| /* |
| * Copyright (C) 2013-2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_INCLUDE_CAMERA3_H |
| #define ANDROID_INCLUDE_CAMERA3_H |
| |
| #include <system/camera_metadata.h> |
| #include <hardware/camera_common.h> |
| |
| /** |
| * Camera device HAL 3.6[ CAMERA_DEVICE_API_VERSION_3_6 ] |
| * |
| * This is the current recommended version of the camera device HAL. |
| * |
| * Supports the android.hardware.Camera API, and as of v3.2, the |
| * android.hardware.camera2 API as LIMITED or above hardware level. |
| * |
| * Camera devices that support this version of the HAL must return |
| * CAMERA_DEVICE_API_VERSION_3_6 in camera_device_t.common.version and in |
| * camera_info_t.device_version (from camera_module_t.get_camera_info). |
| * |
| * CAMERA_DEVICE_API_VERSION_3_3 and above: |
| * Camera modules that may contain version 3.3 or above devices must |
| * implement at least version 2.2 of the camera module interface (as defined |
| * by camera_module_t.common.module_api_version). |
| * |
| * CAMERA_DEVICE_API_VERSION_3_2: |
| * Camera modules that may contain version 3.2 devices must implement at |
| * least version 2.2 of the camera module interface (as defined by |
| * camera_module_t.common.module_api_version). |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * Camera modules that may contain version 3.1 (or 3.0) devices must |
| * implement at least version 2.0 of the camera module interface |
| * (as defined by camera_module_t.common.module_api_version). |
| * |
| * See camera_common.h for more versioning details. |
| * |
| * Documentation index: |
| * S1. Version history |
| * S2. Startup and operation sequencing |
| * S3. Operational modes |
| * S4. 3A modes and state machines |
| * S5. Cropping |
| * S6. Error management |
| * S7. Key Performance Indicator (KPI) glossary |
| * S8. Sample Use Cases |
| * S9. Notes on Controls and Metadata |
| * S10. Reprocessing flow and controls |
| */ |
| |
| /** |
| * S1. Version history: |
| * |
| * 1.0: Initial Android camera HAL (Android 4.0) [camera.h]: |
| * |
| * - Converted from C++ CameraHardwareInterface abstraction layer. |
| * |
| * - Supports android.hardware.Camera API. |
| * |
| * 2.0: Initial release of expanded-capability HAL (Android 4.2) [camera2.h]: |
| * |
| * - Sufficient for implementing existing android.hardware.Camera API. |
| * |
| * - Allows for ZSL queue in camera service layer |
| * |
| * - Not tested for any new features such manual capture control, Bayer RAW |
| * capture, reprocessing of RAW data. |
| * |
| * 3.0: First revision of expanded-capability HAL: |
| * |
| * - Major version change since the ABI is completely different. No change to |
| * the required hardware capabilities or operational model from 2.0. |
| * |
| * - Reworked input request and stream queue interfaces: Framework calls into |
| * HAL with next request and stream buffers already dequeued. Sync framework |
| * support is included, necessary for efficient implementations. |
| * |
| * - Moved triggers into requests, most notifications into results. |
| * |
| * - Consolidated all callbacks into framework into one structure, and all |
| * setup methods into a single initialize() call. |
| * |
| * - Made stream configuration into a single call to simplify stream |
| * management. Bidirectional streams replace STREAM_FROM_STREAM construct. |
| * |
| * - Limited mode semantics for older/limited hardware devices. |
| * |
| * 3.1: Minor revision of expanded-capability HAL: |
| * |
| * - configure_streams passes consumer usage flags to the HAL. |
| * |
| * - flush call to drop all in-flight requests/buffers as fast as possible. |
| * |
| * 3.2: Minor revision of expanded-capability HAL: |
| * |
| * - Deprecates get_metadata_vendor_tag_ops. Please use get_vendor_tag_ops |
| * in camera_common.h instead. |
| * |
| * - register_stream_buffers deprecated. All gralloc buffers provided |
| * by framework to HAL in process_capture_request may be new at any time. |
| * |
| * - add partial result support. process_capture_result may be called |
| * multiple times with a subset of the available result before the full |
| * result is available. |
| * |
| * - add manual template to camera3_request_template. The applications may |
| * use this template to control the capture settings directly. |
| * |
| * - Rework the bidirectional and input stream specifications. |
| * |
| * - change the input buffer return path. The buffer is returned in |
| * process_capture_result instead of process_capture_request. |
| * |
| * 3.3: Minor revision of expanded-capability HAL: |
| * |
| * - OPAQUE and YUV reprocessing API updates. |
| * |
| * - Basic support for depth output buffers. |
| * |
| * - Addition of data_space field to camera3_stream_t. |
| * |
| * - Addition of rotation field to camera3_stream_t. |
| * |
| * - Addition of camera3 stream configuration operation mode to camera3_stream_configuration_t |
| * |
| * 3.4: Minor additions to supported metadata and changes to data_space support |
| * |
| * - Add ANDROID_SENSOR_OPAQUE_RAW_SIZE static metadata as mandatory if |
| * RAW_OPAQUE format is supported. |
| * |
| * - Add ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE static metadata as |
| * mandatory if any RAW format is supported |
| * |
| * - Switch camera3_stream_t data_space field to a more flexible definition, |
| * using the version 0 definition of dataspace encoding. |
| * |
| * - General metadata additions which are available to use for HALv3.2 or |
| * newer: |
| * - ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_3 |
| * - ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST |
| * - ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE |
| * - ANDROID_SENSOR_DYNAMIC_BLACK_LEVEL |
| * - ANDROID_SENSOR_DYNAMIC_WHITE_LEVEL |
| * - ANDROID_SENSOR_OPAQUE_RAW_SIZE |
| * - ANDROID_SENSOR_OPTICAL_BLACK_REGIONS |
| * |
| * 3.5: Minor revisions to support session parameters and logical multi camera: |
| * |
| * - Add ANDROID_REQUEST_AVAILABLE_SESSION_KEYS static metadata, which is |
| * optional for implementations that want to support session parameters. If support is |
| * needed, then Hal should populate the list with all available capture request keys |
| * that can cause severe processing delays when modified by client. Typical examples |
| * include parameters that require time-consuming HW re-configuration or internal camera |
| * pipeline update. |
| * |
| * - Add a session parameter field to camera3_stream_configuration which can be populated |
| * by clients with initial values for the keys found in ANDROID_REQUEST_AVAILABLE_SESSION_KEYS. |
| * |
| * - Metadata additions for logical multi camera capability: |
| * - ANDROID_REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA |
| * - ANDROID_LOGICAL_MULTI_CAMERA_PHYSICAL_IDS |
| * - ANDROID_LOGICAL_MULTI_CAMERA_SYNC_TYPE |
| * |
| * - Add physical camera id field in camera3_stream, so that for a logical |
| * multi camera, the application has the option to specify which physical camera |
| * a particular stream is configured on. |
| * |
| * - Add physical camera id and settings field in camera3_capture_request, so that |
| * for a logical multi camera, the application has the option to specify individual |
| * settings for a particular physical device. |
| * |
| * 3.6: Minor revisions to support HAL buffer management APIs: |
| * |
| * - Add ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION static metadata, which allows HAL to |
| * opt in to the new buffer management APIs described below. |
| * |
| * - Add request_stream_buffers() and return_stream_buffers() to camera3_callback_ops_t for HAL to |
| * request and return output buffers from camera service. |
| * |
| * - Add signal_stream_flush() to camera3_device_ops_t for camera service to notify HAL an |
| * upcoming configure_streams() call requires HAL to return buffers of certain streams. |
| * |
| * - Add CAMERA3_JPEG_APP_SEGMENTS_BLOB_ID to support BLOB with only JPEG apps |
| * segments and thumbnail (without main image bitstream). Camera framework |
| * uses such stream togerther with a HAL YUV_420_888/IMPLEMENTATION_DEFINED |
| * stream to encode HEIC (ISO/IEC 23008-12) image. |
| * |
| * - Add is_reconfiguration_required() to camera3_device_ops_t to enable HAL to skip or |
| * trigger stream reconfiguration depending on new session parameter values. |
| * |
| */ |
| |
| /** |
| * S2. Startup and general expected operation sequence: |
| * |
| * 1. Framework calls camera_module_t->common.open(), which returns a |
| * hardware_device_t structure. |
| * |
| * 2. Framework inspects the hardware_device_t->version field, and instantiates |
| * the appropriate handler for that version of the camera hardware device. In |
| * case the version is CAMERA_DEVICE_API_VERSION_3_0, the device is cast to |
| * a camera3_device_t. |
| * |
| * 3. Framework calls camera3_device_t->ops->initialize() with the framework |
| * callback function pointers. This will only be called this one time after |
| * open(), before any other functions in the ops structure are called. |
| * |
| * 4. The framework calls camera3_device_t->ops->configure_streams() with a list |
| * of input/output streams to the HAL device. |
| * |
| * 5. <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * The framework allocates gralloc buffers and calls |
| * camera3_device_t->ops->register_stream_buffers() for at least one of the |
| * output streams listed in configure_streams. The same stream is registered |
| * only once. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * camera3_device_t->ops->register_stream_buffers() is not called and must |
| * be NULL. |
| * |
| * 6. The framework requests default settings for some number of use cases with |
| * calls to camera3_device_t->ops->construct_default_request_settings(). This |
| * may occur any time after step 3. |
| * |
| * 7. The framework constructs and sends the first capture request to the HAL, |
| * with settings based on one of the sets of default settings, and with at |
| * least one output stream, which has been registered earlier by the |
| * framework. This is sent to the HAL with |
| * camera3_device_t->ops->process_capture_request(). The HAL must block the |
| * return of this call until it is ready for the next request to be sent. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * The buffer_handle_t provided in the camera3_stream_buffer_t array |
| * in the camera3_capture_request_t may be new and never-before-seen |
| * by the HAL on any given new request. |
| * |
| * 8. The framework continues to submit requests, and call |
| * construct_default_request_settings to get default settings buffers for |
| * other use cases. |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * The framework may call register_stream_buffers() at this time for |
| * not-yet-registered streams. |
| * |
| * 9. When the capture of a request begins (sensor starts exposing for the |
| * capture) or processing a reprocess request begins, the HAL |
| * calls camera3_callback_ops_t->notify() with the SHUTTER event, including |
| * the frame number and the timestamp for start of exposure. For a reprocess |
| * request, the timestamp must be the start of exposure of the input image |
| * which can be looked up with android.sensor.timestamp from |
| * camera3_capture_request_t.settings when process_capture_request() is |
| * called. |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * This notify call must be made before the first call to |
| * process_capture_result() for that frame number. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * The camera3_callback_ops_t->notify() call with the SHUTTER event should |
| * be made as early as possible since the framework will be unable to |
| * deliver gralloc buffers to the application layer (for that frame) until |
| * it has a valid timestamp for the start of exposure (or the input image's |
| * start of exposure for a reprocess request). |
| * |
| * Both partial metadata results and the gralloc buffers may be sent to the |
| * framework at any time before or after the SHUTTER event. |
| * |
| * 10. After some pipeline delay, the HAL begins to return completed captures to |
| * the framework with camera3_callback_ops_t->process_capture_result(). These |
| * are returned in the same order as the requests were submitted. Multiple |
| * requests can be in flight at once, depending on the pipeline depth of the |
| * camera HAL device. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * Once a buffer is returned by process_capture_result as part of the |
| * camera3_stream_buffer_t array, and the fence specified by release_fence |
| * has been signaled (this is a no-op for -1 fences), the ownership of that |
| * buffer is considered to be transferred back to the framework. After that, |
| * the HAL must no longer retain that particular buffer, and the |
| * framework may clean up the memory for it immediately. |
| * |
| * process_capture_result may be called multiple times for a single frame, |
| * each time with a new disjoint piece of metadata and/or set of gralloc |
| * buffers. The framework will accumulate these partial metadata results |
| * into one result. |
| * |
| * In particular, it is legal for a process_capture_result to be called |
| * simultaneously for both a frame N and a frame N+1 as long as the |
| * above rule holds for gralloc buffers (both input and output). |
| * |
| * 11. After some time, the framework may stop submitting new requests, wait for |
| * the existing captures to complete (all buffers filled, all results |
| * returned), and then call configure_streams() again. This resets the camera |
| * hardware and pipeline for a new set of input/output streams. Some streams |
| * may be reused from the previous configuration; if these streams' buffers |
| * had already been registered with the HAL, they will not be registered |
| * again. The framework then continues from step 7, if at least one |
| * registered output stream remains (otherwise, step 5 is required first). |
| * |
| * 12. Alternatively, the framework may call camera3_device_t->common->close() |
| * to end the camera session. This may be called at any time when no other |
| * calls from the framework are active, although the call may block until all |
| * in-flight captures have completed (all results returned, all buffers |
| * filled). After the close call returns, no more calls to the |
| * camera3_callback_ops_t functions are allowed from the HAL. Once the |
| * close() call is underway, the framework may not call any other HAL device |
| * functions. |
| * |
| * 13. In case of an error or other asynchronous event, the HAL must call |
| * camera3_callback_ops_t->notify() with the appropriate error/event |
| * message. After returning from a fatal device-wide error notification, the |
| * HAL should act as if close() had been called on it. However, the HAL must |
| * either cancel or complete all outstanding captures before calling |
| * notify(), so that once notify() is called with a fatal error, the |
| * framework will not receive further callbacks from the device. Methods |
| * besides close() should return -ENODEV or NULL after the notify() method |
| * returns from a fatal error message. |
| */ |
| |
| /** |
| * S3. Operational modes: |
| * |
| * The camera 3 HAL device can implement one of two possible operational modes; |
| * limited and full. Full support is expected from new higher-end |
| * devices. Limited mode has hardware requirements roughly in line with those |
| * for a camera HAL device v1 implementation, and is expected from older or |
| * inexpensive devices. Full is a strict superset of limited, and they share the |
| * same essential operational flow, as documented above. |
| * |
| * The HAL must indicate its level of support with the |
| * android.info.supportedHardwareLevel static metadata entry, with 0 indicating |
| * limited mode, and 1 indicating full mode support. |
| * |
| * Roughly speaking, limited-mode devices do not allow for application control |
| * of capture settings (3A control only), high-rate capture of high-resolution |
| * images, raw sensor readout, or support for YUV output streams above maximum |
| * recording resolution (JPEG only for large images). |
| * |
| * ** Details of limited mode behavior: |
| * |
| * - Limited-mode devices do not need to implement accurate synchronization |
| * between capture request settings and the actual image data |
| * captured. Instead, changes to settings may take effect some time in the |
| * future, and possibly not for the same output frame for each settings |
| * entry. Rapid changes in settings may result in some settings never being |
| * used for a capture. However, captures that include high-resolution output |
| * buffers ( > 1080p ) have to use the settings as specified (but see below |
| * for processing rate). |
| * |
| * - Limited-mode devices do not need to support most of the |
| * settings/result/static info metadata. Specifically, only the following settings |
| * are expected to be consumed or produced by a limited-mode HAL device: |
| * |
| * android.control.aeAntibandingMode (controls and dynamic) |
| * android.control.aeExposureCompensation (controls and dynamic) |
| * android.control.aeLock (controls and dynamic) |
| * android.control.aeMode (controls and dynamic) |
| * android.control.aeRegions (controls and dynamic) |
| * android.control.aeTargetFpsRange (controls and dynamic) |
| * android.control.aePrecaptureTrigger (controls and dynamic) |
| * android.control.afMode (controls and dynamic) |
| * android.control.afRegions (controls and dynamic) |
| * android.control.awbLock (controls and dynamic) |
| * android.control.awbMode (controls and dynamic) |
| * android.control.awbRegions (controls and dynamic) |
| * android.control.captureIntent (controls and dynamic) |
| * android.control.effectMode (controls and dynamic) |
| * android.control.mode (controls and dynamic) |
| * android.control.sceneMode (controls and dynamic) |
| * android.control.videoStabilizationMode (controls and dynamic) |
| * android.control.aeAvailableAntibandingModes (static) |
| * android.control.aeAvailableModes (static) |
| * android.control.aeAvailableTargetFpsRanges (static) |
| * android.control.aeCompensationRange (static) |
| * android.control.aeCompensationStep (static) |
| * android.control.afAvailableModes (static) |
| * android.control.availableEffects (static) |
| * android.control.availableSceneModes (static) |
| * android.control.availableVideoStabilizationModes (static) |
| * android.control.awbAvailableModes (static) |
| * android.control.maxRegions (static) |
| * android.control.sceneModeOverrides (static) |
| * android.control.aeState (dynamic) |
| * android.control.afState (dynamic) |
| * android.control.awbState (dynamic) |
| * |
| * android.flash.mode (controls and dynamic) |
| * android.flash.info.available (static) |
| * |
