wpa_supplicant_lib_8: update qca-vendor_copy.h
This commit updates qca-vendor_copy.h to latest qca-vendor.h as
specified on 23/06/2023
File : https://w1.fi/cgit/hostap/tree/src/common/qca-vendor.h
Git-commit: 30f5bdc34c6abf5c177144ddf7aeb5bf237c9e41
Change-Id: Id7d6abe18b4145c1f80675442ad9d3394715dd98
CRs-Fixed: 3538854
diff --git a/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h b/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h
index 551fcf5..b776082 100644
--- a/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h
+++ b/qcwcn/wpa_supplicant_8_lib/qca-vendor_copy.h
@@ -64,6 +64,42 @@
* encapsulated inside any attribute. Attribute QCA_WLAN_VENDOR_ATTR_NAN
* is used when receiving vendor events in userspace from the driver.
*
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE: This command is used to enable TDLS
+ * capability or to form a session with the specified peer.
+ * If %NL80211_ATTR_VENDOR_DATA is sent as an empty nested attribute this
+ * indicates to enable TDLS capability on the interface.
+ * If %QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR is nested in
+ * %NL80211_ATTR_VENDOR_DATA this indicates the userspace requests to
+ * form a TDLS session with the specified peer MAC address.
+ * The attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_tdls_enable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE: This command is used to disable TDLS
+ * capability or to terminate the session with the specified peer.
+ * If %NL80211_ATTR_VENDOR_DATA is sent as an empty nested attribute this
+ * indicates to disable TDLS capability on the interface.
+ * If %QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR is nested in
+ * %NL80211_ATTR_VENDOR_DATA this indicates the userspace requests to
+ * terminate TDLS session with the specified peer MAC address.
+ * The attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_tdls_disable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS: This command is to get the TDLS
+ * status at the interface level or with the specific peer.
+ * If %NL80211_ATTR_VENDOR_DATA is sent as an empty nested attribute this
+ * indicates the TDLS status query is at interface level.
+ * If %QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR is nested in
+ * %NL80211_ATTR_VENDOR_DATA this indicates the userspace requests to
+ * get TDLS session status with the specified peer MAC address.
+ * The attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_tdls_get_status.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE: This event is to indicate the result
+ * of the TDLS session request with the peer sent by userspace in
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE.
+ * The attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_tdls_state.
+ *
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
* used to configure PMK to the driver even when not connected. This can
* be used to request offloading of key management operations. Only used
@@ -106,6 +142,32 @@
* @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO: Get information from the driver.
* Attributes defined in enum qca_wlan_vendor_attr_get_wifi_info.
*
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION: This command is used to
+ * configure various wiphy or interface level configurations. Attributes
+ * are defined in enum qca_wlan_vendor_attr_config. Userspace can send one
+ * or more configuration attributes with a single command. The driver
+ * accepts the command only if all the configurations are known, otherwise
+ * it rejects the command. The driver returns success only if processing of
+ * all the configurations succeeds. The driver continues to process all the
+ * configurations even if processing of some configurations failed and
+ * returns the last error occurred while processing the failed
+ * configurations.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION: This command is used to
+ * get the current values of the various wiphy or interface level
+ * configurations. Attributes are defined in enum
+ * qca_wlan_vendor_attr_config. Userspace needs to specify the
+ * configuration attributes for which it wants to get the values in the
+ * command, there is no significance for the value sent in the attribute
+ * unless explicitly specified in the corresponding configuration
+ * attribute documentation. The driver accepts the command only if all the
+ * configurations are known, otherwise it rejects the command. The driver
+ * returns success only if fetching of all configuration values succeeds
+ * and indicates the configuration values in corresponding attributes in
+ * the response. The driver continues to process all the configurations
+ * even if processing of some configurations failed and returns the last
+ * error occurred while processing the failed configurations.
+ *
* @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: Get the feature bitmap
* based on enum wifi_logger_supported_features. Attributes defined in
* enum qca_wlan_vendor_attr_get_logger_features.
@@ -915,6 +977,45 @@
* %NL80211_CMD_GET_SURVEY response.
* CU = %NL80211_SURVEY_INFO_TIME_BUSY * 100 / %NL80211_SURVEY_INFO_TIME.
* This command is only used for STA mode.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TID_TO_LINK_MAP: This vendor subcommand is
+ * used as an event to notify the userspace of TID-to-link map changes
+ * negotiated by the driver or updated by associated AP MLD with Beacon,
+ * Probe Response, or Action frames. The attributes used with this command
+ * are defined in enum qca_wlan_vendor_attr_tid_to_link_map.
+ *
+ * Note that the attribute
+ * %QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AP_MLD_ADDR may not correspond to
+ * the current connected AP MLD address.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_LINK_RECONFIG: Notify userspace about the removal
+ * of STA MLD setup links due to the AP MLD removing the corresponding
+ * affiliated APs with Multi-Link reconfiguration. If all the STA MLD setup
+ * links are removed during Multi-Link reconfiguration, the driver shall
+ * use %NL80211_CMD_DISCONNECT instead of this command since it is a
+ * connection drop. The attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_link_reconfig.
