| #!/bin/bash |
| # |
| # Copyright (C) 2016 The CyanogenMod Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| PRODUCT_COPY_FILES_LIST=() |
| PRODUCT_COPY_FILES_HASHES=() |
| PRODUCT_PACKAGES_LIST=() |
| PRODUCT_PACKAGES_HASHES=() |
| PACKAGE_LIST=() |
| VENDOR_STATE=-1 |
| VENDOR_RADIO_STATE=-1 |
| COMMON=-1 |
| ARCHES= |
| FULLY_DEODEXED=-1 |
| |
| TMPDIR=$(mktemp -d) |
| |
| # |
| # cleanup |
| # |
| # kill our tmpfiles with fire on exit |
| # |
| function cleanup() { |
| rm -rf "${TMPDIR:?}" |
| } |
| |
| trap cleanup 0 |
| |
| # |
| # setup_vendor |
| # |
| # $1: device name |
| # $2: vendor name |
| # $3: Lineage root directory |
| # $4: is common device - optional, default to false |
| # $5: cleanup - optional, default to true |
| # $6: custom vendor makefile name - optional, default to false |
| # |
| # Must be called before any other functions can be used. This |
| # sets up the internal state for a new vendor configuration. |
| # |
| function setup_vendor() { |
| local DEVICE="$1" |
| if [ -z "$DEVICE" ]; then |
| echo "\$DEVICE must be set before including this script!" |
| exit 1 |
| fi |
| |
| export VENDOR="$2" |
| if [ -z "$VENDOR" ]; then |
| echo "\$VENDOR must be set before including this script!" |
| exit 1 |
| fi |
| |
| export LINEAGE_ROOT="$3" |
| if [ ! -d "$LINEAGE_ROOT" ]; then |
| echo "\$LINEAGE_ROOT must be set and valid before including this script!" |
| exit 1 |
| fi |
| |
| export OUTDIR=vendor/"$VENDOR"/"$DEVICE" |
| if [ ! -d "$LINEAGE_ROOT/$OUTDIR" ]; then |
| mkdir -p "$LINEAGE_ROOT/$OUTDIR" |
| fi |
| |
| VNDNAME="$6" |
| if [ -z "$VNDNAME" ]; then |
| VNDNAME="$DEVICE" |
| fi |
| |
| export PRODUCTMK="$LINEAGE_ROOT"/"$OUTDIR"/"$VNDNAME"-vendor.mk |
| export ANDROIDMK="$LINEAGE_ROOT"/"$OUTDIR"/Android.mk |
| export BOARDMK="$LINEAGE_ROOT"/"$OUTDIR"/BoardConfigVendor.mk |
| |
| if [ "$4" == "true" ] || [ "$4" == "1" ]; then |
| COMMON=1 |
| else |
| COMMON=0 |
| fi |
| |
| if [ "$5" == "false" ] || [ "$5" == "0" ]; then |
| VENDOR_STATE=1 |
| VENDOR_RADIO_STATE=1 |
| else |
| VENDOR_STATE=0 |
| VENDOR_RADIO_STATE=0 |
| fi |
| } |
| |
| # Helper functions for parsing a spec. |
| # notes: an optional "|SHA1" that may appear in the format is stripped |
| # early from the spec in the parse_file_list function, and |
| # should not be present inside the input parameter passed |
| # to these functions. |
| |
| # |
| # input: spec in the form of "src[:dst][;args]" |
| # output: "src" |
| # |
| function src_file() { |
| local SPEC="$1" |
| local SPLIT=(${SPEC//:/ }) |
| local ARGS="$(target_args ${SPEC})" |
| # Regardless of there being a ":" delimiter or not in the spec, |
| # the source file is always either the first, or the only entry. |
| local SRC="${SPLIT[0]}" |
| # Remove target_args suffix, if present |
| echo "${SRC%;${ARGS}}" |
| } |
| |
| # |
| # input: spec in the form of "src[:dst][;args]" |
| # output: "dst" if present, "src" otherwise. |
| # |
| function target_file() { |
| local SPEC="$1" |
| local SPLIT=(${SPEC//:/ }) |
| local ARGS="$(target_args ${SPEC})" |
| local DST= |
| case ${#SPLIT[@]} in |
| 1) |
| # The spec doesn't have a : delimiter |
| DST="${SPLIT[0]}" |
| ;; |
| *) |
| # The spec actually has a src:dst format |
| DST="${SPLIT[1]}" |
| ;; |
| esac |
| # Remove target_args suffix, if present |
| echo "${DST%;${ARGS}}" |
| } |
| |
| # |
| # input: spec in the form of "src[:dst][;args]" |
| # output: "args" if present, "" otherwise. |
| # |
| function target_args() { |
| local SPEC="$1" |
| local SPLIT=(${SPEC//;/ }) |
| local ARGS= |
| case ${#SPLIT[@]} in |
| 1) |
| # No ";" delimiter in the spec. |
| ;; |
| *) |
| # The "args" are whatever comes after the ";" character. |
| # Basically the spec stripped of whatever is to the left of ";". |
| ARGS="${SPEC#${SPLIT[0]};}" |
| ;; |
| esac |
| echo "${ARGS}" |
| } |
| |
| # |
| # prefix_match: |
| # |
| # input: |
| # - $1: prefix |
| # - (global variable) PRODUCT_PACKAGES_LIST: array of [src:]dst[;args] specs. |
| # output: |
| # - new array consisting of dst[;args] entries where $1 is a prefix of ${dst}. |
| # |
| function prefix_match() { |
| local PREFIX="$1" |
| for LINE in "${PRODUCT_PACKAGES_LIST[@]}"; do |
| local FILE=$(target_file "$LINE") |
| if [[ "$FILE" =~ ^"$PREFIX" ]]; then |
| local ARGS=$(target_args "$LINE") |
| if [ -z "${ARGS}" ]; then |
| echo "${FILE#$PREFIX}" |
| else |
| echo "${FILE#$PREFIX};${ARGS}" |
| fi |
| fi |
| done |
| } |
| |
| # |
| # prefix_match_file: |
