/*
 * WPA Supplicant - Basic mesh mode routines
 * Copyright (c) 2013-2014, cozybit, Inc.  All rights reserved.
 *
 * This software may be distributed under the terms of the BSD license.
 * See README for more details.
 */

#include "utils/includes.h"

#include "utils/common.h"
#include "utils/eloop.h"
#include "utils/uuid.h"
#include "common/ieee802_11_defs.h"
#include "common/wpa_ctrl.h"
#include "common/hw_features_common.h"
#include "ap/sta_info.h"
#include "ap/hostapd.h"
#include "ap/ieee802_11.h"
#include "config_ssid.h"
#include "config.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "notify.h"
#include "ap.h"
#include "mesh_mpm.h"
#include "mesh_rsn.h"
#include "mesh.h"


static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s,
				       bool also_clear_hostapd)
{
	wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh,
					 also_clear_hostapd);

	if (also_clear_hostapd) {
		wpa_s->ifmsh = NULL;
		wpa_s->current_ssid = NULL;
		os_free(wpa_s->mesh_params);
		wpa_s->mesh_params = NULL;
	}

	os_free(wpa_s->mesh_rsn);
	wpa_s->mesh_rsn = NULL;

	if (!also_clear_hostapd)
		wpa_supplicant_leave_mesh(wpa_s, false);
}


void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
				      struct hostapd_iface *ifmsh,
				      bool also_clear_hostapd)
{
	if (!ifmsh)
		return;

	if (ifmsh->mconf) {
		mesh_mpm_deinit(wpa_s, ifmsh);
		if (ifmsh->mconf->rsn_ie) {
			ifmsh->mconf->rsn_ie = NULL;
			/* We cannot free this struct
			 * because wpa_authenticator on
			 * hostapd side is also using it
			 * for now just set to NULL and
			 * let hostapd code free it.
			 */
		}
		os_free(ifmsh->mconf);
		ifmsh->mconf = NULL;
	}

	/* take care of shared data */
	if (also_clear_hostapd) {
		hostapd_interface_deinit(ifmsh);
		hostapd_interface_free(ifmsh);
	}
}


static struct mesh_conf * mesh_config_create(struct wpa_supplicant *wpa_s,
					     struct wpa_ssid *ssid)
{
	struct mesh_conf *conf;
	int cipher;

	conf = os_zalloc(sizeof(struct mesh_conf));
	if (!conf)
		return NULL;

	os_memcpy(conf->meshid, ssid->ssid, ssid->ssid_len);
	conf->meshid_len = ssid->ssid_len;

	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE)
		conf->security |= MESH_CONF_SEC_AUTH |
			MESH_CONF_SEC_AMPE;
	else
		conf->security |= MESH_CONF_SEC_NONE;
	conf->ieee80211w = ssid->ieee80211w;
	if (conf->ieee80211w == MGMT_FRAME_PROTECTION_DEFAULT) {
		if (wpa_s->drv_enc & WPA_DRIVER_CAPA_ENC_BIP)
			conf->ieee80211w = wpa_s->conf->pmf;
		else
			conf->ieee80211w = NO_MGMT_FRAME_PROTECTION;
	}
#ifdef CONFIG_OCV
	conf->ocv = ssid->ocv;
#endif /* CONFIG_OCV */

	cipher = wpa_pick_pairwise_cipher(ssid->pairwise_cipher, 0);
	if (cipher < 0 || cipher == WPA_CIPHER_TKIP) {
		wpa_msg(wpa_s, MSG_INFO, "mesh: Invalid pairwise cipher");
		os_free(conf);
		return NULL;
	}
	conf->pairwise_cipher = cipher;

	cipher = wpa_pick_group_cipher(ssid->group_cipher);
	if (cipher < 0 || cipher == WPA_CIPHER_TKIP ||
	    cipher == WPA_CIPHER_GTK_NOT_USED) {
		wpa_msg(wpa_s, MSG_INFO, "mesh: Invalid group cipher");
		os_free(conf);
		return NULL;
	}

	conf->group_cipher = cipher;
	if (conf->ieee80211w != NO_MGMT_FRAME_PROTECTION) {
		if (ssid->group_mgmt_cipher == WPA_CIPHER_BIP_GMAC_128 ||
		    ssid->group_mgmt_cipher == WPA_CIPHER_BIP_GMAC_256 ||
		    ssid->group_mgmt_cipher == WPA_CIPHER_BIP_CMAC_256)
			conf->mgmt_group_cipher = ssid->group_mgmt_cipher;
		else
			conf->mgmt_group_cipher = WPA_CIPHER_AES_128_CMAC;
	}

