| /* |
| * Driver for Broadcom BRCMSTB, NSP, NS2, Cygnus SPI Controllers |
| * |
| * Copyright 2016 Broadcom |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, version 2, as |
| * published by the Free Software Foundation (the "GPL"). |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License version 2 (GPLv2) for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * version 2 (GPLv2) along with this source code. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| #include <linux/sysfs.h> |
| #include <linux/types.h> |
| #include "spi-bcm-qspi.h" |
| |
| #define DRIVER_NAME "bcm_qspi" |
| |
| |
| /* BSPI register offsets */ |
| #define BSPI_REVISION_ID 0x000 |
| #define BSPI_SCRATCH 0x004 |
| #define BSPI_MAST_N_BOOT_CTRL 0x008 |
| #define BSPI_BUSY_STATUS 0x00c |
| #define BSPI_INTR_STATUS 0x010 |
| #define BSPI_B0_STATUS 0x014 |
| #define BSPI_B0_CTRL 0x018 |
| #define BSPI_B1_STATUS 0x01c |
| #define BSPI_B1_CTRL 0x020 |
| #define BSPI_STRAP_OVERRIDE_CTRL 0x024 |
| #define BSPI_FLEX_MODE_ENABLE 0x028 |
| #define BSPI_BITS_PER_CYCLE 0x02c |
| #define BSPI_BITS_PER_PHASE 0x030 |
| #define BSPI_CMD_AND_MODE_BYTE 0x034 |
| #define BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038 |
| #define BSPI_BSPI_XOR_VALUE 0x03c |
| #define BSPI_BSPI_XOR_ENABLE 0x040 |
| #define BSPI_BSPI_PIO_MODE_ENABLE 0x044 |
| #define BSPI_BSPI_PIO_IODIR 0x048 |
| #define BSPI_BSPI_PIO_DATA 0x04c |
| |
| /* RAF register offsets */ |
| #define BSPI_RAF_START_ADDR 0x100 |
| #define BSPI_RAF_NUM_WORDS 0x104 |
| #define BSPI_RAF_CTRL 0x108 |
| #define BSPI_RAF_FULLNESS 0x10c |
| #define BSPI_RAF_WATERMARK 0x110 |
| #define BSPI_RAF_STATUS 0x114 |
| #define BSPI_RAF_READ_DATA 0x118 |
| #define BSPI_RAF_WORD_CNT 0x11c |
| #define BSPI_RAF_CURR_ADDR 0x120 |
| |
| /* Override mode masks */ |
| #define BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE BIT(0) |
| #define BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL BIT(1) |
| #define BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE BIT(2) |
| #define BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD BIT(3) |
| #define BSPI_STRAP_OVERRIDE_CTRL_ENDAIN_MODE BIT(4) |
| |
| #define BSPI_ADDRLEN_3BYTES 3 |
| #define BSPI_ADDRLEN_4BYTES 4 |
| |
| #define BSPI_RAF_STATUS_FIFO_EMPTY_MASK BIT(1) |
| |
| #define BSPI_RAF_CTRL_START_MASK BIT(0) |
| #define BSPI_RAF_CTRL_CLEAR_MASK BIT(1) |
| |
| #define BSPI_BPP_MODE_SELECT_MASK BIT(8) |
| #define BSPI_BPP_ADDR_SELECT_MASK BIT(16) |
| |
| #define BSPI_READ_LENGTH 256 |
| |
| /* MSPI register offsets */ |
| #define MSPI_SPCR0_LSB 0x000 |
| #define MSPI_SPCR0_MSB 0x004 |
| #define MSPI_SPCR1_LSB 0x008 |
| #define MSPI_SPCR1_MSB 0x00c |
| #define MSPI_NEWQP 0x010 |
| #define MSPI_ENDQP 0x014 |
| #define MSPI_SPCR2 0x018 |
| #define MSPI_MSPI_STATUS 0x020 |
| #define MSPI_CPTQP 0x024 |
| #define MSPI_SPCR3 0x028 |
| #define MSPI_TXRAM 0x040 |
| #define MSPI_RXRAM 0x0c0 |
| #define MSPI_CDRAM 0x140 |
| #define MSPI_WRITE_LOCK 0x180 |
| |
| #define MSPI_MASTER_BIT BIT(7) |
| |
| #define MSPI_NUM_CDRAM 16 |
| #define MSPI_CDRAM_CONT_BIT BIT(7) |
| #define MSPI_CDRAM_BITSE_BIT BIT(6) |
| #define MSPI_CDRAM_PCS 0xf |
| |
| #define MSPI_SPCR2_SPE BIT(6) |
| #define MSPI_SPCR2_CONT_AFTER_CMD BIT(7) |
| |
| #define MSPI_MSPI_STATUS_SPIF BIT(0) |
| |
| #define INTR_BASE_BIT_SHIFT 0x02 |
| #define INTR_COUNT 0x07 |
| |
| #define NUM_CHIPSELECT 4 |
| #define QSPI_SPBR_MIN 8U |
| #define QSPI_SPBR_MAX 255U |
| |
| #define OPCODE_DIOR 0xBB |
| #define OPCODE_QIOR 0xEB |
| #define OPCODE_DIOR_4B 0xBC |
| #define OPCODE_QIOR_4B 0xEC |
| |
| #define MAX_CMD_SIZE 6 |
| |
| #define ADDR_4MB_MASK GENMASK(22, 0) |
| |
| /* stop at end of transfer, no other reason */ |
| #define TRANS_STATUS_BREAK_NONE 0 |
| /* stop at end of spi_message */ |
| #define TRANS_STATUS_BREAK_EOM 1 |
| /* stop at end of spi_transfer if delay */ |
| #define TRANS_STATUS_BREAK_DELAY 2 |
| /* stop at end of spi_transfer if cs_change */ |
| #define TRANS_STATUS_BREAK_CS_CHANGE 4 |
| /* stop if we run out of bytes */ |
| #define TRANS_STATUS_BREAK_NO_BYTES 8 |
| |
| /* events that make us stop filling TX slots */ |
| #define TRANS_STATUS_BREAK_TX (TRANS_STATUS_BREAK_EOM | \ |
| TRANS_STATUS_BREAK_DELAY | \ |
| TRANS_STATUS_BREAK_CS_CHANGE) |
| |
| /* events that make us deassert CS */ |
| #define TRANS_STATUS_BREAK_DESELECT (TRANS_STATUS_BREAK_EOM | \ |
| TRANS_STATUS_BREAK_CS_CHANGE) |
| |
| struct bcm_qspi_parms { |
| u32 speed_hz; |
| u8 mode; |
| u8 bits_per_word; |
| }; |
| |
| struct bcm_xfer_mode { |
| bool flex_mode; |
| unsigned int width; |
| unsigned int addrlen; |
| unsigned int hp; |
| }; |
| |
| enum base_type { |
| MSPI, |
| BSPI, |
| CHIP_SELECT, |
| BASEMAX, |
| }; |
| |
| enum irq_source { |
| SINGLE_L2, |
| MUXED_L1, |
| }; |
| |
| struct bcm_qspi_irq { |
| const char *irq_name; |
| const irq_handler_t irq_handler; |
| int irq_source; |
| u32 mask; |
| }; |
| |
| struct bcm_qspi_dev_id { |
| const struct bcm_qspi_irq *irqp; |
| void *dev; |
| }; |
| |
| |
