arch/powerpc/kernel/idle_book3s.S - LeafOS-Devices/android_kernel_realme_mt6785 - Gitiles

 /*
  *  This file contains idle entry/exit functions for POWER7,
  *  POWER8 and POWER9 CPUs.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */

 #include <linux/threads.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/cputable.h>
 #include <asm/thread_info.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/ppc-opcode.h>
 #include <asm/hw_irq.h>
 #include <asm/kvm_book3s_asm.h>
 #include <asm/opal.h>
 #include <asm/cpuidle.h>
 #include <asm/book3s/64/mmu-hash.h>
 #include <asm/mmu.h>

 #undef DEBUG

 /*
  * Use unused space in the interrupt stack to save and restore
  * registers for winkle support.
  */
 #define _SDR1	GPR3
 #define _RPR	GPR4
 #define _SPURR	GPR5
 #define _PURR	GPR6
 #define _TSCR	GPR7
 #define _DSCR	GPR8
 #define _AMOR	GPR9
 #define _WORT	GPR10
 #define _WORC	GPR11
 #define _PTCR	GPR12

 #define PSSCR_EC_ESL_MASK_SHIFTED          (PSSCR_EC | PSSCR_ESL) >> 16

 	.text

 /*
  * Used by threads before entering deep idle states. Saves SPRs
  * in interrupt stack frame
  */
 save_sprs_to_stack:
 	/*
 	 * Note all register i.e per-core, per-subcore or per-thread is saved
 	 * here since any thread in the core might wake up first
 	 */
 BEGIN_FTR_SECTION
 	mfspr	r3,SPRN_PTCR
 	std	r3,_PTCR(r1)
 	/*
 	 * Note - SDR1 is dropped in Power ISA v3. Hence not restoring
 	 * SDR1 here
 	 */
 FTR_SECTION_ELSE
 	mfspr	r3,SPRN_SDR1
 	std	r3,_SDR1(r1)
 ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
 	mfspr	r3,SPRN_RPR
 	std	r3,_RPR(r1)
 	mfspr	r3,SPRN_SPURR
 	std	r3,_SPURR(r1)
 	mfspr	r3,SPRN_PURR
 	std	r3,_PURR(r1)
 	mfspr	r3,SPRN_TSCR
 	std	r3,_TSCR(r1)
 	mfspr	r3,SPRN_DSCR
 	std	r3,_DSCR(r1)
 	mfspr	r3,SPRN_AMOR
 	std	r3,_AMOR(r1)
 	mfspr	r3,SPRN_WORT
 	std	r3,_WORT(r1)
 	mfspr	r3,SPRN_WORC
 	std	r3,_WORC(r1)

 	blr

 /*
  * Used by threads when the lock bit of core_idle_state is set.
  * Threads will spin in HMT_LOW until the lock bit is cleared.
  * r14 - pointer to core_idle_state
  * r15 - used to load contents of core_idle_state
  * r9  - used as a temporary variable
  */

 core_idle_lock_held:
 	HMT_LOW
 3:	lwz	r15,0(r14)
 	andi.   r15,r15,PNV_CORE_IDLE_LOCK_BIT
 	bne	3b
 	HMT_MEDIUM
 	lwarx	r15,0,r14
 	andi.	r9,r15,PNV_CORE_IDLE_LOCK_BIT
 	bne	core_idle_lock_held
 	blr

 /*
  * Pass requested state in r3:
  *	r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8
  *	   - Requested STOP state in POWER9
  *
  * To check IRQ_HAPPENED in r4
  * 	0 - don't check
  * 	1 - check
  *
  * Address to 'rfid' to in r5
  */
 _GLOBAL(pnv_powersave_common)
 	/* Use r3 to pass state nap/sleep/winkle */
 	/* NAP is a state loss, we create a regs frame on the
 	 * stack, fill it up with the state we care about and
 	 * stick a pointer to it in PACAR1. We really only
 	 * need to save PC, some CR bits and the NV GPRs,
 	 * but for now an interrupt frame will do.
 	 */
 	mflr	r0
 	std	r0,16(r1)
 	stdu	r1,-INT_FRAME_SIZE(r1)
 	std	r0,_LINK(r1)
 	std	r0,_NIP(r1)

 	/* Hard disable interrupts */
 	mfmsr	r9
 	rldicl	r9,r9,48,1
 	rotldi	r9,r9,16
 	mtmsrd	r9,1			/* hard-disable interrupts */

 	/* Check if something happened while soft-disabled */
 	lbz	r0,PACAIRQHAPPENED(r13)
 	andi.	r0,r0,~PACA_IRQ_HARD_DIS@l
 	beq	1f
 	cmpwi	cr0,r4,0
 	beq	1f
 	addi	r1,r1,INT_FRAME_SIZE
 	ld	r0,16(r1)
 	li	r3,0			/* Return 0 (no nap) */
 	mtlr	r0
 	blr

 1:	/* We mark irqs hard disabled as this is the state we'll
 	 * be in when returning and we need to tell arch_local_irq_restore()
 	 * about it
 	 */
 	li	r0,PACA_IRQ_HARD_DIS
 	stb	r0,PACAIRQHAPPENED(r13)

 	/* We haven't lost state ... yet */
 	li	r0,0
 	stb	r0,PACA_NAPSTATELOST(r13)

 	/* Continue saving state */
 	SAVE_GPR(2, r1)
 	SAVE_NVGPRS(r1)
 	mfcr	r4
 	std	r4,_CCR(r1)
 	std	r9,_MSR(r1)
 	std	r1,PACAR1(r13)

 	/*
 	 * Go to real mode to do the nap, as required by the architecture.
 	 * Also, we need to be in real mode before setting hwthread_state,
 	 * because as soon as we do that, another thread can switch
 	 * the MMU context to the guest.
 	 */
 	LOAD_REG_IMMEDIATE(r7, MSR_IDLE)
 	li	r6, MSR_RI
 	andc	r6, r9, r6
 	mtmsrd	r6, 1		/* clear RI before setting SRR0/1 */
 	mtspr	SPRN_SRR0, r5
 	mtspr	SPRN_SRR1, r7
 	rfid

