| /* Copyright 2008 - 2016 Freescale Semiconductor, Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __FSL_QMAN_H |
| #define __FSL_QMAN_H |
| |
| #include <linux/bitops.h> |
| |
| /* Hardware constants */ |
| #define QM_CHANNEL_SWPORTAL0 0 |
| #define QMAN_CHANNEL_POOL1 0x21 |
| #define QMAN_CHANNEL_POOL1_REV3 0x401 |
| extern u16 qm_channel_pool1; |
| |
| /* Portal processing (interrupt) sources */ |
| #define QM_PIRQ_CSCI 0x00100000 /* Congestion State Change */ |
| #define QM_PIRQ_EQCI 0x00080000 /* Enqueue Command Committed */ |
| #define QM_PIRQ_EQRI 0x00040000 /* EQCR Ring (below threshold) */ |
| #define QM_PIRQ_DQRI 0x00020000 /* DQRR Ring (non-empty) */ |
| #define QM_PIRQ_MRI 0x00010000 /* MR Ring (non-empty) */ |
| /* |
| * This mask contains all the interrupt sources that need handling except DQRI, |
| * ie. that if present should trigger slow-path processing. |
| */ |
| #define QM_PIRQ_SLOW (QM_PIRQ_CSCI | QM_PIRQ_EQCI | QM_PIRQ_EQRI | \ |
| QM_PIRQ_MRI) |
| |
| /* For qman_static_dequeue_*** APIs */ |
| #define QM_SDQCR_CHANNELS_POOL_MASK 0x00007fff |
| /* for n in [1,15] */ |
| #define QM_SDQCR_CHANNELS_POOL(n) (0x00008000 >> (n)) |
| /* for conversion from n of qm_channel */ |
| static inline u32 QM_SDQCR_CHANNELS_POOL_CONV(u16 channel) |
| { |
| return QM_SDQCR_CHANNELS_POOL(channel + 1 - qm_channel_pool1); |
| } |
| |
| /* --- QMan data structures (and associated constants) --- */ |
| |
| /* "Frame Descriptor (FD)" */ |
| struct qm_fd { |
| union { |
| struct { |
| u8 cfg8b_w1; |
| u8 bpid; /* Buffer Pool ID */ |
| u8 cfg8b_w3; |
| u8 addr_hi; /* high 8-bits of 40-bit address */ |
| __be32 addr_lo; /* low 32-bits of 40-bit address */ |
| } __packed; |
| __be64 data; |
| }; |
| __be32 cfg; /* format, offset, length / congestion */ |
| union { |
| __be32 cmd; |
| __be32 status; |
| }; |
| } __aligned(8); |
| |
| #define QM_FD_FORMAT_SG BIT(31) |
| #define QM_FD_FORMAT_LONG BIT(30) |
| #define QM_FD_FORMAT_COMPOUND BIT(29) |
| #define QM_FD_FORMAT_MASK GENMASK(31, 29) |
| #define QM_FD_OFF_SHIFT 20 |
| #define QM_FD_OFF_MASK GENMASK(28, 20) |
| #define QM_FD_LEN_MASK GENMASK(19, 0) |
| #define QM_FD_LEN_BIG_MASK GENMASK(28, 0) |
| |
| enum qm_fd_format { |
| /* |
| * 'contig' implies a contiguous buffer, whereas 'sg' implies a |
| * scatter-gather table. 'big' implies a 29-bit length with no offset |
| * field, otherwise length is 20-bit and offset is 9-bit. 'compound' |
| * implies a s/g-like table, where each entry itself represents a frame |
| * (contiguous or scatter-gather) and the 29-bit "length" is |
| * interpreted purely for congestion calculations, ie. a "congestion |
| * weight". |
| */ |
| qm_fd_contig = 0, |
| qm_fd_contig_big = QM_FD_FORMAT_LONG, |
| qm_fd_sg = QM_FD_FORMAT_SG, |
| qm_fd_sg_big = QM_FD_FORMAT_SG | QM_FD_FORMAT_LONG, |
| qm_fd_compound = QM_FD_FORMAT_COMPOUND |
| }; |
| |
| static inline dma_addr_t qm_fd_addr(const struct qm_fd *fd) |
| { |
| return be64_to_cpu(fd->data) & 0xffffffffffLLU; |
| } |
| |
| static inline u64 qm_fd_addr_get64(const struct qm_fd *fd) |
| { |
| return be64_to_cpu(fd->data) & 0xffffffffffLLU; |
| } |
| |
| static inline void qm_fd_addr_set64(struct qm_fd *fd, u64 addr) |
| { |
| fd->addr_hi = upper_32_bits(addr); |
| fd->addr_lo = cpu_to_be32(lower_32_bits(addr)); |
| } |
| |
| /* |
| * The 'format' field indicates the interpretation of the remaining |
| * 29 bits of the 32-bit word. |
| * If 'format' is _contig or _sg, 20b length and 9b offset. |
| * If 'format' is _contig_big or _sg_big, 29b length. |
| * If 'format' is _compound, 29b "congestion weight". |
| */ |
| static inline enum qm_fd_format qm_fd_get_format(const struct qm_fd *fd) |
| { |
| return be32_to_cpu(fd->cfg) & QM_FD_FORMAT_MASK; |
| } |
| |
| static inline int qm_fd_get_offset(const struct qm_fd *fd) |
| { |
| return (be32_to_cpu(fd->cfg) & QM_FD_OFF_MASK) >> QM_FD_OFF_SHIFT; |
| } |
| |
| static inline int qm_fd_get_length(const struct qm_fd *fd) |
| { |
| return be32_to_cpu(fd->cfg) & QM_FD_LEN_MASK; |
| } |
| |
| static inline int qm_fd_get_len_big(const struct qm_fd *fd) |
| { |
| return be32_to_cpu(fd->cfg) & QM_FD_LEN_BIG_MASK; |
| } |
| |
| static inline void qm_fd_set_param(struct qm_fd *fd, enum qm_fd_format fmt, |
| int off, int len) |
| { |
| fd->cfg = cpu_to_be32(fmt | (len & QM_FD_LEN_BIG_MASK) | |
| ((off << QM_FD_OFF_SHIFT) & QM_FD_OFF_MASK)); |
| } |
| |
| #define qm_fd_set_contig(fd, off, len) \ |
| qm_fd_set_param(fd, qm_fd_contig, off, len) |
| #define qm_fd_set_sg(fd, off, len) qm_fd_set_param(fd, qm_fd_sg, off, len) |
| #define qm_fd_set_contig_big(fd, len) \ |
| qm_fd_set_param(fd, qm_fd_contig_big, 0, len) |
| #define qm_fd_set_sg_big(fd, len) qm_fd_set_param(fd, qm_fd_sg_big, 0, len) |
| |
| static inline void qm_fd_clear_fd(struct qm_fd *fd) |
| { |
| fd->data = 0; |
