| /* linux/arch/arm/mach-exynos4/time.c |
| * |
| * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * EXYNOS4 (and compatible) HRT support |
| * PWM 2/4 is used for this feature |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/clockchips.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/smp_twd.h> |
| |
| #include <mach/map.h> |
| #include <plat/regs-timer.h> |
| #include <asm/mach/time.h> |
| |
| static unsigned long clock_count_per_tick; |
| |
| static struct clk *tin2; |
| static struct clk *tin4; |
| static struct clk *tdiv2; |
| static struct clk *tdiv4; |
| static struct clk *timerclk; |
| |
| static void exynos4_pwm_stop(unsigned int pwm_id) |
| { |
| unsigned long tcon; |
| |
| tcon = __raw_readl(S3C2410_TCON); |
| |
| switch (pwm_id) { |
| case 2: |
| tcon &= ~S3C2410_TCON_T2START; |
| break; |
| case 4: |
| tcon &= ~S3C2410_TCON_T4START; |
| break; |
| default: |
| break; |
| } |
| __raw_writel(tcon, S3C2410_TCON); |
| } |
| |
| static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt) |
| { |
| unsigned long tcon; |
| |
| tcon = __raw_readl(S3C2410_TCON); |
| |
| /* timers reload after counting zero, so reduce the count by 1 */ |
| tcnt--; |
| |
| /* ensure timer is stopped... */ |
| switch (pwm_id) { |
| case 2: |
| tcon &= ~(0xf<<12); |
| tcon |= S3C2410_TCON_T2MANUALUPD; |
| |
| __raw_writel(tcnt, S3C2410_TCNTB(2)); |
| __raw_writel(tcnt, S3C2410_TCMPB(2)); |
| __raw_writel(tcon, S3C2410_TCON); |
| |
| break; |
| case 4: |
| tcon &= ~(7<<20); |
| tcon |= S3C2410_TCON_T4MANUALUPD; |
| |
| __raw_writel(tcnt, S3C2410_TCNTB(4)); |
| __raw_writel(tcnt, S3C2410_TCMPB(4)); |
| __raw_writel(tcon, S3C2410_TCON); |
| |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic) |
| { |
| unsigned long tcon; |
| |
| tcon = __raw_readl(S3C2410_TCON); |
| |
| switch (pwm_id) { |
| case 2: |
| tcon |= S3C2410_TCON_T2START; |
| tcon &= ~S3C2410_TCON_T2MANUALUPD; |
| |
| if (periodic) |
| tcon |= S3C2410_TCON_T2RELOAD; |
| else |
| tcon &= ~S3C2410_TCON_T2RELOAD; |
| break; |
| case 4: |
| tcon |= S3C2410_TCON_T4START; |
| tcon &= ~S3C2410_TCON_T4MANUALUPD; |
| |
| if (periodic) |
| tcon |= S3C2410_TCON_T4RELOAD; |
| else |
| tcon &= ~S3C2410_TCON_T4RELOAD; |
| break; |
| default: |
| break; |
| } |
| __raw_writel(tcon, S3C2410_TCON); |
| } |
| |
| static int exynos4_pwm_set_next_event(unsigned long cycles, |
| struct clock_event_device *evt) |
| { |
| exynos4_pwm_init(2, cycles); |
| exynos4_pwm_start(2, 0); |
| return 0; |
| } |
| |
| static void exynos4_pwm_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| exynos4_pwm_stop(2); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| exynos4_pwm_init(2, clock_count_per_tick); |
| exynos4_pwm_start(2, 1); |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| break; |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_RESUME: |
| break; |
| } |
| } |
| |
| static struct clock_event_device pwm_event_device = { |
| .name = "pwm_timer2", |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .rating = 200, |
| .shift = 32, |
| .set_next_event = exynos4_pwm_set_next_event, |
| .set_mode = exynos4_pwm_set_mode, |
| }; |
| |
| irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = &pwm_event_device; |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction exynos4_clock_event_irq = { |
| .name = "pwm_timer2_irq", |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = exynos4_clock_event_isr, |
