| /* |
| * S390 version |
| * Copyright IBM Corp. 1999, 2000 |
| * Author(s): Hartmut Penner (hp@de.ibm.com), |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) |
| * |
| * Derived from "include/asm-i386/uaccess.h" |
| */ |
| #ifndef __S390_UACCESS_H |
| #define __S390_UACCESS_H |
| |
| /* |
| * User space memory access functions |
| */ |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <asm/ctl_reg.h> |
| |
| #define VERIFY_READ 0 |
| #define VERIFY_WRITE 1 |
| |
| |
| /* |
| * The fs value determines whether argument validity checking should be |
| * performed or not. If get_fs() == USER_DS, checking is performed, with |
| * get_fs() == KERNEL_DS, checking is bypassed. |
| * |
| * For historical reasons, these macros are grossly misnamed. |
| */ |
| |
| #define MAKE_MM_SEG(a) ((mm_segment_t) { (a) }) |
| |
| |
| #define KERNEL_DS MAKE_MM_SEG(0) |
| #define USER_DS MAKE_MM_SEG(1) |
| |
| #define get_ds() (KERNEL_DS) |
| #define get_fs() (current->thread.mm_segment) |
| |
| #define set_fs(x) \ |
| ({ \ |
| unsigned long __pto; \ |
| current->thread.mm_segment = (x); \ |
| __pto = current->thread.mm_segment.ar4 ? \ |
| S390_lowcore.user_asce : S390_lowcore.kernel_asce; \ |
| __ctl_load(__pto, 7, 7); \ |
| }) |
| |
| #define segment_eq(a,b) ((a).ar4 == (b).ar4) |
| |
| static inline int __range_ok(unsigned long addr, unsigned long size) |
| { |
| return 1; |
| } |
| |
| #define __access_ok(addr, size) \ |
| ({ \ |
| __chk_user_ptr(addr); \ |
| __range_ok((unsigned long)(addr), (size)); \ |
| }) |
| |
| #define access_ok(type, addr, size) __access_ok(addr, size) |
| |
| /* |
| * The exception table consists of pairs of addresses: the first is the |
| * address of an instruction that is allowed to fault, and the second is |
| * the address at which the program should continue. No registers are |
| * modified, so it is entirely up to the continuation code to figure out |
| * what to do. |
| * |
| * All the routines below use bits of fixup code that are out of line |
| * with the main instruction path. This means when everything is well, |
| * we don't even have to jump over them. Further, they do not intrude |
| * on our cache or tlb entries. |
| */ |
| |
| struct exception_table_entry |
| { |
| int insn, fixup; |
| }; |
| |
| static inline unsigned long extable_fixup(const struct exception_table_entry *x) |
| { |
| return (unsigned long)&x->fixup + x->fixup; |
| } |
| |
| #define ARCH_HAS_RELATIVE_EXTABLE |
| |
| /** |
| * __copy_from_user: - Copy a block of data from user space, with less checking. |
| * @to: Destination address, in kernel space. |
| * @from: Source address, in user space. |
| * @n: Number of bytes to copy. |
| * |
| * Context: User context only. This function may sleep if pagefaults are |
| * enabled. |
| * |
| * Copy data from user space to kernel space. Caller must check |
| * the specified block with access_ok() before calling this function. |
| * |
| * Returns number of bytes that could not be copied. |
| * On success, this will be zero. |
| * |
| * If some data could not be copied, this function will pad the copied |
| * data to the requested size using zero bytes. |
| */ |
| unsigned long __must_check __copy_from_user(void *to, const void __user *from, |
| unsigned long n); |
| |
| /** |
| * __copy_to_user: - Copy a block of data into user space, with less checking. |
| * @to: Destination address, in user space. |
| * @from: Source address, in kernel space. |
| * @n: Number of bytes to copy. |
| * |
| * Context: User context only. This function may sleep if pagefaults are |
| * enabled. |
| * |
| * Copy data from kernel space to user space. Caller must check |
| * the specified block with access_ok() before calling this function. |
| * |
| * Returns number of bytes that could not be copied. |
| * On success, this will be zero. |
| */ |
| unsigned long __must_check __copy_to_user(void __user *to, const void *from, |
| unsigned long n); |
| |
| #define __copy_to_user_inatomic __copy_to_user |
| #define __copy_from_user_inatomic __copy_from_user |