+ * Note that the attribute
+ * %QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AP_MLD_ADDR may not correspond to
+ * the current connected AP MLD address.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_DISC_RSP_EXT: Vendor command to configure
+ * the driver with MLO link id information on which to transmit the TDLS
+ * discovery response frame on the configured MLO BSS link when the
+ * local station is connected in MLO mode. This command is sent to the
+ * driver prior to the TDLS discovery response management transmit
+ * operation and is followed immediately by the TDLS discovery response
+ * management frame transmit command.
+ *
+ * The driver saves the configured MLO link id information and uses it for
+ * the following TDLS discovery response frame transmission on the
+ * configured MLO BSS link and the link id information is cleared in the
+ * driver after the TDLS discovery response frame is successfully
+ * transmitted. This behavior is indepent of the TDLS peer STA connection
+ * mode (MLO or non-MLO).
+ *
+ * Uses the attributes defined in
+ * enum qca_wlan_vendor_attr_tdls_disc_rsp_ext.
*/
enum qca_nl80211_vendor_subcmds {
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -1127,6 +1228,10 @@
QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS = 226,
QCA_NL80211_VENDOR_SUBCMD_MLO_LINK_STATE = 227,
QCA_NL80211_VENDOR_SUBCMD_CONNECTED_CHANNEL_STATS = 228,
+ QCA_NL80211_VENDOR_SUBCMD_TID_TO_LINK_MAP = 229,
+ QCA_NL80211_VENDOR_SUBCMD_LINK_RECONFIG = 230,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_DISC_RSP_EXT = 231,
+ /* 232 - reserved for QCA */
};
/* Compatibility defines for previously used subcmd names.
@@ -1807,6 +1912,8 @@
* @QCA_WLAN_VENDOR_FEATURE_AP_ALLOWED_FREQ_LIST: Flag indicates that the device
* in AP mode supports configuring allowed frequency list for AP operation
* with %QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST.
+ * @QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN: Flag indicates
+ * that the device supports enhanced audio experience over WLAN feature.
* @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
*/
enum qca_wlan_vendor_features {
@@ -1833,6 +1940,7 @@
QCA_WLAN_VENDOR_FEATURE_PROT_RANGE_NEGO_AND_MEASURE_STA = 20,
QCA_WLAN_VENDOR_FEATURE_PROT_RANGE_NEGO_AND_MEASURE_AP = 21,
QCA_WLAN_VENDOR_FEATURE_AP_ALLOWED_FREQ_LIST = 22,
+ QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN = 23,
NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
};
@@ -2646,6 +2754,9 @@
* state, it should not exceed the negotiated channel width. If it is
* configured when STA is in disconnected state, the configured value
* will take effect for the next immediate connection.
+ * This configuration can be sent inside
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINKS to specify the maximum
+ * supported channel width per-MLO link.
*
* This uses values defined in enum nl80211_chan_width.
*/
@@ -2860,6 +2971,9 @@
* 8-bit unsigned value. This attribute can be used to configure the
* data path mode to be followed for audio traffic. Possible values
* are defined in enum qca_wlan_audio_data_path.
+ *
+ * This attribute is used only when the driver advertises support for
+ * QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_AUDIO_DATA_PATH = 82,
@@ -2928,8 +3042,13 @@
QCA_WLAN_VENDOR_ATTR_CONFIG_EHT_MLO_MAX_SIMULTANEOUS_LINKS = 88,
/* 8-bit unsigned value to configure the driver with EHT MLO maximum
- * number of links to be used for MLO connection.
- * The range of the value is 1 to 16.
+ * number of links to be used for MLO connection. Value 0 restores the
+ * default value of the maximum MLO links capability of the device.
+ * The range of the value is 0 to 15.
+ *
+ * 0 - Restore default device limit.
+ * 1 to 15 - Set the maximum number of links to be used for an MLO
+ * connection.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_EHT_MLO_MAX_NUM_LINKS = 89,
@@ -2965,6 +3084,124 @@
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST = 91,
+ /* Nested attribute to indicate EHT MLO links to be forced active.
+ * It contains link MAC address attributes. These nested attributes are
+ * of the type NL80211_ATTR_MAC and are used to force enabling of the
+ * MLO links corresponding to the indicated link MAC addresses.
+ * Subsequently, the links corresponding to the link MAC addresses that
+ * are not indicated are forced inactive.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_EHT_MLO_ACTIVE_LINKS = 92,
+
+ /* 8-bit unsigned value to configure EMLSR mode entry or exit.
+ * Uses enum qca_wlan_emlsr_mode values.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_EMLSR_MODE_SWITCH = 93,
+
+ /* 8-bit unsigned value to configure the channel bandwidth
+ * for CTS frame transmission during the dymamic bandwidth
+ * signaling CTS procedure referred in IEEE Std 802.11-2020,
+ * 10.3.2.9 CTS and DMG CTS procedure.
+ * This configuration is used for testing purposes.
+ *
+ * This uses values defined in enum nl80211_chan_width.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CTS_CHANNEL_WIDTH = 94,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/suspend trigger based UL MU transmission.