| # |
| # $1: the prefix to match on |
| # $2: the file to match the prefix for |
| # |
| # Internal function which returns true if a filename contains the |
| # specified prefix. |
| # |
| function prefix_match_file() { |
| local PREFIX="$1" |
| local FILE="$2" |
| if [[ "$FILE" =~ ^"$PREFIX" ]]; then |
| return 0 |
| else |
| return 1 |
| fi |
| } |
| |
| # |
| # truncate_file |
| # |
| # $1: the filename to truncate |
| # $2: the argument to output the truncated filename to |
| # |
| # Internal function which truncates a filename by removing the first dir |
| # in the path. ex. vendor/lib/libsdmextension.so -> lib/libsdmextension.so |
| # |
| function truncate_file() { |
| local FILE="$1" |
| RETURN_FILE="$2" |
| local FIND="${FILE%%/*}" |
| local LOCATION="${#FIND}+1" |
| echo ${FILE:$LOCATION} |
| } |
| |
| # |
| # write_product_copy_files: |
| # |
| # $1: make treble compatible makefile - optional, default to false |
| # |
| # Creates the PRODUCT_COPY_FILES section in the product makefile for all |
| # items in the list which do not start with a dash (-). |
| # |
| function write_product_copy_files() { |
| local COUNT=${#PRODUCT_COPY_FILES_LIST[@]} |
| local TARGET= |
| local FILE= |
| local LINEEND= |
| local TREBLE_COMPAT=$1 |
| |
| if [ "$COUNT" -eq "0" ]; then |
| return 0 |
| fi |
| |
| printf '%s\n' "PRODUCT_COPY_FILES += \\" >> "$PRODUCTMK" |
| for (( i=1; i<COUNT+1; i++ )); do |
| FILE="${PRODUCT_COPY_FILES_LIST[$i-1]}" |
| LINEEND=" \\" |
| if [ "$i" -eq "$COUNT" ]; then |
| LINEEND="" |
| fi |
| |
| TARGET=$(target_file "$FILE") |
| if [ "$TREBLE_COMPAT" == "true" ] || [ "$TREBLE_COMPAT" == "1" ]; then |
| if prefix_match_file "vendor/" $TARGET ; then |
| local OUTTARGET=$(truncate_file $TARGET) |
| printf ' %s/proprietary/%s:$(TARGET_COPY_OUT_VENDOR)/%s%s\n' \ |
| "$OUTDIR" "$TARGET" "$OUTTARGET" "$LINEEND" >> "$PRODUCTMK" |
| else |
| printf ' %s/proprietary/%s:system/%s%s\n' \ |
| "$OUTDIR" "$TARGET" "$TARGET" "$LINEEND" >> "$PRODUCTMK" |
| fi |
| else |
| printf ' %s/proprietary/%s:system/%s%s\n' \ |
| "$OUTDIR" "$TARGET" "$TARGET" "$LINEEND" >> "$PRODUCTMK" |
| fi |
| done |
| return 0 |
| } |
| |
| # |
| # write_packages: |
| # |
| # $1: The LOCAL_MODULE_CLASS for the given module list |
| # $2: "true" if this package is part of the vendor/ path |
| # $3: type-specific extra flags |
| # $4: Name of the array holding the target list |
| # |
| # Internal function which writes out the BUILD_PREBUILT stanzas |
| # for all modules in the list. This is called by write_product_packages |
| # after the modules are categorized. |
| # |
| function write_packages() { |
| |
| local CLASS="$1" |
| local VENDOR_PKG="$2" |
| local EXTRA="$3" |
| |
| # Yes, this is a horrible hack - we create a new array using indirection |
| local ARR_NAME="$4[@]" |
| local FILELIST=("${!ARR_NAME}") |
| |
| local FILE= |
| local ARGS= |
| local BASENAME= |
| local EXTENSION= |
| local PKGNAME= |
| local SRC= |
| |
| for P in "${FILELIST[@]}"; do |
| FILE=$(target_file "$P") |
| ARGS=$(target_args "$P") |
| |
| BASENAME=$(basename "$FILE") |
| DIRNAME=$(dirname "$FILE") |
| EXTENSION=${BASENAME##*.} |
| PKGNAME=${BASENAME%.*} |
| |
| # Add to final package list |
| PACKAGE_LIST+=("$PKGNAME") |
| |
| SRC="proprietary" |
| if [ "$VENDOR_PKG" = "true" ]; then |
| SRC+="/vendor" |
| fi |
| |
| printf 'include $(CLEAR_VARS)\n' |
| printf 'LOCAL_MODULE := %s\n' "$PKGNAME" |
| printf 'LOCAL_MODULE_OWNER := %s\n' "$VENDOR" |
| if [ "$CLASS" = "SHARED_LIBRARIES" ]; then |
| if [ "$EXTRA" = "both" ]; then |
| printf 'LOCAL_SRC_FILES_64 := %s/lib64/%s\n' "$SRC" "$FILE" |
| printf 'LOCAL_SRC_FILES_32 := %s/lib/%s\n' "$SRC" "$FILE" |
| #if [ "$VENDOR_PKG" = "true" ]; then |
| # echo "LOCAL_MODULE_PATH_64 := \$(TARGET_OUT_VENDOR_SHARED_LIBRARIES)" |
| # echo "LOCAL_MODULE_PATH_32 := \$(2ND_TARGET_OUT_VENDOR_SHARED_LIBRARIES)" |
| #else |
| # echo "LOCAL_MODULE_PATH_64 := \$(TARGET_OUT_SHARED_LIBRARIES)" |
| # echo "LOCAL_MODULE_PATH_32 := \$(2ND_TARGET_OUT_SHARED_LIBRARIES)" |
| #fi |
| elif [ "$EXTRA" = "64" ]; then |
| printf 'LOCAL_SRC_FILES := %s/lib64/%s\n' "$SRC" "$FILE" |
| else |
| printf 'LOCAL_SRC_FILES := %s/lib/%s\n' "$SRC" "$FILE" |
| fi |
| if [ "$EXTRA" != "none" ]; then |
| printf 'LOCAL_MULTILIB := %s\n' "$EXTRA" |
| fi |
| elif [ "$CLASS" = "APPS" ]; then |
| if [ "$EXTRA" = "priv-app" ]; then |
| SRC="$SRC/priv-app" |
| else |
| SRC="$SRC/app" |
| fi |
| printf 'LOCAL_SRC_FILES := %s/%s\n' "$SRC" "$FILE" |