 	.globl pnv_enter_arch207_idle_mode
 pnv_enter_arch207_idle_mode:
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	/* Tell KVM we're entering idle */
 	li	r4,KVM_HWTHREAD_IN_IDLE
 	/******************************************************/
 	/*  N O T E   W E L L    ! ! !    N O T E   W E L L   */
 	/* The following store to HSTATE_HWTHREAD_STATE(r13)  */
 	/* MUST occur in real mode, i.e. with the MMU off,    */
 	/* and the MMU must stay off until we clear this flag */
 	/* and test HSTATE_HWTHREAD_REQ(r13) in the system    */
 	/* reset interrupt vector in exceptions-64s.S.        */
 	/* The reason is that another thread can switch the   */
 	/* MMU to a guest context whenever this flag is set   */
 	/* to KVM_HWTHREAD_IN_IDLE, and if the MMU was on,    */
 	/* that would potentially cause this thread to start  */
 	/* executing instructions from guest memory in        */
 	/* hypervisor mode, leading to a host crash or data   */
 	/* corruption, or worse.                              */
 	/******************************************************/
 	stb	r4,HSTATE_HWTHREAD_STATE(r13)
 #endif
 	stb	r3,PACA_THREAD_IDLE_STATE(r13)
 	cmpwi	cr3,r3,PNV_THREAD_SLEEP
 	bge	cr3,2f
 	IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
 	/* No return */
 2:
 	/* Sleep or winkle */
 	lbz	r7,PACA_THREAD_MASK(r13)
 	ld	r14,PACA_CORE_IDLE_STATE_PTR(r13)
 lwarx_loop1:
 	lwarx	r15,0,r14

 	andi.   r9,r15,PNV_CORE_IDLE_LOCK_BIT
 	bnel	core_idle_lock_held

 	andc	r15,r15,r7			/* Clear thread bit */

 	andi.	r15,r15,PNV_CORE_IDLE_THREAD_BITS

 /*
  * If cr0 = 0, then current thread is the last thread of the core entering
  * sleep. Last thread needs to execute the hardware bug workaround code if
  * required by the platform.
  * Make the workaround call unconditionally here. The below branch call is
  * patched out when the idle states are discovered if the platform does not
  * require it.
  */
 .global pnv_fastsleep_workaround_at_entry
 pnv_fastsleep_workaround_at_entry:
 	beq	fastsleep_workaround_at_entry

 	stwcx.	r15,0,r14
 	bne-	lwarx_loop1
 	isync

 common_enter: /* common code for all the threads entering sleep or winkle */
 	bgt	cr3,enter_winkle
 	IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)

 fastsleep_workaround_at_entry:
 	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
 	stwcx.	r15,0,r14
 	bne-	lwarx_loop1
 	isync

 	/* Fast sleep workaround */
 	li	r3,1
 	li	r4,1
 	bl	opal_config_cpu_idle_state

 	/* Clear Lock bit */
 	li	r0,0
 	lwsync
 	stw	r0,0(r14)
 	b	common_enter

 enter_winkle:
 	bl	save_sprs_to_stack

 	IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)

 /*
  * r3 - PSSCR value corresponding to the requested stop state.
  */
 power_enter_stop:
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	/* Tell KVM we're entering idle */
 	li	r4,KVM_HWTHREAD_IN_IDLE
 	/* DO THIS IN REAL MODE!  See comment above. */
 	stb	r4,HSTATE_HWTHREAD_STATE(r13)
 #endif
 /*
  * Check if we are executing the lite variant with ESL=EC=0
  */
 	andis.   r4,r3,PSSCR_EC_ESL_MASK_SHIFTED
 	clrldi   r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */
 	bne	 .Lhandle_esl_ec_set
 	IDLE_STATE_ENTER_SEQ(PPC_STOP)
 	li	r3,0  /* Since we didn't lose state, return 0 */
 	b 	pnv_wakeup_noloss

 .Lhandle_esl_ec_set:
 /*
  * Check if the requested state is a deep idle state.
  */
 	LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
 	ld	r4,ADDROFF(pnv_first_deep_stop_state)(r5)
 	cmpd	r3,r4
 	bge	.Lhandle_deep_stop
 	IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)
 .Lhandle_deep_stop:
 /*
  * Entering deep idle state.
  * Clear thread bit in PACA_CORE_IDLE_STATE, save SPRs to
  * stack and enter stop
  */
 	lbz     r7,PACA_THREAD_MASK(r13)
 	ld      r14,PACA_CORE_IDLE_STATE_PTR(r13)

 lwarx_loop_stop:
 	lwarx   r15,0,r14
 	andi.   r9,r15,PNV_CORE_IDLE_LOCK_BIT
 	bnel    core_idle_lock_held
 	andc    r15,r15,r7                      /* Clear thread bit */

 	stwcx.  r15,0,r14
 	bne-    lwarx_loop_stop
 	isync

 	bl	save_sprs_to_stack

 	IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)

 _GLOBAL(power7_idle)
 	/* Now check if user or arch enabled NAP mode */
 	LOAD_REG_ADDRBASE(r3,powersave_nap)
 	lwz	r4,ADDROFF(powersave_nap)(r3)
 	cmpwi	0,r4,0
 	beqlr
 	li	r3, 1
 	/* fall through */

 _GLOBAL(power7_nap)
 	mr	r4,r3
 	li	r3,PNV_THREAD_NAP
 	LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
 	b	pnv_powersave_common
 	/* No return */

 _GLOBAL(power7_sleep)
 	li	r3,PNV_THREAD_SLEEP
 	li	r4,1
 	LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
 	b	pnv_powersave_common
 	/* No return */

 _GLOBAL(power7_winkle)
 	li	r3,PNV_THREAD_WINKLE
 	li	r4,1
 	LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
 	b	pnv_powersave_common
 	/* No return */

 #define CHECK_HMI_INTERRUPT						\
 	mfspr	r0,SPRN_SRR1;						\
 BEGIN_FTR_SECTION_NESTED(66);						\
 	rlwinm	r0,r0,45-31,0xf;  /* extract wake reason field (P8) */	\
 FTR_SECTION_ELSE_NESTED(66);						\
 	rlwinm	r0,r0,45-31,0xe;  /* P7 wake reason field is 3 bits */	\
 ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66);		\
 	cmpwi	r0,0xa;			/* Hypervisor maintenance ? */	\
 	bne	20f;							\
 	/* Invoke opal call to handle hmi */				\
 	ld	r2,PACATOC(r13);					\
 	ld	r1,PACAR1(r13);						\
 	std	r3,ORIG_GPR3(r1);	/* Save original r3 */		\
 	li	r3,0;			/* NULL argument */		\
 	bl	hmi_exception_realmode;					\
 	nop;								\
 	ld	r3,ORIG_GPR3(r1);	/* Restore original r3 */	\
 20:	nop;

 /*
  * r3 - The PSSCR value corresponding to the stop state.
  * r4 - The PSSCR mask corrresonding to the stop state.
  */
 _GLOBAL(power9_idle_stop)
 	mfspr   r5,SPRN_PSSCR
 	andc    r5,r5,r4
 	or      r3,r3,r5
 	mtspr 	SPRN_PSSCR,r3
 	LOAD_REG_ADDR(r5,power_enter_stop)
 	li	r4,1
 	b	pnv_powersave_common
 	/* No return */
 /*
  * Called from reset vector. Check whether we have woken up with
  * hypervisor state loss. If yes, restore hypervisor state and return
  * back to reset vector.
  *
  * r13 - Contents of HSPRG0
  * cr3 - set to gt if waking up with partial/complete hypervisor state loss
  */
 _GLOBAL(pnv_restore_hyp_resource)
 BEGIN_FTR_SECTION
 	ld	r2,PACATOC(r13);
 	/*
 	 * POWER ISA 3. Use PSSCR to determine if we
 	 * are waking up from deep idle state
 	 */
 	LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
 	ld	r4,ADDROFF(pnv_first_deep_stop_state)(r5)

 	mfspr	r5,SPRN_PSSCR
 	/*
 	 * 0-3 bits correspond to Power-Saving Level Status
 	 * which indicates the idle state we are waking up from
 	 */
 	rldicl  r5,r5,4,60
 	cmpd	cr4,r5,r4
 	bge	cr4,pnv_wakeup_tb_loss
 	/*
 	 * Waking up without hypervisor state loss. Return to
 	 * reset vector
 	 */
 	blr

 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)

 	/*
 	 * POWER ISA 2.07 or less.
 	 * Check if last bit of HSPGR0 is set. This indicates whether we are
 	 * waking up from winkle.
 	 */
 	clrldi	r5,r13,63
 	clrrdi	r13,r13,1

 	/* Now that we are sure r13 is corrected, load TOC */
 	ld	r2,PACATOC(r13);
 	cmpwi	cr4,r5,1
 	mtspr	SPRN_HSPRG0,r13

 	lbz	r0,PACA_THREAD_IDLE_STATE(r13)
 	cmpwi   cr2,r0,PNV_THREAD_NAP
 	bgt     cr2,pnv_wakeup_tb_loss	/* Either sleep or Winkle */

 	/*
 	 * We fall through here if PACA_THREAD_IDLE_STATE shows we are waking
 	 * up from nap. At this stage CR3 shouldn't contains 'gt' since that
 	 * indicates we are waking with hypervisor state loss from nap.
 	 */
 	bgt	cr3,.

 	blr	/* Return back to System Reset vector from where
 		   pnv_restore_hyp_resource was invoked */

 /*
  * Called if waking up from idle state which can cause either partial or
  * complete hyp state loss.
  * In POWER8, called if waking up from fastsleep or winkle
  * In POWER9, called if waking up from stop state >= pnv_first_deep_stop_state
  *
  * r13 - PACA
  * cr3 - gt if waking up with partial/complete hypervisor state loss
  * cr4 - gt or eq if waking up from complete hypervisor state loss.
  */
 _GLOBAL(pnv_wakeup_tb_loss)
 	ld	r1,PACAR1(r13)
 	/*
 	 * Before entering any idle state, the NVGPRs are saved in the stack.
 	 * If there was a state loss, or PACA_NAPSTATELOST was set, then the
 	 * NVGPRs are restored. If we are here, it is likely that state is lost,
 	 * but not guaranteed -- neither ISA207 nor ISA300 tests to reach
 	 * here are the same as the test to restore NVGPRS:
 	 * PACA_THREAD_IDLE_STATE test for ISA207, PSSCR test for ISA300,
 	 * and SRR1 test for restoring NVGPRs.
 	 *
 	 * We are about to clobber NVGPRs now, so set NAPSTATELOST to
 	 * guarantee they will always be restored. This might be tightened
 	 * with careful reading of specs (particularly for ISA300) but this
 	 * is already a slow wakeup path and it's simpler to be safe.
 	 */
 	li	r0,1
 	stb	r0,PACA_NAPSTATELOST(r13)

 	/*
 	 *
 	 * Save SRR1 and LR in NVGPRs as they might be clobbered in
 	 * opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required
 	 * to determine the wakeup reason if we branch to kvm_start_guest. LR
 	 * is required to return back to reset vector after hypervisor state
 	 * restore is complete.
 	 */
 	mflr	r17
 	mfspr	r16,SPRN_SRR1
 BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)

 	lbz	r7,PACA_THREAD_MASK(r13)
 	ld	r14,PACA_CORE_IDLE_STATE_PTR(r13)
 lwarx_loop2:
 	lwarx	r15,0,r14
 	andi.	r9,r15,PNV_CORE_IDLE_LOCK_BIT
 	/*
 	 * Lock bit is set in one of the 2 cases-
 	 * a. In the sleep/winkle enter path, the last thread is executing
 	 * fastsleep workaround code.
 	 * b. In the wake up path, another thread is executing fastsleep
 	 * workaround undo code or resyncing timebase or restoring context
 	 * In either case loop until the lock bit is cleared.
 	 */
 	bnel	core_idle_lock_held

 	cmpwi	cr2,r15,0

 	/*
 	 * At this stage
 	 * cr2 - eq if first thread to wakeup in core
 	 * cr3-  gt if waking up with partial/complete hypervisor state loss
 	 * cr4 - gt or eq if waking up from complete hypervisor state loss.
 	 */

 	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
 	stwcx.	r15,0,r14
 	bne-	lwarx_loop2
 	isync

 BEGIN_FTR_SECTION
 	lbz	r4,PACA_SUBCORE_SIBLING_MASK(r13)
 	and	r4,r4,r15
 	cmpwi	r4,0	/* Check if first in subcore */

 	or	r15,r15,r7		/* Set thread bit */
 	beq	first_thread_in_subcore
 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)

 	or	r15,r15,r7		/* Set thread bit */
 	beq	cr2,first_thread_in_core

 	/* Not first thread in core or subcore to wake up */
 	b	clear_lock

 first_thread_in_subcore:
 	/*
 	 * If waking up from sleep, subcore state is not lost. Hence
 	 * skip subcore state restore
 	 */
 	blt	cr4,subcore_state_restored

 	/* Restore per-subcore state */
 	ld      r4,_SDR1(r1)
 	mtspr   SPRN_SDR1,r4

 	ld      r4,_RPR(r1)
 	mtspr   SPRN_RPR,r4
 	ld	r4,_AMOR(r1)
 	mtspr	SPRN_AMOR,r4

 subcore_state_restored:
 	/*
 	 * Check if the thread is also the first thread in the core. If not,
 	 * skip to clear_lock.
 	 */
 	bne	cr2,clear_lock

 first_thread_in_core:

 	/*
 	 * First thread in the core waking up from any state which can cause
 	 * partial or complete hypervisor state loss. It needs to
 	 * call the fastsleep workaround code if the platform requires it.
 	 * Call it unconditionally here. The below branch instruction will
 	 * be patched out if the platform does not have fastsleep or does not
 	 * require the workaround. Patching will be performed during the
 	 * discovery of idle-states.
 	 */
 .global pnv_fastsleep_workaround_at_exit
 pnv_fastsleep_workaround_at_exit:
 	b	fastsleep_workaround_at_exit

 timebase_resync:
 	/*
 	 * Use cr3 which indicates that we are waking up with atleast partial
 	 * hypervisor state loss to determine if TIMEBASE RESYNC is needed.
 	 */
 	ble	cr3,clear_lock
 	/* Time base re-sync */
 	bl	opal_resync_timebase;
 	/*
 	 * If waking up from sleep, per core state is not lost, skip to
 	 * clear_lock.
 	 */
 	blt	cr4,clear_lock

 	/*
 	 * First thread in the core to wake up and its waking up with
 	 * complete hypervisor state loss. Restore per core hypervisor
 	 * state.
 	 */
 BEGIN_FTR_SECTION
 	ld	r4,_PTCR(r1)
 	mtspr	SPRN_PTCR,r4
 	ld	r4,_RPR(r1)
 	mtspr	SPRN_RPR,r4
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)

 	ld	r4,_TSCR(r1)
 	mtspr	SPRN_TSCR,r4
 	ld	r4,_WORC(r1)
 	mtspr	SPRN_WORC,r4

 clear_lock:
 	andi.	r15,r15,PNV_CORE_IDLE_THREAD_BITS
 	lwsync
 	stw	r15,0(r14)

 common_exit:
 	/*
 	 * Common to all threads.
 	 *
 	 * If waking up from sleep, hypervisor state is not lost. Hence
 	 * skip hypervisor state restore.
 	 */
 	blt	cr4,hypervisor_state_restored

 	/* Waking up from winkle */

 BEGIN_MMU_FTR_SECTION
 	b	no_segments
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
 	/* Restore SLB  from PACA */
 	ld	r8,PACA_SLBSHADOWPTR(r13)

 	.rept	SLB_NUM_BOLTED
 	li	r3, SLBSHADOW_SAVEAREA
 	LDX_BE	r5, r8, r3
 	addi	r3, r3, 8
 	LDX_BE	r6, r8, r3
 	andis.	r7,r5,SLB_ESID_V@h
 	beq	1f
 	slbmte	r6,r5
 1:	addi	r8,r8,16
 	.endr
 no_segments:

 	/* Restore per thread state */

 	ld	r4,_SPURR(r1)
 	mtspr	SPRN_SPURR,r4
 	ld	r4,_PURR(r1)
 	mtspr	SPRN_PURR,r4
 	ld	r4,_DSCR(r1)
 	mtspr	SPRN_DSCR,r4
 	ld	r4,_WORT(r1)
 	mtspr	SPRN_WORT,r4

 	/* Call cur_cpu_spec->cpu_restore() */
 	LOAD_REG_ADDR(r4, cur_cpu_spec)
 	ld	r4,0(r4)
 	ld	r12,CPU_SPEC_RESTORE(r4)
 #ifdef PPC64_ELF_ABI_v1
 	ld	r12,0(r12)
 #endif
 	mtctr	r12
 	bctrl

 hypervisor_state_restored:

 	mtspr	SPRN_SRR1,r16
 	mtlr	r17
 	blr	/* Return back to System Reset vector from where
 		   pnv_restore_hyp_resource was invoked */

 fastsleep_workaround_at_exit:
 	li	r3,1
 	li	r4,0
 	bl	opal_config_cpu_idle_state
 	b	timebase_resync

 /*
  * R3 here contains the value that will be returned to the caller
  * of power7_nap.
  */
 _GLOBAL(pnv_wakeup_loss)
 	ld	r1,PACAR1(r13)
 BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	REST_NVGPRS(r1)
 	REST_GPR(2, r1)
 	ld	r6,_CCR(r1)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
 	addi	r1,r1,INT_FRAME_SIZE
 	mtcr	r6
 	mtspr	SPRN_SRR1,r4
 	mtspr	SPRN_SRR0,r5
 	rfid

 /*
  * R3 here contains the value that will be returned to the caller
  * of power7_nap.
  */
 _GLOBAL(pnv_wakeup_noloss)
 	lbz	r0,PACA_NAPSTATELOST(r13)
 	cmpwi	r0,0
 	bne	pnv_wakeup_loss
 BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	ld	r1,PACAR1(r13)
 	ld	r6,_CCR(r1)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
 	addi	r1,r1,INT_FRAME_SIZE
 	mtcr	r6
 	mtspr	SPRN_SRR1,r4
 	mtspr	SPRN_SRR0,r5
 	rfid
	/*
	* This file contains idle entry/exit functions for POWER7,
	* POWER8 and POWER9 CPUs.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/

	#include <linux/threads.h>
	#include <asm/processor.h>
	#include <asm/page.h>
	#include <asm/cputable.h>
	#include <asm/thread_info.h>
	#include <asm/ppc_asm.h>
	#include <asm/asm-offsets.h>
	#include <asm/ppc-opcode.h>
	#include <asm/hw_irq.h>
	#include <asm/kvm_book3s_asm.h>
	#include <asm/opal.h>
	#include <asm/cpuidle.h>
	#include <asm/book3s/64/mmu-hash.h>
	#include <asm/mmu.h>

	#undef DEBUG

	/*
	* Use unused space in the interrupt stack to save and restore
	* registers for winkle support.
	*/
	#define _SDR1 GPR3
	#define _RPR GPR4
	#define _SPURR GPR5
	#define _PURR GPR6
	#define _TSCR GPR7
	#define _DSCR GPR8
	#define _AMOR GPR9
	#define _WORT GPR10
	#define _WORC GPR11
	#define _PTCR GPR12

	#define PSSCR_EC_ESL_MASK_SHIFTED (PSSCR_EC \| PSSCR_ESL) >> 16

	.text

	/*
	* Used by threads before entering deep idle states. Saves SPRs
	* in interrupt stack frame
	*/
	save_sprs_to_stack:
	/*
	* Note all register i.e per-core, per-subcore or per-thread is saved
	* here since any thread in the core might wake up first
	*/
	BEGIN_FTR_SECTION
	mfspr r3,SPRN_PTCR
	std r3,_PTCR(r1)
	/*
	* Note - SDR1 is dropped in Power ISA v3. Hence not restoring
	* SDR1 here
	*/
	FTR_SECTION_ELSE
	mfspr r3,SPRN_SDR1
	std r3,_SDR1(r1)
	ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
	mfspr r3,SPRN_RPR
	std r3,_RPR(r1)
	mfspr r3,SPRN_SPURR
	std r3,_SPURR(r1)
	mfspr r3,SPRN_PURR
	std r3,_PURR(r1)
	mfspr r3,SPRN_TSCR
	std r3,_TSCR(r1)
	mfspr r3,SPRN_DSCR
	std r3,_DSCR(r1)
	mfspr r3,SPRN_AMOR
	std r3,_AMOR(r1)
	mfspr r3,SPRN_WORT
	std r3,_WORT(r1)
	mfspr r3,SPRN_WORC
	std r3,_WORC(r1)

	blr

	/*
	* Used by threads when the lock bit of core_idle_state is set.
	* Threads will spin in HMT_LOW until the lock bit is cleared.
	* r14 - pointer to core_idle_state
	* r15 - used to load contents of core_idle_state
	* r9 - used as a temporary variable
	*/

	core_idle_lock_held:
	HMT_LOW
	3: lwz r15,0(r14)
	andi. r15,r15,PNV_CORE_IDLE_LOCK_BIT
	bne 3b
	HMT_MEDIUM
	lwarx r15,0,r14
	andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT
	bne core_idle_lock_held
	blr

	/*
	* Pass requested state in r3:
	* r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8
	* - Requested STOP state in POWER9
	*
	* To check IRQ_HAPPENED in r4
	* 0 - don't check
	* 1 - check
	*
	* Address to 'rfid' to in r5
	*/
	_GLOBAL(pnv_powersave_common)
	/* Use r3 to pass state nap/sleep/winkle */
	/* NAP is a state loss, we create a regs frame on the
	* stack, fill it up with the state we care about and
	* stick a pointer to it in PACAR1. We really only
	* need to save PC, some CR bits and the NV GPRs,
	* but for now an interrupt frame will do.
	*/
	mflr r0
	std r0,16(r1)
	stdu r1,-INT_FRAME_SIZE(r1)
	std r0,_LINK(r1)
	std r0,_NIP(r1)

	/* Hard disable interrupts */
	mfmsr r9
	rldicl r9,r9,48,1
	rotldi r9,r9,16
	mtmsrd r9,1 /* hard-disable interrupts */

	/* Check if something happened while soft-disabled */
	lbz r0,PACAIRQHAPPENED(r13)
	andi. r0,r0,~PACA_IRQ_HARD_DIS@l
	beq 1f
	cmpwi cr0,r4,0
	beq 1f
	addi r1,r1,INT_FRAME_SIZE
	ld r0,16(r1)
	li r3,0 /* Return 0 (no nap) */
	mtlr r0
	blr

	1: /* We mark irqs hard disabled as this is the state we'll
	* be in when returning and we need to tell arch_local_irq_restore()
	* about it
	*/
	li r0,PACA_IRQ_HARD_DIS
	stb r0,PACAIRQHAPPENED(r13)

	/* We haven't lost state ... yet */
	li r0,0
	stb r0,PACA_NAPSTATELOST(r13)

	/* Continue saving state */
	SAVE_GPR(2, r1)
	SAVE_NVGPRS(r1)
	mfcr r4
	std r4,_CCR(r1)
	std r9,_MSR(r1)
	std r1,PACAR1(r13)

	/*
	* Go to real mode to do the nap, as required by the architecture.
	* Also, we need to be in real mode before setting hwthread_state,
	* because as soon as we do that, another thread can switch
	* the MMU context to the guest.
	*/
	LOAD_REG_IMMEDIATE(r7, MSR_IDLE)
	li r6, MSR_RI
	andc r6, r9, r6
	mtmsrd r6, 1 /* clear RI before setting SRR0/1 */
	mtspr SPRN_SRR0, r5
	mtspr SPRN_SRR1, r7
	rfid

	.globl pnv_enter_arch207_idle_mode
	pnv_enter_arch207_idle_mode:
	#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
	/* Tell KVM we're entering idle */
	li r4,KVM_HWTHREAD_IN_IDLE
	/******************************************************/
	/* N O T E W E L L ! ! ! N O T E W E L L */
	/* The following store to HSTATE_HWTHREAD_STATE(r13) */
	/* MUST occur in real mode, i.e. with the MMU off, */
	/* and the MMU must stay off until we clear this flag */
	/* and test HSTATE_HWTHREAD_REQ(r13) in the system */
	/* reset interrupt vector in exceptions-64s.S. */
	/* The reason is that another thread can switch the */
	/* MMU to a guest context whenever this flag is set */
	/* to KVM_HWTHREAD_IN_IDLE, and if the MMU was on, */
	/* that would potentially cause this thread to start */
	/* executing instructions from guest memory in */
	/* hypervisor mode, leading to a host crash or data */
	/* corruption, or worse. */
	/******************************************************/
	stb r4,HSTATE_HWTHREAD_STATE(r13)
	#endif
	stb r3,PACA_THREAD_IDLE_STATE(r13)
	cmpwi cr3,r3,PNV_THREAD_SLEEP
	bge cr3,2f
	IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
	/* No return */
	2:
	/* Sleep or winkle */
	lbz r7,PACA_THREAD_MASK(r13)
	ld r14,PACA_CORE_IDLE_STATE_PTR(r13)
	lwarx_loop1:
	lwarx r15,0,r14

	andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT
	bnel core_idle_lock_held

	andc r15,r15,r7 /* Clear thread bit */

	andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS

	/*
	* If cr0 = 0, then current thread is the last thread of the core entering
	* sleep. Last thread needs to execute the hardware bug workaround code if
	* required by the platform.
	* Make the workaround call unconditionally here. The below branch call is
	* patched out when the idle states are discovered if the platform does not
	* require it.
	*/
	.global pnv_fastsleep_workaround_at_entry
	pnv_fastsleep_workaround_at_entry:
	beq fastsleep_workaround_at_entry

	stwcx. r15,0,r14
	bne- lwarx_loop1
	isync

	common_enter: /* common code for all the threads entering sleep or winkle */
	bgt cr3,enter_winkle
	IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)

	fastsleep_workaround_at_entry:
	ori r15,r15,PNV_CORE_IDLE_LOCK_BIT
	stwcx. r15,0,r14
	bne- lwarx_loop1
	isync

	/* Fast sleep workaround */
	li r3,1
	li r4,1
	bl opal_config_cpu_idle_state

	/* Clear Lock bit */
	li r0,0
	lwsync
	stw r0,0(r14)
	b common_enter

	enter_winkle:
	bl save_sprs_to_stack

	IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)

	/*
	* r3 - PSSCR value corresponding to the requested stop state.
	*/
	power_enter_stop:
	#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
	/* Tell KVM we're entering idle */
	li r4,KVM_HWTHREAD_IN_IDLE
	/* DO THIS IN REAL MODE! See comment above. */
	stb r4,HSTATE_HWTHREAD_STATE(r13)
	#endif
	/*
	* Check if we are executing the lite variant with ESL=EC=0
	*/
	andis. r4,r3,PSSCR_EC_ESL_MASK_SHIFTED
	clrldi r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */
	bne .Lhandle_esl_ec_set
	IDLE_STATE_ENTER_SEQ(PPC_STOP)
	li r3,0 /* Since we didn't lose state, return 0 */
	b pnv_wakeup_noloss

	.Lhandle_esl_ec_set:
	/*
	* Check if the requested state is a deep idle state.
	*/
	LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
	ld r4,ADDROFF(pnv_first_deep_stop_state)(r5)
	cmpd r3,r4
	bge .Lhandle_deep_stop
	IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)
	.Lhandle_deep_stop:
	/*
	* Entering deep idle state.
	* Clear thread bit in PACA_CORE_IDLE_STATE, save SPRs to
	* stack and enter stop
	*/
	lbz r7,PACA_THREAD_MASK(r13)
	ld r14,PACA_CORE_IDLE_STATE_PTR(r13)

	lwarx_loop_stop:
	lwarx r15,0,r14
	andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT
	bnel core_idle_lock_held
	andc r15,r15,r7 /* Clear thread bit */

	stwcx. r15,0,r14
	bne- lwarx_loop_stop
	isync

	bl save_sprs_to_stack

	IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)

	_GLOBAL(power7_idle)
	/* Now check if user or arch enabled NAP mode */
	LOAD_REG_ADDRBASE(r3,powersave_nap)
	lwz r4,ADDROFF(powersave_nap)(r3)
	cmpwi 0,r4,0
	beqlr
	li r3, 1
	/* fall through */

	_GLOBAL(power7_nap)
	mr r4,r3
	li r3,PNV_THREAD_NAP
	LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
	b pnv_powersave_common
	/* No return */

	_GLOBAL(power7_sleep)
	li r3,PNV_THREAD_SLEEP
	li r4,1
	LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
	b pnv_powersave_common
	/* No return */

	_GLOBAL(power7_winkle)
	li r3,PNV_THREAD_WINKLE
	li r4,1
	LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
	b pnv_powersave_common
	/* No return */

	#define CHECK_HMI_INTERRUPT \
	mfspr r0,SPRN_SRR1; \
	BEGIN_FTR_SECTION_NESTED(66); \
	rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \
	FTR_SECTION_ELSE_NESTED(66); \
	rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \
	ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
	cmpwi r0,0xa; /* Hypervisor maintenance ? */ \
	bne 20f; \
	/* Invoke opal call to handle hmi */ \
	ld r2,PACATOC(r13); \
	ld r1,PACAR1(r13); \
	std r3,ORIG_GPR3(r1); /* Save original r3 */ \
	li r3,0; /* NULL argument */ \
	bl hmi_exception_realmode; \
	nop; \
	ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
	20: nop;

	/*
	* r3 - The PSSCR value corresponding to the stop state.
	* r4 - The PSSCR mask corrresonding to the stop state.
	*/
	_GLOBAL(power9_idle_stop)
	mfspr r5,SPRN_PSSCR
	andc r5,r5,r4
	or r3,r3,r5
	mtspr SPRN_PSSCR,r3
	LOAD_REG_ADDR(r5,power_enter_stop)
	li r4,1
	b pnv_powersave_common
	/* No return */
	/*
	* Called from reset vector. Check whether we have woken up with
	* hypervisor state loss. If yes, restore hypervisor state and return
	* back to reset vector.
	*
	* r13 - Contents of HSPRG0
	* cr3 - set to gt if waking up with partial/complete hypervisor state loss
	*/
	_GLOBAL(pnv_restore_hyp_resource)
	BEGIN_FTR_SECTION
	ld r2,PACATOC(r13);
	/*
	* POWER ISA 3. Use PSSCR to determine if we
	* are waking up from deep idle state
	*/
	LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
	ld r4,ADDROFF(pnv_first_deep_stop_state)(r5)

	mfspr r5,SPRN_PSSCR
	/*
	* 0-3 bits correspond to Power-Saving Level Status
	* which indicates the idle state we are waking up from
	*/
	rldicl r5,r5,4,60
	cmpd cr4,r5,r4
	bge cr4,pnv_wakeup_tb_loss
	/*
	* Waking up without hypervisor state loss. Return to
	* reset vector
	*/
	blr

	END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)

	/*
	* POWER ISA 2.07 or less.
	* Check if last bit of HSPGR0 is set. This indicates whether we are
	* waking up from winkle.
	*/
	clrldi r5,r13,63
	clrrdi r13,r13,1

	/* Now that we are sure r13 is corrected, load TOC */
	ld r2,PACATOC(r13);
	cmpwi cr4,r5,1
	mtspr SPRN_HSPRG0,r13

	lbz r0,PACA_THREAD_IDLE_STATE(r13)
	cmpwi cr2,r0,PNV_THREAD_NAP
	bgt cr2,pnv_wakeup_tb_loss /* Either sleep or Winkle */

	/*
	* We fall through here if PACA_THREAD_IDLE_STATE shows we are waking
	* up from nap. At this stage CR3 shouldn't contains 'gt' since that
	* indicates we are waking with hypervisor state loss from nap.
	*/
	bgt cr3,.

	blr /* Return back to System Reset vector from where
	pnv_restore_hyp_resource was invoked */

	/*
	* Called if waking up from idle state which can cause either partial or
	* complete hyp state loss.
	* In POWER8, called if waking up from fastsleep or winkle
	* In POWER9, called if waking up from stop state >= pnv_first_deep_stop_state
	*
	* r13 - PACA
	* cr3 - gt if waking up with partial/complete hypervisor state loss
	* cr4 - gt or eq if waking up from complete hypervisor state loss.
	*/
	_GLOBAL(pnv_wakeup_tb_loss)
	ld r1,PACAR1(r13)
	/*
	* Before entering any idle state, the NVGPRs are saved in the stack.
	* If there was a state loss, or PACA_NAPSTATELOST was set, then the
	* NVGPRs are restored. If we are here, it is likely that state is lost,
	* but not guaranteed -- neither ISA207 nor ISA300 tests to reach
	* here are the same as the test to restore NVGPRS:
	* PACA_THREAD_IDLE_STATE test for ISA207, PSSCR test for ISA300,
	* and SRR1 test for restoring NVGPRs.
	*
	* We are about to clobber NVGPRs now, so set NAPSTATELOST to
	* guarantee they will always be restored. This might be tightened
	* with careful reading of specs (particularly for ISA300) but this
	* is already a slow wakeup path and it's simpler to be safe.
	*/
	li r0,1
	stb r0,PACA_NAPSTATELOST(r13)

	/*
	*
	* Save SRR1 and LR in NVGPRs as they might be clobbered in
	* opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required
	* to determine the wakeup reason if we branch to kvm_start_guest. LR
	* is required to return back to reset vector after hypervisor state
	* restore is complete.
	*/
	mflr r17
	mfspr r16,SPRN_SRR1
	BEGIN_FTR_SECTION
	CHECK_HMI_INTERRUPT
	END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)

	lbz r7,PACA_THREAD_MASK(r13)
	ld r14,PACA_CORE_IDLE_STATE_PTR(r13)
	lwarx_loop2:
	lwarx r15,0,r14
	andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT
	/*
	* Lock bit is set in one of the 2 cases-
	* a. In the sleep/winkle enter path, the last thread is executing
	* fastsleep workaround code.
	* b. In the wake up path, another thread is executing fastsleep
	* workaround undo code or resyncing timebase or restoring context
	* In either case loop until the lock bit is cleared.
	*/
	bnel core_idle_lock_held

	cmpwi cr2,r15,0

	/*
	* At this stage
	* cr2 - eq if first thread to wakeup in core
	* cr3- gt if waking up with partial/complete hypervisor state loss
	* cr4 - gt or eq if waking up from complete hypervisor state loss.
	*/

	ori r15,r15,PNV_CORE_IDLE_LOCK_BIT
	stwcx. r15,0,r14
	bne- lwarx_loop2
	isync

	BEGIN_FTR_SECTION
	lbz r4,PACA_SUBCORE_SIBLING_MASK(r13)
	and r4,r4,r15
	cmpwi r4,0 /* Check if first in subcore */

	or r15,r15,r7 /* Set thread bit */
	beq first_thread_in_subcore
	END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)

	or r15,r15,r7 /* Set thread bit */
	beq cr2,first_thread_in_core

	/* Not first thread in core or subcore to wake up */
	b clear_lock

	first_thread_in_subcore:
	/*
	* If waking up from sleep, subcore state is not lost. Hence
	* skip subcore state restore
	*/
	blt cr4,subcore_state_restored

	/* Restore per-subcore state */
	ld r4,_SDR1(r1)
	mtspr SPRN_SDR1,r4

	ld r4,_RPR(r1)
	mtspr SPRN_RPR,r4
	ld r4,_AMOR(r1)
	mtspr SPRN_AMOR,r4

	subcore_state_restored:
	/*
	* Check if the thread is also the first thread in the core. If not,
	* skip to clear_lock.
	*/
	bne cr2,clear_lock

	first_thread_in_core:

	/*
	* First thread in the core waking up from any state which can cause
	* partial or complete hypervisor state loss. It needs to
	* call the fastsleep workaround code if the platform requires it.
	* Call it unconditionally here. The below branch instruction will
	* be patched out if the platform does not have fastsleep or does not
	* require the workaround. Patching will be performed during the
	* discovery of idle-states.
	*/
	.global pnv_fastsleep_workaround_at_exit
	pnv_fastsleep_workaround_at_exit:
	b fastsleep_workaround_at_exit

	timebase_resync:
	/*
	* Use cr3 which indicates that we are waking up with atleast partial
	* hypervisor state loss to determine if TIMEBASE RESYNC is needed.
	*/
	ble cr3,clear_lock
	/* Time base re-sync */
	bl opal_resync_timebase;
	/*
	* If waking up from sleep, per core state is not lost, skip to
	* clear_lock.
	*/
	blt cr4,clear_lock

	/*
	* First thread in the core to wake up and its waking up with
	* complete hypervisor state loss. Restore per core hypervisor
	* state.
	*/
	BEGIN_FTR_SECTION
	ld r4,_PTCR(r1)
	mtspr SPRN_PTCR,r4
	ld r4,_RPR(r1)
	mtspr SPRN_RPR,r4
	END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)

	ld r4,_TSCR(r1)
	mtspr SPRN_TSCR,r4
	ld r4,_WORC(r1)
	mtspr SPRN_WORC,r4

	clear_lock:
	andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS
	lwsync
	stw r15,0(r14)

	common_exit:
	/*
	* Common to all threads.
	*
	* If waking up from sleep, hypervisor state is not lost. Hence
	* skip hypervisor state restore.
	*/
	blt cr4,hypervisor_state_restored

	/* Waking up from winkle */

	BEGIN_MMU_FTR_SECTION
	b no_segments
	END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
	/* Restore SLB from PACA */
	ld r8,PACA_SLBSHADOWPTR(r13)

	.rept SLB_NUM_BOLTED
	li r3, SLBSHADOW_SAVEAREA
	LDX_BE r5, r8, r3
	addi r3, r3, 8
	LDX_BE r6, r8, r3
	andis. r7,r5,SLB_ESID_V@h
	beq 1f
	slbmte r6,r5
	1: addi r8,r8,16
	.endr
	no_segments:

	/* Restore per thread state */

	ld r4,_SPURR(r1)
	mtspr SPRN_SPURR,r4
	ld r4,_PURR(r1)
	mtspr SPRN_PURR,r4
	ld r4,_DSCR(r1)
	mtspr SPRN_DSCR,r4
	ld r4,_WORT(r1)
	mtspr SPRN_WORT,r4

	/* Call cur_cpu_spec->cpu_restore() */
	LOAD_REG_ADDR(r4, cur_cpu_spec)
	ld r4,0(r4)
	ld r12,CPU_SPEC_RESTORE(r4)
	#ifdef PPC64_ELF_ABI_v1
	ld r12,0(r12)
	#endif
	mtctr r12
	bctrl

	hypervisor_state_restored:

	mtspr SPRN_SRR1,r16
	mtlr r17
	blr /* Return back to System Reset vector from where
	pnv_restore_hyp_resource was invoked */

	fastsleep_workaround_at_exit:
	li r3,1
	li r4,0
	bl opal_config_cpu_idle_state
	b timebase_resync

	/*
	* R3 here contains the value that will be returned to the caller
	* of power7_nap.
	*/
	_GLOBAL(pnv_wakeup_loss)
	ld r1,PACAR1(r13)
	BEGIN_FTR_SECTION
	CHECK_HMI_INTERRUPT
	END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
	REST_NVGPRS(r1)
	REST_GPR(2, r1)
	ld r6,_CCR(r1)
	ld r4,_MSR(r1)
	ld r5,_NIP(r1)
	addi r1,r1,INT_FRAME_SIZE
	mtcr r6
	mtspr SPRN_SRR1,r4
	mtspr SPRN_SRR0,r5
	rfid

	/*
	* R3 here contains the value that will be returned to the caller
	* of power7_nap.
	*/
	_GLOBAL(pnv_wakeup_noloss)
	lbz r0,PACA_NAPSTATELOST(r13)
	cmpwi r0,0
	bne pnv_wakeup_loss
	BEGIN_FTR_SECTION
	CHECK_HMI_INTERRUPT
	END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
	ld r1,PACAR1(r13)
	ld r6,_CCR(r1)
	ld r4,_MSR(r1)
	ld r5,_NIP(r1)
	addi r1,r1,INT_FRAME_SIZE
	mtcr r6
	mtspr SPRN_SRR1,r4
	mtspr SPRN_SRR0,r5
	rfid