| struct qspi_trans { |
| struct spi_transfer *trans; |
| int byte; |
| bool mspi_last_trans; |
| }; |
| |
| struct bcm_qspi { |
| struct platform_device *pdev; |
| struct spi_master *master; |
| struct clk *clk; |
| u32 base_clk; |
| u32 max_speed_hz; |
| void __iomem *base[BASEMAX]; |
| |
| /* Some SoCs provide custom interrupt status register(s) */ |
| struct bcm_qspi_soc_intc *soc_intc; |
| |
| struct bcm_qspi_parms last_parms; |
| struct qspi_trans trans_pos; |
| int curr_cs; |
| int bspi_maj_rev; |
| int bspi_min_rev; |
| int bspi_enabled; |
| struct spi_flash_read_message *bspi_rf_msg; |
| u32 bspi_rf_msg_idx; |
| u32 bspi_rf_msg_len; |
| u32 bspi_rf_msg_status; |
| struct bcm_xfer_mode xfer_mode; |
| u32 s3_strap_override_ctrl; |
| bool bspi_mode; |
| bool big_endian; |
| int num_irqs; |
| struct bcm_qspi_dev_id *dev_ids; |
| struct completion mspi_done; |
| struct completion bspi_done; |
| }; |
| |
| static inline bool has_bspi(struct bcm_qspi *qspi) |
| { |
| return qspi->bspi_mode; |
| } |
| |
| /* Read qspi controller register*/ |
| static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type, |
| unsigned int offset) |
| { |
| return bcm_qspi_readl(qspi->big_endian, qspi->base[type] + offset); |
| } |
| |
| /* Write qspi controller register*/ |
| static inline void bcm_qspi_write(struct bcm_qspi *qspi, enum base_type type, |
| unsigned int offset, unsigned int data) |
| { |
| bcm_qspi_writel(qspi->big_endian, data, qspi->base[type] + offset); |
| } |
| |
| /* BSPI helpers */ |
| static int bcm_qspi_bspi_busy_poll(struct bcm_qspi *qspi) |
| { |
| int i; |
| |
| /* this should normally finish within 10us */ |
| for (i = 0; i < 1000; i++) { |
| if (!(bcm_qspi_read(qspi, BSPI, BSPI_BUSY_STATUS) & 1)) |
| return 0; |
| udelay(1); |
| } |
| dev_warn(&qspi->pdev->dev, "timeout waiting for !busy_status\n"); |
| return -EIO; |
| } |
| |
| static inline bool bcm_qspi_bspi_ver_three(struct bcm_qspi *qspi) |
| { |
| if (qspi->bspi_maj_rev < 4) |
| return true; |
| return false; |
| } |
| |
| static void bcm_qspi_bspi_flush_prefetch_buffers(struct bcm_qspi *qspi) |
| { |
| bcm_qspi_bspi_busy_poll(qspi); |
| /* Force rising edge for the b0/b1 'flush' field */ |
| bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 1); |
| bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 1); |
| bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0); |
| bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0); |
| } |
| |
| static int bcm_qspi_bspi_lr_is_fifo_empty(struct bcm_qspi *qspi) |
| { |
| return (bcm_qspi_read(qspi, BSPI, BSPI_RAF_STATUS) & |
| BSPI_RAF_STATUS_FIFO_EMPTY_MASK); |
| } |
| |
| static inline u32 bcm_qspi_bspi_lr_read_fifo(struct bcm_qspi *qspi) |
| { |
| u32 data = bcm_qspi_read(qspi, BSPI, BSPI_RAF_READ_DATA); |
| |
| /* BSPI v3 LR is LE only, convert data to host endianness */ |
| if (bcm_qspi_bspi_ver_three(qspi)) |
| data = le32_to_cpu(data); |
| |
| return data; |
| } |
| |
| static inline void bcm_qspi_bspi_lr_start(struct bcm_qspi *qspi) |
| { |
| bcm_qspi_bspi_busy_poll(qspi); |
| bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL, |
| BSPI_RAF_CTRL_START_MASK); |
| } |
| |
| static inline void bcm_qspi_bspi_lr_clear(struct bcm_qspi *qspi) |
| { |
| bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL, |
| BSPI_RAF_CTRL_CLEAR_MASK); |
| bcm_qspi_bspi_flush_prefetch_buffers(qspi); |
| } |
| |
| static void bcm_qspi_bspi_lr_data_read(struct bcm_qspi *qspi) |
| { |
| u32 *buf = (u32 *)qspi->bspi_rf_msg->buf; |
| u32 data = 0; |
| |
| dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_msg, |
| qspi->bspi_rf_msg->buf, qspi->bspi_rf_msg_len); |
| while (!bcm_qspi_bspi_lr_is_fifo_empty(qspi)) { |
| data = bcm_qspi_bspi_lr_read_fifo(qspi); |
| if (likely(qspi->bspi_rf_msg_len >= 4) && |
| IS_ALIGNED((uintptr_t)buf, 4)) { |
| buf[qspi->bspi_rf_msg_idx++] = data; |
| qspi->bspi_rf_msg_len -= 4; |
| } else { |
| /* Read out remaining bytes, make sure*/ |
| u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_msg_idx]; |
| |
| data = cpu_to_le32(data); |
| while (qspi->bspi_rf_msg_len) { |
| *cbuf++ = (u8)data; |
| data >>= 8; |
| qspi->bspi_rf_msg_len--; |
| } |
| } |
| } |
| } |
| |
| static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte, |
| int bpp, int bpc, int flex_mode) |
| { |
| bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0); |
| bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_CYCLE, bpc); |
| bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_PHASE, bpp); |
| bcm_qspi_write(qspi, BSPI, BSPI_CMD_AND_MODE_BYTE, cmd_byte); |
| bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode); |
| } |
| |
| static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, |
| struct spi_flash_read_message *msg, |
| int hp) |
| { |
| int bpc = 0, bpp = 0; |
| u8 command = msg->read_opcode; |
| int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; |
| int addrlen = msg->addr_width; |
| int addr_nbits = msg->addr_nbits ? msg->addr_nbits : SPI_NBITS_SINGLE; |
| int flex_mode = 1; |