| local CERT=platform |
| if [ ! -z "$ARGS" ]; then |
| CERT="$ARGS" |
| fi |
| printf 'LOCAL_CERTIFICATE := %s\n' "$CERT" |
| elif [ "$CLASS" = "JAVA_LIBRARIES" ]; then |
| printf 'LOCAL_SRC_FILES := %s/framework/%s\n' "$SRC" "$FILE" |
| local CERT=platform |
| if [ ! -z "$ARGS" ]; then |
| CERT="$ARGS" |
| fi |
| printf 'LOCAL_CERTIFICATE := %s\n' "$CERT" |
| elif [ "$CLASS" = "ETC" ]; then |
| printf 'LOCAL_SRC_FILES := %s/etc/%s\n' "$SRC" "$FILE" |
| elif [ "$CLASS" = "EXECUTABLES" ]; then |
| if [ "$ARGS" = "rootfs" ]; then |
| SRC="$SRC/rootfs" |
| if [ "$EXTRA" = "sbin" ]; then |
| SRC="$SRC/sbin" |
| printf '%s\n' "LOCAL_MODULE_PATH := \$(TARGET_ROOT_OUT_SBIN)" |
| printf '%s\n' "LOCAL_UNSTRIPPED_PATH := \$(TARGET_ROOT_OUT_SBIN_UNSTRIPPED)" |
| fi |
| else |
| SRC="$SRC/bin" |
| fi |
| printf 'LOCAL_SRC_FILES := %s/%s\n' "$SRC" "$FILE" |
| unset EXTENSION |
| else |
| printf 'LOCAL_SRC_FILES := %s/%s\n' "$SRC" "$FILE" |
| fi |
| printf 'LOCAL_MODULE_TAGS := optional\n' |
| printf 'LOCAL_MODULE_CLASS := %s\n' "$CLASS" |
| if [ "$CLASS" = "APPS" ]; then |
| printf 'LOCAL_DEX_PREOPT := false\n' |
| fi |
| if [ ! -z "$EXTENSION" ]; then |
| printf 'LOCAL_MODULE_SUFFIX := .%s\n' "$EXTENSION" |
| fi |
| if [ "$CLASS" = "SHARED_LIBRARIES" ] || [ "$CLASS" = "EXECUTABLES" ]; then |
| if [ "$DIRNAME" != "." ]; then |
| printf 'LOCAL_MODULE_RELATIVE_PATH := %s\n' "$DIRNAME" |
| fi |
| fi |
| if [ "$EXTRA" = "priv-app" ]; then |
| printf 'LOCAL_PRIVILEGED_MODULE := true\n' |
| fi |
| if [ "$VENDOR_PKG" = "true" ]; then |
| printf 'LOCAL_VENDOR_MODULE := true\n' |
| fi |
| printf 'include $(BUILD_PREBUILT)\n\n' |
| done |
| } |
| |
| # |
| # write_product_packages: |
| # |
| # This function will create BUILD_PREBUILT entries in the |
| # Android.mk and associated PRODUCT_PACKAGES list in the |
| # product makefile for all files in the blob list which |
| # start with a single dash (-) character. |
| # |
| function write_product_packages() { |
| PACKAGE_LIST=() |
| |
| local COUNT=${#PRODUCT_PACKAGES_LIST[@]} |
| |
| if [ "$COUNT" = "0" ]; then |
| return 0 |
| fi |
| |
| # Figure out what's 32-bit, what's 64-bit, and what's multilib |
| # I really should not be doing this in bash due to shitty array passing :( |
| local T_LIB32=( $(prefix_match "lib/") ) |
| local T_LIB64=( $(prefix_match "lib64/") ) |
| local MULTILIBS=( $(comm -12 <(printf '%s\n' "${T_LIB32[@]}") <(printf '%s\n' "${T_LIB64[@]}")) ) |
| local LIB32=( $(comm -23 <(printf '%s\n' "${T_LIB32[@]}") <(printf '%s\n' "${MULTILIBS[@]}")) ) |
| local LIB64=( $(comm -23 <(printf '%s\n' "${T_LIB64[@]}") <(printf '%s\n' "${MULTILIBS[@]}")) ) |
| |
| if [ "${#MULTILIBS[@]}" -gt "0" ]; then |
| write_packages "SHARED_LIBRARIES" "false" "both" "MULTILIBS" >> "$ANDROIDMK" |
| fi |
| if [ "${#LIB32[@]}" -gt "0" ]; then |
| write_packages "SHARED_LIBRARIES" "false" "32" "LIB32" >> "$ANDROIDMK" |
| fi |
| if [ "${#LIB64[@]}" -gt "0" ]; then |
| write_packages "SHARED_LIBRARIES" "false" "64" "LIB64" >> "$ANDROIDMK" |
| fi |
| |
| local T_V_LIB32=( $(prefix_match "vendor/lib/") ) |
| local T_V_LIB64=( $(prefix_match "vendor/lib64/") ) |
| local V_MULTILIBS=( $(comm -12 <(printf '%s\n' "${T_V_LIB32[@]}") <(printf '%s\n' "${T_V_LIB64[@]}")) ) |
| local V_LIB32=( $(comm -23 <(printf '%s\n' "${T_V_LIB32[@]}") <(printf '%s\n' "${V_MULTILIBS[@]}")) ) |
| local V_LIB64=( $(comm -23 <(printf '%s\n' "${T_V_LIB64[@]}") <(printf '%s\n' "${V_MULTILIBS[@]}")) ) |
| |
| if [ "${#V_MULTILIBS[@]}" -gt "0" ]; then |
| write_packages "SHARED_LIBRARIES" "true" "both" "V_MULTILIBS" >> "$ANDROIDMK" |
| fi |
| if [ "${#V_LIB32[@]}" -gt "0" ]; then |
| write_packages "SHARED_LIBRARIES" "true" "32" "V_LIB32" >> "$ANDROIDMK" |
| fi |
| if [ "${#V_LIB64[@]}" -gt "0" ]; then |
| write_packages "SHARED_LIBRARIES" "true" "64" "V_LIB64" >> "$ANDROIDMK" |
| fi |
| |
| # Apps |
| local APPS=( $(prefix_match "app/") ) |
| if [ "${#APPS[@]}" -gt "0" ]; then |
| write_packages "APPS" "false" "" "APPS" >> "$ANDROIDMK" |
| fi |
| local PRIV_APPS=( $(prefix_match "priv-app/") ) |
| if [ "${#PRIV_APPS[@]}" -gt "0" ]; then |
| write_packages "APPS" "false" "priv-app" "PRIV_APPS" >> "$ANDROIDMK" |
| fi |
| local V_APPS=( $(prefix_match "vendor/app/") ) |
| if [ "${#V_APPS[@]}" -gt "0" ]; then |
| write_packages "APPS" "true" "" "V_APPS" >> "$ANDROIDMK" |
| fi |
| local V_PRIV_APPS=( $(prefix_match "vendor/priv-app/") ) |
| if [ "${#V_PRIV_APPS[@]}" -gt "0" ]; then |
