| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2009, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <!-- These resources are around just to allow their values to be customized |
| for different hardware and product builds. --> |
| <resources> |
| <!-- Component to be used as the recents implementation. Must implement the |
| RecentsImplementation interface. This name is in the ComponentName flattened format |
| (package/class) --> |
| <string name="config_recentsComponent" translatable="false">com.android.systemui.recents.OverviewProxyRecentsImpl</string> |
| |
| <!-- Whether or not we show the number in the bar. --> |
| <bool name="config_statusBarShowNumber">false</bool> |
| |
| <!-- For how long the lock screen can be on before the display turns off. --> |
| <integer name="config_lockScreenDisplayTimeout">10000</integer> |
| |
| <!-- Vibrator pattern for camera gesture launch. --> |
| <integer-array translatable="false" name="config_cameraLaunchGestureVibePattern"> |
| <item>0</item> |
| <item>400</item> |
| </integer-array> |
| |
| <!-- decay duration (from size_max -> size), in ms --> |
| <integer name="navigation_bar_deadzone_hold">333</integer> |
| <integer name="navigation_bar_deadzone_decay">333</integer> |
| |
| <!-- orientation of the dead zone when touches have recently occurred elsewhere on screen --> |
| <integer name="navigation_bar_deadzone_orientation">0</integer> |
| |
| <!-- Whether or not lockscreen shortcuts can be customized --> |
| <bool name="custom_lockscreen_shortcuts_enabled">false</bool> |
| |
| <!-- Whether or not long-pressing on keyguard will display to customize lockscreen --> |
| <bool name="long_press_keyguard_customize_lockscreen_enabled">false</bool> |
| |
| <bool name="config_dead_zone_flash">false</bool> |
| |
| <!-- Whether to enable dimming navigation buttons when wallpaper is not visible, should be |
| enabled for OLED devices to reduce/prevent burn in on the navigation bar (because of the |
| black background and static button placements) and disabled for all other devices to |
| prevent wasting cpu cycles on the dimming animation --> |
| <bool name="config_navigation_bar_enable_auto_dim_no_visible_wallpaper">true</bool> |
| |
| <!-- The maximum number of tiles in the QuickQSPanel --> |
| <integer name="quick_qs_panel_max_tiles">4</integer> |
| |
| <!-- The maximum number of rows in the QuickQSPanel --> |
| <integer name="quick_qs_panel_max_rows">2</integer> |
| |
| <!-- The number of columns in the QuickSettings --> |
| <integer name="quick_settings_num_columns">2</integer> |
| |
| <!-- The number of rows in the QuickSettings --> |
| <integer name="quick_settings_max_rows">4</integer> |
| |
| <!-- Override column number for quick settings. |
| For now, this value has effect only when flag lockscreen.enable_landscape is enabled. |
| TODO (b/293252410) - change this comment/resource when flag is enabled --> |
| <integer name="small_land_lockscreen_quick_settings_num_columns">2</integer> |
| |
| <!-- Override row number for quick settings. |
| For now, this value has effect only when flag lockscreen.enable_landscape is enabled. |
| TODO (b/293252410) - change this comment/resource when flag is enabled --> |
| <integer name="small_land_lockscreen_quick_settings_max_rows">2</integer> |
| |
| <!-- If the dp width of the available space is <= this value, potentially adjust the number |
| of media recommendation items--> |
| <integer name="default_qs_media_rec_width_dp">380</integer> |
| |
| <!-- The number of columns that the top level tiles span in the QuickSettings --> |
| |
| <!-- The default tiles to display in QuickSettings --> |
| <string name="quick_settings_tiles_default" translatable="false"> |
| internet,bt,flashlight,dnd,alarm,airplane,controls,wallet,rotation,battery,cast,screenrecord,mictoggle,cameratoggle,custom(com.android.permissioncontroller/.permission.service.v33.SafetyCenterQsTileService) |
| </string> |
| |
| <!-- The class path of the Safety Quick Settings Tile --> |
| <string name="safety_quick_settings_tile_class" translatable="false"> |
| com.android.permissioncontroller.permission.service.v33.SafetyCenterQsTileService |
| </string> |
| |
| <!-- The minimum number of tiles to display in QuickSettings --> |
| <integer name="quick_settings_min_num_tiles">6</integer> |
| |
| <!-- Tiles native to System UI. Order should match "quick_settings_tiles_default" --> |
| <string name="quick_settings_tiles_stock" translatable="false"> |
| internet,bt,flashlight,dnd,alarm,airplane,controls,wallet,rotation,battery,cast,screenrecord,mictoggle,cameratoggle,location,hotspot,inversion,saver,dark,work,night,reverse,reduce_brightness,qr_code_scanner,onehanded,color_correction,dream,font_scaling |
| </string> |
| |
| <!-- The tiles to display in QuickSettings --> |
| <string name="quick_settings_tiles" translatable="false">default</string> |
| |
| <!-- The tiles to display in QuickSettings in retail mode --> |
| <string name="quick_settings_tiles_retail_mode" translatable="false"> |
| night,dark,dnd,flashlight,rotation,location |
| </string> |
| |
| <!-- Tiles to auto add to Quick Settings upon first change of a given secure setting. |
| The syntax is setting-name:spec. If the tile is a TileService, the spec should be specified |
| as custom(package/class). Relative class name is supported. --> |
| <string-array name="config_quickSettingsAutoAdd" translatable="false"> |
| <item>accessibility_display_daltonizer_enabled:color_correction</item> |
| <item>accessibility_display_inversion_enabled:inversion</item> |
| <item>one_handed_mode_enabled:onehanded</item> |
| <item>accessibility_font_scaling_has_been_changed:font_scaling</item> |
| </string-array> |
| |
| <!-- Use collapsed layout for media player in landscape QQS --> |
| <bool name="config_quickSettingsMediaLandscapeCollapsed">true</bool> |
| |
| <!-- Show indicator for Wifi on but not connected. --> |
| <bool name="config_showWifiIndicatorWhenEnabled">false</bool> |
| |
| <!-- The number of milliseconds before the heads up notification auto-dismisses. --> |
| <integer name="heads_up_notification_decay">5000</integer> |
| |
| <!-- The number of milliseconds before the heads up notification sent automatically by the system auto-dismisses. --> |
| <integer name="auto_heads_up_notification_decay">3000</integer> |
| |
| <!-- The number of milliseconds after a heads up notification is pushed back |