| * android.info.supportedHardwareLevel (static) |
| * |
| * android.jpeg.gpsCoordinates (controls and dynamic) |
| * android.jpeg.gpsProcessingMethod (controls and dynamic) |
| * android.jpeg.gpsTimestamp (controls and dynamic) |
| * android.jpeg.orientation (controls and dynamic) |
| * android.jpeg.quality (controls and dynamic) |
| * android.jpeg.thumbnailQuality (controls and dynamic) |
| * android.jpeg.thumbnailSize (controls and dynamic) |
| * android.jpeg.availableThumbnailSizes (static) |
| * android.jpeg.maxSize (static) |
| * |
| * android.lens.info.minimumFocusDistance (static) |
| * |
| * android.request.id (controls and dynamic) |
| * |
| * android.scaler.cropRegion (controls and dynamic) |
| * android.scaler.availableStreamConfigurations (static) |
| * android.scaler.availableMinFrameDurations (static) |
| * android.scaler.availableStallDurations (static) |
| * android.scaler.availableMaxDigitalZoom (static) |
| * android.scaler.maxDigitalZoom (static) |
| * android.scaler.croppingType (static) |
| * |
| * android.sensor.orientation (static) |
| * android.sensor.timestamp (dynamic) |
| * |
| * android.statistics.faceDetectMode (controls and dynamic) |
| * android.statistics.info.availableFaceDetectModes (static) |
| * android.statistics.faceIds (dynamic) |
| * android.statistics.faceLandmarks (dynamic) |
| * android.statistics.faceRectangles (dynamic) |
| * android.statistics.faceScores (dynamic) |
| * |
| * android.sync.frameNumber (dynamic) |
| * android.sync.maxLatency (static) |
| * |
| * - Captures in limited mode that include high-resolution (> 1080p) output |
| * buffers may block in process_capture_request() until all the output buffers |
| * have been filled. A full-mode HAL device must process sequences of |
| * high-resolution requests at the rate indicated in the static metadata for |
| * that pixel format. The HAL must still call process_capture_result() to |
| * provide the output; the framework must simply be prepared for |
| * process_capture_request() to block until after process_capture_result() for |
| * that request completes for high-resolution captures for limited-mode |
| * devices. |
| * |
| * - Full-mode devices must support below additional capabilities: |
| * - 30fps at maximum resolution is preferred, more than 20fps is required. |
| * - Per frame control (android.sync.maxLatency == PER_FRAME_CONTROL). |
| * - Sensor manual control metadata. See MANUAL_SENSOR defined in |
| * android.request.availableCapabilities. |
| * - Post-processing manual control metadata. See MANUAL_POST_PROCESSING defined |
| * in android.request.availableCapabilities. |
| * |
| */ |
| |
| /** |
| * S4. 3A modes and state machines: |
| * |
| * While the actual 3A algorithms are up to the HAL implementation, a high-level |
| * state machine description is defined by the HAL interface, to allow the HAL |
| * device and the framework to communicate about the current state of 3A, and to |
| * trigger 3A events. |
| * |
| * When the device is opened, all the individual 3A states must be |
| * STATE_INACTIVE. Stream configuration does not reset 3A. For example, locked |
| * focus must be maintained across the configure() call. |
| * |
| * Triggering a 3A action involves simply setting the relevant trigger entry in |
| * the settings for the next request to indicate start of trigger. For example, |
| * the trigger for starting an autofocus scan is setting the entry |
| * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTROL_AF_TRIGGER_START for one |
| * request, and cancelling an autofocus scan is triggered by setting |
| * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTRL_AF_TRIGGER_CANCEL. Otherwise, |
| * the entry will not exist, or be set to ANDROID_CONTROL_AF_TRIGGER_IDLE. Each |
| * request with a trigger entry set to a non-IDLE value will be treated as an |
| * independent triggering event. |
| * |
| * At the top level, 3A is controlled by the ANDROID_CONTROL_MODE setting, which |
| * selects between no 3A (ANDROID_CONTROL_MODE_OFF), normal AUTO mode |
| * (ANDROID_CONTROL_MODE_AUTO), and using the scene mode setting |
| * (ANDROID_CONTROL_USE_SCENE_MODE). |
| * |
| * - In OFF mode, each of the individual AE/AF/AWB modes are effectively OFF, |
| * and none of the capture controls may be overridden by the 3A routines. |
| * |
| * - In AUTO mode, Auto-focus, auto-exposure, and auto-whitebalance all run |
| * their own independent algorithms, and have their own mode, state, and |
| * trigger metadata entries, as listed in the next section. |
| * |
| * - In USE_SCENE_MODE, the value of the ANDROID_CONTROL_SCENE_MODE entry must |
| * be used to determine the behavior of 3A routines. In SCENE_MODEs other than |
| * FACE_PRIORITY, the HAL must override the values of |
| * ANDROId_CONTROL_AE/AWB/AF_MODE to be the mode it prefers for the selected |
| * SCENE_MODE. For example, the HAL may prefer SCENE_MODE_NIGHT to use |
| * CONTINUOUS_FOCUS AF mode. Any user selection of AE/AWB/AF_MODE when scene |
| * must be ignored for these scene modes. |
| * |
| * - For SCENE_MODE_FACE_PRIORITY, the AE/AWB/AF_MODE controls work as in |
| * ANDROID_CONTROL_MODE_AUTO, but the 3A routines must bias toward metering |
| * and focusing on any detected faces in the scene. |
| * |
| * S4.1. Auto-focus settings and result entries: |
| * |
| * Main metadata entries: |
| * |
| * ANDROID_CONTROL_AF_MODE: Control for selecting the current autofocus |
| * mode. Set by the framework in the request settings. |
| * |
| * AF_MODE_OFF: AF is disabled; the framework/app directly controls lens |
| * position. |
| * |
| * AF_MODE_AUTO: Single-sweep autofocus. No lens movement unless AF is |
| * triggered. |
| * |
| * AF_MODE_MACRO: Single-sweep up-close autofocus. No lens movement unless |
| * AF is triggered. |
| * |
| * AF_MODE_CONTINUOUS_VIDEO: Smooth continuous focusing, for recording |
| * video. Triggering immediately locks focus in current |
| * position. Canceling resumes cotinuous focusing. |
| * |
| * AF_MODE_CONTINUOUS_PICTURE: Fast continuous focusing, for |
| * zero-shutter-lag still capture. Triggering locks focus once currently |
| * active sweep concludes. Canceling resumes continuous focusing. |
| * |
| * AF_MODE_EDOF: Advanced extended depth of field focusing. There is no |
| * autofocus scan, so triggering one or canceling one has no effect. |
| * Images are focused automatically by the HAL. |
| * |
| * ANDROID_CONTROL_AF_STATE: Dynamic metadata describing the current AF |
| * algorithm state, reported by the HAL in the result metadata. |
| * |
| * AF_STATE_INACTIVE: No focusing has been done, or algorithm was |
| * reset. Lens is not moving. Always the state for MODE_OFF or MODE_EDOF. |
| * When the device is opened, it must start in this state. |
| * |
| * AF_STATE_PASSIVE_SCAN: A continuous focus algorithm is currently scanning |
| * for good focus. The lens is moving. |
| * |
| * AF_STATE_PASSIVE_FOCUSED: A continuous focus algorithm believes it is |
| * well focused. The lens is not moving. The HAL may spontaneously leave |
| * this state. |
| * |
| * AF_STATE_PASSIVE_UNFOCUSED: A continuous focus algorithm believes it is |
| * not well focused. The lens is not moving. The HAL may spontaneously |
| * leave this state. |
| * |
| * AF_STATE_ACTIVE_SCAN: A scan triggered by the user is underway. |
| * |
| * AF_STATE_FOCUSED_LOCKED: The AF algorithm believes it is focused. The |
| * lens is not moving. |
| * |
| * AF_STATE_NOT_FOCUSED_LOCKED: The AF algorithm has been unable to |
| * focus. The lens is not moving. |
| * |
| * ANDROID_CONTROL_AF_TRIGGER: Control for starting an autofocus scan, the |
| * meaning of which is mode- and state- dependent. Set by the framework in |
| * the request settings. |
| * |
| * AF_TRIGGER_IDLE: No current trigger. |
| * |
| * AF_TRIGGER_START: Trigger start of AF scan. Effect is mode and state |
| * dependent. |
| * |
| * AF_TRIGGER_CANCEL: Cancel current AF scan if any, and reset algorithm to |
| * default. |
| * |
| * Additional metadata entries: |
| * |
| * ANDROID_CONTROL_AF_REGIONS: Control for selecting the regions of the FOV |
| * that should be used to determine good focus. This applies to all AF |
| * modes that scan for focus. Set by the framework in the request |
| * settings. |
| * |
| * S4.2. Auto-exposure settings and result entries: |
| * |
| * Main metadata entries: |
| * |
| * ANDROID_CONTROL_AE_MODE: Control for selecting the current auto-exposure |
| * mode. Set by the framework in the request settings. |
| * |
| * AE_MODE_OFF: Autoexposure is disabled; the user controls exposure, gain, |
| * frame duration, and flash. |
| * |
| * AE_MODE_ON: Standard autoexposure, with flash control disabled. User may |
| * set flash to fire or to torch mode. |
| * |
| * AE_MODE_ON_AUTO_FLASH: Standard autoexposure, with flash on at HAL's |
| * discretion for precapture and still capture. User control of flash |
| * disabled. |
| * |
| * AE_MODE_ON_ALWAYS_FLASH: Standard autoexposure, with flash always fired |
| * for capture, and at HAL's discretion for precapture.. User control of |
| * flash disabled. |
| * |
| * AE_MODE_ON_AUTO_FLASH_REDEYE: Standard autoexposure, with flash on at |
| * HAL's discretion for precapture and still capture. Use a flash burst |
| * at end of precapture sequence to reduce redeye in the final |
| * picture. User control of flash disabled. |
| * |
| * ANDROID_CONTROL_AE_STATE: Dynamic metadata describing the current AE |
| * algorithm state, reported by the HAL in the result metadata. |
| * |
| * AE_STATE_INACTIVE: Initial AE state after mode switch. When the device is |
| * opened, it must start in this state. |
| * |
| * AE_STATE_SEARCHING: AE is not converged to a good value, and is adjusting |
| * exposure parameters. |
| * |
| * AE_STATE_CONVERGED: AE has found good exposure values for the current |
| * scene, and the exposure parameters are not changing. HAL may |
| * spontaneously leave this state to search for better solution. |
| * |
| * AE_STATE_LOCKED: AE has been locked with the AE_LOCK control. Exposure |
| * values are not changing. |
| * |
| * AE_STATE_FLASH_REQUIRED: The HAL has converged exposure, but believes |
| * flash is required for a sufficiently bright picture. Used for |
| * determining if a zero-shutter-lag frame can be used. |
| * |
| * AE_STATE_PRECAPTURE: The HAL is in the middle of a precapture |
| * sequence. Depending on AE mode, this mode may involve firing the |
| * flash for metering, or a burst of flash pulses for redeye reduction. |
| * |
| * ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER: Control for starting a metering |
| * sequence before capturing a high-quality image. Set by the framework in |
| * the request settings. |
| * |
| * PRECAPTURE_TRIGGER_IDLE: No current trigger. |
| * |
| * PRECAPTURE_TRIGGER_START: Start a precapture sequence. The HAL should |
| * use the subsequent requests to measure good exposure/white balance |
| * for an upcoming high-resolution capture. |
| * |
| * Additional metadata entries: |
| * |
| * ANDROID_CONTROL_AE_LOCK: Control for locking AE controls to their current |
| * values |
| * |
| * ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION: Control for adjusting AE |
| * algorithm target brightness point. |
| * |
| * ANDROID_CONTROL_AE_TARGET_FPS_RANGE: Control for selecting the target frame |
| * rate range for the AE algorithm. The AE routine cannot change the frame |
| * rate to be outside these bounds. |
| * |
| * ANDROID_CONTROL_AE_REGIONS: Control for selecting the regions of the FOV |
| * that should be used to determine good exposure levels. This applies to |
| * all AE modes besides OFF. |
| * |
| * S4.3. Auto-whitebalance settings and result entries: |
| * |
| * Main metadata entries: |
| * |
| * ANDROID_CONTROL_AWB_MODE: Control for selecting the current white-balance |
| * mode. |
| * |
| * AWB_MODE_OFF: Auto-whitebalance is disabled. User controls color matrix. |
| * |
| * AWB_MODE_AUTO: Automatic white balance is enabled; 3A controls color |
| * transform, possibly using more complex transforms than a simple |
| * matrix. |
| * |
| * AWB_MODE_INCANDESCENT: Fixed white balance settings good for indoor |
| * incandescent (tungsten) lighting, roughly 2700K. |
| * |
| * AWB_MODE_FLUORESCENT: Fixed white balance settings good for fluorescent |
| * lighting, roughly 5000K. |
| * |
| * AWB_MODE_WARM_FLUORESCENT: Fixed white balance settings good for |
| * fluorescent lighting, roughly 3000K. |
| * |
| * AWB_MODE_DAYLIGHT: Fixed white balance settings good for daylight, |
| * roughly 5500K. |
| * |
| * AWB_MODE_CLOUDY_DAYLIGHT: Fixed white balance settings good for clouded |
| * daylight, roughly 6500K. |
| * |
| * AWB_MODE_TWILIGHT: Fixed white balance settings good for |
| * near-sunset/sunrise, roughly 15000K. |
| * |
| * AWB_MODE_SHADE: Fixed white balance settings good for areas indirectly |
| * lit by the sun, roughly 7500K. |
| * |
| * ANDROID_CONTROL_AWB_STATE: Dynamic metadata describing the current AWB |
| * algorithm state, reported by the HAL in the result metadata. |
| * |
| * AWB_STATE_INACTIVE: Initial AWB state after mode switch. When the device |
| * is opened, it must start in this state. |
| * |
| * AWB_STATE_SEARCHING: AWB is not converged to a good value, and is |
| * changing color adjustment parameters. |
| * |
| * AWB_STATE_CONVERGED: AWB has found good color adjustment values for the |
| * current scene, and the parameters are not changing. HAL may |
| * spontaneously leave this state to search for better solution. |
| * |
| * AWB_STATE_LOCKED: AWB has been locked with the AWB_LOCK control. Color |
| * adjustment values are not changing. |
| * |
| * Additional metadata entries: |
| * |
| * ANDROID_CONTROL_AWB_LOCK: Control for locking AWB color adjustments to |
| * their current values. |
| * |
| * ANDROID_CONTROL_AWB_REGIONS: Control for selecting the regions of the FOV |
| * that should be used to determine good color balance. This applies only |
| * to auto-WB mode. |
| * |
| * S4.4. General state machine transition notes |
| * |
| * Switching between AF, AE, or AWB modes always resets the algorithm's state |
| * to INACTIVE. Similarly, switching between CONTROL_MODE or |
| * CONTROL_SCENE_MODE if CONTROL_MODE == USE_SCENE_MODE resets all the |
| * algorithm states to INACTIVE. |
| * |
| * The tables below are per-mode. |
| * |
| * S4.5. AF state machines |
| * |
| * when enabling AF or changing AF mode |
| *| state | trans. cause | new state | notes | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| Any | AF mode change| INACTIVE | | |
| *+--------------------+---------------+--------------------+------------------+ |
| * |
| * mode = AF_MODE_OFF or AF_MODE_EDOF |
| *| state | trans. cause | new state | notes | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | | INACTIVE | Never changes | |
| *+--------------------+---------------+--------------------+------------------+ |
| * |
| * mode = AF_MODE_AUTO or AF_MODE_MACRO |
| *| state | trans. cause | new state | notes | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | AF_TRIGGER | ACTIVE_SCAN | Start AF sweep | |
| *| | | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| ACTIVE_SCAN | AF sweep done | FOCUSED_LOCKED | If AF successful | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| ACTIVE_SCAN | AF sweep done | NOT_FOCUSED_LOCKED | If AF successful | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| ACTIVE_SCAN | AF_CANCEL | INACTIVE | Cancel/reset AF | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep | |
| *| | | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| NOT_FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep | |
| *| | | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| All states | mode change | INACTIVE | | |
| *+--------------------+---------------+--------------------+------------------+ |
| * |
| * mode = AF_MODE_CONTINUOUS_VIDEO |
| *| state | trans. cause | new state | notes | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan | |
| *| | new scan | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan | |
| *| | current scan | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan | |
| *| | current scan | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. | |
| *| | | | if focus is good | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. | |
| *| | | | if focus is bad | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens | |
| *| | | | position | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan | |
| *| | new scan | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan | |
| *| | new scan | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan | |
| *+--------------------+---------------+--------------------+------------------+ |
| * |
| * mode = AF_MODE_CONTINUOUS_PICTURE |
| *| state | trans. cause | new state | notes | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan | |
| *| | new scan | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan | |
| *| | current scan | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan | |
| *| | current scan | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Eventual trans. | |
| *| | | | once focus good | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Eventual trans. | |
| *| | | | if cannot focus | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens | |
| *| | | | position | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan | |
| *| | new scan | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan | |
| *| | new scan | | Lens now moving | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. | |
| *| | | | Lens now locked | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan | |
| *+--------------------+---------------+--------------------+------------------+ |
| * |
| * S4.6. AE and AWB state machines |
| * |
| * The AE and AWB state machines are mostly identical. AE has additional |
| * FLASH_REQUIRED and PRECAPTURE states. So rows below that refer to those two |
| * states should be ignored for the AWB state machine. |
| * |
| * when enabling AE/AWB or changing AE/AWB mode |
| *| state | trans. cause | new state | notes | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| Any | mode change | INACTIVE | | |
| *+--------------------+---------------+--------------------+------------------+ |
| * |
| * mode = AE_MODE_OFF / AWB mode not AUTO |
| *| state | trans. cause | new state | notes | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | | INACTIVE | AE/AWB disabled | |
| *+--------------------+---------------+--------------------+------------------+ |
| * |
| * mode = AE_MODE_ON_* / AWB_MODE_AUTO |
| *| state | trans. cause | new state | notes | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | HAL initiates | SEARCHING | | |
| *| | AE/AWB scan | | | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| INACTIVE | AE/AWB_LOCK | LOCKED | values locked | |
| *| | on | | | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| SEARCHING | HAL finishes | CONVERGED | good values, not | |