| write_packages "APPS" "true" "priv-app" "V_PRIV_APPS" >> "$ANDROIDMK" |
| fi |
| |
| # Framework |
| local FRAMEWORK=( $(prefix_match "framework/") ) |
| if [ "${#FRAMEWORK[@]}" -gt "0" ]; then |
| write_packages "JAVA_LIBRARIES" "false" "" "FRAMEWORK" >> "$ANDROIDMK" |
| fi |
| local V_FRAMEWORK=( $(prefix_match "vendor/framework/") ) |
| if [ "${#V_FRAMEWORK[@]}" -gt "0" ]; then |
| write_packages "JAVA_LIBRARIES" "true" "" "V_FRAMEWORK" >> "$ANDROIDMK" |
| fi |
| |
| # Etc |
| local ETC=( $(prefix_match "etc/") ) |
| if [ "${#ETC[@]}" -gt "0" ]; then |
| write_packages "ETC" "false" "" "ETC" >> "$ANDROIDMK" |
| fi |
| local V_ETC=( $(prefix_match "vendor/etc/") ) |
| if [ "${#V_ETC[@]}" -gt "0" ]; then |
| write_packages "ETC" "true" "" "V_ETC" >> "$ANDROIDMK" |
| fi |
| |
| # Executables |
| local BIN=( $(prefix_match "bin/") ) |
| if [ "${#BIN[@]}" -gt "0" ]; then |
| write_packages "EXECUTABLES" "false" "" "BIN" >> "$ANDROIDMK" |
| fi |
| local V_BIN=( $(prefix_match "vendor/bin/") ) |
| if [ "${#V_BIN[@]}" -gt "0" ]; then |
| write_packages "EXECUTABLES" "true" "" "V_BIN" >> "$ANDROIDMK" |
| fi |
| local SBIN=( $(prefix_match "sbin/") ) |
| if [ "${#SBIN[@]}" -gt "0" ]; then |
| write_packages "EXECUTABLES" "false" "sbin" "SBIN" >> "$ANDROIDMK" |
| fi |
| |
| |
| # Actually write out the final PRODUCT_PACKAGES list |
| local PACKAGE_COUNT=${#PACKAGE_LIST[@]} |
| |
| if [ "$PACKAGE_COUNT" -eq "0" ]; then |
| return 0 |
| fi |
| |
| printf '\n%s\n' "PRODUCT_PACKAGES += \\" >> "$PRODUCTMK" |
| for (( i=1; i<PACKAGE_COUNT+1; i++ )); do |
| local LINEEND=" \\" |
| if [ "$i" -eq "$PACKAGE_COUNT" ]; then |
| LINEEND="" |
| fi |
| printf ' %s%s\n' "${PACKAGE_LIST[$i-1]}" "$LINEEND" >> "$PRODUCTMK" |
| done |
| } |
| |
| # |
| # write_header: |
| # |
| # $1: file which will be written to |
| # |
| # writes out the copyright header with the current year. |
| # note that this is not an append operation, and should |
| # be executed first! |
| # |
| function write_header() { |
| if [ -f $1 ]; then |
| rm $1 |
| fi |
| |
| YEAR=$(date +"%Y") |
| |
| [ "$COMMON" -eq 1 ] && local DEVICE="$DEVICE_COMMON" |
| |
| NUM_REGEX='^[0-9]+$' |
| if [[ $INITIAL_COPYRIGHT_YEAR =~ $NUM_REGEX ]] && [ $INITIAL_COPYRIGHT_YEAR -le $YEAR ]; then |
| if [ $INITIAL_COPYRIGHT_YEAR -lt 2016 ]; then |
| printf "# Copyright (C) $INITIAL_COPYRIGHT_YEAR-2016 The CyanogenMod Project\n" > $1 |
| elif [ $INITIAL_COPYRIGHT_YEAR -eq 2016 ]; then |
| printf "# Copyright (C) 2016 The CyanogenMod Project\n" > $1 |
| fi |
| if [ $YEAR -eq 2017 ]; then |
| printf "# Copyright (C) 2017 The LineageOS Project\n" >> $1 |
| elif [ $INITIAL_COPYRIGHT_YEAR -eq $YEAR ]; then |
| printf "# Copyright (C) $YEAR The LineageOS Project\n" >> $1 |
| elif [ $INITIAL_COPYRIGHT_YEAR -le 2017 ]; then |
| printf "# Copyright (C) 2017-$YEAR The LineageOS Project\n" >> $1 |
| else |
| printf "# Copyright (C) $INITIAL_COPYRIGHT_YEAR-$YEAR The LineageOS Project\n" >> $1 |
| fi |
| else |
| printf "# Copyright (C) $YEAR The LineageOS Project\n" > $1 |
| fi |
| |
| cat << EOF >> $1 |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # This file is generated by device/$VENDOR/$DEVICE/setup-makefiles.sh |
| |
| EOF |
| } |
| |
| # |
| # write_headers: |
| # |
| # $1: devices falling under common to be added to guard - optional |
| # $2: custom guard - optional |
| # |
| # Calls write_header for each of the makefiles and creates |
| # the initial path declaration and device guard for the |
| # Android.mk |
| # |
| function write_headers() { |
| write_header "$ANDROIDMK" |
| |
| GUARD="$2" |
| if [ -z "$GUARD" ]; then |
| GUARD="TARGET_DEVICE" |
| fi |
| |
| cat << EOF >> "$ANDROIDMK" |
| LOCAL_PATH := \$(call my-dir) |
| |
| EOF |
| if [ "$COMMON" -ne 1 ]; then |
| cat << EOF >> "$ANDROIDMK" |
| ifeq (\$($GUARD),$DEVICE) |
| |
| EOF |
| else |
| if [ -z "$1" ]; then |
| echo "Argument with devices to be added to guard must be set!" |
| exit 1 |
| fi |
| cat << EOF >> "$ANDROIDMK" |
| ifneq (\$(filter $1,\$($GUARD)),) |
| |
| EOF |
| fi |
| |
| write_header "$BOARDMK" |
| write_header "$PRODUCTMK" |
| } |
| |
| # |
| # write_footers: |
| # |
| # Closes the inital guard and any other finalization tasks. Must |
| # be called as the final step. |
| # |
| function write_footers() { |
| cat << EOF >> "$ANDROIDMK" |
| endif |
| EOF |
| } |
| |
| # Return success if adb is up and not in recovery |
| function _adb_connected { |
| { |
| if [[ "$(adb get-state)" == device ]] |