| before the app can interrupt again. --> |
| <integer name="heads_up_default_snooze_length_ms">60000</integer> |
| |
| <!-- Minimum display time for a heads up notification, in milliseconds. --> |
| <integer name="heads_up_notification_minimum_time">2000</integer> |
| |
| <!-- Display time for a sticky heads up notification, in milliseconds. --> |
| <integer name="sticky_heads_up_notification_time">60000</integer> |
| |
| <!-- Whether to hide the notification header when the HUN is expanded. --> |
| <bool name="heads_up_notification_hides_header">false</bool> |
| |
| <!-- The number of milliseconds before the heads up notification accepts touches. --> |
| <integer name="touch_acceptance_delay">700</integer> |
| |
| <!-- The number of milliseconds to extend ambient pulse by when prompted (e.g. on touch) --> |
| <integer name="ambient_notification_extension_time">10000</integer> |
| |
| <!-- The maximum count of notifications on Keyguard. The rest will be collapsed in an overflow |
| card. --> |
| <integer name="keyguard_max_notification_count">-1</integer> |
| |
| <!-- Doze: does this device support STATE_DOZE? --> |
| <bool name="doze_display_state_supported">false</bool> |
| |
| <!-- Doze: does this device support STATE_DOZE_SUSPEND? --> |
| <bool name="doze_suspend_display_state_supported">false</bool> |
| |
| <!-- Doze: should the significant motion sensor be used as a pulse signal? --> |
| <bool name="doze_pulse_on_significant_motion">false</bool> |
| |
| <!-- Doze: check proximity sensor before pulsing? --> |
| <bool name="doze_proximity_check_before_pulse">true</bool> |
| |
| <!-- Doze: only register sensors that use prox when device is in certain Display states. This |
| delays registering sensors when device first shows dozing UI but the |
| Display & Power state hasn't changed to low-power mode yet. --> |
| <bool name="doze_selectively_register_prox">false</bool> |
| |
| <!-- Doze: whether the single tap sensor uses the proximity sensor. |
| If both this parameter and doze_selectively_register_prox are true, registration for the |
| sensor will be delayed when the device first enters dozing but the device has not entered its |
| low powered state yet. --> |
| <bool name="doze_single_tap_uses_prox">true</bool> |
| |
| <!-- Doze: whether the single tap sensor uses the proximity sensor in the given posture. |
| See doze_single_tap_uses_prox for usage. --> |
| <integer-array name="doze_single_tap_uses_prox_posture_mapping"> |
| <item>1</item> <!-- UNKNOWN --> |
| <item>1</item> <!-- CLOSED --> |
| <item>1</item> <!-- HALF_OPENED --> |
| <item>1</item> <!-- OPENED --> |
| </integer-array> |
| |
| <!-- Doze: whether the long press sensor uses the proximity sensor. |
| If both this parameter and doze_selectively_register_prox are true, registration for the |
| sensor will be delayed when the device first enters dozing but the device has not entered its |
| low powered state yet. --> |
| <bool name="doze_long_press_uses_prox">true</bool> |
| |
| <!-- Doze: duration to avoid false pickup gestures triggered by notification vibrations --> |
| <integer name="doze_pickup_vibration_threshold">2000</integer> |
| |
| <!-- Doze: quick pickup duration to stay in AOD until the next gesture is triggered --> |
| <integer name="doze_quick_pickup_aod_duration">5000</integer> |
| |
| <!-- Type of a sensor that provides a low-power estimate of the desired display |
| brightness, suitable to listen to while the device is asleep (e.g. during |
| always-on display) --> |
| <string name="doze_brightness_sensor_type" translatable="false"></string> |
| |
| <!-- Name of a sensor per posture state that provides a low-power estimate of the desired |
| display brightness, suitable to listen to while the device is asleep (e.g. during |
| always-on display) --> |
| <string-array name="doze_brightness_sensor_name_posture_mapping" translatable="false"> |
| <!-- UNKNOWN --> |
| <!-- CLOSED --> |
| <!-- HALF_OPENED --> |
| <!-- OPENED --> |
| </string-array> |
| |
| <!-- Override value to use for proximity sensor. --> |
| <string name="proximity_sensor_type" translatable="false"></string> |
| |
| <!-- Sensor type per posture state to use for proximity sensor --> |
| <string-array name="proximity_sensor_posture_mapping" translatable="false"> |
| <!-- UNKNOWN --> |
| <!-- CLOSED --> |
| <!-- HALF_OPENED --> |
| <!-- OPENED --> |
| </string-array> |
| |
| <!-- If using proximity_sensor_type, specifies a threshold value to distinguish near and |
| far break points. A sensor value less than this is considered "near". --> |
| <item name="proximity_sensor_threshold" translatable="false" format="float" type="dimen"></item> |
| |
| <!-- If using proximity_sensor_type, specifies a threshold value to distinguish near and |
| far break points. A sensor value more than this is considered "far". If not set, |
| proximity_sensor_threshold is used. This allows one to implement a latching mechanism for |
| noisy sensors. --> |
| <item name="proximity_sensor_threshold_latch" translatable="false" format="float" type="dimen"></item> |
| |
| <!-- Override value to use for proximity sensor as confirmation for proximity_sensor_type. --> |
| <string name="proximity_sensor_secondary_type" translatable="false"></string> |
| |
| <!-- Sensor type per posture state to use for proximity sensor as a confirmation for |
| proximity_sensor_type. --> |
| <string-array name="proximity_sensor_secondary_posture_mapping" translatable="false"> |
| <!-- UNKNOWN --> |
| <!-- CLOSED --> |
| <!-- HALF_OPENED --> |
| <!-- OPENED --> |
| </string-array> |
| |
| <!-- If using proximity_sensor_secondary_type, specifies a threshold value to distinguish |
| near and far break points. A sensor value less than this is considered "near". --> |
| <item name="proximity_sensor_secondary_threshold" translatable="false" format="float" |
| type="dimen"></item> |
| |
| <!-- If using proximity_sensor_secondary_type, specifies a threshold value to distinguish near and |
| far break points. A sensor value more than this is considered "far". If not set, |
| proximity_sensor_secondary_threshold is used. This allows one to implement a latching |
| mechanism for noisy sensors. --> |
| <item name="proximity_sensor_secondary_threshold_latch" translatable="false" format="float" type="dimen"></item> |
| |
| <!-- Doze: pulse parameter - how long does it take to fade in? --> |