| fd->cfg = 0; |
| fd->cmd = 0; |
| } |
| |
| /* Scatter/Gather table entry */ |
| struct qm_sg_entry { |
| union { |
| struct { |
| u8 __reserved1[3]; |
| u8 addr_hi; /* high 8-bits of 40-bit address */ |
| __be32 addr_lo; /* low 32-bits of 40-bit address */ |
| }; |
| __be64 data; |
| }; |
| __be32 cfg; /* E bit, F bit, length */ |
| u8 __reserved2; |
| u8 bpid; |
| __be16 offset; /* 13-bit, _res[13-15]*/ |
| } __packed; |
| |
| #define QM_SG_LEN_MASK GENMASK(29, 0) |
| #define QM_SG_OFF_MASK GENMASK(12, 0) |
| #define QM_SG_FIN BIT(30) |
| #define QM_SG_EXT BIT(31) |
| |
| static inline dma_addr_t qm_sg_addr(const struct qm_sg_entry *sg) |
| { |
| return be64_to_cpu(sg->data) & 0xffffffffffLLU; |
| } |
| |
| static inline u64 qm_sg_entry_get64(const struct qm_sg_entry *sg) |
| { |
| return be64_to_cpu(sg->data) & 0xffffffffffLLU; |
| } |
| |
| static inline void qm_sg_entry_set64(struct qm_sg_entry *sg, u64 addr) |
| { |
| sg->addr_hi = upper_32_bits(addr); |
| sg->addr_lo = cpu_to_be32(lower_32_bits(addr)); |
| } |
| |
| static inline bool qm_sg_entry_is_final(const struct qm_sg_entry *sg) |
| { |
| return be32_to_cpu(sg->cfg) & QM_SG_FIN; |
| } |
| |
| static inline bool qm_sg_entry_is_ext(const struct qm_sg_entry *sg) |
| { |
| return be32_to_cpu(sg->cfg) & QM_SG_EXT; |
| } |
| |
| static inline int qm_sg_entry_get_len(const struct qm_sg_entry *sg) |
| { |
| return be32_to_cpu(sg->cfg) & QM_SG_LEN_MASK; |
| } |
| |
| static inline void qm_sg_entry_set_len(struct qm_sg_entry *sg, int len) |
| { |
| sg->cfg = cpu_to_be32(len & QM_SG_LEN_MASK); |
| } |
| |
| static inline void qm_sg_entry_set_f(struct qm_sg_entry *sg, int len) |
| { |
| sg->cfg = cpu_to_be32(QM_SG_FIN | (len & QM_SG_LEN_MASK)); |
| } |
| |
| static inline int qm_sg_entry_get_off(const struct qm_sg_entry *sg) |
| { |
| return be32_to_cpu(sg->offset) & QM_SG_OFF_MASK; |
| } |
| |
| /* "Frame Dequeue Response" */ |
| struct qm_dqrr_entry { |
| u8 verb; |
| u8 stat; |
| __be16 seqnum; /* 15-bit */ |
| u8 tok; |
| u8 __reserved2[3]; |
| __be32 fqid; /* 24-bit */ |
| __be32 context_b; |
| struct qm_fd fd; |
| u8 __reserved4[32]; |
| } __packed; |
| #define QM_DQRR_VERB_VBIT 0x80 |
| #define QM_DQRR_VERB_MASK 0x7f /* where the verb contains; */ |
| #define QM_DQRR_VERB_FRAME_DEQUEUE 0x60 /* "this format" */ |
| #define QM_DQRR_STAT_FQ_EMPTY 0x80 /* FQ empty */ |
| #define QM_DQRR_STAT_FQ_HELDACTIVE 0x40 /* FQ held active */ |
| #define QM_DQRR_STAT_FQ_FORCEELIGIBLE 0x20 /* FQ was force-eligible'd */ |
| #define QM_DQRR_STAT_FD_VALID 0x10 /* has a non-NULL FD */ |
| #define QM_DQRR_STAT_UNSCHEDULED 0x02 /* Unscheduled dequeue */ |
| #define QM_DQRR_STAT_DQCR_EXPIRED 0x01 /* VDQCR or PDQCR expired*/ |
| |
| /* 'fqid' is a 24-bit field in every h/w descriptor */ |
| #define QM_FQID_MASK GENMASK(23, 0) |
| #define qm_fqid_set(p, v) ((p)->fqid = cpu_to_be32((v) & QM_FQID_MASK)) |
| #define qm_fqid_get(p) (be32_to_cpu((p)->fqid) & QM_FQID_MASK) |
| |
| /* "ERN Message Response" */ |
| /* "FQ State Change Notification" */ |
| union qm_mr_entry { |
| struct { |
| u8 verb; |
| u8 __reserved[63]; |
| }; |
| struct { |
| u8 verb; |
| u8 dca; |
| __be16 seqnum; |
| u8 rc; /* Rej Code: 8-bit */ |
| u8 __reserved[3]; |
| __be32 fqid; /* 24-bit */ |
| __be32 tag; |
| struct qm_fd fd; |
| u8 __reserved1[32]; |
| } __packed ern; |
| struct { |
| u8 verb; |
| u8 fqs; /* Frame Queue Status */ |
| u8 __reserved1[6]; |
| __be32 fqid; /* 24-bit */ |
| __be32 context_b; |
| u8 __reserved2[48]; |
| } __packed fq; /* FQRN/FQRNI/FQRL/FQPN */ |
| }; |
| #define QM_MR_VERB_VBIT 0x80 |
| /* |
| * ERNs originating from direct-connect portals ("dcern") use 0x20 as a verb |
| * which would be invalid as a s/w enqueue verb. A s/w ERN can be distinguished |
| * from the other MR types by noting if the 0x20 bit is unset. |
| */ |
| #define QM_MR_VERB_TYPE_MASK 0x27 |
| #define QM_MR_VERB_DC_ERN 0x20 |
| #define QM_MR_VERB_FQRN 0x21 |
| #define QM_MR_VERB_FQRNI 0x22 |
| #define QM_MR_VERB_FQRL 0x23 |
| #define QM_MR_VERB_FQPN 0x24 |
| #define QM_MR_RC_MASK 0xf0 /* contains one of; */ |
| #define QM_MR_RC_CGR_TAILDROP 0x00 |
| #define QM_MR_RC_WRED 0x10 |
| #define QM_MR_RC_ERROR 0x20 |
| #define QM_MR_RC_ORPWINDOW_EARLY 0x30 |
| #define QM_MR_RC_ORPWINDOW_LATE 0x40 |
| #define QM_MR_RC_FQ_TAILDROP 0x50 |
| #define QM_MR_RC_ORPWINDOW_RETIRED 0x60 |
| #define QM_MR_RC_ORP_ZERO 0x70 |
| #define QM_MR_FQS_ORLPRESENT 0x02 /* ORL fragments to come */ |
| #define QM_MR_FQS_NOTEMPTY 0x01 /* FQ has enqueued frames */ |
| |
| /* |
| * An identical structure of FQD fields is present in the "Init FQ" command and |
| * the "Query FQ" result, it's suctioned out into the "struct qm_fqd" type. |
| * Within that, the 'stashing' and 'taildrop' pieces are also factored out, the |
| * latter has two inlines to assist with converting to/from the mant+exp |