	/* defaults */
	conf->mesh_pp_id = MESH_PATH_PROTOCOL_HWMP;
	conf->mesh_pm_id = MESH_PATH_METRIC_AIRTIME;
	conf->mesh_cc_id = 0;
	conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
	conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
	conf->mesh_fwding = ssid->mesh_fwding;
	conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
	conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
	conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
	conf->dot11MeshHoldingTimeout = ssid->dot11MeshHoldingTimeout;

	return conf;
}


static void wpas_mesh_copy_groups(struct hostapd_data *bss,
				  struct wpa_supplicant *wpa_s)
{
	int num_groups;
	size_t groups_size;

	for (num_groups = 0; wpa_s->conf->sae_groups[num_groups] > 0;
	     num_groups++)
		;

	groups_size = (num_groups + 1) * sizeof(wpa_s->conf->sae_groups[0]);
	bss->conf->sae_groups = os_malloc(groups_size);
	if (bss->conf->sae_groups)
		os_memcpy(bss->conf->sae_groups, wpa_s->conf->sae_groups,
			  groups_size);
}


static int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s)
{
	struct hostapd_iface *ifmsh = wpa_s->ifmsh;
	struct wpa_ssid *ssid = wpa_s->current_ssid;
	struct hostapd_data *bss = ifmsh->bss[0];
	static int default_groups[] = { 19, 20, 21, 25, 26, -1 };
	const char *password;
	size_t len;

	password = ssid->sae_password;
	if (!password)
		password = ssid->passphrase;
	if (!password) {
		wpa_printf(MSG_ERROR,
			   "mesh: Passphrase for SAE not configured");
		return -1;
	}

	bss->conf->wpa = ssid->proto;
	bss->conf->wpa_key_mgmt = ssid->key_mgmt;

	if (wpa_s->conf->sae_groups && wpa_s->conf->sae_groups[0] > 0) {
		wpas_mesh_copy_groups(bss, wpa_s);
	} else {
		bss->conf->sae_groups = os_memdup(default_groups,
						  sizeof(default_groups));
		if (!bss->conf->sae_groups)
			return -1;
	}

	len = os_strlen(password);
	bss->conf->ssid.wpa_passphrase = dup_binstr(password, len);

	wpa_s->mesh_rsn = mesh_rsn_auth_init(wpa_s, ifmsh->mconf);
	return !wpa_s->mesh_rsn ? -1 : 0;
}


static int wpas_mesh_update_freq_params(struct wpa_supplicant *wpa_s)
{
	struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
	struct hostapd_iface *ifmsh = wpa_s->ifmsh;
	struct he_capabilities *he_capab = NULL;

	if (ifmsh->current_mode)
		he_capab = &ifmsh->current_mode->he_capab[IEEE80211_MODE_MESH];

	if (hostapd_set_freq_params(
		    &params->freq,
		    ifmsh->conf->hw_mode,
		    ifmsh->freq,
		    ifmsh->conf->channel,
		    ifmsh->conf->enable_edmg,
		    ifmsh->conf->edmg_channel,
		    ifmsh->conf->ieee80211n,
		    ifmsh->conf->ieee80211ac,
		    ifmsh->conf->ieee80211ax,
		    false,
		    ifmsh->conf->secondary_channel,
		    hostapd_get_oper_chwidth(ifmsh->conf),
		    hostapd_get_oper_centr_freq_seg0_idx(ifmsh->conf),
		    hostapd_get_oper_centr_freq_seg1_idx(ifmsh->conf),
		    ifmsh->conf->vht_capab,
		    he_capab, NULL)) {
		wpa_printf(MSG_ERROR, "Error updating mesh frequency params");
		wpa_supplicant_mesh_deinit(wpa_s, true);
		return -1;
	}

	return 0;
}


static int wpas_mesh_complete(struct wpa_supplicant *wpa_s)
{
	struct hostapd_iface *ifmsh = wpa_s->ifmsh;
	struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
	struct wpa_ssid *ssid = wpa_s->current_ssid;
	int ret;

	if (!params || !ssid || !ifmsh) {
		wpa_printf(MSG_ERROR, "mesh: %s called without active mesh",
			   __func__);
		return -1;
	}