| then |
| return 0 |
| fi |
| } 2>/dev/null |
| |
| return 1 |
| }; |
| |
| # |
| # parse_file_list: |
| # |
| # $1: input file |
| # $2: blob section in file - optional |
| # |
| # Sets PRODUCT_PACKAGES and PRODUCT_COPY_FILES while parsing the input file |
| # |
| function parse_file_list() { |
| if [ -z "$1" ]; then |
| echo "An input file is expected!" |
| exit 1 |
| elif [ ! -f "$1" ]; then |
| echo "Input file "$1" does not exist!" |
| exit 1 |
| fi |
| |
| if [ -n "$2" ]; then |
| echo "Using section \"$2\"" |
| LIST=$TMPDIR/files.txt |
| # Match all lines starting with first line found to start* with '#' |
| # comment and contain** $2, and ending with first line to be empty*. |
| # *whitespaces (tabs, spaces) at the beginning of lines are discarded |
| # **the $2 match is case-insensitive |
| cat $1 | sed -n '/^[[:space:]]*#.*'"$2"'/I,/^[[:space:]]*$/ p' > $LIST |
| else |
| LIST=$1 |
| fi |
| |
| |
| PRODUCT_PACKAGES_LIST=() |
| PRODUCT_PACKAGES_HASHES=() |
| PRODUCT_COPY_FILES_LIST=() |
| PRODUCT_COPY_FILES_HASHES=() |
| |
| while read -r line; do |
| if [ -z "$line" ]; then continue; fi |
| |
| # If the line has a pipe delimiter, a sha1 hash should follow. |
| # This indicates the file should be pinned and not overwritten |
| # when extracting files. |
| local SPLIT=(${line//\|/ }) |
| local COUNT=${#SPLIT[@]} |
| local SPEC=${SPLIT[0]} |
| local HASH="x" |
| if [ "$COUNT" -gt "1" ]; then |
| HASH=${SPLIT[1]} |
| fi |
| |
| # if line starts with a dash, it needs to be packaged |
| if [[ "$SPEC" =~ ^- ]]; then |
| PRODUCT_PACKAGES_LIST+=("${SPEC#-}") |
| PRODUCT_PACKAGES_HASHES+=("$HASH") |
| else |
| PRODUCT_COPY_FILES_LIST+=("$SPEC") |
| PRODUCT_COPY_FILES_HASHES+=("$HASH") |
| fi |
| |
| done < <(egrep -v '(^#|^[[:space:]]*$)' "$LIST" | LC_ALL=C sort | uniq) |
| } |
| |
| # |
| # write_makefiles: |
| # |
| # $1: file containing the list of items to extract |
| # $2: make treble compatible makefile - optional |
| # |
| # Calls write_product_copy_files and write_product_packages on |
| # the given file and appends to the Android.mk as well as |
| # the product makefile. |
| # |
| function write_makefiles() { |
| parse_file_list "$1" |
| write_product_copy_files "$2" |
| write_product_packages |
| } |
| |
| # |
| # append_firmware_calls_to_makefiles: |
| # |
| # Appends to Android.mk the calls to all images present in radio folder |
| # (filesmap file used by releasetools to map firmware images should be kept in the device tree) |
| # |
| function append_firmware_calls_to_makefiles() { |
| cat << EOF >> "$ANDROIDMK" |
| ifeq (\$(LOCAL_PATH)/radio, \$(wildcard \$(LOCAL_PATH)/radio)) |
| |
| RADIO_FILES := \$(wildcard \$(LOCAL_PATH)/radio/*) |
| \$(foreach f, \$(notdir \$(RADIO_FILES)), \\ |
| \$(call add-radio-file,radio/\$(f))) |
| \$(call add-radio-file,../../../device/$VENDOR/$DEVICE/radio/filesmap) |
| |
| endif |
| |
| EOF |
| } |
| |
| # |
| # get_file: |
| # |
| # $1: input file |
| # $2: target file/folder |
| # $3: source of the file (can be "adb" or a local folder) |
| # |
| # Silently extracts the input file to defined target |
| # Returns success if file can be pulled from the device or found locally |
| # |
| function get_file() { |
| local SRC="$3" |
| |
| if [ "$SRC" = "adb" ]; then |
| # try to pull |
| adb pull "$1" "$2" >/dev/null 2>&1 && return 0 |
| |
| return 1 |
| else |
| # try to copy |
| cp -r "$SRC/$1" "$2" 2>/dev/null && return 0 |
| cp -r "$SRC/${1#/system}" "$2" 2>/dev/null && return 0 |
| cp -r "$SRC/system/$1" "$2" 2>/dev/null && return 0 |
| |
| return 1 |
| fi |
| }; |
| |
| # |
| # oat2dex: |
| # |
| # $1: extracted apk|jar (to check if deodex is required) |
| # $2: odexed apk|jar to deodex |
| # $3: source of the odexed apk|jar |
| # |
| # Convert apk|jar .odex in the corresposing classes.dex |
| # |
| function oat2dex() { |
| local LINEAGE_TARGET="$1" |
| local OEM_TARGET="$2" |
| local SRC="$3" |
| local TARGET= |
| local OAT= |
| local HOST="$(uname)" |
| |
| if [ -z "$BAKSMALIJAR" ] || [ -z "$SMALIJAR" ]; then |
| export BAKSMALIJAR="$LINEAGE_ROOT"/vendor/lineage/build/tools/smali/baksmali.jar |
| export SMALIJAR="$LINEAGE_ROOT"/vendor/lineage/build/tools/smali/smali.jar |
| fi |
| |
| if [ -z "$VDEXEXTRACTOR" ]; then |
| export VDEXEXTRACTOR="$LINEAGE_ROOT"/vendor/lineage/build/tools/"$HOST"/vdexExtractor |
| fi |
| |
| if [ -z "$CDEXCONVERTER" ]; then |
| export CDEXCONVERTER="$LINEAGE_ROOT"/vendor/lineage/build/tools/"$HOST"/compact_dex_converter |