| |
| #ifdef CONFIG_HAVE_MARCH_Z10_FEATURES |
| |
| #define __put_get_user_asm(to, from, size, spec) \ |
| ({ \ |
| register unsigned long __reg0 asm("0") = spec; \ |
| int __rc; \ |
| \ |
| asm volatile( \ |
| "0: mvcos %1,%3,%2\n" \ |
| "1: xr %0,%0\n" \ |
| "2:\n" \ |
| ".pushsection .fixup, \"ax\"\n" \ |
| "3: lhi %0,%5\n" \ |
| " jg 2b\n" \ |
| ".popsection\n" \ |
| EX_TABLE(0b,3b) EX_TABLE(1b,3b) \ |
| : "=d" (__rc), "=Q" (*(to)) \ |
| : "d" (size), "Q" (*(from)), \ |
| "d" (__reg0), "K" (-EFAULT) \ |
| : "cc"); \ |
| __rc; \ |
| }) |
| |
| static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size) |
| { |
| unsigned long spec = 0x810000UL; |
| int rc; |
| |
| switch (size) { |
| case 1: |
| rc = __put_get_user_asm((unsigned char __user *)ptr, |
| (unsigned char *)x, |
| size, spec); |
| break; |
| case 2: |
| rc = __put_get_user_asm((unsigned short __user *)ptr, |
| (unsigned short *)x, |
| size, spec); |
| break; |
| case 4: |
| rc = __put_get_user_asm((unsigned int __user *)ptr, |
| (unsigned int *)x, |
| size, spec); |
| break; |
| case 8: |
| rc = __put_get_user_asm((unsigned long __user *)ptr, |
| (unsigned long *)x, |
| size, spec); |
| break; |
| }; |
| return rc; |
| } |
| |
| static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size) |
| { |
| unsigned long spec = 0x81UL; |
| int rc; |
| |
| switch (size) { |
| case 1: |
| rc = __put_get_user_asm((unsigned char *)x, |
| (unsigned char __user *)ptr, |
| size, spec); |
| break; |
| case 2: |
| rc = __put_get_user_asm((unsigned short *)x, |
| (unsigned short __user *)ptr, |
| size, spec); |
| break; |
| case 4: |
| rc = __put_get_user_asm((unsigned int *)x, |
| (unsigned int __user *)ptr, |
| size, spec); |
| break; |
| case 8: |
| rc = __put_get_user_asm((unsigned long *)x, |
| (unsigned long __user *)ptr, |
| size, spec); |
| break; |
| }; |
| return rc; |
| } |
| |
| #else /* CONFIG_HAVE_MARCH_Z10_FEATURES */ |
| |
| static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size) |
| { |
| size = __copy_to_user(ptr, x, size); |
| return size ? -EFAULT : 0; |
| } |
| |
| static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size) |
| { |
| size = __copy_from_user(x, ptr, size); |
| return size ? -EFAULT : 0; |
| } |
| |
| #endif /* CONFIG_HAVE_MARCH_Z10_FEATURES */ |
| |
| /* |
| * These are the main single-value transfer routines. They automatically |
| * use the right size if we just have the right pointer type. |
| */ |
| #define __put_user(x, ptr) \ |
| ({ \ |
| __typeof__(*(ptr)) __x = (x); \ |
| int __pu_err = -EFAULT; \ |
| __chk_user_ptr(ptr); \ |
| switch (sizeof (*(ptr))) { \ |
| case 1: \ |
| case 2: \ |
| case 4: \ |
| case 8: \ |
| __pu_err = __put_user_fn(&__x, ptr, \ |
| sizeof(*(ptr))); \ |
| break; \ |
| default: \ |
| __put_user_bad(); \ |
| break; \ |
| } \ |
| __builtin_expect(__pu_err, 0); \ |
| }) |
| |
| #define put_user(x, ptr) \ |
| ({ \ |
| might_fault(); \ |
| __put_user(x, ptr); \ |
| }) |
| |
| |
| int __put_user_bad(void) __attribute__((noreturn)); |
| |
| #define __get_user(x, ptr) \ |
| ({ \ |
| int __gu_err = -EFAULT; \ |
| __chk_user_ptr(ptr); \ |
| switch (sizeof(*(ptr))) { \ |
| case 1: { \ |
| unsigned char __x = 0; \ |
| __gu_err = __get_user_fn(&__x, ptr, \ |
| sizeof(*(ptr))); \ |
| (x) = *(__force __typeof__(*(ptr)) *) &__x; \ |
| break; \ |
| }; \ |
| case 2: { \ |
| unsigned short __x = 0; \ |
| __gu_err = __get_user_fn(&__x, ptr, \ |
| sizeof(*(ptr))); \ |
| (x) = *(__force __typeof__(*(ptr)) *) &__x; \ |
| break; \ |
| }; \ |
| case 4: { \ |
| unsigned int __x = 0; \ |
| __gu_err = __get_user_fn(&__x, ptr, \ |
| sizeof(*(ptr))); \ |
| (x) = *(__force __typeof__(*(ptr)) *) &__x; \ |
| break; \ |
| }; \ |
| case 8: { \ |
| unsigned long long __x = 0; \ |
| __gu_err = __get_user_fn(&__x, ptr, \ |
| sizeof(*(ptr))); \ |
| (x) = *(__force __typeof__(*(ptr)) *) &__x; \ |
| break; \ |
| }; \ |
| default: \ |
| __get_user_bad(); \ |
| break; \ |
| } \ |
| __builtin_expect(__gu_err, 0); \ |
| }) |
| |
| #define get_user(x, ptr) \ |
