| <?xml version="1.0" encoding="UTF-8"?> |
| <!-- Copyright (C) 2009 The Android Open Source Project |
| |
| Licensed under the Apache License, Version 2.0 (the "License"); |
| you may not use this file except in compliance with the License. |
| You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| <resources xmlns:android="http://schemas.android.com/apk/res/android" |
| xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| <string name="device_info_default">"未知"</string> |
| <string name="turn_on_radio">"打开收音机"</string> |
| <string name="turn_off_radio">"关闭收音机"</string> |
| <string name="turn_on_qxdm">"启用 QXDM SD 日志"</string> |
| <string name="turn_off_qxdm">"禁用 QXDM SD 日志"</string> |
| <string name="radioInfo_menu_viewADN">"查看 SIM 卡地址簿"</string> |
| <string name="radioInfo_menu_viewFDN">"查看固定拨号"</string> |
| <string name="radioInfo_menu_viewSDN">"查看服务拨号"</string> |
| <string name="radioInfo_menu_getPDP">"获取 PDP 列表"</string> |
| <string name="radioInfo_menu_enableData">"启用数据连接"</string> |
| <string name="radioInfo_menu_disableData">"禁用数据连接"</string> |
| <string name="radioInfo_menu_enableDataOnBoot">"引导时启用数据"</string> |
| <string name="radioInfo_menu_disableDataOnBoot">"引导时禁用数据"</string> |
| <string name="radioInfo_service_in">"在使用中"</string> |
| <string name="radioInfo_service_out">"不在服务区"</string> |
| <string name="radioInfo_service_emergency">"仅紧急呼叫"</string> |
| <string name="radioInfo_service_off">"收音机已关闭"</string> |
| <string name="radioInfo_roaming_in">"漫游"</string> |
| <string name="radioInfo_roaming_not">"无漫游"</string> |
| <string name="radioInfo_phone_idle">"空闲"</string> |
| <string name="radioInfo_phone_ringing">"正在响铃"</string> |
| <string name="radioInfo_phone_offhook">"正在通话"</string> |
| <string name="radioInfo_data_disconnected">"已断开连接"</string> |
| <string name="radioInfo_data_connecting">"正在连接"</string> |
| <string name="radioInfo_data_connected">"已连接"</string> |
| <string name="radioInfo_data_suspended">"已挂起"</string> |
| <string name="radioInfo_unknown">"未知"</string> |
| <string name="radioInfo_display_packets">"pkts"</string> |
| <string name="radioInfo_display_bytes">"字节"</string> |
| <string name="radioInfo_display_dbm">"dBm"</string> |
| <string name="radioInfo_display_asu">"asu"</string> |
| <string name="radioInfo_lac">"LAC"</string> |
| <string name="radioInfo_cid">"CID"</string> |
| <string name="sdcard_unmount">"卸下 SD 卡"</string> |
| <string name="sdcard_format">"格式化 SD 卡"</string> |
| <string name="small_font">"小"</string> |
| <string name="medium_font">"中"</string> |
| <string name="large_font">"大"</string> |
| <string name="font_size_save">"确定"</string> |
| <string name="sdcard_setting">"SD 卡"</string> |
| <string name="battery_info_status_label">"电池状态："</string> |
| <string name="battery_info_scale_label">"电池容量："</string> |
| <string name="battery_info_level_label">"电池级别："</string> |
| <string name="battery_info_health_label">"电池健康状态："</string> |
| <string name="battery_info_technology_label">"电池技术："</string> |
| <string name="battery_info_voltage_label">"电池电压："</string> |
| <string name="battery_info_voltage_units">"mV"</string> |
| <string name="battery_info_temperature_label">"电池温度："</string> |
| <string name="battery_info_temperature_units">"° C"</string> |
| <string name="battery_info_uptime">"自引导以来的时间："</string> |
| <string name="battery_info_awake_battery">"电池的唤醒时间："</string> |
| <string name="battery_info_awake_plugged">"充电时的唤醒时间："</string> |
| <string name="battery_info_screen_on">"屏幕开启时间："</string> |
| <string name="battery_info_status_unknown">"未知"</string> |
| <string name="battery_info_status_charging">"正在充电"</string> |
| <string name="battery_info_status_charging_ac">"(AC)"</string> |
| <string name="battery_info_status_charging_usb">"(USB)"</string> |
| <string name="battery_info_status_discharging">"正在放电"</string> |
| <string name="battery_info_status_not_charging">"未在充电"</string> |
| <string name="battery_info_status_full">"已满"</string> |
| <string name="battery_info_health_unknown">"未知"</string> |
| <string name="battery_info_health_good">"较强"</string> |
| <string name="battery_info_health_overheat">"过热"</string> |
| <string name="battery_info_health_dead">"没电"</string> |
| <string name="battery_info_health_over_voltage">"过电压"</string> |
| <string name="battery_info_health_unspecified_failure">"未知错误"</string> |
| <string name="bluetooth">"蓝牙"</string> |
| <string name="bluetooth_visibility">"可发现"</string> |
| <string name="bluetooth_is_discoverable">"<xliff:g id="DISCOVERABLE_TIME_PERIOD">%1$s</xliff:g> 秒内可发现..."</string> |
| <string name="bluetooth_not_discoverable">"让设备能被搜索到"</string> |
| <string name="bluetooth_devices">"蓝牙设备"</string> |
| <string name="bluetooth_device_name">"设备名称"</string> |
| <string name="bluetooth_name_not_set">"无名称集，使用帐户名"</string> |
| <string name="bluetooth_scan_for_devices">"扫描以找到设备"</string> |
| <string name="bluetooth_disconnect_blank">"<xliff:g id="DEVICE_NAME">%1$s</xliff:g>会断开连接。"</string> |
| <string name="bluetooth_connected">"已连接"</string> |
| <string name="bluetooth_disconnected">"已断开连接"</string> |
| <string name="bluetooth_disconnecting">"正在断开连接..."</string> |
| <string name="bluetooth_connecting">"正在连接..."</string> |