	/*
	 * Update channel configuration if the channel has changed since the
	 * initial setting, i.e., due to DFS radar detection during CAC.
	 */
	if (ifmsh->freq > 0 && ifmsh->freq != params->freq.freq) {
		wpa_s->assoc_freq = ifmsh->freq;
		ssid->frequency = ifmsh->freq;
		if (wpas_mesh_update_freq_params(wpa_s) < 0)
			return -1;
	}

	if (ifmsh->mconf->security != MESH_CONF_SEC_NONE &&
	    wpas_mesh_init_rsn(wpa_s)) {
		wpa_printf(MSG_ERROR,
			   "mesh: RSN initialization failed - deinit mesh");
		wpa_supplicant_mesh_deinit(wpa_s, false);
		return -1;
	}

	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
		wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
		wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
		wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
	}

	params->ies = ifmsh->mconf->rsn_ie;
	params->ie_len = ifmsh->mconf->rsn_ie_len;
	params->basic_rates = ifmsh->basic_rates;
	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
	params->conf.ht_opmode = ifmsh->bss[0]->iface->ht_op_mode;

	wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
		wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
	ret = wpa_drv_join_mesh(wpa_s, params);
	if (ret)
		wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d", ret);

	/* hostapd sets the interface down until we associate */
	wpa_drv_set_operstate(wpa_s, 1);

	if (!ret) {
		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);

		wpa_msg(wpa_s, MSG_INFO, MESH_GROUP_STARTED "ssid=\"%s\" id=%d",
			wpa_ssid_txt(ssid->ssid, ssid->ssid_len),
			ssid->id);
		wpas_notify_mesh_group_started(wpa_s, ssid);
	}

	return ret;
}


static void wpas_mesh_complete_cb(void *arg)
{
	struct wpa_supplicant *wpa_s = arg;

	wpas_mesh_complete(wpa_s);
}


static int wpa_supplicant_mesh_enable_iface_cb(struct hostapd_iface *ifmsh)
{
	struct wpa_supplicant *wpa_s = ifmsh->owner;
	struct hostapd_data *bss;

	ifmsh->mconf = mesh_config_create(wpa_s, wpa_s->current_ssid);

	bss = ifmsh->bss[0];
	bss->msg_ctx = wpa_s;
	os_memcpy(bss->own_addr, wpa_s->own_addr, ETH_ALEN);
	bss->driver = wpa_s->driver;
	bss->drv_priv = wpa_s->drv_priv;
	bss->iface = ifmsh;
	bss->mesh_sta_free_cb = mesh_mpm_free_sta;
	bss->setup_complete_cb = wpas_mesh_complete_cb;
	bss->setup_complete_cb_ctx = wpa_s;

	bss->conf->start_disabled = 1;
	bss->conf->mesh = MESH_ENABLED;
	bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;

	if (wpa_drv_init_mesh(wpa_s)) {
		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
		return -1;
	}

	if (hostapd_setup_interface(ifmsh)) {
		wpa_printf(MSG_ERROR,
			   "Failed to initialize hostapd interface for mesh");
		return -1;
	}

	return 0;
}


static int wpa_supplicant_mesh_disable_iface_cb(struct hostapd_iface *ifmsh)
{
	struct wpa_supplicant *wpa_s = ifmsh->owner;
	size_t j;

	wpa_supplicant_mesh_deinit(wpa_s, false);

#ifdef NEED_AP_MLME
	for (j = 0; j < ifmsh->num_bss; j++)
		hostapd_cleanup_cs_params(ifmsh->bss[j]);
#endif /* NEED_AP_MLME */

	/* Same as hostapd_interface_deinit() without deinitializing control
	 * interface */
	for (j = 0; j < ifmsh->num_bss; j++) {
		struct hostapd_data *hapd = ifmsh->bss[j];

		hostapd_bss_deinit_no_free(hapd);
		hostapd_free_hapd_data(hapd);
	}

	hostapd_cleanup_iface_partial(ifmsh);

	return 0;
}


static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
				    struct wpa_ssid *ssid,
				    struct hostapd_freq_params *freq)
{
	struct hostapd_iface *ifmsh;
	struct hostapd_data *bss;
	struct hostapd_config *conf;
	struct mesh_conf *mconf;
	int basic_rates_erp[] = { 10, 20, 55, 60, 110, 120, 240, -1 };
	int rate_len;
	int frequency;