| <integer name="doze_pulse_duration_in">130</integer> |
| |
| <!-- Doze: pulse parameter - once faded in, how long does it stay visible? --> |
| <integer name="doze_pulse_duration_visible">6000</integer> |
| |
| <!-- Doze: pulse parameter - how long does it take to fade out? --> |
| <integer name="doze_pulse_duration_out">600</integer> |
| |
| <!-- Doze: alpha to apply to small icons when dozing --> |
| <integer name="doze_small_icon_alpha">222</integer><!-- 87% of 0xff --> |
| |
| <!-- Doze: Table that translates sensor values from the doze_brightness_sensor_type sensor |
| to brightness values; -1 means keeping the current brightness. --> |
| <integer-array name="config_doze_brightness_sensor_to_brightness"> |
| <item>-1</item> <!-- 0: OFF --> |
| <item>2</item> <!-- 1: NIGHT --> |
| <item>5</item> <!-- 2: LOW --> |
| <item>27</item> <!-- 3: HIGH --> |
| <item>28</item> <!-- 4: SUN --> |
| </integer-array> |
| |
| <!-- Doze: Table that translates sensor values from the doze_brightness_sensor_type sensor |
| to an opacity value for a black scrim that is overlayed in AOD1. |
| Valid range is from 0 (transparent) to 255 (opaque). |
| -1 means keeping the current opacity. --> |
| <integer-array name="config_doze_brightness_sensor_to_scrim_opacity"> |
| <item>-1</item> <!-- 0: OFF --> |
| <item>0</item> <!-- 1: NIGHT --> |
| <item>0</item> <!-- 2: LOW --> |
| <item>0</item> <!-- 3: HIGH --> |
| <item>0</item> <!-- 4: SUN --> |
| </integer-array> |
| |
| <!-- Doze: whether the double tap sensor reports 2D touch coordinates --> |
| <bool name="doze_double_tap_reports_touch_coordinates">false</bool> |
| |
| <!-- Number of times to show the strong alarm warning text in the volume dialog --> |
| <integer name="zen_mode_alarm_warning_threshold">5</integer> |
| |
| <!-- Enable the default volume dialog --> |
| <bool name="enable_volume_ui">true</bool> |
| |
| <!-- Enable the default volume level warning dialog --> |
| <bool name="enable_safety_warning">true</bool> |
| |
| <!-- Whether to show the full screen user switcher. --> |
| <bool name="config_enableFullscreenUserSwitcher">false</bool> |
| |
| <!-- Determines whether the shell features all run on another thread. --> |
| <bool name="config_enableShellMainThread">true</bool> |
| |
| <!-- QS tile shape store width. negative implies fill configuration instead of stroke--> |
| <dimen name="config_qsTileStrokeWidthActive">-1dp</dimen> |
| <dimen name="config_qsTileStrokeWidthInactive">-1dp</dimen> |
| |
| <!-- SystemUI vender service, used in config_systemUIServiceComponents. --> |
| <string name="config_systemUIVendorServiceComponent" translatable="false">com.android.systemui.VendorServices</string> |
| |
| <!-- SystemUI Services (per user): The classes of the stuff to start for each user. This is a subset of the config_systemUIServiceComponents --> |
| <string-array name="config_systemUIServiceComponentsPerUser" translatable="false"> |
| <item>com.android.systemui.util.NotificationChannels</item> |
| </string-array> |
| |
| <!-- Nav bar button default ordering/layout --> |
| <string name="config_navBarLayout" translatable="false">left[.5W],back[1WC];home;recent[1WC],right[.5W]</string> |
| <string name="config_navBarLayoutQuickstep" translatable="false">back[1.7WC];home;contextual[1.7WC]</string> |
| <string name="config_navBarLayoutHandle" translatable="false">back[70AC];home_handle;ime_switcher[70AC]</string> |
| |
| <!-- Whether to show a warning notification when device's skin temperature is high. --> |
| <integer name="config_showTemperatureWarning">0</integer> |
| |
| <!-- Whether to show a alarm dialog when device's usb port is overheating. --> |
| <integer name="config_showUsbPortAlarm">0</integer> |
| |
| <item type="id" name="action_toggle_overview"/> |
| |
| <!-- Whether or not to show notifications to the user. If disabled, SystemUI will still be |
| registered as a notification listener, but will ignore all notification events. --> |
| <bool name="config_renderNotifications">true</bool> |
| |
| <!-- Whether or not the gear icon on notifications should be shown. The gear is shown when the |
| the notification is not swiped enough to dismiss it. --> |
| <bool name="config_showNotificationGear">true</bool> |
| |
| <!-- Whether or not a background should be drawn behind a notification. --> |
| <bool name="config_drawNotificationBackground">false</bool> |
| |
| <!-- Whether or the notifications can be shown and dismissed with a drag. --> |
| <bool name="config_enableNotificationShadeDrag">true</bool> |
| |
| <!-- Whether to show activity indicators in the status bar --> |
| <bool name="config_showActivity">false</bool> |
| |
| <!-- Whether or not to show the notification shelf that houses the icons of notifications that |
| have been scrolled off-screen. --> |
| <bool name="config_showNotificationShelf">true</bool> |
| |
| <!-- Whether or not the fade on the notification is based on the amount that it has been swiped |
| off-screen. --> |
| <bool name="config_fadeDependingOnAmountSwiped">false</bool> |
| |
| <!-- Whether or the notifications should be clipped to be reduced in height if it has been |
| scrolled to the top of the screen. --> |
| <bool name="config_clipNotificationScrollToTop">true</bool> |
| |
| <!-- Whether or not the notification contents should be clipped to any background that is |
| set on the notification container. For example, if this value is true and the background |
| has rounded corners, then the contents will be clipped to those corners. --> |
| <bool name="config_clipNotificationsToOutline">false</bool> |
| |
| <!-- Whether or not notifications that can be expanded will always be in their expanded state. |
| This value only affects notifications that are not a group of notifications from the same |
| applications. If this value is false, then only the first notification will be expanded |
| when config_autoExpandFirstNotification is true; the other notifications need to be |
| manually expanded by the user. --> |
| <bool name="config_alwaysExpandNonGroupedNotifications">false</bool> |
| |
| <!-- Whether or not the first expandable notification will be expanded automatically by the |
| system. This value only affects notifications that are not a group of notifications from |
| the same applications and when config_alwaysExpandNonGroupedNotifications is false. --> |
| <bool name="config_autoExpandFirstNotification">true</bool> |
| |
