| /* |
| * INET An implementation of the TCP/IP protocol suite for the LINUX |
| * operating system. INET is implemented using the BSD Socket |
| * interface as the means of communication with the user level. |
| * |
| * Pseudo-driver for the loopback interface. |
| * |
| * Version: @(#)loopback.c 1.0.4b 08/16/93 |
| * |
| * Authors: Ross Biro |
| * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> |
| * Donald Becker, <becker@scyld.com> |
| * |
| * Alan Cox : Fixed oddments for NET3.014 |
| * Alan Cox : Rejig for NET3.029 snap #3 |
| * Alan Cox : Fixed NET3.029 bugs and sped up |
| * Larry McVoy : Tiny tweak to double performance |
| * Alan Cox : Backed out LMV's tweak - the linux mm |
| * can't take it... |
| * Michael Griffith: Don't bother computing the checksums |
| * on packets received on the loopback |
| * interface. |
| * Alexey Kuznetsov: Potential hang under some extreme |
| * cases removed. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/jiffies.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/fs.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/socket.h> |
| #include <linux/errno.h> |
| #include <linux/fcntl.h> |
| #include <linux/in.h> |
| #include <linux/init.h> |
| |
| #include <asm/system.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| #include <linux/inet.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/ethtool.h> |
| #include <net/sock.h> |
| #include <net/checksum.h> |
| #include <linux/if_ether.h> /* For the statistics structure. */ |
| #include <linux/if_arp.h> /* For ARPHRD_ETHER */ |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/percpu.h> |
| |
| struct pcpu_lstats { |
| unsigned long packets; |
| unsigned long bytes; |
| }; |
| static DEFINE_PER_CPU(struct pcpu_lstats, pcpu_lstats); |
| |
| #define LOOPBACK_OVERHEAD (128 + MAX_HEADER + 16 + 16) |
| |
| /* KISS: just allocate small chunks and copy bits. |
| * |
| * So, in fact, this is documentation, explaining what we expect |
| * of largesending device modulo TCP checksum, which is ignored for loopback. |
| */ |
| |
| #ifdef LOOPBACK_TSO |
| static void emulate_large_send_offload(struct sk_buff *skb) |
| { |
| struct iphdr *iph = ip_hdr(skb); |
| struct tcphdr *th = (struct tcphdr *)(skb_network_header(skb) + |
| (iph->ihl * 4)); |
| unsigned int doffset = (iph->ihl + th->doff) * 4; |
| unsigned int mtu = skb_shinfo(skb)->gso_size + doffset; |
| unsigned int offset = 0; |
| u32 seq = ntohl(th->seq); |
| u16 id = ntohs(iph->id); |
| |
| while (offset + doffset < skb->len) { |
| unsigned int frag_size = min(mtu, skb->len - offset) - doffset; |
| struct sk_buff *nskb = alloc_skb(mtu + 32, GFP_ATOMIC); |
| |
| if (!nskb) |
| break; |
| skb_reserve(nskb, 32); |
| skb_set_mac_header(nskb, -ETH_HLEN); |
| skb_reset_network_header(nskb); |
| iph = ip_hdr(nskb); |
| skb_copy_to_linear_data(nskb, skb_network_header(skb), |
| doffset); |
| if (skb_copy_bits(skb, |
| doffset + offset, |
| nskb->data + doffset, |
| frag_size)) |
| BUG(); |
| skb_put(nskb, doffset + frag_size); |
| nskb->ip_summed = CHECKSUM_UNNECESSARY; |
| nskb->dev = skb->dev; |
| nskb->priority = skb->priority; |
| nskb->protocol = skb->protocol; |
| nskb->dst = dst_clone(skb->dst); |
| memcpy(nskb->cb, skb->cb, sizeof(skb->cb)); |
| nskb->pkt_type = skb->pkt_type; |
| |
| th = (struct tcphdr *)(skb_network_header(nskb) + iph->ihl * 4); |
