |
| bus = pci_add_new_bus(dev->bus, dev, busrange[0]); |
| if (!bus) { |
| printk(KERN_ERR "Failed to create pci bus for %s\n", |
| node->full_name); |
| return; |
| } |
| |
| bus->primary = dev->bus->number; |
| bus->subordinate = busrange[1]; |
| bus->bridge_ctl = 0; |
| |
| /* parse ranges property, or cook one up by hand for Simba */ |
| /* PCI #address-cells == 3 and #size-cells == 2 always */ |
| res = &dev->resource[PCI_BRIDGE_RESOURCES]; |
| for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { |
| res->flags = 0; |
| bus->resource[i] = res; |
| ++res; |
| } |
| if (simba) { |
| apb_fake_ranges(dev, bus, pbm); |
| goto simba_cont; |
| } |
| i = 1; |
| for (; len >= 32; len -= 32, ranges += 8) { |
| struct resource *root; |
| |
| flags = pci_parse_of_flags(ranges[0]); |
| size = GET_64BIT(ranges, 6); |
| if (flags == 0 || size == 0) |
| continue; |
| if (flags & IORESOURCE_IO) { |
| res = bus->resource[0]; |
| if (res->flags) { |
| printk(KERN_ERR "PCI: ignoring extra I/O range" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| root = &pbm->io_space; |
| } else { |
| if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { |
| printk(KERN_ERR "PCI: too many memory ranges" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| res = bus->resource[i]; |
| ++i; |
| root = &pbm->mem_space; |
| } |
| |
| res->start = GET_64BIT(ranges, 1); |
| res->end = res->start + size - 1; |
| res->flags = flags; |
| |
| /* Another way to implement this would be to add an of_device |
| * layer routine that can calculate a resource for a given |
| * range property value in a PCI device. |
| */ |
| pci_resource_adjust(res, root); |
| } |
| simba_cont: |
| sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), |
| bus->number); |
| printk(" bus name: %s\n", bus->name); |
| |
| pci_of_scan_bus(pbm, node, bus); |
| } |
| |
| static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, |
| struct device_node *node, |
| struct pci_bus *bus) |
| { |
| struct device_node *child; |
| const u32 *reg; |
| int reglen, devfn; |
| struct pci_dev *dev; |
| |
| printk("PCI: scan_bus[%s] bus no %d\n", |
| node->full_name, bus->number); |
| |
| child = NULL; |
| while ((child = of_get_next_child(node, child)) != NULL) { |
| printk(" * %s\n", child->full_name); |
| reg = of_get_property(child, "reg", ®len); |
| if (reg == NULL || reglen < 20) |
| continue; |
| devfn = (reg[0] >> 8) & 0xff; |
| |
| /* create a new pci_dev for this device */ |
| dev = of_create_pci_dev(pbm, child, bus, devfn, 0); |
| if (!dev) |
| continue; |
| printk("PCI: dev header type: %x\n", dev->hdr_type); |
| |
| if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || |
| dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) |
| of_scan_pci_bridge(pbm, child, dev); |
| } |
| } |
| |
| static ssize_t |
| show_pciobppath_attr(struct device * dev, struct device_attribute * attr, char * buf) |
| { |
| struct pci_dev *pdev; |
| struct device_node *dp; |
| |
| pdev = to_pci_dev(dev); |
| dp = pdev->dev.archdata.prom_node; |
| |
| return snprintf (buf, PAGE_SIZE, "%s\n", dp->full_name); |
| } |
| |
| static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_pciobppath_attr, NULL); |
| |
| static void __devinit pci_bus_register_of_sysfs(struct pci_bus *bus) |
| { |
| struct pci_dev *dev; |
| struct pci_bus *child_bus; |
| int err; |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| /* we don't really care if we can create this file or |
| * not, but we need to assign the result of the call |
| * or the world will fall under alien invasion and |
| * everybody will be frozen on a spaceship ready to be |
| * eaten on alpha centauri by some green and jelly |
| * humanoid. |
| */ |
| err = sysfs_create_file(&dev->dev.kobj, &dev_attr_obppath.attr); |