| <!-- Whether or not an expandable notification can be manually expanded or collapsed by the |
| user. Grouped notifications are still expandable even if this value is false. --> |
| <bool name="config_enableNonGroupedNotificationExpand">true</bool> |
| |
| <!-- Whether or not there should be dividing lines between child notifications when the |
| group has been expanded. --> |
| <bool name="config_showDividersWhenGroupNotificationExpanded">false</bool> |
| |
| <!-- Whether or not the dividing lines should be shown when the container is expanding and |
| collapsing. If this value is true, then the lines will only show when the container has |
| been completely expanded. --> |
| <bool name="config_hideDividersDuringExpand">true</bool> |
| |
| <!-- Whether or not child notifications that are part of a group will have shadows. --> |
| <bool name="config_enableShadowOnChildNotifications">true</bool> |
| |
| <!-- If true, group numbers are shown in the expander instead of via "+N" overflow number --> |
| <bool name="config_showNotificationGroupCountInExpander">true</bool> |
| |
| <!-- Whether or not a view containing child notifications will have a custom background when |
| it has been expanded to reveal its children. --> |
| <bool name="config_showGroupNotificationBgWhenExpanded">false</bool> |
| |
| <!-- Should we vibrate on an icon animation of the shelf. This should only be active if the |
| vibrator is capable of subtle vibrations --> |
| <bool name="config_vibrateOnIconAnimation">false</bool> |
| |
| <!-- Notifications are sized to match the width of two (of 4) qs tiles in landscape. --> |
| <bool name="config_skinnyNotifsInLandscape">true</bool> |
| |
| <!-- Snooze: default notificaiton snooze time. --> |
| <integer name="config_notification_snooze_time_default">60</integer> |
| |
| <!-- Snooze: List of snooze values in integer minutes. --> |
| <integer-array name="config_notification_snooze_times"> |
| <item>15</item> |
| <item>30</item> |
| <item>60</item> |
| <item>120</item> |
| </integer-array> |
| |
| <!-- Smart replies in notifications: Whether smart replies in notifications are enabled. --> |
| <bool name="config_smart_replies_in_notifications_enabled">true</bool> |
| |
| <!-- Smart replies in notifications: Whether we disable the feature unless the app targets P --> |
| <bool name="config_smart_replies_in_notifications_requires_targeting_p">true</bool> |
| |
| <!-- Smart replies in notifications: Maximum number of times SmartReplyView will try to find a |
| better (narrower) line-break for a double-line smart reply button. --> |
| <integer name="config_smart_replies_in_notifications_max_squeeze_remeasure_attempts">3</integer> |
| |
| <!-- Smart replies in notifications: Whether by default tapping on a choice should let the user |
| edit the input before it is sent to the app. Developers can override this via |
| RemoteInput.Builder.setEditChoicesBeforeSending. --> |
| <bool name="config_smart_replies_in_notifications_edit_choices_before_sending">false</bool> |
| |
| <!-- Smart replies in notifications: Whether smart suggestions in notifications are enabled in |
| heads-up notifications. --> |
| <bool name="config_smart_replies_in_notifications_show_in_heads_up">true</bool> |
| |
| <!-- Smart replies in notifications: Minimum number of system generated smart replies that |
| should be shown in a notification. If we cannot show at least this many replies we instead |
| show none. --> |
| <integer name="config_smart_replies_in_notifications_min_num_system_generated_replies">0</integer> |
| |
| <!-- Smart replies in notifications: Maximum number of smart actions to show in notifications. |
| --> |
| <integer name="config_smart_replies_in_notifications_max_num_actions">-1</integer> |
| |
| <!-- Smart replies in notifications: Delay (ms) before smart suggestions are clickable, since |
| they were added. --> |
| <integer name="config_smart_replies_in_notifications_onclick_init_delay">200</integer> |
| |
| <!-- Smartspace trampoline activity that is used when the user taps smartspace. --> |
| <string name="config_smartspaceTrampolineActivityComponent" translatable="false">com.google.android.apps.gsa.staticplugins.opa.smartspace.ExportedSmartspaceTrampolineActivity</string> |
| |
| <!-- Screenshot editing default activity. Must handle ACTION_EDIT image/png intents. |
| Blank sends the user to the Chooser first. |
| This name is in the ComponentName flattened format (package/class) --> |
| <string name="config_screenshotEditor" translatable="false"></string> |
| |
| <!-- ComponentName for the file browsing app that the system would expect to be used in work |
| profile. The icon for this app will be shown to the user when informing them that a |
| screenshot has been saved to work profile. If blank, a default icon will be shown. --> |
| <string name="config_sceenshotWorkProfileFilesApp" translatable="false"></string> |
| |
| <!-- The component name of the screenshot editing activity that provides the App Clips flow. |
| The App Clips flow includes taking a screenshot, showing user screenshot cropping activity |
| and finally letting user send the screenshot to the calling notes app. This activity |
| should not send the screenshot to the calling activity without user consent. --> |
| <string name="config_screenshotAppClipsActivityComponent" translatable="false" |
| >com.android.systemui/com.android.systemui.screenshot.appclips.AppClipsActivity</string> |
| |
| <!-- Remote copy default activity. Must handle REMOTE_COPY_ACTION intents. |
| This name is in the ComponentName flattened format (package/class) --> |
| <string name="config_remoteCopyPackage" translatable="false"></string> |
| |
| <!-- SystemUI Plugins that can be loaded on user builds. --> |
| <string-array name="config_pluginAllowlist" translatable="false"> |
| <item>com.android.systemui</item> |
| </string-array> |
| |
| <!-- Launcher package name for overlaying icons. --> |
| <string name="launcher_overlayable_package" translatable="false">com.android.launcher3</string> |
| |
| <!-- ThemePicker package name for overlaying icons. --> |
| <string name="themepicker_overlayable_package" translatable="false">com.android.wallpaper</string> |
| |
| <!-- Default rounded corner curve (a Bezier). Must match (the curved path in) rounded.xml. |
| Note that while rounded.xml includes the entire path (including the horizontal and vertical |
