| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_SENSOR_SERVICE_H |
| #define ANDROID_SENSOR_SERVICE_H |
| |
| #include "SensorList.h" |
| #include "RecentEventLogger.h" |
| |
| #include <android-base/macros.h> |
| #include <binder/AppOpsManager.h> |
| #include <binder/BinderService.h> |
| #include <binder/IUidObserver.h> |
| #include <cutils/compiler.h> |
| #include <cutils/multiuser.h> |
| #include <private/android_filesystem_config.h> |
| #include <sensor/ISensorServer.h> |
| #include <sensor/ISensorEventConnection.h> |
| #include <sensor/Sensor.h> |
| #include "android/hardware/BnSensorPrivacyListener.h" |
| |
| #include <utils/AndroidThreads.h> |
| #include <utils/KeyedVector.h> |
| #include <utils/Looper.h> |
| #include <utils/SortedVector.h> |
| #include <utils/String8.h> |
| #include <utils/Vector.h> |
| #include <utils/threads.h> |
| |
| #include <stdint.h> |
| #include <sys/types.h> |
| #include <condition_variable> |
| #include <mutex> |
| #include <queue> |
| #include <unordered_map> |
| #include <unordered_set> |
| #include <vector> |
| |
| #if __clang__ |
| // Clang warns about SensorEventConnection::dump hiding BBinder::dump. The cause isn't fixable |
| // without changing the API, so let's tell clang this is indeed intentional. |
| #pragma clang diagnostic ignored "-Woverloaded-virtual" |
| #endif |
| |
| // --------------------------------------------------------------------------- |
| #define IGNORE_HARDWARE_FUSION false |
| #define DEBUG_CONNECTIONS false |
| // Max size is 100 KB which is enough to accept a batch of about 1000 events. |
| #define MAX_SOCKET_BUFFER_SIZE_BATCHED (100 * 1024) |
| // For older HALs which don't support batching, use a smaller socket buffer size. |
| #define SOCKET_BUFFER_SIZE_NON_BATCHED (4 * 1024) |
| |
| #define SENSOR_REGISTRATIONS_BUF_SIZE 500 |
| |
| // Apps that targets S+ and do not have HIGH_SAMPLING_RATE_SENSORS permission will be capped |
| // at 200 Hz. The cap also applies to all requests when the mic toggle is flipped to on, regardless |
| // of their target SDKs and permission. |
| // Capped sampling periods for apps that have non-direct sensor connections. |
| #define SENSOR_SERVICE_CAPPED_SAMPLING_PERIOD_NS (5 * 1000 * 1000) |
| // Capped sampling rate level for apps that have direct sensor connections. |
| // The enum SENSOR_DIRECT_RATE_NORMAL corresponds to a rate value of at most 110 Hz. |
| #define SENSOR_SERVICE_CAPPED_SAMPLING_RATE_LEVEL SENSOR_DIRECT_RATE_NORMAL |
| |
| namespace android { |
| // --------------------------------------------------------------------------- |
| class SensorInterface; |
| |
| class SensorService : |
| public BinderService<SensorService>, |
| public BnSensorServer, |
| protected Thread |
| { |
| // nested class/struct for internal use |
| class SensorEventConnection; |
| class SensorDirectConnection; |
| |
| public: |
| enum UidState { |
| UID_STATE_ACTIVE = 0, |
| UID_STATE_IDLE, |
| }; |
| |
| enum Mode { |
| // The regular operating mode where any application can register/unregister/call flush on |
| // sensors. |
| NORMAL = 0, |
| // This mode is only used for testing purposes. Not all HALs support this mode. In this mode, |
| // the HAL ignores the sensor data provided by physical sensors and accepts the data that is |
| // injected from the SensorService as if it were the real sensor data. This mode is primarily |
| // used for testing various algorithms like vendor provided SensorFusion, Step Counter and |
| // Step Detector etc. Typically in this mode, there will be a client (a |
| // SensorEventConnection) which will be injecting sensor data into the HAL. Normal apps can |
| // unregister and register for any sensor that supports injection. Registering to sensors |
| // that do not support injection will give an error. |
| DATA_INJECTION = 1, |
