diff --git a/Android.bp b/Android.bp
index 6baab68..904380e 100644
--- a/Android.bp
+++ b/Android.bp
@@ -36,13 +36,11 @@
         "libaudio_system_headers",
         "libsystem_headers",
         "libcutils_headers",
-        "libbluetooth-types-header",
     ],
     export_header_lib_headers: [
         "libaudio_system_headers",
         "libsystem_headers",
         "libcutils_headers",
-        "libbluetooth-types-header",
     ],
 
     export_include_dirs: ["include"],
@@ -54,7 +52,6 @@
         recovery: {
             exclude_header_libs: [
                 "libaudio_system_headers",
-                "libbluetooth-types-header",
             ],
         },
         windows: {
@@ -63,7 +60,6 @@
     },
     apex_available: [
         "//apex_available:platform",
-        "com.android.btservices",
         "com.android.media",
         "com.android.media.swcodec",
     ],
diff --git a/include/hardware/bluetooth.h b/include/hardware/bluetooth.h
deleted file mode 100644
index 95a0b6e..0000000
--- a/include/hardware/bluetooth.h
+++ /dev/null
@@ -1,598 +0,0 @@
-/*
- * Copyright (C) 2012 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_INCLUDE_BLUETOOTH_H
-#define ANDROID_INCLUDE_BLUETOOTH_H
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <bluetooth/uuid.h>
-#include <raw_address.h>
-
-__BEGIN_DECLS
-
-#define BLUETOOTH_INTERFACE_STRING "bluetoothInterface"
-
-/** Bluetooth profile interface IDs */
-
-#define BT_PROFILE_HANDSFREE_ID "handsfree"
-#define BT_PROFILE_HANDSFREE_CLIENT_ID "handsfree_client"
-#define BT_PROFILE_ADVANCED_AUDIO_ID "a2dp"
-#define BT_PROFILE_ADVANCED_AUDIO_SINK_ID "a2dp_sink"
-#define BT_PROFILE_HEALTH_ID "health"
-#define BT_PROFILE_SOCKETS_ID "socket"
-#define BT_PROFILE_HIDHOST_ID "hidhost"
-#define BT_PROFILE_HIDDEV_ID "hiddev"
-#define BT_PROFILE_PAN_ID "pan"
-#define BT_PROFILE_MAP_CLIENT_ID "map_client"
-#define BT_PROFILE_SDP_CLIENT_ID "sdp"
-#define BT_PROFILE_GATT_ID "gatt"
-#define BT_PROFILE_AV_RC_ID "avrcp"
-#define BT_PROFILE_AV_RC_CTRL_ID "avrcp_ctrl"
-
-/** Bluetooth test interface IDs */
-#define BT_TEST_INTERFACE_MCAP_ID "mcap_test"
-
-/** Bluetooth Device Name */
-typedef struct {
-    uint8_t name[249];
-} __attribute__((packed))bt_bdname_t;
-
-/** Bluetooth Adapter Visibility Modes*/
-typedef enum {
-    BT_SCAN_MODE_NONE,
-    BT_SCAN_MODE_CONNECTABLE,
-    BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE
-} bt_scan_mode_t;
-
-/** Bluetooth Adapter State */
-typedef enum {
-    BT_STATE_OFF,
-    BT_STATE_ON
-}   bt_state_t;
-
-/** Bluetooth Error Status */
-/** We need to build on this */
-
-typedef enum {
-    BT_STATUS_SUCCESS,
-    BT_STATUS_FAIL,
-    BT_STATUS_NOT_READY,
-    BT_STATUS_NOMEM,
-    BT_STATUS_BUSY,
-    BT_STATUS_DONE,        /* request already completed */
-    BT_STATUS_UNSUPPORTED,
-    BT_STATUS_PARM_INVALID,
-    BT_STATUS_UNHANDLED,
-    BT_STATUS_AUTH_FAILURE,
-    BT_STATUS_RMT_DEV_DOWN,
-    BT_STATUS_AUTH_REJECTED,
-    BT_STATUS_JNI_ENVIRONMENT_ERROR,
-    BT_STATUS_JNI_THREAD_ATTACH_ERROR,
-    BT_STATUS_WAKELOCK_ERROR
-} bt_status_t;
-
-/** Bluetooth PinKey Code */
-typedef struct {
-    uint8_t pin[16];
-} __attribute__((packed))bt_pin_code_t;
-