| *| | AE/AWB scan | | changing | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| SEARCHING | HAL finishes | FLASH_REQUIRED | converged but too| |
| *| | AE scan | | dark w/o flash | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| SEARCHING | AE/AWB_LOCK | LOCKED | values locked | |
| *| | on | | | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| CONVERGED | HAL initiates | SEARCHING | values locked | |
| *| | AE/AWB scan | | | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| CONVERGED | AE/AWB_LOCK | LOCKED | values locked | |
| *| | on | | | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| FLASH_REQUIRED | HAL initiates | SEARCHING | values locked | |
| *| | AE/AWB scan | | | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| FLASH_REQUIRED | AE/AWB_LOCK | LOCKED | values locked | |
| *| | on | | | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| LOCKED | AE/AWB_LOCK | SEARCHING | values not good | |
| *| | off | | after unlock | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| LOCKED | AE/AWB_LOCK | CONVERGED | values good | |
| *| | off | | after unlock | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| LOCKED | AE_LOCK | FLASH_REQUIRED | exposure good, | |
| *| | off | | but too dark | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| All AE states | PRECAPTURE_ | PRECAPTURE | Start precapture | |
| *| | START | | sequence | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PRECAPTURE | Sequence done.| CONVERGED | Ready for high- | |
| *| | AE_LOCK off | | quality capture | |
| *+--------------------+---------------+--------------------+------------------+ |
| *| PRECAPTURE | Sequence done.| LOCKED | Ready for high- | |
| *| | AE_LOCK on | | quality capture | |
| *+--------------------+---------------+--------------------+------------------+ |
| * |
| */ |
| |
| /** |
| * S5. Cropping: |
| * |
| * Cropping of the full pixel array (for digital zoom and other use cases where |
| * a smaller FOV is desirable) is communicated through the |
| * ANDROID_SCALER_CROP_REGION setting. This is a per-request setting, and can |
| * change on a per-request basis, which is critical for implementing smooth |
| * digital zoom. |
| * |
| * The region is defined as a rectangle (x, y, width, height), with (x, y) |
| * describing the top-left corner of the rectangle. The rectangle is defined on |
| * the coordinate system of the sensor active pixel array, with (0,0) being the |
| * top-left pixel of the active pixel array. Therefore, the width and height |
| * cannot be larger than the dimensions reported in the |
| * ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY static info field. The minimum allowed |
| * width and height are reported by the HAL through the |
| * ANDROID_SCALER_MAX_DIGITAL_ZOOM static info field, which describes the |
| * maximum supported zoom factor. Therefore, the minimum crop region width and |
| * height are: |
| * |
| * {width, height} = |
| * { floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[0] / |
| * ANDROID_SCALER_MAX_DIGITAL_ZOOM), |
| * floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[1] / |
| * ANDROID_SCALER_MAX_DIGITAL_ZOOM) } |
| * |
| * If the crop region needs to fulfill specific requirements (for example, it |
| * needs to start on even coordinates, and its width/height needs to be even), |
| * the HAL must do the necessary rounding and write out the final crop region |
| * used in the output result metadata. Similarly, if the HAL implements video |
| * stabilization, it must adjust the result crop region to describe the region |
| * actually included in the output after video stabilization is applied. In |
| * general, a camera-using application must be able to determine the field of |
| * view it is receiving based on the crop region, the dimensions of the image |
| * sensor, and the lens focal length. |
| * |
| * It is assumed that the cropping is applied after raw to other color space |
| * conversion. Raw streams (RAW16 and RAW_OPAQUE) don't have this conversion stage, |
| * and are not croppable. Therefore, the crop region must be ignored by the HAL |
| * for raw streams. |
| * |
| * Since the crop region applies to all non-raw streams, which may have different aspect |
| * ratios than the crop region, the exact sensor region used for each stream may |
| * be smaller than the crop region. Specifically, each stream should maintain |
| * square pixels and its aspect ratio by minimally further cropping the defined |
| * crop region. If the stream's aspect ratio is wider than the crop region, the |
| * stream should be further cropped vertically, and if the stream's aspect ratio |
| * is narrower than the crop region, the stream should be further cropped |
| * horizontally. |
| * |
| * In all cases, the stream crop must be centered within the full crop region, |
| * and each stream is only either cropped horizontally or vertical relative to |
| * the full crop region, never both. |
| * |
| * For example, if two streams are defined, a 640x480 stream (4:3 aspect), and a |
| * 1280x720 stream (16:9 aspect), below demonstrates the expected output regions |
| * for each stream for a few sample crop regions, on a hypothetical 3 MP (2000 x |
| * 1500 pixel array) sensor. |
| * |
| * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio) |
| * |
| * 640x480 stream crop: (500, 375, 1000, 750) (equal to crop region) |
| * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =) |
| * |
| * 0 1000 2000 |
| * +---------+---------+---------+----------+ |
| * | Active pixel array | |
| * | | |
| * | | |
| * + +-------------------+ + 375 |
| * | | | | |
| * | O===================O | |
| * | I 1280x720 stream I | |
| * + I I + 750 |
| * | I I | |
| * | O===================O | |
| * | | | | |
| * + +-------------------+ + 1125 |
| * | Crop region, 640x480 stream | |
| * | | |
| * | | |
| * +---------+---------+---------+----------+ 1500 |
| * |
| * Crop region: (500, 375, 1333, 750) (16:9 aspect ratio) |
| * |
| * 640x480 stream crop: (666, 375, 1000, 750) (marked with =) |
| * 1280x720 stream crop: (500, 375, 1333, 750) (equal to crop region) |
| * |
| * 0 1000 2000 |
| * +---------+---------+---------+----------+ |
| * | Active pixel array | |
| * | | |
| * | | |
| * + +---O==================O---+ + 375 |
| * | | I 640x480 stream I | | |
| * | | I I | | |
| * | | I I | | |
| * + | I I | + 750 |
| * | | I I | | |
| * | | I I | | |
| * | | I I | | |
| * + +---O==================O---+ + 1125 |
| * | Crop region, 1280x720 stream | |
| * | | |
| * | | |
| * +---------+---------+---------+----------+ 1500 |
| * |
| * Crop region: (500, 375, 750, 750) (1:1 aspect ratio) |
| * |
| * 640x480 stream crop: (500, 469, 750, 562) (marked with =) |
| * 1280x720 stream crop: (500, 543, 750, 414) (marged with #) |
| * |
| * 0 1000 2000 |
| * +---------+---------+---------+----------+ |
| * | Active pixel array | |
| * | | |
| * | | |
| * + +--------------+ + 375 |
| * | O==============O | |
| * | ################ | |
| * | # # | |
| * + # # + 750 |
| * | # # | |
| * | ################ 1280x720 | |
| * | O==============O 640x480 | |
| * + +--------------+ + 1125 |
| * | Crop region | |
| * | | |
| * | | |
| * +---------+---------+---------+----------+ 1500 |
| * |
| * And a final example, a 1024x1024 square aspect ratio stream instead of the |
| * 480p stream: |
| * |
| * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio) |
| * |
| * 1024x1024 stream crop: (625, 375, 750, 750) (marked with #) |
| * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =) |
| * |
| * 0 1000 2000 |
| * +---------+---------+---------+----------+ |
| * | Active pixel array | |
| * | | |
| * | 1024x1024 stream | |
| * + +--###############--+ + 375 |
| * | | # # | | |
| * | O===================O | |
| * | I 1280x720 stream I | |
| * + I I + 750 |
| * | I I | |
| * | O===================O | |
| * | | # # | | |
| * + +--###############--+ + 1125 |
| * | Crop region | |
| * | | |
| * | | |
| * +---------+---------+---------+----------+ 1500 |
| * |
| */ |
| |
| /** |
| * S6. Error management: |
| * |
| * Camera HAL device ops functions that have a return value will all return |
| * -ENODEV / NULL in case of a serious error. This means the device cannot |
| * continue operation, and must be closed by the framework. Once this error is |
| * returned by some method, or if notify() is called with ERROR_DEVICE, only |
| * the close() method can be called successfully. All other methods will return |
| * -ENODEV / NULL. |
| * |
| * If a device op is called in the wrong sequence, for example if the framework |
| * calls configure_streams() is called before initialize(), the device must |
| * return -ENOSYS from the call, and do nothing. |
| * |
| * Transient errors in image capture must be reported through notify() as follows: |
| * |
| * - The failure of an entire capture to occur must be reported by the HAL by |
| * calling notify() with ERROR_REQUEST. Individual errors for the result |
| * metadata or the output buffers must not be reported in this case. |
| * |
| * - If the metadata for a capture cannot be produced, but some image buffers |
| * were filled, the HAL must call notify() with ERROR_RESULT. |
| * |
| * - If an output image buffer could not be filled, but either the metadata was |
| * produced or some other buffers were filled, the HAL must call notify() with |
| * ERROR_BUFFER for each failed buffer. |
| * |
| * In each of these transient failure cases, the HAL must still call |
| * process_capture_result, with valid output and input (if an input buffer was |
| * submitted) buffer_handle_t. If the result metadata could not be produced, it |
| * should be NULL. If some buffers could not be filled, they must be returned with |
| * process_capture_result in the error state, their release fences must be set to |
| * the acquire fences passed by the framework, or -1 if they have been waited on by |
| * the HAL already. |
| * |
| * Invalid input arguments result in -EINVAL from the appropriate methods. In |
| * that case, the framework must act as if that call had never been made. |
| * |
| */ |
| |
| /** |
| * S7. Key Performance Indicator (KPI) glossary: |
| * |
| * This includes some critical definitions that are used by KPI metrics. |
| * |
| * Pipeline Latency: |
| * For a given capture request, the duration from the framework calling |
| * process_capture_request to the HAL sending capture result and all buffers |
| * back by process_capture_result call. To make the Pipeline Latency measure |
| * independent of frame rate, it is measured by frame count. |
| * |
| * For example, when frame rate is 30 (fps), the frame duration (time interval |
| * between adjacent frame capture time) is 33 (ms). |
| * If it takes 5 frames for framework to get the result and buffers back for |
| * a given request, then the Pipeline Latency is 5 (frames), instead of |
| * 5 x 33 = 165 (ms). |
| * |
| * The Pipeline Latency is determined by android.request.pipelineDepth and |
| * android.request.pipelineMaxDepth, see their definitions for more details. |
| * |
| */ |
| |
| /** |
| * S8. Sample Use Cases: |
| * |
| * This includes some typical use case examples the camera HAL may support. |
| * |
| * S8.1 Zero Shutter Lag (ZSL) with CAMERA3_STREAM_BIDIRECTIONAL stream. |
| * |
| * For this use case, the bidirectional stream will be used by the framework as follows: |
| * |
| * 1. The framework includes a buffer from this stream as output buffer in a |
| * request as normal. |
| * |
| * 2. Once the HAL device returns a filled output buffer to the framework, |
| * the framework may do one of two things with the filled buffer: |
| * |
| * 2. a. The framework uses the filled data, and returns the now-used buffer |
| * to the stream queue for reuse. This behavior exactly matches the |
| * OUTPUT type of stream. |
| * |
| * 2. b. The framework wants to reprocess the filled data, and uses the |
| * buffer as an input buffer for a request. Once the HAL device has |
| * used the reprocessing buffer, it then returns it to the |
| * framework. The framework then returns the now-used buffer to the |
| * stream queue for reuse. |
| * |
| * 3. The HAL device will be given the buffer again as an output buffer for |
| * a request at some future point. |
| * |
| * For ZSL use case, the pixel format for bidirectional stream will be |
| * HAL_PIXEL_FORMAT_RAW_OPAQUE or HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED if it |
| * is listed in android.scaler.availableInputOutputFormatsMap. When |
| * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, the gralloc |
| * usage flags for the consumer endpoint will be set to GRALLOC_USAGE_HW_CAMERA_ZSL. |
| * A configuration stream list that has BIDIRECTIONAL stream used as input, will |
| * usually also have a distinct OUTPUT stream to get the reprocessing data. For example, |
| * for the ZSL use case, the stream list might be configured with the following: |
| * |
| * - A HAL_PIXEL_FORMAT_RAW_OPAQUE bidirectional stream is used |
| * as input. |
| * - And a HAL_PIXEL_FORMAT_BLOB (JPEG) output stream. |
| * |
| * S8.2 ZSL (OPAQUE) reprocessing with CAMERA3_STREAM_INPUT stream. |
| * |
| * CAMERA_DEVICE_API_VERSION_3_3: |
| * When OPAQUE_REPROCESSING capability is supported by the camera device, the INPUT stream |
| * can be used for application/framework implemented use case like Zero Shutter Lag (ZSL). |
| * This kind of stream will be used by the framework as follows: |
| * |
| * 1. Application/framework configures an opaque (RAW or YUV based) format output stream that is |
| * used to produce the ZSL output buffers. The stream pixel format will be |
| * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED. |
| * |
| * 2. Application/framework configures an opaque format input stream that is used to |
| * send the reprocessing ZSL buffers to the HAL. The stream pixel format will |
| * also be HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED. |
| * |
| * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the |
| * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB. |
| * |
| * 4. Application/framework picks a ZSL buffer from the ZSL output stream when a ZSL capture is |
| * issued by the application, and sends the data back as an input buffer in a |
| * reprocessing request, then sends to the HAL for reprocessing. |
| * |
| * 5. The HAL sends back the output YUV/JPEG result to framework. |
| * |
| * The HAL can select the actual opaque buffer format and configure the ISP pipeline |
| * appropriately based on the HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format and |
| * the gralloc usage flag GRALLOC_USAGE_HW_CAMERA_ZSL. |
| |
| * S8.3 YUV reprocessing with CAMERA3_STREAM_INPUT stream. |
| * |
| * When YUV reprocessing is supported by the HAL, the INPUT stream |
| * can be used for the YUV reprocessing use cases like lucky-shot and image fusion. |
| * This kind of stream will be used by the framework as follows: |
| * |
| * 1. Application/framework configures an YCbCr_420 format output stream that is |
| * used to produce the output buffers. |
| * |
| * 2. Application/framework configures an YCbCr_420 format input stream that is used to |
| * send the reprocessing YUV buffers to the HAL. |
| * |
| * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the |
| * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB. |
| * |
| * 4. Application/framework processes the output buffers (could be as simple as picking |
| * an output buffer directly) from the output stream when a capture is issued, and sends |
| * the data back as an input buffer in a reprocessing request, then sends to the HAL |
| * for reprocessing. |
| * |
| * 5. The HAL sends back the output YUV/JPEG result to framework. |
| * |
| */ |
| |
| /** |
| * S9. Notes on Controls and Metadata |
| * |
| * This section contains notes about the interpretation and usage of various metadata tags. |
| * |
| * S9.1 HIGH_QUALITY and FAST modes. |
| * |
| * Many camera post-processing blocks may be listed as having HIGH_QUALITY, |
| * FAST, and OFF operating modes. These blocks will typically also have an |
| * 'available modes' tag representing which of these operating modes are |
| * available on a given device. The general policy regarding implementing |
| * these modes is as follows: |
| * |
| * 1. Operating mode controls of hardware blocks that cannot be disabled |
| * must not list OFF in their corresponding 'available modes' tags. |
| * |
| * 2. OFF will always be included in their corresponding 'available modes' |
| * tag if it is possible to disable that hardware block. |
| * |
| * 3. FAST must always be included in the 'available modes' tags for all |
| * post-processing blocks supported on the device. If a post-processing |
| * block also has a slower and higher quality operating mode that does |
| * not meet the framerate requirements for FAST mode, HIGH_QUALITY should |
| * be included in the 'available modes' tag to represent this operating |
| * mode. |
| */ |
| |
| /** |
| * S10. Reprocessing flow and controls |
| * |
| * This section describes the OPAQUE and YUV reprocessing flow and controls. OPAQUE reprocessing |
| * uses an opaque format that is not directly application-visible, and the application can |
| * only select some of the output buffers and send back to HAL for reprocessing, while YUV |
| * reprocessing gives the application opportunity to process the buffers before reprocessing. |
| * |
| * S8 gives the stream configurations for the typical reprocessing uses cases, |
| * this section specifies the buffer flow and controls in more details. |
| * |
| * S10.1 OPAQUE (typically for ZSL use case) reprocessing flow and controls |
| * |
| * For OPAQUE reprocessing (e.g. ZSL) use case, after the application creates the specific |
| * output and input streams, runtime buffer flow and controls are specified as below: |
| * |
| * 1. Application starts output streaming by sending repeating requests for output |
| * opaque buffers and preview. The buffers are held by an application |
| * maintained circular buffer. The requests are based on CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG |
| * capture template, which should have all necessary settings that guarantee output |
| * frame rate is not slowed down relative to sensor output frame rate. |
| * |
| * 2. When a capture is issued, the application selects one output buffer based |
| * on application buffer selection logic, e.g. good AE and AF statistics etc. |
| * Application then creates an reprocess request based on the capture result associated |
| * with this selected buffer. The selected output buffer is now added to this reprocess |
| * request as an input buffer, the output buffer of this reprocess request should be |
| * either JPEG output buffer or YUV output buffer, or both, depending on the application |
| * choice. |
| * |
| * 3. Application then alters the reprocess settings to get best image quality. The HAL must |