| * representation. |
| */ |
| struct qm_fqd_stashing { |
| /* See QM_STASHING_EXCL_<...> */ |
| u8 exclusive; |
| /* Numbers of cachelines */ |
| u8 cl; /* _res[6-7], as[4-5], ds[2-3], cs[0-1] */ |
| }; |
| |
| struct qm_fqd_oac { |
| /* "Overhead Accounting Control", see QM_OAC_<...> */ |
| u8 oac; /* oac[6-7], _res[0-5] */ |
| /* Two's-complement value (-128 to +127) */ |
| s8 oal; /* "Overhead Accounting Length" */ |
| }; |
| |
| struct qm_fqd { |
| /* _res[6-7], orprws[3-5], oa[2], olws[0-1] */ |
| u8 orpc; |
| u8 cgid; |
| __be16 fq_ctrl; /* See QM_FQCTRL_<...> */ |
| __be16 dest_wq; /* channel[3-15], wq[0-2] */ |
| __be16 ics_cred; /* 15-bit */ |
| /* |
| * For "Initialize Frame Queue" commands, the write-enable mask |
| * determines whether 'td' or 'oac_init' is observed. For query |
| * commands, this field is always 'td', and 'oac_query' (below) reflects |
| * the Overhead ACcounting values. |
| */ |
| union { |
| __be16 td; /* "Taildrop": _res[13-15], mant[5-12], exp[0-4] */ |
| struct qm_fqd_oac oac_init; |
| }; |
| __be32 context_b; |
| union { |
| /* Treat it as 64-bit opaque */ |
| __be64 opaque; |
| struct { |
| __be32 hi; |
| __be32 lo; |
| }; |
| /* Treat it as s/w portal stashing config */ |
| /* see "FQD Context_A field used for [...]" */ |
| struct { |
| struct qm_fqd_stashing stashing; |
| /* |
| * 48-bit address of FQ context to |
| * stash, must be cacheline-aligned |
| */ |
| __be16 context_hi; |
| __be32 context_lo; |
| } __packed; |
| } context_a; |
| struct qm_fqd_oac oac_query; |
| } __packed; |
| |
| #define QM_FQD_CHAN_OFF 3 |
| #define QM_FQD_WQ_MASK GENMASK(2, 0) |
| #define QM_FQD_TD_EXP_MASK GENMASK(4, 0) |
| #define QM_FQD_TD_MANT_OFF 5 |
| #define QM_FQD_TD_MANT_MASK GENMASK(12, 5) |
| #define QM_FQD_TD_MAX 0xe0000000 |
| #define QM_FQD_TD_MANT_MAX 0xff |
| #define QM_FQD_OAC_OFF 6 |
| #define QM_FQD_AS_OFF 4 |
| #define QM_FQD_DS_OFF 2 |
| #define QM_FQD_XS_MASK 0x3 |
| |
| /* 64-bit converters for context_hi/lo */ |
| static inline u64 qm_fqd_stashing_get64(const struct qm_fqd *fqd) |
| { |
| return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL; |
| } |
| |
| static inline dma_addr_t qm_fqd_stashing_addr(const struct qm_fqd *fqd) |
| { |
| return be64_to_cpu(fqd->context_a.opaque) & 0xffffffffffffULL; |
| } |
| |
| static inline u64 qm_fqd_context_a_get64(const struct qm_fqd *fqd) |
| { |
| return qm_fqd_stashing_get64(fqd); |
| } |
| |
| static inline void qm_fqd_stashing_set64(struct qm_fqd *fqd, u64 addr) |
| { |
| fqd->context_a.context_hi = cpu_to_be16(upper_32_bits(addr)); |
| fqd->context_a.context_lo = cpu_to_be32(lower_32_bits(addr)); |
| } |
| |
| static inline void qm_fqd_context_a_set64(struct qm_fqd *fqd, u64 addr) |
| { |
| fqd->context_a.hi = cpu_to_be32(upper_32_bits(addr)); |
| fqd->context_a.lo = cpu_to_be32(lower_32_bits(addr)); |
| } |
| |
| /* convert a threshold value into mant+exp representation */ |
| static inline int qm_fqd_set_taildrop(struct qm_fqd *fqd, u32 val, |
| int roundup) |
| { |
| u32 e = 0; |
| int td, oddbit = 0; |
| |
| if (val > QM_FQD_TD_MAX) |
| return -ERANGE; |
| |
| while (val > QM_FQD_TD_MANT_MAX) { |
| oddbit = val & 1; |
| val >>= 1; |
| e++; |
| if (roundup && oddbit) |
| val++; |
| } |
| |
| td = (val << QM_FQD_TD_MANT_OFF) & QM_FQD_TD_MANT_MASK; |
| td |= (e & QM_FQD_TD_EXP_MASK); |
| fqd->td = cpu_to_be16(td); |
| return 0; |
| } |
| /* and the other direction */ |
| static inline int qm_fqd_get_taildrop(const struct qm_fqd *fqd) |
| { |
| int td = be16_to_cpu(fqd->td); |
| |
| return ((td & QM_FQD_TD_MANT_MASK) >> QM_FQD_TD_MANT_OFF) |
| << (td & QM_FQD_TD_EXP_MASK); |
| } |
| |
| static inline void qm_fqd_set_stashing(struct qm_fqd *fqd, u8 as, u8 ds, u8 cs) |
| { |
| struct qm_fqd_stashing *st = &fqd->context_a.stashing; |
| |
| st->cl = ((as & QM_FQD_XS_MASK) << QM_FQD_AS_OFF) | |
| ((ds & QM_FQD_XS_MASK) << QM_FQD_DS_OFF) | |
| (cs & QM_FQD_XS_MASK); |
| } |
| |
| static inline u8 qm_fqd_get_stashing(const struct qm_fqd *fqd) |
| { |
| return fqd->context_a.stashing.cl; |
| } |
| |
| static inline void qm_fqd_set_oac(struct qm_fqd *fqd, u8 val) |
| { |
| fqd->oac_init.oac = val << QM_FQD_OAC_OFF; |
| } |
| |
| static inline void qm_fqd_set_oal(struct qm_fqd *fqd, s8 val) |
| { |
| fqd->oac_init.oal = val; |
| } |
| |
| static inline void qm_fqd_set_destwq(struct qm_fqd *fqd, int ch, int wq) |
| { |
| fqd->dest_wq = cpu_to_be16((ch << QM_FQD_CHAN_OFF) | |
| (wq & QM_FQD_WQ_MASK)); |
| } |
| |
| static inline int qm_fqd_get_chan(const struct qm_fqd *fqd) |
| { |
| return be16_to_cpu(fqd->dest_wq) >> QM_FQD_CHAN_OFF; |
| } |
| |
| static inline int qm_fqd_get_wq(const struct qm_fqd *fqd) |
| { |
| return be16_to_cpu(fqd->dest_wq) & QM_FQD_WQ_MASK; |
| } |
| |
| /* See "Frame Queue Descriptor (FQD)" */ |