	if (!wpa_s->conf->user_mpm) {
		/* not much for us to do here */
		wpa_msg(wpa_s, MSG_WARNING,
			"user_mpm is not enabled in configuration");
		return 0;
	}

	wpa_s->ifmsh = ifmsh = hostapd_alloc_iface();
	if (!ifmsh)
		return -ENOMEM;

	ifmsh->owner = wpa_s;
	ifmsh->drv_flags = wpa_s->drv_flags;
	ifmsh->drv_flags2 = wpa_s->drv_flags2;
	ifmsh->num_bss = 1;
	ifmsh->enable_iface_cb = wpa_supplicant_mesh_enable_iface_cb;
	ifmsh->disable_iface_cb = wpa_supplicant_mesh_disable_iface_cb;
	ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
			       sizeof(struct hostapd_data *));
	if (!ifmsh->bss)
		goto out_free;

	ifmsh->bss[0] = bss = hostapd_alloc_bss_data(NULL, NULL, NULL);
	if (!bss)
		goto out_free;

	ifmsh->bss[0]->msg_ctx = wpa_s;
	os_memcpy(bss->own_addr, wpa_s->own_addr, ETH_ALEN);
	bss->driver = wpa_s->driver;
	bss->drv_priv = wpa_s->drv_priv;
	bss->iface = ifmsh;
	bss->mesh_sta_free_cb = mesh_mpm_free_sta;
	bss->setup_complete_cb = wpas_mesh_complete_cb;
	bss->setup_complete_cb_ctx = wpa_s;
	frequency = ssid->frequency;
	if (frequency != freq->freq &&
	    frequency == freq->freq + freq->sec_channel_offset * 20) {
		wpa_printf(MSG_DEBUG, "mesh: pri/sec channels switched");
		frequency = freq->freq;
		ssid->frequency = frequency;
	}
	wpa_s->assoc_freq = frequency;
	wpa_s->current_ssid = ssid;

	/* setup an AP config for auth processing */
	conf = hostapd_config_defaults();
	if (!conf)
		goto out_free;

	if (is_6ghz_freq(freq->freq)) {
		/*
		 * IEEE Std 802.11ax-2021, 12.12.2:
		 * The STA shall use management frame protection (MFPR=1) when
		 * using RSN.
		 */
		ssid->ieee80211w = MGMT_FRAME_PROTECTION_REQUIRED;

		/* Set mandatory op_class parameter for setting up BSS */
		switch (freq->bandwidth) {
		case 20:
			if (freq->freq == 5935)
				conf->op_class = 136;
			else
				conf->op_class = 131;
			break;
		case 40:
			conf->op_class = 132;
			break;
		case 80:
			conf->op_class = 133;
			break;
		case 160:
			conf->op_class = 134;
			break;
		default:
			conf->op_class = 131;
			break;
		}
	}

	bss->conf = *conf->bss;
	bss->conf->start_disabled = 1;
	bss->conf->mesh = MESH_ENABLED;
	bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
	bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding;

	if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
			     wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
		conf->ieee80211h = 1;
		conf->ieee80211d = 1;
		conf->country[0] = wpa_s->conf->country[0];
		conf->country[1] = wpa_s->conf->country[1];
		conf->country[2] = ' ';
		wpa_s->mesh_params->handle_dfs = true;
	}

	bss->iconf = conf;
	ifmsh->conf = conf;

	ifmsh->bss[0]->max_plinks = wpa_s->conf->max_peer_links;
	ifmsh->bss[0]->dot11RSNASAERetransPeriod =
		wpa_s->conf->dot11RSNASAERetransPeriod;
	os_strlcpy(bss->conf->iface, wpa_s->ifname, sizeof(bss->conf->iface));

	mconf = mesh_config_create(wpa_s, ssid);
	if (!mconf)
		goto out_free;
	ifmsh->mconf = mconf;