| * support and only support below controls if the HAL support OPAQUE_REPROCESSING capability: |
| * - android.jpeg.* (if JPEG buffer is included as one of the output) |
| * - android.noiseReduction.mode (change to HIGH_QUALITY if it is supported) |
| * - android.edge.mode (change to HIGH_QUALITY if it is supported) |
| * All other controls must be ignored by the HAL. |
| * 4. HAL processed the input buffer and return the output buffers in the capture results |
| * as normal. |
| * |
| * S10.2 YUV reprocessing flow and controls |
| * |
| * The YUV reprocessing buffer flow is similar as OPAQUE reprocessing, with below difference: |
| * |
| * 1. Application may want to have finer granularity control of the intermediate YUV images |
| * (before reprocessing). For example, application may choose |
| * - android.noiseReduction.mode == MINIMAL |
| * to make sure the no YUV domain noise reduction has applied to the output YUV buffers, |
| * then it can do its own advanced noise reduction on them. For OPAQUE reprocessing case, this |
| * doesn't matter, as long as the final reprocessed image has the best quality. |
| * 2. Application may modify the YUV output buffer data. For example, for image fusion use |
| * case, where multiple output images are merged together to improve the signal-to-noise |
| * ratio (SNR). The input buffer may be generated from multiple buffers by the application. |
| * To avoid excessive amount of noise reduction and insufficient amount of edge enhancement |
| * being applied to the input buffer, the application can hint the HAL how much effective |
| * exposure time improvement has been done by the application, then the HAL can adjust the |
| * noise reduction and edge enhancement parameters to get best reprocessed image quality. |
| * Below tag can be used for this purpose: |
| * - android.reprocess.effectiveExposureFactor |
| * The value would be exposure time increase factor applied to the original output image, |
| * for example, if there are N image merged, the exposure time increase factor would be up |
| * to sqrt(N). See this tag spec for more details. |
| * |
| * S10.3 Reprocessing pipeline characteristics |
| * |
| * Reprocessing pipeline has below different characteristics comparing with normal output |
| * pipeline: |
| * |
| * 1. The reprocessing result can be returned ahead of the pending normal output results. But |
| * the FIFO ordering must be maintained for all reprocessing results. For example, there are |
| * below requests (A stands for output requests, B stands for reprocessing requests) |
| * being processed by the HAL: |
| * A1, A2, A3, A4, B1, A5, B2, A6... |
| * result of B1 can be returned before A1-A4, but result of B2 must be returned after B1. |
| * 2. Single input rule: For a given reprocessing request, all output buffers must be from the |
| * input buffer, rather than sensor output. For example, if a reprocess request include both |
| * JPEG and preview buffers, all output buffers must be produced from the input buffer |
| * included by the reprocessing request, rather than sensor. The HAL must not output preview |
| * buffers from sensor, while output JPEG buffer from the input buffer. |
| * 3. Input buffer will be from camera output directly (ZSL case) or indirectly(image fusion |
| * case). For the case where buffer is modified, the size will remain same. The HAL can |
| * notify CAMERA3_MSG_ERROR_REQUEST if buffer from unknown source is sent. |
| * 4. Result as reprocessing request: The HAL can expect that a reprocessing request is a copy |
| * of one of the output results with minor allowed setting changes. The HAL can notify |
| * CAMERA3_MSG_ERROR_REQUEST if a request from unknown source is issued. |
| * 5. Output buffers may not be used as inputs across the configure stream boundary, This is |
| * because an opaque stream like the ZSL output stream may have different actual image size |
| * inside of the ZSL buffer to save power and bandwidth for smaller resolution JPEG capture. |
| * The HAL may notify CAMERA3_MSG_ERROR_REQUEST if this case occurs. |
| * 6. HAL Reprocess requests error reporting during flush should follow the same rule specified |
| * by flush() method. |
| * |
| */ |
| |
| __BEGIN_DECLS |
| |
| struct camera3_device; |
| |
| /********************************************************************** |
| * |
| * Camera3 stream and stream buffer definitions. |
| * |
| * These structs and enums define the handles and contents of the input and |
| * output streams connecting the HAL to various framework and application buffer |
| * consumers. Each stream is backed by a gralloc buffer queue. |
| * |
| */ |
| |
| /** |
| * camera3_stream_type_t: |
| * |
| * The type of the camera stream, which defines whether the camera HAL device is |
| * the producer or the consumer for that stream, and how the buffers of the |
| * stream relate to the other streams. |
| */ |
| typedef enum camera3_stream_type { |
| /** |
| * This stream is an output stream; the camera HAL device will be |
| * responsible for filling buffers from this stream with newly captured or |
| * reprocessed image data. |
| */ |
| CAMERA3_STREAM_OUTPUT = 0, |
| |
| /** |
| * This stream is an input stream; the camera HAL device will be responsible |
| * for reading buffers from this stream and sending them through the camera |
| * processing pipeline, as if the buffer was a newly captured image from the |
| * imager. |
| * |
| * The pixel format for input stream can be any format reported by |
| * android.scaler.availableInputOutputFormatsMap. The pixel format of the |
| * output stream that is used to produce the reprocessing data may be any |
| * format reported by android.scaler.availableStreamConfigurations. The |
| * supported input/output stream combinations depends the camera device |
| * capabilities, see android.scaler.availableInputOutputFormatsMap for |
| * stream map details. |
| * |
| * This kind of stream is generally used to reprocess data into higher |
| * quality images (that otherwise would cause a frame rate performance |
| * loss), or to do off-line reprocessing. |
| * |
| * CAMERA_DEVICE_API_VERSION_3_3: |
| * The typical use cases are OPAQUE (typically ZSL) and YUV reprocessing, |
| * see S8.2, S8.3 and S10 for more details. |
| */ |
| CAMERA3_STREAM_INPUT = 1, |
| |
| /** |
| * This stream can be used for input and output. Typically, the stream is |
| * used as an output stream, but occasionally one already-filled buffer may |
| * be sent back to the HAL device for reprocessing. |
| * |
| * This kind of stream is meant generally for Zero Shutter Lag (ZSL) |
| * features, where copying the captured image from the output buffer to the |
| * reprocessing input buffer would be expensive. See S8.1 for more details. |
| * |
| * Note that the HAL will always be reprocessing data it produced. |
| * |
| */ |
| CAMERA3_STREAM_BIDIRECTIONAL = 2, |
| |
| /** |
| * Total number of framework-defined stream types |
| */ |
| CAMERA3_NUM_STREAM_TYPES |
| |
| } camera3_stream_type_t; |
| |
| /** |
| * camera3_stream_rotation_t: |
| * |
| * The required counterclockwise rotation of camera stream. |
| */ |
| typedef enum camera3_stream_rotation { |
| /* No rotation */ |
| CAMERA3_STREAM_ROTATION_0 = 0, |
| |
| /* Rotate by 90 degree counterclockwise */ |
| CAMERA3_STREAM_ROTATION_90 = 1, |
| |
| /* Rotate by 180 degree counterclockwise */ |
| CAMERA3_STREAM_ROTATION_180 = 2, |
| |
| /* Rotate by 270 degree counterclockwise */ |
| CAMERA3_STREAM_ROTATION_270 = 3 |
| } camera3_stream_rotation_t; |
| |
| /** |
| * camera3_stream_configuration_mode_t: |
| * |
| * This defines the general operation mode for the HAL (for a given stream configuration), where |
| * modes besides NORMAL have different semantics, and usually limit the generality of the API in |
| * exchange for higher performance in some particular area. |
| */ |
| typedef enum camera3_stream_configuration_mode { |
| /** |
| * Normal stream configuration operation mode. This is the default camera operation mode, |
| * where all semantics of HAL APIs and metadata controls apply. |
| */ |
| CAMERA3_STREAM_CONFIGURATION_NORMAL_MODE = 0, |
| |
| /** |
| * Special constrained high speed operation mode for devices that can not support high |
| * speed output in NORMAL mode. All streams in this configuration are operating at high speed |
| * mode and have different characteristics and limitations to achieve high speed output. |
| * The NORMAL mode can still be used for high speed output if the HAL can support high speed |
| * output while satisfying all the semantics of HAL APIs and metadata controls. It is |
| * recommended for the HAL to support high speed output in NORMAL mode (by advertising the high |
| * speed FPS ranges in android.control.aeAvailableTargetFpsRanges) if possible. |
| * |
| * This mode has below limitations/requirements: |
| * |
| * 1. The HAL must support up to 2 streams with sizes reported by |
| * android.control.availableHighSpeedVideoConfigurations. |
| * 2. In this mode, the HAL is expected to output up to 120fps or higher. This mode must |
| * support the targeted FPS range and size configurations reported by |
| * android.control.availableHighSpeedVideoConfigurations. |
| * 3. The HAL must support HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED output stream format. |
| * 4. To achieve efficient high speed streaming, the HAL may have to aggregate |
| * multiple frames together and send to camera device for processing where the request |
| * controls are same for all the frames in this batch (batch mode). The HAL must support |
| * max batch size and the max batch size requirements defined by |
| * android.control.availableHighSpeedVideoConfigurations. |
| * 5. In this mode, the HAL must override aeMode, awbMode, and afMode to ON, ON, and |
| * CONTINUOUS_VIDEO, respectively. All post-processing block mode controls must be |
| * overridden to be FAST. Therefore, no manual control of capture and post-processing |
| * parameters is possible. All other controls operate the same as when |
| * android.control.mode == AUTO. This means that all other android.control.* fields |
| * must continue to work, such as |
| * |
| * android.control.aeTargetFpsRange |
| * android.control.aeExposureCompensation |
| * android.control.aeLock |
| * android.control.awbLock |
| * android.control.effectMode |
| * android.control.aeRegions |
| * android.control.afRegions |
| * android.control.awbRegions |
| * android.control.afTrigger |
| * android.control.aePrecaptureTrigger |
| * |
| * Outside of android.control.*, the following controls must work: |
| * |
| * android.flash.mode (TORCH mode only, automatic flash for still capture will not work |
| * since aeMode is ON) |
| * android.lens.opticalStabilizationMode (if it is supported) |
| * android.scaler.cropRegion |
| * android.statistics.faceDetectMode (if it is supported) |
| * 6. To reduce the amount of data passed across process boundaries at |
| * high frame rate, within one batch, camera framework only propagates |
| * the last shutter notify and the last capture results (including partial |
| * results and final result) to the app. The shutter notifies and capture |
| * results for the other requests in the batch are derived by |
| * the camera framework. As a result, the HAL can return empty metadata |
| * except for the last result in the batch. |
| * |
| * For more details about high speed stream requirements, see |
| * android.control.availableHighSpeedVideoConfigurations and CONSTRAINED_HIGH_SPEED_VIDEO |
| * capability defined in android.request.availableCapabilities. |
| * |
| * This mode only needs to be supported by HALs that include CONSTRAINED_HIGH_SPEED_VIDEO in |
| * the android.request.availableCapabilities static metadata. |
| */ |
| CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE = 1, |
| |
| /** |
| * First value for vendor-defined stream configuration modes. |
| */ |
| CAMERA3_VENDOR_STREAM_CONFIGURATION_MODE_START = 0x8000 |
| } camera3_stream_configuration_mode_t; |
| |
| /** |
| * camera3_stream_t: |
| * |
| * A handle to a single camera input or output stream. A stream is defined by |
| * the framework by its buffer resolution and format, and additionally by the |
| * HAL with the gralloc usage flags and the maximum in-flight buffer count. |
| * |
| * The stream structures are owned by the framework, but pointers to a |
| * camera3_stream passed into the HAL by configure_streams() are valid until the |
| * end of the first subsequent configure_streams() call that _does not_ include |
| * that camera3_stream as an argument, or until the end of the close() call. |
| * |
| * All camera3_stream framework-controlled members are immutable once the |
| * camera3_stream is passed into configure_streams(). The HAL may only change |
| * the HAL-controlled parameters during a configure_streams() call, except for |
| * the contents of the private pointer. |
| * |
| * If a configure_streams() call returns a non-fatal error, all active streams |
| * remain valid as if configure_streams() had not been called. |
| * |
| * The endpoint of the stream is not visible to the camera HAL device. |
| * In DEVICE_API_VERSION_3_1, this was changed to share consumer usage flags |
| * on streams where the camera is a producer (OUTPUT and BIDIRECTIONAL stream |
| * types) see the usage field below. |
| */ |
| typedef struct camera3_stream { |
| |
| /***** |
| * Set by framework before configure_streams() |
| */ |
| |
| /** |
| * The type of the stream, one of the camera3_stream_type_t values. |
| */ |
| int stream_type; |
| |
| /** |
| * The width in pixels of the buffers in this stream |
| */ |
| uint32_t width; |
| |
| /** |
| * The height in pixels of the buffers in this stream |
| */ |
| uint32_t height; |
| |
| /** |
| * The pixel format for the buffers in this stream. Format is a value from |
| * the HAL_PIXEL_FORMAT_* list in system/core/include/system/graphics.h, or |
| * from device-specific headers. |
| * |
| * If HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, then the platform |
| * gralloc module will select a format based on the usage flags provided by |
| * the camera device and the other endpoint of the stream. |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * The camera HAL device must inspect the buffers handed to it in the |
| * subsequent register_stream_buffers() call to obtain the |
| * implementation-specific format details, if necessary. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * register_stream_buffers() won't be called by the framework, so the HAL |
| * should configure the ISP and sensor pipeline based purely on the sizes, |
| * usage flags, and formats for the configured streams. |
| */ |
| int format; |
| |
| /***** |
| * Set by HAL during configure_streams(). |
| */ |
| |
| /** |
| * The gralloc usage flags for this stream, as needed by the HAL. The usage |
| * flags are defined in gralloc.h (GRALLOC_USAGE_*), or in device-specific |
| * headers. |
| * |
| * For output streams, these are the HAL's producer usage flags. For input |
| * streams, these are the HAL's consumer usage flags. The usage flags from |
| * the producer and the consumer will be combined together and then passed |
| * to the platform gralloc HAL module for allocating the gralloc buffers for |
| * each stream. |
| * |
| * Version information: |
| * |
| * == CAMERA_DEVICE_API_VERSION_3_0: |
| * |
| * No initial value guaranteed when passed via configure_streams(). |
| * HAL may not use this field as input, and must write over this field |
| * with its usage flags. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * For stream_type OUTPUT and BIDIRECTIONAL, when passed via |
| * configure_streams(), the initial value of this is the consumer's |
| * usage flags. The HAL may use these consumer flags to decide stream |
| * configuration. |
| * For stream_type INPUT, when passed via configure_streams(), the initial |
| * value of this is 0. |
| * For all streams passed via configure_streams(), the HAL must write |
| * over this field with its usage flags. |
| * |
| * From Android O, the usage flag for an output stream may be bitwise |
| * combination of usage flags for multiple consumers, for the purpose of |
| * sharing one camera stream between those consumers. The HAL must fail |
| * configure_streams call with -EINVAL if the combined flags cannot be |
| * supported due to imcompatible buffer format, dataSpace, or other hardware |
| * limitations. |
| */ |
| uint64_t usage; |
| |
| /** |
| * The maximum number of buffers the HAL device may need to have dequeued at |
| * the same time. The HAL device may not have more buffers in-flight from |
| * this stream than this value. |
| */ |
| uint32_t max_buffers; |
| |
| /** |
| * A handle to HAL-private information for the stream. Will not be inspected |
| * by the framework code. |
| */ |
| void *priv; |
| |
| /** |
| * A field that describes the contents of the buffer. The format and buffer |
| * dimensions define the memory layout and structure of the stream buffers, |
| * while dataSpace defines the meaning of the data within the buffer. |
| * |
| * For most formats, dataSpace defines the color space of the image data. |
| * In addition, for some formats, dataSpace indicates whether image- or |
| * depth-based data is requested. See system/core/include/system/graphics.h |
| * for details of formats and valid dataSpace values for each format. |
| * |
| * Version information: |
| * |
| * < CAMERA_DEVICE_API_VERSION_3_3: |
| * |
| * Not defined and should not be accessed. dataSpace should be assumed to |
| * be HAL_DATASPACE_UNKNOWN, and the appropriate color space, etc, should |
| * be determined from the usage flags and the format. |
| * |
| * = CAMERA_DEVICE_API_VERSION_3_3: |
| * |
| * Always set by the camera service. HAL must use this dataSpace to |
| * configure the stream to the correct colorspace, or to select between |
| * color and depth outputs if supported. The dataspace values are the |
| * legacy definitions in graphics.h |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_4: |
| * |
| * Always set by the camera service. HAL must use this dataSpace to |
| * configure the stream to the correct colorspace, or to select between |
| * color and depth outputs if supported. The dataspace values are set |
| * using the V0 dataspace definitions in graphics.h |
| */ |
| android_dataspace_t data_space; |
| |
| /** |
| * The required output rotation of the stream, one of |
| * the camera3_stream_rotation_t values. This must be inspected by HAL along |
| * with stream width and height. For example, if the rotation is 90 degree |
| * and the stream width and height is 720 and 1280 respectively, camera service |
| * will supply buffers of size 720x1280, and HAL should capture a 1280x720 image |
| * and rotate the image by 90 degree counterclockwise. The rotation field is |