| corner edges), this pulls out just the curve. |
| --> |
| <string name="config_rounded_mask" translatable="false">"M8,0C3.6,0,0,3.6,0,8"</string> |
| |
| <!-- Preferred refresh rate at keyguard, if supported by the display. Overrides |
| keyguardMaxRefreshRate. --> |
| <integer name="config_keyguardRefreshRate">-1</integer> |
| |
| <!-- Preferred max refresh rate at keyguard, if supported by the display. --> |
| <integer name="config_keyguardMaxRefreshRate">-1</integer> |
| |
| <!-- Defines system icons to be excluded from the display. That is to say, the icons in the |
| status bar that are part of this list are never displayed. Each item in the list must be a |
| string defined in core/res/res/config.xml to properly exclude the icon. |
| --> |
| <string-array name="config_statusBarIconsToExclude" translatable="false"> |
| <item>@*android:string/status_bar_rotate</item> |
| <item>@*android:string/status_bar_headset</item> |
| </string-array> |
| |
| |
| <!-- Whether to show estimate in QS header. Default to false in case there's not enough |
| space --> |
| <bool name="config_showBatteryEstimateQSBH">false</bool> |
| |
| <!-- Whether to show extra battery saver confirmation dialog. --> |
| <bool name="config_extra_battery_saver_confirmation">false</bool> |
| |
| <!-- A path representing a shield. Will sometimes be displayed with the battery icon when |
| needed. This path is a 10px wide and 13px tall. --> |
| <string name="config_batterymeterShieldPath" translatable="false"> |
| M5 0L0 1.88V6.19C0 9.35 2.13 12.29 5 13.01C7.87 12.29 10 9.35 10 6.19V1.88L5 0Z |
| </string> |
| |
| <!-- A path similar to frameworks/base/core/res/res/values/config.xml |
| config_mainBuiltInDisplayCutout that describes a path larger than the exact path of a outer |
| display cutout. If present as well as config_enableDisplayCutoutProtection is set to true, |
| then SystemUI will draw this "protection path" instead of the display cutout path that is |
| normally used for anti-aliasing. |
| |
| This path will only be drawn when the front-facing camera turns on, otherwise the main |
| DisplayCutout path will be rendered |
| --> |
| <string translatable="false" name="config_frontBuiltInDisplayCutoutProtection"></string> |
| |
| <!-- ID for the camera of outer display that needs extra protection --> |
| <string translatable="false" name="config_protectedCameraId"></string> |
| <!-- Physical ID for the camera of outer display that needs extra protection --> |
| <string translatable="false" name="config_protectedPhysicalCameraId"></string> |
| |
| <!-- Similar to config_frontBuiltInDisplayCutoutProtection but for inner display. --> |
| <string translatable="false" name="config_innerBuiltInDisplayCutoutProtection"></string> |
| |
| <!-- ID for the camera of inner display that needs extra protection --> |
| <string translatable="false" name="config_protectedInnerCameraId"></string> |
| <!-- Physical ID for the camera of inner display that needs extra protection --> |
| <string translatable="false" name="config_protectedInnerPhysicalCameraId"></string> |
| |
| <!-- Comma-separated list of packages to exclude from camera protection e.g. |
| "com.android.systemui,com.android.xyz" --> |
| <string translatable="false" name="config_cameraProtectionExcludedPackages"></string> |
| |
| <!-- Flag to turn on the rendering of the above path or not --> |
| <bool name="config_enableDisplayCutoutProtection">false</bool> |
| |
| <!-- Controls can query 2 preferred applications for limited number of suggested controls. |
| This config value should contain a list of package names of thoses preferred applications. |
| --> |
| <string-array translatable="false" name="config_controlsPreferredPackages" /> |
| |
| <!-- Max number of columns for quick controls area --> |
| <integer name="controls_max_columns">2</integer> |
| |
| <!-- Max number of columns for power menu lite --> |
| <integer name="power_menu_lite_max_columns">2</integer> |
| <!-- Max number of rows for power menu lite --> |
| <integer name="power_menu_lite_max_rows">4</integer> |
| |
| <!-- If the dp width of the available space is <= this value, potentially adjust the number |
| of columns--> |
| <integer name="controls_max_columns_adjust_below_width_dp">320</integer> |
| <!-- If the config font scale is >= this value, potentially adjust the number of columns--> |
| <item name="controls_max_columns_adjust_above_font_scale" translatable="false" format="float" type="dimen">1.25</item> |
| |
| <!-- Show a separate icon for low and high volume on the volume dialog --> |
| <bool name="config_showLowMediaVolumeIcon">false</bool> |
| |
| <!-- Change the volume row tint when it is inactive, i.e. when it is being dismissed --> |
| <bool name="config_changeVolumeRowTintWhenInactive">true</bool> |
| |
| <!-- The duraction of the show animation for the volume dialog in milliseconds --> |
| <integer name="config_dialogShowAnimationDurationMs">300</integer> |
| |
| <!-- The duraction of the hide animation for the volume dialog in milliseconds --> |
| <integer name="config_dialogHideAnimationDurationMs">250</integer> |
| |
| <!-- Whether or not to show a notification for an unknown battery state --> |
| <bool name="config_showNotificationForUnknownBatteryState">false</bool> |
| <!-- content URL in a notification when ACTION_BATTERY_CHANGED.EXTRA_PRESENT field is false --> |
| <string translatable="false" name="config_batteryStateUnknownUrl"></string> |
| |
| <!-- Package name of the preferred system app to perform eSOS action --> |
| <string name="config_preferredEmergencySosPackage" translatable="false"></string> |
| |
| <!-- Whether to show the side fps hint while on bouncer --> |
| <bool name="config_show_sidefps_hint_on_bouncer">true</bool> |
| |
| <!-- Max number of lines we want to show for the bouncer secondary message --> |
| <integer name="bouncer_secondary_message_lines">2</integer> |
| |
| <!-- Whether to use the split 2-column notification shade --> |
| <bool name="config_use_split_notification_shade">false</bool> |
| |
| <!-- Whether to force split shade. |
| For now, this value has effect only when flag lockscreen.enable_landscape is enabled. |
| TODO (b/293252410) - change this comment/resource when flag is enabled --> |
| <bool name="force_config_use_split_notification_shade">false</bool> |
| |
| <!-- Whether we use large screen shade header which takes only one row compared to QS header --> |