| // This mode is used only for testing sensors. Each sensor can be tested in isolation with |
| // the required sampling_rate and maxReportLatency parameters without having to think about |
| // the data rates requested by other applications. End user devices are always expected to be |
| // in NORMAL mode. When this mode is first activated, all active sensors from all connections |
| // are disabled. Calling flush() will return an error. In this mode, only the requests from |
| // selected apps whose package names are allowlisted are allowed (typically CTS apps). Only |
| // these apps can register/unregister/call flush() on sensors. If SensorService switches to |
| // NORMAL mode again, all sensors that were previously registered to are activated with the |
| // corresponding parameters if the application hasn't unregistered for sensors in the mean |
| // time. NOTE: Non allowlisted app whose sensors were previously deactivated may still |
| // receive events if a allowlisted app requests data from the same sensor. |
| RESTRICTED = 2, |
| // Mostly equivalent to DATA_INJECTION with the difference being that the injected data is |
| // delivered to all requesting apps rather than just the package allowed to inject data. |
| // This mode is only allowed to be used on development builds. |
| REPLAY_DATA_INJECTION = 3, |
| // Like REPLAY_DATA_INJECTION but injected data is not sent into the HAL. It is stored in a |
| // buffer in SensorDevice and played back to SensorService when SensorDevice::poll() is |
| // called. This is useful for playing back sensor data on the platform without relying on |
| // the HAL to support data injection. |
| HAL_BYPASS_REPLAY_DATA_INJECTION = 4, |
| |
| // State Transitions supported. |
| // RESTRICTED <--- NORMAL ---> DATA_INJECTION/REPLAY_DATA_INJECTION |
| // ---> <--- |
| |
| // Shell commands to switch modes in SensorService. |
| // 1) Put SensorService in RESTRICTED mode with packageName .cts. If it is already in |
| // restricted mode it is treated as a NO_OP (and packageName is NOT changed). |
| // |
| // $ adb shell dumpsys sensorservice restrict .cts. |
| // |
| // 2) Put SensorService in DATA_INJECTION mode with packageName .xts. If it is already in |
| // data_injection mode it is treated as a NO_OP (and packageName is NOT changed). |
| // |
| // $ adb shell dumpsys sensorservice data_injection .xts. |
| // |
| // 3) Reset sensorservice back to NORMAL mode. |
| // $ adb shell dumpsys sensorservice enable |
| }; |
| |
| class ProximityActiveListener : public virtual RefBase { |
| public: |
| // Note that the callback is invoked from an async thread and can interact with the |
| // SensorService directly. |
| virtual void onProximityActive(bool isActive) = 0; |
| }; |
| |
| class RuntimeSensorCallback : public virtual RefBase { |
| public: |
| // Note that the callback is invoked from an async thread and can interact with the |
| // SensorService directly. |
| virtual status_t onConfigurationChanged(int handle, bool enabled, |
| int64_t samplingPeriodNanos, |
| int64_t batchReportLatencyNanos) = 0; |
| virtual int onDirectChannelCreated(int fd) = 0; |
| virtual void onDirectChannelDestroyed(int channelHandle) = 0; |
| virtual int onDirectChannelConfigured(int channelHandle, int sensorHandle, |
| int rateLevel) = 0; |
| }; |
| |
| static char const* getServiceName() ANDROID_API { return "sensorservice"; } |
| SensorService() ANDROID_API; |
| |
| void cleanupConnection(SensorEventConnection* connection); |
| void cleanupConnection(SensorDirectConnection* c); |
| |
| // Call with mLock held. |
| void checkAndReportProxStateChangeLocked(); |
| void notifyProximityStateLocked(const bool isActive, |
| const std::vector<sp<ProximityActiveListener>>& listeners); |
| |
| status_t enable(const sp<SensorEventConnection>& connection, int handle, |