| /* Frame Queue Descriptor (FQD) field 'fq_ctrl' uses these constants */ |
| #define QM_FQCTRL_MASK 0x07ff /* 'fq_ctrl' flags; */ |
| #define QM_FQCTRL_CGE 0x0400 /* Congestion Group Enable */ |
| #define QM_FQCTRL_TDE 0x0200 /* Tail-Drop Enable */ |
| #define QM_FQCTRL_CTXASTASHING 0x0080 /* Context-A stashing */ |
| #define QM_FQCTRL_CPCSTASH 0x0040 /* CPC Stash Enable */ |
| #define QM_FQCTRL_FORCESFDR 0x0008 /* High-priority SFDRs */ |
| #define QM_FQCTRL_AVOIDBLOCK 0x0004 /* Don't block active */ |
| #define QM_FQCTRL_HOLDACTIVE 0x0002 /* Hold active in portal */ |
| #define QM_FQCTRL_PREFERINCACHE 0x0001 /* Aggressively cache FQD */ |
| #define QM_FQCTRL_LOCKINCACHE QM_FQCTRL_PREFERINCACHE /* older naming */ |
| |
| /* See "FQD Context_A field used for [...] */ |
| /* Frame Queue Descriptor (FQD) field 'CONTEXT_A' uses these constants */ |
| #define QM_STASHING_EXCL_ANNOTATION 0x04 |
| #define QM_STASHING_EXCL_DATA 0x02 |
| #define QM_STASHING_EXCL_CTX 0x01 |
| |
| /* See "Intra Class Scheduling" */ |
| /* FQD field 'OAC' (Overhead ACcounting) uses these constants */ |
| #define QM_OAC_ICS 0x2 /* Accounting for Intra-Class Scheduling */ |
| #define QM_OAC_CG 0x1 /* Accounting for Congestion Groups */ |
| |
| /* |
| * This struct represents the 32-bit "WR_PARM_[GYR]" parameters in CGR fields |
| * and associated commands/responses. The WRED parameters are calculated from |
| * these fields as follows; |
| * MaxTH = MA * (2 ^ Mn) |
| * Slope = SA / (2 ^ Sn) |
| * MaxP = 4 * (Pn + 1) |
| */ |
| struct qm_cgr_wr_parm { |
| /* MA[24-31], Mn[19-23], SA[12-18], Sn[6-11], Pn[0-5] */ |
| __be32 word; |
| }; |
| /* |
| * This struct represents the 13-bit "CS_THRES" CGR field. In the corresponding |
| * management commands, this is padded to a 16-bit structure field, so that's |
| * how we represent it here. The congestion state threshold is calculated from |
| * these fields as follows; |
| * CS threshold = TA * (2 ^ Tn) |
| */ |
| struct qm_cgr_cs_thres { |
| /* _res[13-15], TA[5-12], Tn[0-4] */ |
| __be16 word; |
| }; |
| /* |
| * This identical structure of CGR fields is present in the "Init/Modify CGR" |
| * commands and the "Query CGR" result. It's suctioned out here into its own |
| * struct. |
| */ |
| struct __qm_mc_cgr { |
| struct qm_cgr_wr_parm wr_parm_g; |
| struct qm_cgr_wr_parm wr_parm_y; |
| struct qm_cgr_wr_parm wr_parm_r; |
| u8 wr_en_g; /* boolean, use QM_CGR_EN */ |
| u8 wr_en_y; /* boolean, use QM_CGR_EN */ |
| u8 wr_en_r; /* boolean, use QM_CGR_EN */ |
| u8 cscn_en; /* boolean, use QM_CGR_EN */ |
| union { |
| struct { |
| __be16 cscn_targ_upd_ctrl; /* use QM_CGR_TARG_UDP_* */ |
| __be16 cscn_targ_dcp_low; |
| }; |
| __be32 cscn_targ; /* use QM_CGR_TARG_* */ |
| }; |
| u8 cstd_en; /* boolean, use QM_CGR_EN */ |
| u8 cs; /* boolean, only used in query response */ |
| struct qm_cgr_cs_thres cs_thres; /* use qm_cgr_cs_thres_set64() */ |
| u8 mode; /* QMAN_CGR_MODE_FRAME not supported in rev1.0 */ |
| } __packed; |
| #define QM_CGR_EN 0x01 /* For wr_en_*, cscn_en, cstd_en */ |
| #define QM_CGR_TARG_UDP_CTRL_WRITE_BIT 0x8000 /* value written to portal bit*/ |
| #define QM_CGR_TARG_UDP_CTRL_DCP 0x4000 /* 0: SWP, 1: DCP */ |
| #define QM_CGR_TARG_PORTAL(n) (0x80000000 >> (n)) /* s/w portal, 0-9 */ |
| #define QM_CGR_TARG_FMAN0 0x00200000 /* direct-connect portal: fman0 */ |
| #define QM_CGR_TARG_FMAN1 0x00100000 /* : fman1 */ |
| /* Convert CGR thresholds to/from "cs_thres" format */ |
| static inline u64 qm_cgr_cs_thres_get64(const struct qm_cgr_cs_thres *th) |
| { |
| int thres = be16_to_cpu(th->word); |
| |
| return ((thres >> 5) & 0xff) << (thres & 0x1f); |
| } |
| |
| static inline int qm_cgr_cs_thres_set64(struct qm_cgr_cs_thres *th, u64 val, |
| int roundup) |
| { |
| u32 e = 0; |
| int oddbit = 0; |
| |
| while (val > 0xff) { |
| oddbit = val & 1; |
| val >>= 1; |
| e++; |
| if (roundup && oddbit) |
| val++; |
| } |
| th->word = cpu_to_be16(((val & 0xff) << 5) | (e & 0x1f)); |
| return 0; |
| } |
| |
| /* "Initialize FQ" */ |
| struct qm_mcc_initfq { |
| u8 __reserved1[2]; |
| __be16 we_mask; /* Write Enable Mask */ |
| __be32 fqid; /* 24-bit */ |
| __be16 count; /* Initialises 'count+1' FQDs */ |
| struct qm_fqd fqd; /* the FQD fields go here */ |
| u8 __reserved2[30]; |
| } __packed; |
| /* "Initialize/Modify CGR" */ |
| struct qm_mcc_initcgr { |
| u8 __reserve1[2]; |
| __be16 we_mask; /* Write Enable Mask */ |
| struct __qm_mc_cgr cgr; /* CGR fields */ |
| u8 __reserved2[2]; |
| u8 cgid; |
| u8 __reserved3[32]; |
| } __packed; |
| |
| /* INITFQ-specific flags */ |
| #define QM_INITFQ_WE_MASK 0x01ff /* 'Write Enable' flags; */ |
| #define QM_INITFQ_WE_OAC 0x0100 |
| #define QM_INITFQ_WE_ORPC 0x0080 |
| #define QM_INITFQ_WE_CGID 0x0040 |
| #define QM_INITFQ_WE_FQCTRL 0x0020 |
| #define QM_INITFQ_WE_DESTWQ 0x0010 |
| #define QM_INITFQ_WE_ICSCRED 0x0008 |
