| /* |
| * |
| * (C) COPYRIGHT 2013-2016 ARM Limited. All rights reserved. |
| * |
| * This program is free software and is provided to you under the terms of the |
| * GNU General Public License version 2 as published by the Free Software |
| * Foundation, and any use by you of this program is subject to the terms |
| * of such GNU licence. |
| * |
| * ARM Mali DP hardware manipulation routines. |
| */ |
| |
| #ifndef __MALIDP_HW_H__ |
| #define __MALIDP_HW_H__ |
| |
| #include <linux/bitops.h> |
| #include "malidp_regs.h" |
| |
| struct videomode; |
| struct clk; |
| |
| /* Mali DP IP blocks */ |
| enum { |
| MALIDP_DE_BLOCK = 0, |
| MALIDP_SE_BLOCK, |
| MALIDP_DC_BLOCK |
| }; |
| |
| /* Mali DP layer IDs */ |
| enum { |
| DE_VIDEO1 = BIT(0), |
| DE_GRAPHICS1 = BIT(1), |
| DE_GRAPHICS2 = BIT(2), /* used only in DP500 */ |
| DE_VIDEO2 = BIT(3), |
| DE_SMART = BIT(4), |
| }; |
| |
| struct malidp_format_id { |
| u32 format; /* DRM fourcc */ |
| u8 layer; /* bitmask of layers supporting it */ |
| u8 id; /* used internally */ |
| }; |
| |
| #define MALIDP_INVALID_FORMAT_ID 0xff |
| |
| /* |
| * hide the differences between register maps |
| * by using a common structure to hold the |
| * base register offsets |
| */ |
| |
| struct malidp_irq_map { |
| u32 irq_mask; /* mask of IRQs that can be enabled in the block */ |
| u32 vsync_irq; /* IRQ bit used for signaling during VSYNC */ |
| }; |
| |
| struct malidp_layer { |
| u16 id; /* layer ID */ |
| u16 base; /* address offset for the register bank */ |
| u16 ptr; /* address offset for the pointer register */ |
| u16 stride_offset; /* Offset to the first stride register. */ |
| }; |
| |
| /* regmap features */ |
| #define MALIDP_REGMAP_HAS_CLEARIRQ (1 << 0) |
| |
| struct malidp_hw_regmap { |
| /* address offset of the DE register bank */ |
| /* is always 0x0000 */ |
| /* address offset of the SE registers bank */ |
| const u16 se_base; |
| /* address offset of the DC registers bank */ |
| const u16 dc_base; |
| |
| /* address offset for the output depth register */ |
| const u16 out_depth_base; |
| |
| /* bitmap with register map features */ |
| const u8 features; |
| |
| /* list of supported layers */ |
| const u8 n_layers; |
| const struct malidp_layer *layers; |
| |
| const struct malidp_irq_map de_irq_map; |
| const struct malidp_irq_map se_irq_map; |
| const struct malidp_irq_map dc_irq_map; |
| |
| /* list of supported pixel formats for each layer */ |
| const struct malidp_format_id *pixel_formats; |
| const u8 n_pixel_formats; |
| |
| /* pitch alignment requirement in bytes */ |
| const u8 bus_align_bytes; |
| }; |
| |
| /* device features */ |
| /* Unlike DP550/650, DP500 has 3 stride registers in its video layer. */ |
| #define MALIDP_DEVICE_LV_HAS_3_STRIDES BIT(0) |
| |
| struct malidp_hw_device { |
| const struct malidp_hw_regmap map; |
| void __iomem *regs; |
| |
| /* APB clock */ |
| struct clk *pclk; |
| /* AXI clock */ |
| struct clk *aclk; |
| /* main clock for display core */ |
| struct clk *mclk; |
| /* pixel clock for display core */ |
| struct clk *pxlclk; |
| |
| /* |
| * Validate the driver instance against the hardware bits |
| */ |
| int (*query_hw)(struct malidp_hw_device *hwdev); |
| |
| /* |
| * Set the hardware into config mode, ready to accept mode changes |
| */ |
| void (*enter_config_mode)(struct malidp_hw_device *hwdev); |
| |
| /* |
| * Tell hardware to exit configuration mode |
| */ |
| void (*leave_config_mode)(struct malidp_hw_device *hwdev); |
| |
| /* |