+ * This is supported in STA mode and the device sends Operating
+ * Mode Indication to inform the change as described in
+ * IEEE Std 802.11ax-2021, 26.9.
+ *
+ * This attribute can be configured when the STA is associated
+ * to an AP and the configuration is maintained until the current
+ * association terminates.
+ *
+ * By default all UL MU transmissions are enabled.
+ *
+ * Uses enum qca_ul_mu_config values.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_UL_MU_CONFIG = 95,
+
+ /* 8-bit unsigned value. Optionally specified along with
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_WIDTH when STA is in connected
+ * state. This configuration is applicable only for the current
+ * connection. This configuration not allowed in disconnected state.
+ * This configuration can be sent inside
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINKS to specify the maximum
+ * supported channel width update type per-MLO link.
+ *
+ * valid values:
+ * 0 - The maximum allowed bandwidth change is applicable for both Tx
+ * and Rx paths. The driver shall conduct OMI operation as defined
+ * in 26.9 (Operating mode indication) or OMN operation as
+ * defined in 11.40 (Notification of operating mode
+ * changes) in IEEE P802.11-REVme/D2.0 with AP to indicate the
+ * change in the maximum allowed operating bandwidth.
+ * 1 - Limit the change in maximum allowed bandwidth only to Tx path.
+ * In this case the driver doesn't need to conduct OMI/OMN
+ * operation since %QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_WIDTH is
+ * expected to be less than the current connection maximum
+ * negotiated bandwidth.
+ * For example: Negotiated maximum bandwidth is 160 MHz and the new
+ * maximum bandwidth configured is 80 MHz, now the driver limits
+ * the maximum bandwidth to 80 MHz only in the Tx path.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CHAN_WIDTH_UPDATE_TYPE = 96,
+
+ /* 8-bit unsigned value to set EPCS (Emergency Preparedness
+ * Communications Service) feature capability
+ * 1 - Enable, 0 - Disable.
+ *
+ * This configuration is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_EPCS_CAPABILITY = 97,
+
+ /* 8-bit unsigned value to enable/disable EPCS priority access
+ * 1 - Enable, 0 - Disable.
+ * The EPCS priority access shall be enabled only when EPCS feature
+ * capability is also enabled (see
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_EPCS_CAPABILITY).
+ *
+ * This configuration is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_EPCS_FUNCTION = 98,
+
+ /* 8-bit unsigned value. Used only for representing MLO link ID of a
+ * link inside %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINKS.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINK_ID = 99,
+
+ /* Array of nested links each identified by
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINK_ID. This uses values defined in
+ * enum qca_wlan_vendor_attr_config, explicit documentation shall be
+ * added for the attributes in enum qca_wlan_vendor_attr_config to
+ * support per-MLO link configuration through
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINKS.
+ *
+ * Userspace can configure a single link or multiple links with this
+ * attribute by nesting the corresponding configuration attributes and
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINK_ID for each link.
+ *
+ * Userspace can fetch the configuration attribute values for a single
+ * link or multiple links with this attribute by nesting the
+ * corresponding configuration attributes and
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINK_ID for each link.
+ *
+ * For STA interface, this attribute is applicable only in connected
+ * state when the current connection is MLO capable. The valid values of
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINK_ID are the link IDs of the
+ * connected AP MLD links.
+ *
+ * For AP interface, this configuration applicable only after adding
+ * MLO links to the AP interface with %NL80211_CMD_ADD_LINK and the
+ * valid values of %QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINK_ID are the link
+ * IDs specified in %NL80211_CMD_ADD_LINK while adding the MLO links to
+ * the AP interface.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINKS = 100,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
@@ -2980,6 +3217,16 @@
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL
/**
+ * enum qca_ul_mu_config - UL MU configuration
+ * @QCA_UL_MU_SUSPEND - All trigger based UL MU transmission is suspended
+ * @QCA_UL_MU_ENABLE - All trigger based UL MU transmission is enabled
+ */
+enum qca_ul_mu_config {
+ QCA_UL_MU_SUSPEND = 0,
+ QCA_UL_MU_ENABLE = 1,
+};
+
+/**
* enum qca_dbam_config - Specifies DBAM config mode
* @QCA_DBAM_DISABLE: Firmware disables DBAM
* @QCA_DBAM_ENABLE: Firmware enables DBAM opportunistically when
@@ -4047,18 +4294,55 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1,
};
+/**
+ * qca_wlan_ll_stats_clr_req_bitmap - Represents the bitmap to clear LL STATS
+ * values for %QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO: Clear all radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_CCA: Clear cca_busy_time within
+ * radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_CHANNEL: Clear all channel
+ * statistics within radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_SCAN: Clear all scan statistics within
+ * radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE: Clear all interface statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_TXRATE: Clear all TX rate statistics
+ * within interface statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_AC: Clear all AC statistics within
+ * interface statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_CONTENTION: Clear all contention
+ * (min, max, avg) statistics within AC statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_ALL_PEER: Clear all peer statistics
+ * on this interface.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_PER_PEER: Clear particular peer
+ * statistics depending on the peer_mac.
