diff --git a/include/hardware/fused_location.h b/include/hardware/fused_location.h
new file mode 100644
index 0000000..f61575d
--- /dev/null
+++ b/include/hardware/fused_location.h
@@ -0,0 +1,664 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_FUSED_LOCATION_H
+#define ANDROID_INCLUDE_HARDWARE_FUSED_LOCATION_H
+
+#include <hardware/hardware.h>
+
+
+/**
+ * This header file defines the interface of the Fused Location Provider.
+ * Fused Location Provider is designed to fuse data from various sources
+ * like GPS, Wifi, Cell, Sensors, Bluetooth etc to provide a fused location to the
+ * upper layers. The advantage of doing fusion in hardware is power savings.
+ * The goal is to do this without waking up the AP to get additional data.
+ * The software implementation of FLP will decide when to use
+ * the hardware fused location. Other location features like geofencing will
+ * also be implemented using fusion in hardware.
+ */
+__BEGIN_DECLS
+
+#define FLP_HEADER_VERSION          1
+#define FLP_MODULE_API_VERSION_0_1  HARDWARE_MODULE_API_VERSION(0, 1)
+#define FLP_DEVICE_API_VERSION_0_1  HARDWARE_DEVICE_API_VERSION_2(0, 1, FLP_HEADER_VERSION)
+
+/**
+ * The id of this module
+ */
+#define FUSED_LOCATION_HARDWARE_MODULE_ID "flp"
+
+/**
+ * Name for the FLP location interface
+ */
+#define FLP_LOCATION_INTERFACE     "flp_location"
+
+/**
+ * Name for the FLP location interface
+ */
+#define FLP_DEBUG_INTERFACE     "flp_debug"
+
+/**
+ * Name for the FLP_Geofencing interface.
+ */
+#define FLP_GEOFENCING_INTERFACE   "flp_geofencing"
+
+/**
+ * Constants to indicate the various subsystems
+ * that will be used.
+ */
+#define FLP_TECH_MASK_GNSS      (1U<<0)
+#define FLP_TECH_MASK_WIFI      (1U<<1)
+#define FLP_TECH_MASK_SENSORS   (1U<<2)
+#define FLP_TECH_MASK_CELL      (1U<<3)
+#define FLP_TECH_MASK_BLUETOOTH (1U<<4)
+
+/**
+ * This constant is used with the batched locations
+ * APIs. Batching is mandatory when FLP implementation
+ * is supported. If the flag is set, the hardware implementation
+ * will wake up the application processor when the FIFO is full,
+ * If the flag is not set, the hardware implementation will drop
+ * the oldest data when the FIFO is full.
+ */
+#define FLP_BATCH_WAKEUP_ON_FIFO_FULL        0x0000001
+
+/**
+ * While batching, the implementation should not call the
+ * flp_location_callback on every location fix. However,
+ * sometimes in high power mode, the system might need
+ * a location callback every single time the location
+ * fix has been obtained. This flag controls that option.
+ * Its the responsibility of the upper layers (caller) to switch
+ * it off, if it knows that the AP might go to sleep.
+ */
+#define FLP_BATCH_CALLBACK_ON_LOCATION_FIX   0x0000002
+
+/** Flags to indicate which values are valid in a FlpLocation. */
+typedef uint16_t FlpLocationFlags;
+
+// IMPORTANT: Note that the following values must match
+// constants in the corresponding java file.
+
+/** FlpLocation has valid latitude and longitude. */
+#define FLP_LOCATION_HAS_LAT_LONG   (1U<<0)
+/** FlpLocation has valid altitude. */
+#define FLP_LOCATION_HAS_ALTITUDE   (1U<<1)
+/** FlpLocation has valid speed. */
+#define FLP_LOCATION_HAS_SPEED      (1U<<2)
+/** FlpLocation has valid bearing. */
+#define FLP_LOCATION_HAS_BEARING    (1U<<4)
+/** FlpLocation has valid accuracy. */
+#define FLP_LOCATION_HAS_ACCURACY   (1U<<8)
+
+
+typedef int64_t FlpUtcTime;
+
+/** Represents a location. */
+typedef struct {
+    /** set to sizeof(FlpLocation) */
+    size_t          size;
+
+    /** Flags associated with the location object. */
+    FlpLocationFlags flags;
+
+    /** Represents latitude in degrees. */
+    double          latitude;
+
+    /** Represents longitude in degrees. */
+    double          longitude;
+
+    /**
+     * Represents altitude in meters above the WGS 84 reference
+     * ellipsoid. */
+    double          altitude;
+
+    /** Represents speed in meters per second. */
+    float           speed;
+
+    /** Represents heading in degrees. */
+    float           bearing;
+
+    /** Represents expected accuracy in meters. */
+    float           accuracy;
+
+    /** Timestamp for the location fix. */
+    FlpUtcTime      timestamp;
+
+    /** Sources used, will be Bitwise OR of the FLP_TECH_MASK bits. */
+    uint32_t         sources_used;
+} FlpLocation;
+
+typedef enum {
+    ASSOCIATE_JVM,
+    DISASSOCIATE_JVM,
+} ThreadEvent;
+
+/**
+ *  Callback with location information.