| }; |
| |
| static void __init exynos4_clockevent_init(void) |
| { |
| unsigned long pclk; |
| unsigned long clock_rate; |
| struct clk *tscaler; |
| |
| pclk = clk_get_rate(timerclk); |
| |
| /* configure clock tick */ |
| |
| tscaler = clk_get_parent(tdiv2); |
| |
| clk_set_rate(tscaler, pclk / 2); |
| clk_set_rate(tdiv2, pclk / 2); |
| clk_set_parent(tin2, tdiv2); |
| |
| clock_rate = clk_get_rate(tin2); |
| |
| clock_count_per_tick = clock_rate / HZ; |
| |
| pwm_event_device.mult = |
| div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift); |
| pwm_event_device.max_delta_ns = |
| clockevent_delta2ns(-1, &pwm_event_device); |
| pwm_event_device.min_delta_ns = |
| clockevent_delta2ns(1, &pwm_event_device); |
| |
| pwm_event_device.cpumask = cpumask_of(0); |
| clockevents_register_device(&pwm_event_device); |
| |
| setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq); |
| } |
| |
| static cycle_t exynos4_pwm4_read(struct clocksource *cs) |
| { |
| return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); |
| } |
| |
| #ifdef CONFIG_PM |
| static void exynos4_pwm4_resume(struct clocksource *cs) |
| { |
| unsigned long pclk; |
| |
| pclk = clk_get_rate(timerclk); |
| |
| clk_set_rate(tdiv4, pclk / 2); |
| clk_set_parent(tin4, tdiv4); |
| |
| exynos4_pwm_init(4, ~0); |
| exynos4_pwm_start(4, 1); |
| } |
| #endif |
| |
| struct clocksource pwm_clocksource = { |
| .name = "pwm_timer4", |
| .rating = 250, |
| .read = exynos4_pwm4_read, |
| .mask = CLOCKSOURCE_MASK(32), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS , |
| #ifdef CONFIG_PM |
| .resume = exynos4_pwm4_resume, |
| #endif |
| }; |
| |
| static void __init exynos4_clocksource_init(void) |
| { |
| unsigned long pclk; |
| unsigned long clock_rate; |
| |
| pclk = clk_get_rate(timerclk); |
| |
| clk_set_rate(tdiv4, pclk / 2); |
| clk_set_parent(tin4, tdiv4); |
| |
| clock_rate = clk_get_rate(tin4); |
| |
| exynos4_pwm_init(4, ~0); |
| exynos4_pwm_start(4, 1); |
| |
| if (clocksource_register_hz(&pwm_clocksource, clock_rate)) |
| panic("%s: can't register clocksource\n", pwm_clocksource.name); |
| } |
| |
| static void __init exynos4_timer_resources(void) |
| { |
| struct platform_device tmpdev; |
| |
| tmpdev.dev.bus = &platform_bus_type; |
| |
| timerclk = clk_get(NULL, "timers"); |
| if (IS_ERR(timerclk)) |
| panic("failed to get timers clock for system timer"); |
| |
| clk_enable(timerclk); |
| |
| tmpdev.id = 2; |
| tin2 = clk_get(&tmpdev.dev, "pwm-tin"); |
| if (IS_ERR(tin2)) |
| panic("failed to get pwm-tin2 clock for system timer"); |
| |
| tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv"); |
| if (IS_ERR(tdiv2)) |
| panic("failed to get pwm-tdiv2 clock for system timer"); |
| clk_enable(tin2); |
| |
| tmpdev.id = 4; |
| tin4 = clk_get(&tmpdev.dev, "pwm-tin"); |
| if (IS_ERR(tin4)) |
| panic("failed to get pwm-tin4 clock for system timer"); |
| |
| tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv"); |
| if (IS_ERR(tdiv4)) |
| panic("failed to get pwm-tdiv4 clock for system timer"); |
| |
| clk_enable(tin4); |
| } |
| |
| static void __init exynos4_timer_init(void) |
| { |
| #ifdef CONFIG_LOCAL_TIMERS |
| twd_base = S5P_VA_TWD; |
| #endif |
| |
| exynos4_timer_resources(); |
| exynos4_clockevent_init(); |
| exynos4_clocksource_init(); |
| } |
| |
| struct sys_timer exynos4_timer = { |
| .init = exynos4_timer_init, |
| }; |