| <!-- no translation found for bluetooth_unknown (644716244548801421) --> |
| <skip /> |
| <string name="bluetooth_not_connected">"与此设备配对"</string> |
| <string name="bluetooth_pairing">"正在配对..."</string> |
| <string name="bluetooth_paired">"已配对。已断开连接。"</string> |
| <string name="bluetooth_device">"免持听筒/耳机"</string> |
| <string name="progress_scanning">"正在扫描"</string> |
| <string name="bluetooth_notif_ticker">"蓝牙配对请求"</string> |
| <string name="bluetooth_notif_title">"配对请求"</string> |
| <string name="bluetooth_notif_message">"选择以与以下对象配对"</string> |
| <string name="date_and_time">"日期和时间设置"</string> |
| <string name="date_time_12_hour_sample">"下午 1:00"</string> |
| <string name="date_time_24_hour_sample">"13:00"</string> |
| <string name="choose_timezone">"选择时区"</string> |
| <string name="display_preview_label">"预览："</string> |
| <string name="display_font_size_label">"字体大小："</string> |
| <!-- no translation found for intent_sender_data_label (6332324780477289261) --> |
| <skip /> |
| <string name="intent_sender_sendbroadcast_text">"发送<xliff:g id="BROADCAST">broadcast</xliff:g>"</string> |
| <string name="intent_sender_action_label">"<xliff:g id="ACTION">Action</xliff:g>："</string> |
| <string name="intent_sender_startactivity_text">"开始 <xliff:g id="ACTIVITY">activity</xliff:g>"</string> |
| <string name="intent_sender_resource_label">"<xliff:g id="RESOURCE">Resource</xliff:g>："</string> |
| <string name="intent_sender_account_label">"帐户："</string> |
| <string name="proxy_clear_text">"清除"</string> |
| <string name="proxy_port_label">"端口"</string> |
| <string name="proxy_defaultView_text">"恢复默认值"</string> |
| <string name="proxy_action_text">"保存"</string> |
| <string name="proxy_hostname_label">"主机名"</string> |
| <string name="proxy_error">"注意"</string> |
| <string name="proxy_error_dismiss">"确定"</string> |
| <string name="proxy_error_invalid_host">"您键入的主机名无效。"</string> |
| <string name="proxy_error_empty_port">"必须完成端口字段。"</string> |
| <string name="proxy_error_empty_host_set_port">"如果主机字段为空，则端口字段必须为空。"</string> |
| <string name="proxy_error_invalid_port">"您键入的端口无效。"</string> |
| <string name="radio_info_signal_location_label">"位置："</string> |
| <string name="radio_info_neighboring_location_label">"相邻的 CID："</string> |
| <string name="radio_info_data_attempts_label">"数据尝试："</string> |
| <string name="radio_info_gprs_service_label">"GPRS 服务："</string> |
| <string name="radio_info_roaming_label">"漫游："</string> |
| <string name="radio_info_imei_label">"IMEI："</string> |
| <string name="radio_info_call_redirect_label">"呼叫重定向："</string> |
| <string name="radio_info_ppp_resets_label">"引导后已重设的 PPP 数："</string> |
| <string name="radio_info_gsm_disconnects_label">"GSM 断开连接："</string> |
| <string name="radio_info_current_network_label">"当前网络："</string> |
| <string name="radio_info_data_successes_label">"数据成功："</string> |
| <string name="radio_info_ppp_received_label">"已收到 PPP："</string> |
| <string name="radio_info_gsm_service_label">"GSM 服务："</string> |
| <string name="radio_info_signal_strength_label">"信号强度："</string> |
| <string name="radio_info_call_status_label">"呼叫状态："</string> |
| <string name="radio_info_ppp_sent_label">"已发送 PPP："</string> |
| <string name="radio_info_radio_resets_label">"收音机重设："</string> |
| <string name="radio_info_message_waiting_label">"消息等待："</string> |
| <string name="radio_info_phone_number_label">"手机号："</string> |
| <string name="radio_info_band_mode_label">"选择收音机波段"</string> |
| <string name="radio_info_network_type_label">"网络类型："</string> |
| <string name="radio_info_set_perferred_label">"设置首选的网络类型："</string> |
| <string name="radio_info_ping_ipaddr">"Ping IpAddr："</string> |
| <string name="radio_info_ping_hostname">"Ping 主机名 (www.google.com)："</string> |
| <string name="radio_info_http_client_test">"HTTP 客户端测试："</string> |
| <string name="radio_info_toggle_ciph_label">"切换加密"</string> |
| <string name="ping_test_label">"进行 Ping 测试"</string> |
| <string name="radio_info_smsc_label">"SMSC："</string> |
| <string name="radio_info_smsc_update_label">"更新"</string> |
| <string name="radio_info_smsc_refresh_label">"刷新"</string> |
| <string name="radio_info_toggle_dns_check_label">"切换 DNS 检查"</string> |
| <string name="band_mode_title">"设置 GSM/UMTS 波段"</string> |
| <string name="band_mode_loading">"正在载入波段列表..."</string> |
| <string name="band_mode_set">"设置"</string> |
| <string name="band_mode_failed">"失败"</string> |
| <string name="band_mode_succeeded">"成功"</string> |
| <string name="sdcard_changes_instructions">"更改会在重新连接 USB 电缆后生效"</string> |
| <string name="sdcard_settings_screen_mass_storage_text">"启用 USB 大容量存储"</string> |
| <string name="sdcard_settings_total_bytes_label">"字节总数："</string> |
| <string name="sdcard_settings_not_present_status">"无 SD 卡"</string> |
| <string name="sdcard_settings_available_bytes_label">"可用的字节数："</string> |
| <string name="sdcard_settings_mass_storage_status">"正在将 SD 卡用作大容量存储设备"</string> |
| <string name="sdcard_settings_unmounted_status">"现在可以安全卸下 SD 卡"</string> |
| <string name="sdcard_settings_bad_removal_status">"SD 卡在使用过程中被卸下！"</string> |
| <string name="sdcard_settings_used_bytes_label">"使用的字节数："</string> |
| <string name="sdcard_settings_scanning_status">"正在扫描 SD 卡以获取媒体..."</string> |