| * no-op when the stream type is input. Camera HAL must ignore the rotation |
| * field for an input stream. |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * Not defined and must not be accessed. HAL must not apply any rotation |
| * on output images. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_3: |
| * |
| * Always set by camera service. HAL must inspect this field during stream |
| * configuration and returns -EINVAL if HAL cannot perform such rotation. |
| * HAL must always support CAMERA3_STREAM_ROTATION_0, so a |
| * configure_streams() call must not fail for unsupported rotation if |
| * rotation field of all streams is CAMERA3_STREAM_ROTATION_0. |
| * |
| */ |
| int rotation; |
| |
| /** |
| * The physical camera id this stream belongs to. |
| * |
| * <= CAMERA_DEVICE_API_VERISON_3_4: |
| * |
| * Not defined and must not be accessed. |
| * |
| * >= CAMERA_DEVICE_API_VERISON_3_5: |
| * |
| * Always set by camera service. If the camera device is not a logical |
| * multi camera, or if the camera is a logical multi camera but the stream |
| * is not a physical output stream, this field will point to a 0-length |
| * string. |
| * |
| * A logical multi camera is a camera device backed by multiple physical |
| * cameras that are also exposed to the application. And for a logical |
| * multi camera, a physical output stream is an output stream specifically |
| * requested on an underlying physical camera. |
| * |
| * For an input stream, this field is guaranteed to be a 0-length string. |
| */ |
| const char* physical_camera_id; |
| |
| /* reserved for future use */ |
| void *reserved[6]; |
| |
| } camera3_stream_t; |
| |
| /** |
| * camera3_stream_configuration_t: |
| * |
| * A structure of stream definitions, used by configure_streams(). This |
| * structure defines all the output streams and the reprocessing input |
| * stream for the current camera use case. |
| */ |
| typedef struct camera3_stream_configuration { |
| /** |
| * The total number of streams requested by the framework. This includes |
| * both input and output streams. The number of streams will be at least 1, |
| * and there will be at least one output-capable stream. |
| */ |
| uint32_t num_streams; |
| |
| /** |
| * An array of camera stream pointers, defining the input/output |
| * configuration for the camera HAL device. |
| * |
| * At most one input-capable stream may be defined (INPUT or BIDIRECTIONAL) |
| * in a single configuration. |
| * |
| * At least one output-capable stream must be defined (OUTPUT or |
| * BIDIRECTIONAL). |
| */ |
| camera3_stream_t **streams; |
| |
| /** |
| * >= CAMERA_DEVICE_API_VERSION_3_3: |
| * |
| * The operation mode of streams in this configuration, one of the value |
| * defined in camera3_stream_configuration_mode_t. The HAL can use this |
| * mode as an indicator to set the stream property (e.g., |
| * camera3_stream->max_buffers) appropriately. For example, if the |
| * configuration is |
| * CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE, the HAL may |
| * want to set aside more buffers for batch mode operation (see |
| * android.control.availableHighSpeedVideoConfigurations for batch mode |
| * definition). |
| * |
| */ |
| uint32_t operation_mode; |
| |
| /** |
| * >= CAMERA_DEVICE_API_VERSION_3_5: |
| * |
| * The session metadata buffer contains the initial values of |
| * ANDROID_REQUEST_AVAILABLE_SESSION_KEYS. This field is optional |
| * and camera clients can choose to ignore it, in which case it will |
| * be set to NULL. If parameters are present, then Hal should examine |
| * the parameter values and configure its internal camera pipeline |
| * accordingly. |
| */ |
| const camera_metadata_t *session_parameters; |
| } camera3_stream_configuration_t; |
| |
| /** |
| * camera3_buffer_status_t: |
| * |
| * The current status of a single stream buffer. |
| */ |
| typedef enum camera3_buffer_status { |
| /** |
| * The buffer is in a normal state, and can be used after waiting on its |
| * sync fence. |
| */ |
| CAMERA3_BUFFER_STATUS_OK = 0, |
| |
| /** |
| * The buffer does not contain valid data, and the data in it should not be |
| * used. The sync fence must still be waited on before reusing the buffer. |
| */ |
| CAMERA3_BUFFER_STATUS_ERROR = 1 |
| |
| } camera3_buffer_status_t; |
| |
| /** |
| * camera3_stream_buffer_t: |
| * |
| * A single buffer from a camera3 stream. It includes a handle to its parent |
| * stream, the handle to the gralloc buffer itself, and sync fences |
| * |
| * The buffer does not specify whether it is to be used for input or output; |
| * that is determined by its parent stream type and how the buffer is passed to |
| * the HAL device. |
| */ |
| typedef struct camera3_stream_buffer { |
| /** |
| * The handle of the stream this buffer is associated with |
| */ |
| camera3_stream_t *stream; |
| |
| /** |
| * The native handle to the buffer |
| */ |
| buffer_handle_t *buffer; |
| |
| /** |
| * Current state of the buffer, one of the camera3_buffer_status_t |
| * values. The framework will not pass buffers to the HAL that are in an |
| * error state. In case a buffer could not be filled by the HAL, it must |
| * have its status set to CAMERA3_BUFFER_STATUS_ERROR when returned to the |
| * framework with process_capture_result(). |
| */ |
| int status; |
| |
| /** |
| * The acquire sync fence for this buffer. The HAL must wait on this fence |
| * fd before attempting to read from or write to this buffer. |
| * |
| * The framework may be set to -1 to indicate that no waiting is necessary |
| * for this buffer. |
| * |
| * When the HAL returns an output buffer to the framework with |
| * process_capture_result(), the acquire_fence must be set to -1. If the HAL |
| * never waits on the acquire_fence due to an error in filling a buffer, |
| * when calling process_capture_result() the HAL must set the release_fence |
| * of the buffer to be the acquire_fence passed to it by the framework. This |
| * will allow the framework to wait on the fence before reusing the buffer. |
| * |
| * For input buffers, the HAL must not change the acquire_fence field during |
| * the process_capture_request() call. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * When the HAL returns an input buffer to the framework with |
| * process_capture_result(), the acquire_fence must be set to -1. If the HAL |
| * never waits on input buffer acquire fence due to an error, the sync |
| * fences should be handled similarly to the way they are handled for output |
| * buffers. |
| */ |
| int acquire_fence; |
| |
| /** |
| * The release sync fence for this buffer. The HAL must set this fence when |
| * returning buffers to the framework, or write -1 to indicate that no |
| * waiting is required for this buffer. |
| * |
| * For the output buffers, the fences must be set in the output_buffers |
| * array passed to process_capture_result(). |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * For the input buffer, the release fence must be set by the |
| * process_capture_request() call. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * For the input buffer, the fences must be set in the input_buffer |
| * passed to process_capture_result(). |
| * |
| * After signaling the release_fence for this buffer, the HAL |
| * should not make any further attempts to access this buffer as the |
| * ownership has been fully transferred back to the framework. |
| * |
| * If a fence of -1 was specified then the ownership of this buffer |
| * is transferred back immediately upon the call of process_capture_result. |
| */ |
| int release_fence; |
| |
| } camera3_stream_buffer_t; |
| |
| /** |
| * camera3_stream_buffer_set_t: |
| * |
| * The complete set of gralloc buffers for a stream. This structure is given to |
| * register_stream_buffers() to allow the camera HAL device to register/map/etc |
| * newly allocated stream buffers. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * Deprecated (and not used). In particular, |
| * register_stream_buffers is also deprecated and will never be invoked. |
| * |
| */ |
| typedef struct camera3_stream_buffer_set { |
| /** |
| * The stream handle for the stream these buffers belong to |
| */ |
| camera3_stream_t *stream; |
| |
| /** |
| * The number of buffers in this stream. It is guaranteed to be at least |
| * stream->max_buffers. |
| */ |
| uint32_t num_buffers; |
| |
| /** |
| * The array of gralloc buffer handles for this stream. If the stream format |
| * is set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED, the camera HAL device |
| * should inspect the passed-in buffers to determine any platform-private |
| * pixel format information. |
| */ |
| buffer_handle_t **buffers; |
| |
| } camera3_stream_buffer_set_t; |
| |
| /** |
| * camera3_jpeg_blob: |
| * |
| * Transport header for compressed JPEG or JPEG_APP_SEGMENTS buffers in output streams. |
| * |
| * To capture JPEG or JPEG_APP_SEGMENTS images, a stream is created using the pixel format |
| * HAL_PIXEL_FORMAT_BLOB. The buffer size for the stream is calculated by the |
| * framework, based on the static metadata field android.jpeg.maxSize for JPEG, |
| * and android.jpeg.maxAppsSegments for JPEG_APP_SEGMENTS. |
| * |
| * Since compressed JPEG/JPEG_APP_SEGMENTS images are of variable size, the HAL needs to |
| * include the final size of the image using this structure inside the output |
| * stream buffer. The JPEG blob ID field must be set to CAMERA3_JPEG_BLOB_ID for |
| * JPEG and CAMERA3_JPEG_APP_SEGMENTS_BLOB_ID for APP segments. |
| * |
| * Transport header should be at the end of the output stream buffer. That |
| * means the jpeg_blob_id must start at byte[buffer_size - |
| * sizeof(camera3_jpeg_blob)], where the buffer_size is the size of gralloc buffer. |
| * The blob data itself starts at the beginning of the buffer and should be |
| * jpeg_size bytes long. HAL using this transport header for JPEG must account for |
| * it in android.jpeg.maxSize. For JPEG APP segments, camera framework makes |
| * sure that the output stream buffer is large enough for the transport header. |
| */ |
| typedef struct camera3_jpeg_blob { |
| uint16_t jpeg_blob_id; |
| uint32_t jpeg_size; |
| } camera3_jpeg_blob_t; |
| |
| enum { |
| CAMERA3_JPEG_BLOB_ID = 0x00FF, |
| CAMERA3_JPEG_APP_SEGMENTS_BLOB_ID = 0x0100, |
| }; |
| |
| /********************************************************************** |
| * |
| * Message definitions for the HAL notify() callback. |
| * |
| * These definitions are used for the HAL notify callback, to signal |
| * asynchronous events from the HAL device to the Android framework. |
| * |
| */ |
| |
| /** |
| * camera3_msg_type: |
| * |
| * Indicates the type of message sent, which specifies which member of the |
| * message union is valid. |
| * |
| */ |
| typedef enum camera3_msg_type { |
| /** |
| * An error has occurred. camera3_notify_msg.message.error contains the |
| * error information. |
| */ |
| CAMERA3_MSG_ERROR = 1, |
| |
| /** |
| * The exposure of a given request or processing a reprocess request has |
| * begun. camera3_notify_msg.message.shutter contains the information |
| * the capture. |
| */ |
| CAMERA3_MSG_SHUTTER = 2, |
| |
| /** |
| * Number of framework message types |
| */ |
| CAMERA3_NUM_MESSAGES |
| |
| } camera3_msg_type_t; |
| |
| /** |
| * Defined error codes for CAMERA_MSG_ERROR |
| */ |
| typedef enum camera3_error_msg_code { |
| /** |
| * A serious failure occured. No further frames or buffer streams will |
| * be produced by the device. Device should be treated as closed. The |
| * client must reopen the device to use it again. The frame_number field |
| * is unused. |
| */ |
| CAMERA3_MSG_ERROR_DEVICE = 1, |
| |
| /** |
| * An error has occurred in processing a request. No output (metadata or |
| * buffers) will be produced for this request. The frame_number field |
| * specifies which request has been dropped. Subsequent requests are |
| * unaffected, and the device remains operational. |
| */ |
| CAMERA3_MSG_ERROR_REQUEST = 2, |
| |
| /** |
| * An error has occurred in producing an output result metadata buffer |
| * for a request, but output stream buffers for it will still be |
| * available. Subsequent requests are unaffected, and the device remains |
| * operational. The frame_number field specifies the request for which |
| * result metadata won't be available. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_6: |
| * |
| * In case the result metadata is absent for a logical camera device, then the |
| * error_stream pointer must be set to NULL. |
| * If the result metadata cannot be produced for a physical camera device, then |
| * error_stream must contain a pointer to a respective stream associated with |
| * that physical device. |
| */ |
| CAMERA3_MSG_ERROR_RESULT = 3, |
| |
| /** |
| * An error has occurred in placing an output buffer into a stream for a |
| * request. The frame metadata and other buffers may still be |
| * available. Subsequent requests are unaffected, and the device remains |
| * operational. The frame_number field specifies the request for which the |
| * buffer was dropped, and error_stream contains a pointer to the stream |
| * that dropped the frame. |
| */ |
| CAMERA3_MSG_ERROR_BUFFER = 4, |
| |
| /** |
| * Number of error types |
| */ |
| CAMERA3_MSG_NUM_ERRORS |
| |
| } camera3_error_msg_code_t; |
| |
| /** |
| * camera3_error_msg_t: |
| * |
| * Message contents for CAMERA3_MSG_ERROR |
| */ |
| typedef struct camera3_error_msg { |
| /** |
| * Frame number of the request the error applies to. 0 if the frame number |
| * isn't applicable to the error. |
| */ |
| uint32_t frame_number; |
| |
| /** |
| * Pointer to the stream that had a failure. NULL if the stream isn't |
| * applicable to the error. |
| */ |
| camera3_stream_t *error_stream; |
| |
| /** |
| * The code for this error; one of the CAMERA_MSG_ERROR enum values. |
| */ |
| int error_code; |
| |
| } camera3_error_msg_t; |
| |
| /** |
| * camera3_shutter_msg_t: |
| * |
| * Message contents for CAMERA3_MSG_SHUTTER |
| */ |
| typedef struct camera3_shutter_msg { |
| /** |
| * Frame number of the request that has begun exposure or reprocessing. |
| */ |
| uint32_t frame_number; |
| |
| /** |
| * Timestamp for the start of capture. For a reprocess request, this must |
| * be input image's start of capture. This must match the capture result |
| * metadata's sensor exposure start timestamp. |
| */ |
| uint64_t timestamp; |
| |
| } camera3_shutter_msg_t; |
| |
| /** |
| * camera3_notify_msg_t: |
| * |
| * The message structure sent to camera3_callback_ops_t.notify() |
| */ |
| typedef struct camera3_notify_msg { |
| |
| /** |
| * The message type. One of camera3_notify_msg_type, or a private extension. |
| */ |
| int type; |
| |
| union { |
| /** |
| * Error message contents. Valid if type is CAMERA3_MSG_ERROR |
| */ |
| camera3_error_msg_t error; |
| |
| /** |
| * Shutter message contents. Valid if type is CAMERA3_MSG_SHUTTER |
| */ |
| camera3_shutter_msg_t shutter; |
| |
| /** |
| * Generic message contents. Used to ensure a minimum size for custom |
| * message types. |
| */ |
| uint8_t generic[32]; |
| } message; |
| |
| } camera3_notify_msg_t; |
| |
| |
| /********************************************************************** |
| * |
| * Types definition for request_stream_buffers() callback. |
| * |
| */ |
| |
| /** |
| * camera3_buffer_request_status_t: |
| * |
| * The overall buffer request status returned by request_stream_buffers() |
| */ |
| typedef enum camera3_buffer_request_status { |
| /** |
| * request_stream_buffers() call succeeded and all requested buffers are |
| * returned. |
| */ |
| CAMERA3_BUF_REQ_OK = 0, |
| |
| /** |
| * request_stream_buffers() call failed for some streams. |
| * Check per stream status for each returned camera3_stream_buffer_ret_t. |
| */ |
| CAMERA3_BUF_REQ_FAILED_PARTIAL = 1, |
| |
| /** |
| * request_stream_buffers() call failed for all streams and no buffers are |
| * returned at all. Camera service is about to or is performing |
| * configure_streams() call. HAL must wait until next configure_streams() |
| * call is finished before requesting buffers again. |
| */ |
| CAMERA3_BUF_REQ_FAILED_CONFIGURING = 2, |
| |
| /** |
| * request_stream_buffers() call failed for all streams and no buffers are |
| * returned at all. Failure due to bad camera3_buffer_request input, eg: |
| * unknown stream or repeated stream in the list of buffer requests. |
| */ |
| CAMERA3_BUF_REQ_FAILED_ILLEGAL_ARGUMENTS = 3, |
| |
| /** |
| * request_stream_buffers() call failed for all streams and no buffers are |
| * returned at all. This can happen for unknown reasons or a combination |
| * of different failure reasons per stream. For the latter case, caller can |
| * check per stream failure reason returned in camera3_stream_buffer_ret. |
| */ |
| CAMERA3_BUF_REQ_FAILED_UNKNOWN = 4, |
| |
| /** |
| * Number of buffer request status |
| */ |
| CAMERA3_BUF_REQ_NUM_STATUS |
| |
| } camera3_buffer_request_status_t; |
| |
| /** |
| * camera3_stream_buffer_req_status_t: |
| * |
| * The per stream buffer request status returned by request_stream_buffers() |
| */ |
| typedef enum camera3_stream_buffer_req_status { |
| /** |
| * Get buffer succeeds and all requested buffers are returned. |
| */ |
| CAMERA3_PS_BUF_REQ_OK = 0, |
| |
| /** |
| * Get buffer failed due to timeout waiting for an available buffer. This is |
| * likely due to the client application holding too many buffers, or the |
| * system is under memory pressure. |
| * This is not a fatal error. HAL can try to request buffer for this stream |
| * later. If HAL cannot get a buffer for certain capture request in time |
| * due to this error, HAL can send an ERROR_REQUEST to camera service and |
| * drop processing that request. |
| */ |
| CAMERA3_PS_BUF_REQ_NO_BUFFER_AVAILABLE = 1, |
| |
| /** |
| * Get buffer failed due to HAL has reached its maxBuffer count. This is not |
| * a fatal error. HAL can try to request buffer for this stream again after |
| * it returns at least one buffer of that stream to camera service. |
| */ |
| CAMERA3_PS_BUF_REQ_MAX_BUFFER_EXCEEDED = 2, |
| |
| /** |
| * Get buffer failed due to the stream is disconnected by client |
| * application, has been removed, or not recognized by camera service. |
| * This means application is no longer interested in this stream. |
| * Requesting buffer for this stream will never succeed after this error is |
| * returned. HAL must safely return all buffers of this stream after |
| * getting this error. If HAL gets another capture request later targeting |
| * a disconnected stream, HAL must send an ERROR_REQUEST to camera service |
| * and drop processing that request. |
| */ |
| CAMERA3_PS_BUF_REQ_STREAM_DISCONNECTED = 3, |
| |
| /** |
| * Get buffer failed for unknown reason. This is a fatal error and HAL must |
| * send ERROR_DEVICE to camera service and be ready to be closed. |
| */ |
| CAMERA3_PS_BUF_REQ_UNKNOWN_ERROR = 4, |
| |
| /** |