| nsecs_t samplingPeriodNs, nsecs_t maxBatchReportLatencyNs, int reservedFlags, |
| const String16& opPackageName); |
| |
| status_t disable(const sp<SensorEventConnection>& connection, int handle); |
| |
| status_t setEventRate(const sp<SensorEventConnection>& connection, int handle, nsecs_t ns, |
| const String16& opPackageName); |
| |
| status_t flushSensor(const sp<SensorEventConnection>& connection, |
| const String16& opPackageName); |
| |
| status_t addProximityActiveListener(const sp<ProximityActiveListener>& callback) ANDROID_API; |
| status_t removeProximityActiveListener(const sp<ProximityActiveListener>& callback) ANDROID_API; |
| |
| int registerRuntimeSensor(const sensor_t& sensor, int deviceId, |
| sp<RuntimeSensorCallback> callback) ANDROID_API; |
| status_t unregisterRuntimeSensor(int handle) ANDROID_API; |
| status_t sendRuntimeSensorEvent(const sensors_event_t& event) ANDROID_API; |
| |
| int configureRuntimeSensorDirectChannel(int sensorHandle, const SensorDirectConnection* c, |
| const sensors_direct_cfg_t* config); |
| |
| // Returns true if a sensor should be throttled according to our rate-throttling rules. |
| static bool isSensorInCappedSet(int sensorType); |
| |
| virtual status_t shellCommand(int in, int out, int err, Vector<String16>& args); |
| |
| private: |
| friend class BinderService<SensorService>; |
| |
| // nested class/struct for internal use |
| class ConnectionSafeAutolock; |
| class SensorConnectionHolder; |
| class SensorEventAckReceiver; |
| class SensorRecord; |
| class SensorRegistrationInfo; |
| class RuntimeSensorHandler; |
| |
| // Promoting a SensorEventConnection or SensorDirectConnection from wp to sp must be done with |
| // mLock held, but destroying that sp must be done unlocked to avoid a race condition that |
| // causes a deadlock (remote dies while we hold a local sp, then our decStrong() call invokes |
| // the dtor -> cleanupConnection() tries to re-lock the mutex). This class ensures safe usage |
| // by wrapping a Mutex::Autolock on SensorService's mLock, plus vectors that hold promoted sp<> |
| // references until the lock is released, when they are safely destroyed. |
| // All read accesses to the connection lists in mConnectionHolder must be done via this class. |
| class ConnectionSafeAutolock final { |
| public: |
| // Returns a list of non-null promoted connection references |
| const std::vector<sp<SensorEventConnection>>& getActiveConnections(); |
| const std::vector<sp<SensorDirectConnection>>& getDirectConnections(); |
| |
| private: |
| // Constructed via SensorConnectionHolder::lock() |
| friend class SensorConnectionHolder; |
| explicit ConnectionSafeAutolock(SensorConnectionHolder& holder, Mutex& mutex); |
| DISALLOW_IMPLICIT_CONSTRUCTORS(ConnectionSafeAutolock); |
| |
| // NOTE: Order of these members is important, as the destructor for non-static members |
| // get invoked in the reverse order of their declaration. Here we are relying on the |
| // Autolock to be destroyed *before* the vectors, so the sp<> objects are destroyed without |
| // the lock held, which avoids the deadlock. |
| SensorConnectionHolder& mConnectionHolder; |
| std::vector<std::vector<sp<SensorEventConnection>>> mReferencedActiveConnections; |
| std::vector<std::vector<sp<SensorDirectConnection>>> mReferencedDirectConnections; |
| Mutex::Autolock mAutolock; |
| |
| template<typename ConnectionType> |
| const std::vector<sp<ConnectionType>>& getConnectionsHelper( |
| const SortedVector<wp<ConnectionType>>& connectionList, |
| std::vector<std::vector<sp<ConnectionType>>>* referenceHolder); |
| }; |
| |
| // Encapsulates the collection of active SensorEventConection and SensorDirectConnection |
| // references. Write access is done through this class with mLock held, but all read access |
| // must be routed through ConnectionSafeAutolock. |