| <string name="sdcard_settings_read_only_status">"装载的 SD 卡为只读"</string> |
| <string name="next_label">"下一步"</string> |
| <string name="language_picker_title">"区域"</string> |
| <string name="select_your_language">"选择语言"</string> |
| <string name="activity_picker_label">"选择活动"</string> |
| <string name="device_info_label">"设备信息"</string> |
| <string name="battery_info_label">"电池信息"</string> |
| <string name="battery_history_label">"电池历史记录"</string> |
| <string name="display_label">"显示"</string> |
| <string name="phone_info_label">"手机信息"</string> |
| <string name="sd_card_settings_label">"SD 卡"</string> |
| <string name="proxy_settings_label">"代理设置"</string> |
| <string name="cancel">"取消"</string> |
| <string name="settings_label">"设置"</string> |
| <string name="airplane_mode">"飞航模式"</string> |
| <string name="airplane_mode_summary">"禁用所有无线连接"</string> |
| <string name="airplane_mode_turning_on">"正在禁用无线连接..."</string> |
| <string name="airplane_mode_turning_off">"正在启用无线连接..."</string> |
| <string name="radio_controls_title">"无线控件"</string> |
| <string name="radio_controls_summary">"管理 Wi-Fi、蓝牙、飞航模式和移动网络"</string> |
| <string name="date_and_time_settings_title">"日期和时间"</string> |
| <string name="date_and_time_settings_summary">"设置日期、时间、时区和格式"</string> |
| <string name="date_time_auto">"自动"</string> |
| <string name="date_time_auto_summaryOn">"使用网络提供的值"</string> |
| <string name="date_time_auto_summaryOff">"使用网络提供的值"</string> |
| <string name="date_time_24hour">"使用 24 小时格式"</string> |
| <string name="date_time_set_time">"设置时间"</string> |
| <string name="date_time_set_timezone">"选择时区"</string> |
| <string name="date_time_set_date">"设置日期"</string> |
| <string name="date_time_date_format">"选择日期格式"</string> |
| <string name="zone_list_menu_sort_alphabetically">"按字母顺序排序"</string> |
| <string name="zone_list_menu_sort_by_timezone">"按时区排序"</string> |
| <string name="security_settings_title">"安全性和位置"</string> |
| <string name="security_settings_summary">"设置我的位置、屏幕解锁、SIM 卡锁定"</string> |
| <string name="security_passwords_title">"密码"</string> |
| <string name="bluetooth_quick_toggle_title">"蓝牙"</string> |
| <string name="bluetooth_quick_toggle_summary">"打开蓝牙"</string> |
| <string name="bluetooth_settings">"蓝牙设置"</string> |
| <string name="bluetooth_settings_title">"蓝牙设置"</string> |
| <string name="bluetooth_settings_summary">"管理连接，设置设备名称和可发现性"</string> |
| <string name="bluetooth_pin_entry">"蓝牙配对请求"</string> |
| <string name="bluetooth_device_info">"蓝牙设备信息"</string> |
| <string name="bluetooth_enter_pin_msg">"<xliff:g id="DEVICE_NAME">%1$s</xliff:g>"\n\n"键入 PIN 码以配对。"\n"（尝试键入 0000 或 1234。）"</string> |
| <string name="bluetooth_error_title">"注意"</string> |
| <string name="bluetooth_pairing_error_message">"与<xliff:g id="DEVICE_NAME">%1$s</xliff:g>配对时出现问题。"</string> |
| <string name="bluetooth_pairing_pin_error_message">"与<xliff:g id="DEVICE_NAME">%1$s</xliff:g>配对时出现问题，因为键入的 PIN 码不正确。"</string> |
| <string name="bluetooth_connecting_error_message">"连接至<xliff:g id="DEVICE_NAME">%1$s</xliff:g>时出现问题。"</string> |
| <string name="bluetooth_preference_scan_title">"扫描以找到设备"</string> |
| <string name="bluetooth_device_context_connect">"连接"</string> |
| <string name="bluetooth_device_context_disconnect">"断开连接"</string> |
| <string name="bluetooth_device_context_pair_connect">"配对和连接"</string> |
| <string name="bluetooth_device_context_unpair">"取消配对"</string> |
| <string name="bluetooth_device_context_disconnect_unpair">"断开连接并取消配对"</string> |
| <string name="bluetooth_device_context_connect_advanced">"选项..."</string> |
| <string name="bluetooth_connect_specific_profiles_title">"连接至..."</string> |
| <string name="bluetooth_profile_a2dp">"媒体"</string> |
| <string name="bluetooth_profile_headset">"手机"</string> |
| <string name="bluetooth_summary_connected_to_a2dp">"已连接至媒体音频"</string> |
| <string name="bluetooth_summary_connected_to_headset">"已连接至手机音频"</string> |
| <string name="bluetooth_summary_connected_to_a2dp_headset">"已连接至手机和媒体音频"</string> |
| <string name="bluetooth_device_advanced_title">"<xliff:g id="DEVICE_NAME">%1$s</xliff:g>选项"</string> |
| <string name="bluetooth_device_advanced_online_mode_title">"连接"</string> |
| <string name="bluetooth_device_advanced_online_mode_summary">"连接至蓝牙设备"</string> |
| <string name="bluetooth_device_advanced_profile_header_title">"个人资料"</string> |
| <string name="bluetooth_a2dp_profile_summary_connected">"已连接至媒体音频"</string> |
| <string name="bluetooth_headset_profile_summary_connected">"已连接至手机音频"</string> |
| <string name="bluetooth_a2dp_profile_summary_use_for">"用于媒体音频"</string> |
| <string name="bluetooth_headset_profile_summary_use_for">"用于手机音频"</string> |
| <string name="wifi">"Wi-Fi"</string> |
| <string name="wifi_quick_toggle_title">"Wi-Fi"</string> |
| <string name="wifi_quick_toggle_summary">"打开 Wi-Fi"</string> |
| <string name="wifi_settings">"Wi-Fi 设置"</string> |
| <string name="wifi_settings_category">"Wi-Fi 设置"</string> |
| <string name="wifi_settings_summary">"设置和管理无线接入点"</string> |
| <string name="forget_network">"忘记"</string> |
| <string name="wifi_status">"状态"</string> |
| <string name="wifi_link_speed">"速度"</string> |
| <string name="wifi_signal_3">"极强"</string> |
