| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * Copyright (C) 2012 The CyanogenMod Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #include <errno.h> |
| #include <string.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| |
| #define LOG_TAG "S5PC110 PowerHAL" |
| #include <utils/Log.h> |
| |
| #include <hardware/hardware.h> |
| #include <hardware/power.h> |
| |
| #define SCALING_GOVERNOR_PATH "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor" |
| #define BOOSTPULSE_ONDEMAND "/sys/devices/system/cpu/cpufreq/ondemand/boostpulse" |
| #define BOOSTPULSE_INTERACTIVE "/sys/devices/system/cpu/cpufreq/interactive/boostpulse" |
| #define TIMER_RATE_SCREEN_ON "30000" |
| #define TIMER_RATE_SCREEN_OFF "150000" |
| |
| struct s5pc110_power_module { |
| struct power_module base; |
| pthread_mutex_t lock; |
| int boostpulse_fd; |
| int boostpulse_warned; |
| }; |
| |
| static char governor[20]; |
| |
| static int sysfs_read(char *path, char *s, int num_bytes) |
| { |
| char buf[80]; |
| int count; |
| int ret = 0; |
| int fd = open(path, O_RDONLY); |
| |
| if (fd < 0) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error opening %s: %s\n", path, buf); |
| |
| return -1; |
| } |
| |
| if ((count = read(fd, s, num_bytes - 1)) < 0) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error writing to %s: %s\n", path, buf); |
| |
| ret = -1; |
| } else { |
| s[count] = '\0'; |
| } |
| |
| close(fd); |
| |
| return ret; |
| } |
| |
| static void sysfs_write(char *path, char *s) |
| { |
| char buf[80]; |
| int len; |
| int fd = open(path, O_WRONLY); |
| |
| if (fd < 0) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error opening %s: %s\n", path, buf); |
| return; |
| } |
| |
| len = write(fd, s, strlen(s)); |
| if (len < 0) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error writing to %s: %s\n", path, buf); |
| } |
| |
| close(fd); |
| } |
| |
| static int get_scaling_governor() { |
| if (sysfs_read(SCALING_GOVERNOR_PATH, governor, |
| sizeof(governor)) == -1) { |
| // Can't obtain the scaling governor. Return. |
| return -1; |
| } else { |
| // Strip newline at the end. |
| int len = strlen(governor); |
| |
| len--; |
| |
| while (len >= 0 && (governor[len] == '\n' || governor[len] == '\r')) |
| governor[len--] = '\0'; |
| } |
| |
| return 0; |
| } |
| |
| static void s5pc110_power_set_interactive(struct power_module *module, int on) |
| { |
| if (strncmp(governor, "interactive", 11) == 0) |
| sysfs_write("/sys/devices/system/cpu/cpufreq/interactive/timer_rate", |
| on ? TIMER_RATE_SCREEN_ON : TIMER_RATE_SCREEN_OFF); |
| } |
| |
| static void configure_governor() |
| { |
| s5pc110_power_set_interactive(NULL, 1); |
| |
| if (strncmp(governor, "ondemand", 8) == 0) { |
| sysfs_write("/sys/devices/system/cpu/cpufreq/ondemand/up_threshold", "95"); |
| sysfs_write("/sys/devices/system/cpu/cpufreq/ondemand/io_is_busy", "1"); |
| sysfs_write("/sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor", "4"); |
| } else if (strncmp(governor, "interactive", 11) == 0) { |
| sysfs_write("/sys/devices/system/cpu/cpufreq/interactive/min_sample_time", "90000"); |
| sysfs_write("/sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay", "30000"); |
| } |
| } |
| |
| static int boostpulse_open(struct s5pc110_power_module *s5pc110) |
| { |
| char buf[80]; |
| |
| pthread_mutex_lock(&s5pc110->lock); |
| |
| if (s5pc110->boostpulse_fd < 0) { |
| if (get_scaling_governor() < 0) { |
| ALOGE("Can't read scaling governor."); |
| s5pc110->boostpulse_warned = 1; |
| } else { |
| if (strncmp(governor, "ondemand", 8) == 0) |
| s5pc110->boostpulse_fd = open(BOOSTPULSE_ONDEMAND, O_WRONLY); |
| else if (strncmp(governor, "interactive", 11) == 0) |
| s5pc110->boostpulse_fd = open(BOOSTPULSE_INTERACTIVE, O_WRONLY); |
| |
| if (s5pc110->boostpulse_fd < 0 && !s5pc110->boostpulse_warned) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error opening %s boostpulse interface: %s\n", governor, buf); |
| s5pc110->boostpulse_warned = 1; |
| } else if (s5pc110->boostpulse_fd > 0) { |
| configure_governor(); |
| ALOGD("Opened %s boostpulse interface", governor); |
| } |
| } |
| } |
| |
| pthread_mutex_unlock(&s5pc110->lock); |
| return s5pc110->boostpulse_fd; |
| } |
| |
| static void s5pc110_power_hint(struct power_module *module, power_hint_t hint, |
| void *data) |
| { |
| struct s5pc110_power_module *s5pc110 = (struct s5pc110_power_module *) module; |
| char buf[80]; |
| int len; |
| int duration = 1; |
| |
| switch (hint) { |
| case POWER_HINT_INTERACTION: |
| case POWER_HINT_CPU_BOOST: |
| if (boostpulse_open(s5pc110) >= 0) { |
| if (data != NULL) |
| duration = (int) data; |
| |
| snprintf(buf, sizeof(buf), "%d", duration); |
| len = write(s5pc110->boostpulse_fd, buf, strlen(buf)); |
| |
| if (len < 0) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error writing to boostpulse: %s\n", buf); |
| |
| pthread_mutex_lock(&s5pc110->lock); |
| close(s5pc110->boostpulse_fd); |
| s5pc110->boostpulse_fd = -1; |
| s5pc110->boostpulse_warned = 0; |
| pthread_mutex_unlock(&s5pc110->lock); |
| } |
| } |
| break; |
| |
| case POWER_HINT_VSYNC: |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static void s5pc110_power_init(struct power_module *module) |
| { |
| get_scaling_governor(); |
| configure_governor(); |
| } |
| |
| static struct hw_module_methods_t power_module_methods = { |
| .open = NULL, |
| }; |
| |
| struct s5pc110_power_module HAL_MODULE_INFO_SYM = { |
| base: { |
| common: { |
| tag: HARDWARE_MODULE_TAG, |
| module_api_version: POWER_MODULE_API_VERSION_0_2, |
| hal_api_version: HARDWARE_HAL_API_VERSION, |
| id: POWER_HARDWARE_MODULE_ID, |
| name: "S5PC110 Power HAL", |
| author: "The CyanogenMod Project", |
| methods: &power_module_methods, |
| }, |
| init: s5pc110_power_init, |
| setInteractive: s5pc110_power_set_interactive, |
| powerHint: s5pc110_power_hint, |
| }, |
| |
| lock: PTHREAD_MUTEX_INITIALIZER, |
| boostpulse_fd: -1, |
| boostpulse_warned: 0, |
| }; |