	/* need conf->hw_mode for supported rates. */
	conf->hw_mode = ieee80211_freq_to_chan(frequency, &conf->channel);
	if (conf->hw_mode == NUM_HOSTAPD_MODES) {
		wpa_printf(MSG_ERROR, "Unsupported mesh mode frequency: %d MHz",
			   frequency);
		goto out_free;
	}

	if (ssid->mesh_basic_rates == NULL) {
		/*
		 * XXX: Hack! This is so an MPM which correctly sets the ERP
		 * mandatory rates as BSSBasicRateSet doesn't reject us. We
		 * could add a new hw_mode HOSTAPD_MODE_IEEE80211G_ERP, but
		 * this is way easier. This also makes our BSSBasicRateSet
		 * advertised in beacons match the one in peering frames, sigh.
		 */
		if (conf->hw_mode == HOSTAPD_MODE_IEEE80211G) {
			conf->basic_rates = os_memdup(basic_rates_erp,
						      sizeof(basic_rates_erp));
			if (!conf->basic_rates)
				goto out_free;
		}
	} else {
		rate_len = 0;
		while (1) {
			if (ssid->mesh_basic_rates[rate_len] < 1)
				break;
			rate_len++;
		}
		conf->basic_rates = os_calloc(rate_len + 1, sizeof(int));
		if (conf->basic_rates == NULL)
			goto out_free;
		os_memcpy(conf->basic_rates, ssid->mesh_basic_rates,
			  rate_len * sizeof(int));
		conf->basic_rates[rate_len] = -1;
	}

	/* While it can enhance performance to switch the primary channel, which
	 * is also the secondary channel of another network at the same time),
	 * to the other primary channel, problems exist with this in mesh
	 * networks.
	 *
	 * Example with problems:
	 *     - 3 mesh nodes M1-M3, freq (5200, 5180)
	 *     - other node O1, e.g. AP mode, freq (5180, 5200),
	 * Locations: O1 M1      M2      M3
	 *
	 * M3 can only send frames to M1 over M2, no direct connection is
	 * possible
	 * Start O1, M1 and M3 first, M1 or O1 will switch channels to align
	 * with* each other. M3 does not swap, because M1 or O1 cannot be
	 * reached. M2 is started afterwards and can either connect to M3 or M1
	 * because of this primary secondary channel switch.
	 *
	 * Solutions: (1) central coordination -> not always possible
	 *            (2) disable pri/sec channel switch in mesh networks
	 *
	 * In AP mode, when all nodes can work independently, this poses of
	 * course no problem, therefore disable it only in mesh mode. */
	conf->no_pri_sec_switch = 1;
	wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);

	if (wpa_drv_init_mesh(wpa_s)) {
		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
		return -1;
	}

	if (hostapd_setup_interface(ifmsh)) {
		wpa_printf(MSG_ERROR,
			   "Failed to initialize hostapd interface for mesh");
		return -1;
	}

	return 0;
out_free:
	wpa_supplicant_mesh_deinit(wpa_s, true);
	return -ENOMEM;
}


void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
			  const u8 *ies, size_t ie_len)
{
	struct ieee802_11_elems elems;

	wpa_msg(wpa_s, MSG_INFO,
		"new peer notification for " MACSTR, MAC2STR(addr));

	if (ieee802_11_parse_elems(ies, ie_len, &elems, 0) == ParseFailed) {
		wpa_msg(wpa_s, MSG_INFO, "Could not parse beacon from " MACSTR,
			MAC2STR(addr));
		return;
	}
	wpa_mesh_new_mesh_peer(wpa_s, addr, &elems);
}


void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
				     struct wpabuf **extra_ie)
{
	/* EID + 0-length (wildcard) mesh-id */
	size_t ielen = 2;

	if (wpabuf_resize(extra_ie, ielen) == 0) {
		wpabuf_put_u8(*extra_ie, WLAN_EID_MESH_ID);
		wpabuf_put_u8(*extra_ie, 0);
	}
}


int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
			     struct wpa_ssid *ssid)
{
	struct wpa_driver_mesh_join_params *params = os_zalloc(sizeof(*params));
	int ret = 0;

	if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency ||
	    !params) {
		ret = -ENOENT;
		os_free(params);
		goto out;
	}

	wpa_supplicant_mesh_deinit(wpa_s, true);

	wpa_s->pairwise_cipher = WPA_CIPHER_NONE;
	wpa_s->group_cipher = WPA_CIPHER_NONE;
	wpa_s->mgmt_group_cipher = 0;

	params->meshid = ssid->ssid;
	params->meshid_len = ssid->ssid_len;
	ibss_mesh_setup_freq(wpa_s, ssid, &params->freq);
	wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
	wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;
	wpa_s->mesh_he_enabled = !!params->freq.he_enabled;
	if (params->freq.ht_enabled && params->freq.sec_channel_offset)
		ssid->ht40 = params->freq.sec_channel_offset;