+ *  Can only be called from a thread created by create_thread_cb.
+ *  Parameters:
+ *     num_locations is the number of batched locations available.
+ *     location is the pointer to an array of pointers to location objects.
+ */
+typedef void (*flp_location_callback)(int32_t num_locations, FlpLocation** location);
+
+/**
+ * Callback utility for acquiring a wakelock.
+ * This can be used to prevent the CPU from suspending while handling FLP events.
+ */
+typedef void (*flp_acquire_wakelock)();
+
+/**
+ * Callback utility for releasing the FLP wakelock.
+ */
+typedef void (*flp_release_wakelock)();
+
+/**
+ * Callback for creating a thread that can call into the Java framework code.
+ * This must be used to create any threads that report events up to the framework.
+ */
+typedef pthread_t (*flp_create_thread)(ThreadEvent event);
+
+/** FLP callback structure. */
+typedef struct {
+    /** set to sizeof(FlpCallbacks) */
+    size_t      size;
+    flp_location_callback location_cb;
+    flp_acquire_wakelock acquire_wakelock_cb;
+    flp_release_wakelock release_wakelock_cb;
+    flp_create_thread create_thread_cb;
+} FlpCallbacks;
+
+
+/** Options with the batching FLP APIs */
+typedef struct {
+    /**
+     * Maximum power in mW that the underlying implementation
+     * can use for this batching call.
+     */
+    double max_power_allocation_mW;
+
+    /** Bitwise OR of the FLP_TECH_MASKS to use */
+    uint32_t sources_to_use;
+
+    /**
+     * FLP_BATCH_WAKEUP_ON_FIFO_FULL - If set the hardware
+     * will wake up the AP when the buffer is full. If not set, the
+     * hardware will drop the oldest location object.
+     *
+     * FLP_BATCH_CALLBACK_ON_LOCATION_FIX - If set the location
+     * callback will be called every time there is a location fix.
+     * Its the responsibility of the upper layers (caller) to switch
+     * it off, if it knows that the AP might go to sleep.
+     *
+     * Other flags to be bitwised ORed in the future.
+     */
+    uint32_t flags;
+
+    /**
+     * Frequency with which location needs to be batched in nano
+     * seconds.
+     */
+    int64_t period_ns;
+} FlpBatchOptions;
+
+#define FLP_RESULT_SUCCESS                       0
+#define FLP_RESULT_ERROR                        -1
+#define FLP_RESULT_INSUFFICIENT_MEMORY          -2
+#define FLP_RESULT_TOO_MANY_GEOFENCES           -3
+#define FLP_RESULT_ID_EXISTS                    -4
+#define FLP_RESULT_ID_UNKNOWN                   -5
+#define FLP_RESULT_INVALID_GEOFENCE_TRANSITION  -6
+
+/**
+ * Represents the standard FLP interface.
+ */
+typedef struct {
+    /**
+     * set to sizeof(FlpLocationInterface)
+     */
+    size_t size;
+
+    /**
+     * Opens the interface and provides the callback routines
+     * to the implemenation of this interface.
+     */
+    int (*init)(FlpCallbacks* callbacks );
+
+    /**
+     * Return the batch size (in bytes) available in the hardware.
+     * This will be used by the upper layer, to decide on the batching
+     * interval and whether the AP should be woken up or not.
+     */
+    int (*get_batch_size)();
+
+    /**
+     * Start batching locations. This API is primarily used when the AP is
+     * asleep and the device can batch locations in the hardware.