| class SensorConnectionHolder { |
| public: |
| void addEventConnectionIfNotPresent(const sp<SensorEventConnection>& connection); |
| void removeEventConnection(const wp<SensorEventConnection>& connection); |
| |
| void addDirectConnection(const sp<SensorDirectConnection>& connection); |
| void removeDirectConnection(const wp<SensorDirectConnection>& connection); |
| |
| // Pass in the mutex that protects this connection holder; acquires the lock and returns an |
| // object that can be used to safely read the lists of connections |
| ConnectionSafeAutolock lock(Mutex& mutex); |
| |
| private: |
| friend class ConnectionSafeAutolock; |
| SortedVector< wp<SensorEventConnection> > mActiveConnections; |
| SortedVector< wp<SensorDirectConnection> > mDirectConnections; |
| }; |
| |
| class RuntimeSensorHandler : public Thread { |
| sp<SensorService> const mService; |
| public: |
| virtual bool threadLoop(); |
| explicit RuntimeSensorHandler(const sp<SensorService>& service) : mService(service) { |
| } |
| }; |
| |
| // If accessing a sensor we need to make sure the UID has access to it. If |
| // the app UID is idle then it cannot access sensors and gets no trigger |
| // events, no on-change events, flush event behavior does not change, and |
| // recurring events are the same as the first one delivered in idle state |
| // emulating no sensor change. As soon as the app UID transitions to an |
| // active state we will start reporting events as usual and vise versa. This |
| // approach transparently handles observing sensors while the app UID transitions |
| // between idle/active state avoiding to get stuck in a state receiving sensor |
| // data while idle or not receiving sensor data while active. |
| class UidPolicy : public BnUidObserver { |
| public: |
| explicit UidPolicy(wp<SensorService> service) |
| : mService(service) {} |
| void registerSelf(); |
| void unregisterSelf(); |
| |
| bool isUidActive(uid_t uid); |
| |
| void onUidGone(uid_t uid, bool disabled) override; |
| void onUidActive(uid_t uid) override; |
| void onUidIdle(uid_t uid, bool disabled) override; |
| void onUidStateChanged(uid_t uid __unused, int32_t procState __unused, |
| int64_t procStateSeq __unused, |
| int32_t capability __unused) override {} |
| void onUidProcAdjChanged(uid_t uid __unused, int32_t adj __unused) override {} |
| |
| void addOverrideUid(uid_t uid, bool active); |
| void removeOverrideUid(uid_t uid); |
| private: |
| bool isUidActiveLocked(uid_t uid); |
| void updateOverrideUid(uid_t uid, bool active, bool insert); |
| |
| Mutex mUidLock; |
| wp<SensorService> mService; |
| std::unordered_set<uid_t> mActiveUids; |
| std::unordered_map<uid_t, bool> mOverrideUids; |
| }; |
| |
| bool isUidActive(uid_t uid); |
| |
| // Sensor privacy allows a user to disable access to all sensors on the device. When |
| // enabled sensor privacy will prevent all apps, including active apps, from accessing |
| // sensors, they will not receive trigger nor on-change events, flush event behavior |
| // does not change, and recurring events are the same as the first one delivered when |
| // sensor privacy was enabled. All sensor direct connections will be stopped as well |
| // and new direct connections will not be allowed while sensor privacy is enabled. |
| // Once sensor privacy is disabled access to sensors will be restored for active |
| // apps, previously stopped direct connections will be restarted, and new direct |
| // connections will be allowed again. |
| class SensorPrivacyPolicy : public hardware::BnSensorPrivacyListener { |
| public: |
| explicit SensorPrivacyPolicy(wp<SensorService> service) |
| : mService(service) {} |
| void registerSelf(); |
| void unregisterSelf(); |
| |
| bool isSensorPrivacyEnabled(); |
| |
| binder::Status onSensorPrivacyChanged(int toggleType, int sensor, |
