| /* |
| * ST Thermal Sensor Driver core routines |
| * Author: Ajit Pal Singh <ajitpal.singh@st.com> |
| * |
| * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| |
| #include "st_thermal.h" |
| |
| /* The Thermal Framework expects millidegrees */ |
| #define mcelsius(temp) ((temp) * 1000) |
| |
| /* |
| * Function to allocate regfields which are common |
| * between syscfg and memory mapped based sensors |
| */ |
| int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor) |
| { |
| struct device *dev = sensor->dev; |
| struct regmap *regmap = sensor->regmap; |
| const struct reg_field *reg_fields = sensor->cdata->reg_fields; |
| |
| sensor->dcorrect = devm_regmap_field_alloc(dev, regmap, |
| reg_fields[DCORRECT]); |
| |
| sensor->overflow = devm_regmap_field_alloc(dev, regmap, |
| reg_fields[OVERFLOW]); |
| |
| sensor->temp_data = devm_regmap_field_alloc(dev, regmap, |
| reg_fields[DATA]); |
| |
| if (IS_ERR(sensor->dcorrect) || |
| IS_ERR(sensor->overflow) || |
| IS_ERR(sensor->temp_data)) { |
| dev_err(dev, "failed to allocate common regfields\n"); |
| return -EINVAL; |
| } |
| |
| return sensor->ops->alloc_regfields(sensor); |
| } |
| |
| static int st_thermal_sensor_on(struct st_thermal_sensor *sensor) |
| { |
| int ret; |
| struct device *dev = sensor->dev; |
| |
| ret = clk_prepare_enable(sensor->clk); |
| if (ret) { |
| dev_err(dev, "failed to enable clk\n"); |
| return ret; |
| } |
| |
| ret = sensor->ops->power_ctrl(sensor, POWER_ON); |
| if (ret) { |
| dev_err(dev, "failed to power on sensor\n"); |
| clk_disable_unprepare(sensor->clk); |
| } |
| |
| return ret; |
| } |
| |
| static int st_thermal_sensor_off(struct st_thermal_sensor *sensor) |
| { |
| int ret; |
| |
| ret = sensor->ops->power_ctrl(sensor, POWER_OFF); |
| if (ret) |
| return ret; |
| |
| clk_disable_unprepare(sensor->clk); |
| |
| return 0; |
| } |
| |
| static int st_thermal_calibration(struct st_thermal_sensor *sensor) |
| { |
| int ret; |
| unsigned int val; |
| struct device *dev = sensor->dev; |
| |
| /* Check if sensor calibration data is already written */ |
| ret = regmap_field_read(sensor->dcorrect, &val); |
| if (ret) { |
| dev_err(dev, "failed to read calibration data\n"); |
| return ret; |
| } |
| |
| if (!val) { |
| /* |
| * Sensor calibration value not set by bootloader, |
| * default calibration data to be used |
| */ |
| ret = regmap_field_write(sensor->dcorrect, |
| sensor->cdata->calibration_val); |
| if (ret) |
| dev_err(dev, "failed to set calibration data\n"); |
| } |
| |
| return ret; |
| } |
| |
| /* Callback to get temperature from HW*/ |
| static int st_thermal_get_temp(struct thermal_zone_device *th, |
| unsigned long *temperature) |
| { |
| struct st_thermal_sensor *sensor = th->devdata; |
| struct device *dev = sensor->dev; |
| unsigned int temp; |
| unsigned int overflow; |
| int ret; |
| |
| ret = regmap_field_read(sensor->overflow, &overflow); |
| if (ret) |
| return ret; |
| if (overflow) |
| return -EIO; |
| |
| ret = regmap_field_read(sensor->temp_data, &temp); |
| if (ret) |
| return ret; |
| |
| temp += sensor->cdata->temp_adjust_val; |
| temp = mcelsius(temp); |
| |
| dev_dbg(dev, "temperature: %d\n", temp); |
| |
| *temperature = temp; |
| |
| return 0; |
| } |
| |
| static int st_thermal_get_trip_type(struct thermal_zone_device *th, |
| int trip, enum thermal_trip_type *type) |
| { |
| struct st_thermal_sensor *sensor = th->devdata; |
| struct device *dev = sensor->dev; |
| |
| switch (trip) { |
| case 0: |
| *type = THERMAL_TRIP_CRITICAL; |
| break; |
| default: |