	if (wpa_s->mesh_vht_enabled) {
		ssid->vht = 1;
		ssid->vht_center_freq1 = params->freq.center_freq1;
		switch (params->freq.bandwidth) {
		case 80:
			if (params->freq.center_freq2) {
				ssid->max_oper_chwidth = CHANWIDTH_80P80MHZ;
				ssid->vht_center_freq2 =
					params->freq.center_freq2;
			} else {
				ssid->max_oper_chwidth = CHANWIDTH_80MHZ;
			}
			break;
		case 160:
			ssid->max_oper_chwidth = CHANWIDTH_160MHZ;
			break;
		default:
			ssid->max_oper_chwidth = CHANWIDTH_USE_HT;
			break;
		}
	}
	if (wpa_s->mesh_he_enabled)
		ssid->he = 1;
	if (ssid->beacon_int > 0)
		params->beacon_int = ssid->beacon_int;
	else if (wpa_s->conf->beacon_int > 0)
		params->beacon_int = wpa_s->conf->beacon_int;
	if (ssid->dtim_period > 0)
		params->dtim_period = ssid->dtim_period;
	else if (wpa_s->conf->dtim_period > 0)
		params->dtim_period = wpa_s->conf->dtim_period;
	params->conf.max_peer_links = wpa_s->conf->max_peer_links;
	if (ssid->mesh_rssi_threshold < DEFAULT_MESH_RSSI_THRESHOLD) {
		params->conf.rssi_threshold = ssid->mesh_rssi_threshold;
		params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
	}

	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
		params->flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
		params->flags |= WPA_DRIVER_MESH_FLAG_AMPE;
		wpa_s->conf->user_mpm = 1;
	}

	if (wpa_s->conf->user_mpm) {
		params->flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
		params->conf.auto_plinks = 0;
	} else {
		params->flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
		params->conf.auto_plinks = 1;
	}
	params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;

	/* Always explicitely set forwarding to on or off for now */
	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING;
	params->conf.forwarding = ssid->mesh_fwding;

	os_free(wpa_s->mesh_params);
	wpa_s->mesh_params = params;
	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
		wpa_supplicant_leave_mesh(wpa_s, true);
		ret = -1;
		goto out;
	}

out:
	return ret;
}


int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s, bool need_deinit)
{
	int ret = 0;

	wpa_msg(wpa_s, MSG_INFO, "leaving mesh");

	/* Need to send peering close messages first */
	if (need_deinit)
		wpa_supplicant_mesh_deinit(wpa_s, true);

	ret = wpa_drv_leave_mesh(wpa_s);
	if (ret)
		wpa_msg(wpa_s, MSG_ERROR, "mesh leave error=%d", ret);

	wpa_drv_set_operstate(wpa_s, 1);

	return ret;
}


static int mesh_attr_text(const u8 *ies, size_t ies_len, char *buf, char *end)
{
	struct ieee802_11_elems elems;
	char *mesh_id, *pos = buf;
	u8 *bss_basic_rate_set;
	int bss_basic_rate_set_len, ret, i;

	if (ieee802_11_parse_elems(ies, ies_len, &elems, 0) == ParseFailed)
		return -1;

	if (elems.mesh_id_len < 1)
		return 0;

	mesh_id = os_malloc(elems.mesh_id_len + 1);
	if (mesh_id == NULL)
		return -1;

	os_memcpy(mesh_id, elems.mesh_id, elems.mesh_id_len);
	mesh_id[elems.mesh_id_len] = '\0';
	ret = os_snprintf(pos, end - pos, "mesh_id=%s\n", mesh_id);
	os_free(mesh_id);
	if (os_snprintf_error(end - pos, ret))
		return pos - buf;
	pos += ret;

	if (elems.mesh_config_len > 6) {
		ret = os_snprintf(pos, end - pos,
				  "active_path_selection_protocol_id=0x%02x\n"
				  "active_path_selection_metric_id=0x%02x\n"
				  "congestion_control_mode_id=0x%02x\n"
				  "synchronization_method_id=0x%02x\n"
				  "authentication_protocol_id=0x%02x\n"
				  "mesh_formation_info=0x%02x\n"
				  "mesh_capability=0x%02x\n",
				  elems.mesh_config[0], elems.mesh_config[1],
				  elems.mesh_config[2], elems.mesh_config[3],
				  elems.mesh_config[4], elems.mesh_config[5],
				  elems.mesh_config[6]);
		if (os_snprintf_error(end - pos, ret))
			return pos - buf;
		pos += ret;
	}