| |
| dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n", |
| width, addrlen, hp); |
| |
| if (addrlen == BSPI_ADDRLEN_4BYTES) |
| bpp = BSPI_BPP_ADDR_SELECT_MASK; |
| |
| bpp |= msg->dummy_bytes * (8/addr_nbits); |
| |
| switch (width) { |
| case SPI_NBITS_SINGLE: |
| if (addrlen == BSPI_ADDRLEN_3BYTES) |
| /* default mode, does not need flex_cmd */ |
| flex_mode = 0; |
| break; |
| case SPI_NBITS_DUAL: |
| bpc = 0x00000001; |
| if (hp) { |
| bpc |= 0x00010100; /* address and mode are 2-bit */ |
| bpp = BSPI_BPP_MODE_SELECT_MASK; |
| } |
| break; |
| case SPI_NBITS_QUAD: |
| bpc = 0x00000002; |
| if (hp) { |
| bpc |= 0x00020200; /* address and mode are 4-bit */ |
| bpp |= BSPI_BPP_MODE_SELECT_MASK; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc, flex_mode); |
| |
| return 0; |
| } |
| |
| static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, |
| struct spi_flash_read_message *msg, |
| int hp) |
| { |
| int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; |
| int addrlen = msg->addr_width; |
| u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL); |
| |
| dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n", |
| width, addrlen, hp); |
| |
| switch (width) { |
| case SPI_NBITS_SINGLE: |
| /* clear quad/dual mode */ |
| data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD | |
| BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL); |
| break; |
| case SPI_NBITS_QUAD: |
| /* clear dual mode and set quad mode */ |
| data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL; |
| data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD; |
| break; |
| case SPI_NBITS_DUAL: |
| /* clear quad mode set dual mode */ |
| data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD; |
| data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (addrlen == BSPI_ADDRLEN_4BYTES) |
| /* set 4byte mode*/ |
| data |= BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE; |
| else |
| /* clear 4 byte mode */ |
| data &= ~BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE; |
| |
| /* set the override mode */ |
| data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE; |
| bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data); |
| bcm_qspi_bspi_set_xfer_params(qspi, msg->read_opcode, 0, 0, 0); |
| |
| return 0; |
| } |
| |
| static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi, |
| struct spi_flash_read_message *msg, int hp) |
| { |
| int error = 0; |
| int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; |
| int addrlen = msg->addr_width; |
| |
| /* default mode */ |
| qspi->xfer_mode.flex_mode = true; |
| |
| if (!bcm_qspi_bspi_ver_three(qspi)) { |
| u32 val, mask; |
| |
| val = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL); |
| mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE; |
| if (val & mask || qspi->s3_strap_override_ctrl & mask) { |
| qspi->xfer_mode.flex_mode = false; |
| bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0); |
| error = bcm_qspi_bspi_set_override(qspi, msg, hp); |
| } |
| } |
| |
| if (qspi->xfer_mode.flex_mode) |
| error = bcm_qspi_bspi_set_flex_mode(qspi, msg, hp); |
| |
| if (error) { |
| dev_warn(&qspi->pdev->dev, |
| "INVALID COMBINATION: width=%d addrlen=%d hp=%d\n", |
| width, addrlen, hp); |
| } else if (qspi->xfer_mode.width != width || |
| qspi->xfer_mode.addrlen != addrlen || |
| qspi->xfer_mode.hp != hp) { |
| qspi->xfer_mode.width = width; |
| qspi->xfer_mode.addrlen = addrlen; |
| qspi->xfer_mode.hp = hp; |
| dev_dbg(&qspi->pdev->dev, |
| "cs:%d %d-lane output, %d-byte address%s\n", |
| qspi->curr_cs, |
| qspi->xfer_mode.width, |
| qspi->xfer_mode.addrlen, |
| qspi->xfer_mode.hp != -1 ? ", hp mode" : ""); |
| } |
| |
| return error; |
| } |
| |
| static void bcm_qspi_enable_bspi(struct bcm_qspi *qspi) |
| { |
| if (!has_bspi(qspi)) |
| return; |
| |
| qspi->bspi_enabled = 1; |
| if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1) == 0) |
| return; |
| |
| bcm_qspi_bspi_flush_prefetch_buffers(qspi); |
| udelay(1); |
| bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 0); |
| udelay(1); |
| } |
| |
| static void bcm_qspi_disable_bspi(struct bcm_qspi *qspi) |
| { |
| if (!has_bspi(qspi)) |
| return; |
| |
| qspi->bspi_enabled = 0; |
| if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1)) |
| return; |
| |
| bcm_qspi_bspi_busy_poll(qspi); |
| bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 1); |
| udelay(1); |
| } |
| |
| static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs) |
| { |
| u32 rd = 0; |
| u32 wr = 0; |
| |
| if (cs >= 0 && qspi->base[CHIP_SELECT]) { |
| rd = bcm_qspi_read(qspi, CHIP_SELECT, 0); |
| wr = (rd & ~0xff) | (1 << cs); |
| if (rd == wr) |
| return; |
| bcm_qspi_write(qspi, CHIP_SELECT, 0, wr); |
| usleep_range(10, 20); |
| } |
| |
| dev_dbg(&qspi->pdev->dev, "using cs:%d\n", cs); |
| qspi->curr_cs = cs; |
| } |
| |
| /* MSPI helpers */ |
| static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi, |
| const struct bcm_qspi_parms *xp) |
| { |
| u32 spcr, spbr = 0; |