| ({ \ |
| might_fault(); \ |
| __get_user(x, ptr); \ |
| }) |
| |
| int __get_user_bad(void) __attribute__((noreturn)); |
| |
| #define __put_user_unaligned __put_user |
| #define __get_user_unaligned __get_user |
| |
| extern void __compiletime_error("usercopy buffer size is too small") |
| __bad_copy_user(void); |
| |
| static inline void copy_user_overflow(int size, unsigned long count) |
| { |
| WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count); |
| } |
| |
| /** |
| * copy_to_user: - Copy a block of data into user space. |
| * @to: Destination address, in user space. |
| * @from: Source address, in kernel space. |
| * @n: Number of bytes to copy. |
| * |
| * Context: User context only. This function may sleep if pagefaults are |
| * enabled. |
| * |
| * Copy data from kernel space to user space. |
| * |
| * Returns number of bytes that could not be copied. |
| * On success, this will be zero. |
| */ |
| static inline unsigned long __must_check |
| copy_to_user(void __user *to, const void *from, unsigned long n) |
| { |
| might_fault(); |
| return __copy_to_user(to, from, n); |
| } |
| |
| /** |
| * copy_from_user: - Copy a block of data from user space. |
| * @to: Destination address, in kernel space. |
| * @from: Source address, in user space. |
| * @n: Number of bytes to copy. |
| * |
| * Context: User context only. This function may sleep if pagefaults are |
| * enabled. |
| * |
| * Copy data from user space to kernel space. |
| * |
| * Returns number of bytes that could not be copied. |
| * On success, this will be zero. |
| * |
| * If some data could not be copied, this function will pad the copied |
| * data to the requested size using zero bytes. |
| */ |
| static inline unsigned long __must_check |
| copy_from_user(void *to, const void __user *from, unsigned long n) |
| { |
| unsigned int sz = __compiletime_object_size(to); |
| |
| might_fault(); |
| if (unlikely(sz != -1 && sz < n)) { |
| if (!__builtin_constant_p(n)) |
| copy_user_overflow(sz, n); |
| else |
| __bad_copy_user(); |
| return n; |
| } |
| return __copy_from_user(to, from, n); |
| } |
| |
| unsigned long __must_check |
| __copy_in_user(void __user *to, const void __user *from, unsigned long n); |
| |
| static inline unsigned long __must_check |
| copy_in_user(void __user *to, const void __user *from, unsigned long n) |
| { |
| might_fault(); |
| return __copy_in_user(to, from, n); |
| } |
| |
| /* |
| * Copy a null terminated string from userspace. |
| */ |
| |
| long __strncpy_from_user(char *dst, const char __user *src, long count); |
| |
| static inline long __must_check |
| strncpy_from_user(char *dst, const char __user *src, long count) |
| { |
| might_fault(); |
| return __strncpy_from_user(dst, src, count); |
| } |
| |
| unsigned long __must_check __strnlen_user(const char __user *src, unsigned long count); |
| |
| static inline unsigned long strnlen_user(const char __user *src, unsigned long n) |
| { |
| might_fault(); |
| return __strnlen_user(src, n); |
| } |
| |
| /** |
| * strlen_user: - Get the size of a string in user space. |
| * @str: The string to measure. |
| * |
| * Context: User context only. This function may sleep if pagefaults are |
| * enabled. |
| * |
| * Get the size of a NUL-terminated string in user space. |
| * |
| * Returns the size of the string INCLUDING the terminating NUL. |
| * On exception, returns 0. |
| * |
| * If there is a limit on the length of a valid string, you may wish to |
| * consider using strnlen_user() instead. |
| */ |
| #define strlen_user(str) strnlen_user(str, ~0UL) |
| |
| /* |
| * Zero Userspace |
| */ |
| unsigned long __must_check __clear_user(void __user *to, unsigned long size); |
| |
| static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) |
| { |
| might_fault(); |
| return __clear_user(to, n); |
| } |
| |
| int copy_to_user_real(void __user *dest, void *src, unsigned long count); |
| void s390_kernel_write(void *dst, const void *src, size_t size); |
| |
| #endif /* __S390_UACCESS_H */ |