| dev_err(dev, "invalid trip point\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int st_thermal_get_trip_temp(struct thermal_zone_device *th, |
| int trip, unsigned long *temp) |
| { |
| struct st_thermal_sensor *sensor = th->devdata; |
| struct device *dev = sensor->dev; |
| |
| switch (trip) { |
| case 0: |
| *temp = mcelsius(sensor->cdata->crit_temp); |
| break; |
| default: |
| dev_err(dev, "Invalid trip point\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct thermal_zone_device_ops st_tz_ops = { |
| .get_temp = st_thermal_get_temp, |
| .get_trip_type = st_thermal_get_trip_type, |
| .get_trip_temp = st_thermal_get_trip_temp, |
| }; |
| |
| int st_thermal_register(struct platform_device *pdev, |
| const struct of_device_id *st_thermal_of_match) |
| { |
| struct st_thermal_sensor *sensor; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| const struct of_device_id *match; |
| |
| int polling_delay; |
| int ret; |
| |
| if (!np) { |
| dev_err(dev, "device tree node not found\n"); |
| return -EINVAL; |
| } |
| |
| sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); |
| if (!sensor) |
| return -ENOMEM; |
| |
| sensor->dev = dev; |
| |
| match = of_match_device(st_thermal_of_match, dev); |
| if (!(match && match->data)) |
| return -EINVAL; |
| |
| sensor->cdata = match->data; |
| if (!sensor->cdata->ops) |
| return -EINVAL; |
| |
| sensor->ops = sensor->cdata->ops; |
| |
| ret = sensor->ops->regmap_init(sensor); |
| if (ret) |
| return ret; |
| |
| ret = st_thermal_alloc_regfields(sensor); |
| if (ret) |
| return ret; |
| |
| sensor->clk = devm_clk_get(dev, "thermal"); |
| if (IS_ERR(sensor->clk)) { |
| dev_err(dev, "failed to fetch clock\n"); |
| return PTR_ERR(sensor->clk); |
| } |
| |
| if (sensor->ops->register_enable_irq) { |
| ret = sensor->ops->register_enable_irq(sensor); |
| if (ret) |
| return ret; |
| } |
| |
| ret = st_thermal_sensor_on(sensor); |
| if (ret) |
| return ret; |
| |
| ret = st_thermal_calibration(sensor); |
| if (ret) |
| goto sensor_off; |
| |
| polling_delay = sensor->ops->register_enable_irq ? 0 : 1000; |
| |
| sensor->thermal_dev = |
| thermal_zone_device_register(dev_name(dev), 1, 0, sensor, |
| &st_tz_ops, NULL, 0, polling_delay); |
| if (IS_ERR(sensor->thermal_dev)) { |
| dev_err(dev, "failed to register thermal zone device\n"); |
| ret = PTR_ERR(sensor->thermal_dev); |
| goto sensor_off; |
| } |
| |
| platform_set_drvdata(pdev, sensor); |
| |
| return 0; |
| |
| sensor_off: |
| st_thermal_sensor_off(sensor); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(st_thermal_register); |
| |
| int st_thermal_unregister(struct platform_device *pdev) |
| { |
| struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); |
| |
| st_thermal_sensor_off(sensor); |
| thermal_zone_device_unregister(sensor->thermal_dev); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(st_thermal_unregister); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int st_thermal_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); |
| |
| return st_thermal_sensor_off(sensor); |
| } |
| |
| static int st_thermal_resume(struct device *dev) |
| { |
| int ret; |
| struct platform_device *pdev = to_platform_device(dev); |
| struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); |
| |
| ret = st_thermal_sensor_on(sensor); |
| if (ret) |
| return ret; |
| |
| ret = st_thermal_calibration(sensor); |
| if (ret) |
| return ret; |
| |
| if (sensor->ops->enable_irq) { |
| ret = sensor->ops->enable_irq(sensor); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume); |
| EXPORT_SYMBOL_GPL(st_thermal_pm_ops); |
| |
| MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver"); |
| MODULE_LICENSE("GPL v2"); |