| bool enabled); |
| |
| protected: |
| std::atomic_bool mSensorPrivacyEnabled; |
| wp<SensorService> mService; |
| |
| private: |
| Mutex mSensorPrivacyLock; |
| }; |
| |
| class MicrophonePrivacyPolicy : public SensorPrivacyPolicy { |
| public: |
| explicit MicrophonePrivacyPolicy(wp<SensorService> service) |
| : SensorPrivacyPolicy(service) {} |
| void registerSelf(); |
| void unregisterSelf(); |
| |
| binder::Status onSensorPrivacyChanged(int toggleType, int sensor, |
| bool enabled); |
| }; |
| |
| // A class automatically clearing and restoring binder caller identity inside |
| // a code block (scoped variable). |
| // Declare one systematically before calling SensorPrivacyManager methods so that they are |
| // executed with the same level of privilege as the SensorService process. |
| class AutoCallerClear { |
| public: |
| AutoCallerClear() : |
| mToken(IPCThreadState::self()->clearCallingIdentity()) {} |
| ~AutoCallerClear() { |
| IPCThreadState::self()->restoreCallingIdentity(mToken); |
| } |
| |
| private: |
| const int64_t mToken; |
| }; |
| |
| static const char* WAKE_LOCK_NAME; |
| virtual ~SensorService(); |
| |
| virtual void onFirstRef(); |
| |
| // Thread interface |
| virtual bool threadLoop(); |
| |
| void processRuntimeSensorEvents(); |
| |
| // ISensorServer interface |
| virtual Vector<Sensor> getSensorList(const String16& opPackageName); |
| virtual Vector<Sensor> getDynamicSensorList(const String16& opPackageName); |
| virtual Vector<Sensor> getRuntimeSensorList(const String16& opPackageName, int deviceId); |
| virtual sp<ISensorEventConnection> createSensorEventConnection( |
| const String8& packageName, |
| int requestedMode, const String16& opPackageName, const String16& attributionTag); |
| virtual int isDataInjectionEnabled(); |
| virtual int isReplayDataInjectionEnabled(); |
| virtual int isHalBypassReplayDataInjectionEnabled(); |
| virtual sp<ISensorEventConnection> createSensorDirectConnection(const String16& opPackageName, |
| int deviceId, uint32_t size, int32_t type, int32_t format, |
| const native_handle *resource); |
| virtual int setOperationParameter( |
| int32_t handle, int32_t type, const Vector<float> &floats, const Vector<int32_t> &ints); |
| virtual status_t dump(int fd, const Vector<String16>& args); |
| |
| status_t dumpProtoLocked(int fd, ConnectionSafeAutolock* connLock) const; |
| String8 getSensorName(int handle) const; |
| String8 getSensorStringType(int handle) const; |
| bool isVirtualSensor(int handle) const; |
| std::shared_ptr<SensorInterface> getSensorInterfaceFromHandle(int handle) const; |
| int getDeviceIdFromHandle(int handle) const; |
| bool isWakeUpSensor(int type) const; |
| void recordLastValueLocked(sensors_event_t const* buffer, size_t count); |
| static void sortEventBuffer(sensors_event_t* buffer, size_t count); |
| bool registerSensor(std::shared_ptr<SensorInterface> sensor, bool isDebug = false, |
| bool isVirtual = false, int deviceId = RuntimeSensor::DEFAULT_DEVICE_ID); |
| bool registerVirtualSensor(std::shared_ptr<SensorInterface> sensor, bool isDebug = false); |
| bool registerDynamicSensorLocked(std::shared_ptr<SensorInterface> sensor, bool isDebug = false); |
| bool unregisterDynamicSensorLocked(int handle); |
| status_t cleanupWithoutDisable(const sp<SensorEventConnection>& connection, int handle); |
| status_t cleanupWithoutDisableLocked(const sp<SensorEventConnection>& connection, int handle); |
| void cleanupAutoDisabledSensorLocked(const sp<SensorEventConnection>& connection, |
| sensors_event_t const* buffer, const int count); |
| bool canAccessSensor(const Sensor& sensor, const char* operation, |
| const String16& opPackageName); |
| void addSensorIfAccessible(const String16& opPackageName, const Sensor& sensor, |
| Vector<Sensor>& accessibleSensorList); |