| * Number of buffer request status |
| */ |
| CAMERA3_PS_BUF_REQ_NUM_STATUS |
| } camera3_stream_buffer_req_status_t; |
| |
| typedef struct camera3_buffer_request { |
| /** |
| * The stream HAL wants to request buffer from |
| */ |
| camera3_stream_t *stream; |
| |
| /** |
| * The number of buffers HAL requested |
| */ |
| uint32_t num_buffers_requested; |
| } camera3_buffer_request_t; |
| |
| typedef struct camera3_stream_buffer_ret { |
| /** |
| * The stream HAL wants to request buffer from |
| */ |
| camera3_stream_t *stream; |
| |
| /** |
| * The status of buffer request of this stream |
| */ |
| camera3_stream_buffer_req_status_t status; |
| |
| /** |
| * Number of output buffers returned. Must be 0 when above status is not |
| * CAMERA3_PS_BUF_REQ_OK; otherwise the value must be equal to |
| * num_buffers_requested in the corresponding camera3_buffer_request_t |
| */ |
| uint32_t num_output_buffers; |
| |
| /** |
| * The returned output buffers for the stream. |
| * Caller of request_stream_buffers() should supply this with enough memory |
| * (num_buffers_requested * sizeof(camera3_stream_buffer_t)) |
| */ |
| camera3_stream_buffer_t *output_buffers; |
| } camera3_stream_buffer_ret_t; |
| |
| |
| /********************************************************************** |
| * |
| * Capture request/result definitions for the HAL process_capture_request() |
| * method, and the process_capture_result() callback. |
| * |
| */ |
| |
| /** |
| * camera3_request_template_t: |
| * |
| * Available template types for |
| * camera3_device_ops.construct_default_request_settings() |
| */ |
| typedef enum camera3_request_template { |
| /** |
| * Standard camera preview operation with 3A on auto. |
| */ |
| CAMERA3_TEMPLATE_PREVIEW = 1, |
| |
| /** |
| * Standard camera high-quality still capture with 3A and flash on auto. |
| */ |
| CAMERA3_TEMPLATE_STILL_CAPTURE = 2, |
| |
| /** |
| * Standard video recording plus preview with 3A on auto, torch off. |
| */ |
| CAMERA3_TEMPLATE_VIDEO_RECORD = 3, |
| |
| /** |
| * High-quality still capture while recording video. Application will |
| * include preview, video record, and full-resolution YUV or JPEG streams in |
| * request. Must not cause stuttering on video stream. 3A on auto. |
| */ |
| CAMERA3_TEMPLATE_VIDEO_SNAPSHOT = 4, |
| |
| /** |
| * Zero-shutter-lag mode. Application will request preview and |
| * full-resolution data for each frame, and reprocess it to JPEG when a |
| * still image is requested by user. Settings should provide highest-quality |
| * full-resolution images without compromising preview frame rate. 3A on |
| * auto. |
| */ |
| CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG = 5, |
| |
| /** |
| * A basic template for direct application control of capture |
| * parameters. All automatic control is disabled (auto-exposure, auto-white |
| * balance, auto-focus), and post-processing parameters are set to preview |
| * quality. The manual capture parameters (exposure, sensitivity, etc.) |
| * are set to reasonable defaults, but should be overridden by the |
| * application depending on the intended use case. |
| */ |
| CAMERA3_TEMPLATE_MANUAL = 6, |
| |
| /* Total number of templates */ |
| CAMERA3_TEMPLATE_COUNT, |
| |
| /** |
| * First value for vendor-defined request templates |
| */ |
| CAMERA3_VENDOR_TEMPLATE_START = 0x40000000 |
| |
| } camera3_request_template_t; |
| |
| /** |
| * camera3_capture_request_t: |
| * |
| * A single request for image capture/buffer reprocessing, sent to the Camera |
| * HAL device by the framework in process_capture_request(). |
| * |
| * The request contains the settings to be used for this capture, and the set of |
| * output buffers to write the resulting image data in. It may optionally |
| * contain an input buffer, in which case the request is for reprocessing that |
| * input buffer instead of capturing a new image with the camera sensor. The |
| * capture is identified by the frame_number. |
| * |
| * In response, the camera HAL device must send a camera3_capture_result |
| * structure asynchronously to the framework, using the process_capture_result() |
| * callback. |
| */ |
| typedef struct camera3_capture_request { |
| /** |
| * The frame number is an incrementing integer set by the framework to |
| * uniquely identify this capture. It needs to be returned in the result |
| * call, and is also used to identify the request in asynchronous |
| * notifications sent to camera3_callback_ops_t.notify(). |
| */ |
| uint32_t frame_number; |
| |
| /** |
| * The settings buffer contains the capture and processing parameters for |
| * the request. As a special case, a NULL settings buffer indicates that the |
| * settings are identical to the most-recently submitted capture request. A |
| * NULL buffer cannot be used as the first submitted request after a |
| * configure_streams() call. |
| */ |
| const camera_metadata_t *settings; |
| |
| /** |
| * The input stream buffer to use for this request, if any. |
| * |
| * If input_buffer is NULL, then the request is for a new capture from the |
| * imager. If input_buffer is valid, the request is for reprocessing the |
| * image contained in input_buffer. |
| * |
| * In the latter case, the HAL must set the release_fence of the |
| * input_buffer to a valid sync fence, or to -1 if the HAL does not support |
| * sync, before process_capture_request() returns. |
| * |
| * The HAL is required to wait on the acquire sync fence of the input buffer |
| * before accessing it. |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * Any input buffer included here will have been registered with the HAL |
| * through register_stream_buffers() before its inclusion in a request. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * The buffers will not have been pre-registered with the HAL. |
| * Subsequent requests may reuse buffers, or provide entirely new buffers. |
| */ |
| camera3_stream_buffer_t *input_buffer; |
| |
| /** |
| * The number of output buffers for this capture request. Must be at least |
| * 1. |
| */ |
| uint32_t num_output_buffers; |
| |
| /** |
| * An array of num_output_buffers stream buffers, to be filled with image |
| * data from this capture/reprocess. The HAL must wait on the acquire fences |
| * of each stream buffer before writing to them. |
| * |
| * The HAL takes ownership of the actual buffer_handle_t entries in |
| * output_buffers; the framework does not access them until they are |
| * returned in a camera3_capture_result_t. |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * All the buffers included here will have been registered with the HAL |
| * through register_stream_buffers() before their inclusion in a request. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * Any or all of the buffers included here may be brand new in this |
| * request (having never before seen by the HAL). |
| */ |
| const camera3_stream_buffer_t *output_buffers; |
| |
| /** |
| * <= CAMERA_DEVICE_API_VERISON_3_4: |
| * |
| * Not defined and must not be accessed. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_5: |
| * The number of physical camera settings to be applied. If 'num_physcam_settings' |
| * equals 0 or a physical device is not included, then Hal must decide the |
| * specific physical device settings based on the default 'settings'. |
| */ |
| uint32_t num_physcam_settings; |
| |
| /** |
| * <= CAMERA_DEVICE_API_VERISON_3_4: |
| * |
| * Not defined and must not be accessed. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_5: |
| * The physical camera ids. The array will contain 'num_physcam_settings' |
| * camera id strings for all physical devices that have specific settings. |
| * In case some id is invalid, the process capture request must fail and return |
| * -EINVAL. |
| */ |
| const char **physcam_id; |
| |
| /** |
| * <= CAMERA_DEVICE_API_VERISON_3_4: |
| * |
| * Not defined and must not be accessed. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_5: |
| * The capture settings for the physical cameras. The array will contain |
| * 'num_physcam_settings' settings for invididual physical devices. In |
| * case the settings at some particular index are empty, the process capture |
| * request must fail and return -EINVAL. |
| */ |
| const camera_metadata_t **physcam_settings; |
| |
| } camera3_capture_request_t; |
| |
| /** |
| * camera3_capture_result_t: |
| * |
| * The result of a single capture/reprocess by the camera HAL device. This is |
| * sent to the framework asynchronously with process_capture_result(), in |
| * response to a single capture request sent to the HAL with |
| * process_capture_request(). Multiple process_capture_result() calls may be |
| * performed by the HAL for each request. |
| * |
| * Each call, all with the same frame |
| * number, may contain some subset of the output buffers, and/or the result |
| * metadata. The metadata may only be provided once for a given frame number; |
| * all other calls must set the result metadata to NULL. |
| * |
| * The result structure contains the output metadata from this capture, and the |
| * set of output buffers that have been/will be filled for this capture. Each |
| * output buffer may come with a release sync fence that the framework will wait |
| * on before reading, in case the buffer has not yet been filled by the HAL. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * The metadata may be provided multiple times for a single frame number. The |
| * framework will accumulate together the final result set by combining each |
| * partial result together into the total result set. |
| * |
| * If an input buffer is given in a request, the HAL must return it in one of |
| * the process_capture_result calls, and the call may be to just return the input |
| * buffer, without metadata and output buffers; the sync fences must be handled |
| * the same way they are done for output buffers. |
| * |
| * |
| * Performance considerations: |
| * |
| * Applications will also receive these partial results immediately, so sending |
| * partial results is a highly recommended performance optimization to avoid |
| * the total pipeline latency before sending the results for what is known very |
| * early on in the pipeline. |
| * |
| * A typical use case might be calculating the AF state halfway through the |
| * pipeline; by sending the state back to the framework immediately, we get a |
| * 50% performance increase and perceived responsiveness of the auto-focus. |
| * |
| */ |
| typedef struct camera3_capture_result { |
| /** |
| * The frame number is an incrementing integer set by the framework in the |
| * submitted request to uniquely identify this capture. It is also used to |
| * identify the request in asynchronous notifications sent to |
| * camera3_callback_ops_t.notify(). |
| */ |
| uint32_t frame_number; |
| |
| /** |
| * The result metadata for this capture. This contains information about the |
| * final capture parameters, the state of the capture and post-processing |
| * hardware, the state of the 3A algorithms, if enabled, and the output of |
| * any enabled statistics units. |
| * |
| * Only one call to process_capture_result() with a given frame_number may |
| * include the result metadata. All other calls for the same frame_number |
| * must set this to NULL. |
| * |
| * If there was an error producing the result metadata, result must be an |
| * empty metadata buffer, and notify() must be called with ERROR_RESULT. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * Multiple calls to process_capture_result() with a given frame_number |
| * may include the result metadata. |
| * |
| * Partial metadata submitted should not include any metadata key returned |
| * in a previous partial result for a given frame. Each new partial result |
| * for that frame must also set a distinct partial_result value. |
| * |
| * If notify has been called with ERROR_RESULT, all further partial |
| * results for that frame are ignored by the framework. |
| */ |
| const camera_metadata_t *result; |
| |
| /** |
| * The number of output buffers returned in this result structure. Must be |
| * less than or equal to the matching capture request's count. If this is |
| * less than the buffer count in the capture request, at least one more call |
| * to process_capture_result with the same frame_number must be made, to |
| * return the remaining output buffers to the framework. This may only be |
| * zero if the structure includes valid result metadata or an input buffer |
| * is returned in this result. |
| */ |
| uint32_t num_output_buffers; |
| |
| /** |
| * The handles for the output stream buffers for this capture. They may not |
| * yet be filled at the time the HAL calls process_capture_result(); the |
| * framework will wait on the release sync fences provided by the HAL before |
| * reading the buffers. |
| * |
| * The HAL must set the stream buffer's release sync fence to a valid sync |
| * fd, or to -1 if the buffer has already been filled. |
| * |
| * If the HAL encounters an error while processing the buffer, and the |
| * buffer is not filled, the buffer's status field must be set to |
| * CAMERA3_BUFFER_STATUS_ERROR. If the HAL did not wait on the acquire fence |
| * before encountering the error, the acquire fence should be copied into |
| * the release fence, to allow the framework to wait on the fence before |
| * reusing the buffer. |
| * |
| * The acquire fence must be set to -1 for all output buffers. If |
| * num_output_buffers is zero, this may be NULL. In that case, at least one |
| * more process_capture_result call must be made by the HAL to provide the |
| * output buffers. |
| * |
| * When process_capture_result is called with a new buffer for a frame, |
| * all previous frames' buffers for that corresponding stream must have been |
| * already delivered (the fences need not have yet been signaled). |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * Gralloc buffers for a frame may be sent to framework before the |
| * corresponding SHUTTER-notify. |
| * |
| * Performance considerations: |
| * |
| * Buffers delivered to the framework will not be dispatched to the |
| * application layer until a start of exposure timestamp has been received |
| * via a SHUTTER notify() call. It is highly recommended to |
| * dispatch that call as early as possible. |
| */ |
| const camera3_stream_buffer_t *output_buffers; |
| |
| /** |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * The handle for the input stream buffer for this capture. It may not |
| * yet be consumed at the time the HAL calls process_capture_result(); the |
| * framework will wait on the release sync fences provided by the HAL before |
| * reusing the buffer. |
| * |
| * The HAL should handle the sync fences the same way they are done for |
| * output_buffers. |
| * |
| * Only one input buffer is allowed to be sent per request. Similarly to |
| * output buffers, the ordering of returned input buffers must be |
| * maintained by the HAL. |
| * |
| * Performance considerations: |
| * |
| * The input buffer should be returned as early as possible. If the HAL |
| * supports sync fences, it can call process_capture_result to hand it back |
| * with sync fences being set appropriately. If the sync fences are not |
| * supported, the buffer can only be returned when it is consumed, which |
| * may take long time; the HAL may choose to copy this input buffer to make |
| * the buffer return sooner. |
| */ |
| const camera3_stream_buffer_t *input_buffer; |
| |
| /** |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * In order to take advantage of partial results, the HAL must set the |
| * static metadata android.request.partialResultCount to the number of |
| * partial results it will send for each frame. |
| * |
| * Each new capture result with a partial result must set |
| * this field (partial_result) to a distinct inclusive value between |
| * 1 and android.request.partialResultCount. |
| * |
| * HALs not wishing to take advantage of this feature must not |
| * set an android.request.partialResultCount or partial_result to a value |
| * other than 1. |
| * |
| * This value must be set to 0 when a capture result contains buffers only |
| * and no metadata. |
| */ |
| uint32_t partial_result; |
| |
| /** |
| * >= CAMERA_DEVICE_API_VERSION_3_5: |
| * |
| * Specifies the number of physical camera metadata this capture result |
| * contains. It must be equal to the number of physical cameras being |
| * requested from. |
| * |
| * If the current camera device is not a logical multi-camera, or the |
| * corresponding capture_request doesn't request on any physical camera, |
| * this field must be 0. |
| */ |
| uint32_t num_physcam_metadata; |
| |
| /** |
| * >= CAMERA_DEVICE_API_VERSION_3_5: |
| * |
| * An array of strings containing the physical camera ids for the returned |
| * physical camera metadata. The length of the array is |
| * num_physcam_metadata. |
| */ |
| const char **physcam_ids; |
| |
| /** |
| * >= CAMERA_DEVICE_API_VERSION_3_5: |
| * |
| * The array of physical camera metadata for the physical cameras being |
| * requested upon. This array should have a 1-to-1 mapping with the |
| * physcam_ids. The length of the array is num_physcam_metadata. |
| */ |
| const camera_metadata_t **physcam_metadata; |
| |
| } camera3_capture_result_t; |
| |
| /********************************************************************** |
| * |
| * Callback methods for the HAL to call into the framework. |
| * |
| * These methods are used to return metadata and image buffers for a completed |
| * or failed captures, and to notify the framework of asynchronous events such |
| * as errors. |
| * |
| * The framework will not call back into the HAL from within these callbacks, |
| * and these calls will not block for extended periods. |
| * |
| */ |
| typedef struct camera3_callback_ops { |
| |
| /** |
| * process_capture_result: |
| * |
| * Send results from a completed capture to the framework. |
| * process_capture_result() may be invoked multiple times by the HAL in |
| * response to a single capture request. This allows, for example, the |
| * metadata and low-resolution buffers to be returned in one call, and |
| * post-processed JPEG buffers in a later call, once it is available. Each |
| * call must include the frame number of the request it is returning |
| * metadata or buffers for. |
| * |
| * A component (buffer or metadata) of the complete result may only be |
| * included in one process_capture_result call. A buffer for each stream, |
| * and the result metadata, must be returned by the HAL for each request in |
| * one of the process_capture_result calls, even in case of errors producing |
| * some of the output. A call to process_capture_result() with neither |
| * output buffers or result metadata is not allowed. |
| * |
| * The order of returning metadata and buffers for a single result does not |