| } |
| list_for_each_entry(child_bus, &bus->children, node) |
| pci_bus_register_of_sysfs(child_bus); |
| } |
| |
| int pci_host_bridge_read_pci_cfg(struct pci_bus *bus_dev, |
| unsigned int devfn, |
| int where, int size, |
| u32 *value) |
| { |
| static u8 fake_pci_config[] = { |
| 0x8e, 0x10, /* Vendor: 0x108e (Sun) */ |
| 0x00, 0x80, /* Device: 0x8000 (PBM) */ |
| 0x46, 0x01, /* Command: 0x0146 (SERR, PARITY, MASTER, MEM) */ |
| 0xa0, 0x22, /* Status: 0x02a0 (DEVSEL_MED, FB2B, 66MHZ) */ |
| 0x00, 0x00, 0x00, 0x06, /* Class: 0x06000000 host bridge */ |
| 0x00, /* Cacheline: 0x00 */ |
| 0x40, /* Latency: 0x40 */ |
| 0x00, /* Header-Type: 0x00 normal */ |
| }; |
| |
| *value = 0; |
| if (where >= 0 && where < sizeof(fake_pci_config) && |
| (where + size) >= 0 && |
| (where + size) < sizeof(fake_pci_config) && |
| size <= sizeof(u32)) { |
| while (size--) { |
| *value <<= 8; |
| *value |= fake_pci_config[where + size]; |
| } |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev, |
| unsigned int devfn, |
| int where, int size, |
| u32 value) |
| { |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm) |
| { |
| struct device_node *node = pbm->prom_node; |
| struct pci_dev *host_pdev; |
| struct pci_bus *bus; |
| |
| printk("PCI: Scanning PBM %s\n", node->full_name); |
| |
| /* XXX parent device? XXX */ |
| bus = pci_create_bus(NULL, pbm->pci_first_busno, pbm->pci_ops, pbm); |
| if (!bus) { |
| printk(KERN_ERR "Failed to create bus for %s\n", |
| node->full_name); |
| return NULL; |
| } |
| bus->secondary = pbm->pci_first_busno; |
| bus->subordinate = pbm->pci_last_busno; |
| |
| bus->resource[0] = &pbm->io_space; |
| bus->resource[1] = &pbm->mem_space; |
| |
| /* Create the dummy host bridge and link it in. */ |
| host_pdev = of_create_pci_dev(pbm, node, bus, 0x00, 1); |
| bus->self = host_pdev; |
| |
| pci_of_scan_bus(pbm, node, bus); |
| pci_bus_add_devices(bus); |
| pci_bus_register_of_sysfs(bus); |
| |
| return bus; |
| } |
| |
| static void __init pci_scan_each_controller_bus(void) |
| { |
| struct pci_pbm_info *pbm; |
| |
| for (pbm = pci_pbm_root; pbm; pbm = pbm->next) |
| pbm->scan_bus(pbm); |
| } |
| |
| extern void power_init(void); |
| |
| static int __init pcibios_init(void) |
| { |
| pci_controller_probe(); |
| if (pci_pbm_root == NULL) |
| return 0; |
| |
| pci_scan_each_controller_bus(); |
| |
| isa_init(); |
| ebus_init(); |
| power_init(); |
| |
| return 0; |
| } |
| |
| subsys_initcall(pcibios_init); |
| |
| void __devinit pcibios_fixup_bus(struct pci_bus *pbus) |
| { |
| struct pci_pbm_info *pbm = pbus->sysdata; |
| |
| /* Generic PCI bus probing sets these to point at |
| * &io{port,mem}_resouce which is wrong for us. |
| */ |
| pbus->resource[0] = &pbm->io_space; |
| pbus->resource[1] = &pbm->mem_space; |
| } |
| |
| struct resource *pcibios_select_root(struct pci_dev *pdev, struct resource *r) |
| { |
| struct pci_pbm_info *pbm = pdev->bus->sysdata; |
| struct resource *root = NULL; |
| |
| if (r->flags & IORESOURCE_IO) |
| root = &pbm->io_space; |
| if (r->flags & IORESOURCE_MEM) |
| root = &pbm->mem_space; |
| |
| return root; |
| } |
| |
| void pcibios_update_irq(struct pci_dev *pdev, int irq) |
| { |
| } |
| |
| void pcibios_align_resource(void *data, struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, oldcmd; |
| int i; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| oldcmd = cmd; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| struct resource *res = &dev->resource[i]; |
| |
| /* Only set up the requested stuff */ |
| if (!(mask & (1<<i))) |
| continue; |
| |
| if (res->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (res->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| |