| * Query if hardware is in configuration mode |
| */ |
| bool (*in_config_mode)(struct malidp_hw_device *hwdev); |
| |
| /* |
| * Set configuration valid flag for hardware parameters that can |
| * be changed outside the configuration mode. Hardware will use |
| * the new settings when config valid is set after the end of the |
| * current buffer scanout |
| */ |
| void (*set_config_valid)(struct malidp_hw_device *hwdev); |
| |
| /* |
| * Set a new mode in hardware. Requires the hardware to be in |
| * configuration mode before this function is called. |
| */ |
| void (*modeset)(struct malidp_hw_device *hwdev, struct videomode *m); |
| |
| /* |
| * Calculate the required rotation memory given the active area |
| * and the buffer format. |
| */ |
| int (*rotmem_required)(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt); |
| |
| u8 features; |
| |
| u8 min_line_size; |
| u16 max_line_size; |
| |
| /* size of memory used for rotating layers, up to two banks available */ |
| u32 rotation_memory[2]; |
| }; |
| |
| /* Supported variants of the hardware */ |
| enum { |
| MALIDP_500 = 0, |
| MALIDP_550, |
| MALIDP_650, |
| /* keep the next entry last */ |
| MALIDP_MAX_DEVICES |
| }; |
| |
| extern const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES]; |
| |
| static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg) |
| { |
| return readl(hwdev->regs + reg); |
| } |
| |
| static inline void malidp_hw_write(struct malidp_hw_device *hwdev, |
| u32 value, u32 reg) |
| { |
| writel(value, hwdev->regs + reg); |
| } |
| |
| static inline void malidp_hw_setbits(struct malidp_hw_device *hwdev, |
| u32 mask, u32 reg) |
| { |
| u32 data = malidp_hw_read(hwdev, reg); |
| |
| data |= mask; |
| malidp_hw_write(hwdev, data, reg); |
| } |
| |
| static inline void malidp_hw_clearbits(struct malidp_hw_device *hwdev, |
| u32 mask, u32 reg) |
| { |
| u32 data = malidp_hw_read(hwdev, reg); |
| |
| data &= ~mask; |
| malidp_hw_write(hwdev, data, reg); |
| } |
| |
| static inline u32 malidp_get_block_base(struct malidp_hw_device *hwdev, |
| u8 block) |
| { |
| switch (block) { |
| case MALIDP_SE_BLOCK: |
| return hwdev->map.se_base; |
| case MALIDP_DC_BLOCK: |
| return hwdev->map.dc_base; |
| } |
| |
| return 0; |
| } |
| |
| static inline void malidp_hw_disable_irq(struct malidp_hw_device *hwdev, |
| u8 block, u32 irq) |
| { |
| u32 base = malidp_get_block_base(hwdev, block); |
| |
| malidp_hw_clearbits(hwdev, irq, base + MALIDP_REG_MASKIRQ); |
| } |
| |
| static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev, |
| u8 block, u32 irq) |
| { |
| u32 base = malidp_get_block_base(hwdev, block); |
| |
| malidp_hw_setbits(hwdev, irq, base + MALIDP_REG_MASKIRQ); |
| } |
| |
| int malidp_de_irq_init(struct drm_device *drm, int irq); |
| void malidp_de_irq_fini(struct drm_device *drm); |
| int malidp_se_irq_init(struct drm_device *drm, int irq); |
| void malidp_se_irq_fini(struct drm_device *drm); |
| |
| u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map, |
| u8 layer_id, u32 format); |
| |
| static inline bool malidp_hw_pitch_valid(struct malidp_hw_device *hwdev, |
| unsigned int pitch) |
| { |
| return !(pitch & (hwdev->map.bus_align_bytes - 1)); |
| } |
| |
| /* |
| * background color components are defined as 12bits values, |
| * they will be shifted right when stored on hardware that |
| * supports only 8bits per channel |
| */ |
| #define MALIDP_BGND_COLOR_R 0x000 |
| #define MALIDP_BGND_COLOR_G 0x000 |
| #define MALIDP_BGND_COLOR_B 0x000 |
| |
| #endif /* __MALIDP_HW_H__ */ |