| <string name="wifi_signal_2">"较强"</string> |
| <string name="wifi_signal_1">"强"</string> |
| <string name="wifi_signal_0">"弱"</string> |
| <string name="security">"安全性"</string> |
| <string name="wifi_security_open">"开放"</string> |
| <string name="wifi_security_wep">"WEP"</string> |
| <string name="wifi_security_wpa">"WPA"</string> |
| <string name="wifi_security_wpa2">"WPA2"</string> |
| <string name="wifi_security_unknown">"未知"</string> |
| <string name="wifi_security_verbose_open">"打开网络"</string> |
| <string name="wifi_security_verbose_wep">"用 WEP 保护"</string> |
| <string name="wifi_security_verbose_wpa">"通过 WPA 保护"</string> |
| <string name="wifi_security_verbose_wpa2">"通过 WPA2 保护"</string> |
| <string name="ip_address">"IP 地址"</string> |
| <string name="signal">"信号强度"</string> |
| <string name="wifi_starting">"正在打开..."</string> |
| <string name="wifi_stopping">"正在关闭..."</string> |
| <string name="wifi_error">"错误"</string> |
| <string name="error_starting">"无法启动 Wi-Fi"</string> |
| <string name="error_stopping">"无法停止 Wi-Fi"</string> |
| <string name="error_scanning">"无法扫描以找到网络"</string> |
| <string name="error_connecting">"无法连接至网络"</string> |
| <string name="error_saving">"无法保存网络"</string> |
| <string name="connect">"连接"</string> |
| <string name="connect_to_blank">"连接至 <xliff:g id="NETWORK_NAME">%1$s</xliff:g>"</string> |
| <string name="please_type_passphrase">"无线密码"</string> |
| <string name="please_type_hex_key">"WEP 十六进制键（0-9、A-F）"</string> |
| <string name="wifi_show_password">"显示密码。"</string> |
| <string name="scan_wifi">"扫描"</string> |
| <string name="summary_not_in_range">"不在范围之内"</string> |
| <string name="summary_remembered">"已记忆"</string> |
| <string name="summary_connection_failed">"连接失败，请选择以重试"</string> |
| <string name="wifi_access_points">"Wi-Fi 网络"</string> |
| <string name="wifi_type_ssid">"网络 SSID"</string> |
| <string name="wifi_security">"安全性"</string> |
| <string name="wifi_save_config">"保存"</string> |
| <string name="wifi_password_unchanged">"（未更改）"</string> |
| <string name="wifi_add_other_network">"添加 Wi-Fi 网络"</string> |
| <string name="wifi_notify_open_networks">"网络通知"</string> |
| <string name="wifi_notify_open_networks_summary">"当有开放网络可用时通知我"</string> |
| <string name="wifi_password_incorrect_error">"您键入的网络密码不正确。请重试。"</string> |
| <string name="wifi_generic_connection_error">"连接至网络时出现问题。请重试。"</string> |
| <string name="wifi_menu_advanced">"高级"</string> |
| <string name="wifi_ip_settings_titlebar">"IP 设置"</string> |
| <string name="wifi_ip_settings_menu_save">"保存"</string> |
| <string name="wifi_ip_settings_menu_cancel">"取消"</string> |
| <string name="wifi_ip_settings_invalid_ip">"请键入有效的 IP 地址。"</string> |
| <string name="wifi_use_static_ip">"使用静态 IP"</string> |
| <string name="wifi_ip_address">"IP 地址"</string> |
| <string name="wifi_dns1">"DNS 1"</string> |
| <string name="wifi_dns2">"DNS 2"</string> |
| <string name="wifi_gateway">"网关"</string> |
| <string name="wifi_netmask">"网络掩码"</string> |
| <string name="wifi_context_menu_connect">"连接至网络"</string> |
| <string name="wifi_context_menu_forget">"忘记网络"</string> |
| <string name="wifi_context_menu_change_password">"更改密码"</string> |
| <string name="wifi_advanced_titlebar">"高级"</string> |
| <string name="wifi_setting_num_channels_title">"调节域"</string> |
| <string name="wifi_setting_num_channels_summary">"设置要使用的频道数"</string> |
| <string name="wifi_setting_num_channels_error">"设置调节域时出现问题。"</string> |
| <string name="wifi_setting_num_channels_channel_phrase">"<xliff:g id="NUM_CHANNELS">%1$d</xliff:g> 个频道"</string> |
| <string name="wifi_setting_sleep_policy_title">"Wi-Fi 休眠策略"</string> |
| <string name="wifi_setting_sleep_policy_summary">"指定何时从 Wi-Fi 切换到手机数据"</string> |
| <string name="wifi_setting_sleep_policy_error">"设置休眠策略时出现问题。"</string> |
| <string name="wifi_advanced_mac_address_title">"MAC 地址"</string> |
| <string name="fragment_status_scanning">"正在扫描..."</string> |
| <string name="fragment_status_connecting">"正在连接至 <xliff:g id="NETWORK_NAME">%1$s</xliff:g>..."</string> |
| <string name="fragment_status_authenticating">"正在通过 <xliff:g id="NETWORK_NAME">%1$s</xliff:g> 验证..."</string> |
| <string name="fragment_status_obtaining_ip">"正在从 <xliff:g id="NETWORK_NAME">%1$s</xliff:g> 获取 IP 地址..."</string> |
| <string name="fragment_status_connected">"已连接至 <xliff:g id="NETWORK_NAME">%1$s</xliff:g>"</string> |
| <string name="fragment_status_disconnecting">"正在断开与 <xliff:g id="NETWORK_NAME">%1$s</xliff:g> 的连接..."</string> |
| <string name="fragment_status_disconnected">"已断开连接"</string> |
| <string name="fragment_status_failed">"失败"</string> |
| <string name="status_scanning">"正在扫描..."</string> |
| <string name="status_connecting">"正在连接..."</string> |
| <string name="status_authenticating">"正在验证..."</string> |
| <string name="status_obtaining_ip">"正在获取地址..."</string> |
| <string name="status_connected">"已连接"</string> |
| <string name="status_disconnecting">"正在断开连接..."</string> |
| <string name="status_disconnected">"已断开连接"</string> |
| <string name="status_failed">"失败"</string> |
| <string name="sound_and_display_settings">"声音和显示"</string> |
| <string name="sound_settings">"声音设置"</string> |