| #define QM_INITFQ_WE_TDTHRESH 0x0004 |
| #define QM_INITFQ_WE_CONTEXTB 0x0002 |
| #define QM_INITFQ_WE_CONTEXTA 0x0001 |
| /* INITCGR/MODIFYCGR-specific flags */ |
| #define QM_CGR_WE_MASK 0x07ff /* 'Write Enable Mask'; */ |
| #define QM_CGR_WE_WR_PARM_G 0x0400 |
| #define QM_CGR_WE_WR_PARM_Y 0x0200 |
| #define QM_CGR_WE_WR_PARM_R 0x0100 |
| #define QM_CGR_WE_WR_EN_G 0x0080 |
| #define QM_CGR_WE_WR_EN_Y 0x0040 |
| #define QM_CGR_WE_WR_EN_R 0x0020 |
| #define QM_CGR_WE_CSCN_EN 0x0010 |
| #define QM_CGR_WE_CSCN_TARG 0x0008 |
| #define QM_CGR_WE_CSTD_EN 0x0004 |
| #define QM_CGR_WE_CS_THRES 0x0002 |
| #define QM_CGR_WE_MODE 0x0001 |
| |
| #define QMAN_CGR_FLAG_USE_INIT 0x00000001 |
| |
| /* Portal and Frame Queues */ |
| /* Represents a managed portal */ |
| struct qman_portal; |
| |
| /* |
| * This object type represents QMan frame queue descriptors (FQD), it is |
| * cacheline-aligned, and initialised by qman_create_fq(). The structure is |
| * defined further down. |
| */ |
| struct qman_fq; |
| |
| /* |
| * This object type represents a QMan congestion group, it is defined further |
| * down. |
| */ |
| struct qman_cgr; |
| |
| /* |
| * This enum, and the callback type that returns it, are used when handling |
| * dequeued frames via DQRR. Note that for "null" callbacks registered with the |
| * portal object (for handling dequeues that do not demux because context_b is |
| * NULL), the return value *MUST* be qman_cb_dqrr_consume. |
| */ |
| enum qman_cb_dqrr_result { |
| /* DQRR entry can be consumed */ |
| qman_cb_dqrr_consume, |
| /* Like _consume, but requests parking - FQ must be held-active */ |
| qman_cb_dqrr_park, |
| /* Does not consume, for DCA mode only. */ |
| qman_cb_dqrr_defer, |
| /* |
| * Stop processing without consuming this ring entry. Exits the current |
| * qman_p_poll_dqrr() or interrupt-handling, as appropriate. If within |
| * an interrupt handler, the callback would typically call |
| * qman_irqsource_remove(QM_PIRQ_DQRI) before returning this value, |
| * otherwise the interrupt will reassert immediately. |
| */ |
| qman_cb_dqrr_stop, |
| /* Like qman_cb_dqrr_stop, but consumes the current entry. */ |
| qman_cb_dqrr_consume_stop |
| }; |
| typedef enum qman_cb_dqrr_result (*qman_cb_dqrr)(struct qman_portal *qm, |
| struct qman_fq *fq, |
| const struct qm_dqrr_entry *dqrr); |
| |
| /* |
| * This callback type is used when handling ERNs, FQRNs and FQRLs via MR. They |
| * are always consumed after the callback returns. |
| */ |
| typedef void (*qman_cb_mr)(struct qman_portal *qm, struct qman_fq *fq, |
| const union qm_mr_entry *msg); |
| |
| /* |
| * s/w-visible states. Ie. tentatively scheduled + truly scheduled + active + |
| * held-active + held-suspended are just "sched". Things like "retired" will not |
| * be assumed until it is complete (ie. QMAN_FQ_STATE_CHANGING is set until |
| * then, to indicate it's completing and to gate attempts to retry the retire |
| * command). Note, park commands do not set QMAN_FQ_STATE_CHANGING because it's |
| * technically impossible in the case of enqueue DCAs (which refer to DQRR ring |
| * index rather than the FQ that ring entry corresponds to), so repeated park |
| * commands are allowed (if you're silly enough to try) but won't change FQ |
| * state, and the resulting park notifications move FQs from "sched" to |
| * "parked". |
| */ |
| enum qman_fq_state { |
| qman_fq_state_oos, |
| qman_fq_state_parked, |
| qman_fq_state_sched, |
| qman_fq_state_retired |
| }; |
| |
| #define QMAN_FQ_STATE_CHANGING 0x80000000 /* 'state' is changing */ |
| #define QMAN_FQ_STATE_NE 0x40000000 /* retired FQ isn't empty */ |
| #define QMAN_FQ_STATE_ORL 0x20000000 /* retired FQ has ORL */ |
| #define QMAN_FQ_STATE_BLOCKOOS 0xe0000000 /* if any are set, no OOS */ |
| #define QMAN_FQ_STATE_CGR_EN 0x10000000 /* CGR enabled */ |
| #define QMAN_FQ_STATE_VDQCR 0x08000000 /* being volatile dequeued */ |
| |
| /* |
| * Frame queue objects (struct qman_fq) are stored within memory passed to |
| * qman_create_fq(), as this allows stashing of caller-provided demux callback |
| * pointers at no extra cost to stashing of (driver-internal) FQ state. If the |
| * caller wishes to add per-FQ state and have it benefit from dequeue-stashing, |
| * they should; |
| * |
| * (a) extend the qman_fq structure with their state; eg. |
| * |
| * // myfq is allocated and driver_fq callbacks filled in; |
| * struct my_fq { |
| * struct qman_fq base; |
| * int an_extra_field; |
| * [ ... add other fields to be associated with each FQ ...] |
| * } *myfq = some_my_fq_allocator(); |
| * struct qman_fq *fq = qman_create_fq(fqid, flags, &myfq->base); |
| * |
| * // in a dequeue callback, access extra fields from 'fq' via a cast; |
| * struct my_fq *myfq = (struct my_fq *)fq; |
| * do_something_with(myfq->an_extra_field); |
