| /* |
| * Copyright 2010-2011 Calxeda, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_address.h> |
| #include <linux/smp.h> |
| #include <linux/amba/bus.h> |
| |
| #include <asm/arch_timer.h> |
| #include <asm/cacheflush.h> |
| #include <asm/smp_plat.h> |
| #include <asm/smp_twd.h> |
| #include <asm/hardware/arm_timer.h> |
| #include <asm/hardware/timer-sp.h> |
| #include <asm/hardware/gic.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| |
| #include "core.h" |
| #include "sysregs.h" |
| |
| void __iomem *sregs_base; |
| void __iomem *scu_base_addr; |
| |
| static void __init highbank_scu_map_io(void) |
| { |
| unsigned long base; |
| |
| /* Get SCU base */ |
| asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); |
| |
| scu_base_addr = ioremap(base, SZ_4K); |
| } |
| |
| #define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu))) |
| #define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu)) |
| |
| void highbank_set_cpu_jump(int cpu, void *jump_addr) |
| { |
| cpu = cpu_logical_map(cpu); |
| writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu)); |
| __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); |
| outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), |
| HB_JUMP_TABLE_PHYS(cpu) + 15); |
| } |
| |
| const static struct of_device_id irq_match[] = { |
| { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, |
| { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, |
| {} |
| }; |
| |
| #ifdef CONFIG_CACHE_L2X0 |
| static void highbank_l2x0_disable(void) |
| { |
| /* Disable PL310 L2 Cache controller */ |
| highbank_smc1(0x102, 0x0); |
| } |
| #endif |
| |
| static void __init highbank_init_irq(void) |
| { |
| of_irq_init(irq_match); |
| |
| if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) |
| highbank_scu_map_io(); |
| |
| #ifdef CONFIG_CACHE_L2X0 |
| /* Enable PL310 L2 Cache controller */ |
| highbank_smc1(0x102, 0x1); |
| l2x0_of_init(0, ~0UL); |
| outer_cache.disable = highbank_l2x0_disable; |
| #endif |
| } |
| |
| static struct clk_lookup lookup = { |
| .dev_id = "sp804", |
| .con_id = NULL, |
| }; |
| |
| static void __init highbank_timer_init(void) |
| { |
| int irq; |
| struct device_node *np; |
| void __iomem *timer_base; |
| |
| /* Map system registers */ |
| np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); |
| sregs_base = of_iomap(np, 0); |
| WARN_ON(!sregs_base); |
| |
| np = of_find_compatible_node(NULL, NULL, "arm,sp804"); |
| timer_base = of_iomap(np, 0); |
| WARN_ON(!timer_base); |
| irq = irq_of_parse_and_map(np, 0); |
| |
| highbank_clocks_init(); |
| lookup.clk = of_clk_get(np, 0); |
| clkdev_add(&lookup); |
| |
| sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); |
| sp804_clockevents_init(timer_base, irq, "timer0"); |
| |
| twd_local_timer_of_register(); |
| |
| arch_timer_of_register(); |
| arch_timer_sched_clock_init(); |
| } |
| |
| static void highbank_power_off(void) |
| { |
| highbank_set_pwr_shutdown(); |
| |
| while (1) |
| cpu_do_idle(); |
| } |
| |
| static int highbank_platform_notifier(struct notifier_block *nb, |
| unsigned long event, void *__dev) |
| { |
| struct resource *res; |
| int reg = -1; |
| struct device *dev = __dev; |
| |
| if (event != BUS_NOTIFY_ADD_DEVICE) |
| return NOTIFY_DONE; |
| |
| if (of_device_is_compatible(dev->of_node, "calxeda,hb-ahci")) |
| reg = 0xc; |
| else if (of_device_is_compatible(dev->of_node, "calxeda,hb-sdhci")) |
| reg = 0x18; |
| else if (of_device_is_compatible(dev->of_node, "arm,pl330")) |
| reg = 0x20; |
| else if (of_device_is_compatible(dev->of_node, "calxeda,hb-xgmac")) { |
| res = platform_get_resource(to_platform_device(dev), |
| IORESOURCE_MEM, 0); |
| if (res) { |
| if (res->start == 0xfff50000) |
| reg = 0; |
| else if (res->start == 0xfff51000) |
| reg = 4; |
| } |
| } |
| |
| if (reg < 0) |
| return NOTIFY_DONE; |
| |
| if (of_property_read_bool(dev->of_node, "dma-coherent")) { |
| writel(0xff31, sregs_base + reg); |
| set_dma_ops(dev, &arm_coherent_dma_ops); |
| } else |
| writel(0, sregs_base + reg); |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block highbank_amba_nb = { |
| .notifier_call = highbank_platform_notifier, |
| }; |
| |
| static struct notifier_block highbank_platform_nb = { |
| .notifier_call = highbank_platform_notifier, |
| }; |
| |
| static void __init highbank_init(void) |
| { |
| pm_power_off = highbank_power_off; |
| highbank_pm_init(); |
| |
| bus_register_notifier(&platform_bus_type, &highbank_platform_nb); |
| bus_register_notifier(&amba_bustype, &highbank_amba_nb); |
| |
| of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); |
| } |
| |
| static const char *highbank_match[] __initconst = { |
| "calxeda,highbank", |
| "calxeda,ecx-2000", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(HIGHBANK, "Highbank") |
| .smp = smp_ops(highbank_smp_ops), |
| .map_io = debug_ll_io_init, |
| .init_irq = highbank_init_irq, |
| .init_time = highbank_timer_init, |
| .handle_irq = gic_handle_irq, |
| .init_machine = highbank_init, |
| .dt_compat = highbank_match, |
| .restart = highbank_restart, |
| MACHINE_END |