| <bool name="config_use_large_screen_shade_header">false</bool> |
| |
| <!-- Whether notification header should never show section headers. --> |
| <bool name="config_notification_never_show_section_headers">false</bool> |
| |
| <!-- Default udfps icon. Same path as ic_fingerprint.xml --> |
| <string name="config_udfpsIcon" translatable="false"> |
| M25.5,16.3283C28.47,14.8433 31.9167,14 35.5834,14C39.2501,14 42.6968,14.8433 45.6668,16.3283 |
| M20,28.6669C22.7683,24.3402 28.7084,21.3335 35.5834,21.3335C42.4585,21.3335 48.3985, |
| 24.3402 51.1669,28.6669 |
| M22.8607,47.0002C21.834,44.3235 21.834,41.5002 21.834,41.5002C21.834, |
| 34.4051 27.7374,28.6667 35.5841,28.6667C43.4308,28.6667 49.3341,34.4051 49.3341,41.5002 |
| M49.3344,41.5003V42.0319C49.3344,44.7636 47.1161,47.0003 44.3661,47.0003C41.9461, |
| 47.0003 39.8744,45.2403 39.471,42.857L38.9577, |
| 39.7769C38.591,37.5953 36.7027,36.0002 34.5027, |
| 36.0002C26.5826,36.0002 29.846,49.1087 35.291,50.6487 |
| M44.9713,54.6267C42.5513,56.7167 39.2879,58.0001 35.5846,58.0001C32.2296, |
| 58.0001 29.2229,56.9551 26.8945,55.195 |
| </string> |
| |
| <!-- The time (in ms) needed to trigger the lock icon view's long-press affordance --> |
| <integer name="config_lockIconLongPress" translatable="false">200</integer> |
| |
| <!-- package name of a built-in camera app to use to restrict implicit intent resolution |
| when the double-press power gesture is used. Ignored if empty. --> |
| <string translatable="false" name="config_cameraGesturePackage"></string> |
| |
| <!-- Whether a transition of ACTIVITY_TYPE_DREAM to the home app should play a home sound |
| effect --> |
| <bool name="config_playHomeSoundAfterDream">false</bool> |
| |
| <!-- Whether a transition of ACTIVITY_TYPE_ASSISTANT to the home app should play a home sound |
| effect --> |
| <bool name="config_playHomeSoundAfterAssistant">false</bool> |
| |
| <!-- Whether to use window background blur for the volume dialog. --> |
| <bool name="config_volumeDialogUseBackgroundBlur">false</bool> |
| |
| <!-- The properties of the face auth camera in pixels --> |
| <integer-array name="config_face_auth_props"> |
| <!-- sensorLocationX --> |
| <!-- sensorLocationY --> |
| <!--sensorRadius --> |
| </integer-array> |
| |
| <!-- Overrides the behavior of the face unlock keyguard bypass setting: |
| 0 - Don't override the setting (default) |
| 1 - Override the setting to always bypass keyguard |
| 2 - Override the setting to never bypass keyguard --> |
| <integer name="config_face_unlock_bypass_override">0</integer> |
| |
| <!-- Messages that should NOT be shown to the user during face authentication on keyguard. |
| This includes both lockscreen and bouncer. This should be used to hide messages that may be |
| too chatty or messages that the user can't do much about. Entries are defined in |
| android.hardware.biometrics.face@1.0 types.hal. |
| |
| Although not visibly shown to the user, these acquired messages (sent per face auth frame) |
| are still counted towards the total frames to determine whether a deferred message |
| (see config_face_help_msgs_defer_until_timeout) meets the threshold % of frames to show on |
| face timeout. --> |
| <integer-array name="config_face_acquire_device_entry_ignorelist" translatable="false" > |
| </integer-array> |
| |
| <!-- Which face help messages to defer until face auth times out. If face auth is cancelled |
| or ends on another error, then the message is never surfaced. May also never surface |
| if it doesn't meet a threshold % of authentication frames specified by. |
| config_face_help_msgs_defer_until_timeout_threshold. --> |
| <integer-array name="config_face_help_msgs_defer_until_timeout"> |
| </integer-array> |
| |
| <!-- Which face help messages to ignore when determining the % of frames that meet |
| config_face_help_msgs_defer_until_timeout_threshold --> |
| <integer-array name="config_face_help_msgs_ignore"> |
| <item>20</item> <!-- FACE_ACQUIRED_START --> |
| <item>23</item> <!-- FACE_ACQUIRED_UNKNOWN --> |
| <item>24</item> <!-- FACE_ACQUIRED_FIRST_FRAME_RECEIVED --> |
| </integer-array> |
| |
| <!-- Percentage of face auth frames received required to show a deferred message at |
| FACE_ERROR_TIMEOUT. See config_face_help_msgs_defer_until_timeout for messages |
| that are deferred.--> |
| <item name="config_face_help_msgs_defer_until_timeout_threshold" |
| translatable="false" format="float" type="dimen"> |
| .75 |
| </item> |
| |
| <!-- Which face help messages to surface when fingerprint is also enrolled. |
| Message ids correspond with the acquired ids in BiometricFaceConstants --> |
| <integer-array name="config_face_help_msgs_when_fingerprint_enrolled"> |
| <item>3</item> <!-- TOO_DARK --> |
| <item>25</item> <!-- DARK_GLASSES --> |
| <item>26</item> <!-- MOUTH_COVERING_DETECTED --> |
| </integer-array> |
| |
| <!-- Which device wake-ups will trigger passive auth. These values correspond with |
| PowerManager#WakeReason. --> |
| <integer-array name="config_face_auth_wake_up_triggers"> |
| <item>1</item> <!-- WAKE_REASON_POWER_BUTTON --> |
| <item>4</item> <!-- WAKE_REASON_GESTURE --> |
| <item>6</item> <!-- WAKE_REASON_WAKE_KEY --> |
| <item>7</item> <!-- WAKE_REASON_WAKE_MOTION --> |
| <item>9</item> <!-- WAKE_REASON_LID --> |
| <item>12</item> <!-- WAKE_REASON_UNFOLD_DEVICE --> |
| <item>15</item> <!-- WAKE_REASON_TAP --> |
| <item>16</item> <!-- WAKE_REASON_LIFT --> |
| <item>17</item> <!-- WAKE_REASON_BIOMETRIC --> |
| </integer-array> |
| |
| <!-- Whether to support posture listening for face auth, default is 0(DEVICE_POSTURE_UNKNOWN) |
| means systemui will try listening on all postures. |
| 0 : DEVICE_POSTURE_UNKNOWN |
| 1 : DEVICE_POSTURE_CLOSED |
| 2 : DEVICE_POSTURE_HALF_OPENED |
| 3 : DEVICE_POSTURE_OPENED |
| 4 : DEVICE_POSTURE_FLIPPED |
| --> |
| <integer name="config_face_auth_supported_posture">0</integer> |
| |
| <!-- Components to allow running fingerprint listening if their activity is occluding the lock screen. --> |
| <string-array name="config_fingerprint_listen_on_occluding_activity_packages" translatable="false"> |
| </string-array> |
| |
| <!-- Whether the communal service should be enabled --> |
| <bool name="config_communalServiceEnabled">false</bool> |
| |
| <!-- Name of the database that stores info of widgets shown on glanceable hub --> |
| <string name="config_communalDatabase" translatable="false">communal_db</string> |