+ */
+enum qca_wlan_ll_stats_clr_req_bitmap {
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO = BIT(0),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_CCA = BIT(1),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_CHANNELS = BIT(2),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_SCAN = BIT(3),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE = BIT(4),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_TXRATE = BIT(5),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_AC = BIT(6),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_CONTENTION = BIT(7),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_ALL_PEER = BIT(8),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_PER_PEER = BIT(9),
+};
+
enum qca_wlan_vendor_attr_ll_stats_clr {
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0,
- /* Unsigned 32bit bitmap for clearing statistics
- * All radio statistics 0x00000001
- * cca_busy_time (within radio statistics) 0x00000002
- * All channel stats (within radio statistics) 0x00000004
- * All scan statistics (within radio statistics) 0x00000008
- * All interface statistics 0x00000010
- * All tx rate statistics (within interface statistics) 0x00000020
- * All ac statistics (with in interface statistics) 0x00000040
- * All contention (min, max, avg) statistics (within ac statisctics)
- * 0x00000080.
+ /* Unsigned 32bit bitmap for clearing statistics, specified
+ * in the enum qca_wlan_ll_stats_clr_req_bitmap.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK = 1,
/* Unsigned 8 bit value: Request to stop statistics collection */
@@ -4078,6 +4362,25 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1,
};
+/**
+ * qca_wlan_ll_stats_get_req_bitmap - Represents the bitmap to request LL STATS
+ * values for %QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK.
+ *
+ * @QCA_WLAN_LL_STATS_GET_REQ_BITMAP_RADIO: Request all radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_GET_REQ_BITMAP_IFACE: Request interface statistics.
+ *
+ * @QCA_WLAN_LL_STATS_GET_REQ_BITMAP_ALL_PEER: Request all peer statistics.
+ *
+ * @QCA_WLAN_LL_STATS_GET_REQ_BITMAP_PER_PEER: Request per peer statistics.
+ */
+enum qca_wlan_ll_stats_get_req_bitmap {
+ QCA_WLAN_LL_STATS_GET_REQ_BITMAP_RADIO = BIT(0),
+ QCA_WLAN_LL_STATS_GET_REQ_BITMAP_IFACE = BIT(1),
+ QCA_WLAN_LL_STATS_GET_REQ_BITMAP_ALL_PEER = BIT(2),
+ QCA_WLAN_LL_STATS_GET_REQ_BITMAP_PER_PEER = BIT(3),
+};
+
enum qca_wlan_vendor_attr_ll_stats_get {
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0,
/* Unsigned 32 bit value provided by the caller issuing the GET stats
@@ -4086,11 +4389,8 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID = 1,
/* Unsigned 32 bit value - bit mask to identify what statistics are
- * requested for retrieval.
- * Radio Statistics 0x00000001
- * Interface Statistics 0x00000020
- * All Peer Statistics 0x00000040
- * Peer Statistics 0x00000080
+ * requested for retrieval specified in the enum
+ * qca_wlan_ll_stats_get_req_bitmap
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK = 2,
/* keep last */
@@ -4101,24 +4401,65 @@
enum qca_wlan_vendor_attr_ll_stats_results {
QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0,
+
+ /*
+ * For Multi Link Operation (MLO) connection, per-link statistics will
+ * be sent inside of %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and
+ * cumulative statistics will be sent outside of
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to maintain backward
+ * compatibility with legacy user space. Attributes which don't have
+ * explicit documentation for MLO will be sent only outside of
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK, such attributes values
+ * don't depend on whether the connection is MLO capable or not, e.g.,
+ * radio and channel specific attributes.
+ */
+
/* Unsigned 32bit value. Used by the driver; must match the request id
* provided with the QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET command.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5,
- /* Signed 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6,
- /* Signed 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7,
- /* Signed 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are
@@ -4142,7 +4483,8 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13,
/* NULL terminated SSID. An array of 33 Unsigned 8bit values */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14,
- /* BSSID. An array of 6 unsigned 8 bit values */
+ /* For non-MLO connection, BSSID of the AP. For MLO connection, MLD
+ * address of the AP. An array of 6 unsigned 8 bit values */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15,
/* Country string advertised by AP. An array of 3 unsigned 8 bit
* values.
@@ -4155,6 +4497,15 @@
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could
* be nested within the interface stats.
+ * For an MLO connection, all %QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_*
+ * attributes except %QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_*
+ * indicate the aggregate of all links outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_* attributes
+ * indicate value of the MLO link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ * These attributes indicate the link specific value inside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
/* Type = enum wifi_traffic_ac, e.g., V0, VI, BE and BK */
@@ -4257,6 +4608,12 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48,
+ /* Unsigned 32 bit value. This is used to indicate radio ID of the radio
+ * statistics when %QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE is
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO. This is also used
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to indicate radio ID
+ * of the MLO link.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49,
/* Unsigned 32 bit value. Total number of msecs the radio is awake
* accruing over time.