| * [...] |
| * |
| * (b) when and if configuring the FQ for context stashing, specify how ever |
| * many cachelines are required to stash 'struct my_fq', to accelerate not |
| * only the QMan driver but the callback as well. |
| */ |
| |
| struct qman_fq_cb { |
| qman_cb_dqrr dqrr; /* for dequeued frames */ |
| qman_cb_mr ern; /* for s/w ERNs */ |
| qman_cb_mr fqs; /* frame-queue state changes*/ |
| }; |
| |
| struct qman_fq { |
| /* Caller of qman_create_fq() provides these demux callbacks */ |
| struct qman_fq_cb cb; |
| /* |
| * These are internal to the driver, don't touch. In particular, they |
| * may change, be removed, or extended (so you shouldn't rely on |
| * sizeof(qman_fq) being a constant). |
| */ |
| u32 fqid, idx; |
| unsigned long flags; |
| enum qman_fq_state state; |
| int cgr_groupid; |
| }; |
| |
| /* |
| * This callback type is used when handling congestion group entry/exit. |
| * 'congested' is non-zero on congestion-entry, and zero on congestion-exit. |
| */ |
| typedef void (*qman_cb_cgr)(struct qman_portal *qm, |
| struct qman_cgr *cgr, int congested); |
| |
| struct qman_cgr { |
| /* Set these prior to qman_create_cgr() */ |
| u32 cgrid; /* 0..255, but u32 to allow specials like -1, 256, etc.*/ |
| qman_cb_cgr cb; |
| /* These are private to the driver */ |
| u16 chan; /* portal channel this object is created on */ |
| struct list_head node; |
| }; |
| |
| /* Flags to qman_create_fq() */ |
| #define QMAN_FQ_FLAG_NO_ENQUEUE 0x00000001 /* can't enqueue */ |
| #define QMAN_FQ_FLAG_NO_MODIFY 0x00000002 /* can only enqueue */ |
| #define QMAN_FQ_FLAG_TO_DCPORTAL 0x00000004 /* consumed by CAAM/PME/Fman */ |
| #define QMAN_FQ_FLAG_DYNAMIC_FQID 0x00000020 /* (de)allocate fqid */ |
| |
| /* Flags to qman_init_fq() */ |
| #define QMAN_INITFQ_FLAG_SCHED 0x00000001 /* schedule rather than park */ |
| #define QMAN_INITFQ_FLAG_LOCAL 0x00000004 /* set dest portal */ |
| |
| /* Portal Management */ |
| /** |
| * qman_p_irqsource_add - add processing sources to be interrupt-driven |
| * @bits: bitmask of QM_PIRQ_**I processing sources |
| * |
| * Adds processing sources that should be interrupt-driven (rather than |
| * processed via qman_poll_***() functions). |
| */ |
| void qman_p_irqsource_add(struct qman_portal *p, u32 bits); |
| |
| /** |
| * qman_p_irqsource_remove - remove processing sources from being int-driven |
| * @bits: bitmask of QM_PIRQ_**I processing sources |
| * |
| * Removes processing sources from being interrupt-driven, so that they will |
| * instead be processed via qman_poll_***() functions. |
| */ |
| void qman_p_irqsource_remove(struct qman_portal *p, u32 bits); |
| |
| /** |
| * qman_affine_cpus - return a mask of cpus that have affine portals |
| */ |
| const cpumask_t *qman_affine_cpus(void); |
| |
| /** |
| * qman_affine_channel - return the channel ID of an portal |
| * @cpu: the cpu whose affine portal is the subject of the query |
| * |
| * If @cpu is -1, the affine portal for the current CPU will be used. It is a |
| * bug to call this function for any value of @cpu (other than -1) that is not a |
| * member of the mask returned from qman_affine_cpus(). |
| */ |
| u16 qman_affine_channel(int cpu); |
| |
| /** |
| * qman_get_affine_portal - return the portal pointer affine to cpu |
| * @cpu: the cpu whose affine portal is the subject of the query |
| */ |
| struct qman_portal *qman_get_affine_portal(int cpu); |
| |
| /** |
| * qman_p_poll_dqrr - process DQRR (fast-path) entries |
| * @limit: the maximum number of DQRR entries to process |
| * |
| * Use of this function requires that DQRR processing not be interrupt-driven. |
| * The return value represents the number of DQRR entries processed. |
| */ |
| int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit); |
| |
| /** |
| * qman_p_static_dequeue_add - Add pool channels to the portal SDQCR |
| * @pools: bit-mask of pool channels, using QM_SDQCR_CHANNELS_POOL(n) |
| * |
| * Adds a set of pool channels to the portal's static dequeue command register |
| * (SDQCR). The requested pools are limited to those the portal has dequeue |
| * access to. |
| */ |
| void qman_p_static_dequeue_add(struct qman_portal *p, u32 pools); |
| |
| /* FQ management */ |
| /** |
| * qman_create_fq - Allocates a FQ |
| * @fqid: the index of the FQD to encapsulate, must be "Out of Service" |
| * @flags: bit-mask of QMAN_FQ_FLAG_*** options |
| * @fq: memory for storing the 'fq', with callbacks filled in |
| * |
| * Creates a frame queue object for the given @fqid, unless the |
| * QMAN_FQ_FLAG_DYNAMIC_FQID flag is set in @flags, in which case a FQID is |
| * dynamically allocated (or the function fails if none are available). Once |
| * created, the caller should not touch the memory at 'fq' except as extended to |
| * adjacent memory for user-defined fields (see the definition of "struct |