-typedef struct {
-    uint8_t status;
-    uint8_t ctrl_state;     /* stack reported state */
-    uint64_t tx_time;       /* in ms */
-    uint64_t rx_time;       /* in ms */
-    uint64_t idle_time;     /* in ms */
-    uint64_t energy_used;   /* a product of mA, V and ms */
-} __attribute__((packed))bt_activity_energy_info;
-
-typedef struct {
-    int32_t app_uid;
-    uint64_t tx_bytes;
-    uint64_t rx_bytes;
-} __attribute__((packed))bt_uid_traffic_t;
-
-/** Bluetooth Adapter Discovery state */
-typedef enum {
-    BT_DISCOVERY_STOPPED,
-    BT_DISCOVERY_STARTED
-} bt_discovery_state_t;
-
-/** Bluetooth ACL connection state */
-typedef enum {
-    BT_ACL_STATE_CONNECTED,
-    BT_ACL_STATE_DISCONNECTED
-} bt_acl_state_t;
-
-/** Bluetooth SDP service record */
-typedef struct
-{
-   bluetooth::Uuid uuid;
-   uint16_t channel;
-   char name[256]; // what's the maximum length
-} bt_service_record_t;
-
-
-/** Bluetooth Remote Version info */
-typedef struct
-{
-   int version;
-   int sub_ver;
-   int manufacturer;
-} bt_remote_version_t;
-
-typedef struct
-{
-    uint16_t version_supported;
-    uint8_t local_privacy_enabled;
-    uint8_t max_adv_instance;
-    uint8_t rpa_offload_supported;
-    uint8_t max_irk_list_size;
-    uint8_t max_adv_filter_supported;
-    uint8_t activity_energy_info_supported;
-    uint16_t scan_result_storage_size;
-    uint16_t total_trackable_advertisers;
-    bool extended_scan_support;
-    bool debug_logging_supported;
-    bool le_2m_phy_supported;
-    bool le_coded_phy_supported;
-    bool le_extended_advertising_supported;
-    bool le_periodic_advertising_supported;
-    uint16_t le_maximum_advertising_data_length;
-}bt_local_le_features_t;
-
-/* Bluetooth Adapter and Remote Device property types */
-typedef enum {
-  /* Properties common to both adapter and remote device */
-  /**
-   * Description - Bluetooth Device Name
-   * Access mode - Adapter name can be GET/SET. Remote device can be GET
-   * Data type   - bt_bdname_t
-   */
-  BT_PROPERTY_BDNAME = 0x1,
-  /**
-   * Description - Bluetooth Device Address
-   * Access mode - Only GET.
-   * Data type   - RawAddress
-   */
-  BT_PROPERTY_BDADDR,
-  /**
-   * Description - Bluetooth Service 128-bit UUIDs
-   * Access mode - Only GET.
-   * Data type   - Array of bluetooth::Uuid (Array size inferred from property
-   *               length).
-   */
-  BT_PROPERTY_UUIDS,
-  /**
-   * Description - Bluetooth Class of Device as found in Assigned Numbers
-   * Access mode - Only GET.
-   * Data type   - uint32_t.
-   */
-  BT_PROPERTY_CLASS_OF_DEVICE,
-  /**
-   * Description - Device Type - BREDR, BLE or DUAL Mode
-   * Access mode - Only GET.
-   * Data type   - bt_device_type_t
-   */
-  BT_PROPERTY_TYPE_OF_DEVICE,
-  /**
-   * Description - Bluetooth Service Record
-   * Access mode - Only GET.
-   * Data type   - bt_service_record_t
-   */
-  BT_PROPERTY_SERVICE_RECORD,
-
-  /* Properties unique to adapter */
-  /**
-   * Description - Bluetooth Adapter scan mode
-   * Access mode - GET and SET
-   * Data type   - bt_scan_mode_t.
-   */
-  BT_PROPERTY_ADAPTER_SCAN_MODE,
-  /**
-   * Description - List of bonded devices
-   * Access mode - Only GET.
