| /* |
| * linux/arch/arm/kernel/head-common.S |
| * |
| * Copyright (C) 1994-2002 Russell King |
| * Copyright (c) 2003 ARM Limited |
| * All Rights Reserved |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #define ATAG_CORE 0x54410001 |
| #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) |
| #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) |
| |
| #ifdef CONFIG_CPU_BIG_ENDIAN |
| #define OF_DT_MAGIC 0xd00dfeed |
| #else |
| #define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */ |
| #endif |
| |
| /* |
| * Exception handling. Something went wrong and we can't proceed. We |
| * ought to tell the user, but since we don't have any guarantee that |
| * we're even running on the right architecture, we do virtually nothing. |
| * |
| * If CONFIG_DEBUG_LL is set we try to print out something about the error |
| * and hope for the best (useful if bootloader fails to pass a proper |
| * machine ID for example). |
| */ |
| __HEAD |
| |
| /* Determine validity of the r2 atags pointer. The heuristic requires |
| * that the pointer be aligned, in the first 16k of physical RAM and |
| * that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE |
| * is selected, then it will also accept a dtb pointer. Future revisions |
| * of this function may be more lenient with the physical address and |
| * may also be able to move the ATAGS block if necessary. |
| * |
| * Returns: |
| * r2 either valid atags pointer, valid dtb pointer, or zero |
| * r5, r6 corrupted |
| */ |
| __vet_atags: |
| tst r2, #0x3 @ aligned? |
| bne 1f |
| |
| ldr r5, [r2, #0] |
| #ifdef CONFIG_OF_FLATTREE |
| ldr r6, =OF_DT_MAGIC @ is it a DTB? |
| cmp r5, r6 |
| beq 2f |
| #endif |
| cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE? |
| cmpne r5, #ATAG_CORE_SIZE_EMPTY |
| bne 1f |
| ldr r5, [r2, #4] |
| ldr r6, =ATAG_CORE |
| cmp r5, r6 |
| bne 1f |
| |
| 2: mov pc, lr @ atag/dtb pointer is ok |
| |
| 1: mov r2, #0 |
| mov pc, lr |
| ENDPROC(__vet_atags) |
| |
| /* |
| * The following fragment of code is executed with the MMU on in MMU mode, |
| * and uses absolute addresses; this is not position independent. |
| * |
| * r0 = cp#15 control register |
| * r1 = machine ID |
| * r2 = atags/dtb pointer |
| * r9 = processor ID |
| */ |
| __INIT |
| __mmap_switched: |
| adr r3, __mmap_switched_data |
| |
| ldmia r3!, {r4, r5, r6, r7} |
| cmp r4, r5 @ Copy data segment if needed |
| 1: cmpne r5, r6 |
| ldrne fp, [r4], #4 |
| strne fp, [r5], #4 |
| bne 1b |
| |
| mov fp, #0 @ Clear BSS (and zero fp) |
| 1: cmp r6, r7 |
| strcc fp, [r6],#4 |
| bcc 1b |
| |
| ARM( ldmia r3, {r4, r5, r6, r7, sp}) |
| THUMB( ldmia r3, {r4, r5, r6, r7} ) |
| THUMB( ldr sp, [r3, #16] ) |
| str r9, [r4] @ Save processor ID |
| str r1, [r5] @ Save machine type |
| str r2, [r6] @ Save atags pointer |
| cmp r7, #0 |
| bicne r4, r0, #CR_A @ Clear 'A' bit |
| stmneia r7, {r0, r4} @ Save control register values |
| b start_kernel |
| ENDPROC(__mmap_switched) |
| |
| .align 2 |
| .type __mmap_switched_data, %object |
| __mmap_switched_data: |
| .long __data_loc @ r4 |
| .long _sdata @ r5 |
| .long __bss_start @ r6 |
| .long _end @ r7 |
| .long processor_id @ r4 |
| .long __machine_arch_type @ r5 |
| .long __atags_pointer @ r6 |
| #ifdef CONFIG_CPU_CP15 |
| .long cr_alignment @ r7 |
| #else |
| .long 0 @ r7 |
| #endif |
| .long init_thread_union + THREAD_START_SP @ sp |
| .size __mmap_switched_data, . - __mmap_switched_data |
| |
| /* |
| * This provides a C-API version of __lookup_processor_type |
| */ |
| ENTRY(lookup_processor_type) |
| stmfd sp!, {r4 - r6, r9, lr} |
| mov r9, r0 |
| bl __lookup_processor_type |
| mov r0, r5 |
| ldmfd sp!, {r4 - r6, r9, pc} |
| ENDPROC(lookup_processor_type) |
| |
| __FINIT |
| .text |
| |
| /* |
| * Read processor ID register (CP#15, CR0), and look up in the linker-built |
| * supported processor list. Note that we can't use the absolute addresses |
| * for the __proc_info lists since we aren't running with the MMU on |
| * (and therefore, we are not in the correct address space). We have to |
| * calculate the offset. |
| * |
| * r9 = cpuid |
| * Returns: |
| * r3, r4, r6 corrupted |
| * r5 = proc_info pointer in physical address space |
| * r9 = cpuid (preserved) |
| */ |
| __lookup_processor_type: |
| adr r3, __lookup_processor_type_data |
| ldmia r3, {r4 - r6} |
| sub r3, r3, r4 @ get offset between virt&phys |
| add r5, r5, r3 @ convert virt addresses to |
| add r6, r6, r3 @ physical address space |
| 1: ldmia r5, {r3, r4} @ value, mask |
| and r4, r4, r9 @ mask wanted bits |
| teq r3, r4 |
| beq 2f |
| add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) |
| cmp r5, r6 |
| blo 1b |
| mov r5, #0 @ unknown processor |
| 2: mov pc, lr |
| ENDPROC(__lookup_processor_type) |
| |
| /* |
| * Look in <asm/procinfo.h> for information about the __proc_info structure. |
| */ |
| .align 2 |
| .type __lookup_processor_type_data, %object |
| __lookup_processor_type_data: |
| .long . |
| .long __proc_info_begin |
| .long __proc_info_end |
| .size __lookup_processor_type_data, . - __lookup_processor_type_data |
| |
| __error_p: |
| #ifdef CONFIG_DEBUG_LL |
| adr r0, str_p1 |
| bl printascii |
| mov r0, r9 |
| bl printhex8 |
| adr r0, str_p2 |
| bl printascii |
| b __error |
| str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x" |
| str_p2: .asciz ").\n" |
| .align |
| #endif |
| ENDPROC(__error_p) |
| |
| __error: |
| #ifdef CONFIG_ARCH_RPC |
| /* |
| * Turn the screen red on a error - RiscPC only. |
| */ |
| mov r0, #0x02000000 |
| mov r3, #0x11 |
| orr r3, r3, r3, lsl #8 |
| orr r3, r3, r3, lsl #16 |
| str r3, [r0], #4 |
| str r3, [r0], #4 |
| str r3, [r0], #4 |
| str r3, [r0], #4 |
| #endif |
| 1: mov r0, r0 |
| b 1b |
| ENDPROC(__error) |