| /* |
| * CDC Ethernet based networking peripherals |
| * Copyright (C) 2003-2005 by David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| // #define DEBUG // error path messages, extra info |
| // #define VERBOSE // more; success messages |
| |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ctype.h> |
| #include <linux/ethtool.h> |
| #include <linux/workqueue.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/usb/cdc.h> |
| |
| #include "usbnet.h" |
| |
| |
| /* |
| * probes control interface, claims data interface, collects the bulk |
| * endpoints, activates data interface (if needed), maybe sets MTU. |
| * all pure cdc, except for certain firmware workarounds, and knowing |
| * that rndis uses one different rule. |
| */ |
| int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| u8 *buf = intf->cur_altsetting->extra; |
| int len = intf->cur_altsetting->extralen; |
| struct usb_interface_descriptor *d; |
| struct cdc_state *info = (void *) &dev->data; |
| int status; |
| int rndis; |
| struct usb_driver *driver = driver_of(intf); |
| |
| if (sizeof dev->data < sizeof *info) |
| return -EDOM; |
| |
| /* expect strict spec conformance for the descriptors, but |
| * cope with firmware which stores them in the wrong place |
| */ |
| if (len == 0 && dev->udev->actconfig->extralen) { |
| /* Motorola SB4100 (and others: Brad Hards says it's |
| * from a Broadcom design) put CDC descriptors here |
| */ |
| buf = dev->udev->actconfig->extra; |
| len = dev->udev->actconfig->extralen; |
| if (len) |
| dev_dbg(&intf->dev, |
| "CDC descriptors on config\n"); |
| } |
| |
| /* this assumes that if there's a non-RNDIS vendor variant |
| * of cdc-acm, it'll fail RNDIS requests cleanly. |
| */ |
| rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff); |
| |
| memset(info, 0, sizeof *info); |
| info->control = intf; |
| while (len > 3) { |
| if (buf [1] != USB_DT_CS_INTERFACE) |
| goto next_desc; |
| |
| /* use bDescriptorSubType to identify the CDC descriptors. |
| * We expect devices with CDC header and union descriptors. |
| * For CDC Ethernet we need the ethernet descriptor. |
| * For RNDIS, ignore two (pointless) CDC modem descriptors |
| * in favor of a complicated OID-based RPC scheme doing what |
| * CDC Ethernet achieves with a simple descriptor. |
| */ |
| switch (buf [2]) { |
| case USB_CDC_HEADER_TYPE: |
| if (info->header) { |
| dev_dbg(&intf->dev, "extra CDC header\n"); |
| goto bad_desc; |
| } |
| info->header = (void *) buf; |
| if (info->header->bLength != sizeof *info->header) { |
| dev_dbg(&intf->dev, "CDC header len %u\n", |
| info->header->bLength); |
| goto bad_desc; |
| } |
| break; |
| case USB_CDC_UNION_TYPE: |
| if (info->u) { |
| dev_dbg(&intf->dev, "extra CDC union\n"); |
| goto bad_desc; |
| } |
| info->u = (void *) buf; |
| if (info->u->bLength != sizeof *info->u) { |
| dev_dbg(&intf->dev, "CDC union len %u\n", |
| info->u->bLength); |
| goto bad_desc; |
| } |
| |
| /* we need a master/control interface (what we're |
| * probed with) and a slave/data interface; union |
| * descriptors sort this all out. |
| */ |
| info->control = usb_ifnum_to_if(dev->udev, |
| info->u->bMasterInterface0); |
| info->data = usb_ifnum_to_if(dev->udev, |
| info->u->bSlaveInterface0); |
| if (!info->control || !info->data) { |
| dev_dbg(&intf->dev, |
| "master #%u/%p slave #%u/%p\n", |
| info->u->bMasterInterface0, |
| info->control, |
| info->u->bSlaveInterface0, |
| info->data); |
| goto bad_desc; |
| } |
| if (info->control != intf) { |
| dev_dbg(&intf->dev, "bogus CDC Union\n"); |
| /* Ambit USB Cable Modem (and maybe others) |
| * interchanges master and slave interface. |
| */ |
| if (info->data == intf) { |
| info->data = info->control; |
| info->control = intf; |
| } else |
| goto bad_desc; |
| } |
| |
| /* a data interface altsetting does the real i/o */ |
| d = &info->data->cur_altsetting->desc; |
| if (d->bInterfaceClass != USB_CLASS_CDC_DATA) { |
| dev_dbg(&intf->dev, "slave class %u\n", |
| d->bInterfaceClass); |
| goto bad_desc; |
| } |
| break; |
| case USB_CDC_ETHERNET_TYPE: |
| if (info->ether) { |
| dev_dbg(&intf->dev, "extra CDC ether\n"); |
| goto bad_desc; |
| } |
| info->ether = (void *) buf; |
| if (info->ether->bLength != sizeof *info->ether) { |
| dev_dbg(&intf->dev, "CDC ether len %u\n", |
| info->ether->bLength); |
| goto bad_desc; |
| } |
| dev->hard_mtu = le16_to_cpu( |
| info->ether->wMaxSegmentSize); |
| /* because of Zaurus, we may be ignoring the host |
| * side link address we were given. |
| */ |
| break; |
| } |
| next_desc: |
| len -= buf [0]; /* bLength */ |
| buf += buf [0]; |
| } |
| |
| if (!info->header || !info->u || (!rndis && !info->ether)) { |
| dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n", |
| info->header ? "" : "header ", |
| info->u ? "" : "union ", |