	bss_basic_rate_set = os_malloc(elems.supp_rates_len +
		elems.ext_supp_rates_len);
	if (bss_basic_rate_set == NULL)
		return -1;

	bss_basic_rate_set_len = 0;
	for (i = 0; i < elems.supp_rates_len; i++) {
		if (elems.supp_rates[i] & 0x80) {
			bss_basic_rate_set[bss_basic_rate_set_len++] =
				(elems.supp_rates[i] & 0x7f) * 5;
		}
	}
	for (i = 0; i < elems.ext_supp_rates_len; i++) {
		if (elems.ext_supp_rates[i] & 0x80) {
			bss_basic_rate_set[bss_basic_rate_set_len++] =
				(elems.ext_supp_rates[i] & 0x7f) * 5;
		}
	}
	if (bss_basic_rate_set_len > 0) {
		ret = os_snprintf(pos, end - pos, "bss_basic_rate_set=%d",
				  bss_basic_rate_set[0]);
		if (os_snprintf_error(end - pos, ret))
			goto fail;
		pos += ret;

		for (i = 1; i < bss_basic_rate_set_len; i++) {
			ret = os_snprintf(pos, end - pos, " %d",
					  bss_basic_rate_set[i]);
			if (os_snprintf_error(end - pos, ret))
				goto fail;
			pos += ret;
		}

		ret = os_snprintf(pos, end - pos, "\n");
		if (os_snprintf_error(end - pos, ret))
			goto fail;
		pos += ret;
	}
fail:
	os_free(bss_basic_rate_set);

	return pos - buf;
}


int wpas_mesh_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
			       char *end)
{
	return mesh_attr_text(ies, ies_len, buf, end);
}


static int wpas_mesh_get_ifname(struct wpa_supplicant *wpa_s, char *ifname,
				size_t len)
{
	char *ifname_ptr = wpa_s->ifname;
	int res;

	res = os_snprintf(ifname, len, "mesh-%s-%d", ifname_ptr,
			  wpa_s->mesh_if_idx);
	if (os_snprintf_error(len, res) ||
	    (os_strlen(ifname) >= IFNAMSIZ &&
	     os_strlen(wpa_s->ifname) < IFNAMSIZ)) {
		/* Try to avoid going over the IFNAMSIZ length limit */
		res = os_snprintf(ifname, len, "mesh-%d", wpa_s->mesh_if_idx);
		if (os_snprintf_error(len, res))
			return -1;
	}
	wpa_s->mesh_if_idx++;
	return 0;
}


int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
			    size_t len)
{
	struct wpa_interface iface;
	struct wpa_supplicant *mesh_wpa_s;
	u8 addr[ETH_ALEN];

	if (ifname[0] == '\0' && wpas_mesh_get_ifname(wpa_s, ifname, len) < 0)
		return -1;

	if (wpa_drv_if_add(wpa_s, WPA_IF_MESH, ifname, NULL, NULL, NULL, addr,
			   NULL) < 0) {
		wpa_printf(MSG_ERROR,
			   "mesh: Failed to create new mesh interface");
		return -1;
	}
	wpa_printf(MSG_INFO, "mesh: Created virtual interface %s addr "
		   MACSTR, ifname, MAC2STR(addr));

	os_memset(&iface, 0, sizeof(iface));
	iface.ifname = ifname;
	iface.driver = wpa_s->driver->name;
	iface.driver_param = wpa_s->conf->driver_param;
	iface.ctrl_interface = wpa_s->conf->ctrl_interface;

	mesh_wpa_s = wpa_supplicant_add_iface(wpa_s->global, &iface, wpa_s);
	if (!mesh_wpa_s) {
		wpa_printf(MSG_ERROR,
			   "mesh: Failed to create new wpa_supplicant interface");
		wpa_drv_if_remove(wpa_s, WPA_IF_MESH, ifname);
		return -1;
	}
	mesh_wpa_s->mesh_if_created = 1;
	return 0;
}


int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr)
{
	return mesh_mpm_close_peer(wpa_s, addr);
}


int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
		       int duration)
{
	return mesh_mpm_connect_peer(wpa_s, addr, duration);
}