| /****************************************************************************** |
| * |
| * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. |
| * |
| * Portions of this file are derived from the ipw3945 project, as well |
| * as portions of the ieee80211 subsystem header files. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * James P. Ketrenos <ipw2100-admin@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #include <linux/etherdevice.h> |
| #include <net/mac80211.h> |
| #include <asm/unaligned.h> |
| #include "iwl-eeprom.h" |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-sta.h" |
| #include "iwl-io.h" |
| #include "iwl-calib.h" |
| #include "iwl-helpers.h" |
| /************************** RX-FUNCTIONS ****************************/ |
| /* |
| * Rx theory of operation |
| * |
| * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), |
| * each of which point to Receive Buffers to be filled by the NIC. These get |
| * used not only for Rx frames, but for any command response or notification |
| * from the NIC. The driver and NIC manage the Rx buffers by means |
| * of indexes into the circular buffer. |
| * |
| * Rx Queue Indexes |
| * The host/firmware share two index registers for managing the Rx buffers. |
| * |
| * The READ index maps to the first position that the firmware may be writing |
| * to -- the driver can read up to (but not including) this position and get |
| * good data. |
| * The READ index is managed by the firmware once the card is enabled. |
| * |
| * The WRITE index maps to the last position the driver has read from -- the |
| * position preceding WRITE is the last slot the firmware can place a packet. |
| * |
| * The queue is empty (no good data) if WRITE = READ - 1, and is full if |
| * WRITE = READ. |
| * |
| * During initialization, the host sets up the READ queue position to the first |
| * INDEX position, and WRITE to the last (READ - 1 wrapped) |
| * |
| * When the firmware places a packet in a buffer, it will advance the READ index |
| * and fire the RX interrupt. The driver can then query the READ index and |
| * process as many packets as possible, moving the WRITE index forward as it |
| * resets the Rx queue buffers with new memory. |
| * |
| * The management in the driver is as follows: |
| * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When |
| * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled |
| * to replenish the iwl->rxq->rx_free. |
| * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the |
| * iwl->rxq is replenished and the READ INDEX is updated (updating the |
| * 'processed' and 'read' driver indexes as well) |
| * + A received packet is processed and handed to the kernel network stack, |
| * detached from the iwl->rxq. The driver 'processed' index is updated. |
| * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free |
| * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ |
| * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there |
| * were enough free buffers and RX_STALLED is set it is cleared. |
| * |
| * |
| * Driver sequence: |
| * |
| * iwl_rx_queue_alloc() Allocates rx_free |
| * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls |
| * iwl_rx_queue_restock |
| * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx |
| * queue, updates firmware pointers, and updates |
| * the WRITE index. If insufficient rx_free buffers |
| * are available, schedules iwl_rx_replenish |
| * |
| * -- enable interrupts -- |
| * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the |
| * READ INDEX, detaching the SKB from the pool. |
| * Moves the packet buffer from queue to rx_used. |
| * Calls iwl_rx_queue_restock to refill any empty |
| * slots. |
| * ... |
| * |
| */ |
| |
| /** |
| * iwl_rx_queue_space - Return number of free slots available in queue. |
| */ |
| int iwl_rx_queue_space(const struct iwl_rx_queue *q) |
| { |
| int s = q->read - q->write; |
| if (s <= 0) |
| s += RX_QUEUE_SIZE; |
| /* keep some buffer to not confuse full and empty queue */ |
| s -= 2; |
| if (s < 0) |
| s = 0; |
| return s; |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_space); |
| |
| /** |
| * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue |
| */ |
| int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q) |
| { |
| u32 reg = 0; |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&q->lock, flags); |
| |
| if (q->need_update == 0) |
| goto exit_unlock; |
| |
| /* If power-saving is in use, make sure device is awake */ |
| if (test_bit(STATUS_POWER_PMI, &priv->status)) { |
| reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); |
| |
| if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { |
| iwl_set_bit(priv, CSR_GP_CNTRL, |
| CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); |
| goto exit_unlock; |
| } |
| |
| ret = iwl_grab_nic_access(priv); |
| if (ret) |
| goto exit_unlock; |
| |
| /* Device expects a multiple of 8 */ |
| iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR, |
| q->write & ~0x7); |
| iwl_release_nic_access(priv); |
| |
| /* Else device is assumed to be awake */ |
| } else |
| /* Device expects a multiple of 8 */ |
| iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7); |
| |
| |
| q->need_update = 0; |
| |
| exit_unlock: |
| spin_unlock_irqrestore(&q->lock, flags); |
| return ret; |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr); |
| /** |
| * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr |
| */ |
| static inline __le32 iwl_dma_addr2rbd_ptr(struct iwl_priv *priv, |
| dma_addr_t dma_addr) |
| { |
| return cpu_to_le32((u32)(dma_addr >> 8)); |
| } |
| |
| /** |
| * iwl_rx_queue_restock - refill RX queue from pre-allocated pool |
| * |
| * If there are slots in the RX queue that need to be restocked, |
| * and we have free pre-allocated buffers, fill the ranks as much |
| * as we can, pulling from rx_free. |
| * |
| * This moves the 'write' index forward to catch up with 'processed', and |
| * also updates the memory address in the firmware to reference the new |
| * target buffer. |
| */ |
| int iwl_rx_queue_restock(struct iwl_priv *priv) |
| { |
| struct iwl_rx_queue *rxq = &priv->rxq; |
| struct list_head *element; |
| struct iwl_rx_mem_buffer *rxb; |
| unsigned long flags; |
| int write; |
| int ret = 0; |
| |
| spin_lock_irqsave(&rxq->lock, flags); |
| write = rxq->write & ~0x7; |
| while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { |
| /* Get next free Rx buffer, remove from free list */ |
| element = rxq->rx_free.next; |
| rxb = list_entry(element, struct iwl_rx_mem_buffer, list); |
| list_del(element); |
| |
| /* Point to Rx buffer via next RBD in circular buffer */ |
| rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr); |
| rxq->queue[rxq->write] = rxb; |
| rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; |
| rxq->free_count--; |
| } |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| /* If the pre-allocated buffer pool is dropping low, schedule to |
| * refill it */ |
| if (rxq->free_count <= RX_LOW_WATERMARK) |
| queue_work(priv->workqueue, &priv->rx_replenish); |
| |
| |
| /* If we've added more space for the firmware to place data, tell it. |
| * Increment device's write pointer in multiples of 8. */ |
| if ((write != (rxq->write & ~0x7)) |
| || (abs(rxq->write - rxq->read) > 7)) { |
| spin_lock_irqsave(&rxq->lock, flags); |
| rxq->need_update = 1; |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| ret = iwl_rx_queue_update_write_ptr(priv, rxq); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_restock); |
| |
| |
| /** |
| * iwl_rx_replenish - Move all used packet from rx_used to rx_free |
| * |
| * When moving to rx_free an SKB is allocated for the slot. |
| * |
| * Also restock the Rx queue via iwl_rx_queue_restock. |
| * This is called as a scheduled work item (except for during initialization) |
| */ |
| void iwl_rx_allocate(struct iwl_priv *priv) |
| { |
| struct iwl_rx_queue *rxq = &priv->rxq; |
| struct list_head *element; |
| struct iwl_rx_mem_buffer *rxb; |
| unsigned long flags; |
| spin_lock_irqsave(&rxq->lock, flags); |
| while (!list_empty(&rxq->rx_used)) { |
| element = rxq->rx_used.next; |
| rxb = list_entry(element, struct iwl_rx_mem_buffer, list); |
| |
| /* Alloc a new receive buffer */ |
| rxb->skb = alloc_skb(priv->hw_params.rx_buf_size, |
| __GFP_NOWARN | GFP_ATOMIC); |
| if (!rxb->skb) { |
| if (net_ratelimit()) |
| printk(KERN_CRIT DRV_NAME |
| ": Can not allocate SKB buffers\n"); |
| /* We don't reschedule replenish work here -- we will |
| * call the restock method and if it still needs |
| * more buffers it will schedule replenish */ |
| break; |
| } |
| priv->alloc_rxb_skb++; |
| list_del(element); |
| |
| /* Get physical address of RB/SKB */ |
| rxb->dma_addr = |
| pci_map_single(priv->pci_dev, rxb->skb->data, |
| priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); |
| list_add_tail(&rxb->list, &rxq->rx_free); |
| rxq->free_count++; |
| } |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| } |
| EXPORT_SYMBOL(iwl_rx_allocate); |
| |
| void iwl_rx_replenish(struct iwl_priv *priv) |
| { |
| unsigned long flags; |
| |
| iwl_rx_allocate(priv); |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| iwl_rx_queue_restock(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| EXPORT_SYMBOL(iwl_rx_replenish); |
| |
| |
| /* Assumes that the skb field of the buffers in 'pool' is kept accurate. |
| * If an SKB has been detached, the POOL needs to have its SKB set to NULL |
| * This free routine walks the list of POOL entries and if SKB is set to |
| * non NULL it is unmapped and freed |
| */ |
| void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) |
| { |
| int i; |
| for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { |
| if (rxq->pool[i].skb != NULL) { |
| pci_unmap_single(priv->pci_dev, |
| rxq->pool[i].dma_addr, |
| priv->hw_params.rx_buf_size, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb(rxq->pool[i].skb); |
| } |
| } |
| |
| pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd, |
| rxq->dma_addr); |
| rxq->bd = NULL; |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_free); |
| |
| int iwl_rx_queue_alloc(struct iwl_priv *priv) |
| { |
| struct iwl_rx_queue *rxq = &priv->rxq; |
| struct pci_dev *dev = priv->pci_dev; |
| int i; |
| |
| spin_lock_init(&rxq->lock); |
