thermal-hal: Add sensor config for MSM8917/QM215
Add temperature sensor config for CPU, GPU, battery and
skin for MSM8917/QM215. These sensors will be used by thermal HAL.
Change-Id: I94453a845cd77ee99c0455327987ade6e889da29
diff --git a/thermal_common.h b/thermal_common.h
index 021924a..c76952e 100644
--- a/thermal_common.h
+++ b/thermal_common.h
@@ -41,6 +41,7 @@
THERM_MSMNILE,
THERM_TALOS,
THERM_SDMMAGPIE,
+ THERM_MSM_8917,
};
struct target_therm_cfg {
diff --git a/thermal_target.c b/thermal_target.c
index 7908013..96d4921 100644
--- a/thermal_target.c
+++ b/thermal_target.c
@@ -71,6 +71,11 @@
{THERM_MSMNILE, 367},
{THERM_TALOS, 355},
{THERM_SDMMAGPIE, 365},
+ {THERM_MSM_8917, 303},
+ {THERM_MSM_8917, 307},
+ {THERM_MSM_8917, 308},
+ {THERM_MSM_8917, 309},
+ {THERM_MSM_8917, 386}, // This SOC ID is for QM215
};
static char *cpu_sensors_talos[] =
@@ -508,6 +513,51 @@
}
};
+static char *cpu_sensors_8917[] =
+{
+ "apc1-cpu0-usr",
+ "apc1-cpu1-usr",
+ "apc1-cpu2-usr",
+ "apc1-cpu3-usr",
+};
+
+static char *misc_sensors_8917[] =
+{
+ "gpu0-usr",
+ "battery",
+ "xo-therm-adc"
+};
+
+static struct target_therm_cfg sensor_cfg_8917[] = {
+ {
+ .type = DEVICE_TEMPERATURE_CPU,
+ .sensor_list = cpu_sensors_8917,
+ .sens_cnt = ARRAY_SIZE(cpu_sensors_8917),
+ .mult = 0.001,
+ },
+ {
+ .type = DEVICE_TEMPERATURE_GPU,
+ .sensor_list = &misc_sensors_8917[0],
+ .sens_cnt = 1,
+ .mult = 0.001,
+ .label = "GPU",
+ },
+ {
+ .type = DEVICE_TEMPERATURE_BATTERY,
+ .sensor_list = &misc_sensors_8917[1],
+ .sens_cnt = 1,
+ .mult = 0.001,
+ .label = "battery",
+ },
+ {
+ .type = DEVICE_TEMPERATURE_SKIN,
+ .sensor_list = &misc_sensors_8917[2],
+ .sens_cnt = 1,
+ .mult = 0.001,
+ .label = "skin",
+ }
+};
+
static int get_soc_info(char *buf)
{
int ret = 0;
@@ -583,6 +633,10 @@
cfg = sensor_cfg_439;
num_cfg = ARRAY_SIZE(sensor_cfg_439);
break;
+ case THERM_MSM_8917:
+ cfg = sensor_cfg_8917;
+ num_cfg = ARRAY_SIZE(sensor_cfg_8917);
+ break;
case THERM_MSMNILE:
cfg = sensor_cfg_msmnile;
num_cfg = ARRAY_SIZE(sensor_cfg_msmnile);