| /* |
| * neo1973_gta02_wm8753.c -- SoC audio for Openmoko Freerunner(GTA02) |
| * |
| * Copyright 2007 Openmoko Inc |
| * Author: Graeme Gregory <graeme@openmoko.org> |
| * Copyright 2007 Wolfson Microelectronics PLC. |
| * Author: Graeme Gregory <linux@wolfsonmicro.com> |
| * Copyright 2009 Wolfson Microelectronics |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/gpio.h> |
| |
| #include <sound/soc.h> |
| |
| #include <asm/mach-types.h> |
| #include <plat/regs-iis.h> |
| #include <mach/gta02.h> |
| |
| #include "../codecs/wm8753.h" |
| #include "s3c24xx-i2s.h" |
| |
| static struct snd_soc_card neo1973_gta02; |
| |
| static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| struct snd_soc_dai *cpu_dai = rtd->cpu_dai; |
| unsigned int pll_out = 0, bclk = 0; |
| int ret = 0; |
| unsigned long iis_clkrate; |
| |
| iis_clkrate = s3c24xx_i2s_get_clockrate(); |
| |
| switch (params_rate(params)) { |
| case 8000: |
| case 16000: |
| pll_out = 12288000; |
| break; |
| case 48000: |
| bclk = WM8753_BCLK_DIV_4; |
| pll_out = 12288000; |
| break; |
| case 96000: |
| bclk = WM8753_BCLK_DIV_2; |
| pll_out = 12288000; |
| break; |
| case 11025: |
| bclk = WM8753_BCLK_DIV_16; |
| pll_out = 11289600; |
| break; |
| case 22050: |
| bclk = WM8753_BCLK_DIV_8; |
| pll_out = 11289600; |
| break; |
| case 44100: |
| bclk = WM8753_BCLK_DIV_4; |
| pll_out = 11289600; |
| break; |
| case 88200: |
| bclk = WM8753_BCLK_DIV_2; |
| pll_out = 11289600; |
| break; |
| } |
| |
| /* set codec DAI configuration */ |
| ret = snd_soc_dai_set_fmt(codec_dai, |
| SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBM_CFM); |
| if (ret < 0) |
| return ret; |
| |
| /* set cpu DAI configuration */ |
| ret = snd_soc_dai_set_fmt(cpu_dai, |
| SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBM_CFM); |
| if (ret < 0) |
| return ret; |
| |
| /* set the codec system clock for DAC and ADC */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out, |
| SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| /* set MCLK division for sample rate */ |
| ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, |
| S3C2410_IISMOD_32FS); |
| if (ret < 0) |
| return ret; |
| |
| /* set codec BCLK division for sample rate */ |
| ret = snd_soc_dai_set_clkdiv(codec_dai, |
| WM8753_BCLKDIV, bclk); |
| if (ret < 0) |
| return ret; |
| |
| /* set prescaler division for sample rate */ |
| ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, |
| S3C24XX_PRESCALE(4, 4)); |
| if (ret < 0) |
| return ret; |
| |
| /* codec PLL input is PCLK/4 */ |
| ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, |
| iis_clkrate / 4, pll_out); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| |
| /* disable the PLL */ |
| return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0); |
| } |
| |
| /* |
| * Neo1973 WM8753 HiFi DAI opserations. |
| */ |
| static struct snd_soc_ops neo1973_gta02_hifi_ops = { |
| .hw_params = neo1973_gta02_hifi_hw_params, |
| .hw_free = neo1973_gta02_hifi_hw_free, |
| }; |
| |
| static int neo1973_gta02_voice_hw_params( |
| struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| unsigned int pcmdiv = 0; |
| int ret = 0; |
| unsigned long iis_clkrate; |
| |
| iis_clkrate = s3c24xx_i2s_get_clockrate(); |
| |
| if (params_rate(params) != 8000) |
| return -EINVAL; |
| if (params_channels(params) != 1) |
| return -EINVAL; |
| |
| pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */ |
| |
| /* todo: gg check mode (DSP_B) against CSR datasheet */ |
| /* set codec DAI configuration */ |
| ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | |
| SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); |
| if (ret < 0) |
| return ret; |
| |
| /* set the codec system clock for DAC and ADC */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, |
| 12288000, SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| /* set codec PCM division for sample rate */ |
| ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, |
| pcmdiv); |
| if (ret < 0) |
| return ret; |
| |
| /* configure and enable PLL for 12.288MHz output */ |
| ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, |
| iis_clkrate / 4, 12288000); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| |
| /* disable the PLL */ |
| return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0); |