| INIT_LIST_HEAD(&rxq->rx_free); |
| INIT_LIST_HEAD(&rxq->rx_used); |
| |
| /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */ |
| rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr); |
| if (!rxq->bd) |
| return -ENOMEM; |
| |
| /* Fill the rx_used queue with _all_ of the Rx buffers */ |
| for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) |
| list_add_tail(&rxq->pool[i].list, &rxq->rx_used); |
| |
| /* Set us so that we have processed and used all buffers, but have |
| * not restocked the Rx queue with fresh buffers */ |
| rxq->read = rxq->write = 0; |
| rxq->free_count = 0; |
| rxq->need_update = 0; |
| return 0; |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_alloc); |
| |
| void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) |
| { |
| unsigned long flags; |
| int i; |
| spin_lock_irqsave(&rxq->lock, flags); |
| INIT_LIST_HEAD(&rxq->rx_free); |
| INIT_LIST_HEAD(&rxq->rx_used); |
| /* Fill the rx_used queue with _all_ of the Rx buffers */ |
| for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { |
| /* In the reset function, these buffers may have been allocated |
| * to an SKB, so we need to unmap and free potential storage */ |
| if (rxq->pool[i].skb != NULL) { |
| pci_unmap_single(priv->pci_dev, |
| rxq->pool[i].dma_addr, |
| priv->hw_params.rx_buf_size, |
| PCI_DMA_FROMDEVICE); |
| priv->alloc_rxb_skb--; |
| dev_kfree_skb(rxq->pool[i].skb); |
| rxq->pool[i].skb = NULL; |
| } |
| list_add_tail(&rxq->pool[i].list, &rxq->rx_used); |
| } |
| |
| /* Set us so that we have processed and used all buffers, but have |
| * not restocked the Rx queue with fresh buffers */ |
| rxq->read = rxq->write = 0; |
| rxq->free_count = 0; |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_reset); |
| |
| int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) |
| { |
| int ret; |
| unsigned long flags; |
| unsigned int rb_size; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| ret = iwl_grab_nic_access(priv); |
| if (ret) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return ret; |
| } |
| |
| if (priv->cfg->mod_params->amsdu_size_8K) |
| rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; |
| else |
| rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; |
| |
| /* Stop Rx DMA */ |
| iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); |
| |
| /* Reset driver's Rx queue write index */ |
| iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); |
| |
| /* Tell device where to find RBD circular buffer in DRAM */ |
| iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, |
| rxq->dma_addr >> 8); |
| |
| /* Tell device where in DRAM to update its Rx status */ |
| iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, |
| (priv->shared_phys + priv->rb_closed_offset) >> 4); |
| |
| /* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */ |
| iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, |
| FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | |
| FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | |
| rb_size | |
| /* 0x10 << 4 | */ |
| (RX_QUEUE_SIZE_LOG << |
| FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT)); |
| |
| /* |
| * iwl_write32(priv,CSR_INT_COAL_REG,0); |
| */ |
| |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| |
| int iwl_rxq_stop(struct iwl_priv *priv) |
| { |
| int ret; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| ret = iwl_grab_nic_access(priv); |
| if (unlikely(ret)) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return ret; |
| } |
| |
| /* stop Rx DMA */ |
| iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); |
| ret = iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG, |
| (1 << 24), 1000); |
| if (ret < 0) |
| IWL_ERROR("Can't stop Rx DMA.\n"); |
| |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(iwl_rxq_stop); |
| |
| void iwl_rx_missed_beacon_notif(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| |
| { |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| struct iwl4965_missed_beacon_notif *missed_beacon; |
| |
| missed_beacon = &pkt->u.missed_beacon; |
| if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) { |
| IWL_DEBUG_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", |
| le32_to_cpu(missed_beacon->consequtive_missed_beacons), |
| le32_to_cpu(missed_beacon->total_missed_becons), |
| le32_to_cpu(missed_beacon->num_recvd_beacons), |
| le32_to_cpu(missed_beacon->num_expected_beacons)); |
| if (!test_bit(STATUS_SCANNING, &priv->status)) |
| iwl_init_sensitivity(priv); |
| } |
| } |
| EXPORT_SYMBOL(iwl_rx_missed_beacon_notif); |
| |
| int iwl_rx_agg_start(struct iwl_priv *priv, const u8 *addr, int tid, u16 ssn) |
| { |
| unsigned long flags; |
| int sta_id; |
| |
| sta_id = iwl_find_station(priv, addr); |
| if (sta_id == IWL_INVALID_STATION) |
| return -ENXIO; |
| |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| priv->stations[sta_id].sta.station_flags_msk = 0; |
| priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; |
| priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid; |
| priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); |
| priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, |