| <string name="sound_and_display_settings_summary">"设置铃声、通知、屏幕亮度"</string> |
| <string name="silent_mode_title">"静音模式"</string> |
| <string name="silent_mode_summary">"除媒体和闹钟之外的所有声音都被静音"</string> |
| <string name="ringtone_title">"手机铃声"</string> |
| <string name="ringtone_summary">"设置默认的来电铃声"</string> |
| <string name="ring_volume_title">"响铃音量"</string> |
| <string name="ring_volume_summary">"设置来电音量和通知音量"</string> |
| <string name="vibrate_title">"手机振动"</string> |
| <string name="vibrate_summary">"手机来电时振动"</string> |
| <string name="notification_sound_title">"通知铃声"</string> |
| <string name="notification_sound_summary">"设置默认的通知铃声"</string> |
| <string name="incoming_call_volume_title">"来电音量"</string> |
| <string name="notification_volume_title">"通知音量"</string> |
| <string name="checkbox_notification_same_as_incoming_call">"使用来电音量作为通知音量"</string> |
| <string name="notification_sound_dialog_title">"选择通知铃声"</string> |
| <string name="media_volume_title">"媒体音量"</string> |
| <string name="media_volume_summary">"设置音乐和视频的音量"</string> |
| <string name="dtmf_tone_enable_title">"屏幕按键音"</string> |
| <string name="dtmf_tone_enable_summary_on">"使用拨号面板时发出声音"</string> |
| <string name="dtmf_tone_enable_summary_off">"使用拨号面板时发出声音"</string> |
| <string name="sound_effects_enable_title">"操作音选择"</string> |
| <string name="sound_effects_enable_summary_on">"进行屏幕选择时发出声音"</string> |
| <string name="sound_effects_enable_summary_off">"进行屏幕选择时发出声音"</string> |
| <string name="play_media_notification_sounds_enable_title">"SD 卡通知"</string> |
| <string name="play_media_notification_sounds_enable_summary_on">"禁用 SD 卡通知声音"</string> |
| <string name="play_media_notification_sounds_enable_summary_off">"启用 SD 卡通知声音"</string> |
| <string name="sync_settings">"数据同步"</string> |
| <string name="sync_settings_summary">"选择同步哪些应用程序"</string> |
| <string name="display_settings">"显示设置"</string> |
| <string name="animations_title">"动画"</string> |
| <string name="animations_summary_on">"打开/关闭窗口时显示动画"</string> |
| <string name="animations_summary_off">"打开/关闭窗口时显示动画"</string> |
| <string name="brightness">"亮度"</string> |
| <string name="brightness_summary">"调整屏幕亮度"</string> |
| <string name="screen_timeout">"屏幕待机"</string> |
| <string name="screen_timeout_summary">"在屏幕自动关闭前调整延迟"</string> |
| <string name="sim_lock_settings">"SIM 卡锁定设置"</string> |
| <string name="sim_lock_settings_category">"设置 SIM 卡锁定"</string> |
| <string name="sim_lock_settings_title">"SIM 卡锁定"</string> |
| <string name="sim_pin_toggle">"锁定 SIM 卡"</string> |
| <string name="sim_lock_on">"需要 PIN 码才能使用手机"</string> |
| <string name="sim_lock_off">"需要 PIN 码才能使用手机"</string> |
| <string name="sim_pin_change">"更改 SIM 卡 PIN 码"</string> |
| <string name="sim_enter_pin">"SIM 卡 PIN 码"</string> |
| <string name="sim_enable_sim_lock">"锁定 SIM 卡"</string> |
| <string name="sim_disable_sim_lock">"解锁 SIM 卡"</string> |
| <string name="sim_enter_old">"旧 SIM 卡 PIN 码"</string> |
| <string name="sim_enter_new">"新 SIM 卡 PIN 码"</string> |
| <string name="sim_reenter_new">"重新键入新 PIN 码"</string> |
| <string name="sim_change_pin">"SIM 卡 PIN 码"</string> |
| <string name="sim_bad_pin">"PIN 码不正确！"</string> |
| <string name="sim_pins_dont_match">"PIN 码不匹配！"</string> |
| <string name="sim_change_failed">"无法更改 PIN 码。"\n"PIN 码可能不正确。"</string> |
| <string name="sim_change_succeeded">"SIM 卡 PIN 码更改成功"</string> |
| <string name="sim_lock_failed">"无法更改 SIM 卡锁定状态。"\n"PIN 码可能不正确。"</string> |
| <string name="sim_enter_ok">"确定"</string> |
| <string name="sim_enter_cancel">"取消"</string> |
| <string name="device_info_settings">"手机状态"</string> |
| <string name="system_update_settings_list_item_title">"系统更新"</string> |
| <string name="system_update_settings_list_item_summary">"检查系统更新"</string> |
| <string name="firmware_version">"固件版本"</string> |
| <string name="model_number">"型号"</string> |
| <string name="baseband_version">"Baseband 版本"</string> |
| <string name="kernel_version">"Kernel 版本"</string> |
| <string name="build_number">"内部版本号"</string> |
| <string name="device_info_not_available">"不可用"</string> |
| <string name="device_status_activity_title">"状态"</string> |
| <string name="device_status">"状态"</string> |
| <string name="device_status_summary">"IMEI、手机号、信号等"</string> |
| <string name="storage_settings_title">"SD 卡和手机存储"</string> |
| <string name="storage_settings_summary">"卸下 SD 卡，查看可用的存储空间"</string> |
| <string name="status_number">"手机号"</string> |
| <string name="status_network_type">"手机网络类型"</string> |
| <string name="status_data_state">"手机网络状态"</string> |
| <string name="status_service_state">"服务状态"</string> |
| <string name="status_signal_strength">"信号强度"</string> |
| <string name="status_roaming">"漫游"</string> |
| <string name="status_operator">"网络"</string> |
| <string name="status_wifi_mac_address">"Wi-Fi MAC 地址"</string> |
| <string name="status_bt_address">"蓝牙地址"</string> |
| <string name="status_unavailable">"不可用"</string> |
| <string name="status_network_traffic_stats">"网络使用"</string> |
| <string name="status_network_traffic_summary">"发送：<xliff:g id="NETWORK_TRAFFIC_0">%1$d packets, %2$d bytes%n</xliff:g> 接收：<xliff:g id="NETWORK_TRAFFIC_1">%3$d packets, %4$d bytes</xliff:g>"</string> |
| <string name="status_up_time">"正常使用时间"</string> |