| static bool hasPermissionForSensor(const Sensor& sensor); |
| static int getTargetSdkVersion(const String16& opPackageName); |
| static void resetTargetSdkVersionCache(const String16& opPackageName); |
| // Checks if the provided target operating mode is valid and returns the enum if it is. |
| static bool getTargetOperatingMode(const std::string &inputString, Mode *targetModeOut); |
| status_t changeOperatingMode(const Vector<String16>& args, Mode targetOperatingMode); |
| // SensorService acquires a partial wakelock for delivering events from wake up sensors. This |
| // method checks whether all the events from these wake up sensors have been delivered to the |
| // corresponding applications, if yes the wakelock is released. |
| void checkWakeLockState(); |
| void checkWakeLockStateLocked(ConnectionSafeAutolock* connLock); |
| bool isWakeLockAcquired(); |
| bool isWakeUpSensorEvent(const sensors_event_t& event) const; |
| |
| sp<Looper> getLooper() const; |
| |
| // Reset mWakeLockRefCounts for all SensorEventConnections to zero. This may happen if |
| // SensorService did not receive any acknowledgements from apps which have registered for |
| // wake_up sensors. |
| void resetAllWakeLockRefCounts(); |
| |
| // Acquire or release wake_lock. If wake_lock is acquired, set the timeout in the looper to 5 |
| // seconds and wake the looper. |
| void setWakeLockAcquiredLocked(bool acquire); |
| |
| // Send events from the event cache for this particular connection. |
| void sendEventsFromCache(const sp<SensorEventConnection>& connection); |
| |
| // If SensorService is operating in RESTRICTED mode, only select whitelisted packages are |
| // allowed to register for or call flush on sensors. Typically only cts test packages are |
| // allowed. |
| bool isAllowListedPackage(const String8& packageName); |
| |
| // Returns true if a connection with the specified opPackageName has no access to sensors |
| // in the RESTRICTED mode (i.e. the service is in RESTRICTED mode, and the package is not |
| // whitelisted). mLock must be held to invoke this method. |
| bool isOperationRestrictedLocked(const String16& opPackageName); |
| |
| status_t adjustSamplingPeriodBasedOnMicAndPermission(nsecs_t* requestedPeriodNs, |
| const String16& opPackageName); |
| status_t adjustRateLevelBasedOnMicAndPermission(int* requestedRateLevel, |
| const String16& opPackageName); |
| bool isRateCappedBasedOnPermission(const String16& opPackageName); |
| bool isPackageDebuggable(const String16& opPackageName); |
| |
| // Reset the state of SensorService to NORMAL mode. |
| status_t resetToNormalMode(); |
| status_t resetToNormalModeLocked(); |
| |
| // Transforms the UUIDs for all the sensors into proper IDs. |
| void makeUuidsIntoIdsForSensorList(Vector<Sensor> &sensorList) const; |
| // Gets the appropriate ID from the given UUID. |
| int32_t getIdFromUuid(const Sensor::uuid_t &uuid) const; |
| // Either read from storage or create a new one. |
| static bool initializeHmacKey(); |
| |
| // Enable SCHED_FIFO priority for thread |
| void enableSchedFifoMode(); |
| |
| // Sets whether the given UID can get sensor data |
| void onUidStateChanged(uid_t uid, UidState state); |
| |
| // Returns true if a connection with the given uid and opPackageName |
| // currently has access to sensors. |
| bool hasSensorAccess(uid_t uid, const String16& opPackageName); |
| // Same as hasSensorAccess but with mLock held. |
| bool hasSensorAccessLocked(uid_t uid, const String16& opPackageName); |
| |
| // Overrides the UID state as if it is idle |
| status_t handleSetUidState(Vector<String16>& args, int err); |
| // Clears the override for the UID state |
| status_t handleResetUidState(Vector<String16>& args, int err); |
| // Gets the UID state |
| status_t handleGetUidState(Vector<String16>& args, int out, int err); |