| * qman_fq" for more info). NO_MODIFY is only intended for enqueuing to |
| * pre-existing frame-queues that aren't to be otherwise interfered with, it |
| * prevents all other modifications to the frame queue. The TO_DCPORTAL flag |
| * causes the driver to honour any context_b modifications requested in the |
| * qm_init_fq() API, as this indicates the frame queue will be consumed by a |
| * direct-connect portal (PME, CAAM, or Fman). When frame queues are consumed by |
| * software portals, the context_b field is controlled by the driver and can't |
| * be modified by the caller. |
| */ |
| int qman_create_fq(u32 fqid, u32 flags, struct qman_fq *fq); |
| |
| /** |
| * qman_destroy_fq - Deallocates a FQ |
| * @fq: the frame queue object to release |
| * |
| * The memory for this frame queue object ('fq' provided in qman_create_fq()) is |
| * not deallocated but the caller regains ownership, to do with as desired. The |
| * FQ must be in the 'out-of-service' or in the 'parked' state. |
| */ |
| void qman_destroy_fq(struct qman_fq *fq); |
| |
| /** |
| * qman_fq_fqid - Queries the frame queue ID of a FQ object |
| * @fq: the frame queue object to query |
| */ |
| u32 qman_fq_fqid(struct qman_fq *fq); |
| |
| /** |
| * qman_init_fq - Initialises FQ fields, leaves the FQ "parked" or "scheduled" |
| * @fq: the frame queue object to modify, must be 'parked' or new. |
| * @flags: bit-mask of QMAN_INITFQ_FLAG_*** options |
| * @opts: the FQ-modification settings, as defined in the low-level API |
| * |
| * The @opts parameter comes from the low-level portal API. Select |
| * QMAN_INITFQ_FLAG_SCHED in @flags to cause the frame queue to be scheduled |
| * rather than parked. NB, @opts can be NULL. |
| * |
| * Note that some fields and options within @opts may be ignored or overwritten |
| * by the driver; |
| * 1. the 'count' and 'fqid' fields are always ignored (this operation only |
| * affects one frame queue: @fq). |
| * 2. the QM_INITFQ_WE_CONTEXTB option of the 'we_mask' field and the associated |
| * 'fqd' structure's 'context_b' field are sometimes overwritten; |
| * - if @fq was not created with QMAN_FQ_FLAG_TO_DCPORTAL, then context_b is |
| * initialised to a value used by the driver for demux. |
| * - if context_b is initialised for demux, so is context_a in case stashing |
| * is requested (see item 4). |
| * (So caller control of context_b is only possible for TO_DCPORTAL frame queue |
| * objects.) |
| * 3. if @flags contains QMAN_INITFQ_FLAG_LOCAL, the 'fqd' structure's |
| * 'dest::channel' field will be overwritten to match the portal used to issue |
| * the command. If the WE_DESTWQ write-enable bit had already been set by the |
| * caller, the channel workqueue will be left as-is, otherwise the write-enable |
| * bit is set and the workqueue is set to a default of 4. If the "LOCAL" flag |
| * isn't set, the destination channel/workqueue fields and the write-enable bit |
| * are left as-is. |
| * 4. if the driver overwrites context_a/b for demux, then if |
| * QM_INITFQ_WE_CONTEXTA is set, the driver will only overwrite |
| * context_a.address fields and will leave the stashing fields provided by the |
| * user alone, otherwise it will zero out the context_a.stashing fields. |
| */ |
| int qman_init_fq(struct qman_fq *fq, u32 flags, struct qm_mcc_initfq *opts); |
| |
| /** |
| * qman_schedule_fq - Schedules a FQ |
| * @fq: the frame queue object to schedule, must be 'parked' |
| * |
| * Schedules the frame queue, which must be Parked, which takes it to |
| * Tentatively-Scheduled or Truly-Scheduled depending on its fill-level. |
| */ |
| int qman_schedule_fq(struct qman_fq *fq); |
| |
| /** |
| * qman_retire_fq - Retires a FQ |
| * @fq: the frame queue object to retire |
| * @flags: FQ flags (QMAN_FQ_STATE*) if retirement completes immediately |
| * |
| * Retires the frame queue. This returns zero if it succeeds immediately, +1 if |
| * the retirement was started asynchronously, otherwise it returns negative for |
| * failure. When this function returns zero, @flags is set to indicate whether |
| * the retired FQ is empty and/or whether it has any ORL fragments (to show up |
| * as ERNs). Otherwise the corresponding flags will be known when a subsequent |
| * FQRN message shows up on the portal's message ring. |
| * |
| * NB, if the retirement is asynchronous (the FQ was in the Truly Scheduled or |
| * Active state), the completion will be via the message ring as a FQRN - but |
| * the corresponding callback may occur before this function returns!! Ie. the |
| * caller should be prepared to accept the callback as the function is called, |
| * not only once it has returned. |
| */ |
| int qman_retire_fq(struct qman_fq *fq, u32 *flags); |
| |
| /** |
| * qman_oos_fq - Puts a FQ "out of service" |