-   * Data type   - Array of RawAddress of the bonded remote devices
-   *               (Array size inferred from property length).
-   */
-  BT_PROPERTY_ADAPTER_BONDED_DEVICES,
-  /**
-   * Description - Bluetooth Adapter Discovery timeout (in seconds)
-   * Access mode - GET and SET
-   * Data type   - uint32_t
-   */
-  BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT,
-
-  /* Properties unique to remote device */
-  /**
-   * Description - User defined friendly name of the remote device
-   * Access mode - GET and SET
-   * Data type   - bt_bdname_t.
-   */
-  BT_PROPERTY_REMOTE_FRIENDLY_NAME,
-  /**
-   * Description - RSSI value of the inquired remote device
-   * Access mode - Only GET.
-   * Data type   - int32_t.
-   */
-  BT_PROPERTY_REMOTE_RSSI,
-  /**
-   * Description - Remote version info
-   * Access mode - SET/GET.
-   * Data type   - bt_remote_version_t.
-   */
-
-  BT_PROPERTY_REMOTE_VERSION_INFO,
-
-  /**
-   * Description - Local LE features
-   * Access mode - GET.
-   * Data type   - bt_local_le_features_t.
-   */
-  BT_PROPERTY_LOCAL_LE_FEATURES,
-
-  BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP = 0xFF,
-} bt_property_type_t;
-
-/** Bluetooth Adapter Property data structure */
-typedef struct
-{
-    bt_property_type_t type;
-    int len;
-    void *val;
-} bt_property_t;
-
-/** Represents the actual Out of Band data itself */
-typedef struct {
-    // Both
-    bool is_valid = false; /* Default to invalid data; force caller to verify */
-    uint8_t address[7]; /* Bluetooth Device Address (6) plus Address Type (1) */
-    uint8_t c[16];      /* Simple Pairing Hash C-192/256 (Classic or LE) */
-    uint8_t r[16];      /* Simple Pairing Randomizer R-192/256 (Classic or LE) */
-    uint8_t device_name[256]; /* Name of the device */
-
-    // Classic
-    uint8_t oob_data_length[2]; /* Classic only data Length. Value includes this
-                                   in length */
-    uint8_t class_of_device[2]; /* Class of Device (Classic or LE) */
-
-    // LE
-    uint8_t le_device_role;   /* Supported and preferred role of device */
-    uint8_t sm_tk[16];        /* Security Manager TK Value (LE Only) */
-    uint8_t le_flags;         /* LE Flags for discoverability and features */
-    uint8_t le_appearance[2]; /* For the appearance of the device */
-} bt_oob_data_t;
-
-
-/** Bluetooth Device Type */
-typedef enum {
-    BT_DEVICE_DEVTYPE_BREDR = 0x1,
-    BT_DEVICE_DEVTYPE_BLE,
-    BT_DEVICE_DEVTYPE_DUAL
-} bt_device_type_t;
-/** Bluetooth Bond state */
-typedef enum {
-    BT_BOND_STATE_NONE,
-    BT_BOND_STATE_BONDING,
-    BT_BOND_STATE_BONDED
-} bt_bond_state_t;
-
-/** Bluetooth SSP Bonding Variant */
-typedef enum {
-    BT_SSP_VARIANT_PASSKEY_CONFIRMATION,
-    BT_SSP_VARIANT_PASSKEY_ENTRY,
-    BT_SSP_VARIANT_CONSENT,
-    BT_SSP_VARIANT_PASSKEY_NOTIFICATION
-} bt_ssp_variant_t;
-
-#define BT_MAX_NUM_UUIDS 32
-
-/** Bluetooth Interface callbacks */
-
-/** Bluetooth Enable/Disable Callback. */
-typedef void (*adapter_state_changed_callback)(bt_state_t state);
-
-/** GET/SET Adapter Properties callback */
-/* TODO: For the GET/SET property APIs/callbacks, we may need a session
- * identifier to associate the call with the callback. This would be needed
- * whenever more than one simultaneous instance of the same adapter_type
- * is get/set.
- *
- * If this is going to be handled in the Java framework, then we do not need
- * to manage sessions here.