| CMD_ASYNC); |
| } |
| EXPORT_SYMBOL(iwl_rx_agg_start); |
| |
| int iwl_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid) |
| { |
| unsigned long flags; |
| int sta_id; |
| |
| sta_id = iwl_find_station(priv, addr); |
| if (sta_id == IWL_INVALID_STATION) |
| return -ENXIO; |
| |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| priv->stations[sta_id].sta.station_flags_msk = 0; |
| priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; |
| priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid; |
| priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, |
| CMD_ASYNC); |
| } |
| EXPORT_SYMBOL(iwl_rx_agg_stop); |
| |
| |
| /* Calculate noise level, based on measurements during network silence just |
| * before arriving beacon. This measurement can be done only if we know |
| * exactly when to expect beacons, therefore only when we're associated. */ |
| static void iwl_rx_calc_noise(struct iwl_priv *priv) |
| { |
| struct statistics_rx_non_phy *rx_info |
| = &(priv->statistics.rx.general); |
| int num_active_rx = 0; |
| int total_silence = 0; |
| int bcn_silence_a = |
| le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; |
| int bcn_silence_b = |
| le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; |
| int bcn_silence_c = |
| le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; |
| |
| if (bcn_silence_a) { |
| total_silence += bcn_silence_a; |
| num_active_rx++; |
| } |
| if (bcn_silence_b) { |
| total_silence += bcn_silence_b; |
| num_active_rx++; |
| } |
| if (bcn_silence_c) { |
| total_silence += bcn_silence_c; |
| num_active_rx++; |
| } |
| |
| /* Average among active antennas */ |
| if (num_active_rx) |
| priv->last_rx_noise = (total_silence / num_active_rx) - 107; |
| else |
| priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; |
| |
| IWL_DEBUG_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", |
| bcn_silence_a, bcn_silence_b, bcn_silence_c, |
| priv->last_rx_noise); |
| } |
| |
| #define REG_RECALIB_PERIOD (60) |
| |
| void iwl_rx_statistics(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| int change; |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| |
| IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n", |
| (int)sizeof(priv->statistics), pkt->len); |
| |
| change = ((priv->statistics.general.temperature != |
| pkt->u.stats.general.temperature) || |
| ((priv->statistics.flag & |
| STATISTICS_REPLY_FLG_FAT_MODE_MSK) != |
| (pkt->u.stats.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK))); |
| |
| memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics)); |
| |
| set_bit(STATUS_STATISTICS, &priv->status); |
| |
| /* Reschedule the statistics timer to occur in |
| * REG_RECALIB_PERIOD seconds to ensure we get a |
| * thermal update even if the uCode doesn't give |
| * us one */ |
| mod_timer(&priv->statistics_periodic, jiffies + |
| msecs_to_jiffies(REG_RECALIB_PERIOD * 1000)); |
| |
| if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && |
| (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { |
| iwl_rx_calc_noise(priv); |
| queue_work(priv->workqueue, &priv->run_time_calib_work); |
| } |
| |
| iwl_leds_background(priv); |
| |
| if (priv->cfg->ops->lib->temperature && change) |
| priv->cfg->ops->lib->temperature(priv); |
| } |
| EXPORT_SYMBOL(iwl_rx_statistics); |
| |
| #define PERFECT_RSSI (-20) /* dBm */ |
| #define WORST_RSSI (-95) /* dBm */ |
| #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) |
| |
| /* Calculate an indication of rx signal quality (a percentage, not dBm!). |
| * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info |
| * about formulas used below. */ |
| static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm) |
| { |
| int sig_qual; |
| int degradation = PERFECT_RSSI - rssi_dbm; |
| |
| /* If we get a noise measurement, use signal-to-noise ratio (SNR) |
| * as indicator; formula is (signal dbm - noise dbm). |
| * SNR at or above 40 is a great signal (100%). |
| * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. |
| * Weakest usable signal is usually 10 - 15 dB SNR. */ |
| if (noise_dbm) { |
| if (rssi_dbm - noise_dbm >= 40) |
| return 100; |
| else if (rssi_dbm < noise_dbm) |
| return 0; |
| sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; |
| |
| /* Else use just the signal level. |
| * This formula is a least squares fit of data points collected and |
| * compared with a reference system that had a percentage (%) display |
| * for signal quality. */ |
| } else |
| sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * |
| (15 * RSSI_RANGE + 62 * degradation)) / |
| (RSSI_RANGE * RSSI_RANGE); |
| |
| if (sig_qual > 100) |
| sig_qual = 100; |
| else if (sig_qual < 1) |
| sig_qual = 0; |
| |
| return sig_qual; |
| } |
| |
| #ifdef CONFIG_IWLWIFI_DEBUG |
| |
| /** |
| * iwl_dbg_report_frame - dump frame to syslog during debug sessions |
| * |
| * You may hack this function to show different aspects of received frames, |
| * including selective frame dumps. |
| * group100 parameter selects whether to show 1 out of 100 good frames. |
| * |
| * TODO: This was originally written for 3945, need to audit for |