+     *   flp_location_callback is used to return the locations. When the buffer
+     * is full and FLP_BATCH_WAKEUP_ON_FIFO_FULL is used, the AP is woken up.
+     * When the buffer is full and FLP_BATCH_WAKEUP_ON_FIFO_FULL is not set,
+     * the oldest location object is dropped. In this case the  AP will not be
+     * woken up. The upper layer will use get_batched_location
+     * API to explicitly ask for the location.
+     *   If FLP_BATCH_CALLBACK_ON_LOCATION_FIX is set, the implementation
+     * will call the flp_location_callback every single time there is a location
+     * fix. This overrides FLP_BATCH_WAKEUP_ON_FIFO_FULL flag setting.
+     * It's the responsibility of the upper layers (caller) to switch
+     * it off, if it knows that the AP might go to sleep. This is useful
+     * for nagivational applications when the system is in high power mode.
+     * Parameters:
+     *    id - Id for the request.
+     *    options - See FlpBatchOptions struct definition.
+     * Return value:
+     *    FLP_RESULT_SUCCESS on success, FLP_RESULT_INSUFFICIENT_MEMORY,
+     *    FLP_RESULT_ID_EXISTS, FLP_RESULT_ERROR on failure.
+     */
+    int (*start_batching)(int id, FlpBatchOptions* options);
+
+    /**
+     * Update FlpBatchOptions associated with a batching request.
+     * When a batching operation is in progress and a batching option
+     * such as FLP_BATCH_WAKEUP_ON_FIFO_FULL needs to be updated, this API
+     * will be used. For instance, this can happen when the AP is awake and
+     * the maps application is being used.
+     * Parameters:
+     *    id - Id of an existing batch request.
+     *    new_options - Updated FlpBatchOptions
+     * Return value:
+     *    FLP_RESULT_SUCCESS on success, FLP_RESULT_ID_UNKNOWN,
+     *    FLP_RESULT_ERROR on error.
+     */
+    int (*update_batching_options)(int id, FlpBatchOptions* new_options);
+
+    /**
+     * Stop batching.
+     * Parameters:
+     *    id - Id for the request.
+     * Return Value:
+     *    FLP_RESULT_SUCCESS on success, FLP_RESULT_ID_UNKNOWN or
+     *    FLP_RESULT_ERROR on failure.
+     */
+    int (*stop_batching)(int id);
+
+    /**
+     * Closes the interface. If any batch operations are in progress,
+     * they should be stopped.
+     */
+    void (*cleanup)();
+
+    /**
+     * Get the fused location that was batched.
+     *   flp_location_callback is used to return the location. The location object
+     * is dropped from the buffer only when the buffer is full. Do not remove it
+     * from the buffer just because it has been returned using the callback.
+     * In other words, when there is no new location object, two calls to
+     * get_batched_location(1) should return the same location object.
+     * Parameters:
+     *      last_n_locations - Number of locations to get. This can be one or many.
+     *      If the last_n_locations is 1, you get the latest location known to the
+     *      hardware.
+     */
+    void (*get_batched_location)(int last_n_locations);
+
+    /**
+     * Injects current location from another location provider
+     * latitude and longitude are measured in degrees
+     * expected accuracy is measured in meters
+     * Parameters:
+     *      location - The location object being injected.
+     * Return value: FLP_RESULT_SUCCESS or FLP_RESULT_ERROR.
+     */
+    int  (*inject_location)(FlpLocation* location);
+
+    /**
+     * Get a pointer to extension information.
+     */
+    const void* (*get_extension)(const char* name);
+} FlpLocationInterface;
+
+struct flp_device_t {
+    struct hw_device_t common;
+
+    /**
+     * Get a handle to the FLP Interface.
+     */
+    const FlpLocationInterface* (*get_flp_interface)(struct flp_device_t* dev);
+};
+
+/**
+ * FLP debug callback structure.
+ * Currently, not used - but this for future extension.
+ */
+typedef struct {
+    /** set to sizeof(FlpDebugCallbacks) */
+    size_t      size;
+    flp_create_thread create_thread_cb;
+} FlpDebugCallbacks;
+
+/** Extended interface for debug support. */
+typedef struct {
+    /** set to sizeof(FlpDebugInterface) */
+    size_t          size;
+
+    /**
+     * Opens the debug interface and provides the callback routines
+     * to the implemenation of this interface.