| <!-- Component names of allowed communal widgets --> |
| <string-array name="config_communalWidgetAllowlist" translatable="false" /> |
| |
| <!-- Component name of communal source service --> |
| <string name="config_communalSourceComponent" translatable="false">@null</string> |
| |
| <!-- This value is used when calculating whether the device is in ambient light mode. It is |
| light mode when the light sensor sample value exceeds above this value. --> |
| <item name="config_ambientLightModeThreshold" translatable="false" format="float" type="dimen"> |
| 0.8 |
| </item> |
| |
| <!-- This value is used when calculating whether the device is in ambient dark mode. It is |
| dark mode when the light sensor sample value drops below this value. --> |
| <item name="config_ambientDarkModeThreshold" translatable="false" format="float" type="dimen"> |
| 0.4 |
| </item> |
| |
| <!-- This value is used when calculating whether the device is in ambient light mode. Each |
| sample contains light sensor events from this span of time duration. --> |
| <integer name="config_ambientLightModeSamplingSpanMillis">10000</integer> |
| |
| <!-- This value is used when calculating whether the device is in ambient dark mode. Each |
| sample contains light sensor events from this span of time duration. --> |
| <integer name="config_ambientDarkModeSamplingSpanMillis">2000</integer> |
| |
| <!-- This value is used when calculating whether the device is in ambient light mode. The |
| samples are collected at this frequency. --> |
| <integer name="config_ambientLightModeSamplingFrequencyMillis">1000</integer> |
| |
| <!-- This value is used when calculating whether the device is in ambient dark mode. The |
| samples are collected at this frequency. --> |
| <integer name="config_ambientDarkModeSamplingFrequencyMillis">500</integer> |
| |
| <!-- The maximum number of attempts to reconnect to the communal source target after failing |
| to connect --> |
| <integer name="config_communalSourceMaxReconnectAttempts">10</integer> |
| |
| <!-- The initial amount of time (in milliseconds) before attempting to reconnect to a communal |
| source. This value is used as the base value in an exponential backoff in subsequent |
| attempts. --> |
| <integer name="config_communalSourceReconnectBaseDelay">1000</integer> |
| |
| <!-- The minimum time in milliseconds for a connection to be considered connected. Any time --> |
| <integer name="config_connectionMinDuration">1000</integer> |
| |
| <!-- Flag to activate notification to contents feature --> |
| <bool name="config_notificationToContents">false</bool> |
| |
| <!-- The rounded corner drawable for each display in a multi-display device. |
| {@see com.android.internal.R.array#config_displayUniqueIdArray} --> |
| <array name="config_roundedCornerDrawableArray"> |
| <item>@drawable/rounded</item> |
| <item>@drawable/rounded_secondary</item> |
| </array> |
| |
| <!-- The top rounded corner drawable for each display in a multi-display device. |
| {@see com.android.internal.R.array#config_displayUniqueIdArray} --> |
| <array name="config_roundedCornerTopDrawableArray"> |
| <item>@drawable/rounded_corner_top</item> |
| <item>@drawable/rounded_corner_top_secondary</item> |
| </array> |
| |
| <!-- The bottom rounded corner drawable for each display in a multi-display device. |
| {@see com.android.internal.R.array#config_displayUniqueIdArray} --> |
| <array name="config_roundedCornerBottomDrawableArray"> |
| <item>@drawable/rounded_corner_bottom</item> |
| <item>@drawable/rounded_corner_bottom_secondary</item> |
| </array> |
| |
| <!-- Flag to enable privacy dot views, it shall be true for normal case --> |
| <bool name="config_enablePrivacyDot">true</bool> |
| |
| <!-- Flag to enable privacy chip animation, it shall be true for normal case --> |
| <bool name="config_enablePrivacyChipAnimation">true</bool> |
| |
| <!-- Class for the communal source connector to be used --> |
| <string name="config_communalSourceConnector" translatable="false"></string> |
| |
| <!-- How often in milliseconds to jitter the dream overlay in order to avoid burn-in. --> |
| <integer name="config_dreamOverlayBurnInProtectionUpdateIntervalMillis">1000</integer> |
| |
| <!-- How long in milliseconds before full burn-in protection is achieved. --> |
| <integer name="config_dreamOverlayMillisUntilFullJitter">240000</integer> |
| |
| <integer name="complicationFadeOutMs">500</integer> |
| |
| <integer name="complicationFadeInMs">500</integer> |
| |
| <integer name="complicationRestoreMs">1000</integer> |
| |
| <integer name="complicationFadeOutDelayMs">200</integer> |
| |
| <!-- Duration in milliseconds of the dream in un-blur animation. --> |
| <integer name="config_dreamOverlayInBlurDurationMs">250</integer> |
| <!-- Duration in milliseconds of the dream in complications fade-in animation. --> |
| <integer name="config_dreamOverlayInComplicationsDurationMs">250</integer> |
| <!-- Duration in milliseconds of the y-translation animation when entering a dream --> |
| <integer name="config_dreamOverlayInTranslationYDurationMs">1167</integer> |
| |
| <!-- Delay in milliseconds before switching to the dock user and dreaming if a secondary user is |
| active when the device is locked and docked. 0 indicates disabled. Default is 1 minute. --> |
| <integer name="config_defaultDockUserTimeoutMs">60000</integer> |
| |
| <!-- Icons that don't show in a collapsed non-keyguard statusbar --> |
| <string-array name="config_collapsed_statusbar_icon_blocklist" translatable="false"> |
| <item>@*android:string/status_bar_volume</item> |
| <item>@*android:string/status_bar_alarm_clock</item> |
| <item>@*android:string/status_bar_call_strength</item> |
| </string-array> |
| |
| <!-- Icons that don't show in a collapsed statusbar on keyguard --> |
| <string-array name="config_keyguard_statusbar_icon_blocklist" translatable="false"> |
| <item>@*android:string/status_bar_volume</item> |
| <item>@*android:string/status_bar_alarm_clock</item> |
| <item>@*android:string/status_bar_call_strength</item> |
| </string-array> |
| |
| <!-- Packages of SystemUI --> |
| <string-array name="system_ui_packages" translatable="false"> |
| <item>com.android.keyguard</item> |
| <item>com.android.systemui</item> |
| </string-array> |
| |
| <!-- Whether the device should display hotspot UI. If true, UI will display only when tethering |