| * proper operation with 4965. |
| */ |
| static void iwl_dbg_report_frame(struct iwl_priv *priv, |
| struct iwl_rx_packet *pkt, |
| struct ieee80211_hdr *header, int group100) |
| { |
| u32 to_us; |
| u32 print_summary = 0; |
| u32 print_dump = 0; /* set to 1 to dump all frames' contents */ |
| u32 hundred = 0; |
| u32 dataframe = 0; |
| __le16 fc; |
| u16 seq_ctl; |
| u16 channel; |
| u16 phy_flags; |
| int rate_sym; |
| u16 length; |
| u16 status; |
| u16 bcn_tmr; |
| u32 tsf_low; |
| u64 tsf; |
| u8 rssi; |
| u8 agc; |
| u16 sig_avg; |
| u16 noise_diff; |
| struct iwl4965_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); |
| struct iwl4965_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); |
| struct iwl4965_rx_frame_end *rx_end = IWL_RX_END(pkt); |
| u8 *data = IWL_RX_DATA(pkt); |
| |
| if (likely(!(priv->debug_level & IWL_DL_RX))) |
| return; |
| |
| /* MAC header */ |
| fc = header->frame_control; |
| seq_ctl = le16_to_cpu(header->seq_ctrl); |
| |
| /* metadata */ |
| channel = le16_to_cpu(rx_hdr->channel); |
| phy_flags = le16_to_cpu(rx_hdr->phy_flags); |
| rate_sym = rx_hdr->rate; |
| length = le16_to_cpu(rx_hdr->len); |
| |
| /* end-of-frame status and timestamp */ |
| status = le32_to_cpu(rx_end->status); |
| bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp); |
| tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff; |
| tsf = le64_to_cpu(rx_end->timestamp); |
| |
| /* signal statistics */ |
| rssi = rx_stats->rssi; |
| agc = rx_stats->agc; |
| sig_avg = le16_to_cpu(rx_stats->sig_avg); |
| noise_diff = le16_to_cpu(rx_stats->noise_diff); |
| |
| to_us = !compare_ether_addr(header->addr1, priv->mac_addr); |
| |
| /* if data frame is to us and all is good, |
| * (optionally) print summary for only 1 out of every 100 */ |
| if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) == |
| cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) { |
| dataframe = 1; |
| if (!group100) |
| print_summary = 1; /* print each frame */ |
| else if (priv->framecnt_to_us < 100) { |
| priv->framecnt_to_us++; |
| print_summary = 0; |
| } else { |
| priv->framecnt_to_us = 0; |
| print_summary = 1; |
| hundred = 1; |
| } |
| } else { |
| /* print summary for all other frames */ |
| print_summary = 1; |
| } |
| |
| if (print_summary) { |
| char *title; |
| int rate_idx; |
| u32 bitrate; |
| |
| if (hundred) |
| title = "100Frames"; |
| else if (ieee80211_has_retry(fc)) |
| title = "Retry"; |
| else if (ieee80211_is_assoc_resp(fc)) |
| title = "AscRsp"; |
| else if (ieee80211_is_reassoc_resp(fc)) |
| title = "RasRsp"; |
| else if (ieee80211_is_probe_resp(fc)) { |
| title = "PrbRsp"; |
| print_dump = 1; /* dump frame contents */ |
| } else if (ieee80211_is_beacon(fc)) { |
| title = "Beacon"; |
| print_dump = 1; /* dump frame contents */ |
| } else if (ieee80211_is_atim(fc)) |
| title = "ATIM"; |
| else if (ieee80211_is_auth(fc)) |
| title = "Auth"; |
| else if (ieee80211_is_deauth(fc)) |
| title = "DeAuth"; |
| else if (ieee80211_is_disassoc(fc)) |
| title = "DisAssoc"; |
| else |
| title = "Frame"; |
| |
| rate_idx = iwl_hwrate_to_plcp_idx(rate_sym); |
| if (unlikely(rate_idx == -1)) |
| bitrate = 0; |
| else |
| bitrate = iwl_rates[rate_idx].ieee / 2; |
| |
| /* print frame summary. |
| * MAC addresses show just the last byte (for brevity), |
| * but you can hack it to show more, if you'd like to. */ |
| if (dataframe) |
| IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, " |
| "len=%u, rssi=%d, chnl=%d, rate=%u, \n", |
| title, le16_to_cpu(fc), header->addr1[5], |
| length, rssi, channel, bitrate); |
| else { |
| /* src/dst addresses assume managed mode */ |
| IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, " |
| "src=0x%02x, rssi=%u, tim=%lu usec, " |
| "phy=0x%02x, chnl=%d\n", |
| title, le16_to_cpu(fc), header->addr1[5], |
| header->addr3[5], rssi, |
| tsf_low - priv->scan_start_tsf, |
| phy_flags, channel); |
| } |
| } |
| if (print_dump) |
| iwl_print_hex_dump(priv, IWL_DL_RX, data, length); |
| } |
| #else |
| static inline void iwl_dbg_report_frame(struct iwl_priv *priv, |
| struct iwl_rx_packet *pkt, |
| struct ieee80211_hdr *header, |
| int group100) |
| { |
| } |
| #endif |
| |
| static void iwl_add_radiotap(struct iwl_priv *priv, |
| struct sk_buff *skb, |
| struct iwl_rx_phy_res *rx_start, |
| struct ieee80211_rx_status *stats, |
| u32 ampdu_status) |
| { |
| s8 signal = stats->signal; |
| s8 noise = 0; |
| int rate = stats->rate_idx; |
| u64 tsf = stats->mactime; |
| __le16 antenna; |
| __le16 phy_flags_hw = rx_start->phy_flags; |
| struct iwl4965_rt_rx_hdr { |
| struct ieee80211_radiotap_header rt_hdr; |
| __le64 rt_tsf; /* TSF */ |
| u8 rt_flags; /* radiotap packet flags */ |
| u8 rt_rate; /* rate in 500kb/s */ |
| __le16 rt_channelMHz; /* channel in MHz */ |
| __le16 rt_chbitmask; /* channel bitfield */ |
| s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ |
| s8 rt_dbmnoise; |
| u8 rt_antenna; /* antenna number */ |
| } __attribute__ ((packed)) *iwl4965_rt; |
| |
| /* TODO: We won't have enough headroom for HT frames. Fix it later. */ |
| if (skb_headroom(skb) < sizeof(*iwl4965_rt)) { |
| if (net_ratelimit()) |