- */
-typedef void (*adapter_properties_callback)(bt_status_t status,
-                                               int num_properties,
-                                               bt_property_t *properties);
-
-/** GET/SET Remote Device Properties callback */
-/** TODO: For remote device properties, do not see a need to get/set
- * multiple properties - num_properties shall be 1
- */
-typedef void (*remote_device_properties_callback)(bt_status_t status,
-                                                       RawAddress *bd_addr,
-                                                       int num_properties,
-                                                       bt_property_t *properties);
-
-/** New device discovered callback */
-/** If EIR data is not present, then BD_NAME and RSSI shall be NULL and -1
- * respectively */
-typedef void (*device_found_callback)(int num_properties,
-                                         bt_property_t *properties);
-
-/** Discovery state changed callback */
-typedef void (*discovery_state_changed_callback)(bt_discovery_state_t state);
-
-/** Bluetooth Legacy PinKey Request callback */
-typedef void (*pin_request_callback)(RawAddress *remote_bd_addr,
-                                        bt_bdname_t *bd_name, uint32_t cod, bool min_16_digit);
-
-/** Bluetooth SSP Request callback - Just Works & Numeric Comparison*/
-/** pass_key - Shall be 0 for BT_SSP_PAIRING_VARIANT_CONSENT &
- *  BT_SSP_PAIRING_PASSKEY_ENTRY */
-/* TODO: Passkey request callback shall not be needed for devices with display
- * capability. We still need support this in the stack for completeness */
-typedef void (*ssp_request_callback)(RawAddress *remote_bd_addr,
-                                        bt_bdname_t *bd_name,
-                                        uint32_t cod,
-                                        bt_ssp_variant_t pairing_variant,
-                                     uint32_t pass_key);
-
-/** Bluetooth Bond state changed callback */
-/* Invoked in response to create_bond, cancel_bond or remove_bond */
-typedef void (*bond_state_changed_callback)(bt_status_t status,
-                                               RawAddress *remote_bd_addr,
-                                               bt_bond_state_t state);
-
-/** Bluetooth ACL connection state changed callback */
-typedef void (*acl_state_changed_callback)(bt_status_t status, RawAddress *remote_bd_addr,
-                                            bt_acl_state_t state);
-
-typedef enum {
-    ASSOCIATE_JVM,
-    DISASSOCIATE_JVM
-} bt_cb_thread_evt;
-
-/** Thread Associate/Disassociate JVM Callback */
-/* Callback that is invoked by the callback thread to allow upper layer to attach/detach to/from
- * the JVM */
-typedef void (*callback_thread_event)(bt_cb_thread_evt evt);
-
-/** Bluetooth Test Mode Callback */
-/* Receive any HCI event from controller. Must be in DUT Mode for this callback to be received */
-typedef void (*dut_mode_recv_callback)(uint16_t opcode, uint8_t *buf, uint8_t len);
-
-/* LE Test mode callbacks
-* This callback shall be invoked whenever the le_tx_test, le_rx_test or le_test_end is invoked
-* The num_packets is valid only for le_test_end command */
-typedef void (*le_test_mode_callback)(bt_status_t status, uint16_t num_packets);
-
-/** Callback invoked when energy details are obtained */
-/* Ctrl_state-Current controller state-Active-1,scan-2,or idle-3 state as defined by HCI spec.
- * If the ctrl_state value is 0, it means the API call failed
- * Time values-In milliseconds as returned by the controller
- * Energy used-Value as returned by the controller
- * Status-Provides the status of the read_energy_info API call
- * uid_data provides an array of bt_uid_traffic_t, where the array is terminated by an element with
- * app_uid set to -1.