| info->ether ? "" : "ether "); |
| goto bad_desc; |
| } |
| |
| /* claim data interface and set it up ... with side effects. |
| * network traffic can't flow until an altsetting is enabled. |
| */ |
| status = usb_driver_claim_interface(driver, info->data, dev); |
| if (status < 0) |
| return status; |
| status = usbnet_get_endpoints(dev, info->data); |
| if (status < 0) { |
| /* ensure immediate exit from usbnet_disconnect */ |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface(driver, info->data); |
| return status; |
| } |
| |
| /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */ |
| dev->status = NULL; |
| if (info->control->cur_altsetting->desc.bNumEndpoints == 1) { |
| struct usb_endpoint_descriptor *desc; |
| |
| dev->status = &info->control->cur_altsetting->endpoint [0]; |
| desc = &dev->status->desc; |
| if (!usb_endpoint_is_int_in(desc) |
| || (le16_to_cpu(desc->wMaxPacketSize) |
| < sizeof(struct usb_cdc_notification)) |
| || !desc->bInterval) { |
| dev_dbg(&intf->dev, "bad notification endpoint\n"); |
| dev->status = NULL; |
| } |
| } |
| if (rndis && !dev->status) { |
| dev_dbg(&intf->dev, "missing RNDIS status endpoint\n"); |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface(driver, info->data); |
| return -ENODEV; |
| } |
| return 0; |
| |
| bad_desc: |
| dev_info(&dev->udev->dev, "bad CDC descriptors\n"); |
| return -ENODEV; |
| } |
| EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind); |
| |
| void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct cdc_state *info = (void *) &dev->data; |
| struct usb_driver *driver = driver_of(intf); |
| |
| /* disconnect master --> disconnect slave */ |
| if (intf == info->control && info->data) { |
| /* ensure immediate exit from usbnet_disconnect */ |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface(driver, info->data); |
| info->data = NULL; |
| } |
| |
| /* and vice versa (just in case) */ |
| else if (intf == info->data && info->control) { |
| /* ensure immediate exit from usbnet_disconnect */ |
| usb_set_intfdata(info->control, NULL); |
| usb_driver_release_interface(driver, info->control); |
| info->control = NULL; |
| } |
| } |
| EXPORT_SYMBOL_GPL(usbnet_cdc_unbind); |
| |
| |
| /*------------------------------------------------------------------------- |
| * |
| * Communications Device Class, Ethernet Control model |
| * |
| * Takes two interfaces. The DATA interface is inactive till an altsetting |
| * is selected. Configuration data includes class descriptors. There's |
| * an optional status endpoint on the control interface. |
| * |
| * This should interop with whatever the 2.4 "CDCEther.c" driver |
| * (by Brad Hards) talked with, with more functionality. |
| * |
| *-------------------------------------------------------------------------*/ |
| |
| static void dumpspeed(struct usbnet *dev, __le32 *speeds) |
| { |
| if (netif_msg_timer(dev)) |
| devinfo(dev, "link speeds: %u kbps up, %u kbps down", |
| __le32_to_cpu(speeds[0]) / 1000, |
| __le32_to_cpu(speeds[1]) / 1000); |
| } |
| |
| static void cdc_status(struct usbnet *dev, struct urb *urb) |
| { |
| struct usb_cdc_notification *event; |
| |
| if (urb->actual_length < sizeof *event) |
| return; |
| |
| /* SPEED_CHANGE can get split into two 8-byte packets */ |
| if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) { |
| dumpspeed(dev, (__le32 *) urb->transfer_buffer); |
| return; |
| } |
| |
| event = urb->transfer_buffer; |
| switch (event->bNotificationType) { |
| case USB_CDC_NOTIFY_NETWORK_CONNECTION: |
| if (netif_msg_timer(dev)) |
| devdbg(dev, "CDC: carrier %s", |
| event->wValue ? "on" : "off"); |
| if (event->wValue) |
| netif_carrier_on(dev->net); |
| else |
| netif_carrier_off(dev->net); |
| break; |
| case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */ |
| if (netif_msg_timer(dev)) |
| devdbg(dev, "CDC: speed change (len %d)", |
| urb->actual_length); |
| if (urb->actual_length != (sizeof *event + 8)) |
| set_bit(EVENT_STS_SPLIT, &dev->flags); |
| else |
| dumpspeed(dev, (__le32 *) &event[1]); |
| break; |
| /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS), |
| * but there are no standard formats for the response data. |
| */ |
| default: |
| deverr(dev, "CDC: unexpected notification %02x!", |
| event->bNotificationType); |
| break; |
| } |
| } |
| |
| static u8 nibble(unsigned char c) |
| { |
| if (likely(isdigit(c))) |
| return c - '0'; |
| c = toupper(c); |
| if (likely(isxdigit(c))) |
| return 10 + c - 'A'; |
| return 0; |
| } |
| |
| static inline int |
| get_ethernet_addr(struct usbnet *dev, struct usb_cdc_ether_desc *e) |
| { |
| int tmp, i; |
| unsigned char buf [13]; |
| |
| tmp = usb_string(dev->udev, e->iMACAddress, buf, sizeof buf); |
| if (tmp != 12) { |
| dev_dbg(&dev->udev->dev, |