| iph->tot_len = htons(frag_size + doffset); |
| iph->id = htons(id); |
| iph->check = 0; |
| iph->check = ip_fast_csum((unsigned char *) iph, iph->ihl); |
| th->seq = htonl(seq); |
| if (offset + doffset + frag_size < skb->len) |
| th->fin = th->psh = 0; |
| netif_rx(nskb); |
| offset += frag_size; |
| seq += frag_size; |
| id++; |
| } |
| |
| dev_kfree_skb(skb); |
| } |
| #endif /* LOOPBACK_TSO */ |
| |
| /* |
| * The higher levels take care of making this non-reentrant (it's |
| * called with bh's disabled). |
| */ |
| static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct pcpu_lstats *lb_stats; |
| |
| skb_orphan(skb); |
| |
| skb->protocol = eth_type_trans(skb,dev); |
| #ifndef LOOPBACK_MUST_CHECKSUM |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| #endif |
| |
| #ifdef LOOPBACK_TSO |
| if (skb_is_gso(skb)) { |
| BUG_ON(skb->protocol != htons(ETH_P_IP)); |
| BUG_ON(ip_hdr(skb)->protocol != IPPROTO_TCP); |
| |
| emulate_large_send_offload(skb); |
| return 0; |
| } |
| #endif |
| dev->last_rx = jiffies; |
| |
| /* it's OK to use __get_cpu_var() because BHs are off */ |
| lb_stats = &__get_cpu_var(pcpu_lstats); |
| lb_stats->bytes += skb->len; |
| lb_stats->packets++; |
| |
| netif_rx(skb); |
| |
| return 0; |
| } |
| |
| static struct net_device_stats loopback_stats; |
| |
| static struct net_device_stats *get_stats(struct net_device *dev) |
| { |
| struct net_device_stats *stats = &loopback_stats; |
| unsigned long bytes = 0; |
| unsigned long packets = 0; |
| int i; |
| |
| for_each_possible_cpu(i) { |
| const struct pcpu_lstats *lb_stats; |
| |
| lb_stats = &per_cpu(pcpu_lstats, i); |
| bytes += lb_stats->bytes; |
| packets += lb_stats->packets; |
| } |
| stats->rx_packets = packets; |
| stats->tx_packets = packets; |
| stats->rx_bytes = bytes; |
| stats->tx_bytes = bytes; |
| return stats; |
| } |
| |
| static u32 always_on(struct net_device *dev) |
| { |
| return 1; |
| } |
| |
| static const struct ethtool_ops loopback_ethtool_ops = { |
| .get_link = always_on, |
| .get_tso = ethtool_op_get_tso, |
| .set_tso = ethtool_op_set_tso, |
| .get_tx_csum = always_on, |
| .get_sg = always_on, |
| .get_rx_csum = always_on, |
| }; |
| |
| /* |
| * The loopback device is special. There is only one instance and |
| * it is statically allocated. Don't do this for other devices. |
| */ |
| struct net_device loopback_dev = { |
| .name = "lo", |
| .get_stats = &get_stats, |
| .priv = &loopback_stats, |
| .mtu = (16 * 1024) + 20 + 20 + 12, |
| .hard_start_xmit = loopback_xmit, |
| .hard_header = eth_header, |
| .hard_header_cache = eth_header_cache, |
| .header_cache_update = eth_header_cache_update, |
| .hard_header_len = ETH_HLEN, /* 14 */ |
| .addr_len = ETH_ALEN, /* 6 */ |
| .tx_queue_len = 0, |
| .type = ARPHRD_LOOPBACK, /* 0x0001*/ |
| .rebuild_header = eth_rebuild_header, |
| .flags = IFF_LOOPBACK, |
| .features = NETIF_F_SG | NETIF_F_FRAGLIST |
| #ifdef LOOPBACK_TSO |
| | NETIF_F_TSO |
| #endif |
| | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA |
| | NETIF_F_LLTX, |
| .ethtool_ops = &loopback_ethtool_ops, |
| }; |
| |
| /* Setup and register the loopback device. */ |
| static int __init loopback_init(void) |
| { |
| return register_netdev(&loopback_dev); |
| }; |
| |
| module_init(loopback_init); |
| |
| EXPORT_SYMBOL(loopback_dev); |