| } |
| |
| static struct snd_soc_ops neo1973_gta02_voice_ops = { |
| .hw_params = neo1973_gta02_voice_hw_params, |
| .hw_free = neo1973_gta02_voice_hw_free, |
| }; |
| |
| #define LM4853_AMP 1 |
| #define LM4853_SPK 2 |
| |
| static u8 lm4853_state; |
| |
| /* This has no effect, it exists only to maintain compatibility with |
| * existing ALSA state files. |
| */ |
| static int lm4853_set_state(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int val = ucontrol->value.integer.value[0]; |
| |
| if (val) |
| lm4853_state |= LM4853_AMP; |
| else |
| lm4853_state &= ~LM4853_AMP; |
| |
| return 0; |
| } |
| |
| static int lm4853_get_state(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP; |
| |
| return 0; |
| } |
| |
| static int lm4853_set_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int val = ucontrol->value.integer.value[0]; |
| |
| if (val) { |
| lm4853_state |= LM4853_SPK; |
| gpio_set_value(GTA02_GPIO_HP_IN, 0); |
| } else { |
| lm4853_state &= ~LM4853_SPK; |
| gpio_set_value(GTA02_GPIO_HP_IN, 1); |
| } |
| |
| return 0; |
| } |
| |
| static int lm4853_get_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1; |
| |
| return 0; |
| } |
| |
| static int lm4853_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, |
| int event) |
| { |
| gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event)); |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = { |
| SND_SOC_DAPM_SPK("Stereo Out", lm4853_event), |
| SND_SOC_DAPM_LINE("GSM Line Out", NULL), |
| SND_SOC_DAPM_LINE("GSM Line In", NULL), |
| SND_SOC_DAPM_MIC("Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("Handset Mic", NULL), |
| SND_SOC_DAPM_SPK("Handset Spk", NULL), |
| }; |
| |
| |
| /* example machine audio_mapnections */ |
| static const struct snd_soc_dapm_route audio_map[] = { |
| |
| /* Connections to the lm4853 amp */ |
| {"Stereo Out", NULL, "LOUT1"}, |
| {"Stereo Out", NULL, "ROUT1"}, |
| |
| /* Connections to the GSM Module */ |
| {"GSM Line Out", NULL, "MONO1"}, |
| {"GSM Line Out", NULL, "MONO2"}, |
| {"RXP", NULL, "GSM Line In"}, |
| {"RXN", NULL, "GSM Line In"}, |
| |
| /* Connections to Headset */ |
| {"MIC1", NULL, "Mic Bias"}, |
| {"Mic Bias", NULL, "Headset Mic"}, |
| |
| /* Call Mic */ |
| {"MIC2", NULL, "Mic Bias"}, |
| {"MIC2N", NULL, "Mic Bias"}, |
| {"Mic Bias", NULL, "Handset Mic"}, |
| |
| /* Call Speaker */ |
| {"Handset Spk", NULL, "LOUT2"}, |
| {"Handset Spk", NULL, "ROUT2"}, |
| |
| /* Connect the ALC pins */ |
| {"ACIN", NULL, "ACOP"}, |
| }; |
| |
| static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = { |
| SOC_DAPM_PIN_SWITCH("Stereo Out"), |
| SOC_DAPM_PIN_SWITCH("GSM Line Out"), |
| SOC_DAPM_PIN_SWITCH("GSM Line In"), |
| SOC_DAPM_PIN_SWITCH("Headset Mic"), |
| SOC_DAPM_PIN_SWITCH("Handset Mic"), |
| SOC_DAPM_PIN_SWITCH("Handset Spk"), |
| |
| /* This has no effect, it exists only to maintain compatibility with |
| * existing ALSA state files. |
| */ |
| SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0, |
| lm4853_get_state, |
| lm4853_set_state), |
| SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0, |
| lm4853_get_spk, |
| lm4853_set_spk), |
| }; |
| |
| /* |
| * This is an example machine initialisation for a wm8753 connected to a |
| * neo1973 GTA02. |
| */ |
| static int neo1973_gta02_wm8753_init(struct snd_soc_pcm_runtime *rtd) |
| { |
| struct snd_soc_codec *codec = rtd->codec; |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| int err; |
| |
| /* set up NC codec pins */ |
| snd_soc_dapm_nc_pin(dapm, "OUT3"); |
| snd_soc_dapm_nc_pin(dapm, "OUT4"); |
| snd_soc_dapm_nc_pin(dapm, "LINE1"); |
| snd_soc_dapm_nc_pin(dapm, "LINE2"); |
| |
| /* Add neo1973 gta02 specific widgets */ |
| snd_soc_dapm_new_controls(dapm, wm8753_dapm_widgets, |
| ARRAY_SIZE(wm8753_dapm_widgets)); |
| |
| /* add neo1973 gta02 specific controls */ |
| err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls, |
| ARRAY_SIZE(wm8753_neo1973_gta02_controls)); |
| |
| if (err < 0) |
| return err; |
| |
| /* set up neo1973 gta02 specific audio path audio_map */ |
| snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); |
| |
| /* set endpoints to default off mode */ |
| snd_soc_dapm_disable_pin(dapm, "Stereo Out"); |
| snd_soc_dapm_disable_pin(dapm, "GSM Line Out"); |