@@ -4303,7 +4660,13 @@
/* Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80 */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60,
- /* Unsigned 32 bit value. Primary 20 MHz channel. */
+ /* Unsigned 32 bit value. Primary 20 MHz channel. This is used to
+ * indicate the primary frequency of the channel when
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE is
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO. This is also used inside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to indicate the frequency
+ * on which the MLO link is operating.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61,
/* Unsigned 32 bit value. Center frequency (MHz) first segment. */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62,
@@ -4333,7 +4696,9 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67,
/* Signifies the nested list of peer info attributes
- * QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_*
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_*. For MLO connection,
+ * this also contains %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK_ID to
+ * indicate on which link the peer is connected.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68,
@@ -4354,16 +4719,32 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71,
- /* Unsigned 64 bit value */
+ /* Unsigned 64 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75,
/* Unsigned 32 bit value */
@@ -4376,13 +4757,29 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82,
/* Unsigned int 32 value.
@@ -4406,12 +4803,18 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_LOAD_PERCENTAGE = 86,
/* u8 value representing the time slicing duty cycle percentage.
- * Possible values are 0-100.
+ * Possible values are 0-100. For an MLO connection, indicates the value
+ * of the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_TS_DUTY_CYCLE = 87,
/* Unsigned 32 bit value. The number of Beacon frames which are received
* from the associated AP and indicate buffered unicast frame(s) for us
- * in the TIM element.
+ * in the TIM element. For an MLO connection, indicates the value of the
+ * link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_TIM_BEACON = 88,
/* Unsigned 32 bit value. The total number of Beacon frames received
@@ -4422,16 +4825,46 @@
* doesn’t receive any unicast data after this beacon.
* 2) The related TIM element is still set in the beacon for STA
* after STA has indicated power save exit by QoS Null Data frame.
+ * For an MLO connection, indicates the value of the link with the best
+ * RSSI outside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link
+ * specific value inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_TIM_BEACON_ERR = 89,
- /* Attribute used for padding for 64-bit alignment */
- QCA_WLAN_VENDOR_ATTR_LL_STATS_PAD = 90,
/* Signed 32 bit value. It represents the noise floor calibration value.
- * Possible values are -120~-50 dBm.
+ * Possible values are -120~-50 dBm. For an MLO connection, indicates
+ * the value of the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NF_CAL_VAL = 90,
+ /* Attribute used for padding for 64-bit alignment */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PAD = 91,
+
+ /* Unsigned u8 value, link ID of an MLO link. Used inside nested
+ * attribute %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to represent the
+ * link ID of the MLO link for which the statistics are embedded in the
+ * nested attribute. Used inside nested attribute
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO to represent the connected
+ * link ID of the peer.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK_ID = 92,
+
+ /* A nested array of attributes for each MLO link, each containing
+ * per-link statistics of a multi link connection. The attributes used
+ * inside this nested attribute are defined in enum
+ * qca_wlan_vendor_attr_ll_stats_results.
+ *
+ * For non-MLO connection, this attribute is not present and the
+ * statistics will be sent outside this attribute (without nesting).
+ *
+ * For MLO connection, this attribute is present and also cumulative
+ * statistics of all the links will be sent outside of this attribute
+ * to be compatible with legacy user space.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK = 93,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX =
@@ -4913,6 +5346,8 @@
* @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times
* out.
* @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails.
+ * @QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK: Roam scan did not happen since the
+ * current network conditions are fine.
*/
enum qca_vendor_roam_fail_reasons {
QCA_ROAM_FAIL_REASON_NONE = 0,
@@ -4945,6 +5380,7 @@
QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27,
QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28,
QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29,
+ QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK = 30,
};
/*
@@ -7751,7 +8187,12 @@
enum qca_wlan_tdls_caps_features_supported {
WIFI_TDLS_SUPPORT = (1 << (0)),
WIFI_TDLS_EXTERNAL_CONTROL_SUPPORT = (1 << (1)),
- WIFI_TDLS_OFFCHANNEL_SUPPORT = (1 << (2))
+ WIFI_TDLS_OFFCHANNEL_SUPPORT = (1 << (2)),
+
+ /* Indicates if the TDLS session can be formed with the peer using
+ * higher bandwidth than the bandwidth of the AP path.
+ */
+ WIFI_TDLS_WIDER_BW_SUPPORT = (1 << (3)),
};
/**
@@ -8606,9 +9047,19 @@
};
/**
- * enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for
- * HE operating mode control transmit request. These attributes are
- * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and
+ * enum qca_wlan_emlsr_mode: Enhanced Multi-link Single Radio mode configuration
+ * @QCA_WLAN_EMLSR_MODE_ENTER: Enter EMLSR mode
+ * @QCA_WLAN_EMLSR_MODE_EXIT: Exit EMLSR mode
+ */
+enum qca_wlan_emlsr_mode {
+ QCA_WLAN_EMLSR_MODE_ENTER = 0,
+ QCA_WLAN_EMLSR_MODE_EXIT = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_omi_tx: Represents attributes for HE and
+ * EHT operating mode control transmit request. These attributes are
+ * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX and
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
*
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS: Mandatory 8-bit unsigned value
@@ -8638,21 +9089,48 @@
* 1 - Determine which HE TB PPDU types are allowed by the STA if UL MU disable
* bit is not set, else UL MU Tx is suspended.