| * matter, but buffers for a given stream must be returned in FIFO order. So |
| * the buffer for request 5 for stream A must always be returned before the |
| * buffer for request 6 for stream A. This also applies to the result |
| * metadata; the metadata for request 5 must be returned before the metadata |
| * for request 6. |
| * |
| * However, different streams are independent of each other, so it is |
| * acceptable and expected that the buffer for request 5 for stream A may be |
| * returned after the buffer for request 6 for stream B is. And it is |
| * acceptable that the result metadata for request 6 for stream B is |
| * returned before the buffer for request 5 for stream A is. |
| * |
| * The HAL retains ownership of result structure, which only needs to be |
| * valid to access during this call. The framework will copy whatever it |
| * needs before this call returns. |
| * |
| * The output buffers do not need to be filled yet; the framework will wait |
| * on the stream buffer release sync fence before reading the buffer |
| * data. Therefore, this method should be called by the HAL as soon as |
| * possible, even if some or all of the output buffers are still in |
| * being filled. The HAL must include valid release sync fences into each |
| * output_buffers stream buffer entry, or -1 if that stream buffer is |
| * already filled. |
| * |
| * If the result buffer cannot be constructed for a request, the HAL should |
| * return an empty metadata buffer, but still provide the output buffers and |
| * their sync fences. In addition, notify() must be called with an |
| * ERROR_RESULT message. |
| * |
| * If an output buffer cannot be filled, its status field must be set to |
| * STATUS_ERROR. In addition, notify() must be called with a ERROR_BUFFER |
| * message. |
| * |
| * If the entire capture has failed, then this method still needs to be |
| * called to return the output buffers to the framework. All the buffer |
| * statuses should be STATUS_ERROR, and the result metadata should be an |
| * empty buffer. In addition, notify() must be called with a ERROR_REQUEST |
| * message. In this case, individual ERROR_RESULT/ERROR_BUFFER messages |
| * should not be sent. |
| * |
| * Performance requirements: |
| * |
| * This is a non-blocking call. The framework will return this call in 5ms. |
| * |
| * The pipeline latency (see S7 for definition) should be less than or equal to |
| * 4 frame intervals, and must be less than or equal to 8 frame intervals. |
| * |
| */ |
| void (*process_capture_result)(const struct camera3_callback_ops *, |
| const camera3_capture_result_t *result); |
| |
| /** |
| * notify: |
| * |
| * Asynchronous notification callback from the HAL, fired for various |
| * reasons. Only for information independent of frame capture, or that |
| * require specific timing. The ownership of the message structure remains |
| * with the HAL, and the msg only needs to be valid for the duration of this |
| * call. |
| * |
| * Multiple threads may call notify() simultaneously. |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * The notification for the start of exposure for a given request must be |
| * sent by the HAL before the first call to process_capture_result() for |
| * that request is made. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * Buffers delivered to the framework will not be dispatched to the |
| * application layer until a start of exposure timestamp (or input image's |
| * start of exposure timestamp for a reprocess request) has been received |
| * via a SHUTTER notify() call. It is highly recommended to dispatch this |
| * call as early as possible. |
| * |
| * ------------------------------------------------------------------------ |
| * Performance requirements: |
| * |
| * This is a non-blocking call. The framework will return this call in 5ms. |
| */ |
| void (*notify)(const struct camera3_callback_ops *, |
| const camera3_notify_msg_t *msg); |
| |
| /** |
| * request_stream_buffers: |
| * |
| * <= CAMERA_DEVICE_API_VERISON_3_5: |
| * |
| * DO NOT USE: not defined and must be NULL. |
| * |
| * >= CAMERA_DEVICE_API_VERISON_3_6: |
| * |
| * Synchronous callback for HAL to ask for output buffer from camera service. |
| * |
| * This call may be serialized in camera service so it is strongly |
| * recommended to only call this method from one thread. |
| * |
| * When camera device advertises |
| * (android.info.supportedBufferManagementVersion == |
| * ANDROID_INFO_SUPPORTED_BUFFER_MANAGEMENT_VERSION_HIDL_DEVICE_3_5), HAL |
| * can use this method to request buffers from camera service. |
| * |
| * Caller is responsible for allocating enough memory for returned_buf_reqs |
| * argument (num_buffer_reqs * sizeof(camera3_stream_buffer_ret_t)) bytes |
| * and also the memory for the output_buffers field in each |
| * camera3_stream_buffer_ret_t |
| * (num_buffers_requested * sizeof(camera3_stream_buffer_t)) bytes |
| * |
| * Performance requirements: |
| * This is a blocking call that takes more time with more buffers requested. |
| * HAL should not request large amount of buffers on a latency critical code |
| * path. It is highly recommended to use a dedicated thread to perform |
| * all requestStreamBuffer calls, and adjust the thread priority and/or |
| * timing of making the call in order for buffers to arrive before HAL is |
| * ready to fill the buffer. |
| */ |
| camera3_buffer_request_status_t (*request_stream_buffers)( |
| const struct camera3_callback_ops *, |
| uint32_t num_buffer_reqs, |
| const camera3_buffer_request_t *buffer_reqs, |
| /*out*/uint32_t *num_returned_buf_reqs, |
| /*out*/camera3_stream_buffer_ret_t *returned_buf_reqs); |
| |
| /** |
| * return_stream_buffers: |
| * |
| * <= CAMERA_DEVICE_API_VERISON_3_5: |
| * |
| * DO NOT USE: not defined and must be NULL. |
| * |
| * >= CAMERA_DEVICE_API_VERISON_3_6: |
| * |
| * Synchronous callback for HAL to return output buffers to camera service. |
| * |
| * If this method is called during a configure_streams() call, it will be |
| * blocked until camera service finishes the ongoing configure_streams() call. |
| */ |
| void (*return_stream_buffers)( |
| const struct camera3_callback_ops *, |
| uint32_t num_buffers, |
| const camera3_stream_buffer_t* const* buffers); |
| |
| } camera3_callback_ops_t; |
| |
| /********************************************************************** |
| * |
| * Camera device operations |
| * |
| */ |
| typedef struct camera3_device_ops { |
| |
| /** |
| * initialize: |
| * |
| * One-time initialization to pass framework callback function pointers to |
| * the HAL. Will be called once after a successful open() call, before any |
| * other functions are called on the camera3_device_ops structure. |
| * |
| * Performance requirements: |
| * |
| * This should be a non-blocking call. The HAL should return from this call |
| * in 5ms, and must return from this call in 10ms. |
| * |
| * Return values: |
| * |
| * 0: On successful initialization |
| * |
| * -ENODEV: If initialization fails. Only close() can be called successfully |
| * by the framework after this. |
| */ |
| int (*initialize)(const struct camera3_device *, |
| const camera3_callback_ops_t *callback_ops); |
| |
| /********************************************************************** |
| * Stream management |
| */ |
| |
| /** |
| * configure_streams: |
| * |
| * CAMERA_DEVICE_API_VERSION_3_0 only: |
| * |
| * Reset the HAL camera device processing pipeline and set up new input and |
| * output streams. This call replaces any existing stream configuration with |
| * the streams defined in the stream_list. This method will be called at |
| * least once after initialize() before a request is submitted with |
| * process_capture_request(). |
| * |
| * The stream_list must contain at least one output-capable stream, and may |
| * not contain more than one input-capable stream. |
| * |
| * The stream_list may contain streams that are also in the currently-active |
| * set of streams (from the previous call to configure_stream()). These |
| * streams will already have valid values for usage, max_buffers, and the |
| * private pointer. |
| * |
| * If such a stream has already had its buffers registered, |
| * register_stream_buffers() will not be called again for the stream, and |
| * buffers from the stream can be immediately included in input requests. |
| * |
| * If the HAL needs to change the stream configuration for an existing |
| * stream due to the new configuration, it may rewrite the values of usage |
| * and/or max_buffers during the configure call. |
| * |
| * The framework will detect such a change, and will then reallocate the |
| * stream buffers, and call register_stream_buffers() again before using |
| * buffers from that stream in a request. |
| * |
| * If a currently-active stream is not included in stream_list, the HAL may |
| * safely remove any references to that stream. It will not be reused in a |
| * later configure() call by the framework, and all the gralloc buffers for |
| * it will be freed after the configure_streams() call returns. |
| * |
| * The stream_list structure is owned by the framework, and may not be |
| * accessed once this call completes. The address of an individual |
| * camera3_stream_t structure will remain valid for access by the HAL until |
| * the end of the first configure_stream() call which no longer includes |
| * that camera3_stream_t in the stream_list argument. The HAL may not change |
| * values in the stream structure outside of the private pointer, except for |
| * the usage and max_buffers members during the configure_streams() call |
| * itself. |
| * |
| * If the stream is new, the usage, max_buffer, and private pointer fields |
| * of the stream structure will all be set to 0. The HAL device must set |
| * these fields before the configure_streams() call returns. These fields |
| * are then used by the framework and the platform gralloc module to |
| * allocate the gralloc buffers for each stream. |
| * |
| * Before such a new stream can have its buffers included in a capture |
| * request, the framework will call register_stream_buffers() with that |
| * stream. However, the framework is not required to register buffers for |
| * _all_ streams before submitting a request. This allows for quick startup |
| * of (for example) a preview stream, with allocation for other streams |
| * happening later or concurrently. |
| * |
| * ------------------------------------------------------------------------ |
| * CAMERA_DEVICE_API_VERSION_3_1 only: |
| * |
| * Reset the HAL camera device processing pipeline and set up new input and |
| * output streams. This call replaces any existing stream configuration with |
| * the streams defined in the stream_list. This method will be called at |
| * least once after initialize() before a request is submitted with |
| * process_capture_request(). |
| * |
| * The stream_list must contain at least one output-capable stream, and may |
| * not contain more than one input-capable stream. |
| * |
| * The stream_list may contain streams that are also in the currently-active |
| * set of streams (from the previous call to configure_stream()). These |
| * streams will already have valid values for usage, max_buffers, and the |
| * private pointer. |
| * |
| * If such a stream has already had its buffers registered, |
| * register_stream_buffers() will not be called again for the stream, and |
| * buffers from the stream can be immediately included in input requests. |
| * |
| * If the HAL needs to change the stream configuration for an existing |
| * stream due to the new configuration, it may rewrite the values of usage |
| * and/or max_buffers during the configure call. |
| * |
| * The framework will detect such a change, and will then reallocate the |
| * stream buffers, and call register_stream_buffers() again before using |
| * buffers from that stream in a request. |
| * |
| * If a currently-active stream is not included in stream_list, the HAL may |
| * safely remove any references to that stream. It will not be reused in a |
| * later configure() call by the framework, and all the gralloc buffers for |
| * it will be freed after the configure_streams() call returns. |
| * |
| * The stream_list structure is owned by the framework, and may not be |
| * accessed once this call completes. The address of an individual |
| * camera3_stream_t structure will remain valid for access by the HAL until |
| * the end of the first configure_stream() call which no longer includes |
| * that camera3_stream_t in the stream_list argument. The HAL may not change |
| * values in the stream structure outside of the private pointer, except for |
| * the usage and max_buffers members during the configure_streams() call |
| * itself. |
| * |
| * If the stream is new, max_buffer, and private pointer fields of the |
| * stream structure will all be set to 0. The usage will be set to the |
| * consumer usage flags. The HAL device must set these fields before the |
| * configure_streams() call returns. These fields are then used by the |
| * framework and the platform gralloc module to allocate the gralloc |
| * buffers for each stream. |
| * |
| * Before such a new stream can have its buffers included in a capture |
| * request, the framework will call register_stream_buffers() with that |
| * stream. However, the framework is not required to register buffers for |
| * _all_ streams before submitting a request. This allows for quick startup |
| * of (for example) a preview stream, with allocation for other streams |
| * happening later or concurrently. |
| * |
| * ------------------------------------------------------------------------ |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * Reset the HAL camera device processing pipeline and set up new input and |
| * output streams. This call replaces any existing stream configuration with |
| * the streams defined in the stream_list. This method will be called at |
| * least once after initialize() before a request is submitted with |
| * process_capture_request(). |
| * |
| * The stream_list must contain at least one output-capable stream, and may |
| * not contain more than one input-capable stream. |
| * |
| * The stream_list may contain streams that are also in the currently-active |
| * set of streams (from the previous call to configure_stream()). These |
| * streams will already have valid values for usage, max_buffers, and the |
| * private pointer. |
| * |
| * If the HAL needs to change the stream configuration for an existing |
| * stream due to the new configuration, it may rewrite the values of usage |
| * and/or max_buffers during the configure call. |
| * |
| * The framework will detect such a change, and may then reallocate the |
| * stream buffers before using buffers from that stream in a request. |
| * |
| * If a currently-active stream is not included in stream_list, the HAL may |
| * safely remove any references to that stream. It will not be reused in a |
| * later configure() call by the framework, and all the gralloc buffers for |
| * it will be freed after the configure_streams() call returns. |
| * |
| * The stream_list structure is owned by the framework, and may not be |
| * accessed once this call completes. The address of an individual |
| * camera3_stream_t structure will remain valid for access by the HAL until |
| * the end of the first configure_stream() call which no longer includes |
| * that camera3_stream_t in the stream_list argument. The HAL may not change |
| * values in the stream structure outside of the private pointer, except for |
| * the usage and max_buffers members during the configure_streams() call |
| * itself. |
| * |
| * If the stream is new, max_buffer, and private pointer fields of the |
| * stream structure will all be set to 0. The usage will be set to the |
| * consumer usage flags. The HAL device must set these fields before the |
| * configure_streams() call returns. These fields are then used by the |
| * framework and the platform gralloc module to allocate the gralloc |
| * buffers for each stream. |
| * |
| * Newly allocated buffers may be included in a capture request at any time |
| * by the framework. Once a gralloc buffer is returned to the framework |
| * with process_capture_result (and its respective release_fence has been |
| * signaled) the framework may free or reuse it at any time. |
| * |
| * ------------------------------------------------------------------------ |
| * |
| * Preconditions: |
| * |
| * The framework will only call this method when no captures are being |
| * processed. That is, all results have been returned to the framework, and |
| * all in-flight input and output buffers have been returned and their |
| * release sync fences have been signaled by the HAL. The framework will not |
| * submit new requests for capture while the configure_streams() call is |
| * underway. |
| * |
| * Postconditions: |
| * |
| * The HAL device must configure itself to provide maximum possible output |
| * frame rate given the sizes and formats of the output streams, as |
| * documented in the camera device's static metadata. |
| * |
| * Performance requirements: |
| * |
| * This call is expected to be heavyweight and possibly take several hundred |
| * milliseconds to complete, since it may require resetting and |
| * reconfiguring the image sensor and the camera processing pipeline. |
| * Nevertheless, the HAL device should attempt to minimize the |
| * reconfiguration delay to minimize the user-visible pauses during |
| * application operational mode changes (such as switching from still |
| * capture to video recording). |
| * |
| * The HAL should return from this call in 500ms, and must return from this |
| * call in 1000ms. |
| * |
| * Return values: |
| * |
| * 0: On successful stream configuration |
| * |
| * -EINVAL: If the requested stream configuration is invalid. Some examples |
| * of invalid stream configurations include: |
| * |
| * - Including more than 1 input-capable stream (INPUT or |
| * BIDIRECTIONAL) |
| * |
| * - Not including any output-capable streams (OUTPUT or |
| * BIDIRECTIONAL) |
| * |
| * - Including streams with unsupported formats, or an unsupported |
| * size for that format. |
| * |
| * - Including too many output streams of a certain format. |
| * |
| * - Unsupported rotation configuration (only applies to |
| * devices with version >= CAMERA_DEVICE_API_VERSION_3_3) |
| * |
| * - Stream sizes/formats don't satisfy the |
| * camera3_stream_configuration_t->operation_mode requirements for non-NORMAL mode, |
| * or the requested operation_mode is not supported by the HAL. |
| * (only applies to devices with version >= CAMERA_DEVICE_API_VERSION_3_3) |
| * |
| * Note that the framework submitting an invalid stream |
| * configuration is not normal operation, since stream |
| * configurations are checked before configure. An invalid |