| |
| if (xp->speed_hz) |
| spbr = qspi->base_clk / (2 * xp->speed_hz); |
| |
| spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX); |
| bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr); |
| |
| spcr = MSPI_MASTER_BIT; |
| /* for 16 bit the data should be zero */ |
| if (xp->bits_per_word != 16) |
| spcr |= xp->bits_per_word << 2; |
| spcr |= xp->mode & 3; |
| bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr); |
| |
| qspi->last_parms = *xp; |
| } |
| |
| static void bcm_qspi_update_parms(struct bcm_qspi *qspi, |
| struct spi_device *spi, |
| struct spi_transfer *trans) |
| { |
| struct bcm_qspi_parms xp; |
| |
| xp.speed_hz = trans->speed_hz; |
| xp.bits_per_word = trans->bits_per_word; |
| xp.mode = spi->mode; |
| |
| bcm_qspi_hw_set_parms(qspi, &xp); |
| } |
| |
| static int bcm_qspi_setup(struct spi_device *spi) |
| { |
| struct bcm_qspi_parms *xp; |
| |
| if (spi->bits_per_word > 16) |
| return -EINVAL; |
| |
| xp = spi_get_ctldata(spi); |
| if (!xp) { |
| xp = kzalloc(sizeof(*xp), GFP_KERNEL); |
| if (!xp) |
| return -ENOMEM; |
| spi_set_ctldata(spi, xp); |
| } |
| xp->speed_hz = spi->max_speed_hz; |
| xp->mode = spi->mode; |
| |
| if (spi->bits_per_word) |
| xp->bits_per_word = spi->bits_per_word; |
| else |
| xp->bits_per_word = 8; |
| |
| return 0; |
| } |
| |
| static bool bcm_qspi_mspi_transfer_is_last(struct bcm_qspi *qspi, |
| struct qspi_trans *qt) |
| { |
| if (qt->mspi_last_trans && |
| spi_transfer_is_last(qspi->master, qt->trans)) |
| return true; |
| else |
| return false; |
| } |
| |
| static int update_qspi_trans_byte_count(struct bcm_qspi *qspi, |
| struct qspi_trans *qt, int flags) |
| { |
| int ret = TRANS_STATUS_BREAK_NONE; |
| |
| /* count the last transferred bytes */ |
| if (qt->trans->bits_per_word <= 8) |
| qt->byte++; |
| else |
| qt->byte += 2; |
| |
| if (qt->byte >= qt->trans->len) { |
| /* we're at the end of the spi_transfer */ |
| /* in TX mode, need to pause for a delay or CS change */ |
| if (qt->trans->delay_usecs && |
| (flags & TRANS_STATUS_BREAK_DELAY)) |
| ret |= TRANS_STATUS_BREAK_DELAY; |
| if (qt->trans->cs_change && |
| (flags & TRANS_STATUS_BREAK_CS_CHANGE)) |
| ret |= TRANS_STATUS_BREAK_CS_CHANGE; |
| if (ret) |
| goto done; |
| |
| dev_dbg(&qspi->pdev->dev, "advance msg exit\n"); |
| if (bcm_qspi_mspi_transfer_is_last(qspi, qt)) |
| ret = TRANS_STATUS_BREAK_EOM; |
| else |
| ret = TRANS_STATUS_BREAK_NO_BYTES; |
| |
| qt->trans = NULL; |
| } |
| |
| done: |
| dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n", |
| qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret); |
| return ret; |
| } |
| |
| static inline u8 read_rxram_slot_u8(struct bcm_qspi *qspi, int slot) |
| { |
| u32 slot_offset = MSPI_RXRAM + (slot << 3) + 0x4; |
| |
| /* mask out reserved bits */ |
| return bcm_qspi_read(qspi, MSPI, slot_offset) & 0xff; |
| } |
| |
| static inline u16 read_rxram_slot_u16(struct bcm_qspi *qspi, int slot) |
| { |
| u32 reg_offset = MSPI_RXRAM; |
| u32 lsb_offset = reg_offset + (slot << 3) + 0x4; |
| u32 msb_offset = reg_offset + (slot << 3); |
| |
| return (bcm_qspi_read(qspi, MSPI, lsb_offset) & 0xff) | |
| ((bcm_qspi_read(qspi, MSPI, msb_offset) & 0xff) << 8); |
| } |
| |
| static void read_from_hw(struct bcm_qspi *qspi, int slots) |
| { |
| struct qspi_trans tp; |
| int slot; |
| |
| bcm_qspi_disable_bspi(qspi); |
| |
| if (slots > MSPI_NUM_CDRAM) { |
| /* should never happen */ |
| dev_err(&qspi->pdev->dev, "%s: too many slots!\n", __func__); |
| return; |
| } |
| |
| tp = qspi->trans_pos; |
| |
| for (slot = 0; slot < slots; slot++) { |
| if (tp.trans->bits_per_word <= 8) { |
| u8 *buf = tp.trans->rx_buf; |
| |
| if (buf) |
| buf[tp.byte] = read_rxram_slot_u8(qspi, slot); |
| dev_dbg(&qspi->pdev->dev, "RD %02x\n", |
| buf ? buf[tp.byte] : 0x0); |
| } else { |
| u16 *buf = tp.trans->rx_buf; |
| |
| if (buf) |
| buf[tp.byte / 2] = read_rxram_slot_u16(qspi, |
| slot); |
| dev_dbg(&qspi->pdev->dev, "RD %04x\n", |
| buf ? buf[tp.byte / 2] : 0x0); |
| } |
| |
| update_qspi_trans_byte_count(qspi, &tp, |
| TRANS_STATUS_BREAK_NONE); |
| } |
| |
| qspi->trans_pos = tp; |
| } |
| |
| static inline void write_txram_slot_u8(struct bcm_qspi *qspi, int slot, |
| u8 val) |
| { |
| u32 reg_offset = MSPI_TXRAM + (slot << 3); |
| |
| /* mask out reserved bits */ |
| bcm_qspi_write(qspi, MSPI, reg_offset, val); |
| } |
| |
| static inline void write_txram_slot_u16(struct bcm_qspi *qspi, int slot, |
| u16 val) |
| { |
| u32 reg_offset = MSPI_TXRAM; |
| u32 msb_offset = reg_offset + (slot << 3); |
| u32 lsb_offset = reg_offset + (slot << 3) + 0x4; |
| |
| bcm_qspi_write(qspi, MSPI, msb_offset, (val >> 8)); |
| bcm_qspi_write(qspi, MSPI, lsb_offset, (val & 0xff)); |
| } |
| |
| static inline u32 read_cdram_slot(struct bcm_qspi *qspi, int slot) |
| { |
| return bcm_qspi_read(qspi, MSPI, MSPI_CDRAM + (slot << 2)); |
| } |
| |
| static inline void write_cdram_slot(struct bcm_qspi *qspi, int slot, u32 val) |
| { |
| bcm_qspi_write(qspi, MSPI, (MSPI_CDRAM + (slot << 2)), val); |