*
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_RX_NSS_EXTN: 8-bit unsigned value in the EHT OM
+ * Control subfield combined with the Rx NSS subfield in the OM Control subfield
+ * indicates NSS - 1, where NSS is the maximum number of spatial streams that
+ * STA supports in reception for PPDU bandwidths less than or equal to 80 MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_CH_BW_EXTN: 8-bit unsigned value indicates
+ * 320 MHz operating channel width supported by the EHT STA for both reception
+ * and transmission.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_TX_NSS_EXTN: 8-bit unsigned value in the EHT OM
+ * Control subfield combined with the Tx NSTS subfield in OM Control subfield
+ * indicates NSTS - 1, where NSTS is the maximum number of space-time streams
+ * that the STA supports in transmission for PPDU bandwidths less than or equal
+ * to 80 MHz.
*/
-enum qca_wlan_vendor_attr_he_omi_tx {
+enum qca_wlan_vendor_attr_omi_tx {
QCA_WLAN_VENDOR_ATTR_HE_OMI_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS = 1,
QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW = 2,
QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE = 3,
QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS = 4,
QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE = 5,
+ QCA_WLAN_VENDOR_ATTR_EHT_OMI_RX_NSS_EXTN = 6,
+ QCA_WLAN_VENDOR_ATTR_EHT_OMI_CH_BW_EXTN = 7,
+ QCA_WLAN_VENDOR_ATTR_EHT_OMI_TX_NSS_EXTN = 8,
/* keep last */
- QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST,
- QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX =
- QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1,
+ QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OMI_MAX =
+ QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST - 1,
};
+/* deprecated legacy names */
+#define QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX \
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX
+#define qca_wlan_vendor_attr_he_omi_tx \
+ qca_wlan_vendor_attr_omi_tx
+#define QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST \
+ QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST
+#define QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX \
+ QCA_WLAN_VENDOR_ATTR_OMI_MAX
+
/**
* enum qca_wlan_vendor_phy_mode - Different PHY modes
* These values are used with %QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE.
@@ -8970,10 +9448,10 @@
* channel bandwidth, Tx Nsts and UL MU disable attributes.
* These nested attributes are used to send HE operating mode control
* with configured values.
- * Uses the enum qca_wlan_vendor_attr_he_omi_tx attributes.
+ * Uses the enum qca_wlan_vendor_attr_omi_tx attributes.
* This attribute is used to configure the testbed device.
*/
- QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX = 33,
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX = 33,
/* 8-bit unsigned value to configure +HTC_HE support to indicate the
* support for the reception of a frame that carries an HE variant
@@ -9255,6 +9733,54 @@
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_TB_SOUNDING_FB_RL = 66,
+ /* 8-bit unsigned value to configure the support for receiving an MPDU
+ * that contains an EHT operating mode control subfield.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_OM_CTRL_SUPPORT = 67,
+
+ /* 8-bit unsigned value to configure the driver with EMLSR padding delay
+ * subfield value.
+ *
+ * 0 - 0 us
+ * 1 - 32 us
+ * 2 - 64 us
+ * 3 - 128 us
+ * 4 - 256 us
+ * 5-255 - Reserved
+ *
+ * This attribute is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EMLSR_PADDING_DELAY = 68,
+
+ /*
+ * 8-bit unsigned value to indicate the firmware to force the active MLO
+ * links to power save mode for the configured number of beacon periods.
+ * This allows the firmware to suspend STA links for X beacon periods
+ * and remain asleep even if the AP advertises TIM as opposed to regular
+ * power save mode where STA links wake up if the AP indicates that it
+ * has buffered data to send.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FORCE_MLO_POWER_SAVE_BCN_PERIOD = 69,
+
+ /*
+ * 8-bit unsigned value to indicate the firmware to be in STR MLMR mode
+ * to enable simultaneous transmission of PPDUs on all active links.
+ * 0 - Default behavior
+ * 1 - Enter STR mode for simultaneous data transmission on all links
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_MLO_STR_TX = 70,
+
+ /* Nested attribute to indicate EHT MLO links on which powersave to be
+ * enabled. It contains link ID attributes. These nested attributes are
+ * of the type u8 and are used to enable the powersave on associated
+ * MLO links corresponding to the link IDs provided in the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_MLO_LINK_POWER_SAVE = 71,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
@@ -12242,9 +12768,13 @@
*
* @QCA_WLAN_CONCURRENT_AP_POLICY_GAMING_AUDIO: Select interface concurrencies
* to meet gaming audio latency requirements.
+ * This policy is used only when the driver advertises support for
+ * QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN.
*
* @QCA_WLAN_CONCURRENT_AP_POLICY_LOSSLESS_AUDIO_STREAMING: Select interface
* concurrencies to meet lossless audio streaming requirements.
+ * This policy is used only when the driver advertises support for
+ * QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN.