| fi |
| |
| # Extract existing boot.oats to the temp folder |
| if [ -z "$ARCHES" ]; then |
| echo "Checking if system is odexed and locating boot.oats..." |
| for ARCH in "arm64" "arm" "x86_64" "x86"; do |
| mkdir -p "$TMPDIR/system/framework/$ARCH" |
| if get_file "/system/framework/$ARCH" "$TMPDIR/system/framework/" "$SRC"; then |
| ARCHES+="$ARCH " |
| else |
| rmdir "$TMPDIR/system/framework/$ARCH" |
| fi |
| done |
| fi |
| |
| if [ -z "$ARCHES" ]; then |
| FULLY_DEODEXED=1 && return 0 # system is fully deodexed, return |
| fi |
| |
| if [ ! -f "$LINEAGE_TARGET" ]; then |
| return; |
| fi |
| |
| if grep "classes.dex" "$LINEAGE_TARGET" >/dev/null; then |
| return 0 # target apk|jar is already odexed, return |
| fi |
| |
| for ARCH in $ARCHES; do |
| BOOTOAT="$TMPDIR/system/framework/$ARCH/boot.oat" |
| |
| local OAT="$(dirname "$OEM_TARGET")/oat/$ARCH/$(basename "$OEM_TARGET" ."${OEM_TARGET##*.}").odex" |
| local VDEX="$(dirname "$OEM_TARGET")/oat/$ARCH/$(basename "$OEM_TARGET" ."${OEM_TARGET##*.}").vdex" |
| |
| if get_file "$OAT" "$TMPDIR" "$SRC"; then |
| if get_file "$VDEX" "$TMPDIR" "$SRC"; then |
| "$VDEXEXTRACTOR" -o "$TMPDIR/" -i "$TMPDIR/$(basename "$VDEX")" > /dev/null |
| # Check if we have to deal with CompactDex |
| if [ -f "$TMPDIR/$(basename "${OEM_TARGET%.*}")_classes.cdex" ]; then |
| "$CDEXCONVERTER" "$TMPDIR/$(basename "${OEM_TARGET%.*}")_classes.cdex" &> /dev/null |
| mv "$TMPDIR/$(basename "${OEM_TARGET%.*}")_classes.cdex.new" "$TMPDIR/classes.dex" |
| else |
| mv "$TMPDIR/$(basename "${OEM_TARGET%.*}")_classes.dex" "$TMPDIR/classes.dex" |
| fi |
| else |
| java -jar "$BAKSMALIJAR" deodex -o "$TMPDIR/dexout" -b "$BOOTOAT" -d "$TMPDIR" "$TMPDIR/$(basename "$OAT")" |
| java -jar "$SMALIJAR" assemble "$TMPDIR/dexout" -o "$TMPDIR/classes.dex" |
| fi |
| elif [[ "$LINEAGE_TARGET" =~ .jar$ ]]; then |
| JAROAT="$TMPDIR/system/framework/$ARCH/boot-$(basename ${OEM_TARGET%.*}).oat" |
| JARVDEX="/system/framework/boot-$(basename ${OEM_TARGET%.*}).vdex" |
| if [ ! -f "$JAROAT" ]; then |
| JAROAT=$BOOTOAT |
| fi |
| # try to extract classes.dex from boot.vdex for frameworks jars |
| # fallback to boot.oat if vdex is not available |
| if get_file "$JARVDEX" "$TMPDIR" "$SRC"; then |
| "$VDEXEXTRACTOR" -o "$TMPDIR/" -i "$TMPDIR/$(basename "$JARVDEX")" > /dev/null |
| # Check if we have to deal with CompactDex |
| if [ -f "$TMPDIR/$(basename "${JARVDEX%.*}")_classes.cdex" ]; then |
| "$CDEXCONVERTER" "$TMPDIR/$(basename "${JARVDEX%.*}")_classes.cdex" &> /dev/null |
| mv "$TMPDIR/$(basename "${JARVDEX%.*}")_classes.cdex.new" "$TMPDIR/classes.dex" |
| else |
| mv "$TMPDIR/$(basename "${JARVDEX%.*}")_classes.dex" "$TMPDIR/classes.dex" |
| fi |
| else |
| java -jar "$BAKSMALIJAR" deodex -o "$TMPDIR/dexout" -b "$BOOTOAT" -d "$TMPDIR" "$JAROAT/$OEM_TARGET" |
| java -jar "$SMALIJAR" assemble "$TMPDIR/dexout" -o "$TMPDIR/classes.dex" |
| fi |
| else |
| continue |
| fi |
| |
| done |
| |
| rm -rf "$TMPDIR/dexout" |
| } |
| |
| # |
| # init_adb_connection: |
| # |
| # Starts adb server and waits for the device |
| # |
| function init_adb_connection() { |
| adb start-server # Prevent unexpected starting server message from adb get-state in the next line |
| if ! _adb_connected; then |
| echo "No device is online. Waiting for one..." |
| echo "Please connect USB and/or enable USB debugging" |
| until _adb_connected; do |
| sleep 1 |
| done |
| echo "Device Found." |
| fi |
| |
| # Retrieve IP and PORT info if we're using a TCP connection |
| TCPIPPORT=$(adb devices | egrep '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+:[0-9]+[^0-9]+' \ |
| | head -1 | awk '{print $1}') |
| adb root &> /dev/null |
| sleep 0.3 |
| if [ -n "$TCPIPPORT" ]; then |
| # adb root just killed our connection |
| # so reconnect... |
| adb connect "$TCPIPPORT" |
| fi |
| adb wait-for-device &> /dev/null |
| sleep 0.3 |
| } |
| |
| # |
| # fix_xml: |
| # |
| # $1: xml file to fix |
| # |
| function fix_xml() { |
| local XML="$1" |
| local TEMP_XML="$TMPDIR/`basename "$XML"`.temp" |
| |
| grep -a '^<?xml version' "$XML" > "$TEMP_XML" |
| grep -av '^<?xml version' "$XML" >> "$TEMP_XML" |
| |
| mv "$TEMP_XML" "$XML" |
| } |
| |
| function print_spec() { |
| local SPEC_PRODUCT_PACKAGE="$1" |
| local SPEC_SRC_FILE="$2" |
| local SPEC_DST_FILE="$3" |
| local SPEC_ARGS="$4" |
| local SPEC_HASH="$5" |
| |
| local PRODUCT_PACKAGE="" |
| if [ ${SPEC_PRODUCT_PACKAGE} = true ]; then |