| printk(KERN_ERR "not enough headroom [%d] for " |
| "radiotap head [%zd]\n", |
| skb_headroom(skb), sizeof(*iwl4965_rt)); |
| return; |
| } |
| |
| /* put radiotap header in front of 802.11 header and data */ |
| iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt)); |
| |
| /* initialise radiotap header */ |
| iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; |
| iwl4965_rt->rt_hdr.it_pad = 0; |
| |
| /* total header + data */ |
| put_unaligned_le16(sizeof(*iwl4965_rt), &iwl4965_rt->rt_hdr.it_len); |
| |
| /* Indicate all the fields we add to the radiotap header */ |
| put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) | |
| (1 << IEEE80211_RADIOTAP_FLAGS) | |
| (1 << IEEE80211_RADIOTAP_RATE) | |
| (1 << IEEE80211_RADIOTAP_CHANNEL) | |
| (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | |
| (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | |
| (1 << IEEE80211_RADIOTAP_ANTENNA), |
| &(iwl4965_rt->rt_hdr.it_present)); |
| |
| /* Zero the flags, we'll add to them as we go */ |
| iwl4965_rt->rt_flags = 0; |
| |
| put_unaligned_le64(tsf, &iwl4965_rt->rt_tsf); |
| |
| iwl4965_rt->rt_dbmsignal = signal; |
| iwl4965_rt->rt_dbmnoise = noise; |
| |
| /* Convert the channel frequency and set the flags */ |
| put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz); |
| if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) |
| put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ, |
| &iwl4965_rt->rt_chbitmask); |
| else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) |
| put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, |
| &iwl4965_rt->rt_chbitmask); |
| else /* 802.11g */ |
| put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, |
| &iwl4965_rt->rt_chbitmask); |
| |
| if (rate == -1) |
| iwl4965_rt->rt_rate = 0; |
| else |
| iwl4965_rt->rt_rate = iwl_rates[rate].ieee; |
| |
| /* |
| * "antenna number" |
| * |
| * It seems that the antenna field in the phy flags value |
| * is actually a bitfield. This is undefined by radiotap, |
| * it wants an actual antenna number but I always get "7" |
| * for most legacy frames I receive indicating that the |
| * same frame was received on all three RX chains. |
| * |
| * I think this field should be removed in favour of a |
| * new 802.11n radiotap field "RX chains" that is defined |
| * as a bitmask. |
| */ |
| antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; |
| iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4; |
| |
| /* set the preamble flag if appropriate */ |
| if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) |
| iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; |
| |
| stats->flag |= RX_FLAG_RADIOTAP; |
| } |
| |
| static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len) |
| { |
| /* 0 - mgmt, 1 - cnt, 2 - data */ |
| int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2; |
| priv->rx_stats[idx].cnt++; |
| priv->rx_stats[idx].bytes += len; |
| } |
| |
| /* |
| * returns non-zero if packet should be dropped |
| */ |
| static int iwl_set_decrypted_flag(struct iwl_priv *priv, |
| struct ieee80211_hdr *hdr, |
| u32 decrypt_res, |
| struct ieee80211_rx_status *stats) |
| { |
| u16 fc = le16_to_cpu(hdr->frame_control); |
| |
| if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) |
| return 0; |
| |
| if (!(fc & IEEE80211_FCTL_PROTECTED)) |
| return 0; |
| |
| IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res); |
| switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { |
| case RX_RES_STATUS_SEC_TYPE_TKIP: |
| /* The uCode has got a bad phase 1 Key, pushes the packet. |
| * Decryption will be done in SW. */ |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_BAD_KEY_TTAK) |
| break; |
| |
| case RX_RES_STATUS_SEC_TYPE_WEP: |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_BAD_ICV_MIC) { |
| /* bad ICV, the packet is destroyed since the |
| * decryption is inplace, drop it */ |
| IWL_DEBUG_RX("Packet destroyed\n"); |
| return -1; |
| } |
| case RX_RES_STATUS_SEC_TYPE_CCMP: |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_DECRYPT_OK) { |
| IWL_DEBUG_RX("hw decrypt successfully!!!\n"); |
| stats->flag |= RX_FLAG_DECRYPTED; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| static u32 iwl_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) |
| { |
| u32 decrypt_out = 0; |
| |
| if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == |
| RX_RES_STATUS_STATION_FOUND) |
| decrypt_out |= (RX_RES_STATUS_STATION_FOUND | |
| RX_RES_STATUS_NO_STATION_INFO_MISMATCH); |
| |
| decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); |
| |
| /* packet was not encrypted */ |
| if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == |
| RX_RES_STATUS_SEC_TYPE_NONE) |
| return decrypt_out; |
| |
| /* packet was encrypted with unknown alg */ |
| if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == |
| RX_RES_STATUS_SEC_TYPE_ERR) |
| return decrypt_out; |
| |
| /* decryption was not done in HW */ |
| if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != |
| RX_MPDU_RES_STATUS_DEC_DONE_MSK) |
| return decrypt_out; |
| |
| switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { |
| |