| * @fq: the frame queue object to be put out-of-service, must be 'retired' |
| * |
| * The frame queue must be retired and empty, and if any order restoration list |
| * was released as ERNs at the time of retirement, they must all be consumed. |
| */ |
| int qman_oos_fq(struct qman_fq *fq); |
| |
| /** |
| * qman_enqueue - Enqueue a frame to a frame queue |
| * @fq: the frame queue object to enqueue to |
| * @fd: a descriptor of the frame to be enqueued |
| * |
| * Fills an entry in the EQCR of portal @qm to enqueue the frame described by |
| * @fd. The descriptor details are copied from @fd to the EQCR entry, the 'pid' |
| * field is ignored. The return value is non-zero on error, such as ring full. |
| */ |
| int qman_enqueue(struct qman_fq *fq, const struct qm_fd *fd); |
| |
| /** |
| * qman_alloc_fqid_range - Allocate a contiguous range of FQIDs |
| * @result: is set by the API to the base FQID of the allocated range |
| * @count: the number of FQIDs required |
| * |
| * Returns 0 on success, or a negative error code. |
| */ |
| int qman_alloc_fqid_range(u32 *result, u32 count); |
| #define qman_alloc_fqid(result) qman_alloc_fqid_range(result, 1) |
| |
| /** |
| * qman_release_fqid - Release the specified frame queue ID |
| * @fqid: the FQID to be released back to the resource pool |
| * |
| * This function can also be used to seed the allocator with |
| * FQID ranges that it can subsequently allocate from. |
| * Returns 0 on success, or a negative error code. |
| */ |
| int qman_release_fqid(u32 fqid); |
| |
| /* Pool-channel management */ |
| /** |
| * qman_alloc_pool_range - Allocate a contiguous range of pool-channel IDs |
| * @result: is set by the API to the base pool-channel ID of the allocated range |
| * @count: the number of pool-channel IDs required |
| * |
| * Returns 0 on success, or a negative error code. |
| */ |
| int qman_alloc_pool_range(u32 *result, u32 count); |
| #define qman_alloc_pool(result) qman_alloc_pool_range(result, 1) |
| |
| /** |
| * qman_release_pool - Release the specified pool-channel ID |
| * @id: the pool-chan ID to be released back to the resource pool |
| * |
| * This function can also be used to seed the allocator with |
| * pool-channel ID ranges that it can subsequently allocate from. |
| * Returns 0 on success, or a negative error code. |
| */ |
| int qman_release_pool(u32 id); |
| |
| /* CGR management */ |
| /** |
| * qman_create_cgr - Register a congestion group object |
| * @cgr: the 'cgr' object, with fields filled in |
| * @flags: QMAN_CGR_FLAG_* values |
| * @opts: optional state of CGR settings |
| * |
| * Registers this object to receiving congestion entry/exit callbacks on the |
| * portal affine to the cpu portal on which this API is executed. If opts is |
| * NULL then only the callback (cgr->cb) function is registered. If @flags |
| * contains QMAN_CGR_FLAG_USE_INIT, then an init hw command (which will reset |
| * any unspecified parameters) will be used rather than a modify hw hardware |
| * (which only modifies the specified parameters). |
| */ |
| int qman_create_cgr(struct qman_cgr *cgr, u32 flags, |
| struct qm_mcc_initcgr *opts); |
| |
| /** |
| * qman_delete_cgr - Deregisters a congestion group object |
| * @cgr: the 'cgr' object to deregister |
| * |
| * "Unplugs" this CGR object from the portal affine to the cpu on which this API |
| * is executed. This must be excuted on the same affine portal on which it was |
| * created. |
| */ |
| int qman_delete_cgr(struct qman_cgr *cgr); |
| |
| /** |
| * qman_delete_cgr_safe - Deregisters a congestion group object from any CPU |
| * @cgr: the 'cgr' object to deregister |
| * |
| * This will select the proper CPU and run there qman_delete_cgr(). |
| */ |
| void qman_delete_cgr_safe(struct qman_cgr *cgr); |
| |
| /** |
| * qman_query_cgr_congested - Queries CGR's congestion status |
| * @cgr: the 'cgr' object to query |
| * @result: returns 'cgr's congestion status, 1 (true) if congested |
| */ |
| int qman_query_cgr_congested(struct qman_cgr *cgr, bool *result); |
| |
| /** |
| * qman_alloc_cgrid_range - Allocate a contiguous range of CGR IDs |
| * @result: is set by the API to the base CGR ID of the allocated range |
| * @count: the number of CGR IDs required |
| * |
| * Returns 0 on success, or a negative error code. |
| */ |
| int qman_alloc_cgrid_range(u32 *result, u32 count); |
| #define qman_alloc_cgrid(result) qman_alloc_cgrid_range(result, 1) |
| |
| /** |
| * qman_release_cgrid - Release the specified CGR ID |
| * @id: the CGR ID to be released back to the resource pool |
| * |
| * This function can also be used to seed the allocator with |
| * CGR ID ranges that it can subsequently allocate from. |
| * Returns 0 on success, or a negative error code. |
| */ |
| int qman_release_cgrid(u32 id); |
| |
| #endif /* __FSL_QMAN_H */ |