| * configuration means that a bug exists in the framework code, or |
| * there is a mismatch between the HAL's static metadata and the |
| * requirements on streams. |
| * |
| * -ENODEV: If there has been a fatal error and the device is no longer |
| * operational. Only close() can be called successfully by the |
| * framework after this error is returned. |
| */ |
| int (*configure_streams)(const struct camera3_device *, |
| camera3_stream_configuration_t *stream_list); |
| |
| /** |
| * register_stream_buffers: |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * DEPRECATED. This will not be called and must be set to NULL. |
| * |
| * <= CAMERA_DEVICE_API_VERSION_3_1: |
| * |
| * Register buffers for a given stream with the HAL device. This method is |
| * called by the framework after a new stream is defined by |
| * configure_streams, and before buffers from that stream are included in a |
| * capture request. If the same stream is listed in a subsequent |
| * configure_streams() call, register_stream_buffers will _not_ be called |
| * again for that stream. |
| * |
| * The framework does not need to register buffers for all configured |
| * streams before it submits the first capture request. This allows quick |
| * startup for preview (or similar use cases) while other streams are still |
| * being allocated. |
| * |
| * This method is intended to allow the HAL device to map or otherwise |
| * prepare the buffers for later use. The buffers passed in will already be |
| * locked for use. At the end of the call, all the buffers must be ready to |
| * be returned to the stream. The buffer_set argument is only valid for the |
| * duration of this call. |
| * |
| * If the stream format was set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED, |
| * the camera HAL should inspect the passed-in buffers here to determine any |
| * platform-private pixel format information. |
| * |
| * Performance requirements: |
| * |
| * This should be a non-blocking call. The HAL should return from this call |
| * in 1ms, and must return from this call in 5ms. |
| * |
| * Return values: |
| * |
| * 0: On successful registration of the new stream buffers |
| * |
| * -EINVAL: If the stream_buffer_set does not refer to a valid active |
| * stream, or if the buffers array is invalid. |
| * |
| * -ENOMEM: If there was a failure in registering the buffers. The framework |
| * must consider all the stream buffers to be unregistered, and can |
| * try to register again later. |
| * |
| * -ENODEV: If there is a fatal error, and the device is no longer |
| * operational. Only close() can be called successfully by the |
| * framework after this error is returned. |
| */ |
| int (*register_stream_buffers)(const struct camera3_device *, |
| const camera3_stream_buffer_set_t *buffer_set); |
| |
| /********************************************************************** |
| * Request creation and submission |
| */ |
| |
| /** |
| * construct_default_request_settings: |
| * |
| * Create capture settings for standard camera use cases. |
| * |
| * The device must return a settings buffer that is configured to meet the |
| * requested use case, which must be one of the CAMERA3_TEMPLATE_* |
| * enums. All request control fields must be included. |
| * |
| * The HAL retains ownership of this structure, but the pointer to the |
| * structure must be valid until the device is closed. The framework and the |
| * HAL may not modify the buffer once it is returned by this call. The same |
| * buffer may be returned for subsequent calls for the same template, or for |
| * other templates. |
| * |
| * Performance requirements: |
| * |
| * This should be a non-blocking call. The HAL should return from this call |
| * in 1ms, and must return from this call in 5ms. |
| * |
| * Return values: |
| * |
| * Valid metadata: On successful creation of a default settings |
| * buffer. |
| * |
| * NULL: In case of a fatal error. After this is returned, only |
| * the close() method can be called successfully by the |
| * framework. |
| */ |
| const camera_metadata_t* (*construct_default_request_settings)( |
| const struct camera3_device *, |
| int type); |
| |
| /** |
| * process_capture_request: |
| * |
| * Send a new capture request to the HAL. The HAL should not return from |
| * this call until it is ready to accept the next request to process. Only |
| * one call to process_capture_request() will be made at a time by the |
| * framework, and the calls will all be from the same thread. The next call |
| * to process_capture_request() will be made as soon as a new request and |
| * its associated buffers are available. In a normal preview scenario, this |
| * means the function will be called again by the framework almost |
| * instantly. |
| * |
| * The actual request processing is asynchronous, with the results of |
| * capture being returned by the HAL through the process_capture_result() |
| * call. This call requires the result metadata to be available, but output |
| * buffers may simply provide sync fences to wait on. Multiple requests are |
| * expected to be in flight at once, to maintain full output frame rate. |
| * |
| * The framework retains ownership of the request structure. It is only |
| * guaranteed to be valid during this call. The HAL device must make copies |
| * of the information it needs to retain for the capture processing. The HAL |
| * is responsible for waiting on and closing the buffers' fences and |
| * returning the buffer handles to the framework. |
| * |
| * The HAL must write the file descriptor for the input buffer's release |
| * sync fence into input_buffer->release_fence, if input_buffer is not |
| * NULL. If the HAL returns -1 for the input buffer release sync fence, the |
| * framework is free to immediately reuse the input buffer. Otherwise, the |
| * framework will wait on the sync fence before refilling and reusing the |
| * input buffer. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * |
| * The input/output buffers provided by the framework in each request |
| * may be brand new (having never before seen by the HAL). |
| * |
| * ------------------------------------------------------------------------ |
| * Performance considerations: |
| * |
| * Handling a new buffer should be extremely lightweight and there should be |
| * no frame rate degradation or frame jitter introduced. |
| * |
| * This call must return fast enough to ensure that the requested frame |
| * rate can be sustained, especially for streaming cases (post-processing |
| * quality settings set to FAST). The HAL should return this call in 1 |
| * frame interval, and must return from this call in 4 frame intervals. |
| * |
| * Return values: |
| * |
| * 0: On a successful start to processing the capture request |
| * |
| * -EINVAL: If the input is malformed (the settings are NULL when not |
| * allowed, invalid physical camera settings, |
| * there are 0 output buffers, etc) and capture processing |
| * cannot start. Failures during request processing should be |
| * handled by calling camera3_callback_ops_t.notify(). In case of |
| * this error, the framework will retain responsibility for the |
| * stream buffers' fences and the buffer handles; the HAL should |
| * not close the fences or return these buffers with |
| * process_capture_result. |
| * |
| * -ENODEV: If the camera device has encountered a serious error. After this |
| * error is returned, only the close() method can be successfully |
| * called by the framework. |
| * |
| */ |
| int (*process_capture_request)(const struct camera3_device *, |
| camera3_capture_request_t *request); |
| |
| /********************************************************************** |
| * Miscellaneous methods |
| */ |
| |
| /** |
| * get_metadata_vendor_tag_ops: |
| * |
| * Get methods to query for vendor extension metadata tag information. The |
| * HAL should fill in all the vendor tag operation methods, or leave ops |
| * unchanged if no vendor tags are defined. |
| * |
| * The definition of vendor_tag_query_ops_t can be found in |
| * system/media/camera/include/system/camera_metadata.h. |
| * |
| * >= CAMERA_DEVICE_API_VERSION_3_2: |
| * DEPRECATED. This function has been deprecated and should be set to |
| * NULL by the HAL. Please implement get_vendor_tag_ops in camera_common.h |
| * instead. |
| */ |
| void (*get_metadata_vendor_tag_ops)(const struct camera3_device*, |
| vendor_tag_query_ops_t* ops); |
| |
| /** |
| * dump: |
| * |
| * Print out debugging state for the camera device. This will be called by |
| * the framework when the camera service is asked for a debug dump, which |
| * happens when using the dumpsys tool, or when capturing a bugreport. |
| * |
| * The passed-in file descriptor can be used to write debugging text using |
| * dprintf() or write(). The text should be in ASCII encoding only. |
| * |
| * Performance requirements: |
| * |
| * This must be a non-blocking call. The HAL should return from this call |
| * in 1ms, must return from this call in 10ms. This call must avoid |
| * deadlocks, as it may be called at any point during camera operation. |
| * Any synchronization primitives used (such as mutex locks or semaphores) |
| * should be acquired with a timeout. |
| */ |
| void (*dump)(const struct camera3_device *, int fd); |
| |
| /** |
| * flush: |
| * |
| * Flush all currently in-process captures and all buffers in the pipeline |
| * on the given device. The framework will use this to dump all state as |
| * quickly as possible in order to prepare for a configure_streams() call. |
| * |
| * No buffers are required to be successfully returned, so every buffer |
| * held at the time of flush() (whether successfully filled or not) may be |
| * returned with CAMERA3_BUFFER_STATUS_ERROR. Note the HAL is still allowed |
| * to return valid (CAMERA3_BUFFER_STATUS_OK) buffers during this call, |
| * provided they are successfully filled. |
| * |
| * All requests currently in the HAL are expected to be returned as soon as |
| * possible. Not-in-process requests should return errors immediately. Any |
| * interruptible hardware blocks should be stopped, and any uninterruptible |
| * blocks should be waited on. |
| * |
| * flush() may be called concurrently to process_capture_request(), with the expectation that |
| * process_capture_request will return quickly and the request submitted in that |
| * process_capture_request call is treated like all other in-flight requests. Due to |
| * concurrency issues, it is possible that from the HAL's point of view, a |
| * process_capture_request() call may be started after flush has been invoked but has not |
| * returned yet. If such a call happens before flush() returns, the HAL should treat the new |
| * capture request like other in-flight pending requests (see #4 below). |
| * |
| * More specifically, the HAL must follow below requirements for various cases: |
| * |
| * 1. For captures that are too late for the HAL to cancel/stop, and will be |
| * completed normally by the HAL; i.e. the HAL can send shutter/notify and |
| * process_capture_result and buffers as normal. |
| * |
| * 2. For pending requests that have not done any processing, the HAL must call notify |
| * CAMERA3_MSG_ERROR_REQUEST, and return all the output buffers with |
| * process_capture_result in the error state (CAMERA3_BUFFER_STATUS_ERROR). |
| * The HAL must not place the release fence into an error state, instead, |
| * the release fences must be set to the acquire fences passed by the framework, |
| * or -1 if they have been waited on by the HAL already. This is also the path |
| * to follow for any captures for which the HAL already called notify() with |
| * CAMERA3_MSG_SHUTTER but won't be producing any metadata/valid buffers for. |
| * After CAMERA3_MSG_ERROR_REQUEST, for a given frame, only process_capture_results with |
| * buffers in CAMERA3_BUFFER_STATUS_ERROR are allowed. No further notifys or |
| * process_capture_result with non-null metadata is allowed. |
| * |
| * 3. For partially completed pending requests that will not have all the output |
| * buffers or perhaps missing metadata, the HAL should follow below: |
| * |
| * 3.1. Call notify with CAMERA3_MSG_ERROR_RESULT if some of the expected result |
| * metadata (i.e. one or more partial metadata) won't be available for the capture. |
| * |
| * 3.2. Call notify with CAMERA3_MSG_ERROR_BUFFER for every buffer that won't |
| * be produced for the capture. |
| * |
| * 3.3 Call notify with CAMERA3_MSG_SHUTTER with the capture timestamp before |
| * any buffers/metadata are returned with process_capture_result. |
| * |
| * 3.4 For captures that will produce some results, the HAL must not call |
| * CAMERA3_MSG_ERROR_REQUEST, since that indicates complete failure. |
| * |
| * 3.5. Valid buffers/metadata should be passed to the framework as normal. |
| * |
| * 3.6. Failed buffers should be returned to the framework as described for case 2. |
| * But failed buffers do not have to follow the strict ordering valid buffers do, |
| * and may be out-of-order with respect to valid buffers. For example, if buffers |
| * A, B, C, D, E are sent, D and E are failed, then A, E, B, D, C is an acceptable |
| * return order. |
| * |
| * 3.7. For fully-missing metadata, calling CAMERA3_MSG_ERROR_RESULT is sufficient, no |
| * need to call process_capture_result with NULL metadata or equivalent. |
| * |
| * 4. If a flush() is invoked while a process_capture_request() invocation is active, that |
| * process call should return as soon as possible. In addition, if a process_capture_request() |
| * call is made after flush() has been invoked but before flush() has returned, the |
| * capture request provided by the late process_capture_request call should be treated like |
| * a pending request in case #2 above. |
| * |
| * flush() should only return when there are no more outstanding buffers or |
| * requests left in the HAL. The framework may call configure_streams (as |
| * the HAL state is now quiesced) or may issue new requests. |
| * |
| * Note that it's sufficient to only support fully-succeeded and fully-failed result cases. |
| * However, it is highly desirable to support the partial failure cases as well, as it |
| * could help improve the flush call overall performance. |
| * |
| * Performance requirements: |
| * |
| * The HAL should return from this call in 100ms, and must return from this |
| * call in 1000ms. And this call must not be blocked longer than pipeline |
| * latency (see S7 for definition). |
| * |
| * Version information: |
| * |
| * only available if device version >= CAMERA_DEVICE_API_VERSION_3_1. |
| * |
| * Return values: |
| * |
| * 0: On a successful flush of the camera HAL. |
| * |
| * -EINVAL: If the input is malformed (the device is not valid). |
| * |
| * -ENODEV: If the camera device has encountered a serious error. After this |
| * error is returned, only the close() method can be successfully |
| * called by the framework. |
| */ |
| int (*flush)(const struct camera3_device *); |
| |
| /** |
| * signal_stream_flush: |
| * |
| * <= CAMERA_DEVICE_API_VERISON_3_5: |
| * |
| * Not defined and must be NULL |
| * |
| * >= CAMERA_DEVICE_API_VERISON_3_6: |
| * |
| * Signaling HAL camera service is about to perform configure_streams() call |
| * and HAL must return all buffers of designated streams. HAL must finish |
| * inflight requests normally and return all buffers belonging to the |
| * designated streams through process_capture_result() or |
| * return_stream_buffers() API in a timely manner, or camera service will run |
| * into a fatal error. |
| * |
| * Note that this call serves as an optional hint and camera service may |
| * skip calling this if all buffers are already returned. |
| * |
| */ |
| void (*signal_stream_flush)(const struct camera3_device*, |
| uint32_t num_streams, |
| const camera3_stream_t* const* streams); |
| |
| /** |
| * is_reconfiguration_required: |
| * |
| * <= CAMERA_DEVICE_API_VERISON_3_5: |
| * |
| * Not defined and must be NULL |
| * |
| * >= CAMERA_DEVICE_API_VERISON_3_6: |
| * |
| * Check whether complete stream reconfiguration is required for possible new session |
| * parameter values. |
| * |
| * This method must be called by the camera framework in case the client changes |
| * the value of any advertised session parameters. Depending on the specific values |
| * the HAL can decide whether a complete stream reconfiguration is required. In case |
| * the HAL returns -ENVAL, the camera framework must skip the internal reconfiguration. |
| * In case Hal returns 0, the framework must reconfigure the streams and pass the |
| * new session parameter values accordingly. |
| * This call may be done by the framework some time before the request with new parameters |
| * is submitted to the HAL, and the request may be cancelled before it ever gets submitted. |
| * Therefore, the HAL must not use this query as an indication to change its behavior in any |
| * way. |
| * ------------------------------------------------------------------------ |
| * |
| * Preconditions: |
| * |
| * The framework can call this method at any time after active |
| * session configuration. There must be no impact on the performance of |
| * pending camera requests in any way. In particular there must not be |
| * any glitches or delays during normal camera streaming. |
| * |
| * Performance requirements: |
| * HW and SW camera settings must not be changed and there must not be |
| * a user-visible impact on camera performance. |
| * |
| * @param oldSessionParams The currently applied session parameters. |
| * @param newSessionParams The new session parameters set by client. |
| * |
| * @return Status Status code for the operation, one of: |
| * 0: In case the stream reconfiguration is required |
| * |
| * -EINVAL: In case the stream reconfiguration is not required. |
| * |
| * -ENOSYS: In case the camera device does not support the |
| * reconfiguration query. |
| */ |
| int (*is_reconfiguration_required)(const struct camera3_device*, |
| const camera_metadata_t* old_session_params, |
| const camera_metadata_t* new_session_params); |
| |
| /* reserved for future use */ |
| void *reserved[6]; |
| } camera3_device_ops_t; |
| |
| /********************************************************************** |
| * |
| * Camera device definition |
| * |
| */ |
| typedef struct camera3_device { |
| /** |
| * common.version must equal CAMERA_DEVICE_API_VERSION_3_0 to identify this |
| * device as implementing version 3.0 of the camera device HAL. |
| * |
| * Performance requirements: |
| * |
| * Camera open (common.module->common.methods->open) should return in 200ms, and must return |
| * in 500ms. |
| * Camera close (common.close) should return in 200ms, and must return in 500ms. |
| * |
| */ |
| hw_device_t common; |
| camera3_device_ops_t *ops; |
| void *priv; |
| } camera3_device_t; |
| |
| __END_DECLS |
| |
| #endif /* #ifdef ANDROID_INCLUDE_CAMERA3_H */ |