| case RX_RES_STATUS_SEC_TYPE_CCMP: |
| /* alg is CCM: check MIC only */ |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) |
| /* Bad MIC */ |
| decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; |
| else |
| decrypt_out |= RX_RES_STATUS_DECRYPT_OK; |
| |
| break; |
| |
| case RX_RES_STATUS_SEC_TYPE_TKIP: |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { |
| /* Bad TTAK */ |
| decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; |
| break; |
| } |
| /* fall through if TTAK OK */ |
| default: |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) |
| decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; |
| else |
| decrypt_out |= RX_RES_STATUS_DECRYPT_OK; |
| break; |
| }; |
| |
| IWL_DEBUG_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", |
| decrypt_in, decrypt_out); |
| |
| return decrypt_out; |
| } |
| |
| static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, |
| int include_phy, |
| struct iwl_rx_mem_buffer *rxb, |
| struct ieee80211_rx_status *stats) |
| { |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| struct iwl_rx_phy_res *rx_start = (include_phy) ? |
| (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : NULL; |
| struct ieee80211_hdr *hdr; |
| u16 len; |
| __le32 *rx_end; |
| unsigned int skblen; |
| u32 ampdu_status; |
| u32 ampdu_status_legacy; |
| |
| if (!include_phy && priv->last_phy_res[0]) |
| rx_start = (struct iwl_rx_phy_res *)&priv->last_phy_res[1]; |
| |
| if (!rx_start) { |
| IWL_ERROR("MPDU frame without a PHY data\n"); |
| return; |
| } |
| if (include_phy) { |
| hdr = (struct ieee80211_hdr *)((u8 *) &rx_start[1] + |
| rx_start->cfg_phy_cnt); |
| |
| len = le16_to_cpu(rx_start->byte_count); |
| |
| rx_end = (__le32 *)((u8 *) &pkt->u.raw[0] + |
| sizeof(struct iwl_rx_phy_res) + |
| rx_start->cfg_phy_cnt + len); |
| |
| } else { |
| struct iwl4965_rx_mpdu_res_start *amsdu = |
| (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; |
| |
| hdr = (struct ieee80211_hdr *)(pkt->u.raw + |
| sizeof(struct iwl4965_rx_mpdu_res_start)); |
| len = le16_to_cpu(amsdu->byte_count); |
| rx_start->byte_count = amsdu->byte_count; |
| rx_end = (__le32 *) (((u8 *) hdr) + len); |
| } |
| |
| ampdu_status = le32_to_cpu(*rx_end); |
| skblen = ((u8 *) rx_end - (u8 *) &pkt->u.raw[0]) + sizeof(u32); |
| |
| if (!include_phy) { |
| /* New status scheme, need to translate */ |
| ampdu_status_legacy = ampdu_status; |
| ampdu_status = iwl_translate_rx_status(priv, ampdu_status); |
| } |
| |
| /* start from MAC */ |
| skb_reserve(rxb->skb, (void *)hdr - (void *)pkt); |
| skb_put(rxb->skb, len); /* end where data ends */ |
| |
| /* We only process data packets if the interface is open */ |
| if (unlikely(!priv->is_open)) { |
| IWL_DEBUG_DROP_LIMIT |
| ("Dropping packet while interface is not open.\n"); |
| return; |
| } |
| |
| hdr = (struct ieee80211_hdr *)rxb->skb->data; |
| |
| /* in case of HW accelerated crypto and bad decryption, drop */ |
| if (!priv->hw_params.sw_crypto && |
| iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats)) |
| return; |
| |
| if (priv->add_radiotap) |
| iwl_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status); |
| |
| iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len); |
| ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); |
| priv->alloc_rxb_skb--; |
| rxb->skb = NULL; |
| } |
| |
| /* Calc max signal level (dBm) among 3 possible receivers */ |
| static inline int iwl_calc_rssi(struct iwl_priv *priv, |
| struct iwl_rx_phy_res *rx_resp) |
| { |
| return priv->cfg->ops->utils->calc_rssi(priv, rx_resp); |
| } |
| |
| |
| static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK; |
| priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; |
| priv->stations[sta_id].sta.sta.modify_mask = 0; |
| priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); |
| } |
| |
| static void iwl_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr) |
| { |
| /* FIXME: need locking over ps_status ??? */ |
| u8 sta_id = iwl_find_station(priv, addr); |
| |
| if (sta_id != IWL_INVALID_STATION) { |
| u8 sta_awake = priv->stations[sta_id]. |
| ps_status == STA_PS_STATUS_WAKE; |
| |
| if (sta_awake && ps_bit) |
| priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP; |
| else if (!sta_awake && !ps_bit) { |
| iwl_sta_modify_ps_wake(priv, sta_id); |
| priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE; |
| } |
| } |
| } |
| |
| /* This is necessary only for a number of statistics, see the caller. */ |
| static int iwl_is_network_packet(struct iwl_priv *priv, |
| struct ieee80211_hdr *header) |
| { |
| /* Filter incoming packets to determine if they are targeted toward |
| * this network, discarding packets coming from ourselves */ |
| switch (priv->iw_mode) { |
| case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ |
| /* packets to our IBSS update information */ |
| return !compare_ether_addr(header->addr3, priv->bssid); |
| case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ |
| /* packets to our IBSS update information */ |
| return !compare_ether_addr(header->addr2, priv->bssid); |
| default: |
| return 1; |
| } |
| } |
| |
| /* Called for REPLY_RX (legacy ABG frames), or |
| * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ |
| void iwl_rx_reply_rx(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct ieee80211_hdr *header; |
| struct ieee80211_rx_status rx_status; |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| /* Use phy data (Rx signal strength, etc.) contained within |
| * this rx packet for legacy frames, |
| * or phy data cached from REPLY_RX_PHY_CMD for HT frames. */ |
| int include_phy = (pkt->hdr.cmd == REPLY_RX); |
| struct iwl_rx_phy_res *rx_start = (include_phy) ? |
| (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : |
| (struct iwl_rx_phy_res *)&priv->last_phy_res[1]; |
| __le32 *rx_end; |
| unsigned int len = 0; |
| u16 fc; |
| u8 network_packet; |
| |
| rx_status.mactime = le64_to_cpu(rx_start->timestamp); |
| rx_status.freq = |
| ieee80211_channel_to_frequency(le16_to_cpu(rx_start->channel)); |
| rx_status.band = (rx_start->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? |
| IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; |
| rx_status.rate_idx = |
| iwl_hwrate_to_plcp_idx(le32_to_cpu(rx_start->rate_n_flags)); |
| if (rx_status.band == IEEE80211_BAND_5GHZ) |
| rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; |
| |
| rx_status.antenna = 0; |
| rx_status.flag = 0; |
| rx_status.flag |= RX_FLAG_TSFT; |
| |
| if ((unlikely(rx_start->cfg_phy_cnt > 20))) { |
| IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n", |
| rx_start->cfg_phy_cnt); |
| return; |
| } |
| |
| if (!include_phy) { |
| if (priv->last_phy_res[0]) |
| rx_start = (struct iwl_rx_phy_res *) |
| &priv->last_phy_res[1]; |
| else |
| rx_start = NULL; |
| } |
| |
| if (!rx_start) { |
| IWL_ERROR("MPDU frame without a PHY data\n"); |
| return; |
| } |
| |
| if (include_phy) { |
| header = (struct ieee80211_hdr *)((u8 *) &rx_start[1] |
| + rx_start->cfg_phy_cnt); |
| |
| len = le16_to_cpu(rx_start->byte_count); |
| rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt + |
| sizeof(struct iwl_rx_phy_res) + len); |
| } else { |
| struct iwl4965_rx_mpdu_res_start *amsdu = |
| (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; |
| |
| header = (void *)(pkt->u.raw + |
| sizeof(struct iwl4965_rx_mpdu_res_start)); |
| len = le16_to_cpu(amsdu->byte_count); |
| rx_end = (__le32 *) (pkt->u.raw + |
| sizeof(struct iwl4965_rx_mpdu_res_start) + len); |
| } |
| |
| if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) || |
| !(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) { |
| IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", |
| le32_to_cpu(*rx_end)); |
| return; |
| } |
| |
| priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp); |
| |
| /* Find max signal strength (dBm) among 3 antenna/receiver chains */ |
| rx_status.signal = iwl_calc_rssi(priv, rx_start); |
| |
| /* Meaningful noise values are available only from beacon statistics, |
| * which are gathered only when associated, and indicate noise |
| * only for the associated network channel ... |
| * Ignore these noise values while scanning (other channels) */ |
| if (iwl_is_associated(priv) && |
| !test_bit(STATUS_SCANNING, &priv->status)) { |
| rx_status.noise = priv->last_rx_noise; |
| rx_status.qual = iwl_calc_sig_qual(rx_status.signal, |
| rx_status.noise); |
| } else { |
| rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE; |
| rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0); |
| } |
| |
| /* Reset beacon noise level if not associated. */ |
| if (!iwl_is_associated(priv)) |
| priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; |
| |
| /* Set "1" to report good data frames in groups of 100 */ |
| /* FIXME: need to optimze the call: */ |
| iwl_dbg_report_frame(priv, pkt, header, 1); |
| |
| IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n", |
| rx_status.signal, rx_status.noise, rx_status.signal, |
| (unsigned long long)rx_status.mactime); |
| |
| /* Take shortcut when only in monitor mode */ |
| if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { |
| iwl_pass_packet_to_mac80211(priv, include_phy, |
| rxb, &rx_status); |
| return; |
| } |
| |
| network_packet = iwl_is_network_packet(priv, header); |
| if (network_packet) { |
| priv->last_rx_rssi = rx_status.signal; |
| priv->last_beacon_time = priv->ucode_beacon_time; |
| priv->last_tsf = le64_to_cpu(rx_start->timestamp); |
| } |
| |
| fc = le16_to_cpu(header->frame_control); |
| switch (fc & IEEE80211_FCTL_FTYPE) { |
| case IEEE80211_FTYPE_MGMT: |
| case IEEE80211_FTYPE_DATA: |
| if (priv->iw_mode == IEEE80211_IF_TYPE_AP) |
| iwl_update_ps_mode(priv, fc & IEEE80211_FCTL_PM, |
| header->addr2); |
| /* fall through */ |
| default: |
| iwl_pass_packet_to_mac80211(priv, include_phy, rxb, |
| &rx_status); |
| break; |
| |
| } |
| } |
| EXPORT_SYMBOL(iwl_rx_reply_rx); |
| |
| /* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). |
| * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ |
| void iwl_rx_reply_rx_phy(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| priv->last_phy_res[0] = 1; |
| memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]), |
| sizeof(struct iwl_rx_phy_res)); |
| } |
| EXPORT_SYMBOL(iwl_rx_reply_rx_phy); |