+     */
+    void  (*init)(FlpDebugCallbacks* callbacks);
+
+    /**
+     * Injects debug data into the FLP subsystem.
+     * Return 0 on success, -1 on error.
+     **/
+    int  (*inject_debug_data)(char* data, int length );
+} FlpDebugInterface;
+
+
+/**
+ * There are 3 states associated with a Geofence: Inside, Outside, Unknown.
+ * There are 3 transitions: ENTERED, EXITED, UNCERTAIN.
+ *
+ * An example state diagram with confidence level: 95% and Unknown time limit
+ * set as 30 secs is shown below. (confidence level and Unknown time limit are
+ * explained latter)
+ *                         ____________________________
+ *                        |       Unknown (30 secs)   |
+ *                         """"""""""""""""""""""""""""
+ *                            ^ |                  |  ^
+ *                   UNCERTAIN| |ENTERED     EXITED|  |UNCERTAIN
+ *                            | v                  v  |
+ *                        ________    EXITED     _________
+ *                       | Inside | -----------> | Outside |
+ *                       |        | <----------- |         |
+ *                        """"""""    ENTERED    """""""""
+ *
+ * Inside state: We are 95% confident that the user is inside the geofence.
+ * Outside state: We are 95% confident that the user is outside the geofence
+ * Unknown state: Rest of the time.
+ *
+ * The Unknown state is better explained with an example:
+ *
+ *                            __________
+ *                           |         c|
+ *                           |  ___     |    _______
+ *                           |  |a|     |   |   b   |
+ *                           |  """     |    """""""
+ *                           |          |
+ *                            """"""""""
+ * In the diagram above, "a" and "b" are 2 geofences and "c" is the accuracy
+ * circle reported by the FLP subsystem. Now with regard to "b", the system is
+ * confident that the user is outside. But with regard to "a" is not confident
+ * whether it is inside or outside the geofence. If the accuracy remains the
+ * same for a sufficient period of time, the UNCERTAIN transition would be
+ * triggered with the state set to Unknown. If the accuracy improves later, an
+ * appropriate transition should be triggered.  This "sufficient period of time"
+ * is defined by the parameter in the add_geofence_area API.
+ *     In other words, Unknown state can be interpreted as a state in which the
+ * FLP subsystem isn't confident enough that the user is either inside or
+ * outside the Geofence. It moves to Unknown state only after the expiry of the
+ * timeout.
+ *
+ * The geofence callback needs to be triggered for the ENTERED and EXITED
+ * transitions, when the FLP system is confident that the user has entered
+ * (Inside state) or exited (Outside state) the Geofence. An implementation
+ * which uses a value of 95% as the confidence is recommended. The callback
+ * should be triggered only for the transitions requested by the
+ * add_geofence_area call.
+ *
+ * Even though the diagram and explanation talks about states and transitions,
+ * the callee is only interested in the transistions. The states are mentioned
+ * here for illustrative purposes.
+ *
+ * Startup Scenario: When the device boots up, if an application adds geofences,
+ * and then we get an accurate FLP location fix, it needs to trigger the
+ * appropriate (ENTERED or EXITED) transition for every Geofence it knows about.
+ * By default, all the Geofences will be in the Unknown state.
+ *
+ * When the FLP system is unavailable, flp_geofence_status_callback should be
+ * called to inform the upper layers of the same. Similarly, when it becomes
+ * available the callback should be called. This is a global state while the
+ * UNKNOWN transition described above is per geofence.
+ *
+ */
+#define FLP_GEOFENCE_TRANSITION_ENTERED     (1L<<0)
+#define FLP_GEOFENCE_TRANSITION_EXITED      (1L<<1)
+#define FLP_GEOFENCE_TRANSITION_UNCERTAIN   (1L<<2)
+
+#define FLP_GEOFENCE_MONITOR_STATUS_UNAVAILABLE (1L<<0)
+#define FLP_GEOFENCE_MONITOR_STATUS_AVAILABLE   (1L<<1)
+
+/**
+ * The callback associated with the geofence.
+ * Parameters:
+ *      geofence_id - The id associated with the add_geofence_area.
+ *      location    - The current location as determined by the FLP subsystem.