| // Prints the shell command help |
| status_t printHelp(int out); |
| |
| // temporarily stops all active direct connections and disables all sensors |
| void disableAllSensors(); |
| void disableAllSensorsLocked(ConnectionSafeAutolock* connLock); |
| // restarts the previously stopped direct connections and enables all sensors |
| void enableAllSensors(); |
| void enableAllSensorsLocked(ConnectionSafeAutolock* connLock); |
| |
| // Caps active direct connections (when the mic toggle is flipped to on) |
| void capRates(); |
| // Removes the capped rate on active direct connections (when the mic toggle is flipped to off) |
| void uncapRates(); |
| |
| bool isInjectionMode(int mode); |
| |
| static inline bool isAudioServerOrSystemServerUid(uid_t uid) { |
| return multiuser_get_app_id(uid) == AID_SYSTEM || uid == AID_AUDIOSERVER; |
| } |
| |
| static uint8_t sHmacGlobalKey[128]; |
| static bool sHmacGlobalKeyIsValid; |
| |
| static std::atomic_uint64_t curProxCallbackSeq; |
| static std::atomic_uint64_t completedCallbackSeq; |
| |
| SensorServiceUtil::SensorList mSensors; |
| status_t mInitCheck; |
| |
| // Socket buffersize used to initialize BitTube. This size depends on whether batching is |
| // supported or not. |
| uint32_t mSocketBufferSize; |
| sp<Looper> mLooper; |
| sp<SensorEventAckReceiver> mAckReceiver; |
| sp<RuntimeSensorHandler> mRuntimeSensorHandler; |
| // Mutex and CV used to notify the mRuntimeSensorHandler thread that there are new events. |
| std::mutex mRutimeSensorThreadMutex; |
| std::condition_variable mRuntimeSensorsCv; |
| |
| // protected by mLock |
| mutable Mutex mLock; |
| DefaultKeyedVector<int, SensorRecord*> mActiveSensors; |
| std::unordered_set<int> mActiveVirtualSensors; |
| SensorConnectionHolder mConnectionHolder; |
| bool mWakeLockAcquired; |
| sensors_event_t *mSensorEventBuffer, *mSensorEventScratch, *mRuntimeSensorEventBuffer; |
| // WARNING: these SensorEventConnection instances must not be promoted to sp, except via |
| // modification to add support for them in ConnectionSafeAutolock |
| wp<const SensorEventConnection> * mMapFlushEventsToConnections; |
| std::unordered_map<int, SensorServiceUtil::RecentEventLogger*> mRecentEvent; |
| Mode mCurrentOperatingMode; |
| std::queue<sensors_event_t> mRuntimeSensorEventQueue; |
| std::unordered_map</*deviceId*/int, sp<RuntimeSensorCallback>> mRuntimeSensorCallbacks; |
| |
| // true if the head tracker sensor type is currently restricted to system usage only |
| // (can only be unrestricted for testing, via shell cmd) |
| bool mHtRestricted = true; |
| |
| // This packagaName is set when SensorService is in RESTRICTED or DATA_INJECTION mode. Only |
| // applications with this packageName are allowed to activate/deactivate or call flush on |
| // sensors. To run CTS this is can be set to ".cts." and only CTS tests will get access to |
| // sensors. |
| String8 mAllowListedPackage; |
| |
| int mNextSensorRegIndex; |
| Vector<SensorRegistrationInfo> mLastNSensorRegistrations; |
| |
| sp<UidPolicy> mUidPolicy; |
| sp<SensorPrivacyPolicy> mSensorPrivacyPolicy; |
| |
| static AppOpsManager sAppOpsManager; |
| static std::map<String16, int> sPackageTargetVersion; |
| static Mutex sPackageTargetVersionLock; |
| static String16 sSensorInterfaceDescriptorPrefix; |
| |
| sp<MicrophonePrivacyPolicy> mMicSensorPrivacyPolicy; |
| |
| // Keeps track of the handles of all proximity sensors in the system. |
| std::vector<int32_t> mProxSensorHandles; |
| // The last proximity sensor active state reported to listeners. |
| bool mLastReportedProxIsActive; |
| // Listeners subscribed to receive updates on the proximity sensor active state. |
| std::vector<sp<ProximityActiveListener>> mProximityActiveListeners; |
| }; |
| |
| } // namespace android |
| #endif // ANDROID_SENSOR_SERVICE_H |