| snd_soc_dapm_disable_pin(dapm, "GSM Line In"); |
| snd_soc_dapm_disable_pin(dapm, "Headset Mic"); |
| snd_soc_dapm_disable_pin(dapm, "Handset Mic"); |
| snd_soc_dapm_disable_pin(dapm, "Handset Spk"); |
| |
| /* allow audio paths from the GSM modem to run during suspend */ |
| snd_soc_dapm_ignore_suspend(dapm, "Stereo Out"); |
| snd_soc_dapm_ignore_suspend(dapm, "GSM Line Out"); |
| snd_soc_dapm_ignore_suspend(dapm, "GSM Line In"); |
| snd_soc_dapm_ignore_suspend(dapm, "Headset Mic"); |
| snd_soc_dapm_ignore_suspend(dapm, "Handset Mic"); |
| snd_soc_dapm_ignore_suspend(dapm, "Handset Spk"); |
| |
| snd_soc_dapm_sync(dapm); |
| |
| return 0; |
| } |
| |
| /* |
| * BT Codec DAI |
| */ |
| static struct snd_soc_dai_driver bt_dai = { |
| .name = "bluetooth-dai", |
| .playback = { |
| .channels_min = 1, |
| .channels_max = 1, |
| .rates = SNDRV_PCM_RATE_8000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE,}, |
| .capture = { |
| .channels_min = 1, |
| .channels_max = 1, |
| .rates = SNDRV_PCM_RATE_8000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE,}, |
| }; |
| |
| static struct snd_soc_dai_link neo1973_gta02_dai[] = { |
| { /* Hifi Playback - for similatious use with voice below */ |
| .name = "WM8753", |
| .stream_name = "WM8753 HiFi", |
| .cpu_dai_name = "s3c24xx-i2s", |
| .codec_dai_name = "wm8753-hifi", |
| .init = neo1973_gta02_wm8753_init, |
| .platform_name = "samsung-audio", |
| .codec_name = "wm8753-codec.0-0x1a", |
| .ops = &neo1973_gta02_hifi_ops, |
| }, |
| { /* Voice via BT */ |
| .name = "Bluetooth", |
| .stream_name = "Voice", |
| .cpu_dai_name = "bluetooth-dai", |
| .codec_dai_name = "wm8753-voice", |
| .ops = &neo1973_gta02_voice_ops, |
| .codec_name = "wm8753-codec.0-0x1a", |
| .platform_name = "samsung-audio", |
| }, |
| }; |
| |
| static struct snd_soc_card neo1973_gta02 = { |
| .name = "neo1973-gta02", |
| .dai_link = neo1973_gta02_dai, |
| .num_links = ARRAY_SIZE(neo1973_gta02_dai), |
| }; |
| |
| static struct platform_device *neo1973_gta02_snd_device; |
| |
| static int __init neo1973_gta02_init(void) |
| { |
| int ret; |
| |
| if (!machine_is_neo1973_gta02()) { |
| printk(KERN_INFO |
| "Only GTA02 is supported by this ASoC driver\n"); |
| return -ENODEV; |
| } |
| |
| neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1); |
| if (!neo1973_gta02_snd_device) |
| return -ENOMEM; |
| |
| /* register bluetooth DAI here */ |
| ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, &bt_dai); |
| if (ret) |
| goto err_put_device; |
| |
| platform_set_drvdata(neo1973_gta02_snd_device, &neo1973_gta02); |
| ret = platform_device_add(neo1973_gta02_snd_device); |
| |
| if (ret) |
| goto err_unregister_dai; |
| |
| /* Initialise GPIOs used by amp */ |
| ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN"); |
| if (ret) { |
| pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN); |
| goto err_del_device; |
| } |
| |
| ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1); |
| if (ret) { |
| pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN); |
| goto err_free_gpio_hp_in; |
| } |
| |
| ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT"); |
| if (ret) { |
| pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT); |
| goto err_free_gpio_hp_in; |
| } |
| |
| ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1); |
| if (ret) { |
| pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT); |
| goto err_free_gpio_amp_shut; |
| } |
| |
| return 0; |
| |
| err_free_gpio_amp_shut: |
| gpio_free(GTA02_GPIO_AMP_SHUT); |
| err_free_gpio_hp_in: |
| gpio_free(GTA02_GPIO_HP_IN); |
| err_del_device: |
| platform_device_del(neo1973_gta02_snd_device); |
| err_unregister_dai: |
| snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev); |
| err_put_device: |
| platform_device_put(neo1973_gta02_snd_device); |
| return ret; |
| } |
| module_init(neo1973_gta02_init); |
| |
| static void __exit neo1973_gta02_exit(void) |
| { |
| snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev); |
| platform_device_unregister(neo1973_gta02_snd_device); |
| gpio_free(GTA02_GPIO_HP_IN); |
| gpio_free(GTA02_GPIO_AMP_SHUT); |
| } |
| module_exit(neo1973_gta02_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org"); |
| MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02"); |
| MODULE_LICENSE("GPL"); |