*
* @QCA_WLAN_CONCURRENT_AP_POLICY_XR: Select interface concurrencies to meet
* XR (eXtended Reality) requirements.
@@ -15165,4 +15695,306 @@
QCA_WLAN_VENDOR_ATTR_LINK_STATE_AFTER_LAST - 1,
};
+/**
+ * enum qca_wlan_vendor_attr_tid_link_map_status - Definition of attributes used
+ * inside nested attribute %QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_UPLINK: Required u16 attribute
+ * within nested attribute %QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS.
+ * Indicates the link mapping bitmap of a TID for uplink traffic. It is a
+ * bitmask of the link IDs in which a bit set means that the TID is mapped with
+ * that link ID in uplink traffic. Otherwise, the TID is not mapped to uplink
+ * traffic for that link.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_DOWNLINK: Required u16 attribute
+ * within nested attribute %QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS.
+ * Indicates the link mapping bitmap of a TID for downlink traffic. It is a
+ * bitmask of the link IDs in which a bit set means that the TID is mapped with
+ * that link ID in downlink traffic. Otherwise, the TID is not mapped to
+ * downlink traffic for that link.
+ */
+enum qca_wlan_vendor_attr_tid_link_map_status {
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_UPLINK = 1,
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_DOWNLINK = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_MAX =
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_AFTER_LAST - 1,
+};
+
+/*
+ * enum qca_wlan_vendor_attr_tid_to_link_map: Definition of attributes used with
+ * %QCA_NL80211_VENDOR_SUBCMD_TID_TO_LINK_MAP event.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AP_MLD_ADDR: Required attribute. 6-byte
+ * AP MLD address with which this TID-to-link negotiation mapping is
+ * established/updated.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS: Optional attribute. Array of
+ * nested attributes containing TID-to-links mapping information. This will have
+ * TID-to-link mapping for TID0 to TID7, each containing the uplink and downlink
+ * map information. If this attribute is not present the default TID-to-link
+ * mapping is in use, i.e., all TIDs are mapped to all links for both uplink and
+ * downlink traffic.
+ * See enum qca_wlan_vendor_attr_tid_link_map_status for the nested attributes.
+ */
+enum qca_wlan_vendor_attr_tid_to_link_map {
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AP_MLD_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_MAX =
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_link_reconfig: Definition of attributes used
+ * with %QCA_NL80211_VENDOR_SUBCMD_LINK_RECONFIG event.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AP_MLD_ADDR: Required attribute.
+ * 6-byte AP MLD address of the AP which indicated the link reconfiguration.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_REMOVED_LINKS: Required u16 attribute.
+ * A bitmap of the removed setup links link IDs.
+ */
+enum qca_wlan_vendor_attr_link_reconfig {
+
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AP_MLD_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_REMOVED_LINKS = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_disc_rsp_ext - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_DISC_RSP_EXT vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_TX_LINK: u8 attribute.
+ * Indicates the MLO link id on which the TDLS discovery response
+ * frame is to be transmitted.
+ */
+enum qca_wlan_vendor_attr_tdls_disc_rsp_ext {
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_TX_LINK = 1,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_tdls_state - Represents the possible TDLS states.
+ *
+ * @QCA_WLAN_VENDOR_TDLS_STATE_DISABLED: TDLS is not enabled, default status
+ * for all stations.
+ *
+ * @QCA_WLAN_VENDOR_TDLS_STATE_ENABLED: TDLS is enabled, but not yet tried to
+ * establish the session.
+ *
+ * @QCA_WLAN_VENDOR_TDLS_STATE_ESTABLISHED: Direct link TDLS session is
+ * established.
+ *
+ * @QCA_WLAN_VENDOR_TDLS_STATE_ESTABLISHED_OFF_CHANNEL: Direct link TDLS
+ * session is established using MCC.
+ *
+ * @QCA_WLAN_VENDOR_TDLS_STATE_DROPPED: Direct link TDLS session was
+ * established, but is temporarily dropped currently.
+ *
+ * @QCA_WLAN_VENDOR_TDLS_STATE_FAILED: TDLS session is failed to establish.
+ */
+enum qca_wlan_vendor_tdls_state {
+ QCA_WLAN_VENDOR_TDLS_STATE_DISABLED = 1,
+ QCA_WLAN_VENDOR_TDLS_STATE_ENABLED = 2,
+ QCA_WLAN_VENDOR_TDLS_STATE_ESTABLISHED = 3,
+ QCA_WLAN_VENDOR_TDLS_STATE_ESTABLISHED_OFF_CHANNEL = 4,
+ QCA_WLAN_VENDOR_TDLS_STATE_DROPPED = 5,
+ QCA_WLAN_VENDOR_TDLS_STATE_FAILED = 6,
+};
+
+/**
+ * enum qca_wlan_vendor_tdls_reason - Represents the possible TDLS reasons.
+ *
+ * @QCA_WLAN_TDLS_REASON_SUCCESS: TDLS session is successfully established.
+ *
+ * @QCA_WLAN_TDLS_REASON_UNSPECIFIED: Unspecified reason.