| } |
| |
| /* Return number of slots written */ |
| static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi) |
| { |
| struct qspi_trans tp; |
| int slot = 0, tstatus = 0; |
| u32 mspi_cdram = 0; |
| |
| bcm_qspi_disable_bspi(qspi); |
| tp = qspi->trans_pos; |
| bcm_qspi_update_parms(qspi, spi, tp.trans); |
| |
| /* Run until end of transfer or reached the max data */ |
| while (!tstatus && slot < MSPI_NUM_CDRAM) { |
| if (tp.trans->bits_per_word <= 8) { |
| const u8 *buf = tp.trans->tx_buf; |
| u8 val = buf ? buf[tp.byte] : 0x00; |
| |
| write_txram_slot_u8(qspi, slot, val); |
| dev_dbg(&qspi->pdev->dev, "WR %02x\n", val); |
| } else { |
| const u16 *buf = tp.trans->tx_buf; |
| u16 val = buf ? buf[tp.byte / 2] : 0x0000; |
| |
| write_txram_slot_u16(qspi, slot, val); |
| dev_dbg(&qspi->pdev->dev, "WR %04x\n", val); |
| } |
| mspi_cdram = MSPI_CDRAM_CONT_BIT; |
| |
| if (has_bspi(qspi)) |
| mspi_cdram &= ~1; |
| else |
| mspi_cdram |= (~(1 << spi->chip_select) & |
| MSPI_CDRAM_PCS); |
| |
| mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 : |
| MSPI_CDRAM_BITSE_BIT); |
| |
| write_cdram_slot(qspi, slot, mspi_cdram); |
| |
| tstatus = update_qspi_trans_byte_count(qspi, &tp, |
| TRANS_STATUS_BREAK_TX); |
| slot++; |
| } |
| |
| if (!slot) { |
| dev_err(&qspi->pdev->dev, "%s: no data to send?", __func__); |
| goto done; |
| } |
| |
| dev_dbg(&qspi->pdev->dev, "submitting %d slots\n", slot); |
| bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0); |
| bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1); |
| |
| if (tstatus & TRANS_STATUS_BREAK_DESELECT) { |
| mspi_cdram = read_cdram_slot(qspi, slot - 1) & |
| ~MSPI_CDRAM_CONT_BIT; |
| write_cdram_slot(qspi, slot - 1, mspi_cdram); |
| } |
| |
| if (has_bspi(qspi)) |
| bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 1); |
| |
| /* Must flush previous writes before starting MSPI operation */ |
| mb(); |
| /* Set cont | spe | spifie */ |
| bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0xe0); |
| |
| done: |
| return slot; |
| } |
| |
| static int bcm_qspi_bspi_flash_read(struct spi_device *spi, |
| struct spi_flash_read_message *msg) |
| { |
| struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); |
| u32 addr = 0, len, rdlen, len_words; |
| int ret = 0; |
| unsigned long timeo = msecs_to_jiffies(100); |
| struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; |
| |
| if (bcm_qspi_bspi_ver_three(qspi)) |
| if (msg->addr_width == BSPI_ADDRLEN_4BYTES) |
| return -EIO; |
| |
| bcm_qspi_chip_select(qspi, spi->chip_select); |
| bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); |
| |
| /* |
| * when using flex mode we need to send |
| * the upper address byte to bspi |
| */ |
| if (bcm_qspi_bspi_ver_three(qspi) == false) { |
| addr = msg->from & 0xff000000; |
| bcm_qspi_write(qspi, BSPI, |
| BSPI_BSPI_FLASH_UPPER_ADDR_BYTE, addr); |
| } |
| |
| if (!qspi->xfer_mode.flex_mode) |
| addr = msg->from; |
| else |
| addr = msg->from & 0x00ffffff; |
| |
| if (bcm_qspi_bspi_ver_three(qspi) == true) |
| addr = (addr + 0xc00000) & 0xffffff; |
| |
| /* |
| * read into the entire buffer by breaking the reads |
| * into RAF buffer read lengths |
| */ |
| len = msg->len; |
| qspi->bspi_rf_msg_idx = 0; |
| |
| do { |
| if (len > BSPI_READ_LENGTH) |
| rdlen = BSPI_READ_LENGTH; |
| else |
| rdlen = len; |
| |
| reinit_completion(&qspi->bspi_done); |
| bcm_qspi_enable_bspi(qspi); |
| len_words = (rdlen + 3) >> 2; |
| qspi->bspi_rf_msg = msg; |
| qspi->bspi_rf_msg_status = 0; |
| qspi->bspi_rf_msg_len = rdlen; |
| dev_dbg(&qspi->pdev->dev, |
| "bspi xfr addr 0x%x len 0x%x", addr, rdlen); |
| bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr); |
| bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words); |
| bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0); |
| if (qspi->soc_intc) { |
| /* |
| * clear soc MSPI and BSPI interrupts and enable |
| * BSPI interrupts. |
| */ |
| soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE); |
| soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true); |
| } |
| |
| /* Must flush previous writes before starting BSPI operation */ |
| mb(); |
| bcm_qspi_bspi_lr_start(qspi); |
| if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) { |
| dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n"); |
| ret = -ETIMEDOUT; |
| break; |
| } |
| |
| /* set msg return length */ |
| msg->retlen += rdlen; |
| addr += rdlen; |
| len -= rdlen; |
| } while (len); |
| |
| return ret; |
| } |
| |
| static int bcm_qspi_transfer_one(struct spi_master *master, |
| struct spi_device *spi, |
| struct spi_transfer *trans) |
| { |
| struct bcm_qspi *qspi = spi_master_get_devdata(master); |
| int slots; |
| unsigned long timeo = msecs_to_jiffies(100); |
| |
| bcm_qspi_chip_select(qspi, spi->chip_select); |
| qspi->trans_pos.trans = trans; |
| qspi->trans_pos.byte = 0; |
| |
| while (qspi->trans_pos.byte < trans->len) { |
| reinit_completion(&qspi->mspi_done); |
| |
| slots = write_to_hw(qspi, spi); |