| <string name="status_awake_time">"唤醒时间"</string> |
| <string name="internal_memory">"手机内部存储"</string> |
| <string name="sd_memory">"SD 卡"</string> |
| <string name="memory_available">"可用的空间"</string> |
| <string name="memory_size">"空间总量"</string> |
| <string name="sd_eject">"删除 SD 卡"</string> |
| <string name="sd_eject_summary">"删除 SD 卡以安全移除"</string> |
| <string name="sd_format">"格式化 SD 卡"</string> |
| <string name="sd_format_summary">"格式化（清除）SD 卡"</string> |
| <string name="sd_unavailable">"不可用"</string> |
| <string name="read_only">"（只读）"</string> |
| <string name="battery_status_title">"电池状态"</string> |
| <string name="battery_level_title">"电池级别"</string> |
| <string name="apn_settings">"APN"</string> |
| <string name="apn_edit">"编辑接入点"</string> |
| <string name="apn_not_set">"<未设置>"</string> |
| <string name="apn_name">"名称"</string> |
| <string name="apn_apn">"APN"</string> |
| <string name="apn_http_proxy">"代理"</string> |
| <string name="apn_http_port">"端口"</string> |
| <string name="apn_user">"用户名"</string> |
| <string name="apn_password">"密码"</string> |
| <string name="apn_server">"服务器"</string> |
| <string name="apn_mmsc">"MMSC"</string> |
| <string name="apn_mms_proxy">"彩信代理"</string> |
| <string name="apn_mms_port">"彩信端口"</string> |
| <string name="apn_mcc">"MCC"</string> |
| <string name="apn_mnc">"MNC"</string> |
| <string name="apn_type">"APN 类型"</string> |
| <string name="menu_delete">"删除 APN"</string> |
| <string name="menu_new">"新 APN"</string> |
| <string name="menu_save">"保存"</string> |
| <string name="menu_cancel">"放弃"</string> |
| <string name="error_title">"注意"</string> |
| <string name="error_name_empty">"“名称”字段不能为空。"</string> |
| <string name="error_apn_empty">"APN 不能为空。"</string> |
| <string name="error_mcc_not3">"MCC 字段必须为 3 位数。"</string> |
| <string name="error_mnc_not23">"MNC 字段必须为 2 位数或 3 位数。"</string> |
| <string name="master_clear_title">"已重设出厂数据"</string> |
| <string name="master_clear_summary">"清除手机上的所有数据"</string> |
| <string name="master_clear_desc">"此操作会将手机重设为其初始出厂状态，即清除所有数据和下载的应用程序！"</string> |
| <string name="master_clear_button_text">"重设手机"</string> |
| <string name="master_clear_final_desc">"是否要重设手机以清除所有数据和应用程序？该操作无法撤消！"</string> |
| <string name="master_clear_final_button_text">"清除全部内容"</string> |
| <string name="master_clear_gesture_prompt">"绘制解锁图案"</string> |
| <string name="master_clear_gesture_explanation">"您必须绘制解锁图案才能确认手机重设。"</string> |
| <string name="master_clear_failed">"未执行重设，因为 System Clear 服务不可用。"</string> |
| <string name="media_format_title">"格式化 SD 卡。"</string> |
| <string name="media_format_summary">"清除 SD 卡上的所有数据"</string> |
| <string name="media_format_desc">"该操作会清除手机上的 SD 卡。您会丢失卡上的所有数据。"</string> |
| <string name="media_format_button_text">"格式化 SD 卡"</string> |
| <string name="media_format_final_desc">"是否要格式化 SD 卡，以清除所有媒质？该操作不能撤消！"</string> |
| <string name="media_format_final_button_text">"清除所有内容"</string> |
| <string name="media_format_gesture_prompt">"绘制您的解锁图案"</string> |
| <string name="media_format_gesture_explanation">"您必须绘制解锁图案才能确认格式化 SD 卡。"</string> |
| <string name="call_settings_title">"通话设置"</string> |
| <string name="call_settings_summary">"设置语音信箱、呼叫转移、呼叫等待、呼叫者 ID"</string> |
| <string name="network_settings_title">"移动网络"</string> |
| <string name="network_settings_summary">"为漫游、网络、APN 设置选项"</string> |
| <string name="location_title">"我的位置源"</string> |
| <string name="location_network_based">"使用无线网络"</string> |
| <string name="location_networks_disabled">"使用无线网络查看应用程序（例如 Google 地图）中的位置"</string> |
| <string name="location_neighborhood_level">"通过 Wi-Fi 和/或移动网络确定的位置"</string> |
| <string name="location_gps">"启用 GPS 卫星设置"</string> |
| <string name="location_street_level">"定位时，精确到街道级别（取消选择可节约电量）"</string> |
| <string name="location_gps_disabled">"定位到街道级别（需要更多电量来观看天空）"</string> |
| <string name="about_settings">"关于手机"</string> |
| <string name="about_settings_summary">"查看法律信息、手机状态和软件版本"</string> |
| <string name="legal_information">"法律信息"</string> |
| <string name="contributors_title">"赞助商"</string> |
| <string name="copyright_title">"版权"</string> |
| <string name="license_title">"许可"</string> |
| <string name="terms_title">"条款"</string> |
| <string name="settings_license_activity_title">"开源许可"</string> |
| <string name="settings_license_activity_unavailable">"载入许可时出现问题。"</string> |
| <string name="settings_license_activity_loading">"正在载入..."</string> |
| <string name="lock_settings_title">"屏幕解锁图案"</string> |
| <string name="lockpattern_change_lock_pattern_label">"更改解锁图案"</string> |
| <string name="lockpattern_need_to_unlock">"确认保存的图案"</string> |
| <string name="lockpattern_need_to_unlock_wrong">"很抱歉，请重试："</string> |
| <string name="lockpattern_recording_intro_header">"绘制解锁图案"</string> |
| <string name="lockpattern_recording_intro_footer">"按“菜单”获取帮助。"</string> |
| <string name="lockpattern_recording_inprogress">"完成后松开手指。"</string> |
| <string name="lockpattern_recording_incorrect_too_short">"连接至少 <xliff:g id="NUMBER">%d</xliff:g> 个点。请重试："</string> |
| <string name="lockpattern_pattern_entered_header">"图案已记录！"</string> |
| <string name="lockpattern_need_to_confirm">"重新绘制图案以确认："</string> |
| <string name="lockpattern_pattern_confirmed_header">"您的新解锁图案："</string> |