+ *
+ * @QCA_WLAN_TDLS_REASON_NOT_SUPPORTED: TDLS is not supported.
+ *
+ * @QCA_WLAN_TDLS_REASON_UNSUPPORTED_BAND: The specified band is not supported.
+ *
+ * @QCA_WLAN_TDLS_REASON_NOT_BENEFICIAL: Packets going through AP is better
+ * than through direct link.
+ *
+ * @QCA_WLAN_TDLS_REASON_DROPPED_BY_REMOTE: Peer station doesn't want the TDLS
+ * session anymore.
+ */
+
+enum qca_wlan_vendor_tdls_reason {
+ QCA_WLAN_TDLS_REASON_SUCCESS = 0,
+ QCA_WLAN_TDLS_REASON_UNSPECIFIED = -1,
+ QCA_WLAN_TDLS_REASON_NOT_SUPPORTED = -2,
+ QCA_WLAN_TDLS_REASON_UNSUPPORTED_BAND = -3,
+ QCA_WLAN_TDLS_REASON_NOT_BENEFICIAL = -4,
+ QCA_WLAN_TDLS_REASON_DROPPED_BY_REMOTE = -5,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_enable - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR: 6-byte MAC address of the peer
+ * station to enable the TDLS session. Optional attribute. The driver sends the
+ * TDLS session result as an asynchronous response using the command
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE when this peer MAC is provided in
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_CHANNEL: u32 attribute. Indicates the
+ * channel on which the TDLS session to be established. Required only when
+ * %QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR is present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_GLOBAL_OPERATING_CLASS: u32 attribute.
+ * Indicates the global operating class of the TDLS session to be established.
+ * Required only when %QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR is present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX_LATENCY_MS: u32 attribute. Indicates
+ * the maximum latency of the WLAN packets to be transmitted/received in
+ * milliseconds on TDLS session. Required only when
+ * %QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR is present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MIN_BANDWIDTH_KBPS: u32 attribute.
+ * Indicates the minimum bandwidth to be used to establish the TDLS session
+ * in kbps. Required only when %QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR is
+ * present.
+ */
+enum qca_wlan_vendor_attr_tdls_enable {
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAC_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_CHANNEL = 2,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_GLOBAL_OPERATING_CLASS = 3,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX_LATENCY_MS = 4,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MIN_BANDWIDTH_KBPS = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_ENABLE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_disable - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR: 6-byte MAC address of the peer
+ * station to disable the TDLS session. Optional attribute.
+ */
+enum qca_wlan_vendor_attr_tdls_disable {
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAC_ADDR = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISABLE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_get_status - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR: 6-byte MAC address of the
+ * peer station. Optional attribute. Used in
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS request and response.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE: u32 attribute. Indicates the
+ * TDLS session state with the peer specified in
+ * %QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR. Uses the values from
+ * enum qca_wlan_vendor_tdls_state. Used in
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS response.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_REASON: s32 attribute. Indicates the
+ * reason for the TDLS session state indicated in
+ * %QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE. Uses the values from enum
+ * qca_wlan_vendor_tdls_reason. Used in
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS response.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_CHANNEL: u32 attribute. Indicates the
+ * channel of the TDLS session established with
+ * %QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR. Used in
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS response.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_GLOBAL_OPERATING_CLASS: u32 attribute.
+ * Indicates the global operating class of the TDLS session established with
+ * %QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR. Used in
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS response.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_NUM_SESSIONS: u32 attribute. Indicates
+ * the current number of active TDLS sessions. This is indicated in the response
+ * when %QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS is requested with
+ * %NL80211_ATTR_VENDOR_DATA as an empty nested attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AVAILABLE: Flag attribute. Indicates
+ * whether the driver can initiate new TDLS session. This is indicated in the
+ * response when %QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS is requested with
+ * %NL80211_ATTR_VENDOR_DATA as an empty nested attribute.
+ */
+enum qca_wlan_vendor_attr_tdls_get_status {
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAC_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_STATE = 2,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_REASON = 3,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_CHANNEL = 4,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_GLOBAL_OPERATING_CLASS = 5,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_NUM_SESSIONS = 6,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AVAILABLE = 7,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_STATUS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_state - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAC_ADDR: 6-byte MAC address of the
+ * peer station. Required attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CURRENT_STATE: u32 attribute. Indicates
+ * the current TDLS state. Required attribute. Uses the values from
+ * enum qca_wlan_vendor_tdls_state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_REASON: s32 attribute. Indicates the
+ * reason of the current TDLS session state. Required attribute. Uses the values
+ * from enum qca_wlan_vendor_tdls_reason.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CHANNEL: u32 attribute. Indicates the
+ * TDLS session channel. Required attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_STATE_GLOBAL_OPERATING_CLASS: u32 attribute.
+ * Indicates the TDLS session global operating class. Required attribute.
+ */
+enum qca_wlan_vendor_attr_tdls_state {
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAC_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_NEW_STATE = 2,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_REASON = 3,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_CHANNEL = 4,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_GLOBAL_OPERATING_CLASS = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST - 1,
+};
+
#endif /* QCA_VENDOR_H */