| is available. If false, UI will never show regardless of tethering availability" --> |
| <bool name="config_show_wifi_tethering">true</bool> |
| |
| <!-- A collection of "slots" for placing quick affordance actions on the lock screen when the |
| device is locked. Each item is a string consisting of two parts, separated by the ':' character. |
| The first part is the unique ID for the slot, it is not a human-visible name, but should still |
| be unique across all slots specified. The second part is the capacity and must be a positive |
| integer; this is how many quick affordance actions that user is allowed to add to the slot. --> |
| <string-array name="config_keyguardQuickAffordanceSlots" translatable="false"> |
| <item>bottom_start:1</item> |
| <item>bottom_end:1</item> |
| </string-array> |
| |
| <!-- A collection of defaults for the quick affordances on the lock screen. Each item must be a |
| string with two parts: the ID of the slot and the comma-delimited list of affordance IDs, |
| separated by a colon ':' character. For example: <item>bottom_end:home,wallet</item>. The |
| default is displayed by System UI as long as the user hasn't made a different choice for that |
| slot. If the user did make a choice, even if the choice is the "None" option, the default is |
| ignored. --> |
| <string-array name="config_keyguardQuickAffordanceDefaults" translatable="false"> |
| <item>bottom_start:home</item> |
| <item>bottom_end:wallet</item> |
| </string-array> |
| |
| <!-- Package name for the app that implements the wallpaper picker. --> |
| <string name="config_wallpaperPickerPackage" translatable="false"> |
| com.android.wallpaper |
| </string> |
| |
| <!-- Whether the floating rotation button should be on the left/right in the device's natural |
| orientation --> |
| <bool name="floating_rotation_button_position_left">true</bool> |
| |
| <!-- Configuration to set Learn more in device logs as URL link --> |
| <bool name="log_access_confirmation_learn_more_as_link">true</bool> |
| |
| <!-- [START] MULTI SHADE --> |
| <!-- Whether the device should use dual shade. If false, the device uses single shade. --> |
| <bool name="dual_shade_enabled">true</bool> |
| <!-- |
| When in dual shade, where should the horizontal split be on the screen to help determine whether |
| the user is pulling down the left shade or the right shade. Must be between 0.0 and 1.0, |
| inclusive. In other words: how much of the left-hand side of the screen, when pulled down on, |
| would reveal the left-hand side shade. |
| |
| More concretely: |
| A value of 0.67 means that the left two-thirds of the screen are dedicated to the left-hand side |
| shade and the remaining one-third of the screen on the right is dedicated to the right-hand side |
| shade. |
| --> |
| <dimen name="dual_shade_split_fraction">0.67</dimen> |
| <!-- Width of the left-hand side shade. --> |
| <dimen name="left_shade_width">436dp</dimen> |
| <!-- Width of the right-hand side shade. --> |
| <dimen name="right_shade_width">436dp</dimen> |
| <!-- |
| Opaque version of the scrim that shows up behind dual shades. The alpha channel is driven |
| programmatically. |
| --> |
| <color name="opaque_scrim">#D9D9D9</color> |
| <!-- Maximum opacity when the scrim that shows up behind the dual shades is fully visible. --> |
| <dimen name="dual_shade_scrim_alpha">0.1</dimen> |
| <!-- |
| The amount that the user must swipe down when the shade is fully collapsed to automatically |
| expand once the user lets go of the shade. If the user swipes less than this amount, the shade |
| will automatically revert back to fully collapsed once the user stops swiping. |
| --> |
| <dimen name="shade_swipe_expand_threshold">0.5</dimen> |
| <!-- |
| The amount that the user must swipe up when the shade is fully expanded to automatically |
| collapse once the user lets go of the shade. If the user swipes less than this amount, the shade |
| will automatically revert back to fully expanded once the user stops swiping. |
| --> |
| <dimen name="shade_swipe_collapse_threshold">0.5</dimen> |
| <!-- [END] MULTI SHADE --> |
| |
| <!-- Time (in ms) to delay the bouncer views from showing when passive auth may be used for |
| device entry. --> |
| <integer name="primary_bouncer_passive_auth_delay">500</integer> |
| |
| <!-- |
| The package name of the app store app. If empty, features using this should be gracefully |
| disabled. |
| --> |
| <string name="config_appStorePackageName" translatable="false"></string> |
| |
| <!-- Template for a link that leads to an app page in the relevant app store. If empty, |
| features using this should be gracefully disabled. If not empty, it must include a |
| "$packageName" part that will be replaced by the code with the package name of the target app. |
| --> |
| <string name="config_appStoreAppLinkTemplate" translatable="false"></string> |
| |
| <!-- Flag controlling whether visual query attention detection has been enabled. --> |
| <bool name="config_enableVisualQueryAttentionDetection">false</bool> |
| |
| <!-- Whether to show bottom sheets edge to edge --> |
| <bool name="config_edgeToEdgeBottomSheetDialog">true</bool> |
| |
| <!-- |
| Time in milliseconds the user has to touch the side FPS sensor to successfully authenticate when |
| the screen is turned off with AOD not enabled. |
| TODO(b/302332976) Get this value from the HAL if they can provide an API for it. |
| --> |
| <integer name="config_restToUnlockDurationScreenOff">500</integer> |
| <!-- |
| Time in milliseconds the user has to touch the side FPS sensor to successfully authenticate |
| TODO(b/302332976) Get this value from the HAL if they can provide an API for it. |
| --> |
| <integer name="config_restToUnlockDurationDefault">300</integer> |
| |
| <!-- |
| Width in pixels of the Side FPS sensor. |
| --> |
| <integer name="config_sfpsSensorWidth">200</integer> |
| |
| <!-- Component name for Home Panel Dream --> |
| <string name="config_homePanelDreamComponent" translatable="false"> |
| @null |
| </string> |
| |
| <!-- |
| They are service names that, if enabled, will cause the magnification settings button |
| to never hide after timeout. |
| --> |
| <string-array name="services_always_show_magnification_settings" translatable="false"> |
| <item>com.android.switchaccess.SwitchAccessService</item> |
| <item>com.google.android.apps.accessibility.voiceaccess.JustSpeakService</item> |
| </string-array> |
| </resources> |