| PRODUCT_PACKAGE="-" |
| fi |
| local SRC="" |
| if [ ! -z "${SPEC_SRC_FILE}" ] && [ "${SPEC_SRC_FILE}" != "${SPEC_DST_FILE}" ]; then |
| SRC="${SPEC_SRC_FILE}:" |
| fi |
| local DST="" |
| if [ ! -z "${SPEC_DST_FILE}" ]; then |
| DST="${SPEC_DST_FILE}" |
| fi |
| local ARGS="" |
| if [ ! -z "${SPEC_ARGS}" ]; then |
| ARGS=";${SPEC_ARGS}" |
| fi |
| local HASH="" |
| if [ ! -z "${SPEC_HASH}" ] && [ "${SPEC_HASH}" != "x" ]; then |
| HASH="|${SPEC_HASH}" |
| fi |
| printf '%s%s%s%s%s\n' "${PRODUCT_PACKAGE}" "${SRC}" "${DST}" "${ARGS}" "${HASH}" |
| } |
| |
| # |
| # extract: |
| # |
| # Positional parameters: |
| # $1: file containing the list of items to extract (aka proprietary-files.txt) |
| # $2: path to extracted system folder, an ota zip file, or "adb" to extract from device |
| # $3: section in list file to extract - optional. Setting section via $3 is deprecated. |
| # |
| # Non-positional parameters (coming after $2): |
| # --section: preferred way of selecting the portion to parse and extract from |
| # proprietary-files.txt |
| # --kang: if present, this option will activate the printing of hashes for the |
| # extracted blobs. Useful with --section for subsequent pinning of |
| # blobs taken from other origins. |
| # |
| function extract() { |
| # Consume positional parameters |
| local PROPRIETARY_FILES_TXT="$1"; shift |
| local SRC="$1"; shift |
| local SECTION="" |
| local KANG=false |
| |
| # Consume optional, non-positional parameters |
| while [ "$#" -gt 0 ]; do |
| case "$1" in |
| -s|--section) |
| SECTION="$2"; shift |
| ;; |
| -k|--kang) |
| KANG=true |
| DISABLE_PINNING=1 |
| ;; |
| *) |
| # Backwards-compatibility with the old behavior, where $3, if |
| # present, denoted an optional positional ${SECTION} argument. |
| # Users of ${SECTION} are encouraged to migrate from setting it as |
| # positional $3, to non-positional --section ${SECTION}, the |
| # reason being that it doesn't scale to have more than 1 optional |
| # positional argument. |
| SECTION="$1" |
| ;; |
| esac |
| shift |
| done |
| |
| if [ -z "$OUTDIR" ]; then |
| echo "Output dir not set!" |
| exit 1 |
| fi |
| |
| parse_file_list "${PROPRIETARY_FILES_TXT}" "${SECTION}" |
| |
| # Allow failing, so we can try $DEST and/or $FILE |
| set +e |
| |
| local FILELIST=( ${PRODUCT_COPY_FILES_LIST[@]} ${PRODUCT_PACKAGES_LIST[@]} ) |
| local HASHLIST=( ${PRODUCT_COPY_FILES_HASHES[@]} ${PRODUCT_PACKAGES_HASHES[@]} ) |
| local PRODUCT_COPY_FILES_COUNT=${#PRODUCT_COPY_FILES_LIST[@]} |
| local COUNT=${#FILELIST[@]} |
| local OUTPUT_ROOT="$LINEAGE_ROOT"/"$OUTDIR"/proprietary |
| local OUTPUT_TMP="$TMPDIR"/"$OUTDIR"/proprietary |
| |
| if [ "$SRC" = "adb" ]; then |
| init_adb_connection |
| fi |
| |
| if [ -f "$SRC" ] && [ "${SRC##*.}" == "zip" ]; then |
| DUMPDIR="$TMPDIR"/system_dump |
| |
| # Check if we're working with the same zip that was passed last time. |
| # If so, let's just use what's already extracted. |
| MD5=`md5sum "$SRC"| awk '{print $1}'` |
| OLDMD5=`cat "$DUMPDIR"/zipmd5.txt` |
| |
| if [ "$MD5" != "$OLDMD5" ]; then |
| rm -rf "$DUMPDIR" |
| mkdir "$DUMPDIR" |
| unzip "$SRC" -d "$DUMPDIR" |
| echo "$MD5" > "$DUMPDIR"/zipmd5.txt |
| |
| # Stop if an A/B OTA zip is detected. We cannot extract these. |
| if [ -a "$DUMPDIR"/payload.bin ]; then |
| echo "A/B style OTA zip detected. This is not supported at this time. Stopping..." |
| exit 1 |
| # If OTA is block based, extract it. |
| elif [ -a "$DUMPDIR"/system.new.dat ]; then |
| echo "Converting system.new.dat to system.img" |
| python "$LINEAGE_ROOT"/vendor/lineage/build/tools/sdat2img.py "$DUMPDIR"/system.transfer.list "$DUMPDIR"/system.new.dat "$DUMPDIR"/system.img 2>&1 |
| rm -rf "$DUMPDIR"/system.new.dat "$DUMPDIR"/system |
| mkdir "$DUMPDIR"/system "$DUMPDIR"/tmp |
| echo "Requesting sudo access to mount the system.img" |
| sudo mount -o loop "$DUMPDIR"/system.img "$DUMPDIR"/tmp |
| cp -r "$DUMPDIR"/tmp/* "$DUMPDIR"/system/ |
| sudo umount "$DUMPDIR"/tmp |
| rm -rf "$DUMPDIR"/tmp "$DUMPDIR"/system.img |
| fi |
| fi |
| |
| SRC="$DUMPDIR" |
| fi |
| |
| if [ "$VENDOR_STATE" -eq "0" ]; then |
| echo "Cleaning output directory ($OUTPUT_ROOT).." |
| rm -rf "${OUTPUT_TMP:?}" |
| mkdir -p "${OUTPUT_TMP:?}" |
| if [ -d "$OUTPUT_ROOT" ]; then |
| mv "${OUTPUT_ROOT:?}/"* "${OUTPUT_TMP:?}/" |
| fi |
| VENDOR_STATE=1 |
| fi |
| |
| echo "Extracting ${COUNT} files in ${PROPRIETARY_FILES_TXT} from ${SRC}:" |
| |
| for (( i=1; i<COUNT+1; i++ )); do |
| |