| if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) { |
| dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n"); |
| return -ETIMEDOUT; |
| } |
| |
| read_from_hw(qspi, slots); |
| } |
| |
| return 0; |
| } |
| |
| static int bcm_qspi_mspi_flash_read(struct spi_device *spi, |
| struct spi_flash_read_message *msg) |
| { |
| struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); |
| struct spi_transfer t[2]; |
| u8 cmd[6]; |
| int ret; |
| |
| memset(cmd, 0, sizeof(cmd)); |
| memset(t, 0, sizeof(t)); |
| |
| /* tx */ |
| /* opcode is in cmd[0] */ |
| cmd[0] = msg->read_opcode; |
| cmd[1] = msg->from >> (msg->addr_width * 8 - 8); |
| cmd[2] = msg->from >> (msg->addr_width * 8 - 16); |
| cmd[3] = msg->from >> (msg->addr_width * 8 - 24); |
| cmd[4] = msg->from >> (msg->addr_width * 8 - 32); |
| t[0].tx_buf = cmd; |
| t[0].len = msg->addr_width + msg->dummy_bytes + 1; |
| t[0].bits_per_word = spi->bits_per_word; |
| t[0].tx_nbits = msg->opcode_nbits; |
| /* lets mspi know that this is not last transfer */ |
| qspi->trans_pos.mspi_last_trans = false; |
| ret = bcm_qspi_transfer_one(spi->master, spi, &t[0]); |
| |
| /* rx */ |
| qspi->trans_pos.mspi_last_trans = true; |
| if (!ret) { |
| /* rx */ |
| t[1].rx_buf = msg->buf; |
| t[1].len = msg->len; |
| t[1].rx_nbits = msg->data_nbits; |
| t[1].bits_per_word = spi->bits_per_word; |
| ret = bcm_qspi_transfer_one(spi->master, spi, &t[1]); |
| } |
| |
| if (!ret) |
| msg->retlen = msg->len; |
| |
| return ret; |
| } |
| |
| static int bcm_qspi_flash_read(struct spi_device *spi, |
| struct spi_flash_read_message *msg) |
| { |
| struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); |
| int ret = 0; |
| bool mspi_read = false; |
| u32 addr, len; |
| u_char *buf; |
| |
| buf = msg->buf; |
| addr = msg->from; |
| len = msg->len; |
| |
| if (bcm_qspi_bspi_ver_three(qspi) == true) { |
| /* |
| * The address coming into this function is a raw flash offset. |
| * But for BSPI <= V3, we need to convert it to a remapped BSPI |
| * address. If it crosses a 4MB boundary, just revert back to |
| * using MSPI. |
| */ |
| addr = (addr + 0xc00000) & 0xffffff; |
| |
| if ((~ADDR_4MB_MASK & addr) ^ |
| (~ADDR_4MB_MASK & (addr + len - 1))) |
| mspi_read = true; |
| } |
| |
| /* non-aligned and very short transfers are handled by MSPI */ |
| if (!IS_ALIGNED((uintptr_t)addr, 4) || !IS_ALIGNED((uintptr_t)buf, 4) || |
| len < 4) |
| mspi_read = true; |
| |
| if (mspi_read) |
| return bcm_qspi_mspi_flash_read(spi, msg); |
| |
| ret = bcm_qspi_bspi_set_mode(qspi, msg, -1); |
| |
| if (!ret) |
| ret = bcm_qspi_bspi_flash_read(spi, msg); |
| |
| return ret; |
| } |
| |
| static void bcm_qspi_cleanup(struct spi_device *spi) |
| { |
| struct bcm_qspi_parms *xp = spi_get_ctldata(spi); |
| |
| kfree(xp); |
| } |
| |
| static irqreturn_t bcm_qspi_mspi_l2_isr(int irq, void *dev_id) |
| { |
| struct bcm_qspi_dev_id *qspi_dev_id = dev_id; |
| struct bcm_qspi *qspi = qspi_dev_id->dev; |
| u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS); |
| |
| if (status & MSPI_MSPI_STATUS_SPIF) { |
| struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; |
| /* clear interrupt */ |
| status &= ~MSPI_MSPI_STATUS_SPIF; |
| bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status); |
| if (qspi->soc_intc) |
| soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_DONE); |
| complete(&qspi->mspi_done); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id) |
| { |
| struct bcm_qspi_dev_id *qspi_dev_id = dev_id; |
| struct bcm_qspi *qspi = qspi_dev_id->dev; |
| struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; |
| u32 status = qspi_dev_id->irqp->mask; |
| |
| if (qspi->bspi_enabled && qspi->bspi_rf_msg) { |
| bcm_qspi_bspi_lr_data_read(qspi); |
| if (qspi->bspi_rf_msg_len == 0) { |
| qspi->bspi_rf_msg = NULL; |
| if (qspi->soc_intc) { |
| /* disable soc BSPI interrupt */ |
| soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, |
| false); |
| /* indicate done */ |
| status = INTR_BSPI_LR_SESSION_DONE_MASK; |
| } |
| |
| if (qspi->bspi_rf_msg_status) |
| bcm_qspi_bspi_lr_clear(qspi); |
| else |
| bcm_qspi_bspi_flush_prefetch_buffers(qspi); |
| } |
| |
| if (qspi->soc_intc) |
| /* clear soc BSPI interrupt */ |
| soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_DONE); |
| } |
| |
| status &= INTR_BSPI_LR_SESSION_DONE_MASK; |
| if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0) |
| complete(&qspi->bspi_done); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t bcm_qspi_bspi_lr_err_l2_isr(int irq, void *dev_id) |
| { |
| struct bcm_qspi_dev_id *qspi_dev_id = dev_id; |
| struct bcm_qspi *qspi = qspi_dev_id->dev; |
| struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; |
| |
| dev_err(&qspi->pdev->dev, "BSPI INT error\n"); |
| qspi->bspi_rf_msg_status = -EIO; |
| if (qspi->soc_intc) |
| /* clear soc interrupt */ |
| soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_ERR); |
| |
| complete(&qspi->bspi_done); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t bcm_qspi_l1_isr(int irq, void *dev_id) |