| if (cmd != oldcmd) { |
| printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", |
| pci_name(dev), cmd); |
| /* Enable the appropriate bits in the PCI command register. */ |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| void pcibios_resource_to_bus(struct pci_dev *pdev, struct pci_bus_region *region, |
| struct resource *res) |
| { |
| struct pci_pbm_info *pbm = pdev->bus->sysdata; |
| struct resource zero_res, *root; |
| |
| zero_res.start = 0; |
| zero_res.end = 0; |
| zero_res.flags = res->flags; |
| |
| if (res->flags & IORESOURCE_IO) |
| root = &pbm->io_space; |
| else |
| root = &pbm->mem_space; |
| |
| pci_resource_adjust(&zero_res, root); |
| |
| region->start = res->start - zero_res.start; |
| region->end = res->end - zero_res.start; |
| } |
| EXPORT_SYMBOL(pcibios_resource_to_bus); |
| |
| void pcibios_bus_to_resource(struct pci_dev *pdev, struct resource *res, |
| struct pci_bus_region *region) |
| { |
| struct pci_pbm_info *pbm = pdev->bus->sysdata; |
| struct resource *root; |
| |
| res->start = region->start; |
| res->end = region->end; |
| |
| if (res->flags & IORESOURCE_IO) |
| root = &pbm->io_space; |
| else |
| root = &pbm->mem_space; |
| |
| pci_resource_adjust(res, root); |
| } |
| EXPORT_SYMBOL(pcibios_bus_to_resource); |
| |
| char * __devinit pcibios_setup(char *str) |
| { |
| return str; |
| } |
| |
| /* Platform support for /proc/bus/pci/X/Y mmap()s. */ |
| |
| /* If the user uses a host-bridge as the PCI device, he may use |
| * this to perform a raw mmap() of the I/O or MEM space behind |
| * that controller. |
| * |
| * This can be useful for execution of x86 PCI bios initialization code |
| * on a PCI card, like the xfree86 int10 stuff does. |
| */ |
| static int __pci_mmap_make_offset_bus(struct pci_dev *pdev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state) |
| { |
| struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; |
| unsigned long space_size, user_offset, user_size; |
| |
| if (mmap_state == pci_mmap_io) { |
| space_size = (pbm->io_space.end - |
| pbm->io_space.start) + 1; |
| } else { |
| space_size = (pbm->mem_space.end - |
| pbm->mem_space.start) + 1; |
| } |
| |
| /* Make sure the request is in range. */ |
| user_offset = vma->vm_pgoff << PAGE_SHIFT; |
| user_size = vma->vm_end - vma->vm_start; |
| |
| if (user_offset >= space_size || |
| (user_offset + user_size) > space_size) |
| return -EINVAL; |
| |
| if (mmap_state == pci_mmap_io) { |
| vma->vm_pgoff = (pbm->io_space.start + |
| user_offset) >> PAGE_SHIFT; |
| } else { |
| vma->vm_pgoff = (pbm->mem_space.start + |
| user_offset) >> PAGE_SHIFT; |
| } |
| |
| return 0; |
| } |
| |
| /* Adjust vm_pgoff of VMA such that it is the physical page offset corresponding |
| * to the 32-bit pci bus offset for DEV requested by the user. |
| * |
| * Basically, the user finds the base address for his device which he wishes |
| * to mmap. They read the 32-bit value from the config space base register, |
| * add whatever PAGE_SIZE multiple offset they wish, and feed this into the |
| * offset parameter of mmap on /proc/bus/pci/XXX for that device. |
| * |
| * Returns negative error code on failure, zero on success. |
| */ |
| static int __pci_mmap_make_offset(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state) |
| { |
| unsigned long user_offset = vma->vm_pgoff << PAGE_SHIFT; |
| unsigned long user32 = user_offset & pci_memspace_mask; |
| unsigned long largest_base, this_base, addr32; |
| int i; |
| |
| if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) |
| return __pci_mmap_make_offset_bus(dev, vma, mmap_state); |
| |
| /* Figure out which base address this is for. */ |
| largest_base = 0UL; |
| for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| struct resource *rp = &dev->resource[i]; |
| |
| /* Active? */ |
| if (!rp->flags) |
| continue; |
| |
| /* Same type? */ |
| if (i == PCI_ROM_RESOURCE) { |
| if (mmap_state != pci_mmap_mem) |
| continue; |
| } else { |
| if ((mmap_state == pci_mmap_io && |
| (rp->flags & IORESOURCE_IO) == 0) || |
| (mmap_state == pci_mmap_mem && |
| (rp->flags & IORESOURCE_MEM) == 0)) |
| continue; |
| } |
| |
| this_base = rp->start; |
| |
| addr32 = (this_base & PAGE_MASK) & pci_memspace_mask; |
| |
| if (mmap_state == pci_mmap_io) |
| addr32 &= 0xffffff; |
| |
| if (addr32 <= user32 && this_base > largest_base) |
| largest_base = this_base; |
| } |
| |
| if (largest_base == 0UL) |
| return -EINVAL; |
| |
| /* Now construct the final physical address. */ |
| if (mmap_state == pci_mmap_io) |
| vma->vm_pgoff = (((largest_base & ~0xffffffUL) | user32) >> PAGE_SHIFT); |
| else |
| vma->vm_pgoff = (((largest_base & ~(pci_memspace_mask)) | user32) >> PAGE_SHIFT); |
| |
| return 0; |
| } |
| |
| /* Set vm_flags of VMA, as appropriate for this architecture, for a pci device |
| * mapping. |
| */ |
| static void __pci_mmap_set_flags(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state) |
| { |
| vma->vm_flags |= (VM_IO | VM_RESERVED); |
| } |
| |
| /* Set vm_page_prot of VMA, as appropriate for this architecture, for a pci |
| * device mapping. |
| */ |
| static void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state) |
| { |
| /* Our io_remap_pfn_range takes care of this, do nothing. */ |
| } |
| |
| /* Perform the actual remap of the pages for a PCI device mapping, as appropriate |
| * for this architecture. The region in the process to map is described by vm_start |
| * and vm_end members of VMA, the base physical address is found in vm_pgoff. |
| * The pci device structure is provided so that architectures may make mapping |
| * decisions on a per-device or per-bus basis. |
| * |
| * Returns a negative error code on failure, zero on success. |
| */ |
| int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, |
| enum pci_mmap_state mmap_state, |
| int write_combine) |
| { |
| int ret; |
| |
| ret = __pci_mmap_make_offset(dev, vma, mmap_state); |
| if (ret < 0) |
| return ret; |
| |
| __pci_mmap_set_flags(dev, vma, mmap_state); |
| __pci_mmap_set_pgprot(dev, vma, mmap_state); |
| |
| vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); |
| ret = io_remap_pfn_range(vma, vma->vm_start, |
| vma->vm_pgoff, |
| vma->vm_end - vma->vm_start, |
| vma->vm_page_prot); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* Return the domain nuber for this pci bus */ |
| |
| int pci_domain_nr(struct pci_bus *pbus) |
| { |
| struct pci_pbm_info *pbm = pbus->sysdata; |
| int ret; |
| |
| if (pbm == NULL || pbm->parent == NULL) { |
| ret = -ENXIO; |
| } else { |
| ret = pbm->index; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pci_domain_nr); |
| |
| #ifdef CONFIG_PCI_MSI |
| int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) |
| { |
| struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; |
| int virt_irq; |
| |
| if (!pbm->setup_msi_irq) |
| return -EINVAL; |
| |
| return pbm->setup_msi_irq(&virt_irq, pdev, desc); |
| } |
| |
| void arch_teardown_msi_irq(unsigned int virt_irq) |
| { |
| struct msi_desc *entry = get_irq_msi(virt_irq); |
| struct pci_dev *pdev = entry->dev; |
| struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; |
| |
| if (!pbm->teardown_msi_irq) |
| return; |
| |
| return pbm->teardown_msi_irq(virt_irq, pdev); |
| } |
| #endif /* !(CONFIG_PCI_MSI) */ |
| |
| struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) |
| { |
| return pdev->dev.archdata.prom_node; |
| } |
| EXPORT_SYMBOL(pci_device_to_OF_node); |
| |
| #endif /* !(CONFIG_PCI) */ |