- */
-typedef void (*energy_info_callback)(bt_activity_energy_info *energy_info,
-                                     bt_uid_traffic_t *uid_data);
-
-/** TODO: Add callbacks for Link Up/Down and other generic
-  *  notifications/callbacks */
-
-/** Bluetooth DM callback structure. */
-typedef struct {
-    /** set to sizeof(bt_callbacks_t) */
-    size_t size;
-    adapter_state_changed_callback adapter_state_changed_cb;
-    adapter_properties_callback adapter_properties_cb;
-    remote_device_properties_callback remote_device_properties_cb;
-    device_found_callback device_found_cb;
-    discovery_state_changed_callback discovery_state_changed_cb;
-    pin_request_callback pin_request_cb;
-    ssp_request_callback ssp_request_cb;
-    bond_state_changed_callback bond_state_changed_cb;
-    acl_state_changed_callback acl_state_changed_cb;
-    callback_thread_event thread_evt_cb;
-    dut_mode_recv_callback dut_mode_recv_cb;
-    le_test_mode_callback le_test_mode_cb;
-    energy_info_callback energy_info_cb;
-} bt_callbacks_t;
-
-typedef void (*alarm_cb)(void *data);
-typedef bool (*set_wake_alarm_callout)(uint64_t delay_millis, bool should_wake, alarm_cb cb, void *data);
-typedef int (*acquire_wake_lock_callout)(const char *lock_name);
-typedef int (*release_wake_lock_callout)(const char *lock_name);
-
-/** The set of functions required by bluedroid to set wake alarms and
-  * grab wake locks. This struct is passed into the stack through the
-  * |set_os_callouts| function on |bt_interface_t|.
-  */
-typedef struct {
-  /* set to sizeof(bt_os_callouts_t) */
-  size_t size;
-
-  set_wake_alarm_callout set_wake_alarm;
-  acquire_wake_lock_callout acquire_wake_lock;
-  release_wake_lock_callout release_wake_lock;
-} bt_os_callouts_t;
-
-/** NOTE: By default, no profiles are initialized at the time of init/enable.
- *  Whenever the application invokes the 'init' API of a profile, then one of
- *  the following shall occur:
- *
- *    1.) If Bluetooth is not enabled, then the Bluetooth core shall mark the
- *        profile as enabled. Subsequently, when the application invokes the
- *        Bluetooth 'enable', as part of the enable sequence the profile that were
- *        marked shall be enabled by calling appropriate stack APIs. The
- *        'adapter_properties_cb' shall return the list of UUIDs of the
- *        enabled profiles.
- *
- *    2.) If Bluetooth is enabled, then the Bluetooth core shall invoke the stack
- *        profile API to initialize the profile and trigger a
- *        'adapter_properties_cb' with the current list of UUIDs including the
- *        newly added profile's UUID.
- *
- *   The reverse shall occur whenever the profile 'cleanup' APIs are invoked
- */
-
-/** Represents the standard Bluetooth DM interface. */
-typedef struct {
-    /** set to sizeof(bt_interface_t) */
-    size_t size;
-    /**
-     * Opens the interface and provides the callback routines
-     * to the implemenation of this interface.
-     * The |is_atv| flag indicates whether the local device is an Android TV
-     */
-    int (*init)(bt_callbacks_t* callbacks, bool is_atv);
-
-    /** Enable Bluetooth. */
-    int (*enable)(bool guest_mode);
-
-    /** Disable Bluetooth. */
-    int (*disable)(void);
-
-    /** Closes the interface. */
-    void (*cleanup)(void);
-
-    /** Get all Bluetooth Adapter properties at init */
-    int (*get_adapter_properties)(void);
-
-    /** Get Bluetooth Adapter property of 'type' */
-    int (*get_adapter_property)(bt_property_type_t type);
-
-    /** Set Bluetooth Adapter property of 'type' */
-    /* Based on the type, val shall be one of
-     * RawAddress or bt_bdname_t or bt_scanmode_t etc
-     */
-    int (*set_adapter_property)(const bt_property_t *property);
-
-    /** Get all Remote Device properties */
-    int (*get_remote_device_properties)(RawAddress *remote_addr);
-
-    /** Get Remote Device property of 'type' */
-    int (*get_remote_device_property)(RawAddress *remote_addr,
-                                      bt_property_type_t type);
-
-    /** Set Remote Device property of 'type' */
-    int (*set_remote_device_property)(RawAddress *remote_addr,
-                                      const bt_property_t *property);
-
-    /** Get Remote Device's service record  for the given UUID */
-    int (*get_remote_service_record)(const RawAddress& remote_addr,
-                                     const bluetooth::Uuid& uuid);
-
-    /** Start SDP to get remote services */
-    int (*get_remote_services)(RawAddress *remote_addr);
-
-    /** Start Discovery */
-    int (*start_discovery)(void);
-
-    /** Cancel Discovery */
-    int (*cancel_discovery)(void);
-
-    /** Create Bluetooth Bonding */
-    int (*create_bond)(const RawAddress *bd_addr, int transport);
-
-    /** Create Bluetooth Bond using out of band data */
-    int (*create_bond_out_of_band)(const RawAddress *bd_addr, int transport,
-                                   const bt_oob_data_t *p192_data,
-                                   const bt_oob_data_t *p256_data);
-
-    /** Remove Bond */
-    int (*remove_bond)(const RawAddress *bd_addr);
-
-    /** Cancel Bond */
-    int (*cancel_bond)(const RawAddress *bd_addr);
-
-    /**
-     * Get the connection status for a given remote device.
