| ############################################################################### |
| # NFC Configuration for NON-HAL component S.LSI NFC Chip |
| # Samsung Electronics, System LSI Division |
| # Update Date : 2018/07/27 |
| # Configuration : UICC + eSE as CE mode & 106k P2P disabled |
| # Region : EUR OPEN / CHINA |
| # F/W Version dependency : NONE |
| ########################## Start of libnfc-nci.conf ########################### |
| ############################################################################### |
| # Application options |
| NFC_DEBUG_ENABLED=1 |
| ############################################################################### |
| # performance measurement |
| # Change this setting to control how often USERIAL log the performance (throughput) |
| # data on read/write/poll |
| # defailt is to log performance dara for every 100 read or write |
| #REPORT_PERFORMANCE_MEASURE=100 |
| ############################################################################### |
| # File used for NFA storage |
| NFA_STORAGE="/data/nfc" |
| ############################################################################### |
| # When screen is turned off, specify the desired power state of the controller. |
| # 0: power-off-sleep state; DEFAULT |
| # 1: full-power state |
| # 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) |
| SCREEN_OFF_POWER_STATE=1 |
| ############################################################################### |
| # Force tag polling for the following technology(s). |
| # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | |
| # NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | |
| # NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | |
| # NFA_TECHNOLOGY_MASK_ACTIVE |
| # |
| # Notable bits: |
| # NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ |
| # NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ |
| # NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ |
| # NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ |
| # NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ |
| # NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ |
| POLLING_TECH_MASK=0xEF |
| ############################################################################### |
| # Force P2P to only listen for the following technology(s). |
| # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | |
| # NFA_TECHNOLOGY_MASK_ACTIVE |
| # |
| # Notable bits: |
| # NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ |
| # NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ |
| # NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ |
| P2P_LISTEN_TECH_MASK=0xC4 |
| PRESERVE_STORAGE=1 |
| ############################################################################### |
| # Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. |
| # The value is set assumeing discovery of 0x00(Host), 0xC0(Ese) and 0x80(UICC). |
| # If a platform will exclude and SE, this value can be reduced so that the stack |
| # will not wait any longer than necessary. |
| # Maximum EE supported number |
| #NFA_MAX_EE_SUPPORTED=3 |
| ############################################################################### |
| # AID_MATCHING constants |
| # AID_MATCHING_EXACT_ONLY 0x00 |
| # AID_MATCHING_EXACT_OR_PREFIX 0x01 |
| # AID_MATCHING_PREFIX_ONLY 0x02 |
| # AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 |
| AID_MATCHING_MODE=0x01 |
| |
| ############################################################################### |
| # Partial AID setting : Only used for ATT / TMO / VZW |
| # This configuration may be changed by MNO specific requirement. |
| # Description |
| # 1st byte : NCI Length |
| # 2nd byte : Number of set |
| # 3rd~ bytes : Partial matching order |
| # Matching value : Full matching = 0x00, Subset Matching = 0x01, Superset Matching : 0x02, Pattern Matching : 0x03 |
| # ex) 2f 39 03 02 01 02 --> order : full matching - subset matching - superset matching PARTIAL_AID={03:02:01:02} |
| PARTIAL_AID={02:01:05} |
| |
| ############################################################################### |
| # UICC listen tech mask |
| # Force UICC to only listen to the following technology(s). |
| # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B. |
| # If this option is blocked by # comment, default value will be applied |
| ############################################################################### |
| # Description |
| # Oring each tech mask |
| # Type A : 0x01 |
| # Type B : 0x02 |
| # Type F : 0x04 |
| ############################################################################### |
| # Guide |
| # HK : UICC_LISTEN_TECH_MASK=0x07 (Enable Type F card) |
| # Other region : UICC_LISTEN_TECH_MASK=0x03 (Default value) |
| UICC_LISTEN_TECH_MASK=0x07 |
| |
| ############################################################################### |
| # Default poll duration (in ms) |
| # The defualt is 500ms if not set (see nfc_target.h) |
| NFA_DM_DISC_DURATION_POLL=500 |
| |
| ############################################################################### |
| # eSE Chip Type Setting |
| # Configure eSE Chip Type. |
| # NFA_HCI_USE_FORCE_SETTING = 0x00 : Auto Setting |
| # NFA_HCI_USE_FORCE_SETTING = 0x01 : Manual Setting |
| # NFA_HCI_ESE_CHIP_TYPE=0x00 : Oberthur eSE |
| # NFA_HCI_ESE_CHIP_TYPE=0x01 : Gemalto eSE |
| # NFA_HCI_DEFAULT_STATIC_PIPE_TYPE = 0x00 : Supported dynamic pipe for wired C/E. |
| # NFA_HCI_DEFAULT_STATIC_PIPE_TYPE = 0x01 : Supported static pipe for wired C/E. |
| # NFA_HCI_APDU_GATE = 0xF0 : Gate ID for dynamic pipe. |
| # You must set this value if you set 'NFA_HCI_DEFAULT_STATIC_PIPE_TYPE = 0x00'. |
| NFA_HCI_USE_FORCE_SETTING=0x00 |
| NFA_HCI_ESE_CHIP_TYPE=0x01 |
| NFA_HCI_DEFAULT_STATIC_PIPE_TYPE=0x01 |
| ############################################################################### |
| |
| ############################################################################### |
| # eSE Power Stable Time |
| # Configure eSE Power Stable Time (ms) |
| # Only for Gemalto COS |
| |
| ESE_POWER_STABLE_TIME=50 |
| ############################################################################### |
| |
| ############################################################################### |
| # Application options |
| APPL_TRACE_LEVEL=0xFF |
| PROTOCOL_TRACE_LEVEL=0xFFFFFFFF |
| ############################################################################### |
| |
| |
| ############################################################################### |
| # power control driver |
| # Specify a kernel driver that support ioctl commands to control NFC_EN and |
| # NFC_WAKE gpio signals. |
| # |
| # POWER_CONTRL_DRIVER=<driver> |
| # i2c and spi driver may be used to control NFC_EN and NFC_WAKE signal |
| POWER_CONTROL_DRIVER="/dev/sec-nfc" |
| |
| ############################################################################### |
| # transport driver |
| # |
| # TRANSPORT_DRIVER=<driver> |
| # |
| # where <driver> can be, for example: |
| # "/dev/ttyS" (UART) |
| # "/dev/bcmi2cnfc" (I2C) |
| # "hwtun" (HW Tunnel) |
| # "/dev/bcmspinfc" (SPI) |
| # "/dev/btusb0" (BT USB) |
| TRANSPORT_DRIVER="/dev/sec-nfc" |
| |
| ############################################################################### |
| # ProtocolClt was removed from NFA_PROPRIETARY_CFG, |
| # and a new NFA_PROPRIETARY_CFG_CLT variable was created. |
| # protocolClt default value = 0x90 |
| NFA_PROPRIETARY_CFG_CLT=0x90 |
| ACTIVE_SE=0x02 |
| |
| ############### end of config ############################## |