+ *      transition  - Can be one of FLP_GEOFENCE_TRANSITION_ENTERED, FLP_GEOFENCE_TRANSITION_EXITED,
+ *                    FLP_GEOFENCE_TRANSITION_UNCERTAIN.
+ *      timestamp   - Timestamp when the transition was detected.
+ *      sources_used - Bitwise OR of FLP_TECH_MASK flags indicating which
+ *                     subsystems were used.
+ *
+ * The callback should only be called when the caller is interested in that
+ * particular transition. For instance, if the caller is interested only in
+ * ENTERED transition, then the callback should NOT be called with the EXITED
+ * transition.
+ *
+ * IMPORTANT: If a transition is triggered resulting in this callback, the
+ * subsystem will wake up the application processor, if its in suspend state.
+ */
+typedef void (*flp_geofence_transition_callback) (int32_t geofence_id,  FlpLocation* location,
+        int32_t transition, FlpUtcTime timestamp, uint32_t sources_used);
+
+/**
+ * The callback associated with the availablity of one the sources used for geofence
+ * monitoring by the FLP sub-system For example, if the GPS system determines that it cannot
+ * monitor geofences because of lack of reliability or unavailability of the GPS signals,
+ * it will call this callback with FLP_GEOFENCE_MONITOR_STATUS_UNAVAILABLE parameter and the
+ * source set to FLP_TECH_MASK_GNSS.
+ *
+ * Parameters:
+ *  status - FLP_GEOFENCE_MONITOR_STATUS_UNAVAILABLE or FLP_GEOFENCE_MONITOR_STATUS_AVAILABLE.
+ *  source - One of the FLP_TECH_MASKS
+ *  last_location - Last known location.
+ */
+typedef void (*flp_geofence_monitor_status_callback) (int32_t status, uint32_t source,
+                                                      FlpLocation* last_location);
+
+/**
+ * The callback associated with the add_geofence call.
+ *
+ * Parameter:
+ * geofence_id - Id of the geofence.
+ * result - FLP_RESULT_SUCCESS
+ *          FLP_RESULT_ERROR_TOO_MANY_GEOFENCES  - geofence limit has been reached.
+ *          FLP_RESULT_ID_EXISTS  - geofence with id already exists
+ *          FLP_RESULT_INVALID_GEOFENCE_TRANSITION - the monitorTransition contains an
+ *              invalid transition
+ *          FLP_RESULT_ERROR - for other errors.
+ */
+typedef void (*flp_geofence_add_callback) (int32_t geofence_id, int32_t result);
+
+/**
+ * The callback associated with the remove_geofence call.
+ *
+ * Parameter:
+ * geofence_id - Id of the geofence.
+ * result - FLP_RESULT_SUCCESS
+ *          FLP_RESULT_ID_UNKNOWN - for invalid id
+ *          FLP_RESULT_ERROR for others.
+ */
+typedef void (*flp_geofence_remove_callback) (int32_t geofence_id, int32_t result);
+
+
+/**
+ * The callback associated with the pause_geofence call.
+ *
+ * Parameter:
+ * geofence_id - Id of the geofence.
+ * result - FLP_RESULT_SUCCESS
+ *          FLP_RESULT__ID_UNKNOWN - for invalid id
+ *          FLP_RESULT_INVALID_TRANSITION -
+ *                    when monitor_transitions is invalid
+ *          FLP_RESULT_ERROR for others.
+ */
+typedef void (*flp_geofence_pause_callback) (int32_t geofence_id, int32_t result);
+
+/**
+ * The callback associated with the resume_geofence call.
+ *
+ * Parameter:
+ * geofence_id - Id of the geofence.
+ * result - FLP_RESULT_SUCCESS
+ *          FLP_RESULT_ID_UNKNOWN - for invalid id
+ *          FLP_RESULT_ERROR for others.