-     * return value of 0 means the device is not connected,
-     * non-zero return status indicates an active connection.
-     */
-    int (*get_connection_state)(const RawAddress *bd_addr);
-
-    /** BT Legacy PinKey Reply */
-    /** If accept==FALSE, then pin_len and pin_code shall be 0x0 */
-    int (*pin_reply)(const RawAddress *bd_addr, uint8_t accept,
-                     uint8_t pin_len, bt_pin_code_t *pin_code);
-
-    /** BT SSP Reply - Just Works, Numeric Comparison and Passkey
-     * passkey shall be zero for BT_SSP_VARIANT_PASSKEY_COMPARISON &
-     * BT_SSP_VARIANT_CONSENT
-     * For BT_SSP_VARIANT_PASSKEY_ENTRY, if accept==FALSE, then passkey
-     * shall be zero */
-    int (*ssp_reply)(const RawAddress *bd_addr, bt_ssp_variant_t variant,
-                     uint8_t accept, uint32_t passkey);
-
-    /** Get Bluetooth profile interface */
-    const void* (*get_profile_interface) (const char *profile_id);
-
-    /** Bluetooth Test Mode APIs - Bluetooth must be enabled for these APIs */
-    /* Configure DUT Mode - Use this mode to enter/exit DUT mode */
-    int (*dut_mode_configure)(uint8_t enable);
-
-    /* Send any test HCI (vendor-specific) command to the controller. Must be in DUT Mode */
-    int (*dut_mode_send)(uint16_t opcode, uint8_t *buf, uint8_t len);
-    /** BLE Test Mode APIs */
-    /* opcode MUST be one of: LE_Receiver_Test, LE_Transmitter_Test, LE_Test_End */
-    int (*le_test_mode)(uint16_t opcode, uint8_t *buf, uint8_t len);
-
-    /** Sets the OS call-out functions that bluedroid needs for alarms and wake locks.
-      * This should be called immediately after a successful |init|.
-      */
-    int (*set_os_callouts)(bt_os_callouts_t *callouts);
-
-    /** Read Energy info details - return value indicates BT_STATUS_SUCCESS or BT_STATUS_NOT_READY
-      * Success indicates that the VSC command was sent to controller
-      */
-    int (*read_energy_info)();
-
-    /**
-     * Native support for dumpsys function
-     * Function is synchronous and |fd| is owned by caller.
-     * |arguments| are arguments which may affect the output, encoded as
-     * UTF-8 strings.
-     */
-    void (*dump)(int fd, const char **arguments);
-
-    /**
-     * Clear /data/misc/bt_config.conf and erase all stored connections
-     */
-    int (*config_clear)(void);
-
-    /**
-     * Clear (reset) the dynamic portion of the device interoperability database.
-     */
-    void (*interop_database_clear)(void);
-
-    /**
-     * Add a new device interoperability workaround for a remote device whose
-     * first |len| bytes of the its device address match |addr|.
-     * NOTE: |feature| has to match an item defined in interop_feature_t (interop.h).
-     */
-    void (*interop_database_add)(uint16_t feature, const RawAddress *addr, size_t len);
-} bt_interface_t;
-
-__END_DECLS
-
-#endif /* ANDROID_INCLUDE_BLUETOOTH_H */