| { |
| struct bcm_qspi_dev_id *qspi_dev_id = dev_id; |
| struct bcm_qspi *qspi = qspi_dev_id->dev; |
| struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (soc_intc) { |
| u32 status = soc_intc->bcm_qspi_get_int_status(soc_intc); |
| |
| if (status & MSPI_DONE) |
| ret = bcm_qspi_mspi_l2_isr(irq, dev_id); |
| else if (status & BSPI_DONE) |
| ret = bcm_qspi_bspi_lr_l2_isr(irq, dev_id); |
| else if (status & BSPI_ERR) |
| ret = bcm_qspi_bspi_lr_err_l2_isr(irq, dev_id); |
| } |
| |
| return ret; |
| } |
| |
| static const struct bcm_qspi_irq qspi_irq_tab[] = { |
| { |
| .irq_name = "spi_lr_fullness_reached", |
| .irq_handler = bcm_qspi_bspi_lr_l2_isr, |
| .mask = INTR_BSPI_LR_FULLNESS_REACHED_MASK, |
| }, |
| { |
| .irq_name = "spi_lr_session_aborted", |
| .irq_handler = bcm_qspi_bspi_lr_err_l2_isr, |
| .mask = INTR_BSPI_LR_SESSION_ABORTED_MASK, |
| }, |
| { |
| .irq_name = "spi_lr_impatient", |
| .irq_handler = bcm_qspi_bspi_lr_err_l2_isr, |
| .mask = INTR_BSPI_LR_IMPATIENT_MASK, |
| }, |
| { |
| .irq_name = "spi_lr_session_done", |
| .irq_handler = bcm_qspi_bspi_lr_l2_isr, |
| .mask = INTR_BSPI_LR_SESSION_DONE_MASK, |
| }, |
| #ifdef QSPI_INT_DEBUG |
| /* this interrupt is for debug purposes only, dont request irq */ |
| { |
| .irq_name = "spi_lr_overread", |
| .irq_handler = bcm_qspi_bspi_lr_err_l2_isr, |
| .mask = INTR_BSPI_LR_OVERREAD_MASK, |
| }, |
| #endif |
| { |
| .irq_name = "mspi_done", |
| .irq_handler = bcm_qspi_mspi_l2_isr, |
| .mask = INTR_MSPI_DONE_MASK, |
| }, |
| { |
| .irq_name = "mspi_halted", |
| .irq_handler = bcm_qspi_mspi_l2_isr, |
| .mask = INTR_MSPI_HALTED_MASK, |
| }, |
| { |
| /* single muxed L1 interrupt source */ |
| .irq_name = "spi_l1_intr", |
| .irq_handler = bcm_qspi_l1_isr, |
| .irq_source = MUXED_L1, |
| .mask = QSPI_INTERRUPTS_ALL, |
| }, |
| }; |
| |
| static void bcm_qspi_bspi_init(struct bcm_qspi *qspi) |
| { |
| u32 val = 0; |
| |
| val = bcm_qspi_read(qspi, BSPI, BSPI_REVISION_ID); |
| qspi->bspi_maj_rev = (val >> 8) & 0xff; |
| qspi->bspi_min_rev = val & 0xff; |
| if (!(bcm_qspi_bspi_ver_three(qspi))) { |
| /* Force mapping of BSPI address -> flash offset */ |
| bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_VALUE, 0); |
| bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_ENABLE, 1); |
| } |
| qspi->bspi_enabled = 1; |
| bcm_qspi_disable_bspi(qspi); |
| bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0); |
| bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0); |
| } |
| |
| static void bcm_qspi_hw_init(struct bcm_qspi *qspi) |
| { |
| struct bcm_qspi_parms parms; |
| |
| bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_LSB, 0); |
| bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_MSB, 0); |
| bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0); |
| bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, 0); |
| bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0x20); |
| |
| parms.mode = SPI_MODE_3; |
| parms.bits_per_word = 8; |
| parms.speed_hz = qspi->max_speed_hz; |
| bcm_qspi_hw_set_parms(qspi, &parms); |
| |
| if (has_bspi(qspi)) |
| bcm_qspi_bspi_init(qspi); |
| } |
| |
| static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi) |
| { |
| bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0); |
| if (has_bspi(qspi)) |
| bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); |
| |
| } |
| |
| static const struct of_device_id bcm_qspi_of_match[] = { |
| { .compatible = "brcm,spi-bcm-qspi" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, bcm_qspi_of_match); |
| |
| int bcm_qspi_probe(struct platform_device *pdev, |
| struct bcm_qspi_soc_intc *soc_intc) |
| { |
| struct device *dev = &pdev->dev; |
| struct bcm_qspi *qspi; |
| struct spi_master *master; |
| struct resource *res; |
| int irq, ret = 0, num_ints = 0; |
| u32 val; |
| const char *name = NULL; |
| int num_irqs = ARRAY_SIZE(qspi_irq_tab); |
| |
| /* We only support device-tree instantiation */ |
| if (!dev->of_node) |
| return -ENODEV; |
| |
| if (!of_match_node(bcm_qspi_of_match, dev->of_node)) |
| return -ENODEV; |
| |
| master = devm_spi_alloc_master(dev, sizeof(struct bcm_qspi)); |
| if (!master) { |
| dev_err(dev, "error allocating spi_master\n"); |
| return -ENOMEM; |
| } |
| |
| qspi = spi_master_get_devdata(master); |
| qspi->pdev = pdev; |
| qspi->trans_pos.trans = NULL; |
| qspi->trans_pos.byte = 0; |
| qspi->trans_pos.mspi_last_trans = true; |
| qspi->master = master; |
| |
| master->bus_num = -1; |
| master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD; |
| master->setup = bcm_qspi_setup; |
| master->transfer_one = bcm_qspi_transfer_one; |
| master->spi_flash_read = bcm_qspi_flash_read; |
| master->cleanup = bcm_qspi_cleanup; |
| master->dev.of_node = dev->of_node; |
| master->num_chipselect = NUM_CHIPSELECT; |
| |
| qspi->big_endian = of_device_is_big_endian(dev->of_node); |
| |
| if (!of_property_read_u32(dev->of_node, "num-cs", &val)) |
| master->num_chipselect = val; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hif_mspi"); |