+ */
+typedef void (*flp_geofence_resume_callback) (int32_t geofence_id, int32_t result);
+
+typedef struct {
+    flp_geofence_transition_callback geofence_transition_callback;
+    flp_geofence_monitor_status_callback geofence_status_callback;
+    flp_geofence_add_callback geofence_add_callback;
+    flp_geofence_remove_callback geofence_remove_callback;
+    flp_geofence_pause_callback geofence_pause_callback;
+    flp_geofence_resume_callback geofence_resume_callback;
+    flp_create_thread create_thread_cb;
+} FlpGeofenceCallbacks;
+
+
+/** Type of geofence */
+typedef enum {
+    TYPE_CIRCLE = 0,
+} GeofenceType;
+
+/** Circular geofence is represented by lat / long / radius */
+typedef struct {
+    double latitude;
+    double longitude;
+    double radius_m;
+} GeofenceCircle;
+
+/** Represents the type of geofence and data */
+typedef struct {
+    GeofenceType type;
+    union {
+        GeofenceCircle circle;
+    } geofence;
+} GeofenceData;
+
+/** Geofence Options */
+typedef struct {
+   /**
+    * The current state of the geofence. For example, if
+    * the system already knows that the user is inside the geofence,
+    * this will be set to FLP_GEOFENCE_TRANSITION_ENTERED. In most cases, it
+    * will be FLP_GEOFENCE_TRANSITION_UNCERTAIN. */
+    int last_transition;
+
+   /**
+    * Transitions to monitor. Bitwise OR of
+    * FLP_GEOFENCE_TRANSITION_ENTERED, FLP_GEOFENCE_TRANSITION_EXITED and
+    * FLP_GEOFENCE_TRANSITION_UNCERTAIN.
+    */
+    int monitor_transitions;
+
+   /**
+    * Defines the best-effort description
+    * of how soon should the callback be called when the transition
+    * associated with the Geofence is triggered. For instance, if set
+    * to 1000 millseconds with FLP_GEOFENCE_TRANSITION_ENTERED, the callback
+    * should be called 1000 milliseconds within entering the geofence.
+    * This parameter is defined in milliseconds.
+    * NOTE: This is not to be confused with the rate that the GPS is
+    * polled at. It is acceptable to dynamically vary the rate of
+    * sampling the GPS for power-saving reasons; thus the rate of
+    * sampling may be faster or slower than this.
+    */
+    int notification_responsivenes_ms;
+
+   /**
+    * The time limit after which the UNCERTAIN transition
+    * should be triggered. This paramter is defined in milliseconds.
+    */
+    int unknown_timer_ms;
+
+    /**
+     * The sources to use for monitoring geofences. Its a BITWISE-OR
+     * of FLP_TECH_MASK flags.
+     */
+    uint32_t sources_to_use;
+} GeofenceOptions;
+
+/** Geofence struct */
+typedef struct {
+    int32_t geofence_id;
+    GeofenceData* data;
+    GeofenceOptions* options;
+} Geofence;
+
+/** Extended interface for FLP_Geofencing support */
+typedef struct {
+   /** set to sizeof(FlpGeofencingInterface) */
+   size_t          size;
+
+   /**
+    * Opens the geofence interface and provides the callback routines
+    * to the implemenation of this interface.
+    */
+   void  (*init)( FlpGeofenceCallbacks* callbacks );
+
+   /**
+    * Add a list of geofences.
+    * Parameters:
+    *     number_of_geofences - The number of geofences that needed to be added.
+    *     geofences - Pointer to array of pointers to Geofence structure.
+    */
+   void (*add_geofences) (int32_t number_of_geofences, Geofence** geofences);
+
+   /**
+    * Pause monitoring a particular geofence.
+    * Parameters:
+    *   geofence_id - The id for the geofence.
+    */
+   void (*pause_geofence) (int32_t geofence_id);
+
+   /**
+    * Resume monitoring a particular geofence.
+    * Parameters:
+    *   geofence_id - The id for the geofence.
+    *   monitor_transitions - Which transitions to monitor. Bitwise OR of
+    *       FLP_GEOFENCE_TRANSITION_ENTERED, FLP_GEOFENCE_TRANSITION_EXITED and
+    *       FLP_GEOFENCE_TRANSITION_UNCERTAIN.
+    *       This supersedes the value associated provided in the
+    *       add_geofence_area call.
+    */
+   void (*resume_geofence) (int32_t geofence_id, int monitor_transitions);
+
+   /**
+    * Remove a list of geofences. After the function returns, no notifications
+    * should be sent.
+    * Parameter:
+    *     number_of_geofences - The number of geofences that needed to be added.
+    *     geofence_id - Pointer to array of geofence_ids to be removed.
+    */
+   void (*remove_geofences) (int32_t number_of_geofences, int32_t* geofence_id);
+} FlpGeofencingInterface;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_HARDWARE_FLP_H */
+