| local SPEC_SRC_FILE=$(src_file "${FILELIST[$i-1]}") |
| local SPEC_DST_FILE=$(target_file "${FILELIST[$i-1]}") |
| local SPEC_ARGS=$(target_args "${FILELIST[$i-1]}") |
| local OUTPUT_DIR= |
| local TMP_DIR= |
| local SRC_FILE= |
| local DST_FILE= |
| local IS_PRODUCT_PACKAGE=false |
| |
| # Note: this relies on the fact that the ${FILELIST[@]} array |
| # contains first ${PRODUCT_COPY_FILES_LIST[@]}, then ${PRODUCT_PACKAGES_LIST[@]}. |
| if [ "${i}" -gt "${PRODUCT_COPY_FILES_COUNT}" ]; then |
| IS_PRODUCT_PACKAGE=true |
| fi |
| |
| if [ "${SPEC_ARGS}" = "rootfs" ]; then |
| OUTPUT_DIR="${OUTPUT_ROOT}/rootfs" |
| TMP_DIR="${OUTPUT_TMP}/rootfs" |
| SRC_FILE="/${SPEC_SRC_FILE}" |
| DST_FILE="/${SPEC_DST_FILE}" |
| else |
| OUTPUT_DIR="${OUTPUT_ROOT}" |
| TMP_DIR="${OUTPUT_TMP}" |
| SRC_FILE="/system/${SPEC_SRC_FILE}" |
| DST_FILE="/system/${SPEC_DST_FILE}" |
| fi |
| |
| # Strip the file path in the vendor repo of "system", if present |
| local VENDOR_REPO_FILE="$OUTPUT_DIR/${DST_FILE#/system}" |
| local BLOB_DISPLAY_NAME="${DST_FILE#/system/}" |
| mkdir -p $(dirname "${VENDOR_REPO_FILE}") |
| |
| # Check pinned files |
| local HASH="$(echo ${HASHLIST[$i-1]} | awk '{ print tolower($0); }')" |
| local KEEP="" |
| if [ "$DISABLE_PINNING" != "1" ] && [ ! -z "$HASH" ] && [ "$HASH" != "x" ]; then |
| if [ -f "${VENDOR_REPO_FILE}" ]; then |
| local PINNED="${VENDOR_REPO_FILE}" |
| else |
| local PINNED="${TMP_DIR}${DST_FILE#/system}" |
| fi |
| if [ -f "$PINNED" ]; then |
| if [ "$(uname)" == "Darwin" ]; then |
| local TMP_HASH=$(shasum "$PINNED" | awk '{print $1}' ) |
| else |
| local TMP_HASH=$(sha1sum "$PINNED" | awk '{print $1}' ) |
| fi |
| if [ "$TMP_HASH" = "$HASH" ]; then |
| KEEP="1" |
| if [ ! -f "${VENDOR_REPO_FILE}" ]; then |
| cp -p "$PINNED" "${VENDOR_REPO_FILE}" |
| fi |
| fi |
| fi |
| fi |
| |
| if [ "${KANG}" = false ]; then |
| printf ' - %s\n' "${BLOB_DISPLAY_NAME}" |
| fi |
| |
| if [ "$KEEP" = "1" ]; then |
| printf ' + keeping pinned file with hash %s\n' "${HASH}" |
| else |
| FOUND=false |
| # Try Lineage target first. |
| # Also try to search for files stripped of |
| # the "/system" prefix, if we're actually extracting |
| # from a system image. |
| for CANDIDATE in "${DST_FILE}" "${SRC_FILE}"; do |
| get_file ${CANDIDATE} ${VENDOR_REPO_FILE} ${SRC} && { |
| FOUND=true |
| break |
| } |
| done |
| |
| if [ "${FOUND}" = false ]; then |
| printf ' !! %s: file not found in source\n' "${BLOB_DISPLAY_NAME}" |
| continue |
| fi |
| fi |
| |
| if [ "$?" == "0" ]; then |
| # Deodex apk|jar if that's the case |
| if [[ "$FULLY_DEODEXED" -ne "1" && "${VENDOR_REPO_FILE}" =~ .(apk|jar)$ ]]; then |
| oat2dex "${VENDOR_REPO_FILE}" "${SRC_FILE}" "$SRC" |
| if [ -f "$TMPDIR/classes.dex" ]; then |
| zip -gjq "${VENDOR_REPO_FILE}" "$TMPDIR/classes.dex" |
| rm "$TMPDIR/classes.dex" |
| printf ' (updated %s from odex files)\n' "${SRC_FILE}" |
| fi |
| elif [[ "${VENDOR_REPO_FILE}" =~ .xml$ ]]; then |
| fix_xml "${VENDOR_REPO_FILE}" |
| fi |
| fi |
| |
| if [ -f "${VENDOR_REPO_FILE}" ]; then |
| local DIR=$(dirname "${VENDOR_REPO_FILE}") |
| local TYPE="${DIR##*/}" |
| if [ "$TYPE" = "bin" -o "$TYPE" = "sbin" ]; then |
| chmod 755 "${VENDOR_REPO_FILE}" |
| else |
| chmod 644 "${VENDOR_REPO_FILE}" |
| fi |
| fi |
| |
| if [ "${KANG}" = true ]; then |
| print_spec "${IS_PRODUCT_PACKAGE}" "${SPEC_SRC_FILE}" "${SPEC_DST_FILE}" "${SPEC_ARGS}" "${HASH}" |
| fi |
| |
| done |
| |
| # Don't allow failing |
| set -e |
| } |
| |
| # |
| # extract_firmware: |
| # |
| # $1: file containing the list of items to extract |
| # $2: path to extracted radio folder |
| # |
| function extract_firmware() { |
| if [ -z "$OUTDIR" ]; then |
| echo "Output dir not set!" |
| exit 1 |
| fi |
| |
| parse_file_list "$1" |
| |
| # Don't allow failing |
| set -e |
| |
| local FILELIST=( ${PRODUCT_COPY_FILES_LIST[@]} ) |
| local COUNT=${#FILELIST[@]} |
| local SRC="$2" |
| local OUTPUT_DIR="$LINEAGE_ROOT"/"$OUTDIR"/radio |
| |
| if [ "$VENDOR_RADIO_STATE" -eq "0" ]; then |
| echo "Cleaning firmware output directory ($OUTPUT_DIR).." |
| rm -rf "${OUTPUT_DIR:?}/"* |
| VENDOR_RADIO_STATE=1 |
| fi |
| |
| echo "Extracting $COUNT files in $1 from $SRC:" |
| |
| for (( i=1; i<COUNT+1; i++ )); do |
| local FILE="${FILELIST[$i-1]}" |
| printf ' - %s \n' "/radio/$FILE" |
| |
| if [ ! -d "$OUTPUT_DIR" ]; then |
| mkdir -p "$OUTPUT_DIR" |
| fi |
| cp "$SRC/$FILE" "$OUTPUT_DIR/$FILE" |
| chmod 644 "$OUTPUT_DIR/$FILE" |
| done |
| } |