| if (!res) |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "mspi"); |
| |
| if (res) { |
| qspi->base[MSPI] = devm_ioremap_resource(dev, res); |
| if (IS_ERR(qspi->base[MSPI])) |
| return PTR_ERR(qspi->base[MSPI]); |
| } else { |
| return 0; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "bspi"); |
| if (res) { |
| qspi->base[BSPI] = devm_ioremap_resource(dev, res); |
| if (IS_ERR(qspi->base[BSPI])) |
| return PTR_ERR(qspi->base[BSPI]); |
| qspi->bspi_mode = true; |
| } else { |
| qspi->bspi_mode = false; |
| } |
| |
| dev_info(dev, "using %smspi mode\n", qspi->bspi_mode ? "bspi-" : ""); |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg"); |
| if (res) { |
| qspi->base[CHIP_SELECT] = devm_ioremap_resource(dev, res); |
| if (IS_ERR(qspi->base[CHIP_SELECT])) |
| return PTR_ERR(qspi->base[CHIP_SELECT]); |
| } |
| |
| qspi->dev_ids = kcalloc(num_irqs, sizeof(struct bcm_qspi_dev_id), |
| GFP_KERNEL); |
| if (!qspi->dev_ids) |
| return -ENOMEM; |
| |
| for (val = 0; val < num_irqs; val++) { |
| irq = -1; |
| name = qspi_irq_tab[val].irq_name; |
| if (qspi_irq_tab[val].irq_source == SINGLE_L2) { |
| /* get the l2 interrupts */ |
| irq = platform_get_irq_byname(pdev, name); |
| } else if (!num_ints && soc_intc) { |
| /* all mspi, bspi intrs muxed to one L1 intr */ |
| irq = platform_get_irq(pdev, 0); |
| } |
| |
| if (irq >= 0) { |
| ret = devm_request_irq(&pdev->dev, irq, |
| qspi_irq_tab[val].irq_handler, 0, |
| name, |
| &qspi->dev_ids[val]); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "IRQ %s not found\n", name); |
| goto qspi_unprepare_err; |
| } |
| |
| qspi->dev_ids[val].dev = qspi; |
| qspi->dev_ids[val].irqp = &qspi_irq_tab[val]; |
| num_ints++; |
| dev_dbg(&pdev->dev, "registered IRQ %s %d\n", |
| qspi_irq_tab[val].irq_name, |
| irq); |
| } |
| } |
| |
| if (!num_ints) { |
| dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n"); |
| ret = -EINVAL; |
| goto qspi_unprepare_err; |
| } |
| |
| /* |
| * Some SoCs integrate spi controller (e.g., its interrupt bits) |
| * in specific ways |
| */ |
| if (soc_intc) { |
| qspi->soc_intc = soc_intc; |
| soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); |
| } else { |
| qspi->soc_intc = NULL; |
| } |
| |
| qspi->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(qspi->clk)) { |
| dev_warn(dev, "unable to get clock\n"); |
| ret = PTR_ERR(qspi->clk); |
| goto qspi_probe_err; |
| } |
| |
| ret = clk_prepare_enable(qspi->clk); |
| if (ret) { |
| dev_err(dev, "failed to prepare clock\n"); |
| goto qspi_probe_err; |
| } |
| |
| qspi->base_clk = clk_get_rate(qspi->clk); |
| qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2); |
| |
| bcm_qspi_hw_init(qspi); |
| init_completion(&qspi->mspi_done); |
| init_completion(&qspi->bspi_done); |
| qspi->curr_cs = -1; |
| |
| platform_set_drvdata(pdev, qspi); |
| |
| qspi->xfer_mode.width = -1; |
| qspi->xfer_mode.addrlen = -1; |
| qspi->xfer_mode.hp = -1; |
| |
| ret = spi_register_master(master); |
| if (ret < 0) { |
| dev_err(dev, "can't register master\n"); |
| goto qspi_reg_err; |
| } |
| |
| return 0; |
| |
| qspi_reg_err: |
| bcm_qspi_hw_uninit(qspi); |
| qspi_unprepare_err: |
| clk_disable_unprepare(qspi->clk); |
| qspi_probe_err: |
| kfree(qspi->dev_ids); |
| return ret; |
| } |
| /* probe function to be called by SoC specific platform driver probe */ |
| EXPORT_SYMBOL_GPL(bcm_qspi_probe); |
| |
| int bcm_qspi_remove(struct platform_device *pdev) |
| { |
| struct bcm_qspi *qspi = platform_get_drvdata(pdev); |
| |
| spi_unregister_master(qspi->master); |
| bcm_qspi_hw_uninit(qspi); |
| clk_disable_unprepare(qspi->clk); |
| kfree(qspi->dev_ids); |
| |
| return 0; |
| } |
| /* function to be called by SoC specific platform driver remove() */ |
| EXPORT_SYMBOL_GPL(bcm_qspi_remove); |
| |
| static int __maybe_unused bcm_qspi_suspend(struct device *dev) |
| { |
| struct bcm_qspi *qspi = dev_get_drvdata(dev); |
| |
| /* store the override strap value */ |
| if (!bcm_qspi_bspi_ver_three(qspi)) |
| qspi->s3_strap_override_ctrl = |
| bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL); |
| |
| spi_master_suspend(qspi->master); |
| clk_disable(qspi->clk); |
| bcm_qspi_hw_uninit(qspi); |
| |
| return 0; |
| }; |
| |
| static int __maybe_unused bcm_qspi_resume(struct device *dev) |
| { |
| struct bcm_qspi *qspi = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| bcm_qspi_hw_init(qspi); |
| bcm_qspi_chip_select(qspi, qspi->curr_cs); |
| if (qspi->soc_intc) |
| /* enable MSPI interrupt */ |
| qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE, |
| true); |
| |
| ret = clk_enable(qspi->clk); |
| if (!ret) |
| spi_master_resume(qspi->master); |
| |
| return ret; |
| } |
| |
| SIMPLE_DEV_PM_OPS(bcm_qspi_pm_ops, bcm_qspi_suspend, bcm_qspi_resume); |
| |
| /* pm_ops to be called by SoC specific platform driver */ |
| EXPORT_SYMBOL_GPL(bcm_qspi_pm_ops); |
| |
| MODULE_AUTHOR("Kamal Dasu"); |
| MODULE_DESCRIPTION("Broadcom QSPI driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |