| /* pcnet32.c: An AMD PCnet32 ethernet driver for linux. */ |
| /* |
| * Copyright 1996-1999 Thomas Bogendoerfer |
| * |
| * Derived from the lance driver written 1993,1994,1995 by Donald Becker. |
| * |
| * Copyright 1993 United States Government as represented by the |
| * Director, National Security Agency. |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License, incorporated herein by reference. |
| * |
| * This driver is for PCnet32 and PCnetPCI based ethercards |
| */ |
| /************************************************************************** |
| * 23 Oct, 2000. |
| * Fixed a few bugs, related to running the controller in 32bit mode. |
| * |
| * Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. |
| * |
| *************************************************************************/ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define DRV_NAME "pcnet32" |
| #define DRV_VERSION "1.35" |
| #define DRV_RELDATE "21.Apr.2008" |
| #define PFX DRV_NAME ": " |
| |
| static const char *const version = |
| DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " tsbogend@alpha.franken.de\n"; |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/crc32.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_ether.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/moduleparam.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/dma.h> |
| #include <asm/irq.h> |
| |
| /* |
| * PCI device identifiers for "new style" Linux PCI Device Drivers |
| */ |
| static const struct pci_device_id pcnet32_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME), }, |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE), }, |
| |
| /* |
| * Adapters that were sold with IBM's RS/6000 or pSeries hardware have |
| * the incorrect vendor id. |
| */ |
| { PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE), |
| .class = (PCI_CLASS_NETWORK_ETHERNET << 8), .class_mask = 0xffff00, }, |
| |
| { } /* terminate list */ |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, pcnet32_pci_tbl); |
| |
| static int cards_found; |
| |
| /* |
| * VLB I/O addresses |
| */ |
| static unsigned int pcnet32_portlist[] = |
| { 0x300, 0x320, 0x340, 0x360, 0 }; |
| |
| static int pcnet32_debug; |
| static int tx_start = 1; /* Mapping -- 0:20, 1:64, 2:128, 3:~220 (depends on chip vers) */ |
| static int pcnet32vlb; /* check for VLB cards ? */ |
| |
| static struct net_device *pcnet32_dev; |
| |
| static int max_interrupt_work = 2; |
| static int rx_copybreak = 200; |
| |
| #define PCNET32_PORT_AUI 0x00 |
| #define PCNET32_PORT_10BT 0x01 |
| #define PCNET32_PORT_GPSI 0x02 |
| #define PCNET32_PORT_MII 0x03 |
| |
| #define PCNET32_PORT_PORTSEL 0x03 |
| #define PCNET32_PORT_ASEL 0x04 |
| #define PCNET32_PORT_100 0x40 |
| #define PCNET32_PORT_FD 0x80 |
| |
| #define PCNET32_DMA_MASK 0xffffffff |
| |
| #define PCNET32_WATCHDOG_TIMEOUT (jiffies + (2 * HZ)) |
| #define PCNET32_BLINK_TIMEOUT (jiffies + (HZ/4)) |
| |
| /* |
| * table to translate option values from tulip |
| * to internal options |
| */ |
| static const unsigned char options_mapping[] = { |
| PCNET32_PORT_ASEL, /* 0 Auto-select */ |
| PCNET32_PORT_AUI, /* 1 BNC/AUI */ |
| PCNET32_PORT_AUI, /* 2 AUI/BNC */ |
| PCNET32_PORT_ASEL, /* 3 not supported */ |
| PCNET32_PORT_10BT | PCNET32_PORT_FD, /* 4 10baseT-FD */ |
| PCNET32_PORT_ASEL, /* 5 not supported */ |
| PCNET32_PORT_ASEL, /* 6 not supported */ |
| PCNET32_PORT_ASEL, /* 7 not supported */ |
| PCNET32_PORT_ASEL, /* 8 not supported */ |
| PCNET32_PORT_MII, /* 9 MII 10baseT */ |
| PCNET32_PORT_MII | PCNET32_PORT_FD, /* 10 MII 10baseT-FD */ |
| PCNET32_PORT_MII, /* 11 MII (autosel) */ |
| PCNET32_PORT_10BT, /* 12 10BaseT */ |
| PCNET32_PORT_MII | PCNET32_PORT_100, /* 13 MII 100BaseTx */ |
| /* 14 MII 100BaseTx-FD */ |
| PCNET32_PORT_MII | PCNET32_PORT_100 | PCNET32_PORT_FD, |
| PCNET32_PORT_ASEL /* 15 not supported */ |
| }; |
| |
| static const char pcnet32_gstrings_test[][ETH_GSTRING_LEN] = { |
| "Loopback test (offline)" |
| }; |
| |
| #define PCNET32_TEST_LEN ARRAY_SIZE(pcnet32_gstrings_test) |
| |
| #define PCNET32_NUM_REGS 136 |
| |
| #define MAX_UNITS 8 /* More are supported, limit only on options */ |
| static int options[MAX_UNITS]; |
| static int full_duplex[MAX_UNITS]; |
| static int homepna[MAX_UNITS]; |
| |
| /* |
| * Theory of Operation |
| * |
| * This driver uses the same software structure as the normal lance |
| * driver. So look for a verbose description in lance.c. The differences |
| * to the normal lance driver is the use of the 32bit mode of PCnet32 |
| * and PCnetPCI chips. Because these chips are 32bit chips, there is no |
| * 16MB limitation and we don't need bounce buffers. |
| */ |
| |
| /* |
| * Set the number of Tx and Rx buffers, using Log_2(# buffers). |
| * Reasonable default values are 4 Tx buffers, and 16 Rx buffers. |
| * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4). |
| */ |
| #ifndef PCNET32_LOG_TX_BUFFERS |
| #define PCNET32_LOG_TX_BUFFERS 4 |
| #define PCNET32_LOG_RX_BUFFERS 5 |
| #define PCNET32_LOG_MAX_TX_BUFFERS 9 /* 2^9 == 512 */ |
| #define PCNET32_LOG_MAX_RX_BUFFERS 9 |
| #endif |
| |
| #define TX_RING_SIZE (1 << (PCNET32_LOG_TX_BUFFERS)) |
| #define TX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_TX_BUFFERS)) |
| |
| #define RX_RING_SIZE (1 << (PCNET32_LOG_RX_BUFFERS)) |
| #define RX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_RX_BUFFERS)) |
| |
| #define PKT_BUF_SKB 1544 |
| /* actual buffer length after being aligned */ |
| #define PKT_BUF_SIZE (PKT_BUF_SKB - NET_IP_ALIGN) |
| /* chip wants twos complement of the (aligned) buffer length */ |
| #define NEG_BUF_SIZE (NET_IP_ALIGN - PKT_BUF_SKB) |
| |
| /* Offsets from base I/O address. */ |
| #define PCNET32_WIO_RDP 0x10 |
| #define PCNET32_WIO_RAP 0x12 |
| #define PCNET32_WIO_RESET 0x14 |
| #define PCNET32_WIO_BDP 0x16 |
| |
| #define PCNET32_DWIO_RDP 0x10 |
| #define PCNET32_DWIO_RAP 0x14 |
| #define PCNET32_DWIO_RESET 0x18 |
| #define PCNET32_DWIO_BDP 0x1C |
| |
| #define PCNET32_TOTAL_SIZE 0x20 |
| |
| #define CSR0 0 |
| #define CSR0_INIT 0x1 |
| #define CSR0_START 0x2 |
| #define CSR0_STOP 0x4 |
| #define CSR0_TXPOLL 0x8 |
| #define CSR0_INTEN 0x40 |
| #define CSR0_IDON 0x0100 |
| #define CSR0_NORMAL (CSR0_START | CSR0_INTEN) |
| #define PCNET32_INIT_LOW 1 |
| #define PCNET32_INIT_HIGH 2 |
| #define CSR3 3 |
| #define CSR4 4 |
| #define CSR5 5 |
| #define CSR5_SUSPEND 0x0001 |
| #define CSR15 15 |
| #define PCNET32_MC_FILTER 8 |
| |
| #define PCNET32_79C970A 0x2621 |
| |
| /* The PCNET32 Rx and Tx ring descriptors. */ |
| struct pcnet32_rx_head { |
| __le32 base; |
| __le16 buf_length; /* two`s complement of length */ |
| __le16 status; |
| __le32 msg_length; |
| __le32 reserved; |
| }; |
| |
| struct pcnet32_tx_head { |
| __le32 base; |
| __le16 length; /* two`s complement of length */ |
| __le16 status; |
| __le32 misc; |
| __le32 reserved; |
| }; |
| |
| /* The PCNET32 32-Bit initialization block, described in databook. */ |
| struct pcnet32_init_block { |
| __le16 mode; |
| __le16 tlen_rlen; |
| u8 phys_addr[6]; |
| __le16 reserved; |
| __le32 filter[2]; |
| /* Receive and transmit ring base, along with extra bits. */ |
| __le32 rx_ring; |
| __le32 tx_ring; |
| }; |
| |
| /* PCnet32 access functions */ |
| struct pcnet32_access { |
| u16 (*read_csr) (unsigned long, int); |
| void (*write_csr) (unsigned long, int, u16); |
| u16 (*read_bcr) (unsigned long, int); |
| void (*write_bcr) (unsigned long, int, u16); |
| u16 (*read_rap) (unsigned long); |
| void (*write_rap) (unsigned long, u16); |
| void (*reset) (unsigned long); |
| }; |
| |
| /* |
| * The first field of pcnet32_private is read by the ethernet device |
| * so the structure should be allocated using pci_alloc_consistent(). |
| */ |
| struct pcnet32_private { |
| struct pcnet32_init_block *init_block; |
| /* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */ |
| struct pcnet32_rx_head *rx_ring; |
| struct pcnet32_tx_head *tx_ring; |
| dma_addr_t init_dma_addr;/* DMA address of beginning of the init block, |
| returned by pci_alloc_consistent */ |
| struct pci_dev *pci_dev; |
| const char *name; |
| /* The saved address of a sent-in-place packet/buffer, for skfree(). */ |
| struct sk_buff **tx_skbuff; |
| struct sk_buff **rx_skbuff; |
| dma_addr_t *tx_dma_addr; |
| dma_addr_t *rx_dma_addr; |
| const struct pcnet32_access *a; |
| spinlock_t lock; /* Guard lock */ |
| unsigned int cur_rx, cur_tx; /* The next free ring entry */ |
| unsigned int rx_ring_size; /* current rx ring size */ |
| unsigned int tx_ring_size; /* current tx ring size */ |
| unsigned int rx_mod_mask; /* rx ring modular mask */ |
| unsigned int tx_mod_mask; /* tx ring modular mask */ |
| unsigned short rx_len_bits; |
| unsigned short tx_len_bits; |
| dma_addr_t rx_ring_dma_addr; |
| dma_addr_t tx_ring_dma_addr; |
| unsigned int dirty_rx, /* ring entries to be freed. */ |
| dirty_tx; |
| |
| struct net_device *dev; |
| struct napi_struct napi; |
| char tx_full; |
| char phycount; /* number of phys found */ |
| int options; |
| unsigned int shared_irq:1, /* shared irq possible */ |
| dxsuflo:1, /* disable transmit stop on uflo */ |
| mii:1, /* mii port available */ |
| autoneg:1, /* autoneg enabled */ |
| port_tp:1, /* port set to TP */ |
| fdx:1; /* full duplex enabled */ |
| struct net_device *next; |
| struct mii_if_info mii_if; |
| struct timer_list watchdog_timer; |
| u32 msg_enable; /* debug message level */ |
| |
| /* each bit indicates an available PHY */ |
| u32 phymask; |
| unsigned short chip_version; /* which variant this is */ |
| |
| /* saved registers during ethtool blink */ |
| u16 save_regs[4]; |
| }; |
| |
| static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *); |
| static int pcnet32_probe1(unsigned long, int, struct pci_dev *); |
| static int pcnet32_open(struct net_device *); |
| static int pcnet32_init_ring(struct net_device *); |
| static netdev_tx_t pcnet32_start_xmit(struct sk_buff *, |
| struct net_device *); |
| static void pcnet32_tx_timeout(struct net_device *dev); |
| static irqreturn_t pcnet32_interrupt(int, void *); |
| static int pcnet32_close(struct net_device *); |
| static struct net_device_stats *pcnet32_get_stats(struct net_device *); |
| static void pcnet32_load_multicast(struct net_device *dev); |
| static void pcnet32_set_multicast_list(struct net_device *); |
| static int pcnet32_ioctl(struct net_device *, struct ifreq *, int); |
| static void pcnet32_watchdog(struct net_device *); |
| static int mdio_read(struct net_device *dev, int phy_id, int reg_num); |
| static void mdio_write(struct net_device *dev, int phy_id, int reg_num, |
| int val); |
| static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits); |
| static void pcnet32_ethtool_test(struct net_device *dev, |
| struct ethtool_test *eth_test, u64 * data); |
| static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1); |
| static int pcnet32_get_regs_len(struct net_device *dev); |
| static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, |
| void *ptr); |
| static void pcnet32_purge_tx_ring(struct net_device *dev); |
| static int pcnet32_alloc_ring(struct net_device *dev, const char *name); |
| static void pcnet32_free_ring(struct net_device *dev); |
| static void pcnet32_check_media(struct net_device *dev, int verbose); |
| |
| static u16 pcnet32_wio_read_csr(unsigned long addr, int index) |
| { |
| outw(index, addr + PCNET32_WIO_RAP); |
| return inw(addr + PCNET32_WIO_RDP); |
| } |
| |
| static void pcnet32_wio_write_csr(unsigned long addr, int index, u16 val) |
| { |
| outw(index, addr + PCNET32_WIO_RAP); |
| outw(val, addr + PCNET32_WIO_RDP); |
| } |
| |
| static u16 pcnet32_wio_read_bcr(unsigned long addr, int index) |
| { |
| outw(index, addr + PCNET32_WIO_RAP); |
| return inw(addr + PCNET32_WIO_BDP); |
| } |
| |
| static void pcnet32_wio_write_bcr(unsigned long addr, int index, u16 val) |
| { |
| outw(index, addr + PCNET32_WIO_RAP); |
| outw(val, addr + PCNET32_WIO_BDP); |
| } |
| |
| static u16 pcnet32_wio_read_rap(unsigned long addr) |
| { |
| return inw(addr + PCNET32_WIO_RAP); |
| } |
| |
| static void pcnet32_wio_write_rap(unsigned long addr, u16 val) |
| { |
| outw(val, addr + PCNET32_WIO_RAP); |
| } |
| |
| static void pcnet32_wio_reset(unsigned long addr) |
| { |
| inw(addr + PCNET32_WIO_RESET); |
| } |
| |
| static int pcnet32_wio_check(unsigned long addr) |
| { |
| outw(88, addr + PCNET32_WIO_RAP); |
| return inw(addr + PCNET32_WIO_RAP) == 88; |
| } |
| |
| static const struct pcnet32_access pcnet32_wio = { |
| .read_csr = pcnet32_wio_read_csr, |
| .write_csr = pcnet32_wio_write_csr, |
| .read_bcr = pcnet32_wio_read_bcr, |
| .write_bcr = pcnet32_wio_write_bcr, |
| .read_rap = pcnet32_wio_read_rap, |
| .write_rap = pcnet32_wio_write_rap, |
| .reset = pcnet32_wio_reset |
| }; |
| |
| static u16 pcnet32_dwio_read_csr(unsigned long addr, int index) |
| { |
| outl(index, addr + PCNET32_DWIO_RAP); |
| return inl(addr + PCNET32_DWIO_RDP) & 0xffff; |
| } |
| |
| static void pcnet32_dwio_write_csr(unsigned long addr, int index, u16 val) |
| { |
| outl(index, addr + PCNET32_DWIO_RAP); |
| outl(val, addr + PCNET32_DWIO_RDP); |
| } |
| |
| static u16 pcnet32_dwio_read_bcr(unsigned long addr, int index) |
| { |
| outl(index, addr + PCNET32_DWIO_RAP); |
| return inl(addr + PCNET32_DWIO_BDP) & 0xffff; |
| } |
| |
| static void pcnet32_dwio_write_bcr(unsigned long addr, int index, u16 val) |
| { |
| outl(index, addr + PCNET32_DWIO_RAP); |
| outl(val, addr + PCNET32_DWIO_BDP); |
| } |
| |
| static u16 pcnet32_dwio_read_rap(unsigned long addr) |
| { |
| return inl(addr + PCNET32_DWIO_RAP) & 0xffff; |
| } |
| |
| static void pcnet32_dwio_write_rap(unsigned long addr, u16 val) |
| { |
| outl(val, addr + PCNET32_DWIO_RAP); |
| } |
| |
| static void pcnet32_dwio_reset(unsigned long addr) |
| { |
| inl(addr + PCNET32_DWIO_RESET); |
| } |
| |
| static int pcnet32_dwio_check(unsigned long addr) |
| { |
| outl(88, addr + PCNET32_DWIO_RAP); |
| return (inl(addr + PCNET32_DWIO_RAP) & 0xffff) == 88; |
| } |
| |
| static const struct pcnet32_access pcnet32_dwio = { |
| .read_csr = pcnet32_dwio_read_csr, |
| .write_csr = pcnet32_dwio_write_csr, |
| .read_bcr = pcnet32_dwio_read_bcr, |
| .write_bcr = pcnet32_dwio_write_bcr, |
| .read_rap = pcnet32_dwio_read_rap, |
| .write_rap = pcnet32_dwio_write_rap, |
| .reset = pcnet32_dwio_reset |
| }; |
| |
| static void pcnet32_netif_stop(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| |
| netif_trans_update(dev); /* prevent tx timeout */ |
| napi_disable(&lp->napi); |
| netif_tx_disable(dev); |
| } |
| |
| static void pcnet32_netif_start(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| ulong ioaddr = dev->base_addr; |
| u16 val; |
| |
| netif_wake_queue(dev); |
| val = lp->a->read_csr(ioaddr, CSR3); |
| val &= 0x00ff; |
| lp->a->write_csr(ioaddr, CSR3, val); |
| napi_enable(&lp->napi); |
| } |
| |
| /* |
| * Allocate space for the new sized tx ring. |
| * Free old resources |
| * Save new resources. |
| * Any failure keeps old resources. |
| * Must be called with lp->lock held. |
| */ |
| static void pcnet32_realloc_tx_ring(struct net_device *dev, |
| struct pcnet32_private *lp, |
| unsigned int size) |
| { |
| dma_addr_t new_ring_dma_addr; |
| dma_addr_t *new_dma_addr_list; |
| struct pcnet32_tx_head *new_tx_ring; |
| struct sk_buff **new_skb_list; |
| unsigned int entries = BIT(size); |
| |
| pcnet32_purge_tx_ring(dev); |
| |
| new_tx_ring = |
| pci_zalloc_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_tx_head) * entries, |
| &new_ring_dma_addr); |
| if (new_tx_ring == NULL) |
| return; |
| |
| new_dma_addr_list = kcalloc(entries, sizeof(dma_addr_t), GFP_ATOMIC); |
| if (!new_dma_addr_list) |
| goto free_new_tx_ring; |
| |
| new_skb_list = kcalloc(entries, sizeof(struct sk_buff *), GFP_ATOMIC); |
| if (!new_skb_list) |
| goto free_new_lists; |
| |
| kfree(lp->tx_skbuff); |
| kfree(lp->tx_dma_addr); |
| pci_free_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, |
| lp->tx_ring, lp->tx_ring_dma_addr); |
| |
| lp->tx_ring_size = entries; |
| lp->tx_mod_mask = lp->tx_ring_size - 1; |
| lp->tx_len_bits = (size << 12); |
| lp->tx_ring = new_tx_ring; |
| lp->tx_ring_dma_addr = new_ring_dma_addr; |
| lp->tx_dma_addr = new_dma_addr_list; |
| lp->tx_skbuff = new_skb_list; |
| return; |
| |
| free_new_lists: |
| kfree(new_dma_addr_list); |
| free_new_tx_ring: |
| pci_free_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_tx_head) * entries, |
| new_tx_ring, |
| new_ring_dma_addr); |
| } |
| |
| /* |
| * Allocate space for the new sized rx ring. |
| * Re-use old receive buffers. |
| * alloc extra buffers |
| * free unneeded buffers |
| * free unneeded buffers |
| * Save new resources. |
| * Any failure keeps old resources. |
| * Must be called with lp->lock held. |
| */ |
| static void pcnet32_realloc_rx_ring(struct net_device *dev, |
| struct pcnet32_private *lp, |
| unsigned int size) |
| { |
| dma_addr_t new_ring_dma_addr; |
| dma_addr_t *new_dma_addr_list; |
| struct pcnet32_rx_head *new_rx_ring; |
| struct sk_buff **new_skb_list; |
| int new, overlap; |
| unsigned int entries = BIT(size); |
| |
| new_rx_ring = |
| pci_zalloc_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_rx_head) * entries, |
| &new_ring_dma_addr); |
| if (new_rx_ring == NULL) |
| return; |
| |
| new_dma_addr_list = kcalloc(entries, sizeof(dma_addr_t), GFP_ATOMIC); |
| if (!new_dma_addr_list) |
| goto free_new_rx_ring; |
| |
| new_skb_list = kcalloc(entries, sizeof(struct sk_buff *), GFP_ATOMIC); |
| if (!new_skb_list) |
| goto free_new_lists; |
| |
| /* first copy the current receive buffers */ |
| overlap = min(entries, lp->rx_ring_size); |
| for (new = 0; new < overlap; new++) { |
| new_rx_ring[new] = lp->rx_ring[new]; |
| new_dma_addr_list[new] = lp->rx_dma_addr[new]; |
| new_skb_list[new] = lp->rx_skbuff[new]; |
| } |
| /* now allocate any new buffers needed */ |
| for (; new < entries; new++) { |
| struct sk_buff *rx_skbuff; |
| new_skb_list[new] = netdev_alloc_skb(dev, PKT_BUF_SKB); |
| rx_skbuff = new_skb_list[new]; |
| if (!rx_skbuff) { |
| /* keep the original lists and buffers */ |
| netif_err(lp, drv, dev, "%s netdev_alloc_skb failed\n", |
| __func__); |
| goto free_all_new; |
| } |
| skb_reserve(rx_skbuff, NET_IP_ALIGN); |
| |
| new_dma_addr_list[new] = |
| pci_map_single(lp->pci_dev, rx_skbuff->data, |
| PKT_BUF_SIZE, PCI_DMA_FROMDEVICE); |
| if (pci_dma_mapping_error(lp->pci_dev, |
| new_dma_addr_list[new])) { |
| netif_err(lp, drv, dev, "%s dma mapping failed\n", |
| __func__); |
| dev_kfree_skb(new_skb_list[new]); |
| goto free_all_new; |
| } |
| new_rx_ring[new].base = cpu_to_le32(new_dma_addr_list[new]); |
| new_rx_ring[new].buf_length = cpu_to_le16(NEG_BUF_SIZE); |
| new_rx_ring[new].status = cpu_to_le16(0x8000); |
| } |
| /* and free any unneeded buffers */ |
| for (; new < lp->rx_ring_size; new++) { |
| if (lp->rx_skbuff[new]) { |
| if (!pci_dma_mapping_error(lp->pci_dev, |
| lp->rx_dma_addr[new])) |
| pci_unmap_single(lp->pci_dev, |
| lp->rx_dma_addr[new], |
| PKT_BUF_SIZE, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb(lp->rx_skbuff[new]); |
| } |
| } |
| |
| kfree(lp->rx_skbuff); |
| kfree(lp->rx_dma_addr); |
| pci_free_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_rx_head) * |
| lp->rx_ring_size, lp->rx_ring, |
| lp->rx_ring_dma_addr); |
| |
| lp->rx_ring_size = entries; |
| lp->rx_mod_mask = lp->rx_ring_size - 1; |
| lp->rx_len_bits = (size << 4); |
| lp->rx_ring = new_rx_ring; |
| lp->rx_ring_dma_addr = new_ring_dma_addr; |
| lp->rx_dma_addr = new_dma_addr_list; |
| lp->rx_skbuff = new_skb_list; |
| return; |
| |
| free_all_new: |
| while (--new >= lp->rx_ring_size) { |
| if (new_skb_list[new]) { |
| if (!pci_dma_mapping_error(lp->pci_dev, |
| new_dma_addr_list[new])) |
| pci_unmap_single(lp->pci_dev, |
| new_dma_addr_list[new], |
| PKT_BUF_SIZE, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb(new_skb_list[new]); |
| } |
| } |
| kfree(new_skb_list); |
| free_new_lists: |
| kfree(new_dma_addr_list); |
| free_new_rx_ring: |
| pci_free_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_rx_head) * entries, |
| new_rx_ring, |
| new_ring_dma_addr); |
| } |
| |
| static void pcnet32_purge_rx_ring(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int i; |
| |
| /* free all allocated skbuffs */ |
| for (i = 0; i < lp->rx_ring_size; i++) { |
| lp->rx_ring[i].status = 0; /* CPU owns buffer */ |
| wmb(); /* Make sure adapter sees owner change */ |
| if (lp->rx_skbuff[i]) { |
| if (!pci_dma_mapping_error(lp->pci_dev, |
| lp->rx_dma_addr[i])) |
| pci_unmap_single(lp->pci_dev, |
| lp->rx_dma_addr[i], |
| PKT_BUF_SIZE, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb_any(lp->rx_skbuff[i]); |
| } |
| lp->rx_skbuff[i] = NULL; |
| lp->rx_dma_addr[i] = 0; |
| } |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void pcnet32_poll_controller(struct net_device *dev) |
| { |
| disable_irq(dev->irq); |
| pcnet32_interrupt(0, dev); |
| enable_irq(dev->irq); |
| } |
| #endif |
| |
| /* |
| * lp->lock must be held. |
| */ |
| static int pcnet32_suspend(struct net_device *dev, unsigned long *flags, |
| int can_sleep) |
| { |
| int csr5; |
| struct pcnet32_private *lp = netdev_priv(dev); |
| const struct pcnet32_access *a = lp->a; |
| ulong ioaddr = dev->base_addr; |
| int ticks; |
| |
| /* really old chips have to be stopped. */ |
| if (lp->chip_version < PCNET32_79C970A) |
| return 0; |
| |
| /* set SUSPEND (SPND) - CSR5 bit 0 */ |
| csr5 = a->read_csr(ioaddr, CSR5); |
| a->write_csr(ioaddr, CSR5, csr5 | CSR5_SUSPEND); |
| |
| /* poll waiting for bit to be set */ |
| ticks = 0; |
| while (!(a->read_csr(ioaddr, CSR5) & CSR5_SUSPEND)) { |
| spin_unlock_irqrestore(&lp->lock, *flags); |
| if (can_sleep) |
| msleep(1); |
| else |
| mdelay(1); |
| spin_lock_irqsave(&lp->lock, *flags); |
| ticks++; |
| if (ticks > 200) { |
| netif_printk(lp, hw, KERN_DEBUG, dev, |
| "Error getting into suspend!\n"); |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| static void pcnet32_clr_suspend(struct pcnet32_private *lp, ulong ioaddr) |
| { |
| int csr5 = lp->a->read_csr(ioaddr, CSR5); |
| /* clear SUSPEND (SPND) - CSR5 bit 0 */ |
| lp->a->write_csr(ioaddr, CSR5, csr5 & ~CSR5_SUSPEND); |
| } |
| |
| static int pcnet32_get_link_ksettings(struct net_device *dev, |
| struct ethtool_link_ksettings *cmd) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| if (lp->mii) { |
| mii_ethtool_get_link_ksettings(&lp->mii_if, cmd); |
| } else if (lp->chip_version == PCNET32_79C970A) { |
| if (lp->autoneg) { |
| cmd->base.autoneg = AUTONEG_ENABLE; |
| if (lp->a->read_bcr(dev->base_addr, 4) == 0xc0) |
| cmd->base.port = PORT_AUI; |
| else |
| cmd->base.port = PORT_TP; |
| } else { |
| cmd->base.autoneg = AUTONEG_DISABLE; |
| cmd->base.port = lp->port_tp ? PORT_TP : PORT_AUI; |
| } |
| cmd->base.duplex = lp->fdx ? DUPLEX_FULL : DUPLEX_HALF; |
| cmd->base.speed = SPEED_10; |
| ethtool_convert_legacy_u32_to_link_mode( |
| cmd->link_modes.supported, |
| SUPPORTED_TP | SUPPORTED_AUI); |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return 0; |
| } |
| |
| static int pcnet32_set_link_ksettings(struct net_device *dev, |
| const struct ethtool_link_ksettings *cmd) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| ulong ioaddr = dev->base_addr; |
| unsigned long flags; |
| int r = -EOPNOTSUPP; |
| int suspended, bcr2, bcr9, csr15; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| if (lp->mii) { |
| r = mii_ethtool_set_link_ksettings(&lp->mii_if, cmd); |
| } else if (lp->chip_version == PCNET32_79C970A) { |
| suspended = pcnet32_suspend(dev, &flags, 0); |
| if (!suspended) |
| lp->a->write_csr(ioaddr, CSR0, CSR0_STOP); |
| |
| lp->autoneg = cmd->base.autoneg == AUTONEG_ENABLE; |
| bcr2 = lp->a->read_bcr(ioaddr, 2); |
| if (cmd->base.autoneg == AUTONEG_ENABLE) { |
| lp->a->write_bcr(ioaddr, 2, bcr2 | 0x0002); |
| } else { |
| lp->a->write_bcr(ioaddr, 2, bcr2 & ~0x0002); |
| |
| lp->port_tp = cmd->base.port == PORT_TP; |
| csr15 = lp->a->read_csr(ioaddr, CSR15) & ~0x0180; |
| if (cmd->base.port == PORT_TP) |
| csr15 |= 0x0080; |
| lp->a->write_csr(ioaddr, CSR15, csr15); |
| lp->init_block->mode = cpu_to_le16(csr15); |
| |
| lp->fdx = cmd->base.duplex == DUPLEX_FULL; |
| bcr9 = lp->a->read_bcr(ioaddr, 9) & ~0x0003; |
| if (cmd->base.duplex == DUPLEX_FULL) |
| bcr9 |= 0x0003; |
| lp->a->write_bcr(ioaddr, 9, bcr9); |
| } |
| if (suspended) |
| pcnet32_clr_suspend(lp, ioaddr); |
| else if (netif_running(dev)) |
| pcnet32_restart(dev, CSR0_NORMAL); |
| r = 0; |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return r; |
| } |
| |
| static void pcnet32_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| |
| strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
| if (lp->pci_dev) |
| strlcpy(info->bus_info, pci_name(lp->pci_dev), |
| sizeof(info->bus_info)); |
| else |
| snprintf(info->bus_info, sizeof(info->bus_info), |
| "VLB 0x%lx", dev->base_addr); |
| } |
| |
| static u32 pcnet32_get_link(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long flags; |
| int r; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| if (lp->mii) { |
| r = mii_link_ok(&lp->mii_if); |
| } else if (lp->chip_version == PCNET32_79C970A) { |
| ulong ioaddr = dev->base_addr; /* card base I/O address */ |
| /* only read link if port is set to TP */ |
| if (!lp->autoneg && lp->port_tp) |
| r = (lp->a->read_bcr(ioaddr, 4) != 0xc0); |
| else /* link always up for AUI port or port auto select */ |
| r = 1; |
| } else if (lp->chip_version > PCNET32_79C970A) { |
| ulong ioaddr = dev->base_addr; /* card base I/O address */ |
| r = (lp->a->read_bcr(ioaddr, 4) != 0xc0); |
| } else { /* can not detect link on really old chips */ |
| r = 1; |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return r; |
| } |
| |
| static u32 pcnet32_get_msglevel(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| return lp->msg_enable; |
| } |
| |
| static void pcnet32_set_msglevel(struct net_device *dev, u32 value) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| lp->msg_enable = value; |
| } |
| |
| static int pcnet32_nway_reset(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long flags; |
| int r = -EOPNOTSUPP; |
| |
| if (lp->mii) { |
| spin_lock_irqsave(&lp->lock, flags); |
| r = mii_nway_restart(&lp->mii_if); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| return r; |
| } |
| |
| static void pcnet32_get_ringparam(struct net_device *dev, |
| struct ethtool_ringparam *ering) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| |
| ering->tx_max_pending = TX_MAX_RING_SIZE; |
| ering->tx_pending = lp->tx_ring_size; |
| ering->rx_max_pending = RX_MAX_RING_SIZE; |
| ering->rx_pending = lp->rx_ring_size; |
| } |
| |
| static int pcnet32_set_ringparam(struct net_device *dev, |
| struct ethtool_ringparam *ering) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long flags; |
| unsigned int size; |
| ulong ioaddr = dev->base_addr; |
| int i; |
| |
| if (ering->rx_mini_pending || ering->rx_jumbo_pending) |
| return -EINVAL; |
| |
| if (netif_running(dev)) |
| pcnet32_netif_stop(dev); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| lp->a->write_csr(ioaddr, CSR0, CSR0_STOP); /* stop the chip */ |
| |
| size = min(ering->tx_pending, (unsigned int)TX_MAX_RING_SIZE); |
| |
| /* set the minimum ring size to 4, to allow the loopback test to work |
| * unchanged. |
| */ |
| for (i = 2; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { |
| if (size <= (1 << i)) |
| break; |
| } |
| if ((1 << i) != lp->tx_ring_size) |
| pcnet32_realloc_tx_ring(dev, lp, i); |
| |
| size = min(ering->rx_pending, (unsigned int)RX_MAX_RING_SIZE); |
| for (i = 2; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { |
| if (size <= (1 << i)) |
| break; |
| } |
| if ((1 << i) != lp->rx_ring_size) |
| pcnet32_realloc_rx_ring(dev, lp, i); |
| |
| lp->napi.weight = lp->rx_ring_size / 2; |
| |
| if (netif_running(dev)) { |
| pcnet32_netif_start(dev); |
| pcnet32_restart(dev, CSR0_NORMAL); |
| } |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| netif_info(lp, drv, dev, "Ring Param Settings: RX: %d, TX: %d\n", |
| lp->rx_ring_size, lp->tx_ring_size); |
| |
| return 0; |
| } |
| |
| static void pcnet32_get_strings(struct net_device *dev, u32 stringset, |
| u8 *data) |
| { |
| memcpy(data, pcnet32_gstrings_test, sizeof(pcnet32_gstrings_test)); |
| } |
| |
| static int pcnet32_get_sset_count(struct net_device *dev, int sset) |
| { |
| switch (sset) { |
| case ETH_SS_TEST: |
| return PCNET32_TEST_LEN; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static void pcnet32_ethtool_test(struct net_device *dev, |
| struct ethtool_test *test, u64 * data) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int rc; |
| |
| if (test->flags == ETH_TEST_FL_OFFLINE) { |
| rc = pcnet32_loopback_test(dev, data); |
| if (rc) { |
| netif_printk(lp, hw, KERN_DEBUG, dev, |
| "Loopback test failed\n"); |
| test->flags |= ETH_TEST_FL_FAILED; |
| } else |
| netif_printk(lp, hw, KERN_DEBUG, dev, |
| "Loopback test passed\n"); |
| } else |
| netif_printk(lp, hw, KERN_DEBUG, dev, |
| "No tests to run (specify 'Offline' on ethtool)\n"); |
| } /* end pcnet32_ethtool_test */ |
| |
| static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| const struct pcnet32_access *a = lp->a; /* access to registers */ |
| ulong ioaddr = dev->base_addr; /* card base I/O address */ |
| struct sk_buff *skb; /* sk buff */ |
| int x, i; /* counters */ |
| int numbuffs = 4; /* number of TX/RX buffers and descs */ |
| u16 status = 0x8300; /* TX ring status */ |
| __le16 teststatus; /* test of ring status */ |
| int rc; /* return code */ |
| int size; /* size of packets */ |
| unsigned char *packet; /* source packet data */ |
| static const int data_len = 60; /* length of source packets */ |
| unsigned long flags; |
| unsigned long ticks; |
| |
| rc = 1; /* default to fail */ |
| |
| if (netif_running(dev)) |
| pcnet32_netif_stop(dev); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| lp->a->write_csr(ioaddr, CSR0, CSR0_STOP); /* stop the chip */ |
| |
| numbuffs = min(numbuffs, (int)min(lp->rx_ring_size, lp->tx_ring_size)); |
| |
| /* Reset the PCNET32 */ |
| lp->a->reset(ioaddr); |
| lp->a->write_csr(ioaddr, CSR4, 0x0915); /* auto tx pad */ |
| |
| /* switch pcnet32 to 32bit mode */ |
| lp->a->write_bcr(ioaddr, 20, 2); |
| |
| /* purge & init rings but don't actually restart */ |
| pcnet32_restart(dev, 0x0000); |
| |
| lp->a->write_csr(ioaddr, CSR0, CSR0_STOP); /* Set STOP bit */ |
| |
| /* Initialize Transmit buffers. */ |
| size = data_len + 15; |
| for (x = 0; x < numbuffs; x++) { |
| skb = netdev_alloc_skb(dev, size); |
| if (!skb) { |
| netif_printk(lp, hw, KERN_DEBUG, dev, |
| "Cannot allocate skb at line: %d!\n", |
| __LINE__); |
| goto clean_up; |
| } |
| packet = skb->data; |
| skb_put(skb, size); /* create space for data */ |
| lp->tx_skbuff[x] = skb; |
| lp->tx_ring[x].length = cpu_to_le16(-skb->len); |
| lp->tx_ring[x].misc = 0; |
| |
| /* put DA and SA into the skb */ |
| for (i = 0; i < 6; i++) |
| *packet++ = dev->dev_addr[i]; |
| for (i = 0; i < 6; i++) |
| *packet++ = dev->dev_addr[i]; |
| /* type */ |
| *packet++ = 0x08; |
| *packet++ = 0x06; |
| /* packet number */ |
| *packet++ = x; |
| /* fill packet with data */ |
| for (i = 0; i < data_len; i++) |
| *packet++ = i; |
| |
| lp->tx_dma_addr[x] = |
| pci_map_single(lp->pci_dev, skb->data, skb->len, |
| PCI_DMA_TODEVICE); |
| if (pci_dma_mapping_error(lp->pci_dev, lp->tx_dma_addr[x])) { |
| netif_printk(lp, hw, KERN_DEBUG, dev, |
| "DMA mapping error at line: %d!\n", |
| __LINE__); |
| goto clean_up; |
| } |
| lp->tx_ring[x].base = cpu_to_le32(lp->tx_dma_addr[x]); |
| wmb(); /* Make sure owner changes after all others are visible */ |
| lp->tx_ring[x].status = cpu_to_le16(status); |
| } |
| |
| x = a->read_bcr(ioaddr, 32); /* set internal loopback in BCR32 */ |
| a->write_bcr(ioaddr, 32, x | 0x0002); |
| |
| /* set int loopback in CSR15 */ |
| x = a->read_csr(ioaddr, CSR15) & 0xfffc; |
| lp->a->write_csr(ioaddr, CSR15, x | 0x0044); |
| |
| teststatus = cpu_to_le16(0x8000); |
| lp->a->write_csr(ioaddr, CSR0, CSR0_START); /* Set STRT bit */ |
| |
| /* Check status of descriptors */ |
| for (x = 0; x < numbuffs; x++) { |
| ticks = 0; |
| rmb(); |
| while ((lp->rx_ring[x].status & teststatus) && (ticks < 200)) { |
| spin_unlock_irqrestore(&lp->lock, flags); |
| msleep(1); |
| spin_lock_irqsave(&lp->lock, flags); |
| rmb(); |
| ticks++; |
| } |
| if (ticks == 200) { |
| netif_err(lp, hw, dev, "Desc %d failed to reset!\n", x); |
| break; |
| } |
| } |
| |
| lp->a->write_csr(ioaddr, CSR0, CSR0_STOP); /* Set STOP bit */ |
| wmb(); |
| if (netif_msg_hw(lp) && netif_msg_pktdata(lp)) { |
| netdev_printk(KERN_DEBUG, dev, "RX loopback packets:\n"); |
| |
| for (x = 0; x < numbuffs; x++) { |
| netdev_printk(KERN_DEBUG, dev, "Packet %d: ", x); |
| skb = lp->rx_skbuff[x]; |
| for (i = 0; i < size; i++) |
| pr_cont(" %02x", *(skb->data + i)); |
| pr_cont("\n"); |
| } |
| } |
| |
| x = 0; |
| rc = 0; |
| while (x < numbuffs && !rc) { |
| skb = lp->rx_skbuff[x]; |
| packet = lp->tx_skbuff[x]->data; |
| for (i = 0; i < size; i++) { |
| if (*(skb->data + i) != packet[i]) { |
| netif_printk(lp, hw, KERN_DEBUG, dev, |
| "Error in compare! %2x - %02x %02x\n", |
| i, *(skb->data + i), packet[i]); |
| rc = 1; |
| break; |
| } |
| } |
| x++; |
| } |
| |
| clean_up: |
| *data1 = rc; |
| pcnet32_purge_tx_ring(dev); |
| |
| x = a->read_csr(ioaddr, CSR15); |
| a->write_csr(ioaddr, CSR15, (x & ~0x0044)); /* reset bits 6 and 2 */ |
| |
| x = a->read_bcr(ioaddr, 32); /* reset internal loopback */ |
| a->write_bcr(ioaddr, 32, (x & ~0x0002)); |
| |
| if (netif_running(dev)) { |
| pcnet32_netif_start(dev); |
| pcnet32_restart(dev, CSR0_NORMAL); |
| } else { |
| pcnet32_purge_rx_ring(dev); |
| lp->a->write_bcr(ioaddr, 20, 4); /* return to 16bit mode */ |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return rc; |
| } /* end pcnet32_loopback_test */ |
| |
| static int pcnet32_set_phys_id(struct net_device *dev, |
| enum ethtool_phys_id_state state) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| const struct pcnet32_access *a = lp->a; |
| ulong ioaddr = dev->base_addr; |
| unsigned long flags; |
| int i; |
| |
| switch (state) { |
| case ETHTOOL_ID_ACTIVE: |
| /* Save the current value of the bcrs */ |
| spin_lock_irqsave(&lp->lock, flags); |
| for (i = 4; i < 8; i++) |
| lp->save_regs[i - 4] = a->read_bcr(ioaddr, i); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return 2; /* cycle on/off twice per second */ |
| |
| case ETHTOOL_ID_ON: |
| case ETHTOOL_ID_OFF: |
| /* Blink the led */ |
| spin_lock_irqsave(&lp->lock, flags); |
| for (i = 4; i < 8; i++) |
| a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| break; |
| |
| case ETHTOOL_ID_INACTIVE: |
| /* Restore the original value of the bcrs */ |
| spin_lock_irqsave(&lp->lock, flags); |
| for (i = 4; i < 8; i++) |
| a->write_bcr(ioaddr, i, lp->save_regs[i - 4]); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| return 0; |
| } |
| |
| /* |
| * process one receive descriptor entry |
| */ |
| |
| static void pcnet32_rx_entry(struct net_device *dev, |
| struct pcnet32_private *lp, |
| struct pcnet32_rx_head *rxp, |
| int entry) |
| { |
| int status = (short)le16_to_cpu(rxp->status) >> 8; |
| int rx_in_place = 0; |
| struct sk_buff *skb; |
| short pkt_len; |
| |
| if (status != 0x03) { /* There was an error. */ |
| /* |
| * There is a tricky error noted by John Murphy, |
| * <murf@perftech.com> to Russ Nelson: Even with full-sized |
| * buffers it's possible for a jabber packet to use two |
| * buffers, with only the last correctly noting the error. |
| */ |
| if (status & 0x01) /* Only count a general error at the */ |
| dev->stats.rx_errors++; /* end of a packet. */ |
| if (status & 0x20) |
| dev->stats.rx_frame_errors++; |
| if (status & 0x10) |
| dev->stats.rx_over_errors++; |
| if (status & 0x08) |
| dev->stats.rx_crc_errors++; |
| if (status & 0x04) |
| dev->stats.rx_fifo_errors++; |
| return; |
| } |
| |
| pkt_len = (le32_to_cpu(rxp->msg_length) & 0xfff) - 4; |
| |
| /* Discard oversize frames. */ |
| if (unlikely(pkt_len > PKT_BUF_SIZE)) { |
| netif_err(lp, drv, dev, "Impossible packet size %d!\n", |
| pkt_len); |
| dev->stats.rx_errors++; |
| return; |
| } |
| if (pkt_len < 60) { |
| netif_err(lp, rx_err, dev, "Runt packet!\n"); |
| dev->stats.rx_errors++; |
| return; |
| } |
| |
| if (pkt_len > rx_copybreak) { |
| struct sk_buff *newskb; |
| dma_addr_t new_dma_addr; |
| |
| newskb = netdev_alloc_skb(dev, PKT_BUF_SKB); |
| /* |
| * map the new buffer, if mapping fails, drop the packet and |
| * reuse the old buffer |
| */ |
| if (newskb) { |
| skb_reserve(newskb, NET_IP_ALIGN); |
| new_dma_addr = pci_map_single(lp->pci_dev, |
| newskb->data, |
| PKT_BUF_SIZE, |
| PCI_DMA_FROMDEVICE); |
| if (pci_dma_mapping_error(lp->pci_dev, new_dma_addr)) { |
| netif_err(lp, rx_err, dev, |
| "DMA mapping error.\n"); |
| dev_kfree_skb(newskb); |
| skb = NULL; |
| } else { |
| skb = lp->rx_skbuff[entry]; |
| pci_unmap_single(lp->pci_dev, |
| lp->rx_dma_addr[entry], |
| PKT_BUF_SIZE, |
| PCI_DMA_FROMDEVICE); |
| skb_put(skb, pkt_len); |
| lp->rx_skbuff[entry] = newskb; |
| lp->rx_dma_addr[entry] = new_dma_addr; |
| rxp->base = cpu_to_le32(new_dma_addr); |
| rx_in_place = 1; |
| } |
| } else |
| skb = NULL; |
| } else |
| skb = netdev_alloc_skb(dev, pkt_len + NET_IP_ALIGN); |
| |
| if (skb == NULL) { |
| dev->stats.rx_dropped++; |
| return; |
| } |
| if (!rx_in_place) { |
| skb_reserve(skb, NET_IP_ALIGN); |
| skb_put(skb, pkt_len); /* Make room */ |
| pci_dma_sync_single_for_cpu(lp->pci_dev, |
| lp->rx_dma_addr[entry], |
| pkt_len, |
| PCI_DMA_FROMDEVICE); |
| skb_copy_to_linear_data(skb, |
| (unsigned char *)(lp->rx_skbuff[entry]->data), |
| pkt_len); |
| pci_dma_sync_single_for_device(lp->pci_dev, |
| lp->rx_dma_addr[entry], |
| pkt_len, |
| PCI_DMA_FROMDEVICE); |
| } |
| dev->stats.rx_bytes += skb->len; |
| skb->protocol = eth_type_trans(skb, dev); |
| netif_receive_skb(skb); |
| dev->stats.rx_packets++; |
| } |
| |
| static int pcnet32_rx(struct net_device *dev, int budget) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int entry = lp->cur_rx & lp->rx_mod_mask; |
| struct pcnet32_rx_head *rxp = &lp->rx_ring[entry]; |
| int npackets = 0; |
| |
| /* If we own the next entry, it's a new packet. Send it up. */ |
| while (npackets < budget && (short)le16_to_cpu(rxp->status) >= 0) { |
| pcnet32_rx_entry(dev, lp, rxp, entry); |
| npackets += 1; |
| /* |
| * The docs say that the buffer length isn't touched, but Andrew |
| * Boyd of QNX reports that some revs of the 79C965 clear it. |
| */ |
| rxp->buf_length = cpu_to_le16(NEG_BUF_SIZE); |
| wmb(); /* Make sure owner changes after others are visible */ |
| rxp->status = cpu_to_le16(0x8000); |
| entry = (++lp->cur_rx) & lp->rx_mod_mask; |
| rxp = &lp->rx_ring[entry]; |
| } |
| |
| return npackets; |
| } |
| |
| static int pcnet32_tx(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned int dirty_tx = lp->dirty_tx; |
| int delta; |
| int must_restart = 0; |
| |
| while (dirty_tx != lp->cur_tx) { |
| int entry = dirty_tx & lp->tx_mod_mask; |
| int status = (short)le16_to_cpu(lp->tx_ring[entry].status); |
| |
| if (status < 0) |
| break; /* It still hasn't been Txed */ |
| |
| lp->tx_ring[entry].base = 0; |
| |
| if (status & 0x4000) { |
| /* There was a major error, log it. */ |
| int err_status = le32_to_cpu(lp->tx_ring[entry].misc); |
| dev->stats.tx_errors++; |
| netif_err(lp, tx_err, dev, |
| "Tx error status=%04x err_status=%08x\n", |
| status, err_status); |
| if (err_status & 0x04000000) |
| dev->stats.tx_aborted_errors++; |
| if (err_status & 0x08000000) |
| dev->stats.tx_carrier_errors++; |
| if (err_status & 0x10000000) |
| dev->stats.tx_window_errors++; |
| #ifndef DO_DXSUFLO |
| if (err_status & 0x40000000) { |
| dev->stats.tx_fifo_errors++; |
| /* Ackk! On FIFO errors the Tx unit is turned off! */ |
| /* Remove this verbosity later! */ |
| netif_err(lp, tx_err, dev, "Tx FIFO error!\n"); |
| must_restart = 1; |
| } |
| #else |
| if (err_status & 0x40000000) { |
| dev->stats.tx_fifo_errors++; |
| if (!lp->dxsuflo) { /* If controller doesn't recover ... */ |
| /* Ackk! On FIFO errors the Tx unit is turned off! */ |
| /* Remove this verbosity later! */ |
| netif_err(lp, tx_err, dev, "Tx FIFO error!\n"); |
| must_restart = 1; |
| } |
| } |
| #endif |
| } else { |
| if (status & 0x1800) |
| dev->stats.collisions++; |
| dev->stats.tx_packets++; |
| } |
| |
| /* We must free the original skb */ |
| if (lp->tx_skbuff[entry]) { |
| pci_unmap_single(lp->pci_dev, |
| lp->tx_dma_addr[entry], |
| lp->tx_skbuff[entry]-> |
| len, PCI_DMA_TODEVICE); |
| dev_kfree_skb_any(lp->tx_skbuff[entry]); |
| lp->tx_skbuff[entry] = NULL; |
| lp->tx_dma_addr[entry] = 0; |
| } |
| dirty_tx++; |
| } |
| |
| delta = (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask + lp->tx_ring_size); |
| if (delta > lp->tx_ring_size) { |
| netif_err(lp, drv, dev, "out-of-sync dirty pointer, %d vs. %d, full=%d\n", |
| dirty_tx, lp->cur_tx, lp->tx_full); |
| dirty_tx += lp->tx_ring_size; |
| delta -= lp->tx_ring_size; |
| } |
| |
| if (lp->tx_full && |
| netif_queue_stopped(dev) && |
| delta < lp->tx_ring_size - 2) { |
| /* The ring is no longer full, clear tbusy. */ |
| lp->tx_full = 0; |
| netif_wake_queue(dev); |
| } |
| lp->dirty_tx = dirty_tx; |
| |
| return must_restart; |
| } |
| |
| static int pcnet32_poll(struct napi_struct *napi, int budget) |
| { |
| struct pcnet32_private *lp = container_of(napi, struct pcnet32_private, napi); |
| struct net_device *dev = lp->dev; |
| unsigned long ioaddr = dev->base_addr; |
| unsigned long flags; |
| int work_done; |
| u16 val; |
| |
| work_done = pcnet32_rx(dev, budget); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| if (pcnet32_tx(dev)) { |
| /* reset the chip to clear the error condition, then restart */ |
| lp->a->reset(ioaddr); |
| lp->a->write_csr(ioaddr, CSR4, 0x0915); /* auto tx pad */ |
| pcnet32_restart(dev, CSR0_START); |
| netif_wake_queue(dev); |
| } |
| |
| if (work_done < budget && napi_complete_done(napi, work_done)) { |
| /* clear interrupt masks */ |
| val = lp->a->read_csr(ioaddr, CSR3); |
| val &= 0x00ff; |
| lp->a->write_csr(ioaddr, CSR3, val); |
| |
| /* Set interrupt enable. */ |
| lp->a->write_csr(ioaddr, CSR0, CSR0_INTEN); |
| } |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return work_done; |
| } |
| |
| #define PCNET32_REGS_PER_PHY 32 |
| #define PCNET32_MAX_PHYS 32 |
| static int pcnet32_get_regs_len(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int j = lp->phycount * PCNET32_REGS_PER_PHY; |
| |
| return (PCNET32_NUM_REGS + j) * sizeof(u16); |
| } |
| |
| static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, |
| void *ptr) |
| { |
| int i, csr0; |
| u16 *buff = ptr; |
| struct pcnet32_private *lp = netdev_priv(dev); |
| const struct pcnet32_access *a = lp->a; |
| ulong ioaddr = dev->base_addr; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| csr0 = a->read_csr(ioaddr, CSR0); |
| if (!(csr0 & CSR0_STOP)) /* If not stopped */ |
| pcnet32_suspend(dev, &flags, 1); |
| |
| /* read address PROM */ |
| for (i = 0; i < 16; i += 2) |
| *buff++ = inw(ioaddr + i); |
| |
| /* read control and status registers */ |
| for (i = 0; i < 90; i++) |
| *buff++ = a->read_csr(ioaddr, i); |
| |
| *buff++ = a->read_csr(ioaddr, 112); |
| *buff++ = a->read_csr(ioaddr, 114); |
| |
| /* read bus configuration registers */ |
| for (i = 0; i < 30; i++) |
| *buff++ = a->read_bcr(ioaddr, i); |
| |
| *buff++ = 0; /* skip bcr30 so as not to hang 79C976 */ |
| |
| for (i = 31; i < 36; i++) |
| *buff++ = a->read_bcr(ioaddr, i); |
| |
| /* read mii phy registers */ |
| if (lp->mii) { |
| int j; |
| for (j = 0; j < PCNET32_MAX_PHYS; j++) { |
| if (lp->phymask & (1 << j)) { |
| for (i = 0; i < PCNET32_REGS_PER_PHY; i++) { |
| lp->a->write_bcr(ioaddr, 33, |
| (j << 5) | i); |
| *buff++ = lp->a->read_bcr(ioaddr, 34); |
| } |
| } |
| } |
| } |
| |
| if (!(csr0 & CSR0_STOP)) /* If not stopped */ |
| pcnet32_clr_suspend(lp, ioaddr); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| static const struct ethtool_ops pcnet32_ethtool_ops = { |
| .get_drvinfo = pcnet32_get_drvinfo, |
| .get_msglevel = pcnet32_get_msglevel, |
| .set_msglevel = pcnet32_set_msglevel, |
| .nway_reset = pcnet32_nway_reset, |
| .get_link = pcnet32_get_link, |
| .get_ringparam = pcnet32_get_ringparam, |
| .set_ringparam = pcnet32_set_ringparam, |
| .get_strings = pcnet32_get_strings, |
| .self_test = pcnet32_ethtool_test, |
| .set_phys_id = pcnet32_set_phys_id, |
| .get_regs_len = pcnet32_get_regs_len, |
| .get_regs = pcnet32_get_regs, |
| .get_sset_count = pcnet32_get_sset_count, |
| .get_link_ksettings = pcnet32_get_link_ksettings, |
| .set_link_ksettings = pcnet32_set_link_ksettings, |
| }; |
| |
| /* only probes for non-PCI devices, the rest are handled by |
| * pci_register_driver via pcnet32_probe_pci */ |
| |
| static void pcnet32_probe_vlbus(unsigned int *pcnet32_portlist) |
| { |
| unsigned int *port, ioaddr; |
| |
| /* search for PCnet32 VLB cards at known addresses */ |
| for (port = pcnet32_portlist; (ioaddr = *port); port++) { |
| if (request_region |
| (ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_vlbus")) { |
| /* check if there is really a pcnet chip on that ioaddr */ |
| if ((inb(ioaddr + 14) == 0x57) && |
| (inb(ioaddr + 15) == 0x57)) { |
| pcnet32_probe1(ioaddr, 0, NULL); |
| } else { |
| release_region(ioaddr, PCNET32_TOTAL_SIZE); |
| } |
| } |
| } |
| } |
| |
| static int |
| pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| unsigned long ioaddr; |
| int err; |
| |
| err = pci_enable_device(pdev); |
| if (err < 0) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_err("failed to enable device -- err=%d\n", err); |
| return err; |
| } |
| pci_set_master(pdev); |
| |
| if (!pci_resource_len(pdev, 0)) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_err("card has no PCI IO resources, aborting\n"); |
| return -ENODEV; |
| } |
| |
| err = pci_set_dma_mask(pdev, PCNET32_DMA_MASK); |
| if (err) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_err("architecture does not support 32bit PCI busmaster DMA\n"); |
| return err; |
| } |
| |
| ioaddr = pci_resource_start(pdev, 0); |
| if (!request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci")) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_err("io address range already allocated\n"); |
| return -EBUSY; |
| } |
| |
| err = pcnet32_probe1(ioaddr, 1, pdev); |
| if (err < 0) |
| pci_disable_device(pdev); |
| |
| return err; |
| } |
| |
| static const struct net_device_ops pcnet32_netdev_ops = { |
| .ndo_open = pcnet32_open, |
| .ndo_stop = pcnet32_close, |
| .ndo_start_xmit = pcnet32_start_xmit, |
| .ndo_tx_timeout = pcnet32_tx_timeout, |
| .ndo_get_stats = pcnet32_get_stats, |
| .ndo_set_rx_mode = pcnet32_set_multicast_list, |
| .ndo_do_ioctl = pcnet32_ioctl, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = pcnet32_poll_controller, |
| #endif |
| }; |
| |
| /* pcnet32_probe1 |
| * Called from both pcnet32_probe_vlbus and pcnet_probe_pci. |
| * pdev will be NULL when called from pcnet32_probe_vlbus. |
| */ |
| static int |
| pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) |
| { |
| struct pcnet32_private *lp; |
| int i, media; |
| int fdx, mii, fset, dxsuflo, sram; |
| int chip_version; |
| char *chipname; |
| struct net_device *dev; |
| const struct pcnet32_access *a = NULL; |
| u8 promaddr[ETH_ALEN]; |
| int ret = -ENODEV; |
| |
| /* reset the chip */ |
| pcnet32_wio_reset(ioaddr); |
| |
| /* NOTE: 16-bit check is first, otherwise some older PCnet chips fail */ |
| if (pcnet32_wio_read_csr(ioaddr, 0) == 4 && pcnet32_wio_check(ioaddr)) { |
| a = &pcnet32_wio; |
| } else { |
| pcnet32_dwio_reset(ioaddr); |
| if (pcnet32_dwio_read_csr(ioaddr, 0) == 4 && |
| pcnet32_dwio_check(ioaddr)) { |
| a = &pcnet32_dwio; |
| } else { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_err("No access methods\n"); |
| goto err_release_region; |
| } |
| } |
| |
| chip_version = |
| a->read_csr(ioaddr, 88) | (a->read_csr(ioaddr, 89) << 16); |
| if ((pcnet32_debug & NETIF_MSG_PROBE) && (pcnet32_debug & NETIF_MSG_HW)) |
| pr_info(" PCnet chip version is %#x\n", chip_version); |
| if ((chip_version & 0xfff) != 0x003) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_info("Unsupported chip version\n"); |
| goto err_release_region; |
| } |
| |
| /* initialize variables */ |
| fdx = mii = fset = dxsuflo = sram = 0; |
| chip_version = (chip_version >> 12) & 0xffff; |
| |
| switch (chip_version) { |
| case 0x2420: |
| chipname = "PCnet/PCI 79C970"; /* PCI */ |
| break; |
| case 0x2430: |
| if (shared) |
| chipname = "PCnet/PCI 79C970"; /* 970 gives the wrong chip id back */ |
| else |
| chipname = "PCnet/32 79C965"; /* 486/VL bus */ |
| break; |
| case 0x2621: |
| chipname = "PCnet/PCI II 79C970A"; /* PCI */ |
| fdx = 1; |
| break; |
| case 0x2623: |
| chipname = "PCnet/FAST 79C971"; /* PCI */ |
| fdx = 1; |
| mii = 1; |
| fset = 1; |
| break; |
| case 0x2624: |
| chipname = "PCnet/FAST+ 79C972"; /* PCI */ |
| fdx = 1; |
| mii = 1; |
| fset = 1; |
| break; |
| case 0x2625: |
| chipname = "PCnet/FAST III 79C973"; /* PCI */ |
| fdx = 1; |
| mii = 1; |
| sram = 1; |
| break; |
| case 0x2626: |
| chipname = "PCnet/Home 79C978"; /* PCI */ |
| fdx = 1; |
| /* |
| * This is based on specs published at www.amd.com. This section |
| * assumes that a card with a 79C978 wants to go into standard |
| * ethernet mode. The 79C978 can also go into 1Mb HomePNA mode, |
| * and the module option homepna=1 can select this instead. |
| */ |
| media = a->read_bcr(ioaddr, 49); |
| media &= ~3; /* default to 10Mb ethernet */ |
| if (cards_found < MAX_UNITS && homepna[cards_found]) |
| media |= 1; /* switch to home wiring mode */ |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_DEBUG PFX "media set to %sMbit mode\n", |
| (media & 1) ? "1" : "10"); |
| a->write_bcr(ioaddr, 49, media); |
| break; |
| case 0x2627: |
| chipname = "PCnet/FAST III 79C975"; /* PCI */ |
| fdx = 1; |
| mii = 1; |
| sram = 1; |
| break; |
| case 0x2628: |
| chipname = "PCnet/PRO 79C976"; |
| fdx = 1; |
| mii = 1; |
| break; |
| default: |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_info("PCnet version %#x, no PCnet32 chip\n", |
| chip_version); |
| goto err_release_region; |
| } |
| |
| /* |
| * On selected chips turn on the BCR18:NOUFLO bit. This stops transmit |
| * starting until the packet is loaded. Strike one for reliability, lose |
| * one for latency - although on PCI this isn't a big loss. Older chips |
| * have FIFO's smaller than a packet, so you can't do this. |
| * Turn on BCR18:BurstRdEn and BCR18:BurstWrEn. |
| */ |
| |
| if (fset) { |
| a->write_bcr(ioaddr, 18, (a->read_bcr(ioaddr, 18) | 0x0860)); |
| a->write_csr(ioaddr, 80, |
| (a->read_csr(ioaddr, 80) & 0x0C00) | 0x0c00); |
| dxsuflo = 1; |
| } |
| |
| /* |
| * The Am79C973/Am79C975 controllers come with 12K of SRAM |
| * which we can use for the Tx/Rx buffers but most importantly, |
| * the use of SRAM allow us to use the BCR18:NOUFLO bit to avoid |
| * Tx fifo underflows. |
| */ |
| if (sram) { |
| /* |
| * The SRAM is being configured in two steps. First we |
| * set the SRAM size in the BCR25:SRAM_SIZE bits. According |
| * to the datasheet, each bit corresponds to a 512-byte |
| * page so we can have at most 24 pages. The SRAM_SIZE |
| * holds the value of the upper 8 bits of the 16-bit SRAM size. |
| * The low 8-bits start at 0x00 and end at 0xff. So the |
| * address range is from 0x0000 up to 0x17ff. Therefore, |
| * the SRAM_SIZE is set to 0x17. The next step is to set |
| * the BCR26:SRAM_BND midway through so the Tx and Rx |
| * buffers can share the SRAM equally. |
| */ |
| a->write_bcr(ioaddr, 25, 0x17); |
| a->write_bcr(ioaddr, 26, 0xc); |
| /* And finally enable the NOUFLO bit */ |
| a->write_bcr(ioaddr, 18, a->read_bcr(ioaddr, 18) | (1 << 11)); |
| } |
| |
| dev = alloc_etherdev(sizeof(*lp)); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err_release_region; |
| } |
| |
| if (pdev) |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_info("%s at %#3lx,", chipname, ioaddr); |
| |
| /* In most chips, after a chip reset, the ethernet address is read from the |
| * station address PROM at the base address and programmed into the |
| * "Physical Address Registers" CSR12-14. |
| * As a precautionary measure, we read the PROM values and complain if |
| * they disagree with the CSRs. If they miscompare, and the PROM addr |
| * is valid, then the PROM addr is used. |
| */ |
| for (i = 0; i < 3; i++) { |
| unsigned int val; |
| val = a->read_csr(ioaddr, i + 12) & 0x0ffff; |
| /* There may be endianness issues here. */ |
| dev->dev_addr[2 * i] = val & 0x0ff; |
| dev->dev_addr[2 * i + 1] = (val >> 8) & 0x0ff; |
| } |
| |
| /* read PROM address and compare with CSR address */ |
| for (i = 0; i < ETH_ALEN; i++) |
| promaddr[i] = inb(ioaddr + i); |
| |
| if (!ether_addr_equal(promaddr, dev->dev_addr) || |
| !is_valid_ether_addr(dev->dev_addr)) { |
| if (is_valid_ether_addr(promaddr)) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) { |
| pr_cont(" warning: CSR address invalid,\n"); |
| pr_info(" using instead PROM address of"); |
| } |
| memcpy(dev->dev_addr, promaddr, ETH_ALEN); |
| } |
| } |
| |
| /* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ |
| if (!is_valid_ether_addr(dev->dev_addr)) |
| eth_zero_addr(dev->dev_addr); |
| |
| if (pcnet32_debug & NETIF_MSG_PROBE) { |
| pr_cont(" %pM", dev->dev_addr); |
| |
| /* Version 0x2623 and 0x2624 */ |
| if (((chip_version + 1) & 0xfffe) == 0x2624) { |
| i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */ |
| pr_info(" tx_start_pt(0x%04x):", i); |
| switch (i >> 10) { |
| case 0: |
| pr_cont(" 20 bytes,"); |
| break; |
| case 1: |
| pr_cont(" 64 bytes,"); |
| break; |
| case 2: |
| pr_cont(" 128 bytes,"); |
| break; |
| case 3: |
| pr_cont("~220 bytes,"); |
| break; |
| } |
| i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */ |
| pr_cont(" BCR18(%x):", i & 0xffff); |
| if (i & (1 << 5)) |
| pr_cont("BurstWrEn "); |
| if (i & (1 << 6)) |
| pr_cont("BurstRdEn "); |
| if (i & (1 << 7)) |
| pr_cont("DWordIO "); |
| if (i & (1 << 11)) |
| pr_cont("NoUFlow "); |
| i = a->read_bcr(ioaddr, 25); |
| pr_info(" SRAMSIZE=0x%04x,", i << 8); |
| i = a->read_bcr(ioaddr, 26); |
| pr_cont(" SRAM_BND=0x%04x,", i << 8); |
| i = a->read_bcr(ioaddr, 27); |
| if (i & (1 << 14)) |
| pr_cont("LowLatRx"); |
| } |
| } |
| |
| dev->base_addr = ioaddr; |
| lp = netdev_priv(dev); |
| /* pci_alloc_consistent returns page-aligned memory, so we do not have to check the alignment */ |
| lp->init_block = pci_alloc_consistent(pdev, sizeof(*lp->init_block), |
| &lp->init_dma_addr); |
| if (!lp->init_block) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_err("Consistent memory allocation failed\n"); |
| ret = -ENOMEM; |
| goto err_free_netdev; |
| } |
| lp->pci_dev = pdev; |
| |
| lp->dev = dev; |
| |
| spin_lock_init(&lp->lock); |
| |
| lp->name = chipname; |
| lp->shared_irq = shared; |
| lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */ |
| lp->rx_ring_size = RX_RING_SIZE; /* default rx ring size */ |
| lp->tx_mod_mask = lp->tx_ring_size - 1; |
| lp->rx_mod_mask = lp->rx_ring_size - 1; |
| lp->tx_len_bits = (PCNET32_LOG_TX_BUFFERS << 12); |
| lp->rx_len_bits = (PCNET32_LOG_RX_BUFFERS << 4); |
| lp->mii_if.full_duplex = fdx; |
| lp->mii_if.phy_id_mask = 0x1f; |
| lp->mii_if.reg_num_mask = 0x1f; |
| lp->dxsuflo = dxsuflo; |
| lp->mii = mii; |
| lp->chip_version = chip_version; |
| lp->msg_enable = pcnet32_debug; |
| if ((cards_found >= MAX_UNITS) || |
| (options[cards_found] >= sizeof(options_mapping))) |
| lp->options = PCNET32_PORT_ASEL; |
| else |
| lp->options = options_mapping[options[cards_found]]; |
| /* force default port to TP on 79C970A so link detection can work */ |
| if (lp->chip_version == PCNET32_79C970A) |
| lp->options = PCNET32_PORT_10BT; |
| lp->mii_if.dev = dev; |
| lp->mii_if.mdio_read = mdio_read; |
| lp->mii_if.mdio_write = mdio_write; |
| |
| /* napi.weight is used in both the napi and non-napi cases */ |
| lp->napi.weight = lp->rx_ring_size / 2; |
| |
| netif_napi_add(dev, &lp->napi, pcnet32_poll, lp->rx_ring_size / 2); |
| |
| if (fdx && !(lp->options & PCNET32_PORT_ASEL) && |
| ((cards_found >= MAX_UNITS) || full_duplex[cards_found])) |
| lp->options |= PCNET32_PORT_FD; |
| |
| lp->a = a; |
| |
| /* prior to register_netdev, dev->name is not yet correct */ |
| if (pcnet32_alloc_ring(dev, pci_name(lp->pci_dev))) { |
| ret = -ENOMEM; |
| goto err_free_ring; |
| } |
| /* detect special T1/E1 WAN card by checking for MAC address */ |
| if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0 && |
| dev->dev_addr[2] == 0x75) |
| lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI; |
| |
| lp->init_block->mode = cpu_to_le16(0x0003); /* Disable Rx and Tx. */ |
| lp->init_block->tlen_rlen = |
| cpu_to_le16(lp->tx_len_bits | lp->rx_len_bits); |
| for (i = 0; i < 6; i++) |
| lp->init_block->phys_addr[i] = dev->dev_addr[i]; |
| lp->init_block->filter[0] = 0x00000000; |
| lp->init_block->filter[1] = 0x00000000; |
| lp->init_block->rx_ring = cpu_to_le32(lp->rx_ring_dma_addr); |
| lp->init_block->tx_ring = cpu_to_le32(lp->tx_ring_dma_addr); |
| |
| /* switch pcnet32 to 32bit mode */ |
| a->write_bcr(ioaddr, 20, 2); |
| |
| a->write_csr(ioaddr, 1, (lp->init_dma_addr & 0xffff)); |
| a->write_csr(ioaddr, 2, (lp->init_dma_addr >> 16)); |
| |
| if (pdev) { /* use the IRQ provided by PCI */ |
| dev->irq = pdev->irq; |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_cont(" assigned IRQ %d\n", dev->irq); |
| } else { |
| unsigned long irq_mask = probe_irq_on(); |
| |
| /* |
| * To auto-IRQ we enable the initialization-done and DMA error |
| * interrupts. For ISA boards we get a DMA error, but VLB and PCI |
| * boards will work. |
| */ |
| /* Trigger an initialization just for the interrupt. */ |
| a->write_csr(ioaddr, CSR0, CSR0_INTEN | CSR0_INIT); |
| mdelay(1); |
| |
| dev->irq = probe_irq_off(irq_mask); |
| if (!dev->irq) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_cont(", failed to detect IRQ line\n"); |
| ret = -ENODEV; |
| goto err_free_ring; |
| } |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_cont(", probed IRQ %d\n", dev->irq); |
| } |
| |
| /* Set the mii phy_id so that we can query the link state */ |
| if (lp->mii) { |
| /* lp->phycount and lp->phymask are set to 0 by memset above */ |
| |
| lp->mii_if.phy_id = ((lp->a->read_bcr(ioaddr, 33)) >> 5) & 0x1f; |
| /* scan for PHYs */ |
| for (i = 0; i < PCNET32_MAX_PHYS; i++) { |
| unsigned short id1, id2; |
| |
| id1 = mdio_read(dev, i, MII_PHYSID1); |
| if (id1 == 0xffff) |
| continue; |
| id2 = mdio_read(dev, i, MII_PHYSID2); |
| if (id2 == 0xffff) |
| continue; |
| if (i == 31 && ((chip_version + 1) & 0xfffe) == 0x2624) |
| continue; /* 79C971 & 79C972 have phantom phy at id 31 */ |
| lp->phycount++; |
| lp->phymask |= (1 << i); |
| lp->mii_if.phy_id = i; |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_info("Found PHY %04x:%04x at address %d\n", |
| id1, id2, i); |
| } |
| lp->a->write_bcr(ioaddr, 33, (lp->mii_if.phy_id) << 5); |
| if (lp->phycount > 1) |
| lp->options |= PCNET32_PORT_MII; |
| } |
| |
| init_timer(&lp->watchdog_timer); |
| lp->watchdog_timer.data = (unsigned long)dev; |
| lp->watchdog_timer.function = (void *)&pcnet32_watchdog; |
| |
| /* The PCNET32-specific entries in the device structure. */ |
| dev->netdev_ops = &pcnet32_netdev_ops; |
| dev->ethtool_ops = &pcnet32_ethtool_ops; |
| dev->watchdog_timeo = (5 * HZ); |
| |
| /* Fill in the generic fields of the device structure. */ |
| if (register_netdev(dev)) |
| goto err_free_ring; |
| |
| if (pdev) { |
| pci_set_drvdata(pdev, dev); |
| } else { |
| lp->next = pcnet32_dev; |
| pcnet32_dev = dev; |
| } |
| |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| pr_info("%s: registered as %s\n", dev->name, lp->name); |
| cards_found++; |
| |
| /* enable LED writes */ |
| a->write_bcr(ioaddr, 2, a->read_bcr(ioaddr, 2) | 0x1000); |
| |
| return 0; |
| |
| err_free_ring: |
| pcnet32_free_ring(dev); |
| pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), |
| lp->init_block, lp->init_dma_addr); |
| err_free_netdev: |
| free_netdev(dev); |
| err_release_region: |
| release_region(ioaddr, PCNET32_TOTAL_SIZE); |
| return ret; |
| } |
| |
| /* if any allocation fails, caller must also call pcnet32_free_ring */ |
| static int pcnet32_alloc_ring(struct net_device *dev, const char *name) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| |
| lp->tx_ring = pci_alloc_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_tx_head) * |
| lp->tx_ring_size, |
| &lp->tx_ring_dma_addr); |
| if (lp->tx_ring == NULL) { |
| netif_err(lp, drv, dev, "Consistent memory allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| lp->rx_ring = pci_alloc_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_rx_head) * |
| lp->rx_ring_size, |
| &lp->rx_ring_dma_addr); |
| if (lp->rx_ring == NULL) { |
| netif_err(lp, drv, dev, "Consistent memory allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| lp->tx_dma_addr = kcalloc(lp->tx_ring_size, sizeof(dma_addr_t), |
| GFP_ATOMIC); |
| if (!lp->tx_dma_addr) |
| return -ENOMEM; |
| |
| lp->rx_dma_addr = kcalloc(lp->rx_ring_size, sizeof(dma_addr_t), |
| GFP_ATOMIC); |
| if (!lp->rx_dma_addr) |
| return -ENOMEM; |
| |
| lp->tx_skbuff = kcalloc(lp->tx_ring_size, sizeof(struct sk_buff *), |
| GFP_ATOMIC); |
| if (!lp->tx_skbuff) |
| return -ENOMEM; |
| |
| lp->rx_skbuff = kcalloc(lp->rx_ring_size, sizeof(struct sk_buff *), |
| GFP_ATOMIC); |
| if (!lp->rx_skbuff) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static void pcnet32_free_ring(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| |
| kfree(lp->tx_skbuff); |
| lp->tx_skbuff = NULL; |
| |
| kfree(lp->rx_skbuff); |
| lp->rx_skbuff = NULL; |
| |
| kfree(lp->tx_dma_addr); |
| lp->tx_dma_addr = NULL; |
| |
| kfree(lp->rx_dma_addr); |
| lp->rx_dma_addr = NULL; |
| |
| if (lp->tx_ring) { |
| pci_free_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_tx_head) * |
| lp->tx_ring_size, lp->tx_ring, |
| lp->tx_ring_dma_addr); |
| lp->tx_ring = NULL; |
| } |
| |
| if (lp->rx_ring) { |
| pci_free_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_rx_head) * |
| lp->rx_ring_size, lp->rx_ring, |
| lp->rx_ring_dma_addr); |
| lp->rx_ring = NULL; |
| } |
| } |
| |
| static int pcnet32_open(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| struct pci_dev *pdev = lp->pci_dev; |
| unsigned long ioaddr = dev->base_addr; |
| u16 val; |
| int i; |
| int rc; |
| unsigned long flags; |
| |
| if (request_irq(dev->irq, pcnet32_interrupt, |
| lp->shared_irq ? IRQF_SHARED : 0, dev->name, |
| (void *)dev)) { |
| return -EAGAIN; |
| } |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| /* Check for a valid station address */ |
| if (!is_valid_ether_addr(dev->dev_addr)) { |
| rc = -EINVAL; |
| goto err_free_irq; |
| } |
| |
| /* Reset the PCNET32 */ |
| lp->a->reset(ioaddr); |
| |
| /* switch pcnet32 to 32bit mode */ |
| lp->a->write_bcr(ioaddr, 20, 2); |
| |
| netif_printk(lp, ifup, KERN_DEBUG, dev, |
| "%s() irq %d tx/rx rings %#x/%#x init %#x\n", |
| __func__, dev->irq, (u32) (lp->tx_ring_dma_addr), |
| (u32) (lp->rx_ring_dma_addr), |
| (u32) (lp->init_dma_addr)); |
| |
| lp->autoneg = !!(lp->options & PCNET32_PORT_ASEL); |
| lp->port_tp = !!(lp->options & PCNET32_PORT_10BT); |
| lp->fdx = !!(lp->options & PCNET32_PORT_FD); |
| |
| /* set/reset autoselect bit */ |
| val = lp->a->read_bcr(ioaddr, 2) & ~2; |
| if (lp->options & PCNET32_PORT_ASEL) |
| val |= 2; |
| lp->a->write_bcr(ioaddr, 2, val); |
| |
| /* handle full duplex setting */ |
| if (lp->mii_if.full_duplex) { |
| val = lp->a->read_bcr(ioaddr, 9) & ~3; |
| if (lp->options & PCNET32_PORT_FD) { |
| val |= 1; |
| if (lp->options == (PCNET32_PORT_FD | PCNET32_PORT_AUI)) |
| val |= 2; |
| } else if (lp->options & PCNET32_PORT_ASEL) { |
| /* workaround of xSeries250, turn on for 79C975 only */ |
| if (lp->chip_version == 0x2627) |
| val |= 3; |
| } |
| lp->a->write_bcr(ioaddr, 9, val); |
| } |
| |
| /* set/reset GPSI bit in test register */ |
| val = lp->a->read_csr(ioaddr, 124) & ~0x10; |
| if ((lp->options & PCNET32_PORT_PORTSEL) == PCNET32_PORT_GPSI) |
| val |= 0x10; |
| lp->a->write_csr(ioaddr, 124, val); |
| |
| /* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */ |
| if (pdev && pdev->subsystem_vendor == PCI_VENDOR_ID_AT && |
| (pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX || |
| pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) { |
| if (lp->options & PCNET32_PORT_ASEL) { |
| lp->options = PCNET32_PORT_FD | PCNET32_PORT_100; |
| netif_printk(lp, link, KERN_DEBUG, dev, |
| "Setting 100Mb-Full Duplex\n"); |
| } |
| } |
| if (lp->phycount < 2) { |
| /* |
| * 24 Jun 2004 according AMD, in order to change the PHY, |
| * DANAS (or DISPM for 79C976) must be set; then select the speed, |
| * duplex, and/or enable auto negotiation, and clear DANAS |
| */ |
| if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) { |
| lp->a->write_bcr(ioaddr, 32, |
| lp->a->read_bcr(ioaddr, 32) | 0x0080); |
| /* disable Auto Negotiation, set 10Mpbs, HD */ |
| val = lp->a->read_bcr(ioaddr, 32) & ~0xb8; |
| if (lp->options & PCNET32_PORT_FD) |
| val |= 0x10; |
| if (lp->options & PCNET32_PORT_100) |
| val |= 0x08; |
| lp->a->write_bcr(ioaddr, 32, val); |
| } else { |
| if (lp->options & PCNET32_PORT_ASEL) { |
| lp->a->write_bcr(ioaddr, 32, |
| lp->a->read_bcr(ioaddr, |
| 32) | 0x0080); |
| /* enable auto negotiate, setup, disable fd */ |
| val = lp->a->read_bcr(ioaddr, 32) & ~0x98; |
| val |= 0x20; |
| lp->a->write_bcr(ioaddr, 32, val); |
| } |
| } |
| } else { |
| int first_phy = -1; |
| u16 bmcr; |
| u32 bcr9; |
| struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; |
| |
| /* |
| * There is really no good other way to handle multiple PHYs |
| * other than turning off all automatics |
| */ |
| val = lp->a->read_bcr(ioaddr, 2); |
| lp->a->write_bcr(ioaddr, 2, val & ~2); |
| val = lp->a->read_bcr(ioaddr, 32); |
| lp->a->write_bcr(ioaddr, 32, val & ~(1 << 7)); /* stop MII manager */ |
| |
| if (!(lp->options & PCNET32_PORT_ASEL)) { |
| /* setup ecmd */ |
| ecmd.port = PORT_MII; |
| ecmd.transceiver = XCVR_INTERNAL; |
| ecmd.autoneg = AUTONEG_DISABLE; |
| ethtool_cmd_speed_set(&ecmd, |
| (lp->options & PCNET32_PORT_100) ? |
| SPEED_100 : SPEED_10); |
| bcr9 = lp->a->read_bcr(ioaddr, 9); |
| |
| if (lp->options & PCNET32_PORT_FD) { |
| ecmd.duplex = DUPLEX_FULL; |
| bcr9 |= (1 << 0); |
| } else { |
| ecmd.duplex = DUPLEX_HALF; |
| bcr9 |= ~(1 << 0); |
| } |
| lp->a->write_bcr(ioaddr, 9, bcr9); |
| } |
| |
| for (i = 0; i < PCNET32_MAX_PHYS; i++) { |
| if (lp->phymask & (1 << i)) { |
| /* isolate all but the first PHY */ |
| bmcr = mdio_read(dev, i, MII_BMCR); |
| if (first_phy == -1) { |
| first_phy = i; |
| mdio_write(dev, i, MII_BMCR, |
| bmcr & ~BMCR_ISOLATE); |
| } else { |
| mdio_write(dev, i, MII_BMCR, |
| bmcr | BMCR_ISOLATE); |
| } |
| /* use mii_ethtool_sset to setup PHY */ |
| lp->mii_if.phy_id = i; |
| ecmd.phy_address = i; |
| if (lp->options & PCNET32_PORT_ASEL) { |
| mii_ethtool_gset(&lp->mii_if, &ecmd); |
| ecmd.autoneg = AUTONEG_ENABLE; |
| } |
| mii_ethtool_sset(&lp->mii_if, &ecmd); |
| } |
| } |
| lp->mii_if.phy_id = first_phy; |
| netif_info(lp, link, dev, "Using PHY number %d\n", first_phy); |
| } |
| |
| #ifdef DO_DXSUFLO |
| if (lp->dxsuflo) { /* Disable transmit stop on underflow */ |
| val = lp->a->read_csr(ioaddr, CSR3); |
| val |= 0x40; |
| lp->a->write_csr(ioaddr, CSR3, val); |
| } |
| #endif |
| |
| lp->init_block->mode = |
| cpu_to_le16((lp->options & PCNET32_PORT_PORTSEL) << 7); |
| pcnet32_load_multicast(dev); |
| |
| if (pcnet32_init_ring(dev)) { |
| rc = -ENOMEM; |
| goto err_free_ring; |
| } |
| |
| napi_enable(&lp->napi); |
| |
| /* Re-initialize the PCNET32, and start it when done. */ |
| lp->a->write_csr(ioaddr, 1, (lp->init_dma_addr & 0xffff)); |
| lp->a->write_csr(ioaddr, 2, (lp->init_dma_addr >> 16)); |
| |
| lp->a->write_csr(ioaddr, CSR4, 0x0915); /* auto tx pad */ |
| lp->a->write_csr(ioaddr, CSR0, CSR0_INIT); |
| |
| netif_start_queue(dev); |
| |
| if (lp->chip_version >= PCNET32_79C970A) { |
| /* Print the link status and start the watchdog */ |
| pcnet32_check_media(dev, 1); |
| mod_timer(&lp->watchdog_timer, PCNET32_WATCHDOG_TIMEOUT); |
| } |
| |
| i = 0; |
| while (i++ < 100) |
| if (lp->a->read_csr(ioaddr, CSR0) & CSR0_IDON) |
| break; |
| /* |
| * We used to clear the InitDone bit, 0x0100, here but Mark Stockton |
| * reports that doing so triggers a bug in the '974. |
| */ |
| lp->a->write_csr(ioaddr, CSR0, CSR0_NORMAL); |
| |
| netif_printk(lp, ifup, KERN_DEBUG, dev, |
| "pcnet32 open after %d ticks, init block %#x csr0 %4.4x\n", |
| i, |
| (u32) (lp->init_dma_addr), |
| lp->a->read_csr(ioaddr, CSR0)); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return 0; /* Always succeed */ |
| |
| err_free_ring: |
| /* free any allocated skbuffs */ |
| pcnet32_purge_rx_ring(dev); |
| |
| /* |
| * Switch back to 16bit mode to avoid problems with dumb |
| * DOS packet driver after a warm reboot |
| */ |
| lp->a->write_bcr(ioaddr, 20, 4); |
| |
| err_free_irq: |
| spin_unlock_irqrestore(&lp->lock, flags); |
| free_irq(dev->irq, dev); |
| return rc; |
| } |
| |
| /* |
| * The LANCE has been halted for one reason or another (busmaster memory |
| * arbitration error, Tx FIFO underflow, driver stopped it to reconfigure, |
| * etc.). Modern LANCE variants always reload their ring-buffer |
| * configuration when restarted, so we must reinitialize our ring |
| * context before restarting. As part of this reinitialization, |
| * find all packets still on the Tx ring and pretend that they had been |
| * sent (in effect, drop the packets on the floor) - the higher-level |
| * protocols will time out and retransmit. It'd be better to shuffle |
| * these skbs to a temp list and then actually re-Tx them after |
| * restarting the chip, but I'm too lazy to do so right now. dplatt@3do.com |
| */ |
| |
| static void pcnet32_purge_tx_ring(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int i; |
| |
| for (i = 0; i < lp->tx_ring_size; i++) { |
| lp->tx_ring[i].status = 0; /* CPU owns buffer */ |
| wmb(); /* Make sure adapter sees owner change */ |
| if (lp->tx_skbuff[i]) { |
| if (!pci_dma_mapping_error(lp->pci_dev, |
| lp->tx_dma_addr[i])) |
| pci_unmap_single(lp->pci_dev, |
| lp->tx_dma_addr[i], |
| lp->tx_skbuff[i]->len, |
| PCI_DMA_TODEVICE); |
| dev_kfree_skb_any(lp->tx_skbuff[i]); |
| } |
| lp->tx_skbuff[i] = NULL; |
| lp->tx_dma_addr[i] = 0; |
| } |
| } |
| |
| /* Initialize the PCNET32 Rx and Tx rings. */ |
| static int pcnet32_init_ring(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int i; |
| |
| lp->tx_full = 0; |
| lp->cur_rx = lp->cur_tx = 0; |
| lp->dirty_rx = lp->dirty_tx = 0; |
| |
| for (i = 0; i < lp->rx_ring_size; i++) { |
| struct sk_buff *rx_skbuff = lp->rx_skbuff[i]; |
| if (rx_skbuff == NULL) { |
| lp->rx_skbuff[i] = netdev_alloc_skb(dev, PKT_BUF_SKB); |
| rx_skbuff = lp->rx_skbuff[i]; |
| if (!rx_skbuff) { |
| /* there is not much we can do at this point */ |
| netif_err(lp, drv, dev, "%s netdev_alloc_skb failed\n", |
| __func__); |
| return -1; |
| } |
| skb_reserve(rx_skbuff, NET_IP_ALIGN); |
| } |
| |
| rmb(); |
| if (lp->rx_dma_addr[i] == 0) { |
| lp->rx_dma_addr[i] = |
| pci_map_single(lp->pci_dev, rx_skbuff->data, |
| PKT_BUF_SIZE, PCI_DMA_FROMDEVICE); |
| if (pci_dma_mapping_error(lp->pci_dev, |
| lp->rx_dma_addr[i])) { |
| /* there is not much we can do at this point */ |
| netif_err(lp, drv, dev, |
| "%s pci dma mapping error\n", |
| __func__); |
| return -1; |
| } |
| } |
| lp->rx_ring[i].base = cpu_to_le32(lp->rx_dma_addr[i]); |
| lp->rx_ring[i].buf_length = cpu_to_le16(NEG_BUF_SIZE); |
| wmb(); /* Make sure owner changes after all others are visible */ |
| lp->rx_ring[i].status = cpu_to_le16(0x8000); |
| } |
| /* The Tx buffer address is filled in as needed, but we do need to clear |
| * the upper ownership bit. */ |
| for (i = 0; i < lp->tx_ring_size; i++) { |
| lp->tx_ring[i].status = 0; /* CPU owns buffer */ |
| wmb(); /* Make sure adapter sees owner change */ |
| lp->tx_ring[i].base = 0; |
| lp->tx_dma_addr[i] = 0; |
| } |
| |
| lp->init_block->tlen_rlen = |
| cpu_to_le16(lp->tx_len_bits | lp->rx_len_bits); |
| for (i = 0; i < 6; i++) |
| lp->init_block->phys_addr[i] = dev->dev_addr[i]; |
| lp->init_block->rx_ring = cpu_to_le32(lp->rx_ring_dma_addr); |
| lp->init_block->tx_ring = cpu_to_le32(lp->tx_ring_dma_addr); |
| wmb(); /* Make sure all changes are visible */ |
| return 0; |
| } |
| |
| /* the pcnet32 has been issued a stop or reset. Wait for the stop bit |
| * then flush the pending transmit operations, re-initialize the ring, |
| * and tell the chip to initialize. |
| */ |
| static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long ioaddr = dev->base_addr; |
| int i; |
| |
| /* wait for stop */ |
| for (i = 0; i < 100; i++) |
| if (lp->a->read_csr(ioaddr, CSR0) & CSR0_STOP) |
| break; |
| |
| if (i >= 100) |
| netif_err(lp, drv, dev, "%s timed out waiting for stop\n", |
| __func__); |
| |
| pcnet32_purge_tx_ring(dev); |
| if (pcnet32_init_ring(dev)) |
| return; |
| |
| /* ReInit Ring */ |
| lp->a->write_csr(ioaddr, CSR0, CSR0_INIT); |
| i = 0; |
| while (i++ < 1000) |
| if (lp->a->read_csr(ioaddr, CSR0) & CSR0_IDON) |
| break; |
| |
| lp->a->write_csr(ioaddr, CSR0, csr0_bits); |
| } |
| |
| static void pcnet32_tx_timeout(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long ioaddr = dev->base_addr, flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| /* Transmitter timeout, serious problems. */ |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| pr_err("%s: transmit timed out, status %4.4x, resetting\n", |
| dev->name, lp->a->read_csr(ioaddr, CSR0)); |
| lp->a->write_csr(ioaddr, CSR0, CSR0_STOP); |
| dev->stats.tx_errors++; |
| if (netif_msg_tx_err(lp)) { |
| int i; |
| printk(KERN_DEBUG |
| " Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.", |
| lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "", |
| lp->cur_rx); |
| for (i = 0; i < lp->rx_ring_size; i++) |
| printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", |
| le32_to_cpu(lp->rx_ring[i].base), |
| (-le16_to_cpu(lp->rx_ring[i].buf_length)) & |
| 0xffff, le32_to_cpu(lp->rx_ring[i].msg_length), |
| le16_to_cpu(lp->rx_ring[i].status)); |
| for (i = 0; i < lp->tx_ring_size; i++) |
| printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", |
| le32_to_cpu(lp->tx_ring[i].base), |
| (-le16_to_cpu(lp->tx_ring[i].length)) & 0xffff, |
| le32_to_cpu(lp->tx_ring[i].misc), |
| le16_to_cpu(lp->tx_ring[i].status)); |
| printk("\n"); |
| } |
| pcnet32_restart(dev, CSR0_NORMAL); |
| |
| netif_trans_update(dev); /* prevent tx timeout */ |
| netif_wake_queue(dev); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| static netdev_tx_t pcnet32_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long ioaddr = dev->base_addr; |
| u16 status; |
| int entry; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| netif_printk(lp, tx_queued, KERN_DEBUG, dev, |
| "%s() called, csr0 %4.4x\n", |
| __func__, lp->a->read_csr(ioaddr, CSR0)); |
| |
| /* Default status -- will not enable Successful-TxDone |
| * interrupt when that option is available to us. |
| */ |
| status = 0x8300; |
| |
| /* Fill in a Tx ring entry */ |
| |
| /* Mask to ring buffer boundary. */ |
| entry = lp->cur_tx & lp->tx_mod_mask; |
| |
| /* Caution: the write order is important here, set the status |
| * with the "ownership" bits last. */ |
| |
| lp->tx_ring[entry].length = cpu_to_le16(-skb->len); |
| |
| lp->tx_ring[entry].misc = 0x00000000; |
| |
| lp->tx_dma_addr[entry] = |
| pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE); |
| if (pci_dma_mapping_error(lp->pci_dev, lp->tx_dma_addr[entry])) { |
| dev_kfree_skb_any(skb); |
| dev->stats.tx_dropped++; |
| goto drop_packet; |
| } |
| lp->tx_skbuff[entry] = skb; |
| lp->tx_ring[entry].base = cpu_to_le32(lp->tx_dma_addr[entry]); |
| wmb(); /* Make sure owner changes after all others are visible */ |
| lp->tx_ring[entry].status = cpu_to_le16(status); |
| |
| lp->cur_tx++; |
| dev->stats.tx_bytes += skb->len; |
| |
| /* Trigger an immediate send poll. */ |
| lp->a->write_csr(ioaddr, CSR0, CSR0_INTEN | CSR0_TXPOLL); |
| |
| if (lp->tx_ring[(entry + 1) & lp->tx_mod_mask].base != 0) { |
| lp->tx_full = 1; |
| netif_stop_queue(dev); |
| } |
| drop_packet: |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return NETDEV_TX_OK; |
| } |
| |
| /* The PCNET32 interrupt handler. */ |
| static irqreturn_t |
| pcnet32_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct pcnet32_private *lp; |
| unsigned long ioaddr; |
| u16 csr0; |
| int boguscnt = max_interrupt_work; |
| |
| ioaddr = dev->base_addr; |
| lp = netdev_priv(dev); |
| |
| spin_lock(&lp->lock); |
| |
| csr0 = lp->a->read_csr(ioaddr, CSR0); |
| while ((csr0 & 0x8f00) && --boguscnt >= 0) { |
| if (csr0 == 0xffff) |
| break; /* PCMCIA remove happened */ |
| /* Acknowledge all of the current interrupt sources ASAP. */ |
| lp->a->write_csr(ioaddr, CSR0, csr0 & ~0x004f); |
| |
| netif_printk(lp, intr, KERN_DEBUG, dev, |
| "interrupt csr0=%#2.2x new csr=%#2.2x\n", |
| csr0, lp->a->read_csr(ioaddr, CSR0)); |
| |
| /* Log misc errors. */ |
| if (csr0 & 0x4000) |
| dev->stats.tx_errors++; /* Tx babble. */ |
| if (csr0 & 0x1000) { |
| /* |
| * This happens when our receive ring is full. This |
| * shouldn't be a problem as we will see normal rx |
| * interrupts for the frames in the receive ring. But |
| * there are some PCI chipsets (I can reproduce this |
| * on SP3G with Intel saturn chipset) which have |
| * sometimes problems and will fill up the receive |
| * ring with error descriptors. In this situation we |
| * don't get a rx interrupt, but a missed frame |
| * interrupt sooner or later. |
| */ |
| dev->stats.rx_errors++; /* Missed a Rx frame. */ |
| } |
| if (csr0 & 0x0800) { |
| netif_err(lp, drv, dev, "Bus master arbitration failure, status %4.4x\n", |
| csr0); |
| /* unlike for the lance, there is no restart needed */ |
| } |
| if (napi_schedule_prep(&lp->napi)) { |
| u16 val; |
| /* set interrupt masks */ |
| val = lp->a->read_csr(ioaddr, CSR3); |
| val |= 0x5f00; |
| lp->a->write_csr(ioaddr, CSR3, val); |
| |
| __napi_schedule(&lp->napi); |
| break; |
| } |
| csr0 = lp->a->read_csr(ioaddr, CSR0); |
| } |
| |
| netif_printk(lp, intr, KERN_DEBUG, dev, |
| "exiting interrupt, csr0=%#4.4x\n", |
| lp->a->read_csr(ioaddr, CSR0)); |
| |
| spin_unlock(&lp->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int pcnet32_close(struct net_device *dev) |
| { |
| unsigned long ioaddr = dev->base_addr; |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long flags; |
| |
| del_timer_sync(&lp->watchdog_timer); |
| |
| netif_stop_queue(dev); |
| napi_disable(&lp->napi); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| dev->stats.rx_missed_errors = lp->a->read_csr(ioaddr, 112); |
| |
| netif_printk(lp, ifdown, KERN_DEBUG, dev, |
| "Shutting down ethercard, status was %2.2x\n", |
| lp->a->read_csr(ioaddr, CSR0)); |
| |
| /* We stop the PCNET32 here -- it occasionally polls memory if we don't. */ |
| lp->a->write_csr(ioaddr, CSR0, CSR0_STOP); |
| |
| /* |
| * Switch back to 16bit mode to avoid problems with dumb |
| * DOS packet driver after a warm reboot |
| */ |
| lp->a->write_bcr(ioaddr, 20, 4); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| free_irq(dev->irq, dev); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| pcnet32_purge_rx_ring(dev); |
| pcnet32_purge_tx_ring(dev); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return 0; |
| } |
| |
| static struct net_device_stats *pcnet32_get_stats(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long ioaddr = dev->base_addr; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| dev->stats.rx_missed_errors = lp->a->read_csr(ioaddr, 112); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return &dev->stats; |
| } |
| |
| /* taken from the sunlance driver, which it took from the depca driver */ |
| static void pcnet32_load_multicast(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| volatile struct pcnet32_init_block *ib = lp->init_block; |
| volatile __le16 *mcast_table = (__le16 *)ib->filter; |
| struct netdev_hw_addr *ha; |
| unsigned long ioaddr = dev->base_addr; |
| int i; |
| u32 crc; |
| |
| /* set all multicast bits */ |
| if (dev->flags & IFF_ALLMULTI) { |
| ib->filter[0] = cpu_to_le32(~0U); |
| ib->filter[1] = cpu_to_le32(~0U); |
| lp->a->write_csr(ioaddr, PCNET32_MC_FILTER, 0xffff); |
| lp->a->write_csr(ioaddr, PCNET32_MC_FILTER+1, 0xffff); |
| lp->a->write_csr(ioaddr, PCNET32_MC_FILTER+2, 0xffff); |
| lp->a->write_csr(ioaddr, PCNET32_MC_FILTER+3, 0xffff); |
| return; |
| } |
| /* clear the multicast filter */ |
| ib->filter[0] = 0; |
| ib->filter[1] = 0; |
| |
| /* Add addresses */ |
| netdev_for_each_mc_addr(ha, dev) { |
| crc = ether_crc_le(6, ha->addr); |
| crc = crc >> 26; |
| mcast_table[crc >> 4] |= cpu_to_le16(1 << (crc & 0xf)); |
| } |
| for (i = 0; i < 4; i++) |
| lp->a->write_csr(ioaddr, PCNET32_MC_FILTER + i, |
| le16_to_cpu(mcast_table[i])); |
| } |
| |
| /* |
| * Set or clear the multicast filter for this adaptor. |
| */ |
| static void pcnet32_set_multicast_list(struct net_device *dev) |
| { |
| unsigned long ioaddr = dev->base_addr, flags; |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int csr15, suspended; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| suspended = pcnet32_suspend(dev, &flags, 0); |
| csr15 = lp->a->read_csr(ioaddr, CSR15); |
| if (dev->flags & IFF_PROMISC) { |
| /* Log any net taps. */ |
| netif_info(lp, hw, dev, "Promiscuous mode enabled\n"); |
| lp->init_block->mode = |
| cpu_to_le16(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) << |
| 7); |
| lp->a->write_csr(ioaddr, CSR15, csr15 | 0x8000); |
| } else { |
| lp->init_block->mode = |
| cpu_to_le16((lp->options & PCNET32_PORT_PORTSEL) << 7); |
| lp->a->write_csr(ioaddr, CSR15, csr15 & 0x7fff); |
| pcnet32_load_multicast(dev); |
| } |
| |
| if (suspended) { |
| pcnet32_clr_suspend(lp, ioaddr); |
| } else { |
| lp->a->write_csr(ioaddr, CSR0, CSR0_STOP); |
| pcnet32_restart(dev, CSR0_NORMAL); |
| netif_wake_queue(dev); |
| } |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| /* This routine assumes that the lp->lock is held */ |
| static int mdio_read(struct net_device *dev, int phy_id, int reg_num) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long ioaddr = dev->base_addr; |
| u16 val_out; |
| |
| if (!lp->mii) |
| return 0; |
| |
| lp->a->write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f)); |
| val_out = lp->a->read_bcr(ioaddr, 34); |
| |
| return val_out; |
| } |
| |
| /* This routine assumes that the lp->lock is held */ |
| static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long ioaddr = dev->base_addr; |
| |
| if (!lp->mii) |
| return; |
| |
| lp->a->write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f)); |
| lp->a->write_bcr(ioaddr, 34, val); |
| } |
| |
| static int pcnet32_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int rc; |
| unsigned long flags; |
| |
| /* SIOC[GS]MIIxxx ioctls */ |
| if (lp->mii) { |
| spin_lock_irqsave(&lp->lock, flags); |
| rc = generic_mii_ioctl(&lp->mii_if, if_mii(rq), cmd, NULL); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } else { |
| rc = -EOPNOTSUPP; |
| } |
| |
| return rc; |
| } |
| |
| static int pcnet32_check_otherphy(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| struct mii_if_info mii = lp->mii_if; |
| u16 bmcr; |
| int i; |
| |
| for (i = 0; i < PCNET32_MAX_PHYS; i++) { |
| if (i == lp->mii_if.phy_id) |
| continue; /* skip active phy */ |
| if (lp->phymask & (1 << i)) { |
| mii.phy_id = i; |
| if (mii_link_ok(&mii)) { |
| /* found PHY with active link */ |
| netif_info(lp, link, dev, "Using PHY number %d\n", |
| i); |
| |
| /* isolate inactive phy */ |
| bmcr = |
| mdio_read(dev, lp->mii_if.phy_id, MII_BMCR); |
| mdio_write(dev, lp->mii_if.phy_id, MII_BMCR, |
| bmcr | BMCR_ISOLATE); |
| |
| /* de-isolate new phy */ |
| bmcr = mdio_read(dev, i, MII_BMCR); |
| mdio_write(dev, i, MII_BMCR, |
| bmcr & ~BMCR_ISOLATE); |
| |
| /* set new phy address */ |
| lp->mii_if.phy_id = i; |
| return 1; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * Show the status of the media. Similar to mii_check_media however it |
| * correctly shows the link speed for all (tested) pcnet32 variants. |
| * Devices with no mii just report link state without speed. |
| * |
| * Caller is assumed to hold and release the lp->lock. |
| */ |
| |
| static void pcnet32_check_media(struct net_device *dev, int verbose) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| int curr_link; |
| int prev_link = netif_carrier_ok(dev) ? 1 : 0; |
| u32 bcr9; |
| |
| if (lp->mii) { |
| curr_link = mii_link_ok(&lp->mii_if); |
| } else if (lp->chip_version == PCNET32_79C970A) { |
| ulong ioaddr = dev->base_addr; /* card base I/O address */ |
| /* only read link if port is set to TP */ |
| if (!lp->autoneg && lp->port_tp) |
| curr_link = (lp->a->read_bcr(ioaddr, 4) != 0xc0); |
| else /* link always up for AUI port or port auto select */ |
| curr_link = 1; |
| } else { |
| ulong ioaddr = dev->base_addr; /* card base I/O address */ |
| curr_link = (lp->a->read_bcr(ioaddr, 4) != 0xc0); |
| } |
| if (!curr_link) { |
| if (prev_link || verbose) { |
| netif_carrier_off(dev); |
| netif_info(lp, link, dev, "link down\n"); |
| } |
| if (lp->phycount > 1) { |
| curr_link = pcnet32_check_otherphy(dev); |
| prev_link = 0; |
| } |
| } else if (verbose || !prev_link) { |
| netif_carrier_on(dev); |
| if (lp->mii) { |
| if (netif_msg_link(lp)) { |
| struct ethtool_cmd ecmd = { |
| .cmd = ETHTOOL_GSET }; |
| mii_ethtool_gset(&lp->mii_if, &ecmd); |
| netdev_info(dev, "link up, %uMbps, %s-duplex\n", |
| ethtool_cmd_speed(&ecmd), |
| (ecmd.duplex == DUPLEX_FULL) |
| ? "full" : "half"); |
| } |
| bcr9 = lp->a->read_bcr(dev->base_addr, 9); |
| if ((bcr9 & (1 << 0)) != lp->mii_if.full_duplex) { |
| if (lp->mii_if.full_duplex) |
| bcr9 |= (1 << 0); |
| else |
| bcr9 &= ~(1 << 0); |
| lp->a->write_bcr(dev->base_addr, 9, bcr9); |
| } |
| } else { |
| netif_info(lp, link, dev, "link up\n"); |
| } |
| } |
| } |
| |
| /* |
| * Check for loss of link and link establishment. |
| * Could possibly be changed to use mii_check_media instead. |
| */ |
| |
| static void pcnet32_watchdog(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| unsigned long flags; |
| |
| /* Print the link status if it has changed */ |
| spin_lock_irqsave(&lp->lock, flags); |
| pcnet32_check_media(dev, 0); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| mod_timer(&lp->watchdog_timer, round_jiffies(PCNET32_WATCHDOG_TIMEOUT)); |
| } |
| |
| static int pcnet32_pm_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| if (netif_running(dev)) { |
| netif_device_detach(dev); |
| pcnet32_close(dev); |
| } |
| pci_save_state(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| return 0; |
| } |
| |
| static int pcnet32_pm_resume(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| if (netif_running(dev)) { |
| pcnet32_open(dev); |
| netif_device_attach(dev); |
| } |
| return 0; |
| } |
| |
| static void pcnet32_remove_one(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| if (dev) { |
| struct pcnet32_private *lp = netdev_priv(dev); |
| |
| unregister_netdev(dev); |
| pcnet32_free_ring(dev); |
| release_region(dev->base_addr, PCNET32_TOTAL_SIZE); |
| pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), |
| lp->init_block, lp->init_dma_addr); |
| free_netdev(dev); |
| pci_disable_device(pdev); |
| } |
| } |
| |
| static struct pci_driver pcnet32_driver = { |
| .name = DRV_NAME, |
| .probe = pcnet32_probe_pci, |
| .remove = pcnet32_remove_one, |
| .id_table = pcnet32_pci_tbl, |
| .suspend = pcnet32_pm_suspend, |
| .resume = pcnet32_pm_resume, |
| }; |
| |
| /* An additional parameter that may be passed in... */ |
| static int debug = -1; |
| static int tx_start_pt = -1; |
| static int pcnet32_have_pci; |
| |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, DRV_NAME " debug level"); |
| module_param(max_interrupt_work, int, 0); |
| MODULE_PARM_DESC(max_interrupt_work, |
| DRV_NAME " maximum events handled per interrupt"); |
| module_param(rx_copybreak, int, 0); |
| MODULE_PARM_DESC(rx_copybreak, |
| DRV_NAME " copy breakpoint for copy-only-tiny-frames"); |
| module_param(tx_start_pt, int, 0); |
| MODULE_PARM_DESC(tx_start_pt, DRV_NAME " transmit start point (0-3)"); |
| module_param(pcnet32vlb, int, 0); |
| MODULE_PARM_DESC(pcnet32vlb, DRV_NAME " Vesa local bus (VLB) support (0/1)"); |
| module_param_array(options, int, NULL, 0); |
| MODULE_PARM_DESC(options, DRV_NAME " initial option setting(s) (0-15)"); |
| module_param_array(full_duplex, int, NULL, 0); |
| MODULE_PARM_DESC(full_duplex, DRV_NAME " full duplex setting(s) (1)"); |
| /* Module Parameter for HomePNA cards added by Patrick Simmons, 2004 */ |
| module_param_array(homepna, int, NULL, 0); |
| MODULE_PARM_DESC(homepna, |
| DRV_NAME |
| " mode for 79C978 cards (1 for HomePNA, 0 for Ethernet, default Ethernet"); |
| |
| MODULE_AUTHOR("Thomas Bogendoerfer"); |
| MODULE_DESCRIPTION("Driver for PCnet32 and PCnetPCI based ethercards"); |
| MODULE_LICENSE("GPL"); |
| |
| #define PCNET32_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) |
| |
| static int __init pcnet32_init_module(void) |
| { |
| pr_info("%s", version); |
| |
| pcnet32_debug = netif_msg_init(debug, PCNET32_MSG_DEFAULT); |
| |
| if ((tx_start_pt >= 0) && (tx_start_pt <= 3)) |
| tx_start = tx_start_pt; |
| |
| /* find the PCI devices */ |
| if (!pci_register_driver(&pcnet32_driver)) |
| pcnet32_have_pci = 1; |
| |
| /* should we find any remaining VLbus devices ? */ |
| if (pcnet32vlb) |
| pcnet32_probe_vlbus(pcnet32_portlist); |
| |
| if (cards_found && (pcnet32_debug & NETIF_MSG_PROBE)) |
| pr_info("%d cards_found\n", cards_found); |
| |
| return (pcnet32_have_pci + cards_found) ? 0 : -ENODEV; |
| } |
| |
| static void __exit pcnet32_cleanup_module(void) |
| { |
| struct net_device *next_dev; |
| |
| while (pcnet32_dev) { |
| struct pcnet32_private *lp = netdev_priv(pcnet32_dev); |
| next_dev = lp->next; |
| unregister_netdev(pcnet32_dev); |
| pcnet32_free_ring(pcnet32_dev); |
| release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE); |
| pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), |
| lp->init_block, lp->init_dma_addr); |
| free_netdev(pcnet32_dev); |
| pcnet32_dev = next_dev; |
| } |
| |
| if (pcnet32_have_pci) |
| pci_unregister_driver(&pcnet32_driver); |
| } |
| |
| module_init(pcnet32_init_module); |
| module_exit(pcnet32_cleanup_module); |
| |
| /* |
| * Local variables: |
| * c-indent-level: 4 |
| * tab-width: 8 |
| * End: |
| */ |