| <string name="lockpattern_confirm_button_text">"确认"</string> |
| <string name="lockpattern_restart_button_text">"重新绘制"</string> |
| <string name="lockpattern_retry_button_text">"重试"</string> |
| <string name="lockpattern_continue_button_text">"继续"</string> |
| <string name="lockpattern_settings_title">"解锁图案"</string> |
| <string name="lockpattern_settings_enable_title">"需要图案"</string> |
| <string name="lockpattern_settings_enable_summary">"必须绘制图案才能解锁屏幕"</string> |
| <string name="lockpattern_settings_enable_visible_pattern_title">"使用可见的图案"</string> |
| <string name="lockpattern_settings_enable_tactile_feedback_title">"使用触觉反馈"</string> |
| <string name="lockpattern_settings_choose_lock_pattern">"设置解锁图案"</string> |
| <string name="lockpattern_settings_change_lock_pattern">"更改解锁图案"</string> |
| <string name="lockpattern_settings_help_how_to_record">"如何绘制解锁图案"</string> |
| <string name="lockpattern_too_many_failed_confirmation_attempts_header">"错误尝试的次数太多！"</string> |
| <string name="lockpattern_too_many_failed_confirmation_attempts_footer">"<xliff:g id="NUMBER">%d</xliff:g> 秒后重试。"</string> |
| <string name="skip_button_label">"取消"</string> |
| <string name="next_button_label">"下一步"</string> |
| <string name="lock_title">"保护您的手机"</string> |
| <string name="lock_intro_message"><font size="17">"通过创建个人屏幕解锁图案来保护您的手机不受未经授权的使用。"\n<font height="17">\n</font><b>"1"</b>" 在下一屏幕上，观看示例图案的绘制。"\n<font height="17">\n</font><b>"2"</b>" 准备就绪后，绘制您自己的个人解锁图案。尝试不同的图案，但至少要连接四个点。"\n<font height="17">\n</font><b>"3"</b>" 重新绘制您的图案以进行确认。"\n<font height="17">\n</font><b>"可以开始了吗？选择“下一步”"</b>"。"\n<font height="3">\n</font>"要让手机处于不受保护的状态，请选择“取消”。"</font></string> |
| <string name="lock_example_title">"示例图案"</string> |
| <string name="lock_example_message">"连接至少四个点。"\n\n"准备好绘制自己的图案后选择“下一步”。"</string> |
| <string name="manageapplications_settings_title">"管理应用程序"</string> |
| <string name="manageapplications_settings_summary">"管理和删除安装的应用程序"</string> |
| <string name="applications_settings">"应用程序"</string> |
| <string name="applications_settings_summary">"管理应用程序，设置快速启动快捷键"</string> |
| <string name="applications_settings_header">"应用程序设置"</string> |
| <string name="install_applications">"未知源"</string> |
| <string name="install_unknown_applications">"允许安装非市场应用程序"</string> |
| <string name="install_all_warning">"您的手机和个人数据很容易受到来自未知源的应用程序的攻击。您同意单方面承担由于使用这些应用程序而可能对您的手机造成的任何损坏或数据丢失的责任。"</string> |
| <string name="application_info_label">"应用程序信息"</string> |
| <string name="storage_label">"存储"</string> |
| <string name="auto_launch_label">"默认情况下启动"</string> |
| <string name="permissions_label">"权限"</string> |
| <string name="cache_header_label">"缓存"</string> |
| <string name="clear_cache_btn_text">"清除缓存"</string> |
| <string name="cache_size_label">"缓存"</string> |
| <string name="controls_label">"控件"</string> |
| <string name="force_stop">"强制停止"</string> |
| <string name="total_size_label">"总量"</string> |
| <string name="application_size_label">"应用程序"</string> |
| <string name="data_size_label">"数据"</string> |
| <string name="uninstall_text">"卸载"</string> |
| <string name="clear_user_data_text">"清除数据"</string> |
| <string name="auto_launch_enable_text">"您已选择默认情况下启动此应用程序以执行某些操作。"</string> |
| <string name="auto_launch_disable_text">"未设置默认值。"</string> |
| <string name="clear_activities">"清除默认值"</string> |
| <string name="unknown">"未知"</string> |
| <string name="sort_order_alpha">"排序"</string> |
| <string name="sort_order_size">"按大小排序"</string> |
| <string name="manage_space_text">"管理空间"</string> |
| <string name="filter">"过滤"</string> |
| <string name="filter_dlg_title">"选择过滤选项"</string> |
| <string name="filter_apps_all">"全部"</string> |
| <string name="filter_apps_third_party">"第三方"</string> |
| <string name="filter_apps_running">"正在运行"</string> |
| <string name="loading">"正在载入..."</string> |
| <string name="recompute_size">"正在重新计算大小..."</string> |
| <string name="clear_data_dlg_title">"删除"</string> |
| <string name="clear_data_dlg_text">"您保存在此应用程序中的所有信息都会永久删除。"</string> |
| <string name="dlg_ok">"确定"</string> |
| <string name="dlg_cancel">"取消"</string> |
| <string name="app_not_found_dlg_title">"未找到应用程序"</string> |
| <string name="app_not_found_dlg_text">"未在已安装的应用程序的列表中找到该应用程序。"</string> |
| <string name="clear_data_failed">"无法清除应用程序数据。"</string> |
| <string name="security_settings_desc">"此应用程序可访问您手机上的以下内容："</string> |
| <string name="computing_size">"正在计算..."</string> |
| <string name="invalid_size_value">"无法计算包大小"</string> |
| <string name="empty_list_msg">"您尚未安装任何第三方应用程序。"</string> |
| <string name="language_settings">"区域和文本"</string> |
| <string name="language_settings_summary">"设置区域（语言和区域）、文本输入和自动纠错选项"</string> |
| <string name="language_category">"区域设置"</string> |
| <string name="text_category">"文本设置"</string> |
| <string name="phone_language">"选择区域"</string> |
| <string name="phone_language_summary">"选择语言和地区"</string> |
| <string name="auto_replace">"自动替换"</string> |
| <string name="auto_replace_summary">"纠正错误键入的词"</string> |
| <string name="auto_caps">"自动大写"</string> |
| <string name="auto_caps_summary">"将句子中的首字母大写"</string> |
| <string name="auto_punctuate">"自动加标点"</string> |
| <string name="hardkeyboard_category">"物理键盘设置"</string> |
| <string name="auto_punctuate_summary">"按两次空格键来插入“。”"</string> |
| <string name="show_password">"可见的密码"</string> |
| <string name="show_password_summary">"键入时显示密码"</string> |
| <string name="user_dict_settings_titlebar">"用户词典"</string> |
| <string name="user_dict_settings_title">"用户词典"</string> |
| <string name="user_dict_settings_summary">"向用户词典中添加字词以及从用户词典中删除字词"</string> |
| <string name="user_dict_settings_add_menu_title">"添加"</string> |
| <string name="user_dict_settings_add_dialog_title">"添加到词典"</string> |
| <string name="user_dict_settings_context_menu_edit_title">"编辑"</string> |
| <string name="user_dict_settings_context_menu_delete_title">"删除"</string> |
| <string name="user_dict_settings_empty_text">"用户词典中没有您定义的字词。您可以通过菜单添加字词。"</string> |
| <string name="testing">"测试"</string> |
| <string name="testing_phone_info">"手机信息"</string> |
| <string name="testing_battery_info">"电池信息"</string> |
| <string name="testing_battery_history">"电池历史记录"</string> |
| <string name="quick_launch_title">"快速启动"</string> |
| <string name="quick_launch_summary">"设置启动应用程序的键盘快捷键"</string> |
| <string name="quick_launch_assign_application">"分配应用程序"</string> |
| <string name="quick_launch_no_shortcut">"无快捷键"</string> |
| <string name="quick_launch_shortcut">"搜索 + <xliff:g id="SHORTCUT_LETTER">%1$s</xliff:g>"</string> |
| <string name="quick_launch_clear_dialog_title">"清除"</string> |
| <string name="quick_launch_clear_dialog_message">"会清除快捷键 <xliff:g id="SHORTCUT_LETTER">%1$s</xliff:g>（<xliff:g id="APPLICATION_NAME">%2$s</xliff:g>）。"</string> |
| <string name="quick_launch_clear_ok_button">"确定"</string> |
| <string name="quick_launch_clear_cancel_button">"取消"</string> |
| <string name="quick_launch_display_mode_applications">"应用程序"</string> |
| <string name="quick_launch_display_mode_shortcuts">"快捷键"</string> |
| <string name="input_methods_settings_title">"文本输入"</string> |
| <string name="input_methods_settings_summary">"管理文本输入选项"</string> |
| <string name="input_methods_settings_label_format">"%s 设置"</string> |
| <string name="development_settings_title">"开发"</string> |
| <string name="development_settings_summary">"设置应用程序开发选项"</string> |
| <string name="enable_adb">"USB 调试"</string> |
| <string name="enable_adb_summary">"连接 USB 后启用调试模式"</string> |
| <string name="keep_screen_on">"保持唤醒状态"</string> |
| <string name="keep_screen_on_summary">"充电时屏幕不会休眠"</string> |
| <string name="allow_mock_location">"允许模仿位置"</string> |
| <string name="allow_mock_location_summary">"允许模仿位置"</string> |
| <string name="gadget_picker_title">"选择小工具"</string> |
| <string name="battery_history_details_for">"有关用户 ID %d 的详情"</string> |
| <string name="battery_history_uid">"用户 ID <xliff:g id="USER_ID">%1$d</xliff:g>"</string> |
| <string name="battery_history_network_usage">"有关<xliff:g id="APP_NAME">%1$s</xliff:g>的网络使用详情："</string> |
| <string name="battery_history_bytes_received">"收到的字节数：<xliff:g id="BYTES">%1$d</xliff:g>"</string> |
| <string name="battery_history_bytes_sent">"发送的字节数：<xliff:g id="BYTES">%1$d</xliff:g>"</string> |
| <string name="battery_history_bytes_total">"总字节数：<xliff:g id="BYTES">%1$d</xliff:g>"</string> |
| <string name="battery_history_cpu_usage">"有关<xliff:g id="APP_NAME">%1$s</xliff:g>的 CPU 使用详情："</string> |
| <string name="battery_history_user_time">"用户时间："</string> |
| <string name="battery_history_system_time">"系统时间："</string> |
| <string name="battery_history_total_time">"合计时间："</string> |
| <string name="battery_history_starts">"启动次数：<xliff:g id="STARTS">%1$d</xliff:g>"</string> |
| <string name="battery_history_days">"<xliff:g id="DAYS">%1$d</xliff:g> 天 <xliff:g id="HOURS">%2$d</xliff:g> 小时 <xliff:g id="MINUTES">%3$d</xliff:g> 分 <xliff:g id="SECONDS">%4$d</xliff:g> 秒"</string> |
| <string name="battery_history_hours">"<xliff:g id="HOURS">%1$d</xliff:g> 小时 <xliff:g id="MINUTES">%2$d</xliff:g> 分 <xliff:g id="SECONDS">%3$d</xliff:g> 秒"</string> |
| <string name="battery_history_minutes">"<xliff:g id="MINUTES">%1$d</xliff:g> 分 <xliff:g id="SECONDS">%2$d</xliff:g> 秒"</string> |
| <string name="battery_history_seconds">"<xliff:g id="SECONDS">%1$d</xliff:g> 秒"</string> |
| <string name="battery_history_packages_sharing_this_uid">"共享该用户 ID 的数据包："</string> |
| <string name="battery_history_no_data">"没有可用的电池使用数据"</string> |
| <string name="battery_history_sensor">"传感器："</string> |
| <string name="battery_history_used_by_packages">"包使用的传感器："</string> |
| <string name="battery_history_sensor_usage">"<xliff:g id="PACKAGE">%2$s</xliff:g>使用了 <xliff:g id="COUNT">%1$d</xliff:g> 次"</string> |
| <string name="battery_history_sensor_usage_multi">"由以下某项使用过 <xliff:g id="COUNT">%1$d</xliff:g> 次："</string> |
| <string name="battery_history_screen_on">"屏幕开启所花费的时间："</string> |
| <string name="battery_history_screen_on_battery">"正在使用电池："</string> |
| <string name="battery_history_screen_on_plugged">"已插入："</string> |
| <string name="usage_stats_label">"使用情况统计"</string> |
| <string name="testing_usage_stats">"使用情况统计数据"</string> |
| <string name="display_order_text">"排序方式："</string> |
| <string name="app_name_label">"应用程序"</string> |
| <string name="launch_count_label">"次数"</string> |
| <string name="usage_time_label">"使用时间"</string> |
| </resources> |