| "bad MAC string %d fetch, %d\n", e->iMACAddress, tmp); |
| if (tmp >= 0) |
| tmp = -EINVAL; |
| return tmp; |
| } |
| for (i = tmp = 0; i < 6; i++, tmp += 2) |
| dev->net->dev_addr [i] = |
| (nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]); |
| return 0; |
| } |
| |
| static int cdc_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| int status; |
| struct cdc_state *info = (void *) &dev->data; |
| |
| status = usbnet_generic_cdc_bind(dev, intf); |
| if (status < 0) |
| return status; |
| |
| status = get_ethernet_addr(dev, info->ether); |
| if (status < 0) { |
| usb_set_intfdata(info->data, NULL); |
| usb_driver_release_interface(driver_of(intf), info->data); |
| return status; |
| } |
| |
| /* FIXME cdc-ether has some multicast code too, though it complains |
| * in routine cases. info->ether describes the multicast support. |
| * Implement that here, manipulating the cdc filter as needed. |
| */ |
| return 0; |
| } |
| |
| static const struct driver_info cdc_info = { |
| .description = "CDC Ethernet Device", |
| .flags = FLAG_ETHER, |
| // .check_connect = cdc_check_connect, |
| .bind = cdc_bind, |
| .unbind = usbnet_cdc_unbind, |
| .status = cdc_status, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| |
| static const struct usb_device_id products [] = { |
| /* |
| * BLACKLIST !! |
| * |
| * First blacklist any products that are egregiously nonconformant |
| * with the CDC Ethernet specs. Minor braindamage we cope with; when |
| * they're not even trying, needing a separate driver is only the first |
| * of the differences to show up. |
| */ |
| |
| #define ZAURUS_MASTER_INTERFACE \ |
| .bInterfaceClass = USB_CLASS_COMM, \ |
| .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ |
| .bInterfaceProtocol = USB_CDC_PROTO_NONE |
| |
| /* SA-1100 based Sharp Zaurus ("collie"), or compatible; |
| * wire-incompatible with true CDC Ethernet implementations. |
| * (And, it seems, needlessly so...) |
| */ |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x8004, |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = 0, |
| }, |
| |
| /* PXA-25x based Sharp Zaurii. Note that it seems some of these |
| * (later models especially) may have shipped only with firmware |
| * advertising false "CDC MDLM" compatibility ... but we're not |
| * clear which models did that, so for now let's assume the worst. |
| */ |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x8005, /* A-300 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = 0, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x8006, /* B-500/SL-5600 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = 0, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x8007, /* C-700 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = 0, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x9031, /* C-750 C-760 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = 0, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| .idProduct = 0x9032, /* SL-6000 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = 0, |
| }, { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x04DD, |
| /* reported with some C860 units */ |
| .idProduct = 0x9050, /* C-860 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = 0, |
| }, |
| |
| /* Olympus has some models with a Zaurus-compatible option. |
| * R-1000 uses a FreeScale i.MXL cpu (ARMv4T) |
| */ |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_INFO |
| | USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x07B4, |
| .idProduct = 0x0F02, /* R-1000 */ |
| ZAURUS_MASTER_INTERFACE, |
| .driver_info = 0, |
| }, |
| |
| /* |
| * WHITELIST!!! |
| * |
| * CDC Ether uses two interfaces, not necessarily consecutive. |
| * We match the main interface, ignoring the optional device |
| * class so we could handle devices that aren't exclusively |
| * CDC ether. |
| * |
| * NOTE: this match must come AFTER entries blacklisting devices |
| * because of bugs/quirks in a given product (like Zaurus, above). |
| */ |
| { |
| USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, |
| USB_CDC_PROTO_NONE), |
| .driver_info = (unsigned long) &cdc_info, |
| }, |
| { }, // END |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver cdc_driver = { |
| .name = "cdc_ether", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .disconnect = usbnet_disconnect, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| }; |
| |
| |
| static int __init cdc_init(void) |
| { |
| BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) |
| < sizeof(struct cdc_state))); |
| |
| return usb_register(&cdc_driver); |
| } |
| module_init(cdc_init); |
| |
| static void __exit cdc_exit(void) |
| { |
| usb_deregister(&cdc_driver); |
| } |
| module_exit(cdc_exit); |
| |
| MODULE_AUTHOR("David Brownell"); |
| MODULE_DESCRIPTION("USB CDC Ethernet devices"); |
| MODULE_LICENSE("GPL"); |